Renault Scenic windscreen wiper mechanism FEAnalysis 2015-10-14 | A quick look at the four bar link mechanism used on the Renault Scenic windscreen driver side wiper as an example of a mechanism analysis study.
ANSYS SMART crack growth simulation on a compact tension (CT) specimen FEAnalysis 2021-08-27 | We have used the ANSYS SMART crack growth simulation for fracture mechanics finite element analysis of a structural steel compact tension (CT) specimen. Experimental material characterisation for estimating the Paris Law crack growth parameters and FEA validation is supported by Advanced Materials Research Laboratory (AMRL) at the University of Strathclyde.
Cross Bore Fracture Mechanics Analysis Using ANSYS Workbench Mechanical 2020 R2 FEAnalysis 2020-12-14 | This is a quick overview of the SMART (Separating, Morphing, Adaptive and Remeshing Technology) tool in ANSYS Workbench Mechanical 2020 R2. A rectangular block with a cross bore is modelled and an arbitrarily shaped crack is inserted near the stress concentration. The internal pressure is ramped and the crack propagates as soon as the critical stress intensity factor K1c for the material is reached on the crack front. This is using a static analysis assumption and the results are arbitrary. Further advances of this type of analysis would include the fatigue option where the pressure is cycled and the fatigue life is calculated by the tool. Thanks for watch the @FEAnalysis channel and new videos will appear soon.This video does not have sound.
Limit Load Analysis of a Thick Cylindrical Pressure Vessel using ANSYS Workbench Mechanical FEAnalysis 2019-10-10 | Limit load finite element analysis of a thick cylindrical pressure vessel is demonstrated using the ANSYS Workbench Mechanical software. Elastic perfectly plastic material model is used. Loading and unloading load steps shown.
Linear Eigenvalue Buckling Analysis of a Slender Column Using ANSYS Workbench Mechanical FEAnalysis 2019-10-10 | Linear eigenvalue buckling analysis of a column is demonstrated using the ANSYS Workbench Mechanical finite element analysis software.
Transient dynamic finite element analysis of a plate using ANSYS Workbench Mechanical FEAnalysis 2019-10-03 | Transient dynamic finite element analysis of a plate using ANSYS Workbench Mechanical is demonstrated. Initially a modal analysis is done to estimate an integration time step for the first mode shape. Also a comparison is made with a static analysis of the plate.
Modal finite element analysis of a square plate using ANSYS Workbench Mechanical FEAnalysis 2019-10-03 | Modal finite element analysis of a steel, simply supported, 1m square plate with 6mm thickness is done using ANSYS Workbench Mechanical.
2D Steady State Thermal Analysis and Thermal Stress Analysis of a Thick Cylinder FEAnalysis 2019-09-27 | 2D Steady State Thermal Analysis and Thermal Stress Analysis of a Thick Cylinder using ANSYS Workbench Mechanical software demonstrated.
2D Transient Thermal Analysis of a Thick Cylinder FEAnalysis 2019-09-27 | 2D Transient Thermal Analysis of a Thick Cylinder is done using the ANSYS Workbench Mechanical software.
2D Steady State Thermal Analysis of a Long Thin Fin FEAnalysis 2019-09-27 | ANSYS Workbench Mechanical is used to simulate the steady state thermal analysis of a long thin fin in 2D.
3D Simply Supported Plate, Shell Type Finite Element Analysis using ANSYS Workbench Mechanical FEAnalysis 2019-09-19 | 3D Simply Supported Plate, Shell Type Finite Element Analysis using ANSYS Workbench Mechanical
3D Cylindrical Thick Pressure Vessel Finite Element Analysis with ANSYS Workbench Mechanical FEAnalysis 2019-09-19 | 3D Cylindrical Thick Pressure Vessel Finite Element Analysis with ANSYS Workbench Mechanical
2D Thick Cylindrical Pressure Vessel Finite Element Analysis with ANSYS Mechanical APDL FEAnalysis 2019-09-19 | 2D Thick Cylindrical Pressure Vessel Finite Element Analysis with ANSYS Mechanical APDL.
2D Cylindrical Thick Pressure Vessel Finite Element Analysis with ANSYS Workbench Mechanical FEAnalysis 2019-09-19 | 2D Cylindrical Thick Pressure Vessel Finite Element Analysis with ANSYS Workbench Mechanical.
