Craft Fair Project Chris Cute 2019-04-25 | Hey! It's been a while. How ya doing? Today I have a simple and very inexpensive craft fair project that you could use for yourself, make as a gift or if you do craft shows, then you could make a really nice profit by selling it. Let's get started.=================================================The materials I used for this project were:2 different size branches from a white oak1/2" poplar dowelMinwax English Chestnut stain for the baseGeneral finishes Early American water based dye/stain for everything else.Garnett Shellac (2lb cut) for the finish.Holes in the middle of each piece are from a 5/8" spade bitHole in the middle of the base that holds the dowel was made by a 1/2" brad point bit==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)Doh De Oh by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100255Artist: http://incompetech.com“Run” by Ethan MeixsellHappy Boy Theme by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100647Artist: http://incompetech.com"In The Land of Rhinoplasty" by Jingle PunksLine Of Fire by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comFor Mimi by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://www.twinmusicom.org"Orange Blanket" by Jingle Punks “Hitting The Streets” by JR Tundra
Air Drying Wood Follow Up Chris Cute 2019-01-17 | One year ago I put out a video on how I go about air drying green wood or freshly cut slabs of wood (the link to that video is below). In that video I showed 2 slabs of freshly cut Black Walnut so, since it's been a year, I thought a follow up showing those same 2 slabs and the results I achieved would be in order.How To Air Dry Wood video: youtube.com/watch?v=MpixFYMpOf4==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellDoh De Oh by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100255Artist: http://incompetech.com “Hitting The Streets” by JR Tundra
Toy Kits - For The Kids #8 Chris Cute 2018-11-15 | This is #8 and most likely the final video in this series of things for the under privileged children in my area this holiday season. If I find the time closer to Christmas, then I will of course make more. For now though, this may be the last but I hopefully it'll be the best. I say "The best" not because I do anything special, but rather because it may start a child down the path to making things for themselves. Cheers to you for watching and please consider helping out a needy child in your area this holiday season. Products used in this videoWooden wheels1 1/2" - amazon.com/Wooden-Wheels-inch-diameter-width/dp/B01CKMPGJK/ref=sr_1_1_sspa?ie=UTF8&qid=1540930038&sr=8-1-spons&keywords=wooden+toy+wheels&psc=1Wooden wheels 2" - amazon.com/hole-Wooden-Toy-Wheel-Bag/dp/B01M1S0RDI/ref=sr_1_1_sspa?ie=UTF8&qid=1540930162&sr=8-1-spons&keywords=2%22+wooden+toy+wheels&psc=1Axels: amazon.com/dp/B01LYWEJJ9/ref=sxbs_sxwds-stvpv2_1?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=6375e697-f226-4dbd-a63a-5ec697811ee1&pd_rd_wg=KkAPo&pf_rd_r=NTR5ZHDC160FNQYCGA0V&pf_rd_s=desktop-sx-bottom-slot&pf_rd_t=301&pd_rd_i=B01LYWEJJ9&pd_rd_w=HTViV&pf_rd_i=2%22+wooden+toy+wheels&pd_rd_r=fdaee4c4-357f-48e4-90b6-8de1bffc0376&ie=UTF8&qid=1540930193&sr=1Real Tool set for children: walmart.com/ip/Create-Learn-18-Piece-Tool-Set-with-Toolbox-5/131049869?athcpid=131049869&athpgid=athenaItemPage&athcgid=null&athznid=PWVAV&athieid=v0&athstid=CS020&athguid=466001f5-46cfa622-973649f49a18a716&athena=trueThe Kids Building Workshop (book): amazon.com/gp/product/1580174884/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"Mysteries" by Dan Lebowitz"Wishful Thinking" by Dan Lebowitz “Hitting The Streets” by JR Tundra
Handheld Tic Tac Toe - For The Kids #7 Chris Cute 2018-11-09 | This is #7 in this series of things I'm making for under privileged children this holiday season. I can't take credit for this idea as it was Jamie Page (link below) who told me to make it. It's simple enough to do and I hope Jamie & the child who receives it will like my version of it. Thanks for watching & please, consider doing something similar for a needy child in your area this holiday season. Cheers! Jamie's YouTube Channel (click that "subscribe" button for him): youtube.com/channel/UCw3hBDXx_L_EoSFqqmEuWJQ==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellDoh De Oh by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100255Artist: http://incompetech.com"Never Better" by Jingle Punks “Hitting The Streets” by JR Tundra
