Sound Waves from Shadows with this Soldering Kit scanlime 2018-07-20 | Is there a synthesizer in your LED, or a song in the shadows? Are your lights quiet or do they roar? This surface mount soldering kit from Boldport and Rare Waves will help you hear the audio-frequency signals that hitch a ride on any light source, whether it's modulated LEDs or the shadow of fluttering leaves.scanlime035 - Lite2Sound BCThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeMore info about the kit:boldport.com/products/lite2sound-bcIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Pen Wiggler scanlime 2021-05-10 | It's a vibrating robot that draws using closed loop feedback. This video was made possible by my patrons, [patreon.com/scanlime] Project files: github.com/scanlime/wiggler
Terrible Button scanlime 2021-03-06 | Teardown for the Ring doorbell camera. It's not good.Thank you to my supporters at patreon.com/scanlime for making this series possible!
Active Stylus Teardown scanlime 2021-02-20 | What's inside this "active stylus" and how does it work? No spoilers ;)Thanks to my patrons for making these videos possible.
Sewing Servo Mess scanlime 2021-02-12 | Finally debugging an old project. It's a mess but we can work with this.Thank you to my supporters who make these vids possible, patreon.com/scanlime
Four Buttons scanlime 2021-01-30 | In which one button gets four stylish buddies, via forward and reverse engineering.Thanks to my patrons for their continued support.More video: https://diode.zone/accounts/scanlime/video-channels
Streaming on the wrong channel scanlime 2020-03-30 | The live streams are MOVING to youtube.com/channel/UC8G48_G7suQlScUudVXyGkgStreaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Perler Bead Shaker with a 3D Printer from 2010 scanlime 2019-05-19 | Briefly looking back at an old project where I tried to push the capabilities of the first 3D printer I had, the Makerbot Thing-o-Matic designed in late 2010. This project from 2011 was intended to be a full printer or sort and place machine for fusible "Perler" style plastic art beads. I got as far as designing a vibrating funnel, hopper, and part of a color sorting mechanism. scanlime050 - Perler Bead ShakerThe old Perler Bead Robot project is still on Thingiverse:thingiverse.com/thing:7332And perhaps more useful is the library for making 2D springs in the same style:thingiverse.com/thing:5713Thank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Running with Tuco the Cat in 4K scanlime 2019-05-07 | Running and playing fetch with my cat and best friend, Tuco, with lots of close-up petting in 4K πΈ Tuco is a polydactyl cat, half American Curl and half Bengal. He likes to overclock his cat wheel and hunt bouncing nylon bolts.Featuring Long Winter by @nop (c) copyright 2016 Licensed under a Creative Commons Attribution Noncommercial (3.0) license. http://dig.ccmixter.org/files/Lancefield/53804On Diode Zone (PeerTube) at https://diode.zone/videos/watch/e4fabcb2-6b7e-4566-819c-96b93b8cc314 and YouTube at youtu.be/oniuTAVB0u8If you enjoy hanging out with Tuco, he features in many of the electronics videos on scanlime.orgThanks for watching, sharing, and subscribing!
iCEBreaker breaks the ice with open source FPGA tools scanlime 2019-02-07 | Today's video is about a package sent in by 1BitSquared with a prototype FPGA board. These boards are part of a new generation of open hardware which builds on a foundation of open source FPGA tools. At the time we streamed this live, the crowdfunding campaign was about to launch. It's been successfully funded, and at this time you can pre-order boards from the next batch. scanlime049 - iCEBreaker FPGA Quick LookThe iCEBreaker page is on Crowd Supply:crowdsupply.com/1bitsquared/icebreaker-fpgaThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Icestudio and Verilog project, LED Matrix FPGA driver! Part 4 scanlime 2019-02-06 | In the fourth and final part of our HUB75-style display driver series, we make a cool demo in gateware using the modular driver! In this segment we'll add a frame buffer and implement a video feedback plus munching squares effect in Verilog and Icestudio.scanlime048 - Icestudio LED Matrix Driver Part 4The Icestudio editor and the entire build toolchain are free and open source software!github.com/FPGAwars/icestudioThe FPGA board and adapter PMOD are part of the iCEBreaker CrowdSupply campaign, which was successfully funded! This is a great little FPGA dev board, and a platform designed to help more people get started with FPGAs using open source tools.crowdsupply.com/1bitsquared/icebreaker-fpgaThis project is available on Github:github.com/scanlime/icebreaker-icestudio-ledmatrixThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Icestudio and Verilog project, LED Matrix FPGA driver! Part 3 scanlime 2019-02-06 | In the third part of our HUB75-style display driver in Verilog and Icestudio, we start looking at demoscene-style effects to implement next, and implement a gamma correction and dithering module to improve color quality.scanlime047 - Icestudio LED Matrix Driver Part 3The Icestudio editor and the entire build toolchain are free and open source software!github.com/FPGAwars/icestudioThe FPGA board and adapter PMOD are part of the iCEBreaker CrowdSupply campaign, which was successfully funded! This is a great little FPGA dev board, and a platform designed to help more people get started with FPGAs using open source tools.crowdsupply.com/1bitsquared/icebreaker-fpgaThis project is available on Github:github.com/scanlime/icebreaker-icestudio-ledmatrixThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Icestudio and Verilog project, LED Matrix FPGA driver! Part 2 scanlime 2019-02-06 | In this second part of the HUB75-style display driver in Verilog and Icestudio, we'll debug and reorganize the existing gateware into something modular that we can build upon, with nice and stable Binary Code Modulation for brightness control.scanlime046 - Icestudio LED Matrix Driver Part 2The Icestudio editor and the entire build toolchain are free and open source software!github.com/FPGAwars/icestudioThe FPGA board and adapter PMOD are part of the iCEBreaker CrowdSupply campaign, which was successfully funded! This is a great little FPGA dev board, and a platform designed to help more people get started with FPGAs using open source tools.crowdsupply.com/1bitsquared/icebreaker-fpgaThis project is available on Github:github.com/scanlime/icebreaker-icestudio-ledmatrixThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Icestudio and Verilog project, LED Matrix FPGA driver! Part 1 scanlime 2019-02-05 | In this project we'll be programming up some FPGA "gateware" using the visual Icestudio environment and the industry standard Verilog language, in order to display full color images on an inexpensive HUB75E-style LED video wall panel.This first video focuses on project bringup and just getting *something* on the screen, even if it's a bit buggy!scanlime045 - Icestudio LED Matrix Driver Part 1The Icestudio editor and the entire build toolchain are free and open source software!github.com/FPGAwars/icestudioThe FPGA board and adapter PMOD are part of the iCEBreaker CrowdSupply campaign, which was successfully funded! This is a great little FPGA dev board, and a platform designed to help more people get started with FPGAs using open source tools.crowdsupply.com/1bitsquared/icebreaker-fpgaThis project is available on Github:github.com/scanlime/icebreaker-icestudio-ledmatrixThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
What is an FPGA? Quick Answer scanlime 2019-02-05 | We're doing some projects now with FPGAs, but first what even is that? This is a quick answer, compiled from the unscripted explanations I would give live.scanlime044 - FPGA Quick AnswerThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
What is Diode Zone? scanlime 2019-02-04 | What is Diode Zone? https://diode.zoneIt's a video site, a PeerTube instance, a friendly place you can post videos, and you can find out more in this collection of unscripted explanations from earlier live streams.scanlime043 - Diode ZoneThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
New Isopod Colony / Zebra Pillbug BABIES! scanlime 2019-02-03 | You can hang out with the new isopod colony live at https://live.diode.zone/eyesopod, or check out time lapse recordings at https://diode.zone/video-channels/eyesopod/videosThe microscope mount is free on Thingiverse (thingiverse.com/thing:3365969) or Github (github.com/scanlime/um016-microscope-right-angle)scanlime042 - New Isopod ColonyThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeFor an alternative to youtube and twitch, check out https://diode.zoneIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Pineapple Slime Oscillator ππ¦ π¬ scanlime 2018-11-21 | Assemble the Boldport Ananas with me, in a trippy music video full of fluorescent goo and disco ball motors! This is a fun electronics kit that calmly pulses its yellow LEDs with a set of transistorized ring oscillators.scanlime041 - Pineapple Slime OscillatorThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeFind out more about Ananas here:boldport.com/products/ananasIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Manufacturing Test Fixture for bike lights? Teardown and Quick Look scanlime 2018-08-14 | I found these two test jigs for sale at a local business that was relocating. They would have been used as part of the quality assurance procedure for smart bike lights. Later we might go into more detail on the firmware, or repurpose the formidable hunks of metal for another project!scanlime040 - Test Jig Quick LookThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
New Project Donations: Cameras and LEDs, USB 3 and pre-UNIX scanlime 2018-08-11 | In my live streams I've been inviting you to send me new reverse engineering projects at my P.O. box. In these videos, I'll introduce a few of the items I've been receiving, with a bit of the mystery preserved!scanlime039 - Unboxing Cameras and LEDs, USB 3 and pre-UNIXThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
New Project Donations: Bitcoin, Buttons, and ADB scanlime 2018-08-03 | In my live streams I've been inviting you to send me new reverse engineering projects at my P.O. box. In these videos, I'll introduce a few of the items I've been receiving, with a bit of the mystery preserved!scanlime038 - Unboxing Bitcoin, Buttons, and ADBThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Playing Fetch, this 1/4-20 bolt always has his attention (Tuco the Cat bonus content) scanlime 2018-07-28 | Just playing fetch. If you like tuco, check out my channel, he co-stars in the more serious videos there.
