What is a Thermocouple and how does it work? Explained DwyerOmega 2018-08-14 | What is a thermocouple and how does it work? A thermocouple is a sensor used to measure temperature. Thermocouples are made with two wires of different metals, joined together at one end to form a junction. Here's your answer in under 1 minute! Want to know more? Visit: bit.ly/2M7kE1rThe junction is placed on the surface or in the environment that's being measured. As the temperature changes, the two dissimilar metals begin to deform, causing a change in resistance. Naturally, a thermocouple outputs a millivolt signal, therefore, as the resistance changes, the change in voltage can be measured. Thermocouples are desirable because they're extremely low cost, simple to use, and are capable of providing accurate readings.
How to Set Up and Use the Model TBU-00 Temperature Transmitter DwyerOmega 2024-10-15 | The Model TBU-00 Temperature Transmitter is a high precision temperature transmitter designed to easily mount in most temperature sensor instrument enclosures. In this video, we show you how to program the TBU, how to wire it into the A-709 weatherproof enclosure, and how to connect it to a DPMX digital panel meter.To learn more or order, please visit: dwyer-inst.com/Product/Temperature/Transmitters/ModelTBU-00
Temperature Transmitter | Model TBU-00 DwyerOmega 2024-10-15 | The Model TBU-00 Temperature Transmitter is a high precision temperature transmitter designed to easily mount in most temperature sensor instrument enclosures. The universal input reduces inventory while the micro-USB port facilitates easy configuration, and calibration in the lab or in the field. The versatile TBU model allows for selection and configuration of input type, measurement range, and calibration. The output can be set as either direct 4 to 20 mA, or reverse 20 to 4 mA, through easy to use configuration software.To learn more or order, please visit: http://www.dwyer-inst.com/Product/Temperature/Transmitters/ModelTBU-00
Differential Pressure Transmitter | Series 629HLP DwyerOmega 2024-10-15 | For more information or to order the Differential Pressure Transmitter, Series 629HLP, please visit http://www.dwyer-inst.com/Product/Pressure/DifferentialPressure/Transmitters/Series629HLPThe Series 629HLP Differential Pressure Transmitters are suitable for measuring over-pressure, under-pressure, and differential pressure in compatible gases and liquids with 1% accuracy. The 629HLP is suitable for all measuring tasks in commercial, industrial or sanitary applications. Dual pressure sensors convert pressure changes into a standard 4 to 20 mA or 0 to 10 VDC output signal.
Flush Tip Submersible Level Transmitter | Series FBLT DwyerOmega 2024-10-14 | To learn more or order the Series FBLT Flush Tip Submersible Level Transmitter please visit http://www.dwyer-inst.com/Product/Level/LevelTransmitters/Submersible/SeriesFBLTThe Series FBLT Submersible Level Transmitter is designed with a flush diaphragm tip that will not clog in harsh applications such as sewage lift stations. Narrow body design allows the FBLT to fit into stilling wells and narrow installations. The FBLT features a robust FKM fluoroelastomer diaphragm that is PTFE coated for a stick resistant surface that will hold up in aggressive fluids. The diaphragm cavity is filled with a gel that will not leak out versus oil or grease that our competitors use. Body is constructed of 316 SS and the cable is either polyurethane or ETFE for more corrosive applications.
Carbon Monoxide Transmitter | Series CMT200 DwyerOmega 2024-10-14 | The Series CMT200 Carbon Monoxide Transmitter provides a field selectable current or voltage output that is proportional to the gas concentration in underground parking garages, vehicle maintenance facilities, or mechanical rooms. A field replaceable, electrochemical sensor provides accurate readings for up to 4 years with proper calibration. Field calibration can be done by using Model GCK-200CO-2000CO2 calibration gas, Model A-507A calibration adapter, and the on board span and zero potentiometers.To learn more or order please visit www.dwyer-inst.com/Product/AirQuality/CarbonMonoxideTransmitters/SeriesCMT200
Carbon Monoxide Transmitter | Series CMT200 DwyerOmega 2024-10-14 | For more information or to order the Carbon Monoxide Transmitter, Series CMT200, please visit www.dwyer-inst.com/Product/AirQuality/CarbonMonoxideTransmitters/SeriesCMT200The Series CMT200 Carbon Monoxide Transmitter provides a field selectable current or voltage output that is proportional to the gas concentration in underground parking garages, vehicle maintenance facilities, or mechanical rooms. A field replaceable, electrochemical sensor provides accurate readings for up to 4 years with proper calibration.
