Design, Model and Build a Professional Carpenters Footstool The Digital Jobsite 2017-02-19 | This video shows how to model a virtual set of plans for the tried-and-true footstool I've used for 20+ years on trim projects. I uploaded the stool model to the SketchUp Component Warehouse for download... just search "Professional Carpenter's Footstool" and download it to follow along with the video. Viewers can then follow me into my shop for a Next Level Carpentry series that shows how I build an analog stool from the digital model. My goal is to show how well SketchUp works for the design build process by inviting Digital Jobsite subscribers to check out Next Level Carpentry content with this 'cross-platform' video series.Viewers often ask how I orbit around so smoothly in my tutorials. The answer is with a 3D 'joystick' Space Mouse Pro from 3D Connexion. If you want to increase your modeling speed and enjoyment exponentially and decide to buy a joystick mouse please consider using one of these links to buy one through Amazon:This is the Space Mouse Pro that I use (and couldn't live without):http://amzn.to/2mE01x1This is the less expensive Space Navigator which is miles ahead of a typical 3-button mouse:http://amzn.to/2mhBdIFEarnings from their affiliate program help fund The Digital Jobsite and keep my SketchUp tutorials free. Thank you!!
Visualize Exterior Remodeling Design with SketchUp Photomatch The Digital Jobsite 2017-03-10 | Learn how to leverage the capabilities of SketchUp's Photo Match feature for planning and presenting design ideas for exterior remodeling projects. This tutorial walks through the steps I use to import a photo and set it up to interface with a fully functional 3D SketchUp model.Viewers often ask how I orbit around so smoothly in my tutorials. The answer is with a 3D 'joystick' Space Mouse Pro from 3D Connexion. If you want to increase your modeling speed and enjoyment exponentially and decide to buy a joystick mouse please consider using one of these links to buy one through Amazon:This is the Space Mouse Pro that I use (and couldn't live without):http://amzn.to/2mE01x1This is the less expensive Space Navigator which is a vast improvement compared to a standard 3-button mouse:http://amzn.to/2mhBdIFEarnings from the Amazon Affiliate program help fund The Digital Jobsite and keep my SketchUp tutorials free. Thank you!!
How to Draw Board and Batten Siding with SketchUp The Digital Jobsite 2016-12-25 | This tutorial is Part 3 of the How to Cut Lumber in SketchUp Series and shows how I use modeling methods to cut, fit and 'install' board and batten style siding on a gable-roofed shed. The video was produced in response to a viewer comment about having difficulty 'drawing' angled siding pieces of various lengths for gable ends so I hope it addresses that question and helps others with modeling and building projects as well.
How to Calculate Compound Miter Angles with My.SketchUp.com The Digital Jobsite 2016-12-18 | Learn how to use My.SketchUp.com, the free, browser based 3D modeling program as a visual construction calculator to calculate basic compound miter angles.
Using My.SketchUp.com as a Visual Construction Calculator The Digital Jobsite 2016-11-28 | Learn how to use My.SketchUp.com, a free, browser-based 3D modeling program as a visual construction calculator and do all the math needed for building a set of stairs.Viewers often ask how I orbit around so smoothly in my tutorials. The answer is with a Space Mouse Pro 'joystick' mouse from 3D Connexion. If you want to increase your modeling speed and enjoyment exponentially and decide to buy a Space Mouse using this link to buy one through Amazon:http://amzn.to/2mE01x1earnings from their affiliate program will pay The Digital Jobsite to keep my SketchUp tutorials free. Thank you!!
Making Tuscan Order Dimension Calculations using SketchUp The Digital Jobsite 2016-10-19 | The Tuscan Order has been used through the ages to calculate proportions for pleasing architectural design. This video shows how Trimble SketchUp can be used as a visual calculator to determine exact dimensions to achieve visually pleasing proportions. You can download the model used in this video from the SketchUp Component Warehouse by searching "Tuscan Order Meets SketchUp" or by following this link:3dwarehouse.sketchup.com/search.html?q=tuscan+order+meets+sketchup&backendClass=entity
Mantle Planning with SketchUp Photomatch The Digital Jobsite 2016-02-06 | Learn how to use the Photomatch feature of SketchUp for design and planning choices. This tutorial shows steps I use to import a SketchUp model into a jobsite photo so a client can visualize how a proposed mantle piece will actually look in their new home.
