honeywell ZX series subminiature micro snap switch Alex Kenis 2026-09-20 | honeywell ZX series subminiature micro snap switch
Been REEEALLY busy: so lets just talk about my old Ender Alex Kenis 2021-11-22 | Had a busy few weeks... Soooooo here's a suuuuper lo-fi vid showing the Frankensteined Ender in it's current state.
Vlog 05: A pillar of the DIY music electronics shutting down?! Alex Kenis 2021-10-10 | Random vlog about a small DIY music electronics parts distributer and some musings about 'the scene' over the years.Small bear electronics links:smallbear-electronics.mybigcommerce.comtwitter.com/SmallBearElec
vlog 04: clearing debris, makeshift workspace, flooring experiments Alex Kenis 2021-09-27 | Re-upload/edit of the vlog post from last weekend: the next episode of the worst home improvement series on the internet!
VLOG 3: August update, still working, slow but steady Alex Kenis 2021-08-23 | Just catching yallz up on the house progress
VLOG 2 - basement workshop thoughts Alex Kenis 2021-05-31 | Finally in the new place... WHEW. Now the hard stuff begins.My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrGermany https://www.amazon.de/?tag=alexkenison0c-21Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Vlog 01 - What Ive been up to, what Ill be doing Alex Kenis 2021-04-25 | Just a heads up about what's been happening...My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrGermany https://www.amazon.de/?tag=alexkenison0c-21Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Q&A late 2020 Alex Kenis 2021-02-05 | Q & A late 2020 mostly covering Kingroon vids. I could not access questions older than a few weeks for some reason, sorry about that.Time Index:00:00 intro06:00 Ender PSU grounding09:22 getting screwed on aliexpress... again11:40 kingroon/makerbase firmware errors12:58 surprising controversy when reviewing basics15:40 razer optical switch mouse problems18:40 new gaming mouse to torture21:30 bang bang bed issues confirmed25:40 ender bent bed issues28:20 mouse switch replacement tips g50231:00 kingroon final vid mail holdup33:30 will I do box frame printer vids35:10 cheap linear rail binding37:20 BFTB vs kingroon better prints?40:35 janky water-cooling: CLC?42:40 small sample size reality distortion45:10 why not replace KP3s base with extrusions47:10 Y axis belt mount KP3sMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrGermany https://www.amazon.de/?tag=alexkenison0c-21Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
kingroon KP3s 3(A): fundamentals, firmware, and fixes Alex Kenis 2020-12-05 | 00:00 Start01:46 Background03:12 Why keep covering cheapo stuff??06:55 Squaring axes11:25 Testing12:30 DIY slicer profile for Cura14:50 pre-installed firmware15:52 Kingroon FB group firmware18:11 MKS robin nano18:32 roll your own firmware20:07 what I used for this vid21:00 print resume revisited23:58 USB24:53 outro and previewMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrGermany https://www.amazon.de/?tag=alexkenison0c-21Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Kingroon KP3s part 3: further evaluation and tougher print testing Alex Kenis 2020-11-19 | Part THREE of our Kingroon KP3s adventures. This time we'll cover the extruder, print tests, some more hardware issues, and some software settings, as well as setting the stage for some mods and tweaks.00:00 intro00:57 methodology04:15 spool holder test FAILED06:02 lattice test FAILED06:02 dimensional testing and accuracy vs precision explained07:56 precision vs accuracy10:00 dimensional testing13:00 firmware questions14:12 gcode flavor tests15:03 TANGENT: mesh doctoring16:30 obligatory benchy17:50 ripple and bulging21:10 magic numbers22:03 print resume24:17 misc annoyances24:35 USB connectivity problems26:05 bang bang bed heating26:38 summary28:55 future work / next video teaserMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrGermany https://www.amazon.de/?tag=alexkenison0c-21Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
kingroon KP3s Part 2: evaluating claims and initial print problems Alex Kenis 2020-11-15 | Part 2 of the Kingroon kp3s. This time we will be evaluating some the main selling points, as well as debugging the horrific initial prints...TIME INDEX:00:00 Intro00:19 Background02:14 Bed and magnet info04:31 Bed leveling05:26 SD card sample print problems06:07 Layer shift evaluation08:10 Z-axis evaluation10:15 parts cooling impression14:15 surface quality15:44 those pesky linear rail cart issues18:20 TPU NINJAflex print19:05 first filament jamMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