Have a safe, productive and innovative Manufacturing Month from all our teams at DwyerOmega! DwyerOmega 2024-10-11 | October is Manufacturing Month! DwyerOmega celebrates the dedication and values that drive our future in Manufacturing!
How to Set the Tank and Fill Height of a Series ULT Ultrasonic Level Transmitter DwyerOmega 2024-09-27 | The Series 3100D, 3100MP, and 3200G are microprocessor-based high performance transmitters, which have flexible pressure calibration, push button configuration, and programmable using HART® communication.These transmitters are capable of being configured with the zero and span buttons, meaning that a field calibrator is not required for configuration.To learn about the Series 3100D, 3100MP, or 3200G Pressure Transmitters or to order, please visit http://www.dwyer-inst.com/V/Series3100D-3100MP-3200G
Series MSX & MSX Pro Magnesense® Differential Pressure Transmitters DwyerOmega 2024-09-26 | The Series MSX and MSX Pro Magnesense® differential pressure transmitters are ideal for monitoring building control applications. With enhanced accuracy and stability, the MSX Pro is also suitable for high performance, critical environments.To learn more or order, please visit: info.dwyer-inst.com/msx-msxpro
Series RSME Room Status Monitor DwyerOmega 2024-09-26 | The Series RSME room status monitor is designed for low differential pressure applications that require stringent pressure monitoring and alarming.Learn more at dwyer-inst.com/series-rsme-room-status-monitor.html
Room Status Monitors | Series RSMC & RSME DwyerOmega 2024-09-26 | The Series RSME & RSMC StabiliSENSE™ critical room status monitors are ideal for low differential pressure applications that require stringent pressure monitoring and alarming, such as: hospital isolation rooms, pharmaceutical facilities, dental offices, and school nurse offices.To learn more or order, please visit: dwyer-inst.com/Product/Pressure/RoomStatusMonitors
How to Set Up Your Series RSMC StabiliSENSE™ Critical Room Status Monitor DwyerOmega 2024-09-26 | The Series RSMC StabiliSENSE™ critical room status monitor is designed for critical low differential pressure applications that require stringent pressure monitoring and alarming. Watch this video to learn how to set up your room status monitor.Learn more at dwyer-inst.com/series-rsmc-stabilisensetm-critical-room-status-monitor.html
How to Install Your Series RSMC StabiliSENSE™ Critical Room Status Monitor DwyerOmega 2024-09-26 | The Series RSMC StabiliSENSE™ critical room status monitor is designed for critical low differential pressure applications that require stringent pressure monitoring and alarming. Watch this video to learn how to install your room status monitor.Learn more at dwyer-inst.com/series-rsmc-stabilisensetm-critical-room-status-monitor.html
How to Use the TS2-K Configuration Key to Program a Temperature Switch DwyerOmega 2024-09-19 | The Model TS2-K Configuration Key allows users of Dwyer temperature switches to quickly program multiple controllers without external power. With this key, you'll be able to download/upload parameters from one temperature switch to another. The key plugs directly into the back of our temperature controllers, so settings can be configured within minutes (without the need for any extra wires).Watch the video to see how the key works, and be sure to visit our website to order your key to try it out for yourself!Programming Configuration Key: dwyer-inst.com/Product/Temperature/Switches/DigitalPanelMount/ModelTS2-K#ordering
Wall Mount Humidity/Temperature Transmitter | Series RHPLC DwyerOmega 2024-09-19 | For more information or to order the Wall Mount Humidity/Temperature Transmitter, please visit www.dwyer-inst.com/Product/AirQuality/Humidity-TemperatureTransmitters/SeriesRHPLCThe Series RHPLC Wall Mount Humidity/Temperature Transmitter is a compact economical sensor for the building automation market space. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. Each unit utilizes a capacitive polymer sensing element to deliver a proportional analog output. A combination humidity and temperature model can be configured with current, voltage, RTD, or thermistor output. A wide selection of passive RTD or thermistor temperature sensors are available in this series.
