Iron JonesyThis time we finish off the main lineshaft and get power back to the lathe. Lots more manual fitting here with the second coupler installation, and hand scraping a pillow block bearing for for the end of the new shaft.
LINESHAFT Upgrades Part 2 - Bearing Scraping & Final Fit UpIron Jonesy2026-09-20 | This time we finish off the main lineshaft and get power back to the lathe. Lots more manual fitting here with the second coupler installation, and hand scraping a pillow block bearing for for the end of the new shaft.
Thank you for watching!
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434Running Asquiths 1870 Planing MachineIron Jonesy2026-11-18 | This planer, built by William Asquith c1870 has been kicking about the workshop for a few months and it's now time to get it running! I install another section of lineshaft on traditional bronze bearings and drive it by a nice long belt from the main shaft. Then I take a few cuts, and figure out some teething issues. Hopefully so we can use it to make parts for the radial. Cheers!
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434TURNING The New Drive Shaft - Victorian Radial Drilling Machine Restoration PART 17Iron Jonesy2026-10-20 | Some serious progress on the radial drill this time as I get all the lathe work done on the new shaft we forged at Claymills pumping station! This was a bit of an unknown for as Id never made use of this much lathe bed all at once and I had no idea how the old Pratt lathe would perform. Really with the result though, despite the odd hiccup.
Thanks for watching!
Ps. If you want to come and see us at Claymills, we will be there in the forge this weekend - 24th-25th October for the last steaming of the year.
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434Major LINESHAFT Upgrades! Part 1Iron Jonesy2026-08-25 | Today I go through the process of taking down the main workshop lineshaft, installing traditional flange couplers and installing an extra hanger bearing to carry the extended shaft outside the front of the shop.
Thank you for watching!
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434The Man Powered Machine Tools that Built the WorldIron Jonesy2026-08-09 | I love an excuse to do something the old and awkward way, and recent upgrades to my main line shaft in the workshop meant I had to find a temporary alternative method of driving the lathe. Time to step back into the boots of early 19th century engineers like Henry Maudslay, Richard Roberts and George Stevenson and get a glimpse of what working in a heavy machine shop was like at the dawn of the steam age.
Further reading; -Henry Maudslay and the Pioneers of the Machine Age Cantrell, John; Cookson, Gillian -Life and Inventions of Richard Roberts 1789-1864 (Landmark Collector's Library) Hills, Dr. Richard L.How the Victorians Forged Machine Parts with Steam Power - Radial Drill Restoration PART 16Iron Jonesy2026-07-12 | It was a huge privilege to be able to use the Victorian forge at Claymills pumping station to forge a new drive shaft for my radial drill project. Using wrought iron, we built up a collar feature by forge welding a ring to the shaft. Great fun, and the steam hammer was the perfect tool.
A massive thank you to Will, for putting up with my silly ideas, Henry, for all the camera work, Ethen, for a quality job working the swages and of course Jacob and all the volunteers, for being so welcoming.
And as always, thank you so much for watching!
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434Another SEIZED Victorian Radial Drill!!Iron Jonesy2026-07-05 | Its been a very busy couple of months in the workshop, with little opportunity for filming projects. Here is an overview some of the new things that have been going on plus some exciting new projects!
A great article on the exhibtion with an engineering focus -tandfonline.com/doi/full/10.1179/1758120614Z.00000000053#abstractASSEMBLING the Spindle Drive - Victorian Radial Drilling Machine Restoration - PART 15Iron Jonesy2026-05-10 | After spending many hours working on individual parts, its finally time to install the bearings and drive shaft into the main head casting and so see some parts of this drill running under power for the first time!
Thanks for following along!
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434The Strange Quirks of Victorian Metal DrillsIron Jonesy2026-04-19 | This Butler pillar drill was made in Halifax, Yorkshire, at the end of the 19th century. I disassembled the spindle so that it would fit through the front door, with the intention of re painting it before it went back together. Unfortunately, I needed it for a small job first so, in this video, I reassemble the feed system, and hook machine up to a temporary drive.
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434The MAIN Bearing! Heat Treatment & Machining - Victorian Radial Drill Restoration PART 14Iron Jonesy2026-04-04 | The main bearing tube is causing me a bit of a headache, its refusing to clock in straight on the lathe and I'm not sure why. Is it bent? Is it just badly made? In this video we hopefully get to the bottom of it and end up with a nice part that will work well in the end!
