Spout Dispenser Build (From Washer and Dryer Stand Video) Glass Impressions 2026-09-20 | Spout Dispenser Build (From Washer and Dryer Stand Video)
Rippin through some 1/2” HDPE stock with 5hp Spindle on our ShopBot Tools CNC Router. Glass Impressions 2024-04-22 | ...
Making some ductwork support brackets on the ShopBot Tools CNC Router. 1/2” HDPE material. Glass Impressions 2024-04-20 | ...
Using our Shopbot 4x4 PRSApha CNC to cut out our kaizen foam for our STV Racking 6” drawers. Glass Impressions 2024-04-12 | ...
Quick Tour | ShopBot | PRS ALPHA | CNC ROUTER Glass Impressions 2024-02-19 | Check out our 4'x4' PRS Alpha CNC Router by Shopbot
We are coming back! | New Shop | 2024 Glass Impressions 2024-01-01 | We have worked very hard to make this possible! Our new 40' x 60' shop is under construction and should be ready sometime in the spring of 2024. Like and follow us on Youtube for future shop developments, buildouts, and projects! Also, follow our social media for snapshots and small video updates!instagram.com/andyglassimpressionsinstagram.com/stv_racking
STV Racking Assembly Video Glass Impressions 2022-11-10 | www.stvracking.comwww.instagram.com/stv_racking0:00 Disclaimer0:10 Intro0:46 Tower Assembly5:25 Tray Overview6:50 Drawer Slide Installation - Cabinet Member8:07 Drawer Slide Installation - Tray Member9:28 Torpedo Dock™ Installation11:25 Systainer Retention Latch Installation12:04 Shark-Loc Instllation14:43 Locking Adjustable Shelf (L.A.S.) Assembly/Installation17:16 Drawer Assembly21:39 Shark-Loc Drawer Installation
STV Racking Torpedo Dock Installation Template Demonstration. Glass Impressions 2022-05-07 | www.stvracking.com/shop
STV Racking Master Modeling File Instructional Video Glass Impressions 2022-03-24 | This video is to help you design and layout your STV Racking setup. Easily model your space (Shop, Trailer, Van) with real dimensions. Using the existing models in the file, you can easily create the STV Racking setup to fit that space. Grab the tool containers that you own or maybe are going to buy, plug them into the standard units provided or modify them to the height that you need. www.stvracking.com
STV Racking Packout Hand Truck Cable Kit Glass Impressions 2021-12-14 | The designers of the Milwaukee Packout Hand Truck did a pretty good job, but one thing they made a huge mistake on was the release mechanism for the front tongue. We humans only have two hands and find it very hard to lift the two red levers and the front tongue at the same time. STV Racking has a solution for you.stvracking.com/shop/p/milwaukee-packout-hand-truck-cable-kitWe are releasing our Hand Truck Cable Kit specifically for the Milwaukee Packout Hand Truck. This kit includes everything you need to retrofit your hand truck to give you a single-handed, one-pull, operation to unlock and lift the tongue out of the way.Pair it with our Hand Truck Rack and it is the perfect combo to efficiently collapse and store your Milwaukee Packout Hand Truck.stvracking.com/shop/p/packout-htr-hand-truck-rack
STV Racking Shark Loc Installation Video Glass Impressions 2021-04-17 | Visit www.stvracking.com to organize your shop, trailer, and van. Thank you for watching!