Pencil Style Air Velocity Transmitter | Series AVPT DwyerOmega 2024-09-19 | The Series AVPT Pencil Style Air Velocity Transmitter uses thermal anemometer technology to provide high accuracy and stable air velocity measurements in imperial and metric units. The Series AVPT can be configured with either a voltage output or BACnet MS/TP communication to provide universal inputs to a variety of monitoring equipment. Models are available with fixed cable lengths of 20 or 78 inches with flying leads or a 5-pin M12 connector on a 24 inch cable. Probes are available in lengths of 6 or 12 inches. A mounting flange included with the product provides the ability to vary insertion depth.To learn more or order, please visit: http://www.dwyer-inst.com/Product/SeriesAVPT
Carbon Dioxide/Volatile Organic Compound Transmitter | Series CDTV DwyerOmega 2024-09-18 | To learn more or order, please visit dwyer-inst.com/Product/AirQuality/CarbonDioxideTransmitters/SeriesCDTVThe Carbon Dioxide/Volatile Organic Compound (VOC) Transmitter, Series CDTV, reduces energy cost in buildings by lowering the amount of conditioned air based on the occupancy of the space. By sensing both CO2 and VOC, the transmitter can detect fumes that may need to be exhausted during lower occupancy periods.
How to Replace a Series A3000 Photohelic® Pressure Switch/Gage Relay Pack DwyerOmega 2024-09-18 | Question: How do I Replace a Series A3000 Photohelic® Pressure Switch/Gage relay pack?Answer: The only tools you will need are a Philips screwdriver and replacement relay pack. You can order a replacement relay pack by calling customer service or technical support at +1.800.872.9141. Please be ready with a full part number for your A3000 so we can get you the correct relay pack you need. Relay packs can be replaced in 6 easy steps: 1. Remove plastic cover2. Disconnect white communication cable3. Remove relay pack4. Replace with new relay pack5. Reconnect white communication cable6. Replace plastic coverThe Series A3000 Photohelic® Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic® gage design. The Photohelic® switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25 in (0-6 mm) w.c. up to 30 psi (21 bar). To learn more or order visit http://www.dwyer-inst.com/Product/Pressure/DifferentialPressure/Gage-Switches-Dial/SeriesA3000?Query=a3000#literature
Bourdon Tube Pressure Switch | Series DA/DS DwyerOmega 2024-09-18 | The Mercoid DA/DS Series is one of the world’s broadest lines of pressure switches. The DA/DS Series has extremely high sensitivity and great repeatability.To learn more or order, please visit http://www.dwyer-inst.com/Product/Pressure/SinglePressure/Switches/SeriesDA-DS
Smart Pressure Transmitters | Series 3400 and 3500 DwyerOmega 2024-09-17 | To learn more or order the Smart Pressure Transmitters, Series 3400 and 3500, please visit http://www.dwyer-inst.com/Product/Pressure/SinglePressure/TransmittersDwyer’s high-accuracy and versatile 3400 can be utilized to measure gage, vacuum, and absolute pressure of gases, vapors, and liquids in applications such as: water & wastewater, chemical processing, and oil & gas. Alternatively, the 3500 is ideal for differential pressure measurement of gases, vapors, and liquids in applications such as: flow and level regulation, and pump operation.The active element for both transmitters is a piezo-resistant silicon sensor separated from the medium by separate diaphragms and a specially selected type of manometric fluid. The special design of the active sensing element ensures that it is able to withstand pressure surges and overloads. Wetted materials are made of 316L stainless steel, which is strong and durable for use in various applications.
