Today we're going to show you how to build an earthbag wall step-by-step. The main thing is to use good technique so that the wall is strong, level, plumb, and square. If you just pile the bags at random, it won't be nearly as strong as what we're going to show you today. One of the main things we're trying to show here is good building technique so that the wall is very strong. You can think of this like large bricks that overlap each other, that overlap at the corners. If built correctly, this is extremely strong and can withstand an earthquake or hurricane. If built correctly, it can be very strong like the roundhouse we're building now. by Owen Geiger
Today we're going to show you how to build an earthbag wall step-by-step. The main thing is to use good technique so that the wall is strong, level, plumb, and square. If you just pile the bags at random, it won't be nearly as strong as what we're going to show you today. One of the main things we're trying to show here is good building technique so that the wall is very strong. You can think of this like large bricks that overlap each other, that overlap at the corners. If built correctly, this is extremely strong and can withstand an earthquake or hurricane. If built correctly, it can be very strong like the roundhouse we're building now. by Owen Geiger
This video is about hairline cracks in plaster. The crack here is about 1/32" -- a very small crack. It does not affect the structure. It's not from settling, nothing like this. There's nothing wrong with the structure, it's just a very small hairline crack in the plaster. What happened is the plasterer's would quit at the end of the day and they would stop here, in the same place every day. So this is a reminder to stop in different places so these cracks don't develop. This is easy to fix if you wanted to put a little caulk or spackling in here and then you could repaint. That would keep any water from getting into the wall. But it's no big concern really, because we have wide roof overhangs and so we just left the crack here. But it looks a little bit bad so maybe we ought to patch it.Passive Cooling Strategiesnaturalhouses2012-04-09 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Today I want to talk about passive cooling strategies for keeping your home cool in hot climates. This is a very hot climate and yet our earthbag roundhouse is about 15 degrees Fahrenheit cooler inside than out. So 15 degrees Fahrenheit, 8 degrees Celsius temperature difference with no mechanical cooling systems. No air conditioners, no fans, no anything. It's just passive strategies, natural strategies for keeping the home cool without the use of machinery or electricity. So we'll discuss about 11 different strategies that you can use. They're all very low cost and simple. The first one is the color of your wall -- your exterior wall. You want the walls to have a light color so they reflect the sunlight. One of the most important things is to have wide roof overhangs. This is about 4 feet, a little over one meter. So the sun almost never hits the wall. Because they're high mass walls, if the sun hit the walls frequently, that mass would heat up and eventually that heat would transfer inside. So we keep the sun off the walls as much as possible. Another important strategy is windows. We have casement windows that swing open and catch the prevailing breezes. So the breezes come from this way and these are like a scoop -- a wind scoop -- to pull the wind into the roundhouse. We also have windows on all sides of the house so the breeze is always blowing through. If you look up above the window, we have screened openings above the windows that keep insects out, but let hot air escape this way. And I don't know if you can see it, you might want to come closer. Above the bond beam is a gap of a few inches. In between the rafters there's a gap where hot air can escape. So the hot air is rising and it goes out the top. Also we use thatch roofing and some air passes through the thatch. We also have one of these screened openings above the door as a transom. Let's go inside and I'll show you the earth coupled floor. This is our earth coupled floor right here. What that means is the floor -- the high mass floor -- in this case concrete, but it could be tamped earth, stone, CEBs, brick, recycled brick, whatever. The floor is in direct contact with the earth underneath with a moisture barrier to prevent wicking of moisture. So the floor is absorbing the coolness of the earth. It's very cool, surprisingly cool even in this hot climate where you can start sweating in just a few minutes. So this is surprisingly cool. We also have earthen plaster on the inside. All that mass and this mass partition wall all absorb the coolness of the earth -- the coolness coming up from the earth. And the breezes help all the hot air escape. So the temperature inside stays the same night and day. You don't need an air conditioner or even a fan. It's surprisingly comfortable in here. Some other strategies, you want to look up and see the high ceiling. So there's plenty of space for hot air to rise and escape. There you can see the gap above the bond beam to improve ventilation. The last strategy I'm going to talk about is vegetation -- using plants to keep the building cool. Here we've used a mango tree on the hot southwest side of the house. That's the hottest direction. We have different plants here. So the sun, as you can see, almost never hits the house directiy. And also we have a very large tree above here that protects and shades the house through most of the day. Again, these are all simple, low cost strategies that anyone can do. Very low cost, very simple. You can save a lot of money on energy bills and also help the environment.Cordwood Construction on Gravel Bag Foundationnaturalhouses2012-04-09 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
There are a lot of little details you can search on the Internet. This is just a basic introductory video to show you the cordwood/earthbag concept. What I like to do is have the mortar recessed slightly. It looks a little better if the wood is protruding slightly. You smooth this out. The mix is very similar -- it's basically cob. You could also call it earthen mortar. Here is my general impression of cordwood construction. It's extremely beautiful. It's very practical in certain areas where you have an abundant wood supply. But it's very labor intensive. Earthbag is several times faster. So it's very slow. What I would recommend for most people is maybe just use it around a doorway, an entryway, because it's very beautiful. Maybe around your fireplace, something like this, because it's very beautiful. You can search the Internet and see some really beautiful examples of cordwood construction.Earthbag and Straw Bale House Plans by Owen Geigernaturalhouses2012-01-31 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.comStraw Bale Sheltersnaturalhouses2012-01-17 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.comBasic Earthbag Building: A Step-by-Step Guide New DVD video by Owen Geigenaturalhouses2011-12-25 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
The video is only available through Amazon.com at this time.
