You will like this video so much, that you may jump back and kiss yourself for watching it!
Pulitzer Opal
In this video, two important topics are covered: How opal originally formed, and Bubble Opal, a rare type of opal that is not known by the majority of people in the opal realm.
You will like this video so much, that you may jump back and kiss yourself for watching it!
You will like this video so much, that you may jump back and kiss yourself for watching it!
updated 3 years ago
You will like this video so much, that you may jump back and kiss yourself for watching it!
Shewa Opal Stabilization –
The goal of treatment is to remove all of the water and replace it with epoxy resin.
You must use Hxtal Epoxy. It is the world’s best epoxy and dries crystal clear and is very strong. It is used by museums to restore artifacts and art work. HXTAL IS EXPENSIVE. If you do not use it, I don’t believe that you will be successful. In order to do this, you need to replace the water with something that mixes with water, but also mixes with epoxy resin. Acetone is that “something.”
1. Never let Shewa opal dry out or it will be ruined. Acetone is the fastest drying liquid at room temperature, so be very careful.
2. Take water soaked Shewa opal, wipe off the excess water and put the stones in 100% acetone.
3. After about 12 hours at room temperature, the water in the stones be fully mixed with acetone. The acetone is then NOT 100% any more.
4. Repeat this step 3-5 more times. Remember that the goal is to reduce the amount of water in the acetone. Epoxy does not mix with water.
5. The more acetone in the container, the lower the concentration of water, so use as much acetone as your container will allow.
6. Pour out acetone out and immediately pour the Hxtal resin in. Completely cover the stones, then add about an extra inch of resin on top.
7. Heat resin to 180° F for 3-6 days. For stones thicker than one inch (2.5 cm), as much as 7-10 days may be necessary.
a. I personally use a vacuum oven, but honestly, I do not believe that vacuum is not necessary.
8. Take out of oven and let cool to room temperature, preferably 65-70°F.
9. Pour out resin and wipe excess off of the stones
10. Paint thick layer of hardener on stones and place on flexible plastic sheeting (Epoxy will not adhere strongly to plastics). Zip lock plastic bags work fine.
11. Place stones in spot where they are in the 70°s for 4-6 days. The lower the temperature, the more slowly it will harden. For thick stones, I believe that a temperature of 60-65° F for up to 10-12 days may work better (I have not tested this.
12. You may wipe the excess hardener off, then place the stones in a place at 85-95° F for 3-4 days. Heating cures epoxy much faster than at room temperature
13. After curing, there will be excess hardener on the stones. It is best to wipe this off with cloth. Ethyl or Isopropyl alcohol (95-100%) may help remove the residual hardener. (Tested, but not proven.
Mother's Day!
Using techniques similar to those used by by Native Americans, an opal arrowhead is fabricated.
Contents:
0:00 Introduction
0:33 arrowhead making
2:28 Getting a Great Opal for a Low Price
2:55 Options For Procuring Good Opal
4:51 Opal Mosaic Making
06:11 Working with Jewelry and Opal Mosaics
07:44 Final Results
08:16 Giveaway Winners
08:47 How to Learn Everything about Opal
11:17 Final Remarks
In addition, I take a piece of Coober Pedy crystal opal and use a thin slice of it to make an opal doublet. The technique of making an opal doublet is demonstrated.
In this video I also use flintknapping techniques to make a beautiful opal arrowhead out of semi-crystal Opal from Coober Pedy South Australia. No animals were harmed in the creation of this video
The 297 ct opal was difficult because it was covered with sand (matrix) and had a number of cracks. I ended up making 5 cabochons (total weight of 145 carats), including one that very closely resembles a fossil (opalized) clam.
Opal et AL
Sellers of Australian Opal
opaletal.com
Opal et AL of Facebook
email: opal.sales@gmail.com
The video features interesting things from nature, including prionus beetles in a mating dance and Eastern Box turtles in a reverse dance. Lots of fun!
In this video, I use 3 pieces of Andamooka matrix opal. One is made into an opal arrowhead. One other is "Gem Matrix opal," matrix opal that shows good color without having to be treated. The third is ordinary matrix opal.
I demonstrate the steps in treating matrix opal, first treating it in concentrated sugar solution and then with concentrated sulfuric acid. I am helped by Sheila and my cats and kittens. A Japanese beetle also shown.