3d beam example finite element analysis with ANSYS Mechanical APDL and BEAM188 element type FEAnalysis 2019-09-16 | This is a video demonstration of a 3d beam example finite element analysis with ANSYS Mechanical APDL and BEAM188 element type.
2D Truss Example FEA using ANSYS Mechanical APDL FEAnalysis 2019-09-16 | This video demonstrates a 2D truss example problem finite element analysis using the ANSYS Mechanical APDL software and the LINK180 element type. Interactive direct generation of a model with nodes and elements is shown and step by step instructions are given.
Nonlinear Finite Element Analysis of a Pressure Vessel using ANSYS Mechanical APDL FEAnalysis 2018-03-22 | Nonlinear finite element analysis of a thick walled cylindrical pressure vessel is demonstrated using the ANSYS Mechanical APDL software.
Modal Analysis of a Square Plate using Creo Simulate FEAnalysis 2018-03-20 | Modal analysis of a square steel plate is demonstrated using Creo Simulate. Natural frequencies and mode shapes are shown as well as the affect of adding a point mass on the structure.
Nonlinear Buckling Analysis of a Slender Column using ANSYS Workbench Mechanical FEAnalysis 2018-03-14 | Nonlinear buckling analysis of a slender column is performed using the ANSYS Workbench Mechanical finite element analysis software.
Nonlinear Buckling Analysis of a Slender Column using ANSYS Mechanical APDL FEAnalysis 2018-03-14 | Nonlinear buckling analysis of a slender column is performed using ANSYS Mechanical APDL and the BEAM188 finite element.
Linear Eigenvalue Buckling Analysis of a Slender Column Using Creo Simulate FEAnalysis 2018-03-11 | Linear eigenvalue buckling analysis of a column is demonstrated using Creo Simulate finite element software.
Linear Buckling Analysis of a Slender Column using ANSYS Mechanical APDL FEAnalysis 2018-03-11 | Eigenvalue Linear Buckling Analysis of a Slender Column is performed using the ANSYS Mechanical APDL finite element analysis software.
Pressure Vessel Design Optimisation using Shell Idealisation and Creo Simulate FEAnalysis 2018-03-04 | Pressure Vessel Design Optimisation using Creo Simulate 3D Shell Idealisation Finite Element Analysis. The optimisation of the pressure vessel mass by varying the vessel wall thickness is investigated. A design stress is specified as a design constraint.
Pressure Vessel Design Optimisation using Creo Simulate 2D Axisymmetric FEA FEAnalysis 2018-03-04 | Pressure Vessel Design Optimisation Analysis using Creo Simulate Finite Element Analysis. The optimisation of the pressure vessel mass by varying the vessel wall thickness is investigated. A design stress is specified as a design constraint.
Pressure Vessel Design Sensitivity Analysis FEAnalysis 2018-02-26 | Pressure Vessel Design Sensitivity Analysis using Creo Simulate Finite Element Analysis. The sensitivity of the stresses on the pressure vessel to the vessel wall thickness is investigated.
Cantilevered I Beam Finite Element Analysis with Shell Element Idealisation FEAnalysis 2018-02-04 | Cantilevered I Beam Finite Element Analysis with Shell Element Idealisation using Creo Simulate
Cantilevered I Beam Finite Element Analysis with Beam Element Idealisation FEAnalysis 2018-02-04 | Cantilevered I Beam Finite Element Analysis with Beam Element Idealisation using Creo Simulate
Thick Cylindrical Pressure Vessel Axisymmetric Finite Element Analysis FEAnalysis 2018-01-29 | Thick Cylindrical Pressure Vessel Axisymmetric Finite Element Analysis using Creo Simulate
Thick Cylindrical Pressure Vessel 2D Plane Strain Finite Element Analysis FEAnalysis 2018-01-21 | This video demonstrates the 2D plane strain finite element analysis of a thick cylindrical pressure vessel using Creo Simulate.
3D Rectangular Beam FEA with Creo Simulate FEAnalysis 2018-01-19 | Simple 3D FEA model of a rectangular cross section beam loaded in bending and looking at the displacements, stresses, effect of stress concentrations and mesh refinement.