How to Use the Model Digihelic Links™ Data Acquisition and Logging Software DwyerOmega 2024-09-17 | Designed for Communication with Series DH & DHII Digihelic® Differential Pressure Controllers.To learn more or order, please visit dwyer-inst.com/en/digihelic-links.html
Low Air Velocity Transmitter | Series AVLV DwyerOmega 2024-09-17 | The Series AVLV Air Velocity Transmitter quickly and accurately measures air velocity or volumetric flow in imperial or metric units. Simultaneous current and voltage outputs on all models provide universal inputs to monitoring equipment while the output range, units, and 0 to 5/10 VDC output can be configured via local DIP switches. The optional integral display, or the portable remote tool, provide a convenient way to local monitor process values and configure the unit.To learn more or order, please visit: http://www.dwyer-inst.com/Product/SeriesAVLV
Low Air Velocity Transmitter | Series AVLV DwyerOmega 2024-09-17 | The Series AVLV Air Velocity Transmitter quickly and accurately measures air velocity or volumetric flow in imperial or metric units. Simultaneous current and voltage outputs on all models provide universal inputs to monitoring equipment while the output range, units, and 0 to 5/10 VDC output can be configured via local DIP switches. The optional integral display, or the portable remote tool, provide a convenient way to local monitor process values and configure the unit.To learn more or order, please visit: http://www.dwyer-inst.com/Product/SeriesAVLV
Averaging Temperature Sensor | Series TE-A DwyerOmega 2024-09-17 | The Series TE-A Averaging Temperature Sensors are used to measure the temperature in large ducts and air handler units. Bendable aluminum capillaries are available in 6', 12', and 24' lengths. These capillaries consist of four thermistor or RTD sensors which are internally averaged to give a single output signal. Series CC1 mounting brackets are available to mount the capillary to the wall of the duct or air handler without kinking the sensor wires inside the probe. For faster installation, the enclosure has multiple knockouts, wide mounting ears, and a screw-off captured lid.To learn more or order, please visit http://www.dwyer-inst.com/Product/Temperature/Sensors/SeriesTE-A
How to Surface, Flush, or Pipe Mount a Magnehelic® Gage DwyerOmega 2024-09-11 | Before installation, please ensure that the location is free from excessive vibration and that the ambient temperature will not exceed 140°F (60°C). It is also important to avoid direct sunlight, which can accelerate discoloration of the clear plastic cover. Sensing lines may be run at any necessary distance per application requirements. Long tubing lengths will not affect the accuracy of the gage, but will increase response time slightly. Do not restrict lines. If pulsating pressures or vibration causes excessive pointer oscillation, consult the factory for ways to provide additional damping.All standard Magnehelic® Differential Pressure Gages are calibrated with the diaphragm in the vertical position, and should be used in that position for maximum accuracy. If gages are to be used in orientations other than the vertical position, please specify this information when ordering. Many higher range gages will perform within tolerance in other positions after re-zeroing. Low range models of 0.5” w.c. plus 0.25” w.c. and metric equivalents must be used in the vertical position only.All Magnehelic® gages come with standard mounting hardware for the unit to function, including: tubing adapters, screws, and port plugs. Mounting brackets and enclosures are not included and must be ordered separately.To learn more or order, please visit our website at http://www.dwyer-inst.com/Product/Pressure/DifferentialPressure/Gages/Series2000
Magnehelic® Differential Pressure Gage Options DwyerOmega 2024-09-11 | The Series 2000 Magnehelic® Differential Pressure Gage is ideal for applications including: filter monitoring, air velocity with Dwyer pitot tubes, blower vacuum monitoring, fan pressure indication, duct/ room/ building pressures, or clean room positive pressure indication. To learn more or order the Series 2000 please visit the Dwyer website at http://www.dwyer-inst.com/Product/Pressure/DifferentialPressure/Gages/Series2000#ordering
High Accuracy Magnehelic® Differential Pressure Gage: Series 2000-HA DwyerOmega 2024-09-11 | To learn more or order the Series 2000-HA please visit the Dwyer website at dwyer-inst.com/en/series-2000-ha-high-accuracy-magnehelicr-differential-pressure-gage-dwyer.htmlThe Series 2000-HA High Accuracy Magnehelic® Gage is twice as accurate as the standard Magnehelic® gage. The well-engineered High Accuracy Magnehelic® Gage offers a mirrored overlay as standard in order to eliminate any parallax error when taking measurements. A six point calibration certificate is included with each high accuracy model. The rugged IP67 casing helps fully protect against dust and water ingress. The redesigned corrosion resistant brushed 304 stainless steel bezel option offers a clean tapered design, yet minimizes the possibility of any dust accumulation on the edges.