For fun: Part 1 - Kingroon KP3 3d printer unbox and hardware evaluation Alex Kenis 2020-10-15 | I promised a fun 3d printing vid... so here it is. I ordered this printer a while back without ANY prior knowledge of it's relative suckitude, so let's check it out together.0:00 intro2:15 background3:32 specs4:53 unboxing7:00 hardware evaluation8:40 electronics10:00 wiring safety12:06 assembly13:23 wheel problems13:56 z-axis17:18 crunchy linear rail17:41 other issues19:35 extruder26:47 Problems TL;DR30:34 outroPRINTER: amzn.to/2STseyeHex Wrenches: amzn.to/34RaoShCrimps and tool: amzn.to/34Y7E5HSilicone sock: amzn.to/3j2rCBi (size looks OK but not verified)Block Cotton + tape with free heat block: amzn.to/314GHMq40mm long sleeved heatbrake replacements: amzn.to/30YyHwrMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20Germany https://www.amazon.de/?tag=alexkenison0c-21Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Vintage amp and turntable refurbish Alex Kenis 2020-09-10 | I know videos have been sparse lately, but I got a few spare hours to put out this quickie. Hope it's fun.00:00 Intro01:51 basics05:19 turntable08:02 electronics08:56 contact cleaning11:40 cheap gear12:36 preparations15:50 amp17:50 schematic walk-through24:00 outroProduct links:Soldering/desoldering kit amzn.to/33bOSGXSoldering iron tips amzn.to/2GGStFjsolder wick amzn.to/3bEQtJfDeoxit D5 + D6 bundle amzn.to/2GAkQVBMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20Germany https://www.amazon.de/?tag=alexkenison0c-21Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Lockdown Ender mod experiments Alex Kenis 2020-08-15 | This is a catalog of the weird and wacky mods and experiments I inflicted on my Ender over the lockdown period here in Philly. Some were good, some were great, some were just... "interesting". Let me know in the comments what you want to learn more about.0:00 Intro0:55 background info4:00 spool holder & CAD4:57 Quick release connectors6:12 Vibration damping7:29 active power monitoring8:06 belt tensioners8:57 realtime belt monitoring9:30 Pulleys & belts10:07 print server/control13:07 wifi upload & ESP3213:50 lapped bed14:25 carbon fiber Y-sled14:41 3-point leveling, insulation, silicone springs15:03 X-axis carts and linear rail16:08 alternative print surfaces17:17 passive cooled electronics17:45 BIQU SKR E3-DIP & tmc2209 UART19:30 fried board troubleshooting19:50 sensorless 9-point mesh bed leveling23:09 test jigs25:03 oscilloscopes26:22 sensors for thermal testing26:45 audio nerdery27:36 hotends29:02 materials vs geometry30:13 dual feeder extruder on the cheap30:30 watercooling31:14 Nozzle dimensions31:56 cooling fans34:51 CFD35:50 offline cooling36:40 outroMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINKS:USA amazon.com/?tag=alexkenisonli-20Germany https://www.amazon.de/?tag=alexkenison0c-21Intro and background music by my metal band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Q & A summer 2020 Alex Kenis 2020-08-05 | 00:00 Start02:05 Q&A intro03:19 Ender Z-wobble ball bearing04:40 mouse planned obsolescence06:05 Cheapo linear rail08:29 Omron switch numbers and on/off switching11:50 stepper motor shaft sleeve mod16:02 Ender alignment hole17:42 SKE stm32 checking for extended memory quality19:00 mouse switch dimensions19:58 32 bit board revisit?24:00 Tusk air cooling; cpap27:25 tmc2130 layer shift 28:55 SKR DIP video?30:15 SKR mini bootloader33:45 PLA alcohol annealing research papers35:30 youtube translation woes36:10 Ramps + GrandCentral pcb38:20 1/4 stepping + interpolation39:10 water cooling stuff40:25 mouse switch parts number41:40 retraction with Cap tubing and couplings42:35 IPA vs Ethanol43:01 stepper sine cosine driving44:01 overclocking STM3245:30 eccentric nut details46:20 mouse polling rate and switch ratings48:38 outro My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20Germany https://www.amazon.de/?tag=alexkenison0c-21Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Improving printed PLA parts... WITH BOOZE? Alex Kenis 2020-06-22 | Some testing I did to investigate ethanol as a possible catalyst for increasing PLA crystalinity by printing a part, then soaking it in booze... should be funPRODUCT LINKS:polymaker polysher amzn.to/2YYUemZnatural PLA amzn.to/2V4kSK2ultrasonic mister amzn.to/3hPO0y3bang for buck calipers amzn.to/3dmWYPUlab denatured ethanol amzn.to/2V6H85I 00:00 start1:55 intro3:27 background info5:38 what alcohol and why9:55 testing setup12:18 testing preface13:06 test #113:18 test #214:50 test $316:32 test #416:13 test #517:28 test #619:38 bonus test 22:20 dimensional measurements22:26 conclusions22:10 further testing25:15 takeawaysMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.com