Plywood Chess Board - For The Kids #6 Chris Cute 2018-11-01 | This is #6 in this series of things I'm making for under privileged children for this upcoming holiday season. Today I'll attempt to show you how to make a Chess board out of plywood. I hope you like it and I also hope that you'll consider making or donating something to a needy Child in your area this holiday season. Cheers! Handmade Children's Toys playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"Heartland" by Silent PartnerLine Of Fire by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com “Hitting The Streets” by JR Tundra
Piggy Bank, Panda Bank? Whatever.. - For The Kids #5 Chris Cute 2018-10-25 | This is #5 in this series of things I'm making for under privileged kids for the upcoming holidays. It's a relatively simply one that hopefully some child will appreciate. Today I'll show you how to make a wooden Piggy Bank or Panda Bank or whatever the child wants to call it :). I hope you like it and I also hope that you consider making or donating to a needy Child in your area this holiday season. Cheers! ==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)And Awaken - Stings by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100331Artist: http://incompetech.comChasin' It by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com"Broadway" by Josh Lippi & The Overtimers"March On" by Dan Lebowitz “Hitting The Streets” by JR Tundra
Pre-School Puzzles - For The Kids #4 Chris Cute 2018-10-18 | This is #4 in this series of things I'm making for under privileged children. This is another "Easy For Anyone" to make kind of build and it will give some child a smile who may not otherwise have one this holiday season. Today I'll show you how to make puzzles for Pre-School kids. I hope you like it and please, think about making or donating to a needy Child in your area for this upcoming holiday season. Much love & Cheers To You! Handmade Children's Toys playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"Lazy River Rag" by Dan Lebowitz"Gimme Back My Ya Ya" by Dan Lebowitz “Hitting The Streets” by JR Tundra
Toy Catapult - For the kids #3 Chris Cute 2018-10-12 | This is #3 in this series of things I'm making for under privileged kids for this upcoming holiday season. This was just a fun one to make and it will hopefully give some child a smile. Today I'll show you how to make a Catapult that you'll want to play with too. :) Enjoy and please, think about making or donating to a needy Child in your area this upcoming holiday season. Cheers! Handmade Children's Toys playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"In The Land Of Rhinoplasty" by Jingle Punks"Live Worms" by Josh Lippi & The OvertimersBarroom Ballet - Silent Film Light by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100310Artist: http://incompetech.com"Mint Chocolate 2a" by Vibe MountainHeavy Interlude by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100515Artist: http://incompetech.com “Hitting The Streets” by JR Tundra
Card Holders - For The Kids #2 Chris Cute 2018-10-04 | This is #2 in this series of things I'm making for under privileged kids for the upcoming holiday season. This is the most simple thing ever to do and it will give some child a smile who may not otherwise get a present. Today I'll show you just how simple it is and talk a bit about maybe you getting involved yourself. Cheers! Kids Card Games: amazon.com/gp/product/B00127UYRE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1Handmade Children's Toys playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEUPS. I totally forgot to put my safety glasses on. That's not typically something I would do. Please wear yours at all times. Thanks.==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell “Hitting The Streets” by JR Tundra
Lego Table - For The Kids #1 Chris Cute 2018-09-27 | Here is the first video in this series of toys for under privileged kids I'll be doing for the upcoming holiday season this year. I hope to get at least one project per week made for the kids before Dec. 20th rolls around. Fingers crossed I can do it. I hope you enjoy this one and please, consider making & giving to a needy child in your area this holiday season. Cheers!Children's Toy Playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"A Dusty Road" by Dan Lebowitz"Natural" by Endless Love"Cliffsides" by Dan LebowitzFor Mimi by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://www.twinmusicom.org “Hitting The Streets” by JR Tundra
Lets Make Stuff (or at least talk about it). Chris Cute 2018-09-20 | This is just a heads up regarding what is coming your way. For most of you this is waayyy too early, but I have to get started on these now or they won't be done in time. I hope you understand and I hope you'll like what's headed your way. Cheers!==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellDoh De Oh by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100255Artist: http://incompetech.com “Hitting The Streets” by JR Tundra
