Ed SA follow up on my previous video with Amplitube.
I like Amplitube a lot and have used it for years. Its taken me a long time to realise why I always had mixed experiences with it, and a HUGE area that they can improve is how they deal with input levels.
The AFD amp model was one I was always excited about but I could never really get good results from it. After I tried the model in Mercuriall Spark and the Axe FX, I thought I'd revist Amplitube and see if we can get a similar response.
Its 2024 and Amplitube is still brokenEd S2024-06-29 | A follow up on my previous video with Amplitube.
I like Amplitube a lot and have used it for years. Its taken me a long time to realise why I always had mixed experiences with it, and a HUGE area that they can improve is how they deal with input levels.
The AFD amp model was one I was always excited about but I could never really get good results from it. After I tried the model in Mercuriall Spark and the Axe FX, I thought I'd revist Amplitube and see if we can get a similar response.
This is how I did it:1992 Block Letter 5150 NAM Demo - METALCOREEd S2024-08-17 | Dug up some multitracks from my band in 2009 for this demo. NAM model and IR are in the video. I also blended some of the same NAM model on the bass tone.
mirrorprofiles.myshopify.comAnother Bogner Uberschall Rev Green - (NAM) DemoEd S2024-07-09 | ...DI Comparison - Avalon U5 vs Neve vs UAD Apollo vs Axe FX vs Focusrite ISAEd S2024-07-07 | There's a lot of DI comparisons out there, but I'm not sure how many people are matching the levels of each. As we know, a slightly louder or quieter tone is going to influence the sound of the amp quite a lot.
I've made sure to match the levels to within 0.1dB here. I've also included one clip of me playing directly into the amp without a DI box at all.
Which sounds best? which sounds worst? which are most similar?
0:00 - Intro 0:12 - DI 1 0:40 - DI 2 1:08 - DI 3 1:36 - DI 4 2:04 - DI 5 2:32 - DI 6Mercuriall 1987x - Jose Modded Marshall Plexi Plugin EmulationEd S2024-06-30 | I'm partial to a modded Marshall, and the Jose mods are rightfully considered the pick of the bunch. Mercuriall have recently released this 1987x which can offer some stock 1987x tones on the top inputs (and MV cranked) to modded high gain sounds (an extra gain stage added when using the bottom input).
I think this plugin is best suited for more old school "fat" tones than modern high gain stuff - its really cool for a take on a 50W Marshall Lead head.Mirror Profiles Brit T75 High Gain Nu Metal IR DemoEd S2024-06-03 | Just a quick demo showing the Brit T75 IR's. Guitar amp is one of my JEL NAM models, IR shown above.
You can buy both of my IR Packs (Brit T75 + Eighty Four) for just £10 this month:
mirrorprofiles.myshopify.comWhy you SHOULDNT record at -18dBFSEd S2024-04-30 | Part 2 to my previous video, you should watch that one first.
Apologies for the click bait title, your fault for being on youtube I'm afraid.
This video is boring, and may require a few repetitions/pausing to fully understand. Take your time and it should all make sense.
BTW, this concept is similar to the guitar DI gainstaging video, but with some very crucial differences. Guitar DI's (usually) don't pass through mic preamps and line amps, they are intended to hit the pedals or amp at the level they leave the guitar at. Compressors and EQ's and tape machines are different because they expect to be used with a variety of different input levels.
0:00 - A 2:05 - B 4:10 - CUAD Apollo vs Analogue - Mic Preamp ShootoutEd S2024-03-31 | Bogner Uberschall - Mesa OS Cab - sm57 UIII - preamp
Mix example just has some processing on mix bus, isolated examples are as captured from the mic.
No processing/EQ on the signals, just normalising to the same volume.
Which do you like best?
You can download raw examples here: https://we.tl/t-qgcjZw4QWd
0:00 - Mix Example 2:08 - A 4:05 - B 6:02 - C 7:59 - D 9:56 - E 11:53 - F 13:50 - GKrank Revolution Series 1 - NAM DemoEd S2024-03-16 | Guitars are from a NAM model I made of a Krank Revolution Series 1 (using a Mesa cab load).