Cutting Lumber with SketchUp Part 2 Compound Miters The Digital Jobsite 2016-01-17 | Making compound angle cuts in SketchUp is simple using the methods I show in this tutorial. Learn the basics of setting a "cutting plane" and then how to use the digital power of SketchUp to create shapes with any number of sides and at any angle... all at The Digital Jobsite!
Cutting Lumber with SketchUp Part 1: Basic Cuts and Notches The Digital Jobsite 2016-01-13 | Learn how to "cut" boards in SketchUp. 3D modeling of boards is the same thing, only different, than drawing them by hand or cutting them in analog carpentry. This tutorial series shows that cutting in SketchUp is much easier than either analog process. Watch the How to Draw Lumber with SketchUp Series on this channel to learn how to 'draw' the boards that get cut here.Viewers often ask how I orbit around so smoothly in my tutorials. The answer is with a Space Mouse Pro 'joystick' mouse from 3D Connexion. If you want to increase your modeling speed and enjoyment exponentially and decide to buy a Space Mouse using this link to buy one through Amazon:http://a.co/bjTcGnPearnings from their affiliate program will help pay The Digital Jobsite to keep my SketchUp tutorials free. Thank you!!
Drawing Lumber with SketchUp Series Part 8 How to Draw Roof Trusses The Digital Jobsite 2015-12-31 | Complicated roof trusses are surprisingly simple to draw with SketchUp using methods explained in this tutorial which is the last of the "How to Draw Lumber" series at The Digital Jobsite. Learn how to use Groups and Components to simplify the process and draw great looking roof trusses for your digital carpentry projects!Viewers often ask how I orbit around so smoothly in my tutorials. The answer is with a Space Mouse Pro 'joystick' mouse from 3D Connexion. If you want to increase your modeling speed and enjoyment exponentially and decide to buy a Space Mouse using this link to buy one through Amazon:http://amzn.to/2mE01x1earnings from their affiliate program will help pay The Digital Jobsite to keep my SketchUp tutorials free. Thank you!!
Part 7 How to Draw Floor Trusses and Foundations The Digital Jobsite 2015-12-27 | There's a LOT of modeling information in this tutorial... so watch it from the beginning to learn the whole process or use this timeline index to dial in to the parts you're interested in:0:00:00 How to draw a basic concrete foundation wall & footing0:11:11 How to add 2x6 treated lumber sill plates0:17:25 How to draw a bottom-chord bearing floor truss0:27:50 How to draw a top-chord bearing floor trussViewers often ask how I orbit around so smoothly in my tutorials. The answer is with a Space Mouse Pro 'joystick' mouse from 3D Connexion. If you want to increase your modeling speed and enjoyment exponentially and decide to buy a Space Mouse using this link to buy one through Amazon:http://amzn.to/2mE01x1earnings from their affiliate program will help pay The Digital Jobsite to keep my SketchUp tutorials free. Thank you!!
Drawing Lumber with SketchUp Series Part 6 How to Draw OSB and Styrofoam Panels The Digital Jobsite 2015-12-21 | OSB and styrofoam panels are a common material for wall and roof sheathing. This video shows how to easily create realistic panels to enhance the look of your SketchUp building models. For an added touch, watch the final segment of the video where I show how to add 'brand text' to foam panels for near-the-top model realism.
How to Draw Corrugated Metal on a Curved Awning Roof The Digital Jobsite 2015-12-17 | Using a simple process with cool results this video shows how to bend corrugated metal to fit a curved roof surface in a SketchUp model. Learn steps to take the profile from a straight panel and shape it to fit a curve by using the Follow Me tool. Plus learn a few tricks for fitting corrugated metal panels used for exterior wall covering.
Drawing Metal Panels with SketchUp Series Part 1: How to Draw Corrugated Metal Panels The Digital Jobsite 2015-12-15 | Corrugated metal panels are a popular siding and accent feature in building today. This tutorial shows how to easily model panels and, in the Building With Bytes segment, how to 'cut' corrugated metal to fit a gable roof and around a window opening.