Make Your Own - Wipe On Varnish Chris Cute 2018-09-06 | To go along with the other finishes and stains I've shown you how to prepare for yourself (playlist below), I thought I'd add this one to the list as well. Have a look and if it's something you would like to try then I'm betting you'll be happy with the results and you'll save some money by mixing your own as well. HOMEMADE STAINS AND WOOD FINISHES PLAYLIST is here: youtube.com/playlist?list=PLVQ607vevyCShMTscuiPiWozpaLKo9iB0==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell “Hitting The Streets” by JR Tundra
Simple Cheap & Easy: Solutions Chris Cute 2018-08-24 | Need a band clamp? Perhaps you need more than one? No problem. Here's a Simple, Cheap & Easy solution for you to use in your shop. I hope you find it helpful. Cheers!==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell “Hitting The Streets” by JR Tundra
Resin Casting: Two Into Four Chris Cute 2018-07-12 | Is Resin Casting a viable option when trying to use re-use wood shavings in order to eliminate waste and reduce cost? That's the question I had, so I gave it try to find out. Lizard Blanks: lizardblanks.com/product-page/vhmw-plastic-oversized-pen-blank-moldLiquid Diamonds Resin: turnerswarehouse.com/products/liquid-diamonds-epoxy-casting-resin==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellBeach Bum - Happy Rock by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100347Artist: http://incompetech.comAll Good In The Wood by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com “Hitting The Streets” by JR Tundra
Scrap Wood Projects -Yard Dice Chris Cute 2018-06-28 | Summer is here and outdoor games are being played so let's use up some scrap wood. I made these for my wife's co-worker and while they may seem simple to make, I can assure you that while they’re not hard, they are not as easy as you might think. Have a look and enjoy!!Outdoor dice gamesFor kids: icebreakerideas.com/dice-gamesYard Yatzee: lifesewsavory.com/yard-yahtzeeOther Outdoor Dice games: http://thehobbyts.com/fun-dice-games-ultimate-list==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"Sunny Looks Good on You" by Midnight North “Hitting The Streets” by JR Tundra
Shop Tips Chris Cute 2018-06-14 | I have a few Shop Tips for you that I hope will either make your shop life easier in the future or stand as a gentle reminder. These are various tips from pen making to jointers & planers and of course because it's me, there is also a tip about finishes. I hope you find them useful. Cheers!==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell “Hitting The Streets” by JR Tundra
Blotch and Briwax Chris Cute 2018-05-26 | Have you ever wondered which type of stain blotches less or have you assumed they all perform in the same way when applied to untreated wood? Well, I can't say that this is the definitive answer, but it may help you decide which type of product to choose for a future project of yours.Just as a side note: There is A LOT of information NOT in this video about stains, dye's, Blotch and Briwax that could have been included. However, in an effort to keep this under an hour long, much was not discussed or explained. I trust that you will bring up such things in the comments below and I would encourage you to do so in order for others to learn from your experiences.Cheers!Charles Neil's pre-color conditioner can be found here: http://charlesneilwoodworking.3dcartstores.com/Charles-Neils-Pre-Color-Conditioner--Blotch-Control_p_47.htmlFor more videos and information on finishing you may be interested in this: youtube.com/playlist?list=PLVQ607vevyCSa24g2r6VGo9TVtMmsb9jB==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellThe Chance by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com
Travel Log 03 - Back To Canada Chris Cute 2018-05-18 | I had such a great time on this trip that I think I need a vacation from my vacation. Many thanks go out to Mark & Gail Christopher, Sandra in London as well as Jason & Genevieve in New Brunswick. Without you I couldn't have managed this. Thank You So Much!Cheers!==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellEvening Melodrama by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1200049Artist: http://incompetech.com"Circus Tent Netherworld Shanty" by Kevin MacLeod"800 Lives" by Everet AlmondComfortable Mystery 2 - Film Noire by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100537Artist: http://incompetech.com"On My Way Home" by The 126ersBright Wish by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100377Artist: http://incompetech.com
