🌀Polaris 280 Hose Tangled? 🏊‍♂️ Simple Fix That Works All Year ☀️

diy collaborative 2026-09-30 | 🌀Polaris 280 Hose Tangled? 🏊‍♂️ Simple Fix That Works All Year ☀️

Polaris Head Float

diy collaborative 2022-11-10 | Thank you for checking out our video.

In this quick video, we’ll show you how to check the head float on your Polaris 280 pool cleaner. If your pool cleaner is laying on its side when running, then there’s an easy way to check this.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and the replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be challenging to keep them on hand but most of the components can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

To check if the head float needs replacing simply remove it from the feed pipe and shake it to see if there’s any water inside. Over time the head float can get a tiny hole in it causing it to take on water. When this happens it’s no longer able to run in the upright position and needs to be replaced.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Head Float: amzn.to/3fpKM86
Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Polaris Sweep Hose Adjustment

diy collaborative 2022-11-03 | Thank you for checking out our video.

In this quick video, we’ll show you how to make adjustments to the sweep hose adjustment on your Polaris 280 pool cleaner.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance and replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be challenging to keep them on hand but most of the components can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

To adjust the sweep hose movement, look for the screw or set screw on the side of the feed pipe on the back of the Polaris where the sweep hose connects. To decrease the motion of the tail, simply turn the screw clockwise. To increase the motion, turn the screw counterclockwise. You may need to make several adjustments to obtain the optimal desired movement.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Polaris Thrust Jet Adjustment

diy collaborative 2022-10-27 | Thank you for checking out our video.

In this quick video, we’ll show you how to make adjustments to the thrust jet on your Polaris 280 pool cleaner.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and the replacement of certain parts. Anyone that has one of these cleaners probably already knows what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be challenging to keep them on hand but most of the components can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Polaris Pressure Relief Valve Replacement

diy collaborative 2022-10-20 | Title: Polaris 280 Pressure Relief Valve Replacement
Published: 10/20/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to replace the pressure relief valve on your Polaris 280 pool cleaner.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and the replacement of certain parts. Anyone that has one of these cleaners probably already knows what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too high and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be challenging to keep them on hand but most of the components can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Sika Concrete Patch

diy collaborative 2022-10-13 | Title: Sika Concrete Patch
Published: 10/13/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to use SikaQuick Patch for concrete to make a simple fast repair. If you have holes or spalls in your concrete driveway, sidewalk, patio, or any concrete foundation, this is a fast and easy way to make a repair. It mixes right in the bag and no water is required.

In this video, we’re showing you how to make a repair without any tools. A concrete trowel or putty knife would be ideal, but it’s not really required to complete a repair with this stuff. It’s ready in about 1 hour and sets completely after 24 hours.

The idea is to seal up any spots like this in your concrete, especially outside and if you live anywhere that it freezes. A spot like this can get water in them and then when it freezes, it can cause the hole or spall to increase in size and cause major issues. Not to mention that it looks terrible when you have a crack or a spot like this.

Because of the ease of use, we’ll definitely be getting some more of this product.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

SikaQuick Patch: amzn.to/3rFjE7P
Flooring Trowel: amzn.to/3EFfepl
Grouting Sponge: amzn.to/3SZZ8ua

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

#diycollaborative

Happy Friday #shorts

diy collaborative 2022-10-07 | #shorts I wanna be like the big dog!

Music By - https://www.bensound.com/royalty-free...

#diycollaborative

Polymeric Sand

diy collaborative 2022-10-06 | Title: Polymeric Sand
Published: 10/06/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to use polymeric sand for the joints on a brick project we did on our patio. This is simple to use, dresses up the way it looks, and helps reduce weed growth.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

How to set a manual pool timer

diy collaborative 2022-09-29 | Title: How to set a manual pool timer
Published: 09/29/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to set a manual swimming pool timer.

Amazon Affiliate Links:

Time Switch Clips for Pool Timer: amzn.to/3BxmYrj
Pool Timer Clips: amzn.to/3RCPEol

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

#diycollaborative

This feels so good! #shorts

diy collaborative 2022-09-23 | #shorts

Music By - https://www.bensound.com/royalty-free...

#diycollaborative

How to Destroy Documents

diy collaborative 2022-09-22 | Title: How to Destroy Documents
Published: 09/22/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to destroy sensitive documents without a shredder. We have a crosscut paper shredder but I’m always looking for alternative ways to do things.

Our crosscut shredder is noisy and takes a lot of time, especially when shredding full-sized documents. Most of the time it can only handle about 3-5 pages at a time.

We’ve also tried burning documents which can take time and depending on surrounding conditions, can be risky. Also with the recent drought experienced in some areas, not really a good idea to have a document fire.

As an alternative, try pulping the documents.

Place documents in large bucket or trash can and fill with water and let soak for a day or more if possible. Then take a paint mixer, drywall mud mixer or garden auger and attach to drill and mix until destroyed.

Let the pulp mix dry and recycle or compost.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

For business inquiries please contact: don@thediycollaborative.com

#diycollabortive

Pool Backwash DE Filter

diy collaborative 2022-09-15 | Title: How to Backwash Pool Filter DE
Published: 09/15/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to backwash your swimming pool filter that uses diatomaceous earth or DE. In this video, we are working on a pool with a Pentair filter that has filter grids. Once the backwash process is completed, new DE is introduced into the system which coats the filter grids or elements and provides the most efficient filtering action.