Compressed earth blocks or CEBs are available in dozens of shapes. This block is a half block and it's designed to work with regular CEBs to reduce cutting. CEBs also come in curved shapes like this to make planters, decorative columns and cisterns. This is a special design for decorative columns. And here's a sample brochure of the different styles.Earth Block Testingnaturalhouses2011-05-14 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Today we're testing the various earth blocks and earthbags that we've made over the last 2-3 months. We're going to weigh each sample, do a visual inspection -- for example, we'll test the hardness and look at it carefully. Also we're going to do a shear test. You see over here we have two blocks set 10" apart, and I'll stand on top of the block or on top of the bag. Also, I'm going to cut the bags open and then cut the samples in half so we can inspect the inside. We'll post the results on our Earthbag Building Blog. [Note: there's also a 4' drop test at the end, where samples are dropped on one corner.] I have to preface this by saying this is not a careful, scientific experiment. It started out as a fun thing to try. It was haphazardly done. Many of the samples were moved before they had dried. Many were left out in the rain. Two samples were totally destroyed -- the ones with the (rice hull) ash. So it's unfortunate, but this was never intended to be a careful experiment. So the test results are going to be questionable at best. But still, I think we can ... I think it's a worthwhile experiment and we can learn a little bit, so we'll see how it goes.
[They sound very solid.] This bag I had high hopes for, but it was not made very carefully. You can see the cracks that developed because the bag was not contained (constrained). It was tamped and kept expanding without anything restraining it, and it formed cracks. This was a bag with road base and extra clay. So this is unfortunate because I had high hopes for this. Obviously if you have big cracks it's not going to pass the shear test, I don't think. This one is the clay and rice hulls. You can hear it has a dull sound. It has good insulation. Again, it has some bad cracks. If we did this again, next time I would constrain the ends so they can't expand and cause these cracks. In an earthbag wall the bags are butted against each other, where these samples were not. So this was a valuable lesson learned.
[Shear test.] This is good news. The road base with extra clay is very strong even with those big cracks in it. This is surprising. Even the clay and rice hulls are holding my weight. This one is not nearly as strong. You can see the corner broke away as I picked it up, but still it has pretty good shear value. This is good news because the clay and rice hull block is passing the shear test. This is one of my favorite samples. It has a real good look and feel (it's lighter weight and has insulation). This is the vetiver clay with rice hulls. It's one of the best blocks. It passed the shear test. This is the adobe block. It's passed the shear test even though there were some cracks formed in it when I was making it.
[Drop test.] Note: the first three samples pass the drop test. The earthbag made with clay and extra vetiver did not pass the test. Both halves split apart, probably because there wasn't enough clay to hold them together.
[Cutting the bags open to inspect the core.] This is the bag with road base and extra clay. It looks almost like concrete even though the ends were not constrained. It's a very solid mix. It looks very good. This looks better than what we were using (entirely road base). The extra clay seems to make it stronger. [Note: extra clay soil was added, not clay.] This is the clay with extra rice hulls. This is good insulation, but yet it has a good solid feel to it. [Note: this turns out to be the strongest sample in this test.] This sample has clay and rice hulls, and you can see it's still solid. So it has some insulation and still looks good. This one here has more rice hulls.
[Drop test continued with earthbag samples.] Very good! No damage at all. It feels like a rock. [This is the earthbag with clay and some rice hulls that appears to be the strongest sample in this test.] No damage. This crack was there when it was made. No damage to this one either. Whoa! This was the road base with extra clay. It just busted apart. This is the road base with extra clay [second sample to confirm results]. Obviously it's crumbly.$300 Earthbag Housenaturalhouses2011-05-13 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.comMaking Compressed Earth Blocksnaturalhouses2011-04-28 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
This is the clay soil they start out with. You can see it has lots of clumps. These are the hammermills that pulverize the soil. You can see the soil in the background. It's a fine powder. That way it mixes well with the cement. Shovel the soil into the top and then it shoots out the powder in the front there into that pile. This is a mortar mixer. They take the pulverized soil and mix it with cement seven to one (7:1) -- seven parts pulverized soil to one part cement. Mix it with water and then dump it into this mixing trough here. This is the CEB press that compresses the soil into earth blocks. You raise the arm, pull the arm down to compress the earth, raise it back up to the other side to release it, take the blocks out. These are the finished earthen blocks.Wood, Bamboo and Thatch Roofsnaturalhouses2011-04-28 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Here are two examples of traditional wood, bamboo and thatch roofs. The second one has layers of plastic under the thatch to extend its life.Adjusting the Moisture Contentnaturalhouses2011-04-23 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
You can adjust the moisture in your soil mix. In this case we're using road base. You can see that this is too wet. If it looks glistening with water then it's obviously too wet. If you squeeze it and see water coming out like this then it's too wet. So you can take your digging tool -- this is a grub hoe -- you can mix drier soil with it until you get the right mixture. This is perfect right here. Let's zoom in and take a good look at this. It has just enough moisture that when it's tamped together it will turn into a hard block -- a hard building block -- and water won't squish out of the bags.Clay/Aggregate Ratio of Soilnaturalhouses2011-04-23 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Today I'm demonstrating how you can adjust the clay/aggregate ratio of your soil that goes in the earthbags. This mixture of road base is very good, but maybe it can be improved by a small percentage of additional clay. So I'm going to add 5% extra clay and make a test earthbag, and then we'll check the results later after it dries.