Magnehelic® Differential Pressure Gage | Series 2000 DwyerOmega 2024-09-11 | To learn more or order the Magnehelic® Differential Pressure Gage please visit http://www.dwyer-inst.com/Product/Pressure/DifferentialPressure/Gages/Series2000Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.
How to Replace the Switch of a Series V4 Flotect® Switch DwyerOmega 2024-09-10 | The Series V4 Flotect® Flow Switches are rugged and reliable, ideal for automatically protecting equipment and pipeline systems against damage from reduction or loss of flow. In this video, we'll be demonstrating how to replace a switch in the Series V4.To learn more or order, please visit dwyer-inst.com/Product/Flow/FlowSwitches/Paddle/SeriesV4
Flotect® Vane-Operated Flow Switch | Series V4 DwyerOmega 2024-09-10 | The Series V4 Flotect® Vane-Operated Flow Switch has been time tested in thousands of pipeline installations and processing plants around the world. It is rugged and reliable, ideal for automatically protecting equipment and pipeline systems against damage from reduction or loss of flow.To learn more or order, please visit dwyer-inst.com/Product/Flow/FlowSwitches/Paddle/SeriesV4
Low Limit Freeze Protection Switch | Series DFS2 DwyerOmega 2024-09-10 | Dwyer’s versatile and dependable DFS2 can be utilized to protect from frost build-up in applications such as: heaters in air conditioning units and exchangers in cooling systems. The DFS2 set point can be easily set as low as 34°F or 1°C using the visual set point indicator which can be locked to protect against unauthorized changes. The vapor-filled copper capillary sensing element detects when the temperature drops below the fixed safety value, providing reliable antifreeze protection. The sensing element is offered in lengths of 10 or 20 feet and has a spring protector at the capillary-bellow connection to prevent kinking and damage to the sensing element.For more information or to order visit http://www.dwyer-inst.com/Product/Temperature/Switches/Mechanical/SeriesDFS2
How to Install a Series A-320 Enclosure DwyerOmega 2024-09-10 | Dwyer's Series A-320 Instrument Enclosures protect various instruments in all applications. In this video, we'll be showing you how to install a Series 2000 Magnehelic® gage into a stainless steel enclosure.Steps:1. Loosen the screws in all 4 corners and separate the front of the enclosure from the back. 0:362. Screw the back section of the enclosure to the wall, panel, or other mounting surface. 0:533. Insert the gage into the cutout and using the mounting hardware included with your gage, install the panel mount screws on the back. 1:104. Tighten the long screws against the back of the front cover until the gage is secure. 1:465. Attach the tubes from inside the enclosure to the high and low ports of the gage. 2:086. Reassemble the enclosure on the wall or panel, and reinstall the a screws into the four corners of the front cover. 2:39To learn more or order, please visit: dwyer-inst.com/Product/Pressure/DifferentialPressure/Gages/SeriesA-320
3-Way NPT Brass Ball Valves | Series WE08 & WE35 DwyerOmega 2024-09-10 | To learn more or order the 3-Way NPT Brass Ball Valves please visit dwyer-inst.com/en/products/valves/valves/ball/automated/serieswe08.htmlDwyer’s customizable and reliable WE08 and WE35 can be utilized to control gas or liquid flow in applications such as: oil and gas, chemical processing, and irrigation. The Series WE08 and WE35 are both full port ball valves, which are designed for great flow rates with minimal pressure drop. Sizes are available from 1/2" to 2” with female NPT end connections. The valves feature a blowout proof stem for added safety, reinforced PTFE seats and seals for a longer life, and a brass ball for better performance.
