Nerdly Pleasures (Great Hierophant)
Baldurs Gate - Original Opening Cinematics, Character Creation & Prologue
updated
The IBM PCjr. and early Tandy 1000s use a TI SN76489 or 76496 4-voice Programmable Sound Generator (PSG) chip, and there is a significant difference in how it handles the noise channel compared to the NCR 8496 and Tandy PSSJ chips found in the later Tandy 1000s. Any write to the noise control register in the chip resets the noise generator on the TI chip but not the NCR chip. This leads to many sound effects and some music percussion notes in games being cut off by the TI chip if the game keeps writing to the noise control register.
00:00 - Curse of the Azure Bonds TI SN76489/76496 Sound Effects
I am capturing this on my IBM PCjr because that is the only way I can demonstrate the TI's noise channel. My PCjr. has a hardware "Tandy mod" installed and activated in order to show the Tandy graphics properly. Without the Tandy mod you are stuck with CGA 4-color graphics on the PCjr. or 16-color Tandy graphics where every other line is not shown. On the PCjr. you also need to run a program or a game like King's Quest I beforehand to set the audio multiplexer to output PSG audio instead of the default PC Speaker audio, otherwise you will hear nothing with Tandy audio set in the game's configuration file.
01:38 - Curse of the Azure Bonds Sound Effects NCR 8496/Tandy PSSJ
I am using a Tandy 1000 TX for this part of the video and those systems use the NCR 8496. This chip and the Tandy PSSJ chip that came after in the TL and SL seem to be the chips targeted by SSI for 4-voice sound effects in Gold Box games. As the TX is much faster than the PCjr., this part of the video is much shorter.
Samples of the PC Speaker sound effects are not hard to find for these games, so I do not demonstrate PC Speaker sound effects because they are quite commonly used in other videos of these games.
00:00 - Pool of Radiance Tandy PSG
The theme plays during the opening two screens of Pool of Radiance on a Tandy 1000 using the Tandy 4-voice Programmable Sound Generator (PSG). Unfortunately there is a loud long flat note which is caused by a spurious write to the PC Speaker which drowns out some of the music. Fortunately only one such note will be heard. All Tandy 1000s suffer from this issue because they always mix PC Speaker output into the PSG output. IBM PCjr.'s do not have this issue because they do not mix PC Speaker and PSG output.
The theme's length is 1:40, but unless you press the Hold key on the Tandy 1000 keyboard or the Pause key on a PC keyboard, you will only hear about 15 seconds of music. A slower system will play the music for only 2-4 seconds longer than a faster system without pressing Hold/Pause. Pool of Radiance will also play all but the first few measures of Fanfare at the start of every combat and will play the music until one of the combatants makes a move. This is unique to the PC Compatible version I believe. As this music is heard every time a battle begins in the game, it tends to get annoying and was probably the reason why it was eventually removed.
01:48 - Curse of the Azure Bonds Tandy PSG
Curse will play the theme song with the 4-voice sound for nearly a minute, but will not finish the song no matter how slow the system is unless you press Hold/Pause on the keyboard. Unlike Pool the music for Curse is not glitched.
03:53 - Curse of the Azure Bonds PC Speaker
Unlike Pool, Curse will play the theme with the PC Speaker.
Neverwinter Nights (Gold Box) will also play the (unglitched) theme music from Pool & Curse in both its Tandy PSG and PC Speaker variants but you do not need to press Hold/Pause to hear the whole song.
00:00:00 - Sierra Online IBM PC Version
To start the capture I am using an IBM PC/XT running a 4.77MHz 8088 with an old IBM CGA card. I am also using the original Sierra release of the game, which only runs off floppies. I am not using the version from the Ultima Collection CD (which requires a community patch to restore several of the non-Earth planets) that everyone seems to use. I am capturing the video via composite video so you can see the proper artifact colors the game was designed to show. If anyone thinks these are not the intended graphics, think magenta-colored water.
The game uses the 320x200 4-color mode with the non-intense cyan/magenta/white palette as the base for its graphics. The IBM CGA card can output both 4-color RGBI and composite color at the same time with their respective video outputs. Other CGA cards with a composite output should show some type of color, but it may not be appropriate.
When Ultima II was ported to the PC in 1983, the major PC systems on the market were the IBM PC, IBM PC/XT and their clones. The game was designed to run at the official speed of these systems, no faster or slower. The sound effects are tied to the system speed and will sound different if you increase the system speed to any appreciable degree. Sierra later re-released this PC version of Ultima II in 1985 with support for making the game bootable with later versions of DOS and different copy protection.
After I defeat the game I show the graphics for all seven monsters you can find in the game's towers and dungeons. These graphics use composite color extensively, but I am using a special program to display these graphics as extracted from the game to save time.
00:46:52 - Origin Systems PC Version
In 1989 Origin Systems had reacquired the rights to Ultima II from Sierra, but as the game was rather aged Origin re-released it along with Ultima I and Ultima III in the Ultima Trilogy. While the previous PC versions and the PCjr. version came on three disks (Program, Player, Galaxy), this version combined the Program and Galactic Disks onto one disk. The Player Disk files remained separate from the Galactic Disk files, so there are no missing worlds here. They were a casaulty of the CD re-releases. You will note in this version that several of the sound effects have been changed because, by 1989, there were a multiplicty of PC system speeds. The old sound effects relied on a system speed that was seen as slow by 1989, so they were simplified. The sounds that play before the title screen have been removed. The game is still speed sensitive, so I am playing it on the IBM PC/XT. I do not show as much of the game as with the previous version as the major change was to the sound.
No PC version as released shows the Greenland Dungeon entrance in Pangaea found in the Apple II original and all show the same ending message. On the plus side they don't have the strength bug that the first release of the Apple II version had. Landing the rocket is very difficult, you can only land on grass tiles, anything else is death and the rocket orbits the planet rather quickly. I edited out several failed attempts to get into space and back.
01:02:46 - Sierra Online IBM PCjr Version
Due to copy protection, the original PC version of Ultima II does not work with the PCjr.'s disk controller. Sierra developed a special version of the game in 1984 that does. I am using my PCjr.'s composite output to capture the game. The PCjr. supports 4-color CGA modes and artifact color, but Sierra had to adjust the graphics slightly from the PC version to show artifact colors appropriate for the PCjr. The game's sound effects have been speed adjusted to run correctly on a 128KiB PCjr. Loading a memory manager for a 256KiB+ PCjr. will make the game run too fast. This version was almost unknown until a few years ago. Like with the Sierra PC version, at the end of the game I show the dungeon monster graphics in their composite colors using a special program.
0:00 - Typical Capture
3:09 - Appropriate Capture
Capturing The Immortal with typical NES settings from original hardware gives a very, very dark picture. The settings in the first part of the video will give a good capture of a more typical NES game but not for games like this. To give a proper representation of how the game is intended to look, we need to increase the brightness and contrast levels. The second part of the video shows the completion of the first dungeon level.
Typically with the I-O Data GV-USB2 I set brightness and contrast to 128 for NES and that works well for a standard game. When I set the brightness and contrast to 160, the screen looks brighter and the colors are no longer muted. I also switched the GV-USB2's Video Standard setting from NTSC_M to NTSC_M_J for a lower black level. It is assumed that typical players would have turned up the brightness and contrast dials of their TVs to address the dark image shown by the game. But these settings, while appropriate for The Immortal, are ludicrous for normal games. I show the transition using the EverDrive N8 Pro's menu (running on an AV-modded Famicom).
When we dial in appropriate settings, we also tease out a "third gray" out of the darkness. The Immortal is also notable, some may say notorious, for using NES color palette color $0D. This "blacker than black" color is very close to the horizontal blanking level of many TVs and can cause absolute havoc with more modern displays, even some CRTs. Its use is generally not recommended because there are several other black entries within the NES's 64-color palette which will produce a normal black that will not affect normal TVs.
When the brightness is turned up, regular black will become dark gray while the blacker-than-black color $0D will remain black. The NES normally has two light grays and two dark grays in its palette, but the light grays and the dark grays are very close to each other. The best place to see the "third gray" is in the combat screens with the goblins. Parts of the wizard's robes and the goblins' skin no longer look black as they typically do in other video captures and emulators. The inventory also shows the third gray for some graphics. Emulators can show the third gray with a special palette.
The Super Nt was originally released in February, 2018 and was sold unchanged for two to three years. After a significant period of time when the console was unavailable for purchase, Analogue began taking preorders for a final run of the Super Nt and Mega Sg in late 2022. New Super Nts began shipping about a week ago. These 2023 Super Nts have component changes due to previous components now becoming end of life. As a consequence, a "new" Super Nt owner cannot downgrade to firmware released before 2023.
There is another difference between the old and new Super Nts. The audio mixing circuit has changed between the two consoles. A cartridge like the SGB sends its audio to the console in analog form, where it is digitized and combined with the audio being generated from the Super Nt. The filtering in the new Super Nts is notably different from the old Super Nts. I have made this video using my Super Game Boy 2 and EverDrive GB X7 to demonstrate the differences in the filtering with an old Super Nt compared to a new Super Nt. In both Super Nt systems, the Cartridge Audio Input was set to 100 in the Super Nt's menu.
The first half of the video is recorded with a new Super Nt, the second half is with an old Super Nt. I recorded via the Super Nt's HDMI mode to ensure that the Game Boy screen aspect ratio is set to its ideal for Game Boy graphics. The only thing that changes between the first half and the second half of the video is the console, all other components remained the same.
0:00 - Super Mario Land
1:30 - TMNT Fall of the Foot Clan
4:45 - Donkey Kong
8:23 - The Legend of Zelda: Link's Awakening DX
12:15 - Super Mario Land
13:46 - TMNT Fall of the Foot Clan
16:01 - Donkey Kong
20:23 - The Legend of Zelda: Link's Awakening
I had pulled the video output pin of the PPU, Pin 21 out of its socket to reduce the jailbars. I tried putting the pin back into the socket but broke it off. As there was only a sliver of metal sticking out of the PPU's plastic encapsulation I had to grind the plastic down with a dremel until I could expose enough of the track to solder a wire. I snaked a wire around the PCB to the underside to avoid the jailbar route as I had done with the Cathouse Games board. The video out and ground wires from the Adapter were connected directly to the 3.5" socket of the Power VAMP v3 board.
The end result as shown here may show jailbars noticeably where my previous video did not but I would note that YouTube has been increasingly unkind to older "SD-only" videos, compressing them to the point where they look worse now than they did when originally updated.
I am using my Apple IIc to record the music. The Apple IIc has a headphone jack, an amplifier and a volume wheel. This makes recording any Apple II Speaker sound remarkably simple. Here I am demonstrating that with a reasonably complex piece of music for the Apple II. I also included the system startup beep.
The Apple IIc can actually do justice to its internal speaker's audio. Other recording techniques, like using a sound card, can fall short. Recording from an Apple II, II+ or IIe has its challenges as there are no readily available audio outputs and people often resort to alligator clips for that purpose.