Make sure to mix it thoroughly. Here's what we have so far. I mixed a little bit of clay with one bucket of road base and it's looking better. The point of this is to make sure you have enough clay to 'glue' the sand and gravel together and make it nice and strong. We're tamping the contents after we add each bucket of soil to make sure it's well compacted. Add the same amount of clay to each bucketful. I can see a visible improvement, there's a pretty good difference in the amount of clay. I think this will be stronger. Looking in the bag, it looks like a more solid mix, so I think this test will prove successful. I'm going to put the earthbag against the wall before I tamp it to simulate an earthbag in the wall -- see? That way it won't expand too much. You can see a little clay coming through the bag. There's just a little bit too much water, but it looks good so far. We're going to dry it about two weeks and then remove the bag.Low Fired Bricknaturalhouses2011-04-20 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
These low fired bricks are extremely practical, low cost and a great way to build with. Millions of houses all over the world are built with these low fired bricks. It's [made with] clay, just like a clay flowerpot -- terra cotta -- fired at low temperature so it doesn't take a lot of energy. In fact, around here they make these by burning rice hulls. They take waste rice hulls, fire the kiln with rice hulls and after two days or so the bricks are finished. They're rot proof, fireproof, very easy to work with. They take an old engine from a truck, hook it up to a pugmill. You can see how the clay has been extruded. They cut it off to length and let them dry in the sun and then fire them. You can get the details on the Mother Earth News Blog and our websites. Google "low fired brick" and my name and you'll find articles on this and just every topic you see on [my YouTube site].Earthbag Benchesnaturalhouses2011-04-20 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
I'm going to take you on a little tour of three of our earthbag benches we've built for various projects. This first one is probably the best. It was built for Mother Earth News magazine. It has a wood arbor of durable hardwood and the earthbag bench with a stone foundation and stone in front. The plants have grown up quite a bit since we built it. We've trained them over the top, and they have these wonderful flowers that smell like bananas. This second bench is used next to the doorway of our roundhouse. It serves as a buttress to reinforce the doorway. I call these the perfect starter project, because in just a few hours or easily one day you can make these benches. It's just bags of sand and gravel -- or even just gravel if you don't have sand -- stacked up and plastered. Very, very simple. This is our third and simplest earthbag bench. It's made almost entirely with leftover materials from the roundhouse. We had gravel, extra bags, and we had some tile left over from our bathroom and countertop. We just pieced it together, it seemed in almost no time, maybe an hour and it was almost all built. And then when the roundhouse was plastered this bench was plastered at the same time, again with just leftover cement. So it's virtually free. It has a nice curve to it. It has a good location next to this tree. Search our Earthbag Building Blog and you can find all the details on these earthbag benches.Soundproof Wattle and Daubnaturalhouses2011-04-20 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
I'm using this wattle and daub sample to demonstrate how you can build soundproof interior walls. Just add some straw. Slide it down between the slats. Work your way down. This can be plastered. And with just a little extra effort you can have some soundproofing in your walls.Adobenaturalhouses2011-04-20 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
This test block was made using traditional adobe methods. Adobe soil, sand and straw are mixed and placed in a wood form, and the block is dried in the sun. We made this block primarily for comparison purposes with our other earthen blocks.Building Supply Centers of the Futurenaturalhouses2011-04-18 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
The cost of energy keeps going up every year. This means the cost of producing and transporting goods keeps increasing. At some point there's going to be a tipping point where modern building materials are not affordable. I don't know when this will happen, but it could happen at any time since fossil fuels are rapidly being depleted. Building supply centers of the future could look like this, selling minimally processed natural building materials such as wood poles, bamboo, woven bamboo mat, low fired brick, thatch panels and other similar materials.First Coat Earthen Plaster on Earthbagsnaturalhouses2011-04-18 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
This is the process we use on the first coat of earthen plaster on earthbags. Prepare your materials, including clay soil, straw or vetiver, and sand, and just enough water to make a thick mix. Add it in layers and mix together. Add the straw or fiber at the end. This is what you want: a thick mix with just enough water to hold it together. Push it against the wall and fill the recesses between the bags. (Note: I was a little messy here. You don't want to cover the bags on the first coat, only fill the recesses.)Vetiver and Rice Hull/Claynaturalhouses2011-04-18 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
If you've been watching our videos, you've seen us making various earthen blocks. This one here is the best one so far. It has clay and rice hulls. Another very good block was the clay with vetiver grass. So I had the idea to combine the best -- the rice hulls and the vetiver. That's what we're testing today. This block back here is adobe, just the traditional adobe mix. We're using this wood form that's 10"x14"x6" high. That's a typical size earthen block. You could put these same materials in earthbags, but it's a lot of extra work. It would only be worthwhile probably if you wanted something special like a lightweight insulated earthbag.