Travel Log 02 England Chris Cute 2018-05-10 | Travel Log 02 EnglandTraveling again, but this time it's to a country that has been on my bucket list to see since I was a kid. Join me as we head over to Birmingham in the UK for the Makers Central event and whatever else we can get into..==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellBumbly March - Music to Delight by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100425Artist: http://incompetech.comBig Horns Intro 2 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com"Once" by Silent PartnerPrelude No. 20 by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://chriszabriskie.com/preludesArtist: http://chriszabriskie.comGold Rush by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100217Artist: http://incompetech.comGuiton Sketch by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100473Artist: http://incompetech.com
Travel Log-01 Canada Chris Cute 2018-05-03 | I'm going to be out of my shop for the next 3 weeks because I'm traveling to meet up with some maker friends and hopefully make some new ones along the way. The first leg of my journey begins in Halifax, Nova Scotia - Canada. Let's take off and see who we run into...........==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellCool Intro - Stings by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100504Artist: http://incompetech.comCorncob - Country by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100565Artist: http://incompetech.com"Crawdad Stomp" by Josh Kirsch/Media Right ProductionsHome Base Groove by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100563Artist: http://incompetech.comSunset Strip by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com"Sunshine Samba" by Chris Haugen
Scrap Wood Step Stool Chris Cute 2018-04-26 | Scrap wood, cut offs.... whatever you want to call them, I had some left over material laying around so I thought I'd put it to use. This is a pretty simple Step Stool project that could be done using only a circular saw, Jig saw and a drill. I hope you find the idea and project useful. Cheers! You can find more Scrap Wood Projects here: youtube.com/playlist?list=PLVQ607vevyCR1aO_jYlmvIdWDZdwJO0FD==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"Off The Rebound" by Silent Partner"Mountain" by Text Me Records / Bobby Renz"Next Funk" by Everet AlmondBeach Bum - Happy Rock by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100347Artist: http://incompetech.com “Hitting The Streets” by JR Tundra
Tool Perspectives with Jae Rivera Chris Cute 2018-04-19 | Today I welcome my good friend Jae Rivera into my shop to discuss our different perspectives on tools. In particular, we talk about the difference between The DeWalt DCKTS77C2 and the Porter Cable PCCK602L2 Drill / Driver sets from a professional point of view verses a DIY home owner stand point. We hope that you'll find something useful to take something away from our discussion. Cheers!==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)
Belt Sander Jig Chris Cute 2018-04-05 | Do you have a belt sander? If you do, then this Belt Sander Jig may interest you. This is a simple jig that you can modify to fit the belt sander you own and turn it into an edge sander as well as a horizontal sander. No plans are available for this, but you should be able to just see it in order to make one for yourself.==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellFlutey Sting by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100435Artist: http://incompetech.com
Rikon rk50122 Chris Cute 2018-03-29 | I recently purchased the Rikon rk50122 combination belt & disc sander. I thought that perhaps some of you may be in the market for a similar machine and be interested in having a look at this one. While I can't do a "review" on this machine, I can give you my pro vs con initial thoughts on it to perhaps help you make your own decision.==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellCountry Cue 1 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com “Hitting The Streets” by JR Tundra
DIY - Any Size Circle Cutting Jig Chris Cute 2018-03-15 | Band Saw Circle Cutting Jigs are not new to the woodworking world, but I had an idea for a circle cutting jig that didn't rely on a series of holes at set increments to set the diameter of a circle. Rather, I thought it more useful to set that measurement to virtually any size you wanted by utilizing a sliding dovetail and centering pin. That's when I had the idea for this jig design. I hope you find it useful.============================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ____________________________________Video Music & sfx: (All music and sfx unless otherwise noted are taken from the YouTube audio library)“Run” by Ethan MeixsellBack To The Wood by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com"Sleepy Jake" by Silent Partner" Rooftops" by Silent PartnerC-Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100001Artist: http://incompetech.com “Hitting The Streets” by JR Tundra