Just follow our easy steps to have a clean filter and a great-looking pool.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

For business inquiries please contact: don@thediycollaborative.com

Floating Solar Water Feature

diy collaborative 2022-09-08 | Floating Solar Water Feature
Published: 09/08/2022

Floating Solar Water Feature

Thank you for checking out our video.

In this quick video, we’ll show you how to create a simple patio solar water feature. We already love using solar lighting in our landscape and we recently found this floating solar water pump and used it with some items we already had to create a simple DIY water feature for our patio.

Just follow our easy steps in this video and you will be pleased with the outcome.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Solar Fountain Pump: amzn.to/3MQuKyO
AISITIN 3.5W Solar Fountain Pump Built-in 1500mAh Battery, Solar Bird Bath Fountains with 6 Nozzles, for Bird Bath,Fish Tank,Pond or Garden Decoration
Outdoor Solar Water Fountain Pump: amzn.to/3zAr0yK

AISITIN 2.5W Solar Fountain Pump, DIY Outdoor Solar Water Fountain Pump with 6 Nozzles and 4ft Water Pipe, Solar Powered Pump for Bird Bath, Ponds, Garden and Fish Tank Pond and Other Places

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com
#diycollaborative

Frigidaire Air Filter

diy collaborative 2022-09-01 | Title: Changing Frigidaire Air Filter
Published: 09/01/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to change the air filter in your Frigidaire refrigerator.

Refrigerator Model Number: FGHB2868TF7
Air Filter Model Number: 5303918847

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Air Filter 3 Pack: amzn.to/3HkkBJE

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Frigidaire Water Filter

diy collaborative 2022-08-25 | Changing Frigidaire Water Filter for Ice & Water FGHB2868TF7

Published: 08/25/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to change the water filter in your Frigidaire refrigerator.

Refrigerator Model Number: FGHB2868TF7
Water Filter Model Number: EPTWFU01

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Water Filter 2-Pack: amzn.to/3aP3EuC
Water Filter Single: amzn.to/3Hm6nI9

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Automatic Chlorine Feeder

diy collaborative 2022-08-18 | Published: 08/18/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to refill your pool automatic chlorine feeder. In this case the Pentair model 320.

This simple process takes just a few minutes to replenish the feeder with chlorine tablets.

We recommend wearing protective gloves when handling the chlorine tablets.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:
Pool Lube: amzn.to/3PEE2A9
Pool Lube 2-Pack: amzn.to/3bfd2IM
Pentair Inline Chlorine Feeder: amzn.to/3zbkAUI
Chlorine Tablets: amzn.to/3OFzf03
Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Polaris 280 Wheel Replacement

diy collaborative 2022-08-11 | Title: Polaris 280 Wheel Replacement
Published: 08/11/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to replace the wheel on your Polaris 280 pool cleaner.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be difficult to keep them on hand but most of the parts can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All-Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative #swimmingpool #polaris280

Polaris 280 Tire Replacement

diy collaborative 2022-08-04 | Title: Polaris 280 Tire Replacement
Published: 08/04/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to replace the rubber tires on your Polaris 280 pool cleaner.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be difficult to keep them on hand but most of the parts can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All-Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative #swimmingpool #polaris280

Polaris 280 Bag and Tail Scrubber

diy collaborative 2022-07-28 | Title: Polaris 280 Bag and Tail Scrubber
Published: 07/28/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to empty the waste bag and replace the tail scrubber on your Polaris 280 pool cleaner.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be difficult to keep them on hand but most of the parts can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All-Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative #swimmingpool #polaris280

Polaris Idler Wheel Replacement

diy collaborative 2022-07-21 | Title: Polaris 280 Idler Wheel Replacement
Published: 07/21/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to replace the Idler Wheel on your Polaris 280 pool cleaner.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be difficult to keep them on hand but most of the parts can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All-Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative #swimmingpool #polaris280

Polaris 280 Tail Replacement

diy collaborative 2022-07-14 | Title: Polaris 280 Tail Replacement
Published: 07/14/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to replace the tail (Sweep Hose).

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be difficult to keep them on hand but most of the parts can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All-Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative #swimmingpool #polaris280

Polaris 280 First Aid Kit

diy collaborative 2022-07-07 | Title: Polaris 280 Spare Parts
Published: 07/07/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to keep a small pool cleaner replacement parts kit on hand to service your Polaris 280 pool cleaner.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be difficult to keep them on hand but most of the parts can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All-Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative #polaris280 #swimmingpool

Polaris 280 Replacing Wheel Bearings

diy collaborative 2022-06-30 | Title: Polaris 280 – Replacing Wheel Bearings
Published: 06/30/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to replace the wheel bearings on your Polaris 280 pool cleaner.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be difficult to keep them on hand but most of the parts can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All-Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative #polaris280 #swimmingpool

Landscape Edging

diy collaborative 2022-06-23 | Landscape Edging Makeover
Published: 06/23/2022

Thank you for checking out our video.

In this quick video we’ll show you how to repurpose metal landscape edging. We’re changing some of our existing landscaping that has tired metal landscape edging. For any sections of the edging that can be repurposed, we’re bringing them back to life by straightening, cleaning and repainting them.