We're using the same basic ingredients -- rice hulls, chopped vetiver for fiber to hold the block together, sifted sand and clay soil. This is not pure clay, this is clay soil. You have to experiment with your own soil and ingredients to get the right mix, but this is what we've been using approximately 2:1 -- two parts clay soil to one part sand, one part rice hulls, one part vetiver, and enough water to make a stiff mix, but no extra water. Add the clay first -- the clay soil actually -- with a little bit of water and let it soak. This saves a lot of mixing. Add a little at a time. And again, it would be easier to make this in large quantities in a pit or on a large tarp. We're just making one small sample here. Add the ingredients in layers to reduce mixing. Add the fiber at the end to make mixing easier.
I like the vetiver grass, because it adds termite resistance and tensile strength. We made a second small batch in order to fill this mold. I think this is going to be our best block so far. We're combining everything we've learned to make a block that's stronger, lighter, insulating and insect resistant. Another thing we're doing this time is we're pouring it in the mold in place. This adobe block we made elsewhere and it cracked as I was carrying it over here to dry. This time we'll make it right here and we won't move it around. We should have a stronger block. In about two weeks or so we're going to test all these blocks that we've made and see which ones are the strongest and the best. So stay tuned for our next video.Second Coat Earthen Plasternaturalhouses2011-04-14 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
So here's our example of finish plastering using earthen plaster on this wattle and daub sample. Several people did this. You just use the edge of your hand right here. Just put on a thin layer. So the edge of your hand becomes like a trowel. You could do this with a trowel, but we're using our hands to show the simplest way. Same basic mixture (as first coat) except the straw is chopped into smaller pieces. Be careful not to use too much moisture or it will crack. Use fairly thin layers on the finish coats. You could put one or two more on top of this. You can also take a yogurt lid or piece of plastic and you can go around and make it smoother and smoother. That's it, very simple. You don't need to use a trowel, but this is a good shape to have (curved trowel). And a pointed trowel like this is good for along edges and in corners. I'm demonstrating this to show how you can flatten it -- get it flatter and better with a trowel. You're basically just cutting away -- see -- you cut away from the high places as you're troweling and you can put that into a low spot. Like here's a low spot. So you can work it. Get your trowel wet and you can continue to smooth it as much as you want. It could be as smooth as glass. And this is only the second coat. You can keep doing this over and over until it's polished. (Or use a less than perfect finish.)
So we're just playing around here just a little bit to demonstrate the possibilities. But you can see it's getting harder and flatter, smoother and what's happening is you're removing material from the high places, depositing it in the low areas, so you're flattening it a little at a time. The clay platelets (particles) are realigning. You're compressing the clay platelets and creating a harder, stronger surface. Of course a professional would do this same thing but much faster, but this is the basic process that they're using.Pinning Corners of Bags With One Stitchnaturalhouses2011-04-11 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
I'm demonstrating the fastest way I know of to pin the ends (corners) of the bags so they don't stick out in the plaster. I measure about 3" of galvanized wire. Chop it with a metal chisel. It gets to a very sharp point. Basically you're just going to pull the bag over a little bit -- about this much—it looks like about 1-1/2". Poke the wire through. It goes through just like a needle, it's so sharp. And then bend the end over like this. I think you could do this in about two seconds, and you only use about 3" of wire. Okay, let's try it again. Here's a piece already started. Bend it over, poke it through, bend the ends towards each other. Just like that. Finished. The same thing works just as well with these mesh bags. Pin it just a little bit -- about 1-1/2" so you don't end up with a big recess that you have to fill with plaster.Mesh Bag Detailsnaturalhouses2011-04-11 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
I want to talk a little bit more about these mesh bags that are used in the hyperadobe system. It's the hot new development. Let's take a close look. The open weave allows the soil to dry much faster. They're lower cost. They're almost as strong (as poly bags). They're less expensive. You don't necessarily need barbed wire between courses, because the soil will go through the mesh and one layer will bond to another. So you can save a lot of time and money on the barbed wire. You pin the corners in the same way with a small stitch. You don't want a large stitch or you'll have a recess that you have to fill with plaster. Also, I wanted to talk about the bucket chute we're using. This is a 3-gallon size. It's smaller than the other size we're using (for poly bags). We took a stainless steel bucket, cut the bottom off and filed it to get rid of the sharp edges. Also, we cut the handle off -- the attachments for the handle.