There is a single clock source in a PC, XT or PCjr., a crystal which oscillates at a frequency of 14.318MHz. This frequency is divided to obtain the many clocking signals used by the PC, XT and PCjr. There is a clock generator chip in these systems, the Intel 8284, which divides the 14.318MHz signal by 3 in order to derive the CPU frequency, 4.77MHz.
In order to overclock a PC, XT or PCjr., you must supply a higher clock signal to the CPU and only the CPU. Other components of the system and some expansion cards use the 14.318MHz frequency and do not work properly if it is changed. There is a small printed circuit board designed in the mid-1980s called "PC Sprint" which piggybacks or replaces the 8284 chip and hosts two 8284 chips. One 8284 processes the 14.318MHz signal normally, the other processes a higher frequency signal and send that only to the CPU's clock pin. The board has a jumper to allow you to use regular frequency instead of the higher frequency if needed for compatibility. The board is simple enough that its design has been reverse engineered and open sourced.
In the IBM PC and XT, the 8284 chip is usually socketed, making the installation of the PC Sprint board very easy. The IBM PCjr. has a soldered 8284, so installing the PC Sprint requires desoldering the existing 8284 and installing a socket into which the PC Sprint board can be fitted.
The PC Sprint has a clock crystal on it which dictates the resulting speed of the CPU. Although the CPU is running faster with a PC Sprint than without it, it is still constrained by other components in the system that expect a 4.77MHz CPU. The RAM and ROM only have a certain amount of time to respond to the CPU, so if the RAM is not fast enough to keep up with the faster CPU, the system will not be stable. You also need to ensure that your CPU is rated for the speed you wish to achieve. 8088 and V20s are rated to run at 5MHz, 8MHz or 10MHz and the chip markings (-2, -1/-10) will indicate whether the CPU is rated for faster than 5MHz operation.
This video was taken with my PCjr., first running an 8088 CPU at 4.77MHz and then running a V20 CPU at 7.37MHz. The frequency is derived from the clock crystal on the PC Sprint, which is 22.11MHz (divided by 3). The RAM and hard drive is provided by a jrIDE. jrIDE uses SRAM, which does not need to be refreshed, unlike DRAM. This gives a very slight improvement over contemporary DRAM-based PCjr. memory expansions. jrIDE is attached to a Compact Flash adapter and I am using a 1GB card for my "hard drive." I have heard stories of both success and failure with speeds significantly above 7.16MHz. A 50% overclock is still a very impressive feat for any system, and that extra speed comes in handy.
To demonstrate the speed differences, I captured the graphical boot screen and a little gameplay from four PCjr-appropriate games, King's Quest III, Leisure Suit Larry, Space Quest II and Manhunter: New York. All games are running from the Compact Flash card and using the latest game and interpreter versions. First I capture them at their standard 4.77MHz speed on the 8088 and then on their 7.37MHz speed on the V20. I edited out all the DOS screens in between running each game but not the loading times so you can get a reasonably accurate indication about how long it takes to load a game.
8088 @ 4.77MHz
00:00 - Boot
00:26 - KQ3
02:24 - LL
06:01 - SQ2
09:45 - MH
V20 @7.37MH z
16:54 - Boot
17:10 - KQ3
20:10 - LL
22:39 - SQ2
25:06 - MH
Tandy released not only joysticks but mice for the TRS-80 CoCo. The first mouse, the Color Mouse, only had a single button. Tandy later released a "Deluxe" Color Mouse which had two buttons. Internally these mice function like joysticks, the ball and rollers turn potentiometers like the stick of a joystick turns the potentiometers. As potentiometers have a limited movement range, the mouse will eventually stop registering movement in a particular direction. A regular mouse uses optical encoders with an unlimited range of movement and can be read much faster by the system than a resistance or voltage comparators that IBM and Tandy joysticks use.
The Tandy machines without a serial port are the 1000, A, HD, EX, HX and SX. It is not too difficult to add a serial port card to the 1000, which has three ISA expansion ports, and even easier with the SX, which has five. Until the last few years it has been much more difficult to add a serial port to the EX or HX, which only accept PLUS connector expansion cards. For this video I am using my SX (which does have a serial card but nothing is connected to it).
As the Tandy CoCo mice behave like joysticks they can work with the Tandy 1000s. If you want them to show up as mice to DOS programs, you have to load a special driver. Tandy included an office software suite called Personal Deskmate with the EX which included a special driver called JOY.SYS. You load JOY.SYS in your CONFIG.SYS with a line like this: DEVICE=C:\PDM\JOY.SYS and then programs could detect the Color Mouse as a mouse.
Tandy also sold bus mice, serial mice and eventually PS/2 mice. Tandy was offering the one-button Color Mouse for the CoCo in 1984 but the two button Deluxe Mouse was not offered until 1987. In 1987 the preferred upgrade path for these older systems would have been to a bus mouse or a serial mouse, but it was more expensive for machines without a serial port because you had to add one. If you had a serial port the price of the serial mouse was the same as the Deluxe Color mouse, so I would imagine no Tandy 1000 owner would have bought one unless they were really strapped and had to have a mouse.
Mice support in games in the 1980s was not common, but not unheard of either. I have gathered here a few earlier games that will run acceptably in a 7.16MHz 8088 EX, HX or SX at their standard or slow speeds (4.77MHz).
00:00 - Demon Attack
This Atari 2600-original game is an early self-booting game released solely for the Tandy 1000 and requires a joystick to run. This version had previously been released as a PCjr. cartridge with no title screen. I thought that the mouse may work well in this game as a joystick because your ship only moves on one axis. As this is a booter no mouse driver can be loaded. Tandy actually advocated for this program to be used with this game in the Mouse's manual to make "your cursor control easier and more efficient."
02:17 - Maniac Mansion
While Maniac Mansion was originally designed for a Commodore 64 and a joystick, mouse support was added when the game was released for more advanced computers. Press Shift-M to activate the mouse if it is not designated as On in the PREFS file. Maniac Mansion also supports a joystick on the PC and can be played with only a keyboard.
05:26 - Shadowgate
Shadowgate was developed for the Macintosh, which requires a mouse to operate. Here it can support a mouse, but the game must be run with the CPU set to the slow speed or the cursor will not go to certain areas of the screen and the digitized sound will be wrong. Shadowgate supports a joystick.
10:51 - Arkanoid
Arkanoid originally used an optically encoded rotary dial to control the Vaus in the arcade, which is essentially 1/2 of a standard mouse. Here is how it fares with the Tandy mouse. It also supports keyboard and joystick control.
12:51 - Personal Deskmate
Personal Deskmate's first version was released with the Tandy 1000 EX and only works on Tandy 1000s because it uses their 640x200 4-color mode. Its mouse drawing routines are not compatible with standard mouse drivers and the mouse will be drawn as a glitchy box when a standard driver is used. The JOY.SYS driver shows the mouse properly. Tandy also released an optical encoded bus mouse called the Digi-Mouse which has a driver which can also show the pointer properly. Personal Deskmate II does not have this issue with mouse pointers. The mouse pointer is not required to use Personal Deskmate.
Outrun was released in three distinct versions. All versions support CGA, Tandy, EGA/VGA and Hercules but only a maximum of the 16 colors of the Tandy/EGA palette are supported. The first release was distributed by Mindscape in the U.S. and only supports PC Speaker music and sound effects. The second release was distributed by U.S. Gold in Europe and additionally supports Tandy 1000 TI SN 76496/NCR 8496 PSG music and sound effects on older Tandy 1000s (1000, EX, HX, SX, TX). On some later Tandy 1000s equipped with the Tandy PSSJ DAC (SL, SL/2, TL, TL/2, RL) , the game supports digitized voice samples and sound effects. The third release, which was released in the U.S., is essentially the same as the second release except it replaces the male voice with a female voice.
Wings of Fury was released only once as far as is known. It supports PC Speaker sound effects or Tandy DAC sound effects on the systems previously identified.
Wings of Fury and Outrun are special because these are the only two DOS games which have been confirmed to playback digital audio samples on the Tandy DAC and do not support a Sound Blaster or any other sound card for digital playback.
Many videos on YouTube only show these games being played with PC Speaker music (Outrun only) or sound effects. In this video I will demonstrate all music and sound effect options for both games.
00:00 - Outrun PC Speaker Music
02:52 - Outrun PC Speaker Sound Effects
04:27 - Outrun Tandy Music and PSG Sound Effects
07:26 - Outrun Tandy PSG Sound Effects Only
09:00 - Outrun Tandy DAC Female Voice
09:41 - Outrun Tandy Music and DAC Sound Effects
11:42 - Outrun Tandy DAC Sound Effects Only
13:28 - Outrun Tandy DAC Male Voice
13:34 - Wings of Fury PC Speaker Sound Effects
18:05 - Wings of Fury Tandy DAC Sound Effects
In Outrun there are PC speaker sounds for the engine even with Tandy PSG or DAC Sound Effects. The three versions play similarly so playing the game after the male voice is unnecessary. These voice samples are the only examples of digitized speech in their respective versions. The PC Speaker Outrun clips were taken with the first U.S. release, the Tandy PSG Music and Sound Effects clips and the male voice clip were taken with the European release and the Tandy DAC gameplay footage and female voice used the second U.S. release.
The Tandy PSG sound effects in Outrun will not be heard in DOSBox usually because DOSBox has no ability to emulate a Tandy 1000 PSG without a DAC. If these game detect the DAC they will always use it, even if set to CGA, EGA or Hercules mode (which is broken with the built-in Hercules support of the later Tandy 1000s regardless of game version).
Unfortunately the Tandy DAC is not compatible with joysticks on the original Tandy 1000 hardware, so you will have to use keyboard controls with these games on these systems. The basic Tandy PSG-only systems have no issues with the joystick.
These games are not compatible with the Tandy 1000 TL/3, RLX, and RLX-B because they use a newer revision of the PSSJ chip that causes freezes or wrong sounds to be played. Other systems with a PSSJ chip, the 1000 RSX, the 2500 XL and the Sensation! relocated the I/O addresses of the PSSJ chip so they could be fully AT compatible and these games access the chip directly instead of using BIOS functions.
In my prior video, in which I used DOSBox for all game capture footage, dog-eared viewers noted that the volume levels seemed off with the Tandy DAC relative to the PC Speaker sound effects. So I have taken down that video and retaken all the video footage using my Tandy 1000 TX, 1000 TL, RGB2HDMI and Datapath VisionRGB E1s. All the videos that show PC Speaker or Tandy PSG-only audio used the TX, the videos with digitized audio use the TL.
00:00 - Super Mario Land 2 Pocket
Original DMG Display Mode
02:14 - Metroid 2: Return of Samus Pocket
Original GBP Display Mode
05:47 - Kirby's Dream Land Pocket
Analogue GB Display Mode with "Mint" Color Palette
08:37 - Gargoyle's Quest Pocket
Original GBC Display Mode with "Green" Color Palette. Pocket does not yet support custom color palettes with cartridge games, so I used the closest to the GBC BIOS's default palette. It does support GBC BIOS palettes with openFPGA GBC Core, but Display Modes are not yet available for openFPGA cores.