Porter Cable PCCK602L2 Chris Cute 2018-03-01 | **SORRY** I made a mistake. This sale is going on now thru May 5th 2018, so you have a few months to take advantage of that if you so choose.This is not a review video. This is just a quick video on what's in the package and it's a heads up on a sale for this that ends on MAY 5th 2018. How this combo set will fair over time is going to the true test, but if you're in the market I thought you might like to have a look.Thanks to everyone over on Facebook who sent me their recommendations on which combo set I should look into. It's very much appreciated.============================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___ Video Music & sfx: (All music and sfx unless otherwise noted are taken from the YouTube audio library)“Run” by Ethan Meixsell “Hitting The Streets” by JR Tundra
Scrap Wood For Safety? Table saw Basics Chris Cute 2018-02-18 | Can scrap wood be used to help keep you safe in the shop? You bet it can. For you shop veterans, you probably already know what I'm talking about. However, if you're just getting started using a table saw or perhaps thinking about getting your first one, then what I have for you today should be of some interest.For a great push stick (at least in my opinion) then contact Jason below.McGinn's Woodshop on Facebook (leave him a message and he'll get back to you) : facebook.com/McGinnsWoodshop==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"Rural Stride" by Josh Kirsch/Media Right Productions “Hitting The Streets” by JR Tundra
Scrap Wood Projects Chris Cute 2018-02-15 | Scrap Wood. What's it good for? Well, you name it, pretty much anything from prototyping to just messing around and not caring too much if you get it wrong. Creatively, it's always fun to see what you can come up with. So, let's make something.........==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"Firefly" by Chris HaugenNews Theme 1 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com"Front Porch Blues" by Chris Haugen “Hitting The Streets” by JR Tundra
How To Air Dry Wood Chris Cute 2018-02-01 | Thinking about milling and/or drying your own wood? Have questions about the process? Well, today I'll show you how I go about doing it and have had success with in the past.It's important to understand that wood will only dry to the point of it's surroundings. Any wood intended for indoor projects must complete it's drying process in that indoor environment. Below are some links to information that you may want to familiarize yourself with.Popular Woodworking - Air Drying Lumber: popularwoodworking.com/projects/air-drying-lumberDrying Wood At Home: http://www.wood-database.com/wood-articles/drying-wood-at-homeWhat is "EMC" and why is it important?: http://ecosystems.psu.edu/research/centers/private-forests/news/2014/air-drying-lumberWood Moisture Content: http://www.lonniebird.com/wood-moisture-content-by-lonnie-bird==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellFor Mimi by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://www.twinmusicom.org “Hitting The Streets” by JR Tundra
The Woodworking Show - Springfield 2018 Chris Cute 2018-01-18 | The Woodworking Show - Springfield 2018. Have a look at the stuff, the presentations and most importantly......The People. We had a great time. I hope you enjoy! Cheers!For info on The Woodworking Shows: http://www.thewoodworkingshows.com==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellAmbler - Video Classica by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300019Artist: http://incompetech.com"Surfing Llama" by Bird Creek "Next Funk" by Everet Almond “Hitting The Streets” by JR Tundra
Springfield Lobby Talk Chris Cute 2018-01-15 | This past weekend at the woodworking show that was held in Springfield, I had the opportunity to talk on camera with several of my friends. What ended up happening was what many of you told me you wanted to see. A VERY informal introduction to the makers who were there. So, get set to briefly meet Tony Rouleau, Paul Granger & Wim Prest as they introduce themselves to you.==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________