Heating Resistor Repair and Time Lapse: Orion Delta 3D Printer scanlime 2018-07-27 | These wire-wound resistors have seen better days, and my trusty Orion Delta printer from SeeMeCNC needs a replacement heater. More recent printer designs use cartridge heaters, but this'll be an oldschool repair with fresh resistors and silicone goop. After the repair, I'll do a test print with time lapse!scanlime037 - Squishy Resistor RepairThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeThis repair is following the instructional video from SeeMeCNC, available here:youtube.com/watch?v=SohKgQrSs3cIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Block Printing on Sticky Notes with a 3D Printed Jig scanlime 2018-07-25 | Some of you may know about a fancy CAD package used by a certain popular electronics rambler on utube, and I wanted a piece of that sweet handwritten design. Hanging with Tuco Crew one night, the tiger and I put this crack together. Milled linoleum printing block, 3D printed alignment jig, and as many copies of DaveCAD as we can eat.scanlime036 - DaveCAD Sticky PrinterThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon, where recurring donations make this content possible.patreon.com/scanlimeVector graphics source and the manufacturing files for this project are available in git:github.com/scanlime/davecadIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Tiny Reflow Oven Soldering Kit from Signal Ditch scanlime 2018-07-13 | This cute 3D soldering kit makes for a chill build video. The package comes our way as a crowdfunding reward, from pitching in to help Signal Ditch buy a reflow oven. Now we can all enjoy the sights and sounds of the build, but sadly I can't share the sweet epoxy fumes. (Please do not breathe the epoxy.)scanlime034 - Tiny Oven KitThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon and Liberapay, where recurring donations make this content possible.patreon.com/scanlime & liberapay.com/scanlimeSource code:github.com/SignalDitch/3D-Solder-Kit-Relow-OvenOur friends the Signal Ditch:http://www.signalditch.comIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
My very vocal American Curl / Bengal cat loves to fetch nylon bolts (Tuco the Cat bonus content) scanlime 2018-06-29 | His name is Tuco, and he likes many games but this is his favorite! If you like my cat, check out my channel... thereβs a lot more of him there!
My cat is amazingly good at fetching nylon bolts! (Tuco the Cat bonus content) scanlime 2018-06-26 | This is my cat Tuco. If you like him, check out my channel, thereβs a lot more cat video ^_^
Robot Odyssey (1984) Full Game Playthrough scanlime 2018-05-25 | Is this a YouTube first, a full play of the whole game? It's a classic that many have lost patience for, including my childhood self. It's like if Atari 2600 Adventure were full of digital logic puzzles. Let's do this, play through from start to finish, and test the new WebAssembly port I've been making!scanlime033 - Robot Odyssey Full Playthrough0:00 β Introduction3:44 β New game, entering LEVEL 1, The Sewer10:12 β Fishing for crystals21:57 β LEVEL 2, The Subway29:31 β Getting the first subway token32:47 β At the BART station48:50 β Getting another subway token1:00:29 β Getting the exit ticket1:05:39 β LEVEL 3, The Town1:17:34 β Elevator and vending machine1:25:35 β Small earthquake1:32:44 β HOW TO load saved chip files1:34:11 β In the lab, a closer look at the pulse counter1:40:30 β Using the vending machine to get an F-12 form1:43:47 β Arriving at the two button puzzle1:49:54 β Solution for the two button puzzle2:04:02 β Pressing the button in the next room2:05:59 β LEVEL 4, The Master Control Center2:25:06 β Starting the High Voltage Room puzzle2:32:18 β Solving the High Voltage Room2:39:15 β Force field tunnel: Early experiments3:13:33 β Do you need to know circuit symbols already? Nope! Quick trip to the tutorials.3:21:04 β Force field tunnel: Planning the return trip3:26:33 β In the lab, a closer look at how grabbers work4:06:22 β In the lab, making a "slow count-to-N" chip4:16:31 β Force field tunnel: Point of no return4:26:20 β Sending the key back4:28:58 β Minefield puzzle: Planning5:08:40 β Back to the lab, planning circuits for robot communication5:20:18 β In the lab, making a "CYCLER4" timing chip5:29:29 β Minefield puzzle: Building a communication circuit5:46:14 β First test run5:53:02 β Entering the minefield5:56:35 β Completed the minefield puzzle6:05:43 β