Turns out, this one sounds a lot more to my taste. Its more scooped, bigger lows, brighter highs. Not sure if thats down to impedance curves/poweramp modelling, or just whether they are based on different versions of the Ecstasy as the circuit has undergone different changes over the years.
Either way, looks like I'm going to have to buy it.
IR's here are from my RENGOB 2000 IR pack - 16 ohm V30's from 2000 in a beautiful Bogner cab. Pairs so well with Bogner amp models.
mirrorprofiles.myshopify.com/products/rengob-2000-cabinet-ir-packPeavey JSX STL Amphub Emulation Demo / Mirror Profiles Tangy Orange Cabinet IRsEd S2024-02-27 | I just put these IR's on a very steep sale price - you can buy BOTH of the "TANGY" IR packs for just £10. Add both packs to your cart for the discount:
I don't own a JSX but its a great amp and not often modelled. I really dig this version.
High gain tones from STL Meridian XSR, clean's are Neural DSP Petrucci (flanger is also from that sim). Drums are Toontrack "Death" engineered by Mark Lewis.Softube Amp Sims are great..... if you do this.Ed S2024-02-18 | Thought I'd demonstrate this with Softube as 1Vp=0dBFS is quite a different calibration to what you might be used to from other brands.
If you use humbuckers, even if you record with a very hot signal, its still going to be too low for Softube. You will almost certainly have to boost the input by some amount.
If you record a hot signal with single coils, you may be OK. The best way is to work out what your input headroom is (in dBU). The add 0.79 to this value, and boost by your input level by that amount. Amp Room has a maximum of 12dB so you may have to boost with an external plugin.Marshall Valvestate 8200 Bi Chorus vs 8100Ed S2024-02-12 | Slightly different character to each amp, I think for this song I quite like the 8200. Tons of cool bands used these amps in the 90's for some iconic tones.
NAM pack coming soon featuring models made from an 8200, 8100 and 8080.
Dual Rectifier Red Channel, no boost. Amp loaded by a 2001 Traditional Mesa Cab but the IR is from my Cali 02 pack (BL 32 sm57).
mirrorprofiles.myshopify.com/products/cali-os-2002-cabinet-ir-packPark 1210 Rock Head Amplifier AIC #guitar #marshallamps #vintageampEd S2024-01-17 | ...Park Rock Head 1210 #guitar #marshallampsEd S2024-01-16 | when is a Marshall not a Marshall?Does recording guitar DIs hot give you better signal to noise?Ed S2024-01-10 | Had quite a few comments from people who are adamant you should record your guitar DI's close to clipping because otherwise the noise of your interface will contribute noise to your signal and spoil your DI tracks.
So here is a test - recording a DI at various input levels (ranging from a very dynamic 20dBu to a very hot and easily clip-able 8dBu).
Would you rather have an accurate gain response from your amp models, or would you prefer this improvement in noise?How to set the PERFECT input level for Neural DSP Plugins #guitar #recording #neuraldsp #pluginsEd S2024-01-02 | Check my other videos for more in depth demonstrations on setting levels for ALL amp sim pluginsSTL Tonality Josh Middleton vs Real Mesa Boogie Dual Rectifier Multi Watt vs Fractal Recto2Ed S2024-01-01 | IR's are mixed 70/30 in favour of the 57. 421 is position 66. Could probably have spent more time adjusting settings, much easier to do it with a plugin than with FM-3 where I have to reamp one track at a time each time I adjust something. IMO the STL plugin takes a little less work for me to match the amp, and it has all the settings/channels/modes of the amp, as well as a GUI. Both sound great.
0:00 - MW Red Modern 1:06 - FM3 Recto2 Red Modern 2:11 - Middleton Red Modern 3:15 - MW Orange Modern 4:22 - FM3 Recto2 Orange Modern 5:30 - Middleton Orange ModernMesa Boogie MW Recto Orange Modern vs FM-3 vs STL MiddletonEd S2023-12-31 | 0:00 - Real Amp 1:07 - Fractal FM-3 2:15 - STL Middleton
was comparing this amp to my Rev G, setting the orange presence to 0 gets fairly close to the orange modern channel and is quite a fun sound.
Thought I’d see how Fractal and STL Tonality Middleton fared against it and both did very well IMO. What do you think?The Ultimate Reactive Load Test 2023 - [Comparing to real 4x12 cabs with several amps]Ed S2023-11-22 | Update/spinoff to a previous video I've done.