13:48 - The Legend of Zelda: Link's Awakening DX Pocket 1
Original GBC Display Mode
16:50 - The Legend of Zelda: Link's Awakening DX Pocket 2
Original GBC+ Display Mode
20:03 - Super Mario Land 2 Switch
Game Boy DMG Mode, first without classic feel, then with classic feel.
22:28 - Metroid 2: Return of Samus Switch
Game Boy Pocket Mode, first without classic feel, then with classic feel.
33:04 - Gargoyle's Quest Switch
Game Boy Color Mode, GBC BIOS palette applied (the default one). Kirby's Dream Land, Metroid 2, Super Mario Land 2 and Tetris will have their custom GBC BIOS palettes when run in Game Boy Color Mode.
29:12 - The Legend of Zelda: Link's Awakening DX Switch
Can only be played in Game Boy Color mode on Switch, even though this game is a hybrid game. Pocket can play this game as if it were played on either a Game Boy or Game Boy Color.
The cutscene and menu music is only servicable, but the in-flight score is quite impressive on a Roland Sound Canvas, and is almost inaudible in the game's default configuration due to the continuous loud engine sound.
00:00 - Introduction
00:51 - Main Menu
03:02 - Object Viewer/Enlistment
03:57 - Belgium Base
05:50 - Launch
06:16 - Defend Mission
07:40 - Regular Combat
09:24 - Target Destroyed
09:31 - Successful Defend Mission
11:07 - Mission Completed
12:34 - Newspaper
12:42 - Patrol Mission
13:49 - Successful Patrol Mission
15:14 - Strike Mission
16:20 - Successful Strike Mission
18:13 - Award Ceremony
18:34 - Ally Killed
19:33 - Floundering
20:54 - Shot Down
21:32 - Death and Game Over
22:33 - Player's Funeral/German Spy Exposed
23:29 - Charles Dearing's Funeral
24:44 - Leaving the Base
25:40 - 96th Aero Squadron
26:43 - Running Out of Fuel
26:52 - Charles Dearing's Grave/Finale
28:15 - Title Screen
28:25 - Credits
30:19 - Sound Test
00:00 - Introduction, Main Menu
01:24 - Gauntlet Mode
03:52 - Confederation: Cruising
05:19 - Confederation: Regular Combat
06:09 - Confederation: Intense Combat
07:04 - Confederation: Target Destroyed
07:08 - Confederation: Victory
07:41 - Confederation: Death
08:14 - Confederation: Unknown
09:11 - Kilrathi: Cruising
10:55 - Kilrathi: Regular Combat
11:30 - Kilrathi: Intense Combat
12:01 - Kilrathi: Target Destroyed
12:06 - Kilrathi: Victory
12:37 - Kilrathi: Death
13:28 - Kilrathi: Unknown
14:52 - Multiplayer Setup
16:06 - Armada/Campaign Mode
18:29 - Your Carrier Destroyed
18:59 - Opponent's Carrier Destroyed
19:30 - Credits
The NES's hardware generates NTSC composite video directly on its Picture Processing Unit (PPU). The Vs. System used a series of PPUs which generated analog RGB video. In order to prevent games from being easily interchangeable, Nintendo had different Vs. System PPU chips output different colors, have rearranged registers or tweak the inputs. The coin input is not present on a NES or Famicom (but the service button is and often can be used in place of the coin input). These protection features make it much more difficult to play these games as intended on a Nintendo home console, even with a flash cart. Without non-trivial hacking, most Vs. System games will show extremely wrong colors if they start at all. The Nt Mini Noir can play any known dumped Vs. System game that uses only one monitor and supports dip switches (see the jailbreak readme.txt for more details).
The Nt Mini Noir supports almost all the protection features of the Vs. System. It can handle palettes with scrambled colors, swapped/special PPU registers unusual input methods and mapper variants. It also supports all video types the Nt Mini Noir supports, HDMI, RGB, Component, S-Video, Composite. The Nt Mini Noir supports custom palettes for HDMI, RGB and Component video and all three derive their palette colors from a matrix of RGB triplet values. With Composite and S-Video, the Nt Mini Noir generates NTSC video directly like a NES' PPU does (Composite) or would have (S-Video if Nintendo did not combine chroma and luma in the PPU). The Dejitter box in Video - Extra Features should always be unchecked when using Composite video on the Nt Mini and the NES core.
Custom palettes do not work with the Nt Mini Noir's NES Core with composite or s-video in gameplay (except that the selected custom palette will display when the menu is on-screen) with one exception, Vs. System. With Vs. System games, the Nt Mini Noir converts the RGB-based color values of the PPU to composite or s-video. (The jailbreak readme is not correct on this point.) So when you view these games on a composite display, they will look a little different compared to a regular NES' display even once you account for the different palette colors. The games used here, while from a very limited of games, should be equivalent to the composite video output exhibited from a Famicom Titler, which also uses an RGB-based PPU.
In this video I will demonstrate this difference by playing the normal cartridge versions of Super Mario Bros., Castlevania and Urban Champion next to their Vs. System counterparts, all captured via the Nt Mini Noir's composite video output (built-in, not DAC). Here are the timestamps:
00:00 - Super Mario Bros.
01:01 - Vs. Super Mario Bros.
02:03 - Castlevania
03:35 - Vs. Castlevania
05:24 - Urban Champion
07:49 - Vs. Urban Champion
Many of the .XMI files consist of several subsongs, among which are quite a number of repetitions. Our recording splits up these subsongs and removes several repetitions for a more concise and interesting listening experience.
00:00 - Banished to the World of Pagan (Main Title)
04:00 - The Docks
05:39 - The Execution on the Bridge
07:43 - The Docks Reprise
08:48 - Tenebrae, City of Eternal Twilight
10:30 - Fishermen's Reef
11:49 - The East Road
12:39 - The Cemetery with The Ceremony of Eternity
14:40 - The Upper Catacombs
16:39 - The Ancient Necromancers
19:36 - Regular Combat and Victory
21:15 - The Ancient Necromancers Reprise
22:17 - The Hall of the Mountain King
23:32 - An Audience with the Mountain King
25:29 - The Shrine of the Ancient Ones
27:27 - Ancient Zealan Gods
29:44 - Argentrock Isle
31:00 - Running Away and Death
32:16 - Stratos, the Titan of Air
33:27 - Argentrock Isle Reprise
33:57 - Carthax Lake
35:05 - Facing Hydros, the Lurker
37:26 - Hydros is Free
37:56 - Daemon's Crag
39:38 - Planes of Air and Fire
42:11 - Summoning Pyros, the Titan of Fire
43:06 - The Hall of the Mountain King Reprise
44:08 - The Pit of Death
45:19 - The Ethereal Plane
47:08 - Finale
49:20 - Quotes from the Developers
0:00:00 - Introduction
0:01:22 - Main Title
0:02:37 - Object Viewer
0:04:21 - Training Mission
0:06:14 - Mercenary Defense License
0:07:19 - Flight to Nouakchott
0:09:09 - Nouakchott Base
0:10:21 - Nouakchott Plane
0:11:06 - CD Data Loading
0:11:57 - Escort Mission
0:13:25 - Regular Combat
0:15:05 - Tailing Enemy
0:15:45 - Firing Missile
0:16:15 - Enemy Fighter Destroyed #1
0:16:27 - Mission Successful
0:17:48 - Post-Mission
0:18:11 - Strike Mission
0:20:12 - Enemy Fighter Destroyed #2
0:20:24 - Approaching Ground
0:21:55 - Firing at Ground Target
0:22:19 - Ground Target Destroyed #1
0:22:41 - Bridge from Approaching Ground Target to Intense Combat
0:22:52 - Intense Combat
0:23:45 - Ground Target Destroyed #2
0:24:01 - Overall Victory
0:25:03 - Landed
0:25:55 - Returning to Wildcat Base
0:26:25 - To Istanbul
0:26:51 - Selim's
0:28:15 - Prideaux's Niche
0:29:06 - Talking to Fixer
0:30:30 - Intercept Mission
0:31:41 - Enemy Fighter Destroyed #3
0:31:53 - Enemy Fighter Destroyed #4
0:32:05 - Being Tailed
0:32:41 - Missile Tracking You
0:33:24 - Missile Chasing You
0:33:43 - Death
0:34:46 - Player's Funeral
0:36:31 - To Andes Mallorca
0:37:39 - Andes Mallorca Base
0:39:10 - Andes Mallorca Plane
0:39:54 - Patrol Mission
0:41:20 - Mission Failure
0:42:01 - Stern's Message
0:43:28 - Wildcat Base Attacked
0:44:19 - Stern's Funeral
0:45:53 - To Cairo
0:46:30 - Cairo Base
0:47:57 - Cairo Plane
0:48:41 - Eject
0:50:29 - To Quebec
0:51:23 - Quebec Base
0:52:34 - Quebec Plane
0:53:21 - Assaulted in the Street
0:54:55 - To Germany
0:55:35 - Germany Base
0:56:41 - Germany Plane
0:57:26 - Walter's Mistake
0:59:45 - Drunk Wildcats
1:01:24 - Steal the F-22 Stealth Fighter
1:02:00 - Janet
1:04:04 - Landing in the F-22
1:05:09 - Mendez Shot Down
1:06:26 - Finale
1:08:18 - Closing Credits
1:11:08 - CD-ROM Version Introduction
Direct color is the CGA's ability to generate hues directly with its onboard circuitry. Through a series of flip flops and delay lines, CGA can display pixels that correspond to hue phases on the NTSC color wheel. Direct color is typically seen with text modes, but text modes have the ability to turn the NTSC color burst off in the IBM PC, XT and many clones, leaving only the monochrome representation of the pixels. Direct color will usually be seen with the 320x200 graphics mode and the standard cyan/magenta/white/background color and green/red/brown/background color palettes, especially for large areas of solid color. Direct composite color is very similar to the colors produced on an RGBI monitor with the notable exception of brown. Direct color 08 is intended to be brown on an RGBI monitor and is accomplished by reducing the green component of the color when that particular color is being displayed. Composite monitors have no such "brown-aware" circuitry and are likely to display the color as dark yellow.
Artifact color is the CGA's ability, in conjunction with an NTSC color composite monitor or TV, to show colors that should not be present and to alter the expected color to another color. NTSC combined a higher frequency luminance signal (4.2MHz) with a lower frequency color signal (3.58MHz), but when the luminance signal is significantly higher and an even multiple of the color signal, which is the case in the CGA's high resolution graphics mode (14.318MHz), the luminance signal will be decoded as a color. In this case, as the luminance signal is 4x the color signal, four high resolution pixels will chose the color for one "low" resolution pixel.