The main purpose here is to show you that old things can be new again!

By doing this you can save money and improve the way your existing landscaping looks with new-looking edging.

Music By - https://www.bensound.com/royalty-free...

#diycollaborative

Solar Water Feature

diy collaborative 2022-06-16 | Solar Water Feature
Published: 06/16/2022

Thank you for checking out our video.

This quick video will show you how to create a simple patio solar water feature. We already love using solar lighting in our landscape and we recently found this solar water pump and used it with some items we already had to create a simple DIY water feature for our patio.

Just follow our easy steps in this video and you will be pleased with the outcome.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Outdoor Solar Water Fountain Pump: amzn.to/3zAr0yK
Solar Fountain Pump: amzn.to/3MQuKyO

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Tuff Shed

diy collaborative 2022-06-09 | Published: 06/09/2022

Thank you for checking out our video.

In this video, we’ll show you the preparation and installation of our new Tuff Shed.

We had a much smaller shed that was pretty run down and were considering trying to bring it back but once we dug in, we realized that it had major water and termite damage, so it was time for demo.

We have another small shed that we use primarily for lawn equipment, yard tools etc., but we also wanted something where we could have a work area for other projects.

We considered several options and ended up looking at our local Home Depot at the Tuff Shed display they have. After deciding on our favorite and a size that we thought would suit our needs and budget, we started the process.

We started working with Home Depot but ended up working directly with Tuff Shed. They had a representative come out to our home and inspect the site where we wanted to place the new shed.

From the time we agreed on our favorite design and placed the order, it was only going to be a couple weeks, so that gave us time to ready the site.

The site we picked was already pretty level, but we decided for added drainage and appearance to add decomposed granite. Our site did need a bit of leveling on one side and we allowed a 36” border on three sides so we order 3 yards of decomposed granite. On the front side where the door will be is a concrete driveway.

After getting the decomposed granite spread, level, and compacted the site was pretty much ready and we only had a few small tree limbs to trim as we didn’t want them interfering with the roof of the new shed.

We had our tentative install date and the morning of the installation, the team phoned to say they were on their way. Five hours after they arrived, the installation was completed.

The entire building comes partially assembled and the majority of the components already had primer. As one worker started on the base the other started unloading and staged the walls and other large components. Once unloaded he started painting everything with the color we selected.

After final assembly, all nail holes were filled, and another coat of paint was applied.

All in all, we are very happy with our selection and the service that we received.

Tuff Shed Details:
The Sundance Series TR-700
10’ x 12’
2” x 6” Hot Dipped Galvanized Steel Floor Joists
¾” Tongue and Groove Floor Decking
Aluminum Door Threshold
Composite Shingles
Workbench
Vents
2 Windows

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Music By - https://www.bensound.com/royalty-free...

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Compost

diy collaborative 2022-06-02 | Title: Composting
Published: 06/02/2022

Thank you for checking out our video.

In this quick video we’ll share with you a few ways that we compost.

Hunter PGP Sprinkler Head Replacement

diy collaborative 2022-05-26 | Published: 05/26/2022

Thank you for checking out our video.

This quick video will show you how to replace a Hunter PGP Sprinkler Head.

If you have an irrigation system or sprinkler system, you’ll likely encounter repairs that need to be made. We’ll show you exactly how to replace the entire head and make the necessary adjustments in this video.

I’ve also placed links in the description for the replacement head, Hunter adjustment tool, and a few other items that we used in the video.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Hunter PGP Sprinkler Head: amzn.to/3yVMju8
Hunter 3 Pack Adjustment Tool: amzn.to/3MNi4ty
Hunter Adjustment Tool: amzn.to/3NCuXq6
Hori Hori Garden Knife: amzn.to/3GyVp1T
Hunter 3 Pack Protective Rubber Cap: amzn.to/3MOTCrE
Hunter 3 Pack Nozzle Insertion Collar: amzn.to/39TElam
Hunter PGP Nozzle Kit: amzn.to/39Y6qNX
Sprinkler Head Wrench: amzn.to/3PDm0yV
Irrigation Shovel: amzn.to/3lOMKyo
Sharp Shooter Shovel: amzn.to/3PIa4vO
Round Nose Shovel: amzn.to/3GnC4k6

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative

Light Cover

diy collaborative 2022-05-19 | No-Pest Outdoor Recessed Light Cover
Published: 05/19/2022

Thank you for checking out our video.

In this quick video we’ll show you how install the No-Pest Outdoor Recessed Light Cover.

• Keeps fixtures pest free
• Retrofit to any recessed light fixture
• Easily removable by twisting to change bulbs
• Low profile
• Paintable

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Recessed Light Cover: amzn.to/3FcQB1q
Recessed Light Cover (2 Pack): amzn.to/3KzwNX9
Black + Decker Cordless Drill/Driver: amzn.to/3KAcZCR
Black + Decker Cordless Screwdriver: amzn.to/3ONP4mO

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

Wiper Blade Replacement

diy collaborative 2022-05-12 | KIA 2015 Sorento Wiper Blade Replacement

Published: 04/05/2022
Features: KDM_CURT

Thank you for checking out our video.

In this quick video, we’ll show you how to change the wiper blades on a KIA Sorento. On many vehicles this process is similar, but this video is the 2015 KIA Sorento. Anyone can do this and save yourself some money.