For each setup, I am recording just the amp DI with each cab attached. I am then using an IR on the amp DI.
The following load boxes were used:
Driftwood Suhr React IR Fryette
I am using the exactly the same IR on the amp for each load. Same amp settings. With the Fryette I set it to 16 ohm when using 16 ohm cabs, and 8 ohm when using 8 ohm cabs. It changes the impedance curve a little.
I should also mention that the Fryette has various switches that can be combined to change the load, and further poweramp controls (when using it as an "attenuator") which would allow it to sound close to a lot of impedance curves. IMO there is a small trade off when using just the reactive load part on its own.
If you like what I do and want to support me, I make lR's, NAM/ToneX/Kemper profiles, Helix/Fractal presets etc. They are awesome (IMO) so go buy them here: mirrorprofiles.myshopify.com
0:00 - Dual Rectifier + Mesa OS Cab 1:08 - Dual Rectifier + Suhr RL 2:15 - Dual Rectifier + React IR 3:24 - Dual Rectifier + Driftwood 4:33 - Dual Rectifier + Fryette 5:41 - BE100 + EVH Cab 6:50 - BE100 + Suhr RL 7:57 - BE100 + React IR 9:06 - BE100 + Driftwood 10:15 - BE100 + Fryette 11:22 - Uberschall + Mesa Trad Cab 12:31 - Uberschall + Suhr RL 13:39 - Uberschall + React IR 14:47 - Uberschall + Driftwood 15:55 - Uberschall + Fryette 17:04 - 5150 + Marshall 1960TV 18:12 - 5150 + Suhr RL 19:20 - 5150 + React IR 20:29 - 5150 + Driftwood 21:38 - 5150 + FryetteModded Marshall Comparison - Friedman BE100 vs Peavey VTM120 vs Marshall DSL 100HEd S2023-11-07 | 3 different amps, all kind of doing their own variation of a high gain modded Marshall. Friedman is on HBE mode, VTM120 is on its highest gain settings, DSL is on OD1 Red. They all have their own quirks and features and I love all 3 amps equally.
[0:00] - Friedman BE 100 HBE [2:53] - Marshall DSL 100H [5:46] - Peavey VTM 120JCM800 Style Amps - JMP 2203 vs JMP 2204 vs JEL Modded Marshall vs Peavey VTM120Ed S2023-11-05 | Not trying to make them sound the same here, just kind of showing how they sound against each other. VTM is with all dipswitches down, JEL is in its lowest gain mode. All settings as shown in the photos, load used was a react IR. Might do a similar test with some cab loads soon.
IR used was from my CALI 1999 pack.
[0:00] - Riff 1 JMP 2203 [0:34] - Riff 1 JMP 2204 [1:07] - Riff 1 JEL [1:41] - Riff 1 VTM120 [2:15] - Riff 2 JMP 2203 [2:39] - Riff 2 JMP 2204 [3:03] - Riff 2 JEL [3:27] - Riff 2 VTM120 [3:51] - Riff 3 JMP 2203 [4:24] - Riff 3 JMP 2204 [4:56] - Riff 3 JEL [5:28] - Riff 3 VTM120 [6:00] - Riff 4 JMP 2203 [6:41] - Riff 4 JMP 2204 [7:21] - Riff 4 JEL [8:02] - Riff 4 VTM120 [8:42] - Riff 5 JMP 2203 [9:16] - Riff 5 JMP 2204 [9:51] - Riff 5 JEL [10:26] - Riff 5 VTM120 [11:00] - Riff 6 JMP 2203 [11:22] - Riff 6 JMP 2204 [11:44] - Riff 6 JEL [12:06] - Riff 6 VTM120 [12:28] - Riff 7 JMP 2203 [13:05] - Riff 7 JMP 2204 [13:42] - Riff 7 JEL [14:19] - Riff 7 VTM120Marshall VS8200 - The 8100 is not the ONLY Marshall Valvestate worth checking outEd S2023-10-29 | The 8100 is rightly lauded as a classic 90's high gain amp. The 8200 either gets overlooked, or lumped into the same 8100 discussion. While there are absolutely similarities with the control layout and design, the circuits are different (JFET vs MOSFET) and they sound quite different as a result.