Almost everything about these mesh bags is more positive than the white poly sand bags most people use. The mesh is stretchier, so it's a bit more effort to get it on (the bucket chute), but not much harder. After it is filled and stretches, it's the exact same size as our other bags (which are standard 18"x30" measured when empty). So you can use them together like we're doing on our cool pantry. [Example: gravel filled poly bags on lower courses, mesh bags with soil above.] They're very strong. We tamped this last course very, very hard and there were no tears. So again, we think this is the future of earthbag building possibly, one aspect of it anyway. These are bags that would have been thrown away. We bought them inexpensively -- about 6 cents. There are very few alternative uses for these. We bought them at the farmer's market. So this is about ¼ the cost of white poly bags (polypropylene bags). And they're just as good if not better. You can also buy this material in a roll and lay down tubes, which is the fastest way. But the bags are good because it's a recycled product that's less expensive. So we're very happy with this. We just did one course on the cool pantry, we'll show you here, and it's incredibly strong, very good system. We're very happy with it. Come to our Earthbag Building Blog and you can read all the details. We're reporting on this development in a lot of detail, because it's such a great idea.Bamboo Wattle and Daubnaturalhouses2011-04-08 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
This is a demonstration of wattle and daub made with bamboo. Wattle and daub is the world's oldest known building method used all over the world many thousands of years. Here we're using bamboo. You could use small saplings and branches woven together in the same way. We peeled the bamboo on the surface -- the green surface. It would be good to treat the bamboo. There are different ways of doing that. You could see on the Internet. We nailed them together with small nails about 5/8" long. Tack them together. It's fairly quick and easy. This bamboo has been split with a machete. This sample is about 22" x 36". You can see how it's woven. This one goes above, this one goes below. And actually, these should alternate above and below, but because it's a small sample we just nailed them on top for speed and convenience. We're using vetiver grass for fiber to help hold the plaster together and reduce cracking. We're chopping it up into small pieces. If you're doing a large quantity of this, work on top of a tarp so you capture all the pieces that you're chopping. Here, I'm chopping directly into the bucket for speed. We're just making a small sample.
First I showed you the frame -- the bamboo frame -- that's the wattle. This is the plaster or daub. We're demonstrating how to make our plaster. We're using clay soil. You could also use clay. Dry clay will mix more easily. We're using some rice hulls to add some fiber and insulation. We're using the chopped vetiver grass for fiber. We've screened out our sand to get rid of these larger pieces. We don't want those in the plaster. You don't have to screen the clay or clay soil. We did it so it would mix easier. Add a little water in the mixing container and then keep a bucket of water handy. We don't want too much water. We want a stiff mix that's not too wet. To find the best recipe or ratio of ingredients you have to experiment with your soil. What we're using is roughly a two to one of clay soil to sand. So two clay soil to one sand, and then we'll add some fiber until it looks good, and just enough water to get the right consistency. We're going to add the soil a little at a time to let it dissolve in the water. This will save labor mixing. We put it in in layers. That also saves mixing. We're just making a small sample. If you're building a house, you'd want to make this in large quantities in a pit or on a tarp. We'll add the fiber at the end. This looks like a pretty good mix here. Let's try it out. Take the plaster mix by the handful and work it into the frame (the wattle). You could have another person on the other side doing the same thing, pressing from the other side. You don't want it too thick. Otherwise it will crack. It looks like a good mix. Now you can smooth it out. Looking good.
This is what it looks like on the back side. If you smooth this out and add some more plaster, it will help it bond to the wattle, make it much stronger. Here's how we screen the sand using fishing net. This gets rid of the rocks. This is especially important on the finish coat.
This ratio of ingredients worked perfectly and so we're going to do the same recipe for the next batch and add it to the back. That will help it bond together. The only way to know your (best) recipe is to test it out. The only way to know for sure is to test out your local materials, because soil will vary from location to location. You can pre-soak the clay. That will save some mixing. Add a little water at a time so you don't add too much. If your sand is wet, then you have to add less water. Of course, you could mechanize the mixing process with a mortar mixer. We're always trying to demonstrate low cost, low tech methods. A lot of people mix the earthen plaster with their feet.
Now we're doing the back side. By putting it on both sides it will lock together. This wattle acts as your frame and creates a mechanical bond. So these long fibers are basically wrapping around the wattle to lock everything together. We're supporting the back side so the first coat doesn't fall off. And, of course, if you're actually doing this, this would be a whole wall that's built solidly. This is just a small sample. This is ideal for interior walls that are thin and don't take up much space. And, of course, it's very low cost -- virtually free. I've been a builder all my life. I have to say this is one of the best, one of the most amazing experiences right here. There's something very special about this. All of our ancestors all over the world built this way at some point in history. I highly recommend this. This is a good way to build. If you notice, I'm applying it with an upward stroke to resist gravity, to help it stick to the wall better. And again, you could smooth this out, put a finish coat (one or two finish coats) and make it real nice looking.