Weatherproof Digital Temperature Switch | Series TSW DwyerOmega 2024-09-10 | To learn more or order the Series TSW Weatherproof Digital Temperature Switch please visit http://www.dwyer-inst.com/Product/Temperature/Switches/DigitalPanelMount/SeriesTSWThe Series TSW Digital Temperature Switch combines the trusted, reliable TS family of temperature controls and an installation friendly weatherproof enclosure. By using the same programming parameters as our Series TS2 and Series TSS2, set up can be quickly completed using the front keypad or by using the TS2-K configuration key. In order to prevent tampering from unauthorized users, a parameter lock physical jumper and software passcode security are standard in the unit. The bright, easy-to-read LED display shows the current output status and the temperature measurement. The multiple conduit knockouts on the Series TSW give flexibility to the installer to determine the best location for the conduit entry. Another installation friendly feature of the Series TSW is the ability to quickly jumper the line voltage to the common of the output relay using fast tabs. In order to reduce time in selecting models, the Series TSW has universal high and low power supply models and field selectable engineering units.
Explosion-Proof Differential Pressure Transmitter | Series 3100MP DwyerOmega 2024-09-09 | The Mercoid® Series 3100MP Multiplanar Smart Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and programmable using HART® Communication. The multiplanar design simplifies installation, saving operator time and money during set up.To learn more or order, please visit dwyer-inst.com/en/products/pressure/differential-pressure/transmitters/series-3100mp-explosion-proof-multiplanar-differential-pressure-transmitter.html
Data Centers, AI, And The Coming Surge: How Sensing Technology Will Play a Key Role DwyerOmega 2024-09-04 | The growing use of AI is already causing demand placed on data centers to surge exponentially, leading to a significant increase in power consumption and heat generation as well. At DwyerOmega, we provide sensors, transmitters, controllers, and data acquisition systems suited to the demands found in todays data centers. Visit our Data Centers Landing Page to find out more: info.dwyer-inst.com/data-centers-trust-dwyer#shorts
How to Re-Range a Series 3100D, 3100MP, or 3200G Pressure Transmitter DwyerOmega 2024-08-29 | Question: How do I Re-Range a Dwyer Series 3100D, 3100MP, or 3200G Pressure Tranmitter?Answer: To start off, we’ll need to remove the top cover to access the zero and span buttons. Loosen the right screw of the nameplate and slide the nameplate away to reveal the buttons.To begin we need to access the menu. Press and hold the ZERO and SPAN buttons simultaneously until MENU appears. Once the buttons are released 1 TRIM will be displayed, which is the first of three submenus. To cycle through the submenus, simply press the ZERO button. Please note that you may need to press the button for up to 2 seconds or until the display changes. The following menus will be 2 SETUP and 3 LCD. For this demonstration, we will only be using the SETUP menu. Once you are on SETUP, press the SPAN button to enter the SETUP menu. 21 UNIT will be displayed and this is where you can change the engineering units if needed. We are going to leave this at the default, which is inches of water column. Move to the next parameter by pressing the ZERO button, where 22 U-RNG will display. This stands for upper range and will represent the 20 mA signal. From here, press the SPAN button and SEL INC will display. This stands for Select Increment, which will allow us to change the values based on a multiplier instead of one unit at a time if you choose. To cycle through, press the ZERO button and then press the SPAN button to select the desired increment. After the increment is selected you will see the upper range, in this case 30, and value. We can increase the value with the ZERO button and decrease the value with the SPAN button. Once the desired upper range or span value is displayed, press the ZERO and SPAN buttons simultaneously to back out to the select increment menu. By pressing the ZERO and SPAN buttons a second time, you will save the upper range, done will be displayed, and you will be redirected to the main screen.To set the lower range we will use the same steps. Press and hold the ZERO and SPAN buttons until MENU is displayed. Once the buttons are released 1 TRIM will be displayed. Press the ZERO button to go to SETUP. Press the SPAN button to enter the SETUP menu but this time we are going to press the ZERO button until we get to 23 L-RNG which stands for lower range and will represent the 4 mA signal. We will then press the SPAN to access the SELECT INCREMENTS menu. Once the increment is selected we will set the lower range we would like. Please note you cannot exceed the calibrated span which is this case is 30” w.c. Once the desired lower value is selected press the ZERO and SPAN to back out to the SELECT INCREMENTS menu, then press them both a second time to save. Once done is displayed and the unit returns to the main menu your pressure transmitter will be re-ranged and ready to use.To learn about the Series 3100D, 3100MP, or 3200G Pressure Transmitters, please visit our website dwyer-inst.com/en/products/pressure/single-pressure/transmitters/series3200g.html