CA (super glue) Finish Chris Cute 2018-01-12 | After milling up a piece of Lilac, I promised you that I would show you how I go about putting a CA Finish on it for a pen, so here ya go. I am NOT saying that this is the only way or even the best way to do this, it's just my way of doing it. Hopefully you'll find some of this information helpful if you currently struggle with getting a good CA Finish on a project.More videos on Finishing: youtube.com/playlist?list=PLVQ607vevyCSa24g2r6VGo9TVtMmsb9jBProducts Used:These are not affiliate links. These are just links to the materials I used in the video. They are listed here so that you can take a look, shop around for yourself and decide which products would work best for you.5 Roll Sanding Pack: amazon.com/Woodturner-ins-Multi-Roll-Sanding-Pack/dp/B004NID36I/ref=sr_1_3?ie=UTF8&qid=1515137449&sr=8-3&keywords=5+roll+sanding+packStick Fast Non-stick pen bushings: woodturnerscatalog.com/p/19/6020/Stick-Fast-Non-Stick-Pen-Bushings-4-PackStarbond super fast thin CA glue: amazon.com/gp/product/B00C32ME6G/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1MicroMesh sanding pads: woodturnerscatalog.com/p/36/2459/Micro-Surface-Pen-Finishing-9-Piece-SetHut Ultra Gloss Plastic Polish: woodturnerscatalog.com/p/40/1999/Hut-Ultra-Gloss-Pen-Polish==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell “Hitting The Streets” by JR Tundra
Free Project Wood Chris Cute 2018-01-05 | Free Project Wood? Impossible....right? Nah, if you ignore the time you spend to mill it up, then I can guarantee you that there is free project wood out there for you just waiting to be had. Today I'll show you a simple example of that.Enjoy!Much love to the Ranson family. Bo will not be forgotten. Rest in peace my friend.#branchesarewoodtoo ==================================================If you like this content, please feel free to share it with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellBushwick Tarantella by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300002Artist: http://incompetech.comJumpin Boogie Woogie by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com“Hitting The Streets” by JR Tundra
2017 Year In Review Chris Cute 2017-12-28 | While sitting here reflecting about what went on this year, I figured why not throw a video together to recap just a few of the things that made this year so much fun for me. So, here it is. Happy New Year to you and I hope your 2018 is going to be absolutely AWESOME!!Cheers!!==================================================If you like this content, please feel free to share this video & url with others. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellChucky the Construction Worker - Stings by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100292Artist: http://incompetech.comPentagram by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comDelusion 32 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comStomp It Away by Silent Partner“Hitting The Streets” by JR Tundra
Santas Part-Time Elf Chris Cute 2017-12-14 | This is a little different I know, but it's intended for the kids more so than you folks. So this time get the kids to have a look and I hope they like it.Merry Christmas!The poem "Santa's Part-Time Elf" was written by The Elf. Duh!!Many Thanks To Richard Morley for doing the voice over work on this video. Cheers my friend!!!Richard Morley (BrainFizz) on YouTube: youtube.com/channel/UCwX4xJMViZkXcoYeZ9naNJw==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)Carol Of The Bells by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comOperating System (Sting) by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://www.twinmusicom.orgSilent Night (Instrumental) by Jingle Punks
Childs Toy #8 - Doll Cradle Chris Cute 2017-12-07 | Unfortunately, this is the last toy I'll be able to make this year. I need to go to work for the other Santa now, but if you can, please consider making and/or donating a toy to a needy child yourself this holiday season. You won't regret it I can guarantee you.Cheers !!Here's a playlist I've created that contains all of the toys made this year.Children's Toys playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellThe Mighty Kingdom by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com"Joy To The World Instrumental Jazz" by E's Jammy JamsNoel by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com“Hitting The Streets” by JR Tundra
Childs Toy #7 - Crayon Whale Chris Cute 2017-11-30 | Here's #7 in this series I'm doing. I think I'll be able to get one more done before the other Santa puts me to work for her. I'll give it my best shot anyway. But for now, enjoy this one and please, consider making and/or donating a toy to a needy child yourself this holiday season. Cheers!Children's Toy Playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"Hit My Soul" by Silent Partner"Get There" by Silent PartnerFor Mimi by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://www.twinmusicom.org “Hitting The Streets” by JR Tundra