I have presented in this video four CGA-compatible devices which display composite color. All were tweaked to show correct black (0,0,0) and white (255,255,255) RGB levels from the capture card (a Dazzle DVC-100). Saturation was adjusted to get "good" colors from every adapter. The names of the direct colors are taken from IBM's Technical Reference manuals. As IBM never gave names to artifact colors, and these colors were inspired by Apple II artifact colors, their names are taken from the Apple II's Color Demosoft program. For all adapters, the gray artifact colors 5 and 10 are identical but direct color grays must be distinguishable from themselves as well as black and white.
1. IBM PC/XT with an Old-style IBM CGA
00:00 - Direct Color
00:11 - Artifact Color
IBM's original CGA was designed for displays with a greater tolerance for a strong video signal and shows artifact colors identical to an Apple II Plus's and later models Graphics Modes. The Old-style IBM CGA's signal is so strong that neither of my capture devices and handle the signal correctly without reducing the card's composite output voltage significantly. This is the only card which requires a voltage reduction to show all direct colors (light gray will look identical to white without reducing the voltage).
Old CGA is by modern standards not a signal with strong color saturation at normal levels of saturation. In order to show properly pleasing colors, I set my capture card's saturation to the maximum value.
2. IBM PC/XT with a New-Style IBM CGA
00:21 - Direct Color
00:31 - Artifact Color
In 1984 IBM designed the composite video output of the CGA card to show 16-more or less distinct levels of brightness (versus 6 with Old CGA) with a monochrome display by feeding the luminance values of each color back into the output. This change coincided with the release of the IBM PC Portable, which had a built-in amber screen. This change also caused some slight color differences to the old CGA card. Direct colors remain more-or-less the same accounting for changes in brightness and saturation, but artifact colors have changed slightly. The most notable change is that magenta becomes red. The artifact colors can be adjusted from old CGA to new or from new to old in high resolution graphics mode with a white gray foreground color with a minor adjustment to the tint control of the monitor.
Description continued in first comment due to length/
The sound is being produced by a Diamond Monster 3D MX300, which uses the Aureal Vortex 2 sound processor. All mid-to-late 1990s PCI sound cards offer some kind of Sound Blaster emulation, and this card has its good and bad qualities on that score. The good part of this card's emulation is the digital audio playback, which is quite good if clipped. The digital stereo panning this game supports via the Sound Blaster Pro/16's mixer appears to be working. Unfortunately the chip's FM Synthesis emulation leaves a lot to be desired, with many instruments sounding "off". I am unsure whether the drivers for the card have a mixer setting to reduce the digital SB volume relative to the FM volume. The emulation works in Windows as well as DOS, but some games may require Real Mode DOS (Exit to DOS) and may require that the driver be enabled for Real Mode DOS.
This PC's motherboard is a ASUS P3B-F, which uses an Intel i440BX chipset and has two ISA slots, so I could have used one my many ISA sound cards to produce more faithful FM music and sound effects. Even some PCI sound cards come with genuine Yamaha FM Synthesis (YMF-7xx, very good compatibility with BX boards) or have excellent sounding FM synthesis (CMI8738-based cards, compatibility is hit and miss). But I chose to show off the capabilities of the Vortex 2 for your listening pleasure!
Karateka for the IBM PC and compatibles is a DOS floppy, not a PC booter. It was ported by The Connelley Group in 1986 and appears to be the only port done by that company to the IBM PC. Judging by the quality of this port, developers and publishers were not beating a path to their door. The load times are absurdly long compared to the slower Apple II disk interface and the graphics palette used is uninspired and lazy. I kept all of the loading times in, if you want to go to the start of the gameplay, go to 4:08.
The only place where the developers put any effort is in the combat, which is usually at a tolerable speed, and the music/sound effects. The Apple II used pulse width modulation to produce music and the PC porters tried to replicate that technique, but their faithfulness to the pitch of the original music was less than perfect. More annoying is that their PWM routine was speed sensitive. While this may have been justifiable in 1984 when the IBM PC was the only affordable PC compatible on the market, in 1986 that was absurd. Even though the box says the game is compatible with the IBM PC AT and Compaq Pro 286, the music and sound effects come out as high pitched squeaks on those machines. Emulators usually get the music and sound effect speed wrong or produce the wrong pitch. I wanted to get the speed correct with the hardware on which this port was intended to run, the IBM PC, XT and similar machines.
Karateka had many ports, but only the IBM PC port tried to replicate the music by way of PWM and has sound effects that sound like the Apple II's. A lot of the ports have rather tinny sounding sound effects, but some of them use PWM for the "Kai" sound your karateka makes when assuming a fighting stance.
If the game used the unofficial but widely supported cyan/red/white CGA palette instead of the official IBM cyan/magenta white, it would have improved the game significantly. The game does autodetect and support Hercules graphics and looks rather nice, but squashed vertically, on my IBM 5151 dye to phosphor bloom. This port has no Tandy or EGA graphics support and no Tandy sound support. Shamefully, while CGA support composite artifact colors that were identical or very similar to the Apple II's composite artifact colors, this game made not even the minimal effort which would have been required to support them and equal if not better the Apple II version.
I kept an image of the disk's file display in the video. Why are there so many files? Why does this game, which comfortably fit on a single side of an Apple II disk (143K/side) get twice as large for the PC? One element driving up the file size is that the graphics are twice as large because they use 2-bits per pixel rather than the 1-bit per pixel graphics of the Apple II. The game does not support running from a hard drive, it uses a floppy disk based copy protection scheme.
Windmill Software was one such developer/publisher. At this time, the IBM PC, XT and most compatibles did not vary in speed, they used 4.77MHz 8088 CPU. The game was designed for this speed, and if it seems sluggish, remember that everything had to be done in software. The high score table's revolving colors only looks right at this speed.
Digger becomes a more fluid experience with slightly faster CPUs, but it will only run in a system with a CGA card or one that is fully compatible with CGA. It writes to hardware registers on the CGA card not preserved with later adapter standards. Windmill Software targeted computers that used high quality RGB displays like the IBM 5153 Color Monitor and used 4-color CGA mode. The game will be broken on most EGA and VGA cards.
In the early days of the IBM PC, these computers would usually be found in offices, they were too expensive to be affordable by the average consumer. Office workers would play games like these when the boss was not around. This game is rather difficult to find today and the popularity of the game meant it was widely distributed and better known through unauthorized copies than purchased ones.
Sound is rather impressive in this game, especially advanced Pulse Width Modulation technique which required CPU time to manipulate the square wave output by 8253 Timer Channel 2 the PC Speaker. In addition, CGA has no sprite hardware, so moving the player and the enemies and other objects on the screen requires significant CPU time.
I am playing Digger on my IBM PC Model 5150, which is as close to the intended hardware for the game as it gets. I decided against using a joystick and I used the numeric keypad of my IBM 83-key Model F Keyboard. My system has an IBM Color/Graphics Adapter, IBM Diskette Drive Controller and an AST Six Pack Plus card. Digger and other Windmill Software games only require 64K of RAM and I have ten times that amount in my IBM PC thanks to the Six Pack Plus. The graphics were captured via an RGB2HDMI and a Datapath VisionRGB E1s. The sound was captured by the equivalent of alligator clips connected directly to the PC Speaker.
I play the game twice, and the first game is clearly a warmup session. The object of the game is to collect all the emeralds in each level, but you can also win a level by eliminating all the Nobbins/Hobbins in the level. You can eliminate them with a fireball fired using the F1 key, but turning to aim is slow and the projectile takes time to recharge. You can also drop bags of gold on them to take them out and grab the gold which spills out of the bag for extra points. Finally, if you touch the cherries, you can eliminate your enemies by touching them as with a Pac-Man Power Pellet. There are eight levels but I'm not good enough at the game to make it that far.
The music is not original to this game. The main theme which plays during the game is the well known instrumental piece "Popcorn" by Gershon Kingsley. The death theme is from the Funeral March of Chopin's "Piano Sonata No. 2 in B-flat minor" and the music heard during the invincibility provided by picking up the cherries is the Finale to the "William Tell Overture" by Rossini.
In the early days of the IBM PC, these computers would usually be found in offices, they were too expensive to be affordable by the average consumer. Office workers would play games like these when the boss was not around. This game is rather difficult to find today and the popularity of the game meant it was widely distributed and better known through unauthorized copies than purchased ones.
As this game was developed for the IBM PC, I decided to use the brown color IBM used on its displays. IBM used a brown that was lighter in color than those used by Tandy monitors. IBM's brown is approximately at RGB 170,113,0 whereas Tandy brown is close to RGB 170,85,0. Monitors and capture methods that are not "CGA brown aware" will show dark yellow around RGB 170,170,0.
A technically-impressive game with solid gameplay like Digger was well-remembered in more recent times by the generation which grew up with the earliest IBM PCs and compatibles. The game was remade to be much less demanding on hardware compatibility in the late 1990s with Digger Remastered. Digger was also released for the IBM JX, IBM's obscure follow up to the IBM PCjr. This release may support the PCjr./JX's four channel sound chip, but the disk has never been imaged.
Even as all of these games originally had their music composed for General MIDI, going by the instrument choices in the game's MIDI files, some of these titles do not officially support General MIDI. Front Page Sports: Football plays no music at all when General MIDI is selected due to the same Dynamix sound system bug that also plagued "The Incredible Machine" and "Quarky & Quaysoo's Turbo Science". "Front Page Sports: Football Pro '95" and "Front Page Sports: Baseball '94" had General MIDI support disabled because the Human Machine Interface sound system annoyingly would have played PCM drums, intended for use only together with FM music, on top of the General MIDI music, a result that can still be achieved by manually editing the configuration file appropriately.
The Dynamix Logo is an exception. Being originally composed for Roland MT-32, it sounds very disappointing in its General MIDI conversion, which is why we present the original MT-32 version instead to better represent the composer's intent.
Recorded from 2x Roland SC-55mkII.
Front Page Sports: Football (1992). Music by Jan Paul Moorhead. (Song names are based on original filenames)
00:00 - Dynamix Logo (Original Roland MT-32 Version)
00:12 - Football Theme
02:26 - Walkin'
06:36 - Injns
10:30 - Teppin'
14:25 - WH Boy Funk
18:08 - Football Groove
Front Page Sports: Football Pro (1993). Music by Christopher Stevens.
22:25 - NFL Logo
22:31 - Intro Animation
22:39 - Football 1993 Theme
Front Page Sports: Football Pro '95 (1994). Music by Timothy Steven Clarke.
23:40 - Title Theme
23:58 - Opening Credits
Front Page Sports: Baseball '94 (1994). Music by Timothy Steven Clarke. The short in-stadium "charge songs" are not included, as they are more like sound effects than actual music.
25:19 - Sierra Logo
25:28 - Title Theme
26:55 - The Star-Spangled Banner
28:08 - Take Me Out to the Ball Game
Aces of the Pacific, Music by Jan Paul Moorhead:
00:00 Dynamix Logo
00:22 Main Theme
01:56 Menus
02:46 Flight Deck
03:33 Board of Inquiry
04:04 QUIETNSN
04:40 Death
05:09 Captured
05:43 Landing ok
06:52 Air Medal
08:23 News
08:53 Rumors (Japanese)
09:30 The War Has Ended (Japanese)
10:27 Rumors (U.S.)