Ventilation Shaft puzzle: Planning6:21:42 β Counting robot states7:01:06 β Completing the puzzle and releasing the master computer7:14:26 β LEVEL 5, The Skyways7:18:36 β Disk-O-Tek: What is this anyway?7:26:40 β Reading the manual7:45:42 β More misguided attempts to stop the Disk-O-Tek7:50:05 β In the lab, making a chip for the sonic key7:56:58 β Back to the Disk-O-Tek, still not doing it right8:10:00 β Actually solving the Disk-O-Tek8:14:28 β Sonic lock puzzle, using the chip from earlier8:17:18 β Hot wires puzzle8:49:40 β Solving the hot wires puzzle8:51:44 β Dark maze, stubbornly wandering around9:24:05 β Dark maze with pen and paper9:46:49 β Exiting from the dark maze9:51:09 β Turning on the lights in the dark maze9:55:29 β "Odd before even" four button puzzle10:26:50 β Gotta play with the cat10:40:19 β Fail. Don't linger on the buttons.10:58:33 β Solving the four button puzzle11:13:07 β Solving the grid puzzle with more bot communication11:21:48 β Transporter room puzzle12:42:40 β Back in the morning for more debugging13:07:12 β Escape from RobotropolisThank you so much for watching, subscribing, and sharing my videos. And a special thanks to my supporters on Patreon and Liberapay, where recurring donations make this content possible.patreon.com/scanlime & liberapay.com/scanlimeSource code for this port, Robot Odyssey Rewired:github.com/scanlime/robot-odyssey-rewiredIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
An Early View from the Tuco Flyer 3D Printed Camera Robot scanlime 2018-04-28 | scanlime032 - Early Flyer View.Tuco Flyer is actually flying now, so let's see what it can do! This is a high-level update on where the project is at and what the next steps are. And cat! Lots of Tuco the cat.This project is open source hardware and software, you can get the code and designs on GitHub:github.com/TucoFlyerMusic for this episode is "A Perceptible Shift" by Andy G. Cohen, licensed under CC BY 4.0http://freemusicarchive.org/music/Andy_G_Cohen/MUL__DIV_1198/Andy_G_Cohen_-_MULDIV_-_04_-_A_Perceptible_ShiftPlease consider supporting me on Patreon so I can keep making these vids!patreon.com/scanlimeI'm also trying out Liberapay as an alternative to Patreon, if you'd like to check that out instead:liberapay.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Zoom H2 teardown, with alkaline battery corrosion cleanup scanlime 2018-04-03 | scanlime031 - Zoom H2Just a quick video as I keep the equipment running: my Zoom H2 microphone was damaged thanks to some leaky batteries, but a brush and some Deoxit and isopropanol help me get it running again.Music for this episode is "Hot Drop Potato" by Jesse Spillane, licensed under CC BY 3.0jessespillane.bandcamp.com/track/hot-drop-potatoPlease consider supporting me on Patreon so I can keep making these vids!patreon.com/scanlimeI'm also trying out Liberapay as an alternative to Patreon, if you'd like to check that out instead:liberapay.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Why Reverse Engineer a Gimbal? scanlime 2018-03-24 | scanlime030 - Why Reverse a Gimbal?Why do all this gimbal reversing? It works so nicely now, and I didn't need to design the whole thing from scratch!Notes and tools are in GitHub:github.com/scanlime/fygimbalgithub.com/TucoFlyerMusic for this episode is "I Don't See the Branches, I See the Leaves" by Chris Zabriskie, licensed under CC BY 3.0chriszabriskie.bandcamp.com/track/i-dont-see-the-branches-i-see-the-leavesPlease consider supporting me on Patreon so I can keep making these vids!patreon.com/scanlimeI'm also trying out Liberapay as an alternative to Patreon, if you'd like to check that out instead:liberapay.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
Tsiny Gear-Motor Surprise, Manufacturing and Repair Fail scanlime 2018-03-22 | scanlime029 - Bad GearA winch gear split, taking a closer look and failing to repair it. How would you fix this nylon helical gear?Music for this episode is "γγ―γΌγγ€γ³γ" (Power Point) by Anonymous420, available under a CC0 1.0 Universal license.http://freemusicarchive.org/music/Anonymous420/Best_Of__Pick_Your_Player/Anonymous420_-_Best_Of_-_Pick_Your_Player_-_29_Please consider supporting me on Patreon so I can keep making these vids!patreon.com/scanlimeI'm also trying out Liberapay as an alternative to Patreon, if you'd like to check that out instead:liberapay.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopYou can find all of the source code and CAD models for this project on GitHub,github.com/TucoFlyerFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