We’re featuring Curtis today with the YouTube channel KDM_Curt and he’s going to step us through the simple process. His channel is really fascinating, where he shows you how to install parts and modifications on a 2022 KIA Stinger. There’s a link in the video and the description below, so be sure to check out his channel and even his Instagram for some really cool car tips and tricks, car meets, and even some product reviews.

If your vehicle is one like Curtis mentions in this video that has to be placed into maintenance, be sure and head over to his channel where he shows you exactly how to accomplish this.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Thanks again to Curtis for being our featured YouTube channel guest on the DIY Collaborate.

Be sure to check out his channel at: youtube.com/c/KDMCurt/featured

And his Instagram at: instagram.com/kdm_curt

For business inquiries please contact: don@thediycollaborative.com

2001 Chevy Tail Light Bulb Change

diy collaborative 2022-05-05 | Published: 05/05/2022

2001 Chevy Tail Light Bulb Change

Thank you for checking out our video.

In this quick video we’ll show you how to change out a burnt out tail light bulb in a 2001 Chevy Silverado pickup.

This is an easy process that can save you money.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

SKIL Rechargeable 4V Cordless Screwdriver amzn.to/3uLBGIm
SKIL Rechargeable 4V Cordless Screwdriver with Bits amzn.to/3rLhHrc
Bulb Grease amzn.to/39ijbCp
3157 Philips Automotive Light Bulb, 2 Pack,White amzn.to/3F0Jkli

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

How to Change KIA Sorento Air Filter

diy collaborative 2022-05-01 | How to Change KIA Sorento Air Filter
Published: 05/01/2022
Features: KDM_CURT

Thank you for checking out our video.

In this quick video, we’ll show you how to change the engine air filter in a KIA Sorento. On many vehicles this process is similar, but this video is the 2015 KIA Sorento.

We’re featuring Curtis today with the YouTube channel KDM_Curt and he’s going to step us through the simple process. His channel is really fascinating, where he shows you how to install parts and modifications on a 2022 Stinger GT1. There’s a link in the video and the description below, so be sure to check out his channel and even his Instagram for some really cool car tips and tricks, car meets, and even some product reviews.

So stick with us for just a minute and we’ll be right back and step you through this simple process that can save you money.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

For business inquiries please contact: don@thediycollaborative.com

Thanks again to Curtis for being our featured YouTube channel guest on the DIY Collaborate.

Be sure to check out his channel at: youtube.com/c/KDMCurt/featured

And his Instagram at: instagram.com/kdm_curt

Solar Light

diy collaborative 2022-04-21 | Published: 04/21/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to repurpose an old electric chandelier into a solar light.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Be sure and check out some cool lamp builds at youtube.com/channel/UCWxlwtausAAq6kJmesvAO4w/featured

Amazon Affiliate Links:

Solar Lights: amzn.to/3KvxkKq
amzn.to/378MZRl
amzn.to/3JmqHsx

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative
For business inquiries please contact: don@thediycollaborative.com

DE Filter Grids Replacement Tip

diy collaborative 2022-04-14 | Published: 04/014/2022

In this video, we’ll show you how to replace the DE filter grids in a Pentair Pool Filter.

Should you not be comfortable working on your pool equipment, please contact a professional but please know that it’s fairly easy to work on once you know-how.

This filter operates under high pressure when on so be sure that your pump is in the full off position with the power turned off during maintenance. When working on the unit be sure to use caution at startup as air can be trapped in the system. If not correctly installed, the lid can be blown off possibly causing injury.

So, in this case, the filter uses DE or Diatomaceous earth as the substance that filters the water. The filter cloth on the grids merely supports the DE. You should not operate your filter in excess of 3 minutes without the use of DE.

We’ll not get into showing how to backwash or the introduction of DE after servicing during this video but will have those videos on our channel soon for you to check out. We’ve also got another video on our channel already about changing out the filter grids, but we think this new process may be much easier and we wanted to share it with everyone.

So please remember, this video is strictly about replacing the filter grids.

Typically, you would want to perform a backwash cycle before getting ready to clean or replace the grids but for this video, we did not perform this step.

We had several other things going on with the pool and wanted to see exactly what the grids looked like immediately after opening the filter case.

Much to our surprise, the grids were a deep blue color. Normally if opened without backwashing the DE material would appear as an off-white dirty color.

Before having issues, the filter had been recently backwashed, and the water had tested the previous week as okay.

We had several things going on in our backyard including the replacement of our concreate patio which involved demo and removal of old concrete and pouring of new concrete. For a period of about 5 days, the pool equipment was turned off.

While we’re still not sure what caused the blue color, several people on a Facebook group on Pool Care that I’m a member of speculated that it might be the chemicals we were using. However, it was the exact same chemicals we’ve always used.

Following shutting the power off to your unit, you need to relieve air pressure from the system.

To accomplish this your filter should have an air relief valve on it as this one does on the top of the case. Open this to relieve the air pressure inside the system and leave it open. It’s a good idea to leave the valve in the open position and wait just a bit to allow the pressure within the system to bleed off.

Next, you will want to loosen the main clamp on the filter tank. Do this slowly by loosening the nut slowly at first. Don’t remove it all the way at first.