Engraving Leather Tags | CamFive Laser Glass Impressions 2021-02-20 | Using a @CAMFiveCorp Laser to engrave some leather patches.www.stvracking.comwww.andyglassimpressions.com
CamFive 51x32 Laser Setup Video Glass Impressions 2021-02-20 | Hello everyone! Long time no upload!I am launching a partnership with CamFive laser. I am going to bring you a handful of videos over the next 12 months or so.www.stvracking.comwww.andyglassimpressions.com
Van & Trailer Racking Assembly Video | Systainer Version Glass Impressions 2021-01-10 | This video will walk you through how to assemble our Van/Trailer Racking system. This particular unit is for Systainers but we have all the large tool brands available. If we don't have something you need, please shoot us a message on our website.stvracking.comInstagram | www.instagram.com/andyglassimpressionsInstagram | www.instagram.com/stv_racking
Complete Drawer Slide Guide | How-To Glass Impressions 2020-02-19 | The first 500 people to use this link will get 2 free months of Skillshare Premium Membership: https://skl.sh/glassimpressionsJigs used in this video:Rockler Universal Drawer Slide Jig - amzn.to/32gF6mdKreg KHI-Slide Jig - amzn.to/2V4vDN4FastCap SlidePro - amzn.to/2V1eMuDDrawer Slides:Epoxy Drawer Slides - amzn.to/37DB7B5Epoxy Rear Brackets - amzn.to/2HxkFYsSide Mount Soft Close - amzn.to/328rF7rSide Mount Rear Brackets - amzn.to/38HhEAWUndermount Soft Close - amzn.to/38DVYplMisc:#8x1/2" Truss Head Screws - amzn.to/38EFhdjKreg Automaxx 3" Clamp - amzn.to/3246zak
Making a shadow box coffee table with inset truck doors. Glass Impressions 2020-01-29 | Today we are going to make a very special coffee table for a client. We are going to inset old truck doors in the coffee table using a shadow box technique. I really hope you enjoy! If you are interested in a drill storage unit, please click the link below: http://andyglassimpressions.com/store ---------------------------------------------------------------------- Social Media OFFICIAL WEBSITE: andyglassimpressions.com INSTAGRAM: instagram.com/glassimpressions
How to install perfect drawer fronts. Glass Impressions 2019-12-31 | Today I am going to give you a quick overview and demonstration on how I install drawer fronts. Affiliate Link to Drawer Front Jig: amzn.to/3a9biviIf you are interested in a drill storage unit, please click the link below:http://andyglassimpressions.com/store----------------------------------------------------------------------Social MediaOFFICIAL WEBSITE: andyglassimpressions.comINSTAGRAM: instagram.com/glassimpressions
A must see miter saw station! Robotic fence! | SawGear Glass Impressions 2019-09-13 | Today we are going to renovate our miter saw station and bring it up to a standard that promotes an inspirational and happy workspace. Tools used in this video:Rockler Drawer Front Jigs amzn.to/3a9biviMirka 5-In ROS amzn.to/36UJrg9Mirka 5-In ABRANET SAND PAPER amzn.to/2uO2QRUDewalt 23 Ga Pin Nailer amzn.to/2tU6kBPFastCap Glue Bot amzn.to/2uLOPUFFestool Kapex KS 120 amzn.to/36Vq3j9Makita 18v Sub Compact Impact Driver (Black) amzn.to/2FPhHxzPNTGREEN HVLP Spray Gun amzn.to/35TXJMNISOTunes Pro 2.0 Headphones amzn.to/2tVkqD0If you are interested in a drill storage unit, please click the link below:http://andyglassimpressions.com/store...----------------------------------------------------------------------Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTEREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...
Small Closet Made On the ShopBot Tools CNC Router Glass Impressions 2018-08-12 | Today we are going to show the power of the ShopBot Tools CNC router and edge bander combination as we manufacture, assemble, and install this simple closet for a client.If you are interested in a drill storage unit, please click the link below:http://andyglassimpressions.com/store/#!/3-Drill-Storage-Charging-Station/p/106906360/category=0----------------------------------------------------------------------Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTEREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Drill Storage and Charging Sation Glass Impressions 2018-05-29 | If you are interested, please click the link below:http://andyglassimpressions.com/store/#!/3-Drill-Storage-Charging-Station/p/106906360/category=0----------------------------------------------------------------------Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTEREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
3-Drill Storage Charging Station Kit | Assembly Video Glass Impressions 2018-05-29 | If you are interested, please click the link below:http://andyglassimpressions.com/store/#!/3-Drill-Storage-Charging-Station/p/106906360/category=0In this video, I will show and talk you through the assembly process of the 3-Drill Storage Charging Station kit that I offer for sale.----------------------------------------------------------------------Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTEREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Woodpeckers OneTIME Tool | Modular Bar Gauge System Glass Impressions 2018-05-05 | In this video, we will be checking out Woodpeckers' Latest OneTIME Tool. __________________________Traditional Woodworking Plans, CNC files, and to purchase a DIY unit:http://andyglassimpressions.com/store/#!/Drill-Storage-Charging-Station-Items/c/26756171/offset=0&sort=nameDesc__________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Milwauke M18 Random Orbit Sander - No power cord! Glass Impressions 2018-04-24 | In this video, we will be checking out Milwaukee’s M18 Random Orbit Sander.__________________________Traditional Woodworking Plans, CNC files, and to purchase a DIY unit:http://andyglassimpressions.com/store/#!/Drill-Storage-Charging-Station-Items/c/26756171/offset=0&sort=nameDesc__________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Woodpeckers OneTIME Tool | MT Center Gauge and Doweling Jig Glass Impressions 2018-04-13 | In this video, we will be checking out Woodpeckers' lastest OneTIME Tool. It is a rerun of their 2016 MT Center Gauge and Doweling Jig.