Explosion-Proof Pressure Transmitter | Series 3200G DwyerOmega 2024-08-29 | The Mercoid® Series 3200G Smart Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and programmable using HART® Communication.To learn more or order, please visit dwyer-inst.com/Product/Pressure/SinglePressure/Transmitters/Series3200G
2-Piece Flanged Stainless Steel V-Ball Valve | Series WE07 DwyerOmega 2024-08-28 | To learn more or order the 2-Piece Flanged Stainless Steel V-Ball Valve please visit http://www.dwyer-inst.com/Product/Valves/Valves/Ball/Automated/SeriesWE07The Series WE07 incorporates a V-port ball valve for impressive flow rates with minimal pressure drop. Quarter turn control ball valves are compact, lighter weight and much less expensive than comparable sized globe valves and segmented control valves. They also offer bubble tight shut off with zero leakage and can withstand high pressure drops. The 60° and 90° balls offer an equal percentage flow characteristic. W. E. Anderson’s V-port ball valves have been designed to offer maximum flow characteristics that are substantially higher than comparably sized globe valves. The natural flow pattern of ball valves increases flow rates and in many applications valves smaller than pipeline size can be used.
How to Set Up the Series Mark II Molded Plastic Manometer DwyerOmega 2024-08-28 | The Molded Plastic Manometer, Series Mark II, is quick and simple to use. In this video, we show how to set up the Mark II straight out of the box.Series MARK II Molded Manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for air velocity and air filter gage applications.To learn more or order, please visit: www.dwyer-inst.com/Product/Pressure/Manometers/Stationary/SeriesMarkII
Mark Series Position Indicator/Switch/Transmitter DwyerOmega 2024-08-27 | To learn more about the Series Mark Position Indicator/Switch/Transmitter please visit http://www.dwyer-inst.com/Product/Valves/PositionIndicators-Switches-Transmitters/SeriesMark?Query=mark#videos Standard models in the Mark Series have visual position indicators and are weatherproof, explosion-proof, and submersible. A large variety of outputs are available to fit specific applications. There is a choice of 1 to 6 switch outputs of 14 varieties including inductive sensors, high temperature switches, gold contact switches, hermetically sealed switches, and high current switches.
Series Mark Position Indicator/Switch/Transmitter DwyerOmega 2024-08-27 | To learn more about the Series Mark Position Indicator/Switch/Transmitter please visit http://www.dwyer-inst.com/Product/Valves/PositionIndicators-Switches-Transmitters/SeriesMark?Query=mark#videos Standard models in the Mark Series have visual position indicators and are weatherproof, explosion-proof, and submersible. A large variety of outputs are available to fit specific applications. There is a choice of 1 to 6 switch outputs of 14 varieties including inductive sensors, high temperature switches, gold contact switches, hermetically sealed switches, and high current switches.
Butterfly Valve | Series WE20 DwyerOmega 2024-08-26 | To learn more or order the Butterfly Valves please visit http://www.dwyer-inst.com/Product/Valves/Valves/Butterfly/Automated/SeriesWE20The Series WE20 is offered in lug or wafer body styles and is equipped with a PTFE or EPDM liner. The most critical aspect of the Series WE20 Butterfly Valves is the cartridge seat design, which alleviates installation problems associated with common "dove tail design" seats. Valve torques are lower and more consistent as the seat dynamics are not dependent on being coupled between two flanges. Precision machining of the disc and body allow the cartridge design to maintain a tighter disc to seat tolerance, providing a perfect low torque seal each and every time the valve is cycled. The seat to disc seal is independent of flange support and capable of full rated dead end service. Actuators are directly mounted creating a compact assembly for tight spaces. Limit switches are able to be mounted directly to the valves allowing for remote position indication. The Series WE20 can be configured with either an electric or pneumatic actuator. Electric actuators are available in weatherproof or explosion-proof, a variety of supply voltages and two-position or modulating control. Two-position actuators use the supply voltage to drive the valve open or closed, while the modulating actuator accepts a 4-20 mA input for valve positioning. Actuators feature thermal overload protection and permanently lubricated gear train. The pneumatic double acting actuator uses an air supply to drive the valve open and closed. The actuator has two supply ports, with one driving the valve open and the other driving the valve closed. Spring return pneumatic actuators use the air supply to open the valve, and internally loaded springs return the valve to the closed position.