The results reveal that some matrix opal (the "gem matrix") does not treat at all, whereas the other opal treated extremely well, producing a stunning 40ct cabochon. In a surprise, the sugar from candy is used instead of the usual can sugar.
Giveaway winners may contact me at info@pulitzeropal.com
Diamond lapidary wheels:
Company name: Baltic Abrasive Technologies.
www.baltic-abrasives.com
E-shop: www.lapidarywheels.com
In the PULITZER UNIVERSITY section, I show and discuss natural black Andamooka matrix opal and Painted Ladies.
Watch as I make (in fast motion) TWO ARROWHEADS, one of crystal opal and another of Bloodstone from India. BOTH WILL BE GIVEN AWAY, along with a vial of dazzling opal flakes, 2 painted lady opals and a piece of polished natural black Andamooka matrix (UNTREATED AND BEAUTIFUL!)
*DO* *NOT* *MISS* the "AFTER VIDEO” in which I show 14 of the VERY BEST OPAL CABOCHONS that I own - BEFORE they are sent to my jeweler, who is preparing settings to put them in.
I know you won’t read this, but if you do insiders in Pulitzer Opal community believe that this is the very best video that I have done so far.
Colonel Pulitzer
Diamond lapidary wheels:
Company name: Baltic Abrasive Technologies.
www.baltic-abrasives.com
E-shop: www.lapidarywheels.com
The stone weighed approximately 4800 carats initially. In the video, I tumble and grind the huge rough opal, then treat it with concentrated sugar, then concentrated sulfuric acid, which was successful in that it turned the background black! (Andamooka matrix opal treatment success is judged by how well the sugar and acid penetrate into the stone.) Sulfuric acid reduces sugar molecules to pure carbon, which is black.
Matrix opal is normally light tan to white in color and the "fire" is difficult to see. With treatment (if successful), the background becomes black, and the enhanced contrast makes the color is easy to see.
The quality of matrix opal can only be judged AFTER it has been treated (if the opal has minimal visible play of color in the untreated state). Such untreated opal has no real value for jewelry because its color is imperceptible. Treatment is therefore necessary.
*Safety* is an important aspect of working with concentrated acid of any kind. Hazardous material gear is absolutely necessary. Clothing must cover all exposed parts of the body and a hazardous material respirator that is rated to handle acid is necessary. Eye protection is imperative and a respirator mask with face shield may be best.
In the video, I treat the stone to identify the color, then I sliced parts off to be made into cabochons. Gemstone cabochons, for jewelry. Smaller pieces were used to make two small arrowheads, which are beautiful. Cabochons, arrowheads and opal flakes are being given away.Concentrated acid must be disposed of in the manner required by law in your location. You may contact your local authorities to get the requirements and directions in this regard.
We thank nicethingspro for the use of their excellent parody video "That's Not A Comb"
Diamond lapidary wheels:
Company name: Baltic Abrasive Technologies.
www.baltic-abrasives.com
E-shop: www.lapidarywheels.com
Diamond lapidary wheels:
Company name: Baltic Abrasive Technologies.
www.baltic-abrasives.com
E-shop: www.lapidarywheels.com
Table of Contents:
00:12 – Black Opal rough
00:30 – Warning!
01:19 – Black opal from ASO opals
02:22 – Sheila appears
03:35 – Hopper the kitten
04:30 – Cutting Black opal
04:52 - Lightning Ridge light seam opal from Riley Gunn
06:24 – Slicing seam opal
07:24 – Zuck the Robot
08:30 – Cutting light opal
09:27 – Zuck goes wild
09:55 – Using flat lap on bottom of cabochon
10:48 – Final Stones
11:41 – Giveaway winners
12:00 – New Giveaway
Baltic Abrasive Technologies
Phone: +37060852282
www.baltic-abrasives.com
Diamond lapidary wheels:
Company name: Baltic Abrasive Technologies.
www.baltic-abrasives.com
E-shop: www.lapidarywheels.com
Diamond lapidary wheels:
Company name: Baltic Abrasive Technologies.
www.baltic-abrasives.com
E-shop: www.lapidarywheels.com
Table of Contents
01:27 - How to Start Grinding with Seam Opal
03:19 - Exposing the front side.