It may be necessary to wiggle the top section of the tank but water should start to flow from the area between the two case sections if any still remains inside the filter.

The tip is that you assembly the entire grid assembly outside of the filter case. I didn’t realize this during one of our earlier videos but tried it this time and it is super simple.

You simply place the Spider, grid locator to where you can work on it and position the new or cleaned grids in the locations on the spider. There are 8 grids total and one is smaller than the others and this is marked on the spider as ‘Small Grid’.

Just carefully position all of them in place. Once you have all of them in position there’s what they call a filter template that goes in place next and it’s to help you line everything up at the top before placing the manifold on the top. Once you have the manifold positioned correctly, the two nuts can be secured in place. Be careful not to overtighten these when snugging them down.

Now you have a fully assembled filter grid ready to be placed back in the filter case.

I’ve already cleaned the filter case top and bottom and inspected all the O-rings. Before placing the grid assembly back in place I’m taking one more chance to inspect everything and put lubricant on the O-rings.

Thanks for watching!

Amazon Affiliate Links:

Note: Before ordering replacement parts for your pool equipment, be sure to check for the correct model number, etc. Your owner’s manual should have the correct part number and description needed. In some cases, you may even be able to find this information on a label on the equipment the part is needed for.

In this video we are working on a Pentair FNS Plus Model #: FNSP60

Replacement Grid Set: amzn.to/3urlgnT
Pentair Complete Band Assembly Clamp: amzn.to/3JtcxFK
Air Relief Valve: amzn.to/378SUFV

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Swimming Pool

diy collaborative 2022-04-07 | Swimming Pool Cleaning Tip

Published: 04/07/2022

Thank you for checking out our video.

In this quick video, we’ll show you a great pool cleaning tip.

Amazon Affiliate Links:

Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All-Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Linktree: https://linktr.ee/diycollaborative
For business inquiries please contact: don@thediycollaborative.com

Samsung Refrigerator Adjustable Door Shelf Tip

diy collaborative 2022-03-31 | Samsung Refrigerator Adjustable Door Shelf Tip

Thank you for checking out our video.

In this quick video, we’ll show you how to remove and adjust the shelves in the door of your Samsung Refrigerator. Samsung refers to these as Door Bins

These can get dirty and may need to be removed for cleaning or may just need to be adjusted depending on what you store in them.

It may also help to remove the door bins when attempting to remove the bottom shelf or vegetable and fruit drawers for cleaning, etc.

Just follow my easy steps in the video and you should be okay!

Model #: RF28HMEDBSR

Amazon Affiliate Links: Be sure to check your specific model number to make sure any of these will fit.

amzn.to/36jEDAL (Clip) Samsung DA61-03166A Vegetable Cover Fixer amzn.to/2ZJbkoC Samsung RF28HMEDBSR/AA 4-Door French Door Refrigerator amzn.to/2rL9uHg Samsung DA97-08402A Refrigerator Crisper Drawer Cover amzn.to/35mQTPr Samsung DA29-00020B Water Filter Replacement

Keep it smelling fresh and clean:

amzn.to/35ex393 ARM & HAMMER Pure Baking Soda 8 oz (Pack of 6) amzn.to/36lw1tj Clorox Disinfecting Wipes amzn.to/39s3e8m Stainless Steel Cleaner Kit

End Amazon Affiliate Links

Removal and Cleaning of the Bottom Glass Shelf on the Samsung Refrigerator with French Doors
youtu.be/08LWG7nDeok

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

Samsung Refrigerator Cleaning Tip

diy collaborative 2022-03-24 | Samsung Refrigerator Cleaning Tip

Published: 03/24/2022
Thank you for checking out our video.

In this quick video, we’ll show you how to remove the small clear plastic cover from around the water filter on your Samsung Refrigerator.

This cover can get dirty on the inside and may need occasional cleaning. Be very careful when removing the cover, especially with the small plastic clips.

Just follow my easy steps in the video and you should be okay!

Model #: RF28HMEDBSR

Amazon Affiliate Links: Be sure to check your specific model number to make sure any of these will fit.

amzn.to/36jEDAL (Clip) Samsung DA61-03166A Vegetable Cover Fixer amzn.to/2ZJbkoC Samsung RF28HMEDBSR/AA 4-Door French Door Refrigerator amzn.to/2rL9uHg Samsung DA97-08402A Refrigerator Crisper Drawer Cover amzn.to/35mQTPr Samsung DA29-00020B Water Filter Replacement

Keep it smelling fresh and clean:

amzn.to/35ex393 ARM & HAMMER Pure Baking Soda 8 oz (Pack of 6) amzn.to/36lw1tj Clorox Disinfecting Wipes amzn.to/39s3e8m Stainless Steel Cleaner Kit

End Amazon Affiliate Links

Removal and Cleaning of the Bottom Glass Shelf on the Samsung Refrigerator with French Doors
youtu.be/08LWG7nDeok

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

Samsung Refrigerator Foldable Shelf

diy collaborative 2022-03-17 | Samsung Refrigerator Foldable Shelf

Thank you for checking out our video.

In this quick video, we’ll show you how to adjust the foldable shelf in your Samsung Refrigerator

This refrigerator has several shelves and some of them can be reconfigured or changed up depending on your personal needs.