Creo Simulate Plane Stress FEA for Stress Concentration on a Plate with a Hole FEAnalysis 2017-12-30 | This video tutorial demonstrates a Creo Simulate Plane Stress Finite Element Analysis for the evaluation of the Stress Concentration on a Plate with a Hole.References:fracturemechanics.org:http://www.fracturemechanics.org/hole.html ESDU 09014:esdu.com/cgi-bin/ps.pl?sess=unlicensed_1171231100001khc&t=doc&p=esdu_09014aT. Comlekci et.al., "Elastic stress concentration at radial crossholes in pressurized thick cylinders," The Journal of Strain Analysis for Engineering Design, Vol 42, Issue 6, 2007:http://journals.sagepub.com/doi/abs/10.1243/03093247JSA251
Creo Plane Stress Analysis of a Plate with a Hole FEAnalysis 2017-12-29 | This video tutorial creates a Creo plane stress analysis model for a simple benchmark probem of a plate with a hole in order to investigate a stress concentration problem.
Linguine (spaghetti) bridge activity FEAnalysis 2017-10-15 | A STEM (science, technology, engineering and mathematics) activity for pupils interested in engineering: design, build and test a linguine (spaghetti) bridge that can carry the maximum weight! For mechanical, aircraft & civil engineering programmes.
Creo Simulate design optimization study of a rectangular beam FEAnalysis 2015-10-15 | This tutorial demonstrates a Creo Simulate finite element analysis for design optimization of a simple rectangular beam. Surface and volume regions are used to define boundary condition or element exclusion regions.
Creo Simulate design sensitivity study for rectangular beam FEAnalysis 2015-10-14 | This is a Creo Simulate finite element design sensitivity study for a simple rectangular beam. The beam depth is varied and its effect on the maximum Von Mises stress on the model is analysed.
Creo Mechanism Analysis : Ball Projectile FEAnalysis 2015-10-07 | Creo Mechanism Analysis of a Ball Projectile is a demonstration tutorial for the 2nd Year Mechanical Engineering Students.Dr Tugrul Comlekci
Spherical Pressure Vessel with a Cylindrical Nozzle FEA - Part 3 Shell Analysis FEAnalysis 2015-01-05 | A spherical pressure vessel with a cylindrical nozzle is analysed using the finite element method. Part 1 demonstrated 2D Axisymmetric Analysis and Part 2 demonstrated 3D solid modelling using ANSYS Workbench DesignModeler and Mechanical. In this Part 3, shell type modelling is demonstrated with the middle surface tool to create a surface model.
Spherical Pressure Vessel with a Cylindrical Nozzle FEA - Part 2 3D Solid Model Analysis FEAnalysis 2015-01-02 | A spherical pressure vessel with a cylindrical nozzle is analysed using the finite element method. Part 2 demonstrates 3D solid model analysis using ANSYS Workbench DesignModeler and Mechanical and compares the results with the Part 1 which was a 2D axisymmetric FEA model. Part 3 will be a shell type model which will be compared with the Parts 1 & 2.
Spherical Pressure Vessel with a Cylindrical Nozzle FEA - Part 1 2D Axisymmetric Analysis FEAnalysis 2014-12-31 | A spherical pressure vessel with a cylindrical nozzle is analysed using the finite element method. Part 1 demonstrates 2D Axisymmetric Analysis using ANSYS Workbench DesignModeler and Mechanical. Part 2 will be 2D solid modelling and Part 3 will be a shell type modelling.
Stiffened Plate Static Structural Finite Element Analysis FEAnalysis 2014-12-29 | A simply supported rectangular plate with stiffeners is analysed using the finite element method. Shell type analysis is used and a shared topology between the plate and the stiffeners is achieved with ANSYS Workbench DesignModeler and Mechanical.
Solid I-Beam Static Structural Finite Element Analysis FEAnalysis 2014-12-28 | Finite element analysis demonstration of a simple 3D I beam model using ANSYS Workbench 15.
Thick Cylinder Pressure Vessel Static Structural Finite Element Analysis FEAnalysis 2014-12-25 | Finite element analysis demonstration of a simple quarter symmetric two dimensional thick cylinder pressure vessel using ANSYS Workbench 15.