If I had to describe them, I'd say the 8100 is more aggressive, tighter and brighter. The 8200 is warmer and thicker. I used a Maxon OD9 here just to give it an extra push forwards.
Meshuggah famously used the 8200's for a long time - they have a killer stereo chorus built in and take boosts wonderfully.
IR is from my Mesa 1999 cab pack, I'll probably do a Valvestate megapack and include the 8100, 8080 (same amp, but you know, tolerances) and 8200 all together.Marshall Valvestate 8100 vs Audiority Solidus VS8100Ed S2023-10-16 | I'll do a little 8100 vs 8200 demo soon, I think it'll be quite interesting. In the meantime, I thought I'd just do an updated video with Audiority's plugin as I was able to get it to sound much closer to the real amps. All it took was setting the input level higher, so it matches the internal levels it was modelled with. Audiority use 1Vp=0dBFS, so for most users you'll have to boost quite a lot at the input.
Its an excellent plugin that really gives you the experience of the real thing, it looks/feels/responds like the actual amp.ENGL E530 vs Plugin Comparison [Mercuriall // STL // Line 6 // Plugin Alliance]Ed S2023-10-14 | E530 was recorded through a Friedman BE100 Power amp.
Mercuriall and STL were made recorded through a NAM model of the BE100 poweramp chain.
With the Brainworx/PA Savage 120, its possible to bypass the built in poweramp, but it seemed to get closer using the included poweramp (even though it does sound different).
Could have included TSE and Amplitube, but they're both pretty old and I don't know their input calibrations.
IR is BL speaker from my CALI 2002 pack: mirrorprofiles.myshopify.com/products/cali-os-2002-cabinet-ir-packNeural DSP Mateus Asato vs Fractal vs Audio Assault - Bogner Shiva 20th Anniversary ComparisonEd S2023-10-06 | Didn't include Helix here because their model is based off an earlier Shiva that sounds much duller (and IMO not as good). Audio Assault has all the modes of the original amp, Neural has most (but no Boost button or depth). Fractal misses the tone switch and you have to approximate the boost.
Not my favourite real world amp, and not really an amp I'd use for this music, but I did anyway. Kind of liked Neural best, it had the most cut.
IR's from this pack: mirrorprofiles.myshopify.com/products/3vh-cabinet-ir-packMercuriall 6160 III Blue Channel vs Gojira Amp 2 (EVH 5150 Stealth vs EL34 100W emulations)Ed S2023-10-06 | This time comparing the blue channel. Bear in mind the Mercuriall plugin is an emulation of the EVH 5150 100S amplifier, Gojira is modelled from an EVH 5150III S 100W EL34 Head, so the circuits are slightly different.
The Mercuriall features 3 channels, and a switch for an "Ivory" mode on channel 3. Each has their own array of FX and pedals, Mercuriall is hosted within their Ampbox ecosystem along with emulations of Mesa Boogie's, Bogner, ENGL etc.
The master volume on the Mercuriall seems a lot more sensitive than I remember from the real amp, I prefer keeping it slightly lower for a more open "hifi" sound and a bit higher for more midrange and smoothness.
IR is from my CALI 2002 Pack: mirrorprofiles.myshopify.com/products/cali-os-2002-cabinet-ir-packMercuriall 6160III vs Neural DSP Gojira - EVH Stealth PluginsEd S2023-10-05 | Just a quick one here. They could definitely be dialled in to sound a bit closer but I think its demonstrable enough that they are capable of the same tones. Different prices, different pedals/fx, different IR's, Mercuriall has channel 1, the mode switch, the gain relationship between ch2 and 3 etc.
Will try and do another one soon comparing channel 2
FWIW Gojira is EVH 5150III EL34 and Mercuriall is 6L6, the circuits are slightly different between the 2 amps (besides just the valves).Bogner Uberschall Demo - (+NAM models)Ed S2023-10-01 | I used preset 6 "Presence 0" from this pack.
- Tone here is boosted with a Maxon OD9 throughout. For this piece of music it needed more gain than any of the amps can offer. Maybe Ill do another video with no boost but its quite common to do this.