Drawing Lumber with SketchUp Series Part 5: How to Draw I Joists and LVLs The Digital Jobsite 2015-12-03 | Learn how to draw and 'build' with I-joists and LVL beams to add these engineered wood products to your SketchUp models. Building with bytes before boards you can plan ahead to minimize waste when it comes time to build the project you are planning.
Drawing Lumber with SketchUp Series Part 4: How to Draw 4x4 and 6x6 Posts The Digital Jobsite 2015-11-30 | If you need to add 4x4 or 6x6 posts to your SketchUp model watch this tutorial for ways to do it quickly and easily. I show how to model posts, add redwood texture and then notch and multiply a couple 6x6's to serve as supports for a deck overhang.
Drawing Lumber with SketchUp Series Part 3: How to Draw Plywood Panels The Digital Jobsite 2015-11-29 | This tutorial will show you how to easily model both T&G subfloor and 1/2" plywood sheathing and work with them in a framing model.
The Digital Jobsite: How to Draw Framing Lumber The Digital Jobsite 2015-11-28 | Learn how to draw any size of framing lumber for building your SketchUp model project. You can quickly model anything from a 2x4 to a 2x12 using a few simple steps. Models you create using these methods will help plan and design your project by 'building with bytes before boards'!
The Digital Jobsite: How to Draw a 2x4 with SketchUp The Digital Jobsite 2015-11-27 | Learn how to draw a 2x4, the most ubiquitous piece of framing lumber, with SketchUp. From sheds to remodeling projects to tiny house planning, almost every carpentry project uses 2x4's so you'll be off to a good start when you know how to draw and work with them.Viewers often ask how I orbit around so smoothly in my tutorials. The answer is with a Space Mouse Pro 'joystick' mouse from 3D Connexion. If you want to increase your modeling speed and enjoyment exponentially and decide to buy a Space Mouse using this link to buy one through Amazon:http://amzn.to/2mE01x1earnings from their affiliate program will help pay The Digital Jobsite to keep my SketchUp tutorials free. Thank you!!
Make Great Looking Trim for your SketchUp Model The Digital Jobsite 2014-03-18 | Take your SketchUp model up a notch with great looking trim for windows and doors. This tutorial shows some tricks and tips for creating realistic looking casing for windows and doors
Shed Wall Layout and Framing Basics Part Two The Digital Jobsite 2013-04-25 | This second segment of a two part series shows how "backing" for pegboard in corners and rough openings for a door and window are incorporated into wall framing for this simple sturdy shed.
Shed Wall Layout and Framing Basics Part One The Digital Jobsite 2013-04-24 | This video is part one of two that show wall framing layout basics including 12", 16", 19.2" and 24" on center studs as well as corner backing and framing for rough openings.
Digital Jobsite Channel Subscription Invitation The Digital Jobsite 2013-04-12 | Attention New Viewers!Check out this short introductory video subscription invitation for an overview of tutorial content available for FREE here on The Digital Jobsite Channel. Subscribe for e-mail alerts for new tutorials as soon as they're uploaded. Subscriber questions and comments are welcome to help you learn carpentry and SketchUp like a pro!
Begin With the end in Mind Part Two The Digital Jobsite 2013-04-08 | This second of two parts of the Begin with the End in Mind series at The Digital Jobsite Blog at http://www.finehomebuilding.com/blog/digital-job-site shows how to assemble, square up and put subfloor plywood down on a simple, sturdy garden toolshed.
Begin with the End in Mind Part One The Digital Jobsite 2013-04-07 | This video give a visual descriptive overview of concepts for layout work in general and an 8'x8' shed with 4'x9' siding panels specifically. Check out the "Begin with the End in Mind" blog post at finehomebuilding.com for more in-depth information on this video. Make sure to watch Part Two of this video to learn how to assemble and square-up the shed floor shown here.
A Step Ahead to Build a Shed Tutorial Part One The Digital Jobsite 2013-03-29 | This video is an overview of SketchUp model of a simple, sturdy, functional tool shed created for the "A Step Ahead to Build a Shed" tutorial series for The Digital Jobsite Blog at finehomebuilding.com.