Story time: broken bones and wasted days Alex Kenis 2020-05-18 | And here i thought i was going to spend this downtime making fun videos for you all... WARNING: video contains xray images and skinned knees. My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Custom guitar amp part 2 of 2 Alex Kenis 2020-03-31 | This vid is just a bit about the electronics and wiring. I kept it simple, but added some rambling details at the end after the outro for anyone who may be interested.My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Adding my $0.02 to the SD card + Rpi speed test data from explaining computers Alex Kenis 2020-03-24 | This is my addition to the "Explaining computers" vid here youtube.com/watch?v=YUResed38uo My test were run on a pi zero W v1.1 board with octoprint installed from the provided image, flashed via etcher, and the IO test tools added afterwardSorry that this is rather incomplete, but it was just a small part of a much larger planned vid, BUUUT it hot wiped out, so here is this info for now, and hopefully I can get to the other stuff at a later date. Remember that the tier list at the end applies to this specific use, NOT every possible use case.link to tests used: pidramble.com/wiki/benchmarks/microsd-cardsAffiliate links to some of the better cards:Lexar 633x amzn.to/2J99AxJSamsung Pro Endurance amzn.to/33RpGpjSandisk Extreme Pro amzn.to/2WAqP2NMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Custom Guitar amp: Part 1 of 2 - Up-cycling and elbow grease Alex Kenis 2020-03-23 | I recorded much of the process of designing and building an amp last summer, so here is a short overview series for your amusement. This first part covers the look, materials, and planning.TIME INDEX:0:39 intro2:50 Planning and specs5:35 Faceplate: try #18:04 Front panel12:45 Faceplate: try #214:35 labels and assemblyMy contribution links: Budget tools links:Budget stepped-bit set: amzn.to/33JYmJwBudget drill bits: amzn.to/2xfFE0abudget straight tin snips: amzn.to/2y0NpY1budget compound snips: amzn.to/2wxHmtx18 pt letters: amzn.to/2WyvodYMaterials used:liver of sulphur: amzn.to/3abZsA8VHB tape: amzn.to/3ad1YpzContact cement: 16oz amzn.to/33DZmP4Contact cement: small amzn.to/2WAQgB8Locktite super glue gel: amzn.to/3dqj3P5Classic Titebond 2 PVA glue: amzn.to/2UbCHXiShellac spray: amzn.to/2y4f7Dlquick epoxy: amzn.to/2JdlUg4speedball india ink: amzn.to/2QG6g15MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
wat imma be doin during all this... Alex Kenis 2020-03-20 | Yes, I'm still here; no Philly has not burned down yet: Lots of things up in the air, but here's the short-term plan.My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
FEB 2020 Q&A, tubing update, how-to Alex Kenis 2020-02-29 | Q&A and update on bowden tubing stuffz. Oh, and if any of you try the hydro couplings (again... it's just an experiment, so use at your own risk) let me know if it works out well, or if you have any strangeness/problems/slop/etc over time, and I'll give updates on mineLinks to the experimental parts used (not affiliate):Hydro Compression fittings: 4mm M6x1 aliexpress.com/item/32830602568.htmlBarb 4x2.5mm : aliexpress.com/item/32923365848.htmlBlack tubing 1.9mm I.D. : aliexpress.com/item/32354926214.htmlTIME INDEX:0:17 intro7:18 Q's about couplings and links8:25 wish for exrtuder feedback loop12:47 extruder aglet13:08 black tubing link13:27 coupling quality17:01 stifening bowden tube19:37 tube length?21:37 non-Nowtonian behavior23:23 comparison Cap tubing with and without24:05 remote direct24:58 bike cable casing26:42 theu couplings29:26 installing tubing in hotend30:05 outro30:50 links to parts32:00 clips from vids sent34:10 hydro couplings how-toMONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Fancy Bowden couplings and fake tubing tests Alex Kenis 2020-02-19 | UNFORTUNATELY, I forgot that this weekend was Mardi Gras celebration down here, so it was too loud to record... so this one is a bit rushed and unpolished (I haven't even dug out my intro clip and text backdrop yet) BUT a promise is a promise. I started out just documenting experiments with couplings, and ended up wandering into unexpected areas.0:05 intro and background3:30 hardware setup4:20 causes of bowden slop5:32 what are bowden couplings7:35 hydraulic couplings and setup10:20 BAD TUBING14:10 comparison with real tubing16:10 Testing setup for bowden stretch17:24 stretch test results19:05 pics of different tubing used19:45 print tests with different tubing23:35 NERD STUFF: bowden flex examined25:22 tension and hysteresis27:15 hysteresis testingMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRF
Sorry about the delay: ID theft, and explodoing transformers, and data loss... OH MY Alex Kenis 2020-02-13 | SOOOORRY about the delay... I seem to be a trouble magnet these days. Hopefully this explains whats up without going into too many personal details (I also cut out a bunch of complaining and a few rants, so that's something).My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkeniso03c-21Germany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Worlds jankiest DIY watercooled hotend (but it works!) Alex Kenis 2020-01-03 | This is a bit of a fun behind the scenes look at a suuuper junky watercooler I put together with hardware store parts, for the ender 3 hot end. I'll build a proper one soon, but I thought you should share in my amusement, and to get a better idea of the BARE MINIMUM. the pump I am using is AD010-1208D, which cost me like $3 or so, but I'll list a better pump below (it is a bit noisier at higher voltages, but still pretty quiet if you suspend it in the water tank rather than mounting it to the side where it can vibrate). I'll do more detailed testing for WHATEVER the final result becomes (IR thermal pics, thermistor down the heatbrake, etc).TIME INDEX:0:10 Intro2:35 Background7:45 water-cooling basics8:53 cooling block design11:14 tube bending14:55 connecting the tubing16:34 res and cooler17:34 pump19:24 noise comparisonMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkeniso03c-21Germany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)24v water pump amzn.to/2SQYzqHcopper anode amzn.to/37C5bO1
Why cooling fans are so hard, and some preliminary testing Alex Kenis 2019-12-29 | This is just a little insight into why cooling fans are more complicated than they would appear... plus some initial testing I did in preparation for an eventual cooling fan comparison video.(Sorry about the plosive popping into the microphone... my sick wife was sleeping so I was aaaaaall kindsa up on the mic, trying not to be too loud)My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkeniso03c-21Germany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)(Images were sourced by reuse rights image search and are the property of their respective owners. Other images appear under fair use policy)
Stepstick jumpers: basic concepts for n00bs Alex Kenis 2019-12-01 | I was short on time this week, so I put together a video on the basic concepts surrounding those pesky stepstick microstepping jumpers for noobies and anyone that is unfamiliar with concepts like logic voltage, pull-ups, etc. I cover the fundamentals using the RAMPS board and allegro Pololu drivers as reference, but also touch on Trinamic concepts, etc. Time index is below:If you are planning to do any black friday or cyber monday shopping, please consider using my affiliate links:AFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20UK amazon.co.uk/?tag=alexkeniso03c-21Germany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20TIME INDEX:1:05 what are jumpers2:28 step stick history and basics4:40 jumper logic voltage concepts12:20 tangent: RAMPS pulldown resistor13:13 Trinamic and other drivers19:35 jumper 3 & Trinamic24:35 clones and jumper confusion26:01 on-board resistor jumpersMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Follow-up : SKR e3 mini v1_2, testing the extra memory Alex Kenis 2019-11-16 | This was the most definitive testing I could think of, BUT if anyone thinks of any other method I should be using, let me know. No time index, but the flow is: intro and setup, testing, speculationLink to Amazon USA E3 v1.2 board amzn.to/2QpO4cQMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkeniso03c-21Germany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Pocket 100MHZ?? oscilloscope part3: testing and conclusions Alex Kenis 2019-11-16 | Teardown, evaluation, theory, and speculation about an odd little portable '100MHz', single channel oscilloscope. I saw it and had to grab one to peak under the hood. Spoiler alert: there is some strange stuff going on... I broke the vid up into 3 since it was stupidly long, but I wanted to shoehorn some theory in there, and add some speculation. Here is DAAAAAAAAVE's vid about the same scope youtu.be/SIH48bIUU00And if you end up being interested after watching all 3 vids...FNIRSI 5012h Oscilloscope amzn.to/2XfwWI5My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Pocket 100MHZ?? oscilloscope part2 - theory and speculation Alex Kenis 2019-11-16 | Teardown, evaluation, theory, and speculation about an odd little portable '100MHz', single channel oscilloscope. I saw it and had to grab one to peak under the hood. Spoiler alert: there is some strange stuff going on... I broke the vid up into 3 since it was stupidly long, but I wanted to shoehorn some theory in there, and add some speculation.Here is DAAAAAAAAVE's vid about the same scope youtu.be/SIH48bIUU00And if you end up being interested after watching all 3 vids...FNIRSI 5012h Oscilloscope amzn.to/2XfwWI5My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Pocket 100MHZ oscilloscope?? part1 - intro and teardown Alex Kenis 2019-11-16 | Teardown, evaluation, theory, and speculation about an odd little portable '100MHz', single channel oscilloscope. I saw it and had to grab one to peak under the hood. Spoiler alert: there is some strange stuff going on... I broke the vid up into 3 since it was stupidly long, but I wanted to shoehorn some theory in there, and add some speculation.Here is DAAAAAAAAVE's vid about the same scope youtu.be/SIH48bIUU00EDIT: cpassuel has pointed out in a comment that some clever people ARE INDEED working on getting this gizmo more workable. They are still in the initial stages, but you can check the progress here: eevblog.com/forum/projects/reverse-engineering-fnirsi-5012h And if you end up being interested after watching all 3 vids...FNIRSI 5012h Oscilloscope amzn.to/2XfwWI5My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Just for fun: Benchy with memory hacked SKR and aaaaalll the features toggled on Alex Kenis 2019-11-13 | This is an addition to the previous video with Skeenerson's Marlin fork and the 512k memory mod. I had toggled on all the crazy features, so I figured I should do up a Benchy since I did it with the other two vids.Ender 3 amazon amzn.to/36Qr0trSKR e3 mini v1.2 board: amzn.to/2CAtYV9My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
LIES! the SKR e3 mini v1.2 ACTUALLY still has 512k of memory? Alex Kenis 2019-11-12 | Turns out the 'ol bluepill-lying-about-memory thing is going on with the MCU on this board as well, so there is actually 512k. Hopefully that is true on all boards, but I confirmed it on mine.steenerson's fork is here: github.com/steenerson/Marlin_SKR_E3_Mini_12_512K There is also a branch with BLtouch enabled in the pulldown menuHis post: old.reddit.com/r/ender3/comments/dsmf6x/512k_flash_working_on_skr_mini_e3_v12And an amazon USA link to the board if you are looking: amzn.to/2pTWwq1 or you can save a few bucks and get it from overseas :aliexpress.com/item/4000147610181.html?albbt=1&isdl=y&aff_short_key=uNb6i2f&aff_platform=true&albslr=229358573&src=Youtube&tag1=AlexMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Ender3 benchy battle: stock board vs SKR mini V1.2 Alex Kenis 2019-11-11 | Overview of installation of the newly revised SKR mini e3 v1.2... and a 'battle of the benchies' against the stock board, using the 'out of the box' firmware and same gcode for each. Not a 'deep dive' or review, but there is enough info here to be fun and a bit useful. More in-depth reviews and testing are still a few vids away, so hopefully this provides some amusement until then. As of the time of testing, tethered printing was wonky in a few programs, so I would print via SD until then. Pronterface seemed to be functioning normally though.Aliexpress 11.11 sale linksSKR mini E3 sale pricing ： aliexpress.com/item/4000147610181.html?albbt=1&isdl=y&aff_short_key=uNb6i2f&aff_platform=true&albslr=229358573&src=Youtube&tag1=AlexTMC2209 stepsticks sale pricing aliexpress.com/item/33028054557.html?albbt=1&isdl=y&aff_short_key=uNb6i2f&aff_platform=true&albslr=229358573&src=Youtube&tag1=TMC2209Amazon links:JST connector kit amzn.to/36R2XKXCrimp tool amzn.to/2KaCu14Wire ferrule tip and crimp kit amzn.to/2K8E5o5Ender 3 amazon amzn.to/36Qr0trEnder 3 11.11 sale aliexpress.com/item/32903432578.htmlMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Ender 3 alignment: problems and solutions Alex Kenis 2019-11-08 | Walkthrough of the various issues with adjusting the Creality3D Ender 3 printer. This vid includes several different methods, each with an explanation and step by step walkthrough. Not a definitive guide, but rather an overview with details on the problems and alternative solutionsThe popular guide and method that I refer to was written by OneBadMarine aka Luke Hatfield, and 'Edge of Tech' channel walks through that procedure from it step by step. There is a link to that PDF under those videos. youtube.com/channel/UC1Ak7Ir1WMOWauY_oH00-QgSTL and CAD models will be posted on my thingiverse page when they are approved by the site: thingiverse.com/AletheianAlexTIME INDEX0:12 intro and announcements3:18 initial info and problems4:27 Z extrusion alignment info5:22 step by step6:14 Z leadscrew alignment info11:50 the quick and crappy method12:40 more accurate method15:15 STEP BY STEP16:35 motor mount misalignment17:08 poorly stamped bracket problem17:32 X gantry leveling info20:14 STEP BY STEP, METHOD 1: tool-less21:08 problems with this method22:34 My personal method23:38 alternative method with t-nuts24:08 the 'other popular method'24:24 STEP BY STEP: My personal method: leveling from bottom26:05 Preferred personal method: leveling from top /w gaugeMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFPARTS LINKS (USA AMAZON... for out of us, please use the general affiliate links above):Official Reality Ender3 amzn.to/36OcLp6Official Creality Ender3 pro amzn.to/2oZJAhEDepth gauge amzn.to/2CtiqmlCaliper /w depth gauge (you should own calipers...) amzn.to/2qAgqGiBudget dial indicator with base amzn.to/36NTggc3/8" Budget drill (on sale) amzn.to/36IjJM9Background music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