11:13 The War Has Ended (U.S.)
11:57 Credits
Aces Over Europe, Music by Timothy Steven Clarke, Christopher Stevens:
13:20 Main Theme
14:34 Menus
15:34 Eject
15:59 Captured
16:26 Injured
16:53 Crashing
17:10 Killed
17:38 Air Medal
18:19 Credits
Song titles resemble the original filenames, even if the game uses the songs differently. As an example, Aces of the Pacific plays the song named "Rumors (U.S.)" during the credits instead of the song named "Credits". Some tracks may be unused. It is not known what "QUIETNSN" could mean, or where in the game that song plays. If you know, please let us know in the comments section, thank you!
There is some debate as to whether the music was originally composed for the Roland MT-32 or the Roland SC-55. We present the Roland MT-32 version after observing that the Roland SC-55 MIDI files make use of the SC-55's MT-32 instrument bank, and that the Roland MT-32 MIDI files play sound effects using custom timbres that have no equivalent in the Roland SC-55 MIDI files.
00:00 - Introduction
01:22 - Main Menu
02:32 - Main BGM
03:40 - Building a Castle
04:48 - Browsing Castle Designs
07:06 - Battle BGM
08:57 - Battle Lost/Dramatic Message
09:11 - Bad Ending
09:41 - Battle Won
09:55 - Emissary from the Church (positive)
10:10 - Emissary from the Church (negative)
10:27 - Diplomatic Emissary
10:45 - Generic Messenger
11:01 - Merchant
11:15 - Good Ending
"Emissary from the Church (positive)" only plays on the Roland MT-32; the SC-55 and Adlib versions play a duplicate of "Emissary from the Church (negative)" in those situations.
00:00 - Main BGM (by Hibiki Godai)
02:02 - Moonlight Sonata (by Ludwig van Beethoven)
MT-32 arrangements by Orpheus Hanley/Mark Seibert
This playthrough video is longer than all the previous ones. It feels like half of the game consists of playing video poker and watching cutscenes, too many of which with unskippable text windows.
Notes on the Playthrough :
The forbidden button in the escape pod is intentionally triggered to show the Easter Egg featuring Conquests of the Longbow.
The arcade sequence on Kerona with the speed skimmer is not skipped so a maximum score can be earned.
We chose to show a few more of the more interesting deaths.
We also wanted to show the mugger that appears outside the Rocket Bar if you are stuffed with money but the slot machine has not exploded yet. Without showing him, one would have no idea who the guy is who later shouts after you "Hey, where do you think you are going with my ship?" as you are leaving the planet.
The original TANDY320.DRV was modified to use different registers of the 6845 Video Controller (Start Address vs. H/V Sync Position) to provide the screen shaking effect. This was necessary as no known emulator properly emulates the original screen shaking method. The EGA320.DRV is slower than the TANDY320.DRV at the same speeds. The Kerona speed skimmer sequence takes longer with the EGA driver than the Tandy driver, so the Tandy driver was used for this game.
CGA, Tandy 1000 and PCjr. use the Motorola 6845 CRT Controller chip or integrate it into their graphics hardware. This chip controls the video timings that these graphics adapters use and its registers can be used to affect the horizontal and vertical position of the active display area of the screen. When the Horizontal and Vertical Sync registers are written to rapidly the result is that the screen appears to shake. Some CGA/Tandy/PCjr games will allow the user to set the screen centering manually and when they do this they will write these registers. No emulator seems to support these registers, not DOSBox, not 86Box, so when playing the game with the Tandy, PCjr. or CGA graphics types, the screen will not shake.
EGA, MCGA and VGA implement some form of decreasingly compatible 6845 functionality in their hardware, but the horizontal and vertical sync registers do not work quite like the older adapters. These adapters support higher graphics resolutions and faster horizontal and vertical scan frequencies. Instead, games like KQ3 cause the screen to shake by rewriting the start address register in these adapters. DOSBox and other emulators support this method, so playing these games with EGA or VGA emulation options will make the shake work as expected.
As you may have noticed, I am using a composite capture device to capture the Tandy 1000 TX's video instead of capturing the RGBI output. This is because the composite capture device (Dazzle DVC-100) I sometimes use is more resilient to rapid sync changes than the RGB2HDMI (as captued by a Datapath VisionRGB E1s). RGB2HDMI will drop frames during the shaking, the Dazzle will not. Even though the colors may not be ideal and the image not as sharp as RGBI, King's Quest III and other AGI games remain very playable with Tandy or PCjr. composite. These adapters do not use artifact color, unlike CGA, with these games. They use direct color generated (effectively) at the 3.58MHz NTSC color carrier frequency.
Notes on the Playthrough :
The intentional death shown from the mugger in the alleyway at the beginning was suffered intentionally to show off the Easter Egg. The beginning of the video through the Easter Egg was taken from an earlier playthrough which we decided to reject because it was less efficient, so this sequence is edited in before we start the playthrough normally.
The game relies on gambling, and if you lose all your money via gambling you will get a game over screen once you exit the slots or blackjack screens. Fortunately the game does not penalize you for "save scumming" and we use it here to save time. The Blackjack table is the better choice for raising money quickly as while the odds are in the house's favor Blackjack does not completely rely on randomness.
For getting a perfect score, you'd think Ken Williams would say something more positive than "You did OK, I guess."
Notes on the playthrough :
At 06:54 and 16:36 are edit points where the player would have to wait for several minutes for the timed events "Droid-o-Death Appears" and "Sequel Police Appears on Estros" to occur. This has been edited from the video, so that the aforementioned events appear to happen instantaneously. Hiding from the Droid-o-Death is necessary to obtain a perfect score. Having the Sequel Police appear on Estros is not necessary but provides a nice context for why a Sequel Policeman is dropped into the pterodactyl's nest immediately after Roger..
This playthrough is, to our knowledge, the only one that shows the full Sequel Police chase in the Galaxy Galleria Mall, including the encounter at the entrance (at 48:23) and the hiding from the Sequel Police in the Radio Shock store (at 49:00). Most people go straight from the arcade to the Skate-o-Rama, as the aforementioned entrance scene seen is extremely difficult to pass without getting zapped, and the Radio Shock scene no longer works at all in the CD-ROM version of the game.
The playthrough shows one intentional death due to the "travel to Ortega" easter egg.
As the graphics for King's Quest V and later games had been designed for 256 colors, in the 16 Color Version those graphics had to be converted or redrawn to fit in the limitations of 16 colors. The same pixel resolution, 320x200, was used and the music and sound drivers were generally the same between the 256 Color Versions and the 16 Color Versions. As my 256 Color Version playthrough used the MT-32 for music and sound effects, this 16 Color Version playthrough uses Adlib for music and sound effects. These versions of King's Quest V do not support Sound Blaster for digitized sound.
The 16 Color Versions come with graphics drivers for EGA, for Tandy and for MCGA. They all display identically but use incompatible 320x200x16 color modes. A VGA card can use either the EGA or MCGA driver, but you will only see 16 colors from this version of the game. It is possible to get the 16 Color Versions to display on CGA cards in 2 or 4 colors by copying over a graphics driver from another SCI game like Quest for Glory II or some of the earlier games.
Sierra released the following games with separate packages for 256 Color Versions and 16 Color Versions : King's Quest V, Jones in the Fast Lane, Space Quest IV, Leisure Suit Larry 1 (Remake), Space Quest I (Remake), Leisure Suit Larry 5, Mixed-up Fairy Tales, Conquests of the Longbow and Castle of Dr. Brain. All these games use the SCI1 engine. It has yet to be confirmed whether a 16 Color Version of EcoQuest: The Search for Cetus was actually released.
When Sierra migrated to the SCI1.1 engine in 1992 with games like King's Quest VI, it ended the practice of producing separate 256 Color and 16 Color Versions. For those games, Sierra included an EGA driver that used a 640x200 resolution and tried to simulate more than 16 colors via dithering. Tandy 1000 graphics support was dropped even though later Tandy 1000 graphics adapters supported a 640x200 mode with 16 colors.
This playthrough was recorded via DOSBox set to 4,000 cycles. The copy protection is intact and can be seen twice during the game, once at the witch's hut, once when pushing the boat into the water. The nuked OPL emulation option was used for the most accurate Adlib emulation possible. This version of 16 Color King's Quest V is v0.000.062
Reuploaded to show ideal pixel aspect ratio and correct for YouTube color space.
These versions are known as the "Enhanced PC Versions" because they support true 320x200 graphics in 16 colors. The earlier "unenhanced" PC Versions of both games used a 160x200 graphics mode in 16 colors for the Tandy 1000 as those graphics were ported from the Commodore 64 which was the original development hardware of these games. The use of a 160x200 graphics mode also made for blockier text on the Tandy 1000 than the Commodore 64 (which could change graphics modes mid-frame) or any other PC graphics mode (CGA, Hercules, EGA) which actually used or upscaled from a 320x200 graphics mode.
By the end 1988 when these versions were developed, Tandy had released nine models of the Tandy 1000, the original 1000, 1000 A, 1000 HD, 1000 EX, 1000 SX, 1000 HX, 1000 TX, 1000 SL and 1000 TL. The Tandy 1000 (1984), 1000 A and 1000 HD (1985) and the IBM PCjr. from which they were based all used a sound chip called the TI SN 76496, which offered three voices of square wave sound plus a noise generator. During the lifespan of the 1000 EX and 1000 SX, introduced in 1986, Tandy began also using a clone of the TI chip known as the NCR 8496. The two chips were more-or-less interchangeable and the EX and SX were very popular systems, so Tandy used two sources for its chips. For the next 1000 models released, the HX and TX in 1987, Tandy was apparently exclusively using the NCR chip in place of the TI chip. Then Tandy introduced the TL and SL models in 1988 and they used a custom integrated ASIC called the PSSJ (printer, serial, sound & joystick) which integrated the NCR chip and added advanced features to the sound chip.
The NCR chip differed from the TI chip in one important way in its implementation of the noise channel. When a write is made to the noise channel control register in the TI chip, the noise channel's linear feedback shift register is reset to 0s. The linear feedback shift register is the mechanism by which the chip outputs a pseudo-random sequence of 1s and 0s which sound like noise. (There is a minor difference in that different bits are tapped on the TI and NCR chips) On the NCR chip, a write to the noise channel control register does not reset the noise channel's linear feedback shift register. This results in music in games like Maniac Mansion and Zak McKracken sound "wrong" or "somewhat broken" when played back on the TI chip. It should be noted that the Tandy 1000s subject the audio output to a 4.8 KHz first order lowpass filter. ScummVM"s emulation of Zak's music is not quite right in its presentation of the opening's bassline, it does not take into account that a square wave period value of 0 actually means a period value of 1024.