- 2203 and 2204 circuits have different amounts of negative feedback. 2204 has less, and therefore sounds brighter. This is mostly why the 2203 has the presence higher
- Pot tolerances account for why I've set them all slightly different. I could probably match the tones even closer if I spent more time going back and forth on settings. Who really gives a shit when they're close enough?
- Vertical input 2204's and Horizontal Input 2204's both have the same amount of filter can caps, but the arrangement is slightly different. The later 2204's also use different spec power transformers which means the voltages in the preamp are higher.
- The 2203 is from 1977, the vertical 2204 is from 1979, the horizontal input 2204 is from 1989.(Lee Jackson designed) Crate Stealth 50Ed S2023-09-17 | Yes, its a Crate but designed by Lee Jackson so it makes it worth a look. Pretty cool "forgotten" amp, not that common here in the UK.
Tone stack is kind of interesting in how it behaves.ADA MP-1 - Heavy TonesEd S2023-09-16 | Big up @RDamps for letting me check out his rack gear.
80's rack classic here into a BE100 power amp. 1992 Mesa Cab IR.Hi Gain Amp Shootout [Bogner Uberschall vs Dual Rectifier vs 5150 vs Friedman BE100 vs JEL vs Krank]Ed S2023-09-07 | Which one(s) do you like?
Amp’s included here are
- Peavey 5150 Block Letter - Mesa Boogie Dual Rectifier Rev G - Friedman BE100 - Bogner Uberschall Rev Green - Modded Marshall 1987x - Krank Revolution Series 1Using NAM to capture pedals - which way is best?Ed S2023-09-05 | So here I'm comparing a boosted rectifier. We have:
Real pedal and amp Real pedal and NAM model NAM pedal and real amp NAM pedal and NAM amp NAM pedal and amp captured together
I think with pedal captures, if you reamp and capture at the same dBu level and don't normalise the captured wav file OR in the plugin, it retains the output level of the pedal very well. If you don't know the input and output level for the pedal, then I think its REALLY unlikely you'll land on realistic settings and in that instance I'd probably opt for using a real pedal, or a model that accurately handles both the gain of the pedal and the correct output to feed the amp.
Which sounds best to you? what method do you prefer?Real Bogner Uberschall vs Plugins [Line 6 Helix Ubersonic + STL Amphub Bogart]Ed S2023-08-29 | Here we have a real Bogner Uberschall Rev 2 (Green), STL Ampub "Bogart" and Line 6 Helix Ubersonic.
Which is which?
0:00 - [quickfire comparison] 0:19 - [example A] 0:39 - [example B] 0:58 - [example C]Bogner Uberschall Rev Green - First Tones!Ed S2023-08-27 | Apologies for reamping the DI's from the JEL video, I always go blank on what riffs to use so I just pulled those ones up.
I've made NAM models of the tones in this video, available here:
mirrorprofiles.myshopify.com/collections/cabinet-ir-packsNeural DSP IIC+ Bug?Ed S2023-08-04 | Is this typically how a IIC+ would behave at these settings? I'm assuming not, seems like a bug, or the amp was captured while having some technical issues.
Preset here:
dropbox.com/s/eaz67pjixof1ylv/Volume%20Swells.xml?dl=02023 Amp Profiling/Modelling Blind Test - Kemper vs NAM vs ToneX vs Fractal vs Softube vs NeuralEd S2023-08-03 | Its captain boring here again with another waste of everyone's time.
Made a Kemper profile to test out the new liquid profiling tech - the Kemper example here is just as things were captured, so not really taking advantage of the Liquid technology. I did have to lower the gain a little to match the real amp.
NAM was 400 epochs, 0.003 ESR. ToneX was default, I think this would have achieved a comparably low ESR, and advanced wouldn’t have had any benefit.
In this test there is (in no particular order):
- 1979 Marshall JMP2204 (EVH 412 cab load, but tapped with an Avalon U5 DI) - Kemper Profile of the above rig - ToneX capture of the above rig - NAM model of the above rig - Neural DSP Henson Amp 3 - Amplitube 5 - Softube Kerry King
Can you spot the real amp? can you identify the machine learned models? are algorithmic ones less realistic? any giveaway signs on each?