What is 3d printing: a guide for the curious (by request) Alex Kenis 2019-11-07 | This is a quick guide for folks who are interested in 3d printing, but don't know what it is or where to start. I tried reeeealy hard to speak slowly and clearly in this one... which is not easy for me. Desktop 3D printing is making its way into a lot of hobbies and interests, but the more the industry progresses, the harder it is to know where to start.Time index:0:38 What is 3D printing2:35 Where do I find 3D models3:40 Workflow & how to8:00 printing services8:50 Which printer and how much will it cost13:15 Which CAD to use15:10 What would I do with a printer?My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINKS:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrENder3Pro printer (US Amazon) amzn.to/2CmR5lLUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
TNTM: Easy STM32 Overclocking in Arduino Alex Kenis 2019-11-01 | Time for a 'talk nerdy to me' vid! I know the basics of increasing the clock speed on these chips is well known, but with a convenient function laid out... it is as simple as copy/paste in the Arduino IDE. This is a bit of a continuation and expansion of the previous video... with some information I think is useful, as well as building toward future testing, how-to, and review videos. Hopefully this will be useful. It was to me.TIME INDEX:1:20 review5:08 gear used and details9:32 how to10:30 the dirty details of how the clocking worksMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)2-pack F401 boardsamzn.to/2NrjgFmF303 boardamzn.to/337vdXiST-Link programmer (mine had correct chip)amzn.to/2C3D8ccFreq counteramzn.to/2N6Y1tL50 ohm clip and grabber BNC cablesamzn.to/336fhojSMA to BNC adaptor for freq counteramzn.to/323tm4D
OScopes, coding, and fake MCUs... OH MY Alex Kenis 2019-10-18 | A meandering walk through some pitfalls you can encounter when setting up for testing. This started as a simple project: make a low-MHZ-range square wave generator for a short segment on bandwidth in the upcoming Ender3 power supply video, BUT it ended up opening a huge can of worms AND making me realize that testing for counterfeit MCUs may be necessary for future board reviews. (No time index for this vid since it is cumulative and linear.)My support links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINKS:USB scope used in vid (review and other scope options coming soon)Hantek USB OScope: amzn.to/2oKmHPk(20MHz--not really though, 48MS/s--not really though, 2-channel, DC-coupled only)USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
OOPS... fake BluePill boards, and what to do about it Alex Kenis 2019-10-04 | Stumbled upon a bit of a mess... one of the batches of blue pill boards I got in had non ST MCUs on them (I think CS32F103C8T6?) which would not work with an ST-link, ho here is a warning and a workaround.My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Ender part 1: Hardware and assembly evaluation Alex Kenis 2019-09-28 | First part in the series, WOOO! This vid introduces the whole series and deals with my initial impression of the assembly process and hardware, as well as thoughts on improving the process and printer in general. Feel free to skip around using the time index if you get tired of my rambling. We'll be using the Ender series as both a how-to guide, AND as a springboard for more complex concepts. I know I skipped a few things, but the video got pretty long, so we'll address even more specifics in future vids.(On the business end: this series is ending up costing me more up-front $$ and time than I had anticipated, so I will be enabling overlay ads for the series -- which I don't usually do -- to offset the cost a bit. Sorry if that is annoying. I WON'T be enabling un-skipable ads though, because they annoy me greatly, and I wouldn't do that to you fine folks.) ALSO, for you new folks that may not know, in terms of the comments section, I have basic spam controls enabled, so some comments with links or rapid successive posts get caught in the spam folder, and I have to manually approve them... I do that as quickly as I can, but sometimes it is a day or two for me to get around to it... so don't freak out and think you are blocked. I don't typically block anyone if I can help it, UNLESS the comments