When the PC Enhanced Versions of Maniac Mansion and Zak McKracken were being developed and tested in 1988-89, the fastest Tandy 1000s available were the TX and TL, which used Intel 80286 CPUs running at 8MHz. All the other Tandys used Intel 8088s running at 7.16MHz or 4.77MHz or for the SL and SL/2, an 8MHz Intel 8086. While these systems could be have a performance boost from an NEC V20 or V30 processor upgrade (8088 and 8086, respectively), they were nowhere near the performance of a Tandy TX or TL. While Tandy did release faster 1000s those systems were not available when these games were made.
The Enhanced Versions run a bit slow on the 8088 and 8086, so here is a sample of them running at their ideal speed with their ideal graphics and sound. The intro for Zak McKracken is particularly timed so that the music ends when Zak walks off the final screen with the giant face mask. The music for the non-enhanced version of Zak is identical and similarly timed on both the PC and the C64.
Apple II artifact colors are normally well-known, in the most common High Resolution Graphics (HGR) mode, they are purple, green, blue and orange along with two identical blacks and two identical whites for a total of six distinct colors. But the particular chroma-luma filter characteristics of the display can influence the actual colors produced in certain circumstances.
As the Apple II produces NTSC color, which piggybacks a color (chroma) waveform onto a monochrome (luma) signal to form (with sync) the video signal, it must be able to capture the color signal within the video signal by filtering out the luma. There are various methods which can perform this function, with more complicated methods resulting in fewer cross-color artifacts and sharper definition. Four such methods are demonstrated in this video.
HGR supports a visible resolution of 280 pixels by 192 lines. The Apple II does not support direct colors, a pixel is either on/white or off/black. Artifact color is shown by displaying single pixels, or an alternating series of pixels, and their position on the screen dictates the color. Two on or off pixels next to each other will show as white and black, respectively.
I have used a BASIC program which will display all 64 combinations of two color scanlines. The normal HGR colors are shown going diagonally down the screen. Four types of significant filtering is described below :
0:05 - Notch Filter
The first method is the simplest method, which uses a notch filter to recover chroma from the video signal A bandpass filter at 3.58MHz filters out most of the luma components of the signal, then the recovered chroma is subtracted from the composite video signal to recover luma. Cheap modern CRT TVs will use this method as will most TVs from the 1970s and 1980s and all color TVs before then. I do not have a capture device that only uses a notch filter, but AppleWin's "Color TV" display mode represents the notch filter method more or less satisfactorily. The result is that when there are instances of alternating lines of color, those colors will remain distinctive alternating lines. An Commodore 1084 monitor uses a Notch Filter.
0:38 - AppleColor Filter
This demonstrates what the domestic AppleColor Composite Monitors IIe and IIc show. AppleWin's "Color (Composite Monitor)" display mode is being used here. These monitors have a unique method of decoding composite video. After chroma is recovered from composite using the bandpass filter, this method uses the recovered chroma for luma. In this case, chroma is being used for both the chroma and luma signal instead of luma being recovered. The result is always distinctive alternating patterns of bright and dim colors. It should be noted that 80-column text on these monitors is more readable than with other monitors with color enabled. The "International" versions of these monitors sold in Europe and Australia use a regular Notch Filter.
0:51 - Chroma Comb Filter
This method was a significant advance on the notch filter. With a comb filter, one scanline is held and compared to the next and the chroma tends to cancel each other out, or at least that is what it would do if the Apple II inverted the phase of the color signal every other line as it should with canonical NTSC video. The color signal phase is not inverted with Apple II video, so the result is not ideal. This filter only eliminated cross-color artifacts without restoring the luma detail. The result of this filter on Apple II video is a blending of colors together to show more color than what is normally seen on an Apple II in the High Resolution Graphics mode. Where colors with complimentary phase offsets are above and below each other (purple and green stripes or orange and blue stripes), the blending will produce gray. If you had a high end monitor or TV during the 1980s, you may have seen this. This is a capture from my Dazzle DVC-100 and I see it being used on my Insignia IS-TVDVD20A.
As you can see in the combination blocks for this image, four additional colors plus a gray can be decoded and seen with the most appropriate filter. The downside to this, other than the need for a filter, is that you must use at least two lines of graphics, which reduces detail.
1:01 - Chroma Comb Filter with Luma Recovery
This method is an even more advanced of filtering used on CRTs, but it would not have appeared until the Apple II's twilight years. Building on the simple chroma comb filter, this filter restores the signal components that were eliminated from the chroma channel back into the luma channel. The added luma components allow the filter to show checkerboard black and white, which is not an unreasonable interpretation of the original signal. This is a capture from my I-O Data GV-USB2 and I see it being used on my Toshiba 27AF45 (without the sparklies in the blended color squares).
Berzap! is an (unauthorized) clone of Berzerk for the Apple II, released in 1984 by John Bradley ("Captain Infinity"). In addition to playing a pretty good game of Berzerk for a game with no hardware sprites, it supports music and sound effects via the Mockingboard cards. But to make it as close to the original Berzerk and its famous speech synthesis, Berzap! supports the speech chips which could be found on the Mockingboards.
The Mockingboard supported two sound chips, the older Mockingboard Sound/Speech I used the Votrax SC-01 and the Mockingboard C used the more advanced SSI-263. The chips are incompatible with each other even though both were designed by Vortrax. Games support one chip or the other chip except for this one, which is unique in that it supports both chips. The SC-01 found uses in certain pinball machines as well as arcade games like Q*Bert and Gorf. The SSI-263 did not find many other consumer-friendly uses.
By pressing Ctrl-C, you can change the "Noise Production", and five options are given. I will give the timestamps where each option starts :
0:00 - The dreaded "Apple Speaker"
2:40 - Mockingboard™ Sound 2 or Mockingboard™ "A"
4:57 - Mockingboard™ Sound/Speech (with original Votrax SC-01)
7:51 - Mockingboard™ Sound/Speech with (SC-01 Replacement Emulator Board)
11:16 - Mockingboard™ "C"
I have ReActiveMicro's clones of the Mockingboard A and Phasor in my Apple IIe. I am using a Gravis PC Gamepad with the Manila Gear PC to Apple joystick converter for far more precise control than using an analog joystick or the keyboard controls. The game loads faster when run via Total Replay than disk image, so I am using Total Replay for running the game via a wDrive and SoftSP card.
For the sound, as you might expect the Apple Speaker option has no music but has sound effects only heard via this option. I am using an "alligator clip" method which taps the Apple Speaker input directly.
The speech-less Mockingboard options try to play music out of one speaker and sound effects out of the other speaker, but these cards suffer from channel bleed. There is one sound effect that is still provided by the Speaker, namely the scream that is heard when you lose a life. I had a separate audio cable for the Speaker instead of routing the Speaker audio through the ReactiveMicro's Mockingboard Speaker connector.
I recorded the Sound/Speech option twice. My Mockingboard has a daughterboard inserted into one of the sockets for the SSI-263 chips to adapt the SC-01 chip (which uses a smaller number of pins). The first recording is with the genuine chip, the second recording is the emulator found here : http://www.virtualnextpoint.it/pinball/sc01.php I kept the volume and pitch pots on the daughterboard at the same settings for both recordings. The Apple Speaker is not used for this option, and music is not supported. The original Sound/Speech I chip had only one music/sound effects chip (AY-3-8910), so there were insufficient voices for both music and sound effects. You do not see Evil Otto trashing your performance without a speech chip.
For the final recording, I swapped out the Mockingboard for the Phasor, which has the SSI-263 chip in one of its sockets. The Phasor has better channel separation than the Mockingboard. The Mockingboard C had two music/sound effects chips (AY-3-8913) and has the voices to express both music and sound effects at the same time. The SSI-263 does not have external pitch and volume adjustments like the SC-01 but can be programmed with far more varied pitch, inflection and phenome delay options compared to its predecessor.
For video capturing I am capturing the Apple II's composite video output with very little in the way of tweaking. My Dazzle DVC-100 was an inexpensive composite/s-video capturing device intended to digitize VHS tapes, but this video shows off its hidden strength in capturing NTSC composite artifact color. This device has a comb filter to eliminate cross-color artifacts, and its filter is a simple one. The color cycling in the Berzap logo on the title screen shows different hues by alternating lines of two artifact colors. As a result of the Dazzle's simple comb filter, a new shade of color is shown rather than alternating lines. More advanced capturing solutions use adaptive comb filters but such comb filters tend to be overly aggressive, were rather rare in the 1980s and thus not ideal for this kind of content.
While the game has 15 levels or "floors" normally, you can get to the Spaceport on Level 15 by pressing Return or Ctrl-M when on a screen and exiting the door on the right side of the screen. You can get to the mini-boss "Junior-Executive-Pool" on Level 10 by pressing Tab or Ctrl-I and using any door but the right door to exit a screen. Ctrl-@ turns on infinite lives.
This ProDOS conversion eliminates disk swapping and most load times and still works on a 64KiB Apple II like the original game did. It fits onto a single 800KiB ProDOS image, so it cannot fit on the standard 5.25" floppy drives. For original hardware, you need a solution which can boot SmartPort devices. In my case I am using a wDrive, which can simulate regular floppy disks as well as SmartPort volumes up to 32MiB in size. Note that my Apple IIe is Unenhanced but has 128KiB of RAM.
The Apple IIe with a Disk II Controller Card can only boot from 140KiB floppy disks, it does not have SmartPort firmware needed to boot from larger volumes. I have another card, the SoftSP card, installed in my Apple IIe which provides the firmware so the Apple IIe can boot SmartPort volumes. In this case, the wDrive can work as a fully-functional SmartPort device (boot, read & write) over the Disk II Controller Card's interface, a feat which the card was not designed for. Despite the Disk II Controller being much slower than a Liron or Yellowstone controller, it can be much faster than you may expect when paired with custom disk routines as this conversion uses.
I have already demonstrated the original Apple II version of Ultima IV here running off floppies : youtube.com/watch?v=oYGFh3I3IG4 I purposefully did most of the same things in this video to give a reasonable comparison. Other than the conversion, the Mockingboard music is coming from ReActiveMicro's Mockingboard clone instead of its Phasor clone. The Apple Speaker is being sent through the sound card. The video was captured through an RGB2HDMI device, so its rather basic form of artifact color presentation is used.
The C64 is an NTSC breadbin model, Assy 250407. The video image from this board is softer than its predecessor or its successors. Adrian Black showed a mod which involved the severing of a pair of components in the RF modulator box and the bridging of two points which removes the overly soft filtering of the video signal. youtube.com/watch?v=Qb9n6S4cKuk I did this mod to my system and was pleased with the results overall.
You can see in my earlier C64 videos this filter at work for both Composite Video and S-Video captures. So I have used an S-Video connection for this capture. I did use a smoothing filter during the video processing stage to eliminate most of an ugly checkerboard pattern which can be seen from the raw output on the capture and mitigate the jailbars a little. I also boosted the saturation of the color by 150% because the C64's colors look muted with a middle setting.