Childs Toy #6 - Pound A Peg Chris Cute 2017-11-16 | Here's #6 in this series. Enjoy and please, consider making and/or donating a toy to a needy child yourself this holiday season. Cheers!Children's Toy Playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellFeelin Good by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100475Artist: http://incompetech.comPanama Hat by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com"In the Land of Rhinoplasty" by Jingle Punks “Hitting The Streets” by JR Tundra
Childs Toy #5 - Infant Toy-Rattle Chris Cute 2017-11-10 | An infant's toy and rattle is #5 in this series. I'm hoping to get at least one toy per week made before the 24th of December rolls around. Fingers crossed I can do it. Enjoy and please, consider making and/or donating a toy to a needy child yourself this holiday season. Cheers!Children's Toy Playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellHappy Strummin by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com"Cameras" by ALBIS“Hitting The Streets” by JR Tundra
Childs Toy #4 - Wooden Train Chris Cute 2017-11-02 | Here is #4 in this series. I'm hoping to get at least one toy per week made before the 24th of December rolls around. Fingers crossed I can do it. Enjoy this one and please, consider making & giving to a needy child yourself this holiday season. Cheers!Children's Toy Playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellCool Rock - Take the Lead by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100279Artist: http://incompetech.comSkinny Leonard by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com “Hitting The Streets” by JR Tundra
Childs Toy #3 - Bath Boat Chris Cute 2017-10-26 | Here is another child's toy for the upcoming season. This is #3 in the series. I'm hoping to get at least one per week made before the 24th of December rolls around. Enjoy and please, consider making & giving to a needy child yourself this year. Cheers!Children's Toy Playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellAcoustic Guitar 1 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comBoxcar Rag by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com “Hitting The Streets” by JR Tundra
Childs Toy #2 - Tic Tac Toe Chris Cute 2017-10-19 | Making another child's toy for the upcoming season. This is #2 in the series. I'm hoping to get many more made before the 24th of December. Enjoy and please, consider making and/or giving to a needy child yourself this year. Cheers!Children's Toy Playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellHoedown by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comFolk Round by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100357Artist: http://incompetech.com “Hitting The Streets” by JR Tundra
Childs Toy #1 - Pickup Truck Chris Cute 2017-10-12 | Making a child's toy for the upcoming season. This is #1 in the series. We'll see how many more I can make before the 24th of December. Enjoy and please, consider making & giving to a needy child yourself this year. Cheers!Children's Toy Playlist: youtube.com/playlist?list=PLVQ607vevyCRWXH6f1ocuiw-FC-ktpgEU==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellAchaidh Cheide - Celtic by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100340Artist: http://incompetech.comPioneers by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com “Hitting The Streets” by JR Tundra
Father & Son Shop Time Chris Cute 2017-09-21 | There is nothing better than spending some time in the shop with your children.....no matter how old they may be. Extra bonus when the project you make together is for their Mom. Total Win-Win there. Needless to say, I had an awesome time spending a few days with my son. Cheers!!==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixselNEW TITLE1 by ARTIST1 is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://artist1.comOne Fine Day by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comSerenity by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com “Hitting The Streets” by JR Tundra
Raised Panel Jig Chris Cute 2017-08-31 | In this video I show you how to make a jig to create raised panels on your tablesaw.============================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___ Video Music & sfx: (All music and sfx unless otherwise noted are taken from the YouTube audio library)“Run” by Ethan Meixsell “Hitting The Streets” by JR Tundra