07:08 - Shaping Opal Cabochon
07:32 - Sanding and Polishing
08:10 - Grinding Opal as a Blank for Knapping
08:48 - Knapping an Arrowhead
09:51 - The Final knapped projectile point
10:00 - The Final Opal Cabochon
10:44 - Giveaway Winners announced
11:14 - New Giveaway Rules
A 7 1/2 ounce parcel of seam opal from Mintabie, South Australia was the starting material. I show how I cut one large piece from that parcel to make the 83 carat opal cabochon in 2014, then I re-cut that stone in 2021 to make a fantastic new cabochon, one of the finest that I have ever seen.
I also pan for gold at the end of the video
Black Opal Provided by:
Adam Sawicki, ASO Opals
Contact: Text: 518-331-6146
email: aandsopals@gmail.com
DO NOT SHOP FOR OPAL ON HIS WEBSITE, BECAUSE IT HAS NOT BEEN RECENTLY UPDATED,
He prefers email and text messages!
(See end of video for details)
Table of Contents
00:23 - Showing Black Opal
00:45 - Cutting Black Opal
02:23 - Sheila 1st appearance
02:29 - Carving surface of Black Opal
03:26 - Cutting Black opal
04:00 - Shaping Final Black Opal
04:31 - Diamond and Opal Ring Stone Replacement
05:40 - Shaping Crystal Opal Ring Stone
06:19 - Putting Dome on Crystal Opal Ring Stone
06:37 - Final Crystal Opal Ring
06:47 - Final Black Opal Stone
07:14 - Out-takes: Public Service Announcement
11:22 - Giveaway Winner
11:43 - New Giveaway Items
Table of Contents 00:23 – Opal from blast 00:37 – Information about Riley Gunn, Opal seller 01:31 – Slicing opals in half 02:08 – Slicing King Stone in half 02:32 – Opal Cutting (grinding and polishing) 02:51 – Cutting 1st large opal from King Stone 04:45 – Cutting MAIN opal of King Stone 06:19 – Using OPAL CUTTING MACHINE 08:08 – Polishing king stone 08:13 – FINAL Cabochons 09:33 – Giveaway winners 09:49 – New Giveaway: Opal ARROWHEAD
Opal for this video Supplied by:
Adam Sawicki, ASO Opals
Contact: Text: 518-331-6146
email: aandsopals@gmail.com
ASO is at all major and many smaller gem shows
Supplier of Lightning Ridge Black Opal
Sells Rough and cut opal
See end of video for details
Table of Contents
00:00:22 Unboxing Black Opal
00:00:56 Parcels of Black Opal
00:01:03 Rough Black Opal #1
00:01:39 Rough Black Opal #2
00:02:41 Making Arrowhead
00:03:30 Rough Opal #3
00:04:01 Precious Opal
00:04:30 Cutting Opal #3
00:07:20 Details of cutting a concave opal
00:07:46 Final Stones
00:09:15 Giveaway Winners
00:09:34 New Giveaways
The opal is from Mintabie, SA, Australia. In the video, two Ethiopian opal stones from my last video are given away and two more opals are presented from giveaway in this video!
Table of Contents
00:00:15 – Black Mintabie rough opal parcel
00:00:28 – Examining seam opal
00:00:47 – Exposing the edges
01:00:00 – Viewing edges of seam opal
00:01:27 – Exposing top and bottom of stone
00:02:25 – Viewing top and bottom of stone
00:03:25 – Fully exposed stone
00:05:25 – Ready for shaping
00:06:15 – “Designing” a setting
00:06:45 – Final shaping
00:07:09 – Outtakes
00:08:15 – Opal News ??
00:10:41 – FINAL STONE
00:11:20 – Giveaway winners
00:11:36 – New Giveaway stones
00:11:56 – How to enter Giveaway
Table of contents
00:33 - Cutting Honeycomb candidate dry
01:01 - Australian vs Ethiopian opal
01:52 - Opal patterns and "Order"
02:16 - Harlequin Opal
03:19 - What to look for to find Honeycomb pattern
04:25 - Continued cutting of Honeycomb dry
05:12 - What Honeycomb pattern IS
05:52 - Polished Honeycomb after cutting dry
06:38 - Outtakes / Rant
09:02 - Colonel of ????
10:19 - Kingstone that didn't make it!
11:13 - Giveaway winners from Cross-cutting video
11:35 - New Giveaway opals
Techniques of grinding and polishing are discussed.
Jewelry will be the destination for both stones!