are obvious spam/trolling or are vulgar/uncivil/racist/etc.TIME INDEX:0:30 Intro and explanation for new viewers1:50 Background on the series7:50 Ender 3 good points10:17 Ender 3 bad points (on my ender)10:22 checking the safety ground11:20 checking the Bowden couplers13:55 Ender 3 bad points (on all enders)14:06 Quality control rant16:30 Tangent about adjustments and construction17:50 some upcoming vids in the series18:56 other random potential future issues20:43 fan experiment tangent23:37 the XT60 connector24:36 general thoughts for the desktop printer industry31:05 TL;DR summary and closing thoughts37:43 Outro and closing statementsMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)affiliate links:usaamzn.to/2LSHOq4 upgrade PSUamzn.to/31ugGnH Ender printerUKamzn.to/2LVssRH upgrade PSUamzn.to/2QhptZ9 Ender printerDEamzn.to/2MagJ1V upgrade PSUamzn.to/2UZ8bP8 Ender printerCanadaamzn.to/2Oaao95 upgrade PSUamzn.to/2LSKbcs Ender printerGeneral product links:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFOh, random tip: and if you are looking for massive storage, there are some large drives on sale at the moment (I grabbed a few)8TB @ 140 and 10 TB HDD @ $180amzn.to/2mCHqU0
Livestream: Edited version of the ender3 build and dialogue Alex Kenis 2019-09-18 | Here is an edited version of the Ender3 livestream with a little intro commentary (for those who would rather just watch the fun bits and not 3-1/2 hours of me dropping allen wrenches and looking for lost parts). I know that some folks like to watch for the interaction with chat and the build commentary, so here ya go.This series is not endorsed by Creality 3D, nor did they supply the printer, and no money has changed hands, etc etc blah blah blah..:: LINKS AND UPGRADE POWER SUPPLY ::.There are other legit PSU manufacturers, but Mean Well are pretty much globally available, and have the LRS line, which are solid for the money. It will do 14.6 Amps at 24v, so if you are planning high wattage upgrades, consider a higher wattage model like the SE-450-24, which will do about 19 Amps.usamean well 24v 14.6A amzn.to/2LSHOq4ender 3 pro amzn.to/31ugGnHUKamzn.to/2LVssRH PSUamzn.to/2QhptZ9 printerDEamzn.to/2MagJ1V PSUamzn.to/2UZ8bP8 printerCanadaamzn.to/2Oaao95 PSUamzn.to/2LSKbcs printerGeneral product links:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFMy contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Creality Ender (and others!) safety issue - chassis ground connection Alex Kenis 2019-09-16 | The safety ground is a circuit that ties a conductive chassis to earth in case the chassis becomes electrified, thus protecting the user. If you want to see if this issue effects you (ender or other): power off and unplug the power supply, then probe from the safety ground prong on the AC inlet to see if there is continuity (a few ohms or less) to the metal chassis (remember that there is a coating on it, so probe the bolt standoff as shown in the vid, or the inside of a punch-out where there is no coating). My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Ender 3 build, evaluation, and discussion... take 2 Alex Kenis 2019-09-14 | We'll be unboxing, evaluating, discussing and building an Ender 3 printer. This will kick off the ender 3 series with in depth evaluation, mods, etc. I will be putting up an edited TL;DR of the stream with voiceover commentary... so you don't have to watch all 3 and a half hours if you missed it
Behind the scenes: tmc2209 testing preparations... aka why the review isnt finished yet Alex Kenis 2019-09-13 | Here is a behind the scenes look at the prep work that goes into a detailed review video... and an object lesson: I didn't manage to get it finished this week as I had hoped, but I did document the process of setting up the testing and the mentality behind it, so here is a sneak peek into that process.The Ender 3 Livestream will be tomorrow, Sat, 3:00pm eastern standard time. Event will be posted (hopefully the event link will work this time, otherwise I will just " go live" and stream on the main channel.)My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Q&A AUG 2019: OS schems, livestreams, upcoming vids Alex Kenis 2019-09-06 | Q and A session for August 2019. As usual, you can use the time index below to skip around. This time we will be covering the release of the schematics for the "new" open source boards, LCD troubleshooting, more mouse switch stuff, the upcoming vids, and moreTIME INDEX:1:12 livestream date4:15 upcoming cheap test gear?6:08 tmc2209 shortage6:48 32-bit klipper8:01 EU support links9:40 basics videos necessary?11:02 more mouse switch12:01 all SKR schematics released12:48 32-bit board USB14:19 bigtreetech tmc2209 flaw14:52 usb driver problems16:13 CE UL certification woes17:05 viewer's open source rant19:01 microswitch options for finicky mice20:45 grand central M4 troubleshooting26:50 separate mcc LCD driver29:54 RRD FGLCD OLED upgrade?32:35 ender 3 with volcano36:35 threaded rod still an option?My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)~~~Ender 3 official amazon affiliate link amzn.to/2Q1osVc