For full text, please come to our Earthbag Building Blog.Pinning With Wire Versus Nailsnaturalhouses2011-04-07 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
This video will compare two pinning methods. We like to pin the corners of bags so they don't stick out in the plaster. I like to use these short pieces of wire that we've cut off at an angle. We've tried different cutting methods. The latest and best method is a hammer and chisel, and we just chop it. It's like a 30 degree angle. It's extremely sharp, almost like a needle. The other method looks like a 6d (6 penny) common nail. We pin each corner. We're going to let the video roll. We're each going to pin a bag and see how it goes. Also remember we're only pinning it a little ways, so we don't create large recesses. Ready? Go. Yes, it's done. So it's over twice as fast. Maybe with practice (pinning with nails) you could go a little faster. But still, these nails could fall out. This wire will not fall out. There's no way. I read on the Internet last night on some blog that stitching bags with wire was way too slow. So I got to thinking. I wonder what they're doing? I don't know. But here you go, here's some hopefully convincing evidence that it can be very fast and easy.Stone Facingnaturalhouses2011-03-29 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Getting the plaster on an earthbag wall nice and flat can be quite challenging. You can save plaster work by covering the rough plaster with stone. You can buy flat stone facing. This is sandstone. Or you can get stone from out on the prairie or up in the mountains. You want flat stone that will adhere to the wall easily. These are some samples that are commercially available. You just stack them like this. Alternate the seam (joint). And again, instead of buying it, you can get free stone -- that's what I've done -- like this. Sometimes it's from an ancient sea bed. It's out on the prairie or up in the mountains.Building Spec Houses for Salenaturalhouses2011-03-29 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Some natural builders may be interested in building houses for profit. One suggestion is to find out what people want in your area. And so we're going to look at a few houses here. This is what people are buying. These houses are made with brick, concrete and tile, but you could build the same thing, the same exact style using earthbags, straw bales, adobe, whatever. You know this is what people want and so you don't have to worry as much about selling the house. Just build what people want. These houses are very affordable. You see they're using a carport instead of a garage. No closets, no upper cabinets. The size is 24'x36' (864 interior square feet). So they're very small, very simple houses on small lots.Living Wall 2naturalhouses2011-03-28 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
We're building another living wall. The first one was built with fishing net. This one is being built with aluminum to improve the design. Our aluminum frame for the living wall is finished. Now we're going to mount it to the wall, which is made of brick and concrete. I've pre-drilled holes in the back, four holes. And now I've taken a red marker and marked the wall. Now I'm going to pre-drill into the masonry with our hammer drill. We're using plastic masonry anchors and screws to attach the metal frame to the wall. You just pound the plastic anchors into the wall like this. That's it. This is the finished living wall. Looks good. Visit our earthbag website for complete details (see link on side bar).Rice Hull Ashnaturalhouses2011-03-28 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Today we're experimenting with rice hull ash and road base. We're using a small measuring device so we can get about 10% rice hull ash. This is what rice hull ash looks like. It's hulls from rice that's been burned. It looks like ash from a forest fire. It's a natural pozzolan which can make the soil harder. We're going to start off with about 10%. I'm adding it in thin layers and tamping it. This will simulate an earthbag. Okay, it's pretty solid, just like you would tamp an earthbag. The idea is to use rice hull ash in replacement of cement. That big bag over there was only $3.60 and, of course, cement is much more expensive. Now we're making a second test block with no burned rice hulls, no ash, just the road base so we can compare the two blocks. We're just adding a little earth at a time, the same consistency, the same amount of moisture we put in earthbags. Just spread it out in thin layers. You notice the plastic on the tamper so it doesn't stick. So here's our finished rammed earth block with no ash. We'll see how they compare after they dry. This one had a little more moisture and seems like it's stronger, but then again this one has ash, which should add some strength, so we'll see. I noticed this was crumbly when I took it out of the form, which means it probably had a lack of moisture. Some people may think this is just earth, it can't be strong. But this is rammed earth, which can last thousands of years. You can learn more on our earthbag website. But just this here alone can last thousands of years. It gains its strength from clay. The clay is like a flat platelet, kind of like the shape of my hand. You put the platelets together and under pressure they create a molecular bond that's very, very strong. Very compact, very dense. So this can last for a very long time. We'll wait a little while and take it out of the form. Make sure you use very strong forms. And also note, you don't have to tamp it and you don't have to make it in blocks. This is just a test. You could build a whole wall in the same way, not individual blocks. So there are many things you can do with this technology. And this plastic -- we tested this out -- and it works really well. Here are the final blocks. You can see that this one had more moisture. You can see the smooth, solid clay on the top and even on the sides. You can see more pore space here, more small holes between the particles, so I'm guessing that this is going to be stronger even though we put the ash in this one over here to make it stronger. So we'll see in maybe a week or two. If you do this, I highly recommend metal forms. The wood form is just too fragile, too easy to break. And with a metal form, you could tamp it much harder and get very, very strong blocks.Rice Hull / Claynaturalhouses2011-03-21 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