Thanks for following along!
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434Proper, Wrought Iron Washers - Victorian Radial Drilling Machine Restoration PART 13Iron Jonesy2026-03-06 | This time on the radial project I'm forging and machining some new washers for the Column screws on the Victorian radial drill. What started as a very simple job that I almost didn't bother filming ended up going down a bit of a rabbit hole. I think it was all worth it in the end.
Thanks for following along!
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434Can I Forge an 1800s Flat Drill Bit?Iron Jonesy2026-02-17 | Hole making in metalworking shops before the advent of the twist relied on one, simple, hand made tool. I've been thinking about these for ever and today is the day I'm going to have a crack at making one. Let me know what you think!
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434Milling Machine Coolant 1920s StyleIron Jonesy2025-12-08 | A bit of quality time spent with my Denbigh Horizontal Milling Machine setting up the original coolant pump and testing it on some work pieces - T nuts for the shaper. Thanks for watching!
Link to 'The Various and Ingenious Machines of Captain Agostino Ramellii 1588' - a great flick through for anyone interested in early mechanics Plate 108: Device for two men to drain water from a marsh or foundation - digital.sciencehistory.org/works/9k41zd698Lets ASSEMBLE Some Gears! - Victorian Radial Drilling Machine Restoration - PART 12Iron Jonesy2025-10-21 | There's a lot to do this time. The main body of the radial drill comes indoors for the first time in 40 years so it can finally be painted. After that, there's nothing stopping me putting a few parts back together, along with some light forging at the end!
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434Some New (1890s) Machines for the LINESHAFT Workshop!Iron Jonesy2025-09-14 | An introduction to some new machines to the collection! I'm super excited to get these running in the workshop with the others! the collection of 1890s machine tools in nearing completion.
Follow me; instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434Why was it so STUCK? Brazing Repair & Critical Analysis - Victorian Radial Drill Restoration PART 11Iron Jonesy2025-08-18 | A breakdown on why the Radial arm drill spindle was so stuck inside its bearing. Ill also carry out some urgent repairs to damage sustained while I was trying to free it off!
Cheers!
Follow me - instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434VICTORY AT LAST! - Victorian Radial Drilling Machine Restoration PART 10Iron Jonesy2025-07-27 | The spindle is turning out to be more of a challenge than the stuck column on this radial drill rebuild! I have a few new methods to try and some bigger, better, hotter equipment to try. Let's see if we can get it out this time.
Cheers!
Follow me - instagram.com/iron_jonsey facebook.com/profile.php?id=61577925763434Some PRESSING Issues! - Victorian Radial Drilling Machine Restoration PART 9Iron Jonesy2025-06-28 | Continuing with the belt driven Radial Drill. The last stuck piece, the spindle, is still locked inside the quill. I'd rather not cut the spindle out of the quill and believe it can be saved with a bit of perseverance!
Cheers!
instagram.com/iron_jonseyIll Let This 130 Year Old Shaper do the TalkingIron Jonesy2025-06-15 | This is something a little different from usual. Machining some T nut stock on the 1890s Redman shaper driven of course by the lineshaft. One of the many ways to make T nuts, definitely the slowest, but possibly the coolest. The T nut blank is ready to be sliced into individual T nuts before they are drilled and tapped. Anyway, Ill let the shaper do the talking. Cheers!
Instagram - instagram.com/iron_jonseyDE-RUSTING Parts with MOLASSES - Victorian Radial Drilling Machine Restoration PART 8Iron Jonesy2025-05-31 | The radial drill project has left me with a lot of chunky cast iron parts that need de rusting. Its the perfect time to try something I've been meaning to try for ages - Molasses as a liquid rust removal solution. This is how I went about cleaning up all these incredible gears, shafts and pulleys, and I'm pretty pleased with the results!
Bit of a short one today but I don't want to waffle on too long!
- Follow my Instagram for regular project updates and what ever else happens to be going on! instagram.com/iron_jonsey
Cheers!Fixing Broken Castings by Stick Welding - Victorian Radial Drilling Machine Restoration PART 7Iron Jonesy2025-05-03 | This time I go through the cast iron welding process that I use to fix broken parts. I'm using Nickel cast iron welding electrodes (forgot to mention that in the video!) to repair a cracked spoke in the feed hand wheel and also add on new material to repair the broken power feed engagement lever!