In this quick video, we’ll show you what the foldable shelf is and how to adjust it.

Model #: RF28HMEDBSR

Amazon Affiliate Links: Be sure to check your specific model number to make sure any of these will fit.

amzn.to/36jEDAL (Clip) Samsung DA61-03166A Vegetable Cover Fixer amzn.to/2ZJbkoC Samsung RF28HMEDBSR/AA 4-Door French Door Refrigerator amzn.to/2rL9uHg Samsung DA97-08402A Refrigerator Crisper Drawer Cover amzn.to/35mQTPr Samsung DA29-00020B Water Filter Replacement

Keep it smelling fresh and clean:

amzn.to/35ex393 ARM & HAMMER Pure Baking Soda 8 oz (Pack of 6) amzn.to/36lw1tj Clorox Disinfecting Wipes amzn.to/39s3e8m Stainless Steel Cleaner Kit

End Amazon Affiliate Links

Removal and Cleaning of the Bottom Glass Shelf on the Samsung Refrigerator with French Doors
youtu.be/08LWG7nDeok

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

Samsung Refrigerator Slide Shelf

diy collaborative 2022-03-10 | Samsung Refrigerator Slide Shelf
Published: 03/10/2022

Thank you for checking out our video.

In this quick video, we’ll show you how to adjust the slide-shelf in your Samsung Refrigerator

This refrigerator has several shelves and some of them can be reconfigured or changed up depending on your personal needs.

In this quick video, we’ll show you what the slide-shelf is and how to adjust it.

Model #: RF28HMEDBSR

Amazon Affiliate Links: Be sure to check your specific model number to make sure any of these will fit.

amzn.to/36jEDAL (Clip) Samsung DA61-03166A Vegetable Cover Fixer amzn.to/2ZJbkoC Samsung RF28HMEDBSR/AA 4-Door French Door Refrigerator amzn.to/2rL9uHg Samsung DA97-08402A Refrigerator Crisper Drawer Cover amzn.to/35mQTPr Samsung DA29-00020B Water Filter Replacement

Keep it smelling fresh and clean:

amzn.to/35ex393 ARM & HAMMER Pure Baking Soda 8 oz (Pack of 6) amzn.to/36lw1tj Clorox Disinfecting Wipes amzn.to/39s3e8m Stainless Steel Cleaner Kit

End Amazon Affiliate Links

Removal and Cleaning of the Bottom Glass Shelf on the Samsung Refrigerator with French Doors
youtu.be/08LWG7nDeok

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Music By - https://www.bensound.com/royalty-free...

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative
For business inquiries please contact: don@thediycollaborative.com

Noisy AC HVAC Return Vent

diy collaborative 2022-03-03 | Noisy AC HVAC Return Vent
Published: 03/03/2022

Thank you for checking out our video.

In this quick video we’ll show you how to fix a noisy HVAC return air vent.

So, what happens is due to the volume of air passing through this type vent cover it causes a vibration of the fins or louvers resulting in the noise.

In order to correct this noise, it’s necessary to adjust the fins slightly to decrease the amount of turbulence if you will from the air flowing through the vent.

It’s a very simple process and only requires slight movement on some or all of the fins. It’s not necessary to get carried away so you might make a few adjustments and then give it a try.

Another tip before starting is you might want to wrap the end of your needle nose pliers if that’s what you are using with some tap to keep from scratching the fins.

We also noticed that the vent cover needed to be turned around. When approaching the vent and looking up in this case, you can see up into the return air vent. In this case, the vent cover simply needs to be turned around. Since this one was a bit dusty, we cleaned it while we had it down and then reinstalled it.

After installation, it required a bit more TUNING to completely eliminate that annoying noise…

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative
For business inquiries please contact: don@thediycollaborative.com

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Amazon Affiliate Links:

SKIL Rechargeable 4V Cordless Screwdriver amzn.to/3uLBGIm
SKIL Rechargeable 4V Cordless Screwdriver with Bits amzn.to/3rLhHrc
DEWALT 20V Max Cordless Drill / Driver Kit amzn.to/36b5eVx
Step Ladder, 8-Feet amzn.to/3JkVxSH
SAFETY Glasses, Clear Lens amzn.to/3oL1HDD

Music By - https://www.bensound.com/royalty-free...

Garden Hose Washer Replacement

diy collaborative 2022-02-24 | Garden Hose Washer Replacement
Published: 02/24/2022

Thank you for checking out our video.

In this quick video we’ll show you how to fix those leaky garden hose connections by replacing the washer.

This is a very simple repair that anyone can do that helps you stop wasting water.

The leak typically occurs where the garden hose connects to the spigot or at the other end where you might have a hose end sprayer connected like we’re showing or perhaps a water sprinkler or maybe even another water hose.

On this end the washer would be in the nozzle or sprinkler where it connects to the hose.

The most common cause of the leak is that the washer inside the connection is worn out or damaged. In some cases, it may be completely missing. I like using washers that are bright colors like these yellows ones so I can tell at a quick glance if it’s in place or not. I also like using this style with the little tabs that help hold it in place on the threads.

The washers are very inexpensive and it’s a good idea to keep a few spares on hand and it makes sense to go ahead and replace them maybe a few times a year or for sure when you hook your outdoor hoses up after being disconnected for the winter.