IR is from my CALI OS 1999 pack
*Line 6 Helix is disqualified because their 2204 doesn't have a bright cap. Sorry if I didn't include your favourite 2204/JCM800 model, some were just very different and wouldn't have made the test any more interesting.
0:00 -[Example A] 1:26 - [Example B] 2:52 - [Example C] 4:17 - [Example D] 5:43 - [Example E] 7:10 - [Example F] 8:36 - [Example G] 10:02 - [Example H]Custom JEL Modded MarshallEd S2023-07-25 | Bought this amp from @RDamps but we did a few tweaks to the circuit.
This amp started life as a 1987x, which was then converted to a stock 2204. Chris then did the JEL mods on switches, so you could add in any of the individual JEL mods to the stock circuit.
Because I'm well covered for stock Marshalls, I thought it better we hard wire the JEL mods in and use the switches for other mods. So "stock' its the JEL circuit (with massive thanks to @HeadfirstAmps for sharing all the details).
The extra switches are:
- Coupling cap between 0.022uF and 0.0022uF (one is fatter, one is tighter) - "Gain Boost" takes out an attenuation before the 2nd gain stage that gives more gain and thickness - 3 way bright cap (500pf, 270pF, none) - 3 way Jose Diode Clipping (Symettrical, Asymettrical and none) - Tone Shift (2 different Tone Stack capacitor values) - depth pot
and on the back there is a switch between standard 4 Ohm Negative Feedback, and No Negative Feedback.
Settings in the video/photos don’t really correspond to what you hear, I took some video clips after recording the riffs.
Single sm57 on a few different Mesa cabs, no other EQ. A hair of delay and reverb so its not pure mono.
Here, I have a DI recorded with 11.4dBu of headroom, which is actually clipping the converters a little (as in the peaks reach 0dBFS).
In the plugin, I am boosting the input a further 12.2dB. Until IK give any sort of information on what gives the most accurate response, this is a total guess, but it seems to work well for what you'd expect from these sort of Mark series settings.
If you haven't tried the IK Mark series stuff, they are well worth a go. and be sure to use the input slider to find the sweet spot, it really improves the feel and tapers of the controls.
Use discount code "YOUTUBE" for 33% off until 31/07/2023Amplitube 5 has some SERIOUS problems.... This is why it sounds bad.Ed S2023-07-20 | As a long suffering customer of IK products, Amplitube has always frustrated me because it gets so much right and then has a few small issues that become pretty massive.
Not all Amplitube models suffer from this issue, but the problem is you have to guess if any particular model suffers from this, and then have to guess how to correct it.
MANY of the amps in Amplitube require a massive input boost to have the correct gain structure. If you record with a hot DI signal (just clipping), you may still need to boost over 15dB to have the amp sounding correct. I'm almost certain no one on the planet is boosting Amplitube this much (at least consciously), and it means Amplitube has a reputation for being less accurate than it really is.
In this video I explore some input levels with demonstrations from other youtube videos showing the original gear. I am not imitating the tone - I am using their videos as a way of having a rough idea of how much gain to expect from each amp and channel. Tolerances would absolutely be a factor, but not to the extent that an amp is undergained by more than 15dB.
I hope this helps others get better tones from Amplitube (many amps come alive and sound excellent when you juice the input level). But even better would be for IK to acknowledge that this seriously affects how usable Amplitube is, and it absolutely needs correcting with any new developments. In its current state its a total mess.
Please share and lets get this fixed and improved so we all can benefit.
For your videos that helped me have a reference point for these gain levels.Mirror Profiles CALI OS 1992 (Mesa Boogie Oversized V30) Cabinet IR PackEd S2023-06-26 | An absolute gem of a Mesa Oversized cabinet - this one has original V30's dating to 1992, the first year Rectifier's were introduced to the world. The cab is interesting in that it has some cosmetic differences to all the later ones; velcro-removable grille, flat logo badge, smooth tolex, push in castors, jackplate with 3 sockets).
Sound wise, this is typical of the early 90's V30 tone, its brighter and more reminiscent of a Greenback's top end, with a full a deep low end that you'd expect from an oversized cabinet from Mesa.