Table of Contents
00:36 – Layers of opal
00:58 – Side view of opal
01:06 – CROSS-CUTTING
01:18 – Rainbow shield side view
02:46 – KING STONE
03:33 – Mintabie for Cross Cutting
04:33 – Coober Pedy for Cross Cutting
05:07– Slicing Coober Pedy
06:27 – Grinding Mintabie Striped Opal
07:49 – Making a cabochon - Coober Pedy
09:30 – Cutting Mintabie Cabochon
11:30 – Rant
14:57 – 2 Giveaway Opals
Also in this video, I show how to take Ethiopian opal that is wet and go through a newly discovered drying technique that allows it to be dried within 12 to 16 hours, rather than 2 to 6 days as it usually is.
This is a revision of the previous video. New information about drying Welo opal is important for viewers to know as some methods will ruin the opal.
The tests involve using Ultraviolet light to determine fluorescence and phosphorescence and the lick or finger test to test whether you are dealing with hydrophane (water-absorbing opal).
An unboxing of these items is presented Beads from Coober Pedy, Mintabie, Lambina, Queensland and Andamooka are looked at. In addition, Lightning ridge opal is a possible type of opal for the opal bead industry. Opals were mined across the world, in Australia, Ethiopia (Welo), Brazil, Mexico and others. I take opal chips from many areas tumble polish them, drill holes and make an opal bead necklace. In addition, a 13 carat rough opal, a mystery stone is cut, ground and polished and there is a quiz challenging viewers to guess where the opal comes from.
Table of Contents
00:13 – Unboxing opal
00:34 – Mystery rough opal
01:42 – Inspecting opal bead necklaces
02:44 – Mystery opal cutting begins
03:06 – Making opal beads – cleaning the chips
03:23 – Tumbling opal beads with vibratory tumbler
03:59 – Drilling holes in opal beads
04:40 – Tumbling opal beads (polishing)
05:10 – Grinding mystery opal
06:25 – Stringing opal beads
06:28 – Finishing the mystery opal
06:42 – Paco enters
07:08 – Opal bead necklace finished
07:27 – Outtakes
08:08 – Rant #1
09:15 – Rant #2
12:28 – Mystery opal revealed
13:25 – Upcoming videos
13:46 – Giveaway opal
Table of Contents
00:32 – Welo Opal Water Absorption
00:58 – How to Store Ethiopian Welo Opal
01:10 – Comparison to Australian Opal
01:40 – “Working Rough” Ethiopian Welo Opal
02:06 – Cutting Welo Opal Wet #1
02:40 – Dealing with Cracks While Cutting Welo Opal
03:54 – Cutting Welo Opal Dry
04:50 – Giveaway Stone
04:59 – Cutting Welo Opal Wet #2
05:34 – What Ethiopian Opal Rough Looks Like
06:08 – Grading Ethiopian Opal and Prices
06:32 – Stress Cracking of Welo Opal
07:36 – How Some Welo Opal Cracks During Cutting
08:03 – Rubik Cube World Record Broken
09:11 – Rant About Sheila, My Assistant
11:44 – Sponsors of this Video
12:25 – Winners of Giveaways (3 Giveaways!)
13:03 – How to Enter New Giveaway
Opal for this video was provided by:
EthiopiaOpals.com
Facebook: EthiopiaOpals
Instagram: EthiopiaOpals
Email: EthiopiaOpals@yahoo.com (preferred contact method)
(Jon Young)
VillageSmithyOpals.com
(Steve Newstrom)
Instagram: ApexOpals
(Ernest Alaffita)
Opal gemstones
Table of Contents
00:00 - Start
00:15 - Black Opal Rub
00:47 - Black Opal - Defect on Edge
01:19 – Crystal Opal Specimen
02:30 – Plan For Black Opal
02:40 – Plan for Crystal Opal
03:00 – Cutting Black Opal Start
03:43 – Cutting Crystal Opal
05:39 - The Spot
06:16 – Final Cabochon Black Opal
06:34 – Final Cabochon Crystal Opal
07:48 – Outtakes!
08:05 – “Influencer”
09:47 – Mindless Rant
11:54 – Opal Arrowhead King
12:29 – Opalholics Anonymous
13:13 – New Giveaway
13:27 – Rainbow Matrix Cabochon Winner
opalauctions.com/stores/53frogs
Table of Contents
00:00 Opal "Concrete"
01:17 Riley Hits the Curb
01:54 Sheila!