__________________________Traditional Woodworking Plans, CNC files, and to purchase a DIY unit:http://andyglassimpressions.com/store/#!/Drill-Storage-Charging-Station-Items/c/26756171/offset=0&sort=nameDesc__________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Organize your garage or shop! Drill Storage Charging Station Glass Impressions 2018-04-11 | In this video, I will use the ShopBot CNC machine to show you the process we use to manufacture our Drill Storage Stations. __________________________Traditional Woodworking Plans, CNC files, and to purchase a DIY unit:http://andyglassimpressions.com/store/#!/Drill-Storage-Charging-Station-Items/c/26756171/offset=0&sort=nameDesc__________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Crazy CNC Router Cabinet!!! Glass Impressions 2018-03-22 | In this video, I will quickly cover how fast a Cnc can cut a custom cabinet for a client. The assembly, sanding, and finish took for longer than the design and cutting did. Although, without a CNC, this project would take considerably longer.__________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
ShopBot Auto Tool Changer Setup Glass Impressions 2018-03-16 | Shopbot CNC machines are an awesome machine straight out of the box, but when you pair them with a vacuum table and Auto Tool Changer (ATC), you have a serious production machine. In today’s video, we will be covering the installation, setup, and tuning of the ATC system on our 5’x8’ PRS Alpha unit.___________________________Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Booth Construction | Valley City Bar Project Glass Impressions 2018-03-12 | In this video, we will finish up the Valley City project by completing the booth construction. __________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Woodpeckers OneTIME Tool | CSS-24 Glass Impressions 2018-03-08 | In this quick video we are going to take a peak at Woodpeckers' Latest OneTIME Tool. Their CSS-24 stands for Clamping Support System with a 24" capacity. The concept for the OneTIME Tool is very simple. The Clamping Support System will keep your clamps spaced and upright during a glue-up. Nothing is more annoying when your clamps shift or tip over in the middle of the simplest glue-ups to the most stressful of ones. The CSS-24 comes in two different models. The first is for pipe clamps with a capacity of 3/4" or smaller and the second is for parallel clamps that have slots for 1/4" or 3/8" bar thicknesses. The units interlock in varying positions depending on your clamping needs.Check it out here:woodpeck.com/css24.html___________________________Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Router/CNC/Shaper bit storage tray. Need your opinion! Glass Impressions 2018-03-02 | Need your opinion on:Hole layoutNumber of holesTotal sizePurchase price recommendations?
Valley City Bar | Walnut Table Tops Glass Impressions 2018-02-02 | In this video we are going to continue progress on the Valley City Bar by building the walnut table tops. They are 6' long with 6" of breadboards on each end. The breadboards are installed using the Festool Domino XL 700 and then pegged with shop-made dowels using the Woodpeckers Dowel Press. Hope you enjoy!Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Woodpeckers OneTIME Tool | Paolini Pocket Rule Glass Impressions 2018-01-28 | Woodpeckers latest OneTIME Tool is the Paolini Pocket Rule. The versatile tool was created by Gregory Paolini and manufactured by Woodpeckers. This is the second run of this pocket rule so if you missed the first time, this is a great opportunity to get one in your shop. We have had both the Stainless Steel version and the Aluminum version in our shop for 2 weeks and we have completed two projects and are currently working on another. The Paolini Pocket rule is one of the tools I have been waiting for a long time. It is a simple tool. A graduated rule with three different scale options, metric, inch, or combination and available in three different lengths 6" (150mm), 8" (200mm), and 12" (300mm). There is a rule stop that can slide along the rule and be secured in place by utilizing the two knurled locking knobs. There are two knobs because there is a slot in the middle. This allows the rule stop to hold the rule in a verticle orientation. This allows the user to be hands-free when using the verticle scale on the end of the ruler.If you are in need of a high quality, precision marking instrument, I highly encourage you to check out the Paolini Pocket Rule from Woodpeckers OneTIME Tool lineup in the link below.goo.gl/xtGDqCSubscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: facebook.com/andyglassimpressionsPINTREST: pinterest.com/andyglassimpressionsINSTAGRAM: instagram.com/glassimpresressions
Woodpeckers Latest OneTIME Tool | MFT Layout and Assembly Square Glass Impressions 2018-01-17 | This is the first video in the Woodpeckers OneTIME Tool series.First up we have the MFT Layout and Assembly Square. This product was provided by Woodpeckers to give my full honest review and opinion. This is a dedicated tool for setting up and squaring your Festool MFT Table's fence and rail. It can be a tedious task with other tools but due to the height of the square, it allows you to get a nice registration and not have to worry about holding the blade of a traditional square up in the air.The two included positioning dog holes allow the user to align their material to the rail in 45, 90, or inline. We are really excited about this feature when we have our hole pattern in our 5' x 5' assembly table top we will be building soon.Ultimately this tool isn't needed in the workshop but it could be a necessity if you are someone that constantly is changing the angle on the MFT or moving it to a job site and having to recalibrate it all the time.www.andyglassimpressions.com/storewww.intagram.com/andyglassimpressionswww.facebook.com/glassimpressions
HUGE 28 foot long walnut bar top | Valley City Bar Series Glass Impressions 2018-01-11 | In this first segment of the Valley City bar series, we have a 28' long x 38" wide x 2" thick solid walnut bar top. It is a single piece! Extremely heavy!