TNTM: STM32 Blue pill with st7920 display (RRD FGLCD) Alex Kenis 2019-08-31 | This is a step by step setup guide to give an example of how to get the popular st7920 full graphic LCD panel working with a common 32-bit board (stm32f103 'blue pill') in 3-wire, SPI mode using the u8g2 library and arduino IDE. This was in response to some troubleshooting questions on another video, as well as just a general guide .TIME INDEX0:10 - intro and livestream issues1:25 - start4:00 - background4:35 - overview5:13 - dissecting the panel7:15 - electronic explanation8:25 - required software and hardware10:28 - setting up the board and libraries12:25 - the code15:15 - manual STlink uploading from terminal16:08 - hardware connections.::Links to hardware used (Amazon USA)::.ST-link programmer: amzn.to/2MOvEl6Budget soldering kit: amzn.to/2L9r4eZDesoldering braid: amzn.to/2zAtTPI5pcs for $15 blue pills: amzn.to/2NGowqjDupont cables: amzn.to/34gLMB5RRD LCD: amzn.to/2PotlqTMy other contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)@AlexKenis on twitter
Livestream technical difficulties Alex Kenis 2019-08-24 | The livestream ended up being 34 seconds long.... oooh boy. I'm on a 250mb connection, but the stream was getting a bad quality and time out warning on youtube. I'll reschedule when I get to the root of the issue. Sorry about that
Rant: If you say open source... open the source please Alex Kenis 2019-08-22 | It's not just a marketing buzz word. Hopefully this vid can be a resource for companies that are trying to become compliant, and companies that are 'on the fence' about it. Open source is very important to the development and continuation of the desktop 3d printing industry. So much so that it has become a marketing buzz term that is applied without even complying with it. I wanted to provide examples of how much easier open source makes life for the tech-people involved. And to make sure that the term 'open source' does not get diluted to the point that it has little meaning. As I get to various boards in the future, I will make it a point to praise the manufacturers that are making the effort and supporting the community and industry. Thank you to the good guys.(P.S. I do my best to use 'labeled for reuse' or free/open graphics and provide attribution for all the graphics I use for these vids, but some of them were a bit tough to track down, so general URLs are provided as source, as some of them were pulled from actual online discussions to use in real-world examples under fail use)My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenison0c-21Canada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
Ender Livestream announcement, current and upcoming subjects Alex Kenis 2019-08-15 | Announcement vid for the Ender3 build. (Quickie vid with minimal production, oh and please ignore the occasional "name" text that pops up in the corner... those were time index markers that I never filled in). The stream will be basic unboxing and assembly, with a focus on evaluation of parts and construction, as well as community Q&A, and a few test printsAmazon wish list: amazon.com/hz/wishlist/ls/3KH6NAKJP8BJKEnder-3 affiliate links from official Creality amazon storefronts:USAamzn.to/2Z5d3qvCAamzn.to/2H4IoiOUKamzn.to/2KL7YuhDEamzn.to/2yXjDAJ
Etched and oxidized stainless steel logo plate: art meets science Alex Kenis 2019-07-22 | This is a vid of the process behind making a logo plate for a project I am currently working on. This is not a how-to, but rather a glimpse of a process behind one of my current projects. Please take necessary precautions if doing any of this yourself: there are plenty of complete guides and how-tos, with relevant safety information, online. Regardless, hopefully there is enough novelty in here to be educational and amusing.My contribution links:MONTHLY SUBSCRIPTION:patreon.com/AlexKenisONE-TIME CONTRIBUTION:https://PayPal.me/AlexKenisAFFILIATE LINK:USA amazon.com/?tag=alexkenisonli-20amzn.to/2luhMQrUK amazon.co.uk/?tag=alexkenisonli-21amzn.to/2jUoKxTGermany https://www.amazon.de/?tag=alexkenisonde-21amzn.to/2jUxCDECanada amazon.ca/?tag=alexkenisonca-20amzn.to/2luivRFBackground music by my band Solamors, you can contribute by buying a copy on bandcamp.com, or iTunes, Google Play, etc etc:solamors.bandcamp.comaletheian.bandcamp.comPRODUCTS and blog:AlexKenis.com (redirects to my blog at the moment)