I’ve put a few links in the description below for the washers.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative
For business inquiries please contact: don@thediycollaborative.com

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Amazon Affiliate Links:
Garden Hose Washers 12 Pack amzn.to/3sEEWlY
Garden Hose Washers 30 Pack amzn.to/3oMRwhV
Garden Hose Nozzle Heavy Duty amzn.to/3LuqHsr
Garden Hose Heavy Duty 50’ amzn.to/3gHwIE9
Garden Hose Washers 42 Pack amzn.to/3BgTDiW

COSTCO Pergola Build

diy collaborative 2022-02-17 | After completing the new concrete pour as part of our patio makeover, we decided we would like some sort of shade structure. We looked at a few options and decided on a kit from COSTCO. One of the things we liked about this kit is the fact that it has a retractable canopy since we didn’t necessarily always want our main patio area to be shaded.

The model we decided on is the COSTCO 12’ x 20’ Paragon Outdoor Pergola.

Assembly of the kit was a multi-day project for us since weather and other scheduling issues were vying for our time.

It is recommended to have at least three people for many of the steps which we found essential for ease of assembly.

This model arrives packaged in four boxes. Some very heavy!

Unpacking: Find the box with assembly instructions and read over the entire document before beginning.

Compare the contents of the four cartons to the full parts list. If any parts are missing a phone number is provided to call for replacements.

As you unpack the pieces it’s a good idea to lay them out in separate staging areas. Each part is labeled and can be referenced on the parts list.

Location: Select the location for the pergola. In our case, we are installing on an existing concrete patio.

Required Tools:
Tape Measure
Work Gloves
Safety Goggles
Philips Screwdriver
Level
2 small ladders
Wooden Mallet
Scissors
Liquid Soap or WD40 Lubricant
Hey Key (Included)
3/8” masonry drill bit to drill holes if installing on concrete

NOTE: Cordless screwdriver or drill with Phillips head bit and # 5/32nd Hex Driver Bit is highly recommended but not required.

See the link in the description below for the cordless driver we used.

Steps for this Build:

00:00 Begin Project
04:20 Step 1: Assembling the Corner Posts
10:17 Step 2: Attaching the Beams to the Corner Posts
27:01 Step 3: Building the Basic Frame
45:55 Step 4: Securing the Pergola to the ground
53:34 Step 5: Installing the Roof Beams
01:01:39 Step 6: Installing the Canopy

ENJOY YOUR PERGOLA!!!

We found a few damaged parts when unpacking but we were able to straighten the parts that we found that had been bent or crushed in shipping. The kit also includes a small tube of touch-up paint which comes in handy. Many of the parts were packed inside the other parts as we opened the packages.

We also used a small tray to hold all the assembly bolts, washers, etc. for ease of identification.

Since we had plenty of room, we fully assembled the pergola and then adjusted it by moving it to the desired location and then secured it to the concrete slab. Initially, we were not exactly sure of the placement on our patio and this allowed us to adjust its location slightly.

During the time that it was not anchored down yet, we used several five-gallon buckets filled with rocks and tied the pergola down at each end for safety since it was August in Texas and thunderstorms were imminent.

Thank you for checking out our video.

Be sure to check out our other videos on our patio makeover project where we remove the existing tired concrete patio and deck, pour new concrete, and refurbish an existing flower bed with surplus bricks and new galvanized raised bed planters for flowers and vegetables.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative
For business inquiries please contact: don@thediycollaborative.com

Music By - https://www.bensound.com/royalty-free...

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Amazon Affiliate Links:

SKIL Rechargeable 4V Cordless Screwdriver amzn.to/3uLBGIm
SKIL Rechargeable 4V Cordless Screwdriver with Bits amzn.to/3rLhHrc
DEWALT 20V Max Cordless Drill / Driver Kit amzn.to/36b5eVx
Step Ladder, 8-Feet amzn.to/3JkVxSH
SAFETY Glasses, Clear Lens amzn.to/3oL1HDD
Paragon Outdoor Backyard Pergola amzn.to/3GFxtIh
Masonry Drill Bit Set amzn.to/3rMxy98
Professional Knee Pads amzn.to/3stR612

#diycollaborative

Concrete Anchors

diy collaborative 2022-02-10 | Concrete Anchors – How to Install

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative

For business inquiries please contact: don@thediycollaborative.com

Music By: bensound.com/royalty-free-music

Thanks for stopping by our channel and be sure to let us know what you think in the comment section. We’d appreciate a thumbs up and would like for you to subscribe to our channel.

Published February 2, 2022

Frozen Water Faucet

diy collaborative 2022-02-02 | Prevent Frozen Water Faucet

Thanks again for stopping by our channel and be sure to let us know what you think in the comment section. We’d appreciate a thumbs and would like for you to subscribe to our channel.