IR's captured from Mesa's "Oversized" sized Slant cabinet. Mesa spec 8 Ω V30's from 1992. All 4 speakers captured from left to right. Mic's include USA made Shure Unidyne III sm57, Shure sm7b, Beyerdynamic m201, Beyerdynamic m160, Sennheiser MD421-U4.
Clean IR's and load compensated for React IR, Suhr and Fryette load boxes. Also includes MPT and natural phase IR's.
- 4 Speakers - 5 Microphones for each speaker. - Nearly 4000 individual IR's - Clean, and "Load Box Compensated" versions for all IR's - Microphones recorded with a 1073 mic preamp through mastering grade converters. - 48kHz 24 bit 500ms .wav
Should go without saying that the photos and video clips don't correspond to the exact audio you are hearing at each moment. Just a quick showcase of various mics on various speakers. LOTS of possibilities here.
0:00 - [sm57 + 421 blend] 0:48 - [m160] 1:36 - [m201]Mesa Boogie 2 Channel Dual Rectifier & OS 1992 Mic ComparisonEd S2023-06-25 | Shooting out various sm57's from my collection to pick the one I use to make an IR pack with. Which ones of these do you like the character of best?
0:00 - [Info] 0:04 - [sm57 B - Isolated Guitars] 0:51 - [sm57 Unidyne III - Isolated Guitars] 1:37 - [545 Unidyne III A - Isolated Guitars] 2:23 - [545 Unidyne III B - Isolated Guitars] 3:09 - [545 Unidyne III Red - Isolated Guitars] 3:56 - [sm57 B - Full Mix] 4:44 - [sm57 Unidyne III - Full Mix] 5:32 - [545 Unidyne III A - Full Mix] 6:20 - [545 Unidyne III B - Full Mix] 7:08 - [545 Unidyne III Red - Full Mix]
I decided to make a NAM model of the amp in this state (same boost/settings/cab load) and also IR's of each of these mic positions which you can buy here:
Amp settings are not from the corresponding model, NAM and IR settings are accurate :)Measure your Reamp dBu Level for NAM and ToneX!Ed S2023-05-16 | This is REALLY helpful information to include when you upload your amp models - everyone is using totally different gear to make models, and therefore achieving an accurate gain level depends on knowing this information (otherwise you have to guess what the correct input level is, and this can vary wildly).
Ideally you'll have your reamp chain and DI calibrated to the same dBu value, so that you have unity gain when making and using models (or just reamping generally). Please see my other videos for help on how to do set both the reamp box and DI to for fixed and consistent values.
This video just shows how to measure what your current reamp level is. Other people can use this information when using your profiles, and adjust the input level accordingly so their inout level matches yours. This is true for any guitar/bass/pedal etc, so its really handy and it gives you one less thing to worry about.
UPDATE: All-in-one spreadsheet here where you can set a D/A+reamp box to a specific dBu value, determine an unknown dBu level of a D/A+reamp box, and measure an unknown instrument input's maximum dBu level.:
Apologies for the boring nature of this video. Often the most boring subjects are the most overlooked, and its commonly things that can make a huge difference to how we use this gear.
This is a subject that isn't really discussed much, and getting accurate numbers from developers can be a challenge in itself.
Big love and respect to the companies who've responded to my approaches and been really helpful. Some companies don't want to offer any values (they just say dial it in to what sounds good to you), which isn't a position I agree with (I feel like its important for an emulation plugin to give an accurate response to using the real gear). I hope over time this information becomes more readily available and better understood, because developers and users all benefit.
Please understand - I am not saying this is the only way to use amp sims and any other way is wrong. I ABSOLUTELY believe in going with whatever sounds best, whether its accurate or not. But I also think that if you know what the correct level is (as in the level its designed to be used with) then you can always adjust for more or less level beyond there. If you are just guessing from the start, you could be using the models in a totally unrealistic range (kind of like stacking boost or attenuation pedals before the amp without knowing). This knowledge takes NOTHING away and only gives you more to work with for a better experience.
Hope everyone finds this helpful, and please leave any questions below.NAM vs TONEX vs KEMPEREd S2023-04-22 | I will note that ToneX seems to undergain things and requires manual adjustment to match the source, which definitely opens up room for error. The other profiling software seems to get a bit closer gain wise, Kemper I think requires a little bit of fine tuning (and definitely refining) to even get in the ballpark.