4 Winches, 4 Minutes, relaxing DIY assembly #tucoflyer scanlime 2018-03-17 | scanlime028 - Four WinchesContinuing our Tuco Flyer robotic camera project, this montage covers the remaining electronics assembly and bot calibration to get our winches flying a 1.5kg spool around the shop!Music for this episode is "Something Elated" by Broke For Free, licensed under CC BY 3.0, remixed slightly.brokeforfree.bandcamp.com/track/something-elatedPlease consider supporting me on Patreon so I can keep making these vids!patreon.com/scanlimeI'm also trying out Liberapay as an alternative to Patreon, if you'd like to check that out instead:liberapay.com/scanlimeIf you'd like some of those cool scanlime stickers or Servo AF stream gear, check out the shop:redbubble.com/people/scanlime/shopYou can find all of the source code and CAD models for this project on GitHub,github.com/TucoFlyerFor previous episodes, check out the full scanlime playlist:youtube.com/playlist?list=PLhbhmdpDp9xF5LdSzsH1WJoOYdtZv-CC-Each episode is compiled together from many livestreams which you can hang out with on the companion scanlime-in-progress channel:youtube.com/channel/UC8G48_G7suQlScUudVXyGkgFollow twitter.com/scanlimelive for live streaming announcements.
LAST live stream on this channel, RFID mail, modulate a fish pump @scanlime-in-progress scanlime 2018-03-11 | The live streams are MOVING to youtube.com/channel/UC8G48_G7suQlScUudVXyGkgStreaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Live flickery LED bulb autopsy or repair, Hyperikon PAR38 @scanlime-in-progress scanlime 2018-03-09 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
LIVE FreeCAD newbie trying to make a Keyring Booth @scanlime-in-progress scanlime 2018-03-08 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Live IoT unboxing and review, BigClown Labs Open Source Hardware! @scanlime-in-progress scanlime 2018-03-07 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Live teardown of the worst mouse, 1998 Hockey Puck USB from Apple @scanlime-in-progress scanlime 2018-03-05 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Aura Interactor Virtual Reality Game Wear LIVE teardown... for art? @scanlime-in-progress scanlime 2018-03-04 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Friday night gains, Gimbal firmware in IDA again @scanlime-in-progress scanlime 2018-03-03 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Live C++ coding, adding features to the OBS plugin for Tuco Flyer @scanlime-in-progress scanlime 2018-03-01 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Live bot coding in Rust, new stateful gimbal controller @scanlime-in-progress scanlime 2018-02-27 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Live gimbal disassembly in IDA, further into the analog processing @scanlime-in-progress scanlime 2018-02-26 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Reverse engineering a gimbal motor calibration procedure, LIVE with IDA @scanlime-in-progress scanlime 2018-02-25 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Unboxing Keyboard.io, still in IDA looking at gimbal motor firmware @scanlime-in-progress scanlime 2018-02-24 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Tiny cat six, one little tiger, and gimbal firmware reversing continues @scanlime-in-progress scanlime 2018-02-23 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Re-leashing the flyer bot, more gimbal firmware reversing @scanlime-in-progress scanlime 2018-02-22 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Live gimbal reverse engineering continues, Understanding the motor buzz @scanlime-in-progress scanlime 2018-02-21 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Live gimbal IDA disassembly and debug, how does it roll? @scanlime-in-progress scanlime 2018-02-16 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
Looking into the gimbal roll bug, Bot lost the horizon @scanlime-in-progress scanlime 2018-02-15 | Streaming from the shop, while I work on upcoming videos about electronics and reverse engineering. Also cats. Like the show? Every bit helps, patreon.com/scanlimeπ¬ https://gitter.im/scanlime/live π’ twitter.com/scanlimeliveβ Finsished work at http://scanlime.org πΌ Archives at http://bit.ly/scanlime-in-progressStarring: πΊ twitter.com/tucothecat π twitter.com/scanlime π https://mastodon.social/@scanlime