The audio is being provided by the Ultimate-II+ cartridge, as I do not have a working SID in this machine, as are the disk drive sounds. I decided to use preservation-grade g64 disk images as they would give me the most consistent results. I could not find a preservation-grade g64 disk image for Cybernoid and did not have the patience to try and make a cassette that could be loaded, so I used a .crt conversion. I left the load times in so you can get a feel for accurate C64 disk drive loading times. However, I will also give the times when the game finishes loading so you don't have to wait :
Cybernoid - 00:06
Impossible Mission - 07:42
Uridium - 13:10
Tower Toppler - 15:51
Jumpman Junior - 21:06
As I do not have an 8-pin DIN to VGA cable to connect to my Datapath E1s, I used the HD RetroVision Genesis Component cable with the adapter for modded NEC consoles. Even though the Genesis Model 1 and Sega Master System use an 8-pin DIN, they use the horseshoe shape while the Turbo mods need the circular shape and have a different pinout. Composite video is used for sync in my console, it can still output a composite video signal, so it may be a bit noisier than if I relied on pure sync. My Datapath would need a sync stripper circuit to receive RGB input, it will not accept composite video as sync.
I died several times on Level 6 to the point of having to use a continue, so I edited out the unsuccessful attempts to complete the level in order to save time and video size. That is why the score reverted to 0 after Level 5. Level 6 is the most random part of the game, making its boss harder than the final boss.
This Atari 400 is running off its stock video and audio circuit, which supports RF output only. Ultima III on the Atari uses artifact colors like it does on the Apple II and IBM PC. However, games using artifact colors were generally designed with the Atari 800 in mind, which uses a video circuit which provides composite video and separate luma and chroma in addition to RF output. Every model of the Atari 8-bit computers will show different NTSC artifact colors. Atari 400s show red/green but Atari 800s show blue/green, which is what Lord British intended.
In order to give an idea of what the Atari 800 would show, halfway through the video I have altered the hue to show what the colors would look like on an Atari 800. I could not do this with the capture card, its range is too limited, as are most TVs. I used VirtualDub's hue control, which has full range controls.
The audio playback routine sometimes goes directly to the next track, but other times requires a cycle of the main menu to go to the next track. Some themes repeat for a bit as a result. As you can hear, Chuckles clearly struggled to bring the music from the Apple II Mockingboard to the POKEY of the Atari computers but within those limitations the soundtrack is complete, unlike his conversion for the C64. I apologize for the Slack notification sound heard during the first few seconds while the game is loading.
Track Listing :
Wanderer / Sosaria & Main Menu View Theme - 01:15
Towns - 03:27
Lord Cantabrigian British's Castle - 04:31
Dungeons / Ambrosia (Washed Ashore) - 05:27
Combat - 05:53
Shops - 06:45
Castle Death - 07:24
Fanfare / Rule Britannia / Lord British's Theme - 08:25
Alive / Shrines / Time Lord / Final Victory - 08:41
Ambrosia (Post-Shrine Entry) - 09:04
My friend decided on using the EGA graphics driver over the Tandy graphics driver as it does not show mid-frame screen tearing and also has some lightning effects on the credits screen lacking with Tandy. In his opinion, the Tandy PSG is superior to the Adlib arrangement, so he played the game with that sound driver.
There are a few differences once you get into the game. Boss music is not played for normal bosses. The music for stages 4 and 5 on NES are swapped here. Dracula's health bar is glitchy in his first form if you collect the holy water after inflicting damage and the holy water will not stun his second form. There is no harder "second quest" after you beat Dracula.
Not shown is a game breaking bug where if an axe knight follows you all the way to the screen where the Grim Reaper appears, the Grim Reaper will appear and the axe knight will disappear, but when you defeat the Grim Reaper the game will not progress further.
The same company which brought us the PC port of Castlevania, Unlimited Software Inc., brought us this TMNT port. In Europe the game was released as Teenage Mutant Hero Turtles, the franchise's then European name.
I have it on my bucket list to beat TMNT for the NES legitimately without resorting to cheats, but I do not have the patience to do the same for this buggy, unfair piece of crap. To turn on the invincibility cheat in this game, press Q, R and P on the keyboard at the same time, and press them again to turn it off. You will see the word "ON" or "OFF" appear on the bottom of the screen when you do this successfully.
The main issue is that your characters have huge hit boxes and there is no temporary invincibility when you get hit. This can lead to you losing all your lives very quickly. Your turtles have rather short attack ranges and the enemies move fast. If you need to hit an enemy a second time to kill it, you will often take a hit as well. Boss music does not play until the Level 4 boss.
Unlike the NES game where there was some semblance of balance between the speed, range and power of each turtle, here things are very simplistic. Leo has good range but the weakest attack, Raph has a slightly stronger attack than Leo but short range, Michaelangelo has a stronger attack than Raph but is still short in the range department, Donatello has the range and the attack power. There are no low-health strength boosts for certain turtles' attacks in this port.
Enemies almost never drop weapons and there are only two fixed weapon drops in the whole game. Some spots where you can rescue captured turtles in the NES game lack the turtles here. Enemy spawning is often unfair in that when you start a new location, they are thrown at you with no chance to dodge, and enemies can continually respawn if you scroll the screen into and out of a scroll point without killing the existing enemies.
One of the few good things about this port is that Level 2 is much easier than it is in the NES version, both the dam building and the underwater bomb deactivation. You have the ability to jump high enough to reach the door to the top of the dam by ducking and then jumping. Level 1 is much harder than the NES version because Bebop and Rocksteady are much more difficult to defeat.
I have noted that this is a Version 2.0 playthrough. When this port was originally released for the PC in the USA, Level 3 had an area which required an impossible jump, making the game impossible to complete without the walk through walls cheat. Unlimited Software fixed the bug in time for the European version of the game, but it is an untrue assertion that this bug fix was never made available to US players. There are copies of the game with a Version 2.0 designation on the box and the disks, but beware of budget "Slash" re-releases. They may say Version 2.0 but come with Version 1.0 files instead. Ironically the jump which was fixed is the easiest jump to make in that sewer. I forgot that the turtles could walk over the one-block gaps, which meant to many times having to retry this part of the stage. The fix to Level 3 and the installation program are the only differences between Version 1.0 and 2.0. The European release has almost no differences from the US releases beyond the distributor credit and the need to replace "Ninja" with "Hero" in both title and text.
To turn on the walk through walls cheat in this game, press A, S and G on the keyboard at the same time, and press them again to turn it off. You will see the word "ON" or "OFF" appear on the bottom of the screen when you do this successfully. I found another area in Level 3 where it was possible to get stuck due to the bad placement of tiles in a sewer level and had to use it to get out of the area.
The keyboard controls are a bit annoying. The directional keys move your character, pressing Spacebar attacks, Enter jumps, Escape brings up the map and turtle selection screen and Tab changes weapons and enters/exits the Party Wagon. I used the joystick, which at least has two button support, but I still had to press Escape and Tab at times.
You can plug in accelerators into the TL's 286 socket which will give this system in the neighborhood of midrange 386 performance, but those come with their own drawbacks and were not available for years after the release of the Tandy 1000 series.
Now you might ask that with a system with a 16-bit CPU that runs over 4x the speed of the NES's CPU and has many times the amount of memory available to the game, why does Castlevania run so poorly on the Tandy? The Tandy Graphics Adapter has no hardware that allows for hardware scrolling and no sprite capabilities and has to brute force those functions via nearly full-screen redrawing of the frame when movement is happening. The NES can handle smooth per-pixel scrolling and multiple sprites in hardware.
Dialing down to CGA graphics may improve performance, but if you have a Tandy, what's the point? EGA graphics do not suffer from screen tearing, unlike Tandy graphics, but the scrolling is not smooth and the game is not notably that much faster. You can install an EGA or a VGA card in almost all Tandy 1000s, but it was not a popular option at the time. I load a few programs beforehand that are intended to boost performance, but I don't believe they had much effect on this game.
For some reason an echo got into this video and a few previous videos, I think I have found the problem and it should not happen again.
and one on a Genesis : youtube.com/watch?v=creDKP43oCI
but here is the effect on an original Sega Master System via its composite video output. The composite video output is the best output the Master System "officially" supported, but RGB is also available (not not nearly as interesting for this video). The FM audio is from a real chip via the SMSFM mod.
The built-in games come from Epyx and Hewson (and one contribution from Image Works). In reality there are only 23.583 unique C64 games on this device, two of the events were taken from California Games (which has six), two from World Games (which has eight) and World Karate Championship's first and second journeys were split into separate entries to pad the list out to 30.
I have tried five games in this video, Cybernoid, Impossible Mission, Uridium, Tower Toppler and Jumpman Jr. Cybernoid, Tower Toppler and Uridium were developed in the U.K., the others are from Epyx in the USA. I found the three PAL-original games to be fairly reflective of the others in this device, they seem to play too fast at NTSC speeds. Tower Toppler I could give a slightly better account of myself because I've been playing a fair bit of it recently. If I could have used a gamepad instead of a joystick, I think I could have gotten past the first level in Cybernoid. These games are almost completely without mercy at 50Hz let alone 60Hz. I never really understood Impossible Mission, but Jumpman Junior is easily one of the few games on this device I want to play and has fair (if hard) difficulty.
I edited out the full reset sequence, which boots into C64 BASIC every time you press the reset button, after I reset the console once.
I am not a huge fan of the joystick, it uses membrane carbon contacts like the Atari Flashback 2 joysticks and the NES Advantage. The device runs on 4xAA batteries and no AC adapter input, but seems to last a good amount of time on a fresh set. The terminals in my device were hit hard by battery leakage, had I known about it I would not have bought it. Fortunately white vinegar saved the terminals enough to revive them.
I know this device can be less than a perfect simulation, not unlike the Flashback 2. The video has a shimmer that I have never seen from my C64s VIC-IIs. The simulated SID makes no attempt to simulate the analog filters. Uridium does not have a constant buzz on original hardware as it does here. I know you can mod these things but I prefer to keep things stock, especially when I only have one of them.
I am recording the Odyssey 100 via the same method as I recorded Pong as it also has a speaker built into the unit and only outputs RF-modulated video. You can hear background noise, including me manipulating the console. Unlike Pong, which has a pair of dials, a reset button and an on/off switch accessible without opening the machine, the Odyssey 100 has three control knobs for each player, an on/off switch, a game select switch, a ball speed dial and center/left line position dial. Opening up the bottom of the unit, which is necessary to add batteries, allows you access to the channel select switch, the speaker on/off switch, and seven more dials to control the video signal.
The Odyssey 100 is like the original Odyssey's tennis game in that it allows each player to control the paddle horizontally and vertically. You can put each the paddle anywhere on the screen. Each player also has a "spin" or "English" control that allows them to control the trajectory of the ball after they hit it. Only the player who hit the ball last will be able to affect the ball's path via the spin control. This control scheme is inherited from the Odyssey and would be eventually phased out of the line.
There are a few differences from the original Odyssey. The paddles are more rectangular and the ball is served not by pressing a reset button but by the player who lost the serve touching the center line with his paddle. The ball will rebound off the top and bottom of the screen instead of disappearing as with the Odyssey and needing to be reset. The original Odyssey was silent but 100 allows a single chirp when it strikes a paddle.