We're experimenting with rice hulls and clay to make lightweight building blocks. We're using 25% rice hulls on our first test block. This is our first test block with a rice hull/clay mixture. This is not the most efficient way to mix it, of course, but we're just doing small samples. Normally you'd use a pit or a big tarp and mix it with your feet. On my first experiment with rice hull/clay about a year or two ago, I used too much moisture and too many rice hulls. Basically, it was almost all rice hulls with a clay slurry, and it molded. I opened up the bag a month later or so and it was all molded. So I'm using less moisture -- just enough to hold it together -- and fewer rice hulls. We're working during the dry season to reduce risk of mold. And in case you're wondering, humans have been working with fibers and clay, fibers and earth, since the beginning of history, but much of this knowledge has been lost so we're trying to relearn it. Here's our first rice hull/clay earthbag. Unfortunately, it's too wet. I think we have to make another one tomorrow. I think that's just the way it goes -- you just have to keep testing until you find something that works. We just put too much moisture. I made a second earthbag with this rice hull/clay mixture, and you can see it looks a lot drier. This looks pretty good to me. Here are the finished earthbags and block made with rice hull/clay mix. This is to make lightweight walls that also add some insulation.Termite Resistance of VetiverClaynaturalhouses2011-03-15 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
We're going to test the vetiver/clay block and the vetiver/clay earthbag by putting them on top of this termite infested wood and we'll see in a few months what happens to this. Here we are five months later and these vetiver/clay samples have been sitting on top of a termite mound out in the open. There's no visible, no observable damage from the termites. They're still in the same exact condition they were from the first day. So we think this is pretty good evidence of termite resistance from the vetiver grass.Insulated Bamboo Wallsnaturalhouses2011-03-15 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Today I'm going to demonstrate how to make insulated bamboo walls that can be used for interior walls or exterior walls. Start off by making a bamboo grid with vertical and horizontal members, like this. There are two layers -- a bottom and top -- with bags of rice hulls or straw as insulation in between. The bamboo is lashed together. You can look on the Internet and find the technique if you don't know how to lash wood or poles together. This is a square lashing with clove hitches with frapping. Here I used basically a trucker's hitch to pull the two layers of bamboo together to make a good thick insulated wall. This is just a very small prototype. Come to our website, our earthbag website, and you can read the article with all the details that explains exactly how to do this. So this is an insulated wall, but the same insulation can serve as soundproofing in the wall.Earthbag Suppliesnaturalhouses2011-01-03 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
These are the most common earthbag building supplies. This is a standard bag, a polypropylene bag, about 18"x30" measured flat and empty. This is fishing net or fishnet you can use in plaster work. It's not always required, but if you want it you can use fishing net. It's less expensive than other types. String line to keep everything straight. This is a metal anchor we use for attaching door frames and window frames. You nail into the earthbag and then screw into the wood. We have tie wire for closing our bags, or stitching the bags closed. We have fasteners, either fencing staples or nails. We have a bucket to show you soil, good moist soil, with a clay/gravel mix. We have a spool of barbed wire. And finally, a bundle of 500 bags. This roundhouse used exactly 500 bags.Earthbag Toolsnaturalhouses2011-01-03 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
These are the most common earthbag building tools. Starting out with a grape hoe, and one slightly larger called a grub hoe, for digging and filling buckets. We have an earthbag slider. You fill the bags on the slider and then pull it out from underneath. That way you can fill bags on the wall. We use a garden hose to moisten the soil so it is not too dry. This is a bucket chute. It's a 4-gallon bucket with the bottom cut off that we use to fill the earthbags. These are 2-gallon buckets for carrying cement. We use them to carry the soil to fill oure bags. We have different plastering tools, different trowels and a hawk to put the mortar on. Four foot level. We have two tampers -- a short one and a long one. Make different sizes. We have a string line, wire cutters, hammer, tape measure, and a metal chisel and a piece of scrap metal for cutting barbed wire. Bolt cutters are maybe easier if you have them, but this is an inexpensive alternative. A knife, shovel and a corner guide made with two 2x4s nailed together to keep your corners straight and plumb. That's it.Vetiver Clay Resultsnaturalhouses2010-12-06 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
In a previous video, we made vetiver clay blocks and a vetiver clay earthbag. This is the earthbag that after a few weeks I cut the bag away so we can take a good look at it. You can see that it's dense, very heavy, very strong. So I would say this was a successful experiment. We're happy with this.CEB Bond Beamnaturalhouses2010-12-06 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Today we're looking at how to build with compressed earth blocks or CEBs. These are made with mostly earth with about 10% cement. They're compressed in a machine, either by hand or motorized machine. And these pieces here help it align, so they're self-aligning. You just stack them like bricks. You have steel that goes up the center -- reinforcing steel, or rebar we sometimes call it. What do you do at the top? They make these special bond beam blocks. They're self aligning. You have the steel coming up and you have horizontal steel, and you fill this with cement (concrete). And this becomes your bond beam on top of the wall that ties everything together so your wall is strong.Finished Earthbag Roundhousenaturalhouses2010-10-27 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
This is the finished roundhouse that we built in 2010.Living Wallnaturalhouses2010-10-24 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