Really excited to be beginning proper clean up and repairs! Thanks for watching!
- Follow my Instagram for regular project updates and what ever else happens to be going on! instagram.com/iron_jonsey
-Cheers!Reassembling the Largest Castings! - Victorian Radial Drilling Machine Restoration PART 6Iron Jonesy2025-04-14 | A huge moment on the Victorian radial arm drill restoration project - Its time to start putting bits back together! I reassemble the largest castings, the bed, column and the arm so the machine can go inside and get painted!
We are another step closer to having this old machine drill some holes!
Instagram - instagram.com/iron_jonseyFREEING THE SPINDLE! - Victorian Radial Drilling Machine Restoration PART 5Iron Jonesy2025-03-30 | This time on the Victorian radial drill restoration project I take on the drilling head and begin to free off and remove as much of the parts as possible. The spindle/quill assembly still needs extra work but we are extremely close to having the entire drill completely stripped down - Hope you enjoy the update!
We are another step closer to having this old machine drill some holes!
Instagram - instagram.com/iron_jonseyBaler Roller Repair | Welding & Re Machining on the Victorian LatheIron Jonesy2025-03-14 | Three rollers from a round baler were brought in to the shop having been worn out after bearing failures. The two smaller belt tensioning rolls and also the larger main belt drive roll. This was the perfect job for my largest lathe, the 1890s F. Pratt & Co from Halifax, Yorkshire. Hope you enjoy this little job in a belt driven workshop. Cheers!
Instagram - instagram.com/iron_jonseySWIVELLING THE COLUMN! - Victorian Radial Drilling Machine Restoration PART 4Iron Jonesy2025-02-15 | A huge moment in the restoration of this machine! The very stuck column swivels in the arm for the first time in probably 60 years. This is the story of how I did it!
Instagram - instagram.com/iron_jonseyBrass Casting Adventures - Makers Plaques, Matchplate Patterns and Coal Fired Crucible FurnaceIron Jonesy2025-01-29 | Having a go at casting some makers plaques and a matchplate pattern I have been working on, with a few lessons learnt! I have cast Brass a handful of times in my workshop and this is how I go about it in my ordinary blacksmiths coal forge.
Thanks for watching!
instagram.com/iron_jonseyFlat Belt Pulleys - How are they fixed to the shaft?Iron Jonesy2025-01-17 | The large flat belt pulley that I've been working on gets installed on shafting that was originally installed in 1899. Also covering the way I forged, machined and fitted the gib key that locks the pulley to the shaft. Thanks for watching!
instagram.com/iron_jonseyVictorian Radial Drilling Machine Restoration PART 3 - Extracting Seized Screws & Removing the ArmIron Jonesy2024-12-13 | More progress on the radial! I wanted to get the arm off and lie it down so it could be filled with a derusting solution. The first step towards trying to get it to swivel about its column. Before that I had to carefully remove the head traversing rack so it can be cleaned up with the other loose parts.
Cheers!Cutting an Internal Keyway with an 1890s Shaper and Forging the Tool!Iron Jonesy2024-11-25 | Using my Redman traveling head shaper to deepen the keyway in a large flat belt pulley. I also needed to make a slotting tool for the job - this was forged, to keep things as historically appropriate as practical!
Link to the fantastic video by @Rustinox explaining shaper speeds and generating the speed chart. - youtube.com/watch?v=sBKe7cW6OHc
Thank you for watching!Machining a Large Flat Belt Pulley with my Antique LatheIron Jonesy2024-11-11 | Making full use of the old F. Pratt lathe today to bore out this large split pulley and also getting the first use out of the crane! (sort of)
Cheers!
Instagram - @iron_jonsey (yes its meant to be spelt wrong)Hand Forging a Victorian Workshop Jib Crane - The last parts and AssemblyIron Jonesy2024-10-27 | Today I finish the Jib crane! This is going to be very handy above my old lathe for manoeuvring heavy chucks, faceplates and parts on and off it.
Thanks for watching! Watch for updates on instagram - @iron_jonseyVictorian Radial Drilling Machine Restoration PART 2 - A Sticky PinionIron Jonesy2024-10-04 | I've been making some great progress on the radial project. Lots of parts freeing up and coming off, including getting out the big guns to have a go at the stuck pinion. Thanks for watching!
