Myfordboy helps by Silver Soldering the Ellie Steam Tram Boiler. Nobbys Workshop 2026-01-17 | My good friend David Abbott, aka Myfordboy kindly offered to silver solder the boiler on my Ellie Steam Tram. @myfordboy @MrFactotum
Ellie Oscillating Engine Test Run. Nobbys Workshop 2026-09-27 | Engine assembled with gears fitted and tested.
Face Mill insert accuracy test. Nobbys Workshop 2026-09-20 | Measuring insert height and adjustment,and test cut.
Fountain Pen Cartridge Piercing Removal Tool. Nobbys Workshop 2026-09-17 | Making this special tool for Mrs Nobby.
V-Blocks for my Fixture/Tooling Plate. Nobbys Workshop 2026-09-13 | Making some small V-Blocks to use on my fixture plate.
Myford Lathe Spindle Driving Handle. Nobbys Workshop 2026-09-02 | How to my your own version. These are available from Myford Lathes at £69.50See this version on this YT channel @SteveJordan
Safety Valve for Ellie Steam Tram Nobbys Workshop 2026-08-30 | Part 29 of the Ellie Steam Tram build.
Face Milling Cutter. Nobbys Workshop 2026-08-27 | Improved inserts for aluminium. Type APGT 1604 PBFR - G2 - MA H01
Lathe Shear Tool. Nobbys Workshop 2026-08-23 | Shear tool test on copper. @chrisstephens6673 @SteveJordan @mrpete222 Diamond tool made by -@daveticehurst4191
Ellie Steam Tram - Part 28 - Machining the Piston. Nobbys Workshop 2026-08-16 | Piston and piston ring.
Fixture/Tooling Plate Pivot Clamps. Nobbys Workshop 2026-08-12 | Some extra details on how the clamps were made. @deezworkshop @joepie221
Ellie Steam Tram - Part 27 - Drilling and Reaming the Cylinder Bore. Nobbys Workshop 2026-08-09 | The cylinder bore and end cap.
Ellie’s Buffer Beams - A little bit of extra detail. Nobbys Workshop 2026-08-07 | Just adding some extra detailing to the Buffer Beams.
Ellie Steam Tram - Part 26 - Machining the Cylinder. Nobbys Workshop 2026-08-02 | Work on the lathe and milling machine.
Tramming the Mini Mill. Nobbys Workshop 2026-07-26 | One of those jobs that’s always a challenge, but hopefully not any more. Do take a look at this channel @daveticehurst4191
Another Workshop Sticker Exchange. Nobbys Workshop 2026-07-24 | Sticker exchange with The Weekend Shedhead. @WeekendShedHead
Ellie Steam Tram - Part 25 - Engine Build P3. Nobbys Workshop 2026-07-19 | Further work on the engine.
A new Workshop Sticker Exchange. Nobbys Workshop 2026-07-16 | A sticker exchange with Modelling Mark. Do take a look at his YouTube channel. @modellingmark
Ellie Steam Tram - Part 24 - Engine Build P2. Nobbys Workshop 2026-07-05 | Continuing the engine frame build.
4th Anniversary of my YouTube Channel and a New Workshop Sticker. Nobbys Workshop 2026-07-04 | Celebrating 4 years on YouTube. 2061 Subscribers and 214 Videos.Please take a look and subscribe to Tea and Biscuits channel@tandb
Ellie Steam Tram - Part 23 - Wheels and Engine Build. Nobbys Workshop 2026-06-28 | Explaining about the wheels and updates. @daveticehurst4191 @myfordboy
Ellie Steam Tram - Part 22 - Making the Cranks. Nobbys Workshop 2026-06-21 | Some machining and hand filling.
Ellie Steam Tram - Part 21 - Connecting Rods. Nobbys Workshop 2026-06-14 | Interesting machining job.
Fixture/Tooling Plate and new Workshop Sticker. Nobbys Workshop 2026-06-07 | Making a second Fixture Plate. @deezworkshop @StuartsShed
Ellie Steam Tram - Part 20 - Mounting the Chassis on the Footplate. Nobbys Workshop 2026-05-31 | Drilling holes in aluminium angle and transferring and tapping holes.
Ellie Steam Tram - Part 19 - Axle Bearings and Chassis. Nobbys Workshop 2026-05-24 | Some lathe, bench drill and thread tapping jig work.
Old Starrett Micrometer Restoration. Nobbys Workshop 2026-05-17 | Cleaning and calibrating two micrometers and using Nob-O-Rust Formula.
Ellie Steam Tram - Part 18 - Test mounting the boiler and burner. Nobbys Workshop 2026-05-10 | setup to drill holes in the Ellie footplate.
Ellie Steam Tram - Part 17 - Building the Chassis Frame. Nobbys Workshop 2026-03-29 | Drilling various holes in the chassis frame for the axel bearings etc.
Ellie Steam Tram - Part 16 - Soldering the Burner. Nobbys Workshop 2026-03-22 | Trying out different methods of soldering. People who helped with advice…..@daveticehurst4191 @myfordboy
Ellie Project Update and Some Exciting News. Nobbys Workshop 2026-03-15 | Project update, New Subscribers and a Workshop Gift.Take a look and support the channels below…….@daveticehurst4191 @HaxbyShed @eccentricengineer
Ellie Steam Tram - Part 15 - Burner end caps and fittings. Nobbys Workshop 2026-03-08 | Flattening some copper and machining the fuel tank fittings.
Ellie Steam Tram - Part 14 - Drilling holes in the Copper Tube. Nobbys Workshop 2026-03-01 | More forming work and drilling holes.
Ellie Steam Tram - Part 13 - Annealing and Forming the Copper Tube. Nobbys Workshop 2026-02-22 | Forming the fuel tank for the burner from round copper pipe. @myfordboy @daveticehurst4191
Magnetic Chuck for the Milling Machine. Nobbys Workshop 2026-02-15 | A new useful tool for the workshop.
Ellie Steam Tram - Part 12 - Remaking the Burner. Nobbys Workshop 2026-02-01 | A different approach to making the fuel tank. @myfordboy
Nobby’s Workshop Recap for 2025 Nobbys Workshop 2026-01-25 | A look at what I did in my workshop in 2025 and some new tools added. @daveticehurst4191 @myfordboy
A Small Myford Lathe Job & Workbench Repair. Nobbys Workshop 2025-12-21 | My last video before Christmas.
Moore and Wright 0 to 1/2” Micrometer. Nobbys Workshop 2025-11-16 | A new micrometer for the Workshop.
Ball Turning on the Myford Lathe. Nobbys Workshop 2025-11-09 | Making a replacement knob for the Myford back gear lever. @daveticehurst4191
Myford Collet Chuck Testing. Nobbys Workshop 2025-11-02 | Testing my new ER25 collet chuck and collets.
Midlands Model Engineering Exhibition 2025. Nobbys Workshop 2025-10-19 | Visit to the exhibition and tool finds. The castings for the Essex Engine on the Stirling Society stand are available from Myfordboy@myfordboy
Mini Milling Machine - Fixing a problem. Nobbys Workshop 2025-10-12 | Modifications to the motor pulley.
Lawn Mower Club Rally & Tool Haul. Nobbys Workshop 2025-10-05 | Our visit to our local museum and Lawn Mower Club Rally.
Myford Lathe Sensitive Drill Chuck. Nobbys Workshop 2025-09-21 | Tailstock tap and die holder and sensitive drill chuck. Sensitive drill chuck made by….@daveticehurst4191