The Odyssey 100 also has another functional improvement over the original Odyssey. The game select switch, when changed from Game A to Game B, allows for something like a Hockey game. Here instead of a single net there are two walls and the ball will bounce off of them. A player who has had the ball go through his "goal" in this variation touches a wall to have the ball served. As the scoring opening is much smaller than in tennis, the ball speed dial can increase the speed if the ball to increase the challenge. The center control knob is necessary to be used to adjust the position of the left wall and would also need to be adjusted to recenter the net when going back to Game A. The original Odyssey could only indicate scoring by the TV screen overlay.
I am trying to play against myself, but it is much more difficult to do with the Odyssey 100 than Pong due to the three dials and the fact that the position of the vertical and the spin controls are swapped in position for player 1 versus player 2. I try to show everything the console can do, how it can change the movement of the ball, how serving works, how the ball speed can change, and the transition from Game A to Game B.
The music in this game beset by several oddities. The game resources contain both MT-32 and General MIDI sound files. The MT-32 sound files in some places seem like early drafts of the respective General MIDI files. Some songs are completely missing in the MT-32 sound resources such as the music to Runt's first conversation with Sordid, which plays in silence. This suggests that the composer did not have music ready for that scene before switching his efforts to General MIDI compositions. The General MIDI sound files on the other hand use MT-32 drum note key numbers to trigger instruments such as "Quijada". Both versions' MIDI files contain absolutely no panpot information; the game's sound drivers plays them all in the center, but there is some circumstantial evidence from the choice of MIDI channels that the MT-32's power-on default panpot positions are supposed to be heard.
The game uses the MT-32 sound files both when selecting Roland MT-32 *and* General MIDI in the setup program. The latter is obviously a mistake. The General MIDI sound files are used when selecting the OPL2, OPL3, and Gravis Ultrasound output devices in the setup program. The game can be forced to use the General MIDI sound files with the General MIDI setup selection by deleting the (otherwise empty) file "MIDI" from the directory that the setup program creates.
This recording attempts to represent what is thought to be the composer's intent by taking these observations into account. The General MIDI sound files are played through a Roland SC-55 mkII, but with default MT-32 panpot positions, and using the MT-32/CM-32L drum kit. The sequence of songs roughly represents a plausible order of actions to complete the game, although some songs were moved around so that all parts of a multi-part song are played together, retaining their original subsong sequence (e.g. "Castle Gate" playing A-B-C-B-D-B-E).
0:00:00 - Prologue: Runt's Recruitment
0:03:08 - Sordid's Castle
0:04:13 - Yellow Pool Talk
0:05:46 - Main Title
0:06:23 - Opening Credits
0:08:18 - The Magic Wardrobe
0:09:51 - Your Task
0:11:00 - Calypso's Shop
0:11:37 - Town Map
0:12:48 - Dancers on Town Square
0:14:59 - Castle Gate
0:17:04 - Street of Traders
0:18:33 - The Docks
0:19:29 - Goldilocks
0:20:33 - Um Bongo and Dance
0:21:51 - Sad Jokester
0:22:52 - Loan Office
0:24:56 - Meanwhile, Up on the Roof
0:25:23 - Three Bears' Cottage
0:26:17 - Home of the Three Bears, Lighting the Fire
0:29:21 - Water Fountain
0:30:46 - Back Alley
0:31:43 - Insane Society
0:33:07 - Sewer with Giant Spider
0:33:57 - Bungee Jumping in the Swamp
0:34:48 - Outside MucSwampling's Restaurant
0:36:33 - MucSwampling's Restaurant
0:38:18 - MucSwampling's Kitchen
0:39:28 - MucSwampling's Office
0:40:31 - Joke Seller
0:41:40 - Magical Lamp Cave
0:43:13 - Pet Store
0:44:23 - Outside Magic Contest Tent
0:45:49 - Waiting for Your Turn
0:48:56 - Magic Contest
0:50:00 - Tattoo Parlor
0:51:34 - The Lady of the Lake
0:52:34 - The Sword in the Stone
0:53:38 - Young Prince Peashooter
0:54:51 - The Throne Room with the Royal Seal
0:57:23 - Castle Corridor
0:58:08 - Royal Nursery
0:59:13 - The Princess and the Pea
1:01:23 - A Lolly for Little Swamplings
1:02:25 - Tower Demons
1:03:20 - Floating (and Falling) Outside the Castle Window
1:03:52 - The Tower Upstairs
1:04:59 - The Treasury
1:06:09 - The Kidnapping
1:06:45 - The Pirate Ship
1:09:02 - Chuwumba-Wumba Island
1:10:38 - Island Cafe
1:11:59 - Sharp-Dressed Dealer
1:12:55 - Limbo Contest, or The Torture Machine
1:13:44 - Cave of the Drunk and Sober Genie
1:16:39 - Back at Calypso's
1:17:40 - Intermezzo
1:20:18 - Big Goblin Tent
1:20:43 - In a Jail Cell
1:22:57 - Outside the Cell
1:23:28 - Outside Goblin Camp
1:24:33 - Island Map
1:25:26 - Dark Woods
1:27:02 - The Witches of Graeaeaeaeaeaeaeae
1:28:13 - Secluded Hut
1:29:35 - Volcano Rim
1:30:40 - The Woodworms
1:31:22 - Flying Dogs Talking
1:32:07 - Castle Entrance Hall
1:33:00 - Unpronounceable
1:34:10 - Wheel Room
1:37:41 - Sordid's Laboratory
1:39:50 - Sordid's Mother
1:40:51 - Epilogue
I am playing against myself, with one hand on each knob. The video from the console is RF only and is being recorded via the composite video out of my Insignia IS-TVDVD20A. This TV is a 20" CRT with a built in DVD player, composite and component inputs and composite output. Like a VCR, the TV will convert RF input into composite video output. This makes it very handy to record consoles with only an RF or composite input. I cannot blame a laggy capture window for my mistakes!
As the speaker is inside the console with no easy way to tap its output directly, I decided to record the sound from the console using a binaural microphone nearby. I used noise reduction in Audacity to reduce the background noise, but you will hear some "life sounds", including the console being switched on and off.
The boxes that appear before a game starts and once a game is finished (15 points) is called the "Light Show" and is normal. The movement pattern of the squares is somewhat randomized.
The floppy disk of Oil's Well for the IBM PC was imaged a long time ago, but there was a problem with the data. The disk was damaged in those sectors which defined the PCjr. graphical patterns and colors, so the game was unplayable on the PCjr. Only the PCjr. title screen could be displayed and the game itself could only be played in the PC composite CGA mode.
Fortunately a new disk was very recently dumped from a sealed copy auctioned off on eBay. I was asked to record a playthrough on the my IBM PCjr. to show the game with its best graphical mode and at its proper speed. Because an unexpanded PCjr. runs slower than a PC, the game takes account of the speed difference when run on the PCjr. Here is that playthrough, all eight levels of the game and the "winning" screen are shown. I used a cheat version which game me 99 lives so I could finish the game and show it all off.
I found that using an analog joystick was essential to beating the game, especially when the game starts using multiple tight corners. The analog stick allows for more finer control of the pipe extension and the joystick button allows for slower pipe retraction compared to the joystick. Here are timestamps for the start of each level.
Level 1 - 1:28
Level 2 - 2:56
Level 3 - 4:32
Level 4 - 6:40
Level 5 - 10:18
Level 6 - 15:59
Level 7 - 21:29
Level 8 - 24:50
The game will loop from Level 8 back to Level 1 and I decided to end the video instead of waiting until all my remaining lives were lost. The game only displays symbols (those blue Cs) up to 10 lives. It is just as well, as I was so frustrated trying to play the game with a keyboard that I had lost all 99 lives by level 6 and what I typed in as a name on the high score screen was not fit for young people and those of sensitive dispositions.
Music composed by "Arfing Dog", produced by Michael Lindner.
00:00 - Main Title
01:02 - The Attic
01:54 - Miss Minnie Beancounter
03:16 - Simulation Lab
03:58 - Class at Meltingwolf Hall
04:15 - Party at I Phelta Thi
05:57 - Party at Tappa Kegga Bru
07:11 - Sexy Times
08:04 - Graduation Nymph
08:49 - Horse Racing at Sorcerer Stadium
09:10 - Housemaster's Suite
10:30 - Fizzbuttle Ocean
10:54 - The Island of Lost Soles
11:45 - The Island Where Time Runs Backward
12:29 - Parade Ground
13:05 - Garden of the Gods
14:03 - Stunning Climax
14:41 - BIP Spell
15:01 - Unknown, possibly unused
When the 320 pixel mode was used it could display predictable artifact colors because its pixel clock was 2x the NTSC color frequency. The 7800 also allowed for control over the colors the system directly produced with a palette of 256 colors, influencing the artifact colors much more so than an Apple II, which only outputs white pixels. Given that the 7800 could draw from a palette of 256 directly-generated colors, this ability could have been very versatile.
Unfortunately the 320 pixel mode and artifact colors were almost never used in commercial games during the 7800's commercial life. The only game that actually uses artifact color for gameplay is Tower Toppler, (originally known as Nebulus for the C64 and later Castelian on the NES) the game demonstrated in this video. Jinks uses artifact color for its static menu screen, but its actual gameplay uses 160 pixel mode.
Playing Tower Toppler on a PAL 7800 or an NTSC 7800 modded for S-Video or RGB is much less colorful experience because those signals do not decode high frequency luma as chroma, the key to artifact color in an NTSC composite or RF signal. In those display modes, the graphics will look very stripey. Then again, if you are in a PAL country, you really should be playing Nebulus on a C64, the experience is so much better than this port.
The bonus stage does not use artifact color for its gameplay, it uses 160-pixel mode, so only directly generated colors are visible. Tower Toppler has a stage select function. By setting the right difficulty switch to one position, the game will automatically cycle through levels, so you wait for the level you want to begin, then set the switch to the other position to play that level. I use this function to show some of the later levels.
The 7800 in this video has not been modified, I am capturing its RF output (the only output the 7800 provides) through a VCR, which converts the RF to composite video, which goes into the GV-USB2 capture device. The VCR has the benefit of also providing RF output, so I can play the game on a display that is not laggy like the capture window can be. I am not great at the game and I am using a Atari Flashback 2 joystick, the most precise 9-pin controller I have which does not require a power source. RF has noisy video, and I tried my best to reduce the audio noise without altering the sound. Best not to listen to this video at full volume. 60p capturing is available at 720p and above resolutions, something no other video I know of this game shows as captured on original hardware.
I have tried to make this video a "reference video" for the 7800 and its artifact color. To this end I have resized it to a 10:11 PAR to reflect what an Atari 2600 or 7800 should show. I have also ensured that whites are at or close to RGB values 255,255,255 and blacks at or close to 0,0,0 so one obtains a full range of color. Color is a little subjective because this is NTSC color we are dealing with, but I believe this color is well within the range of acceptable NTSC color reproduction.