Low Range Differential Pressure Transmitter | Series 616KD-LR DwyerOmega 2024-08-26 | To learn more or order the Low Range Differential Pressure Transmitter please visit http://www.dwyer-inst.com/Product/Pressure/DifferentialPressure/Transmitters/Series616KD-LRThe Series 616KD-LR Differential Pressure Transmitter is designed for simplicity, making it the ideal choice for installers and maintenance professionals. These low range instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary.
Theres No Time for Downtime | Insertion Electromagnetic Flow Transmitter (Teaser Video) DwyerOmega 2024-08-26 | The Series IEF Insertion Electromagnetic Flow Transmitter is an adjustable insertion flowmeter featuring electromagnetic technology that accurately and reliably measures fluid velocity in addition to providing several continuous signal outputs. This series is specifically designed to offer superior performance paired with simple installation and use.The IEF is used in applications such as: Boiler feed water, Chilled water, Open and closed loop condenser water, Irrigation system, Process and coolant flow, Ground water remediation, Chemical processing, Pump protection, Wastewater and, MiningFor more information and specifications on the Insertion Electromagnetic Flow Transmitter please visit http://www.dwyer-inst.com/Product/Flow/FlowTransmitters/Electromagnetic-AdjustableInsertion/SeriesIEF?Query=ief#ordering
Installation of the Insertion Electromagnetic Flow Transmitter | Series IEF DwyerOmega 2024-08-23 | The Series IEF Insertion Electromagnetic Flow Transmitter is an adjustable insertion flowmeter featuring electromagnetic technology that accurately and reliably measures fluid velocity in addition to providing several continuous signal outputs. This series is specifically designed to offer superior performance paired with simple installation and use.The IEF is used in applications such as: Boiler feed water, Chilled water, Open and closed loop condenser water, Irrigation system, Process and coolant flow, Ground water remediation, Chemical processing, Pump protection, Wastewater and, MiningFor more information and specifications on the Insertion Electromagnetic Flow Transmitter please visit http://www.dwyer-inst.com/Product/Flow/FlowTransmitters/Electromagnetic-AdjustableInsertion/SeriesIEF?Query=ief#ordering
Weather Resistant Surface Temperature Sensor | Series TE-SNW DwyerOmega 2024-08-23 | The Series TE-SNW Surface Temperature Sensors non-intrusively measures the process temperature in hot and cold water loops in buildings. An adjustable metal strap can tightly fit around 2 through 6" pipe sizes, allowing the surface area of the copper plate on the sensor to make good contact with the pipe surface. In order to work with most common building controllers, the output of the sensor can be chosen from 6 different RTD and Thermistor curves. Additional features include a quarter turn twist off cap that is chained to the housing to prevent it from getting lost, and multiple knockout locations and sizes to reduce installation time.To learn more or order, please visit http://www.dwyer-inst.com/Product/Temperature/Sensors/SeriesTE-SNW
Series 477AV Handheld Digital Manometer DwyerOmega 2024-08-23 | To learn more about the Series 477AV Handheld Digital Manometer, please visit dwyer-inst.com/en/products/test-equipment/manometer/portable/series-477av.htmlThe Series 477AV Handheld Digital Manometer is now available with pressure, flow, and velocity measurements along with a number of other convenient features. The built-in air velocity and flow calculations provide accuracy and conserve time and error associated with manual calculations.
How to Set Up a 477AV for Air Flow Measurement DwyerOmega 2024-08-23 | The Series 477AV Handheld Digital Manometer provides pressure, flow, and velocity measurements, along with a number of other convenient features. In this video, we show you how to program the 477AV into flow mode to read out in CFM, and then take readings using a Series 167 Pocket Size Pitot Tube and a Model 160G Averaging Air Flow Grid.To learn more or order, please visit dwyer-inst.com/Product/TestEquipment/Manometer/Portable/Series477AV