02:22 Opal into Acid
04:01 Cutting pieces for cabochons
04:44 Cutting the FROG SHIELD
05:45 Cutting more pieces off of the CHUNK
06:05 Making cabochons
06:38 Final cabochons
07:34 Outtakes
07:40 Paco Flying
08:00 Never put acid in coffee
08:35 What you can call me
13:07 Giveaway details
13:27 Winner of Man on Fire Opal
*** CHECK OUT ---- JUSTIN Y ! youtube.com/user/jeyoung624
Table of Contents
00:00 – Start of video
00:51 – Cracking problem Ethiopian opal
01:18 – Don’t use Opticon 224
01:37 – Why Ethiopian opal is porous
02:14 – Effects of Opticon on Ethiopian opal
02:32 – Stone #1
03:13 – Stone #2
03:50 – Stone #3
04:25 – Stone #4
06:06 – Stone #5
07:00 – Comparing #4 and #5 stones
07:56 – Flaws are OK
08:20 – Outtakes (Best Part!)
09:35 – Paco the Kitten
09:47 – GIVEAWAY stone
10:29 – Giveaway Rules
10:39 – WINNER of Giveaway From “Opal Cannonball” video
Next, portions of the stone were sliced with a lapidary trim saw and made into cabochons. The polished cabochons were then treated with sugar and sulfuric acid. Some of the stones will be used in jewelry by making gold settings for them.
Matrix Opal Supplied by
Riley Gunn of nnOpals:
opalauctions.com/stores/53frogs
Table of Contents:
00:00 Showing the Opal Cannonball
00:17 Grinding
00:40 Tumbling
01:34 Hand Smoothing
01:56 Polishing Finished
02:08 Treatment of Matrix
03:25 Polished, Treated Cannonball Matrix
04:04 Cutting Part of Cannonball off
05:21 Cutting and Polishing Best Cabochon
05:52 Showing All Cabochons
10:16 Outtakes
12:36 Sheila
13:21 Giveaway Rules
I hope that you enjoy the video and my other videos that cover rough Australian opal, Ethiopian opal, Mexican opal, Brazilian opal, Australian boulder opal, Andamooka matrix opal and others. I also do videos on lapidary, including agate, jasper and many other stones.
I recommend the the videos of Rookie Rockhounding:
youtube.com/channel/UCvl86XFshpCzzQjWqyi15sQ
Table of Contents
00:00 – Start of video
00:23 – Original rough opal
00:58 – Start of Cutting
01:32 – Sides of stone revealed
02:50 – Grinding the back
03:19 – Grinding the front
04:24 – Evaluating the progress and problems
05:40 – Sanding and shaping
06:06 – Polishing
06:26 – Final Stone
06:51 – Outtakes – The Best Part!
10:24 – Final comments!
TABLE OF CONTENTS
00:00 - Start of Video
00:06 - Andamooka Matrix Opal
01:21 - Rocky Mountain Opal (Virgin Valley; Spencer, Idaho)
02:16 - Australian White Opal
03:20 - Ethiopian Welo Opal
04:39 - Mexican Fire Opal
05:35 - Australian Semi-Crystal Opal
06:02 - Brazilian Opal
06:37 - Australian Crystal Opal
07:21 - Australian Boulder Opal
08:07 - Lightning Ridge Black Opal
09:12 - Precious vs. Common Opal
09:40 - White vs. Crystal Opal
10:21 - Outtakes
12:26 – Message from Pulitzer Opal
TABLE OF CONTENTS
0:00 – What is a Rockhound? 0:38 – Rocks I Have Known 1:20 – Giveaway Announced 2:08 – What is Jasper 2:54 – Difference Between Jasper and Agate 4:14 – One Rock, One Location 5:54 – Where Picture Jasper Found 6:26 – Unsafe Activities in PANDEMIC 7:49 – Where to BUY Picture Jasper 8:13 – CUTTING JASPER CABOCHON8:59 – GIVEAWAY Details10:09 – Hans Gamma, Jasper Authority 10:34 – Buy HIS BOOK 10:44 – Sheila –AGAIN! 11:20 – Subscribe and Closing
TABLE OF CONTENTS
0:00 – 82 carat Opalized Clam UNCUT
0:53 – BREAKING OPAL NEWS! Opal Engagement Ring
1:43 – Close Examination of Uncut Opal
2:36 – Cutting and Grinding begins
3:06 – BREAKING OPAL NEWS! Opal Discovered on MARS!