Shop Pencil Holder Chris Cute 2017-08-24 | I needed something to keep all of my shop pencils in, so I made a simple pencil holder. The wood is Lilac, the stain is iron acetate w/a blend of colors and the finish is General Finishes "Wood Turners Finish". ==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellAlison by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com “Hitting The Streets” by JR Tundra
Scrap Wood On Hold Chris Cute 2017-08-18 | This is a little different.....yeah, I'll go with that. Enjoy and have a FANTASTIC weekend!!Cheers!!==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellTexas Techno by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com“Hitting The Streets” by JR Tundra
Various Shop Tips Chris Cute 2017-08-03 | I had a few questions about finishing with polyurethane that I felt I should answer and I just have a few shop ideas to pass along that hopefully you'll find helpful. Cheers!!==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell “Hitting The Streets” by JR Tundra
Taylors Tee Pee - A DiResta Meet Up Chris Cute 2017-07-27 | Taylor Forrest wanted some help constructing a Tee Pee so, Jimmy DiResta asked several of us to help out. Taylor got the help......and then some. More below........What a great time. Many Thanks to Taylor & Jimmy for inviting us to their place and putting us all up for the weekend! That was fun!! The Awesome people who were in attendance:Taylor Forrest - https://www.youtube.com/channel/UClBK...Jimmy Diresta - https://www.youtube.com/user/jimmydir...Willie !!!Bear the dogThe ChickensAndy Birkey - https://www.youtube.com/channel/UCzYy...Jae Rivera - youtube.com/channel/UC2-SB8pIWpiYxaE8knFh2-wKris Duthie - https://www.instagram.com/krismarkdut...Zack Herberholz - youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wLaura Kampf - https://www.youtube.com/channel/UCRix...Giaco Whatever - https://www.youtube.com/channel/UCYH-...Paul Meyette - youtube.com/channel/UC-bRGrHpw06YsACDbUSSyMwRhodyJeff - https://www.youtube.com/channel/UClO7...Tim Sway - youtube.com/user/timswayVance Maker - https://www.youtube.com/channel/UCu12...David Gagne - youtube.com/channel/UCQCIts-RYRGzie7OVYGfEWgPaul Jackman - https://www.youtube.com/user/JackmanC...NIck Ryan - youtube.com/user/WCGBrett Mcafee - https://www.youtube.com/channel/UCPqU...Tony & Mackenzie Rouleau - https://www.youtube.com/channel/UC5fL...Graz Makes- https://www.youtube.com/channel/UCS3L...Derek Forestier - instagram.com/dcforester1Keith Decent - youtube.com/user/ProtojonesAnd I'm sure I've missed a few more. Good Times people!!!==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan MeixsellBalzan Groove - Vadodara by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100311Artist: http://incompetech.comYou So Zany by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comGold Rush by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100217Artist: http://incompetech.comDirt Road Traveler by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comDaily Beetle by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1500025Artist: http://incompetech.com “Hitting The Streets” by JR Tundra
Makers Central Chris Cute 2017-07-19 | Makers Central is a HUGE event that's happening in the UK next year. A LOT of people are already committed to going and it would be great if you could make plans to attend as well.Makers International with Nick Zammeti: youtube.com/watch?v=e1OHg4J79Z0Makers Central web site: http://www.makerscentral.co.ukMakers Central Facebook: facebook.com/makerscentralNick's channel (NZ Woodturning): youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymASawblade.com web site: sawblade.com==================================================If you like this content, please feel free to share it with others. Also click on the subscribe button before leaving. That way you’ll be notified when I have new content to share. Thanks for watching and have a great day!=================================================DISCLAIMERREAD THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please stay safe, work smart and only attempt to do the things that YOU feel safe doing. Thank You.==================================================If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).Facebook : facebook.com/MakeTheFirstCut You can also find me on:Google+ : plus.google.com/u/0/109459687839566728278/posts/p/pubEmail: MakeTheFirstCut@gmail.com ___________________________________________________ Video Music & sfx: (All music and sfx are taken from the YouTube audio library)“Run” by Ethan Meixsell"Rock Intro 3" by Audiotronics “Hitting The Streets” by JR Tundra