Apologies for the sketchy audio in this, It was a very windy day!A collection of clips from a recent turning job for a friend.Iron Jonesy2024-09-19 | ...Victorian Radial Drilling Machine Rescue PART 1 - Initial DisassemblyIron Jonesy2024-08-23 | This is one of my favourite machines, and probably in the worst condition of them all - Fully seized and missing parts. This is the first instalment of the long road from taking this radial drill from the verge of being scrapped, to drilling holes again. Thanks!Lineshaft Driven Machine and Blacksmith Shop TourIron Jonesy2024-08-01 | A proper look around my workshop as it currently stands! Around 50 feet of shafting and 9 running belt driven machines packed into a garage sized shed. Thanks for watching! instagram - iron_jonseyForging a Jib Crane for my Victorian Metal LatheIron Jonesy2024-06-03 | What started as a basic need for a basic lift gear has turned into a full on historic project. After seeing the crane at The Welsh Slate Museum I had to have one of my own. In this video I go though the steps of how these kind of cranes may have been made in the 19th century, while hopefully building one that will be useful in the workshop! Thanks for watching. If you haven't been to visit the Slate Museum, I highly recommend it.
Instagram - Iron_Jonsey1890s Shaper Rebuild and First Run! - Belt Driven Machine ShopIron Jonesy2024-05-07 | After making a bush and some shaft straightening, its finally time to reassemble the Boynton & Plummer shaper.Belt Driven Blacksmiths Ring Rollers Restoration!Iron Jonesy2024-04-21 | I wanted to put a video together to show all the work I had to do to get these ring rollers running. Some major parts were missing, and this is the story of how I made them and returned the machine to its original configuration! thanks for watching!
Instagram- iron_jonseySquare Threading a New Leadscrew Nut for my Boynton & Plummer Shaper - Belt Driven Machine ShopIron Jonesy2024-04-07 | Working on some repairs to a B&P Shaper currently in the shop. In this video I make a new nut for the leadscrew using my belt driven Drummond lathe with its original reversing set up - Hope you enjoy!
Instagram - iron_jonseyRunning a 120+ year old Travelling Head Shaper for the First Time - Belt Driven Machine ShopIron Jonesy2024-03-22 | In this video I get my travelling head shaper running and do some test cuts on an old cylinder head. This shaper was built by Redman in Halifax, England around 1900 Please do subscribe to keep up to date with the shop Instagram - @iron_jonesy Wills Instagram - @steam_workshop_uk Thanks for watching!Trimming and drilling T nuts #drill #lathe #machine #machineshop #workshop #millingIron Jonesy2023-05-13 | ...Two lineshaft driven lathes churning out the parts 💪 #machine #lathe #machineshop #drill #workshopIron Jonesy2023-04-02 | ...Belt Driven Bench Drill on the Lineshaft - first hole after setting up with a faster speed!Iron Jonesy2023-02-13 | ...Denbigh Mill First Run, Split Pulley Bushing and Lacing Flat Belts - Belt Driven Machine ShopIron Jonesy2023-02-05 | The first run of my Denbigh universal milling machine after machining a pulley bush, installing the main driver pulley and belts www.instagram.com/iron_jonseyBelt driven machine shop working on custom gate hinges 💪Iron Jonesy2023-01-06 | ...Drummond Toolpost Repair Job + Thread Cutting on Old Lathes - Belt Driven Machine ShopIron Jonesy2022-12-31 | A quick repair job I needed to do on my 5" Drummond lathe. I briefly talk about how to pick up threads on very old lathes without a thread dial.
Instagram - instagram.com/iron_jonseyRe Steeling a worn out axe head with Blacksmith, Alec JonesIron Jonesy2018-12-27 | In the days when axes were made using two materials, Wrought iron for the body and high carbon steel for the blade, the steel edge would wear away to nothing after years of use and sharpening. This left the axe with a useless, wrought iron edge. When an axe got to this stage, it was common, not to buy a new one, but to have a blacksmith fire weld on a new steel 'bit', giving the axe a second life and a few more generations use.
This particular axe, we believe to be pre WW2, belongs to a friend of mine, who found it buried in some woods. As found, the shape of the blade was very deformed, and it was evident, especially at the toe, that the old steel edge was long gone.
This is the method I used to restore the axe to what I believe to be more like the original shape. I hope you enjoy the process!BLACKSMITHING - Fire welding traditional scrollworkIron Jonesy2016-10-12 | Just a short clip of forge welding the scroll work on to the top of some back stiles for a double gate.