This is a living wall experiment. We have tubes of fishing net about 150 cm long (5'). We've filled it with potting soil and coconut husks. We fastened it to the wall. And soon we're going to put plants in here and over the next 6 months it should be covered with plants. Now, this is just a very small prototype to test the concept. You could do this on the outside of your entire house or large area, as much as you want. You can make it yourself at very low cost. It is just fishing net, nylon fishing net (fine mesh) with your growing medium inside. We have seams down the middle so that these tubes -- we have three tubes -- the tubes are about 6" or 15 cm in diameter. We cut holes in the fishing net, inserted the plants and then sewed the ends of the tubes shut. This is the final living wall.Rice Hullsnaturalhouses2010-10-24 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Rice hulls are an excellent building material. They have a high R-value, they are lightweight and easy to work with. They are also naturally fire resistant and meet U.S. building codes. You can put them in earthbags. Here's a standard 18"x30" earthbag. You can use this as a building block or possibly as roof insulation. And this here is a bigger 24" bag. So there are many things you can do with this. You can even make furniture. They make a very comfortable seat, much like a beanbag chair. These are rice hulls. It's the protective coating on the outside of rice. It's removed before you use the rice for food. Perhaps the best thing about rice hulls is the incredibly low cost. In some places, they're free. In this area they're about $25 for half a semi load -- a half semi-truck. The main expense is shipping, so try to get them locally and then the cost is almost for free.Custom Bagsnaturalhouses2010-10-18 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
It is best to start laying bags starting at the corners and doorways and work toward the center of the wall. And when you get to the center, you'll probably have these small spaces left. I call these custom bags. I'm going to demonstrate how to fill this gap with a small bag or custom bag. I just estimate about how much soil will fit here. Remember it will compress quite a bit. Just fold the bag over. And then just tamp it into the opening.Vetiver/Clay Blocksnaturalhouses2010-10-15 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
We're testing a new building system using something similar to straw/clay, but this is vetiver grass -- it is resistant to termites. We're going to mix water with clay and make a thin slurry. Pour it over the vetiver grass. Soak the grass until it is soft and then add more clay until you have a stiff mixture. We put the vetiver grass/clay mixture in a wood form to make building blocks, and we will let it dry a few days in the sun. And when it is dry then you can build with it. Soak the materials overnight to get the best working properties. Anyone can do this because the materials are very light and easy to work with.Vetiver/Clay in Earthbagsnaturalhouses2010-10-15 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Vetiver grass is termite and rot resistant and so we're experimenting with it to make earthbags and lightweight building blocks. We soak it in a clay mixture. The main idea here is we're trying to create a termite and rot-resistant, lightweight building system. Anyone can do this because the materials are lightweight and easy to work with.Roundwood Trussesnaturalhouses2010-10-15 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
If you live in an area with no building codes, you can build your own trusses with small diameter wood. It's less expensive, in fact, you can often get the wood for free, either in the forest or from tree farms that send it off to pulp mills. You can put it to better use than turning it into paper. You can build these roundwood trusses in many different shapes. This is just one example that we are demonstrating. If you use stakes, each truss will come out to be the same size and shape. We're using metal gussets, 1/16th galvanized metal plates that are screwed over each of the joints for strength. These are added to both sides, and the joints are coped so they fit together better. You could use a coping saw, a sawzall, or what I did I just took a handsaw and cut a V-shape so that it fits together. I also toenailed it with a nail to hold it in place so the truss doesn't move while you're working on it. You can screw or nail the gusset plates on -- screws are stronger. Peel the poles to prevent insect damage. You can use larger gussets where you have more pieces coming together. You can use nailing plates, pronged gussets, or in this case we just used scrap metal, galvanized metal. These trusses are virtually free.Enviro Dome Fly Throughnaturalhouses2010-08-11 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Take a fly-through tour of the Enviro Dome, one of my most popular earthbag plans. Please note, not every detail is shown. The loft vegas (wood poles) and wood stove, for instance, have been omitted for simplicity. But you still good a good sense of what the home looks like. Enviro Dome plans: http://earthbagplans.wordpress.com/2009/02/22/enviro-earthbag-domeTurning Bags Inside-Outnaturalhouses2010-08-11 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
In a different video, I explained how you can pin the corners of bags so the corners don't stick out. Here's another option. You can just turn the bag inside-out, where it looks like this. Here's a sample bag that shows what this looks like.Cement Plasteringnaturalhouses2010-07-19 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Step 1: Put cement between the bags in the gaps. Step 2: Add thin coat of cement over bags. Step 3: Add more cement. Step 4: Add more cement. Step 5: Trowel the plaster smooth.
Caution: Research the techniques used by plaster professionals in your area and follow their lead. The techniques in this video show what works in a rainy/humid climate, but they can cause problems in dry climates.Thatch Panelsnaturalhouses2010-06-17 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
For our roundhouse, we used these thatch panels. They're pre-made panels of thatch about 1.5 meters long. They've been sewn to a small piece of bamboo. They're stitched together with a piece of tree bark. And they're also flexible as you can see inside. We bent them around into the shape of a cone for the roof. This saved us several weeks of work. This whole roof was about $100 for the entire building. It took us one day instead of about one month.How to Make Square Cornersnaturalhouses2010-06-07 | Go to our Natural Building Blog where we answer questions. http://naturalbuildingblog.com
Create square corners using the 3-4-5 method. Use any multiple of 3, 4 and 5 as shown. Example: 3', 4', 5' or 6', 8', 10' or 3m, 4m, 5m.