3:37 – Revealing the Color Bars!
5:08 – 1st Color Bar Fully Exposed
6:12 – BREAKING OPAL NEWS! Complete OPAL DINOSAUR Found!
8:12 – Sawing Between the Color Bars
8:28 – BREAKING OPAL NEWS! Opal Month Arrives!
8:42 – Exposing the MONEY Color Bar!
9:52 – FINAL STONE Revealed
The “secret” technique for removing treatment effect of Andamooka matrix opal is revealed: chlorine bleach! This technique works very well when the bleach is heated, but I also how it is easy to remove too much treatment effect, if the temperature is too high. Bleach will remain in the decolorized matrix and needs to be removed, or subsequent treatment will not work well. Bleach treatment can be neutralized by using chemicals, such as sodium metabisulfite or ascorbic acid (Vitamin C).
I show HOW TO SPOT PREVIOUSLY TREATED Andamooka matrix opal! DARK SPOTS on "untreated" matrix indicate that it HAS BEEN PREVIOUSLY BLEACHED. I give evidence that the bleaching technique has probably been used for many years, but is not generally known.
TABLE OF CONTENTS
0:00 – Introduction to New Amazing Breakthrough
0:36 – Bad Results of Treatment in Previous Video
0:57 – Another Amazing Breakthrough??
1:27 – Is Matrix Opal Worth More Untreated?
1:59 – Breakthrough! How to Remove Treatment of Matrix
2:20 – Sheila Talks!
3:04 – Men Are Stupid!
3:40 – What Did Sheila Do???
5:09 – Original Discovery of Bleach!
6:52 – Experiment to Remove Treatment
7:31 – Fast Results with Bleach Treatment Removal!
9:07 – What to Look for When Buying Matrix Opal
10:23 –Don't Be SCAMMED! Which Matrix Opal to NOT BUY!
11:41 – Upcoming Videos12:30 – Ending: Subscribe or Else!
In the video, I take two blocks of white, virtually colorless matrix opal, cut it into ovals and grind it into two domed cabochons. After that, the stones are placed in hot sugar solution, then into hot sulfuric acid. The result are two spectacular black matrix opal gems cut into beautiful black gemstone cabochons to be used in jewelry. I discuss most of the important aspects of treating Andamooka matrix opal, including the fact that there is considerable variability. Occasionally, all or parts of the stone may not "treat" well, as they fail to turn black. Several examples are displayed.
Special thanks to Riley Gunn, who supplied the opal: opalauctions.com/stores/53frogs.
TABLE OF CONTENTS:
0:00 - Video previews
0:27 – White Blocks of Andamooka Matrix Opal
01:01 – Revealing Color in Untreated Stones
01:58 - Variability of Results After Treatment
02:44 – Start of Cabochon Making
04:14 - Trimming and Shaping Cabochons
04:27 – How To Connect Cabochon to Dop Stick
06:12 – Grinding Opal Cabochons
06:58 – Treatment of Matrix Opal
09:12 - Results of Treatment
10:57 - Polishing Matrix Opal Cabochons
11:22 - Reviewing the Final Results
The second part of the video consists of cutting and polishing the rough opal with a lapidary machine using progressively finer grits. Grinding proceeds very carefully because the color is in thin layers and one can easily destroy them by cutting quickly or grinding with too much force. In the end, a beautiful black opal cabochon for jewelry is created.
Special thanks to Riley Gunn, who supplied the opal: opalauctions.com/stores/53frogs
TABLE OF CONTENTS:
0:00 - Lightning Ridge Black Opal
0:49 – Price per Carat
01:55 – Why Lightning Ridge ROUGH is Rare
03:26 - What I Think of Black Opal Direct
04:31 – Why Is Lightning Ridge Black Opal the Best?
05:35 - Where to Buy
07:21 – Cutting and Grinding
08:24 – Color Exposed
09:31 – Fine Grinding Opal Supplied by Riley Gunn of nnOpals.com
Opal Supplied by Riley Gunn of nnOpals.com
YouTube: youtube.com/user/captainshift
OPAL AUCTIONS: opalauctions.com/stores/53frogs