Carpenters Introduction to 3D Modelling Day Three The Digital Jobsite 2013-02-25 | Graduation day for Carpenter's Introduction to 3D Modelling where finishing touches are added to the basic stack-able sawhorse model. Watch the video to the end to see how to turn 1 sawhorse into an entire corral full of 100 saw-ponies! Be sure to visit The Digital Jobsite at finehomebuilding.com for the other 2 tutorial videos in this series.
Carpenters Introduction to 3D Modelling Day Two The Digital Jobsite 2013-02-25 | This video is Day Two of a Carpenter's Introduction to 3D Modelling where sawhorse legs are created. The tutorial shows differences between groups and components and uses the move and rotate tools to make a leg component. Be sure to visit The Digital Jobsite at finehomebuilding.com for the other 2 tutorial videos in this series.
Carpenters Introduction to 3D Modelling Day One The Digital Jobsite 2013-02-25 | Model a sturdy, functional set of 3D sawhorses! Just like a carpenter's first day on the job, this video covers some basics of using SketchUp to begin digital carpentry. Be sure to visit The Digital Jobsite at finehomebuilding.com for the other 2 tutorial videos in this series.
Deck Stairs 101 Video Tutorial The Digital Jobsite 2013-02-15 | Struggling to understand layout and building for stairs to a deck? This video gives an in-depth look into how rise and run calculations are applied to stringers for deck stair design.
Exploring Octagonal Roof Framing Part Two The Digital Jobsite 2013-01-29 | This video shows how the octagonal roof framing model was created with SketchUp for the "Exploring Octagonal Roof Framing" tutorial at The Digital Jobsite Blog on finehomebuilding.com. Watch "Exploring Octagonal Roof Framing Part One" to see how a complete framed roof looks.
Exploring Octagonal Roof Framing Part One The Digital Jobsite 2013-01-29 | Watch this video for a virtual tour of an octagonal roof framing model created in SketchUp for the "Exploring Octagonal Roof Framing" tutorial at The Digital Jobsite Blog on finehomebuilding.com. Look for the follow up video that shows methods used to create this mode.
Happy New Year from The Digtial Jobsite The Digital Jobsite 2012-12-31 | A short tutorial on modelling a sphere in SketchUp and using the 3D Text Tool to wish viewers and visitors a Happy New Year 2013 from The Digital Jobsite at finehomebuilding.com
Visual Construction Calculator Quick Start Guide Part Two The Digital Jobsite 2012-12-24 | A video tutorial for using SketchUp as a visual construction calculator. In part two of two learn how to calculate volume of a variety of shapes as well as area and volume for irregular shaped areas such as patios and footpaths.
Visual Construction Calculator Quick Start Guide Part One The Digital Jobsite 2012-12-24 | A video tutorial for using SketchUp as a visual construction calculator. In part one of two learn how to do basic division, multiplication and area calculations with the benefit of visualizing the answers to various construction math problems
A Tale of Two Pitches Part Two The Digital Jobsite 2012-12-17 | The second of two videos for the "A Tale of Two Pitches" blog post at The Digital Jobsite blog at finehomebuilding.com. Explore a fully detailed 3D SketchUp model in depth to see all the framing required in an off angle hip/valley roof including all the common rafters, hip rafters, valley rafters as well as hip and valley jack rafters in this video tutorial. Be sure to visit The Digital Jobsite blog for more insight and information on this complex carpentry condition.Viewers often ask how I orbit around so smoothly in my tutorials. The answer is with a 3D 'joystick' Space Mouse Pro from 3D Connexion. If you want to increase your modeling speed and enjoyment exponentially and decide to buy a joystick mouse please consider using one of these links to buy one through Amazon:This is the Space Mouse Pro that I use (and couldn't live without):http://amzn.to/2mE01x1This is the less expensive Space Navigator which is miles ahead of a typical 3-button mouse:http://amzn.to/2mhBdIFEarnings from their affiliate program help fund The Digital Jobsite and keep my SketchUp tutorials free. Thank you!!
A Tale of Two Pitches Part One The Digital Jobsite 2012-12-17 | The first of two videos for the "A Tale of Two Pitches" blog post at The Digital Jobsite blog at finehomebuilding.com. The why and how of off angle hip/valley framing is explained and explored in this tutorial video. Go to The Digital Jobsite blog for more insight and information on this complex carpentry condition.