ShopBot PRSAlpha 5x8 CNC Machine Overview Assembly 2 of 2 Glass Impressions 2017-12-31 | Today we finish up the ShopBot Cnc assembly and use it for the first time.
IM BACK! Plus quick and dirty SHOP TOUR Glass Impressions 2017-12-23 | I'm back! Yuppers that is right! With a significant amount of time in the tool review world, I am back on the Glass Impressions platform and extremely excited to focus on projects and content creation.Want to buy a drill storage charging station unit?http://andyglassimpressions.com/store/#!/Drill-Storage-Charging-Station/p/97623835/category=26756171Have a CNC and want to cut one yourself?http://andyglassimpressions.com/store/#!/Drill-Storage-Charging-Station-CNC-Files/p/97623839/category=26756171No CNC? No problem! Here is a set of plans to build it using traditional woodworking methods:http://andyglassimpressions.com/store/#!/Drill-Storage-Charging-Station-Plans/p/97623838/category=0www.andyglassimpressions.comwww.facebook.com/glassimpressionswww.instagram.com/andyglassimpressions
Shop Update 04: New shop is 85% setup Glass Impressions 2016-06-18 | In this video, Andy Glass with Glass Impressions give an update on his new shop.Check out the blog post:http://andyglassimpressions.com/?p=3596&preview=trueSubscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Support what I do: https://www.patreon.com/GlassImpressi...See what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
Steel Ball Maze | CNC Project Glass Impressions 2016-06-13 | In this video, Andy Glass with Glass Impressions brings you along as he creates a double sided maze out of a large slab of red oak on his CNC Shark HD3 w/ extended bed.Cutting files for sale here: http://andyglassimpressions.com/store/#!/Wooden-Maze-Aspire-File/p/67509141/category=0Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Support what I do: https://www.patreon.com/GlassImpressi...See what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
Shop Update 03: Packing Glass Impressions 2016-03-28 | In this video, Andy Glass with Glass Impressions brings you along as he starts packing his shop.Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Support what I do: https://www.patreon.com/GlassImpressi...See what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
Turning a bottle opener handle Glass Impressions 2016-03-17 | In this video, Andy Glass with Glass Impressions brings you along as he turns a bottle opener handle using Rockler's Turning Kit.Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Support what I do: https://www.patreon.com/GlassImpressi...See what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
How to turn a wooden bowl Glass Impressions 2016-03-16 | In this video, Andy Glass with Glass Impressions brings you along as he transforms a turning blank into a beautiful bowl.Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Support what I do: https://www.patreon.com/GlassImpressi...See what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
Shop Update 02: Sketchup model of dream shop Glass Impressions 2016-03-11 | In this episode, Andy Glass with Glass Impressions is going to walk you through his sketchup model of his new dream shop.___________________________Support what I do: https://www.patreon.com/GlassImpressi...See what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20___________________________Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
Shop Update 01: We sold our house...and the shop. Glass Impressions 2016-03-10 | Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Support what I do: https://www.patreon.com/GlassImpressi...See what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
Ask Me CNC #1 | Changing bits mid project Glass Impressions 2016-02-22 | In this video, Andy Glass with Glass Impressions debuts a brand new series called Ask Me CNC. This series is dedicated to educating my views on CNC systems and helping them take the next step into the world of CNC. I am no expert but the little head start I have gives me a great opportunity to address any questions, concerns, and help trouble shoot any problems early CNC'ers are having.Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Support what I do: https://www.patreon.com/GlassImpressi...See what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
Fireplace Cabinet Video Glass Impressions 2016-02-14 | In this video, Andy Glass with Glass Impressions brings you along as he completes two built in cabinets for a client.Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Support what I do: patreon.com/GlassImpressions?ty=hSee what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
Build a picture frame bookcase Glass Impressions 2016-02-06 | In this video, Andy Glass with Glass Impressions brings you along as he completes the second half of the #pictureframebookcase build.Subscribe to the Glass Impressions YouTube channel:http://www.youtube.com/user/pbmaster11___________________________Support what I do: patreon.com/GlassImpressions?ty=hSee what tools and supplies I use: http://astore.amazon.com/glassimpre0d-20Social MediaOFFICIAL WEBSITE: andyglassimpressions.comFACEBOOK: https://www.facebook.com/andyglassimp...PINTREST: https://www.pinterest.com/andyglassim...INSTAGRAM: https://www.instagram.com/glassimpres...Andy Glass7511 Keystone DriveBismarck, ND 58503© Glass Impressions LLC