Super Size Me Working with Details in SketchUp Part Two The Digital Jobsite 2012-12-12 | This video is part two of two that show methods for creating small objects in SketchUp without holes or gaps that result from using the Follow Me tool to create them
Super Size Me Working with Details in SketchUp Part One The Digital Jobsite 2012-12-12 | This video is part one of two that show methods for creating small objects in SketchUp without holes or gaps that result from using the Follow Me tool to create them.
Paint Scheme ing With SketchUp Part Two The Digital Jobsite 2012-11-26 | A Digital Jobsite Tutorial showing Part Two on how a SketchUp model can be used for paint scheme planning
Paint Scheme ing With SketchUp Part One The Digital Jobsite 2012-11-26 | A Digital Jobsite Tutorial showing Part One on how a SketchUp model can be used for paint scheme planning
Working Model Cabinet Modifications The Digital Jobsite 2012-07-18 | This second part of the two-part Working Model tutorial series shows how to use an unrefined SketchUp model to answer "what if?" design questions by quickly modifying cabinet proportions with the the Move tool. Go to The Digital Jobsite blog at finehomebuilding.com for more in depth information on this video and series.
Working Model Adding Crown Moulding The Digital Jobsite 2012-07-13 | This video is part one of two showing how to work through remodeling design issues using an unrefined SketchUp model. I show how to use layers for visualizing different shower glass configurations and how a master bathroom looks with or without cherry crown moulding. Visit The Digital Jobsite at finehomebuilding.com for more detailed information about this video series.
Model and Measure Hip Rafters De-mystified by Measuring in SketchUp.wmv The Digital Jobsite 2012-03-27 | This video (Part Three of the 3-part Model and Measure series) shows how to measure rafter components modeled in SketchUp for use in layout and cutting hip roof rafters. Visit The Digital Jobsite Blog at finehomebuilding.com for more information relating to this video. There you'll also find links to Part One and Part Two of this 3-part Model and Measure series.
Model and Measure Hip Rafters De-mystified by Modeling in SketchUp Part B.wmv The Digital Jobsite 2012-03-20 | This video shows the quickest way I know to create 64 jack rafters for a hip roof framing model. Check out Part A where I model the hip rafter that supports these jack rafters. Be sure to visit The Digital Jobsite blog at finehomebuilding.com for text that explains this drawing process in depth.
Model and Measure Hip Rafters De-mystified by Modeling in SketchUp Part A.wmv The Digital Jobsite 2012-03-20 | This video shows how to draw a hip rafter with SketchUp using streamlined methods to achieve quick results. A Part B companion video that shows how to quickly draw hip jack rafters is also available for viewing at The Timber Tailor's Digital Jobsite Channel. View both Part A and Part B along with text that helps teach this modeling process at http://www.finehomebuilding.com/item/22522/model-measure-hip-roof-framing-de-mystified-by-modeling-in-sketchup
Model and Measure: Hip Rafters De-mystified by Visualizing in SketchUp The Digital Jobsite 2012-03-13 | This video clip is Part One of three showing my "Model and Measure" process for understanding hip roof framing geometry, modeling hip and hip jack rafters and then measuring the model for actual hip roof framing member dimensions. Get more insight into this 3-part video series on The Digital Jobsite blog at http://www.finehomebuilding.com/blog/digital-job-site. You can download the model created for this series from the SketchUp Component Warehouse here: http://sketchup.google.com/3dwarehouse/details?mid=b3df960ac39e61469461677ed34b391
SwitchUp to SketchUp Part Two.wmv The Digital Jobsite 2012-02-29 | This video (part two of two) shows how I "built" the raised panel cabinet doors and decorative mantle for the SwitchUp to SketchUp Part One video model. Hope this gives you some insight into the process for going digital with design. Go to http://www.finehomebuilding.com/item/22040/switchup-to-sketchup-going-digital-with-design to view this video at The Digital Jobsite Blog where there is more relevant material
SwitchUp to SketchUp Part One.wmv The Digital Jobsite 2012-02-29 | This video (part one of two) shows techniques to SpeedUp the alteration process when you SwitchUp to SketchUp for going digital with design. Go to http://www.finehomebuilding.com/item/22040/switchup-to-sketchup-going-digital-with-design to view this video at The Digital Jobsite Blog where there is more relevant material