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Faucet Covers:
amzn.to/3glCN9g
amzn.to/3rnLPsH
amzn.to/34bBJCg
amzn.to/3sb1aM7

Published February 2, 2022

For business inquiries please contact: don@thediycollaborative.com

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

Patio Makeover – New Concrete

diy collaborative 2022-01-30 | Published January 29, 2022

Patio Makeover – New Concrete

Patio Makeover Concrete Removal
youtu.be/5hfAg-hahic

Patio Makeover: Galvanized Planters
youtu.be/KQdJSm6O9qQ

Power Washing Patio
youtu.be/34quoTYRrXk

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative

For business inquiries please contact: don@thediycollaborative.com

Music By: bensound.com/royalty-free-music

Patio Makeover Concrete Removal

diy collaborative 2022-01-21 | Published January 20, 2022

Patio Makeover – Concrete Removal

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

Music By: bensound.com/royalty-free-music

Patio Makeover - Galvanized Planters

diy collaborative 2022-01-13 | Published January 12, 2022

Repurposing old bricks to bring new life to the patio with galvanized raised garden beds.

Amazon Affiliate Links:

● Galvanized Raised Garden Bed - amzn.to/3A6JwwV
● Galvanized Raised Garden Bed - amzn.to/3K8hrK8
● Galvanized Raised Garden Bed - amzn.to/3Khi4Bc
● Hori-Hori Weeding & Digging Knife - amzn.to/336H9y4
● Leather Work Gloves - amzn.to/3zQw5Ri
● Leather Work Boots - amzn.to/3tn222s
● Landscape Fabric - amzn.to/34MxSvq
● Compost Bin - amzn.to/33wosTZ
● Rotary Hammer Drill - amzn.to/3GmIRJO
● Organic Peat Moss - amzn.to/3rgombk
● Weber Master Touch Charcoal Grill - amzn.to/3GmNK5O

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

Music By: bensound.com/royalty-free-music

Power Washing

diy collaborative 2021-08-26 | Published August 25, 2021

In this video, we’re using the SunJoe SPX3000 electric power washer that my son purchased from the Amazon Treasure Truck to clean the brick wall and concrete patio.

His YouTube channel is KDM_Curt

Check out his video at: youtu.be/NBes1iQgZoo where he uses it to clean his 2022 GT1 KIA Stinger.

Music By: bensound.com/royalty-free-music

So after using the power washer for several hours, I have to say that I’m pretty impressed.

Be sure to check out one of our big project videos coming up where we build a 12’ x 20’ pergola on our patio space.

Amazon Affiliate Links:

SunJoe SPX 3000 Pressure Washer - amzn.to/3xkGvX7
Keen Men’s Sandal - amzn.to/3ARoTDU
Vinegar 45% Super Concentrated - amzn.to/3ANVTwK
Brush - amzn.to/3meQhrp
Bucket - amzn.to/3iW3Cmr

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative

Some of the links in this description may be affiliate links, which means I may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

Stump Grinder

diy collaborative 2021-08-17 | Published August 16, 2021

In this video we’re using the ECHO BearCat SG340 Stump Grinder to remove some old tree stumps and surface roots around our property.

Be sure to use safety gear when using equipment like this.

Eye, ear and head protection are a must at all times. It is also recommended to make sure that other people, children and pets are nowhere near to the unit when in use. While using it, we experienced small pieces of wood and rocks flying like small projectiles. So again, use caution while using this and be safe.

This unit is 23” wide and is small enough to fit through standard size gates and weighs right at 200 pounds, so it’s perfect for the homeowner. It has a horizontal cutting head which is 7” in diameter with 12 carbide cutting teeth. It has oversized pneumatic tires for ease of transport and uses gasoline.

Most of the stump grinders I’ve ever seen have a vertical cutting head so I wasn’t sure how well it would work, but overall we are very happy with the performance of the unit.

Safety Equipment:
Safety Glasses: amzn.to/3jdrzVe
Hearing Protection: amzn.to/3A98WbK
Head Protection: amzn.to/3A7A8rv
Work Gloves: amzn.to/2VsbAKS

Thanks for watching!

Please Like, Favorite and Share this video and Subscribe if you haven't done so already.

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative

Some of the links in this description may be affiliate links, which means I may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

Cleaning the Cooling Coils on your Samsung Refrigerator ~ Keep it Cold!

diy collaborative 2021-05-19 | Published on May 18, 2021

Curious why your fridge isn't cooling? Check out this how to tip on cleaning the condenser coils on your Samsung refrigerator.

When coils are dirty and clogged with dust, lint or pet hair, the refrigeration process is greatly hindered, which can prevent the appliance from cooling properly and efficiently. When dirty and left uncleaned this can cause food to spoil and cause increased electric utility bills.

Refrigerator used in this video is Samsung Model #: RF28HMEDBSR

In this how to video we show you how to clean the condenser coils on your unit to keep it cooling and in top condition.

Thanks for watching!

Please Like, Favorite and Share this video and Subscribe if you haven't done so already.

DiY Collaborative Links
Linktree: https://linktr.ee/diycollaborative

Some of the links in this description may be affiliate links, which means I may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

How To: Replace The Water Filter On Your Samsung French Door Refrigerator

diy collaborative 2020-10-12 | Published on October 12, 2020

How To: Replace The Water Filter On Your Samsung French Door Refrigerator

This video covers Samsung Model #: RF28HMEDBSR

In this how to video we show you how to replace the water filter.

Huge thanks to Curtis with KDM_Curt for collaborating on this video. Be sure to check out his videos on YouTube at: KDM_Curt

Amazon Affiliate Links:

Be sure to check your specific model number to make sure any of these will fit.

amzn.to/2ZJbkoC Samsung RF28HMEDBSR/AA 4-Door French Door Refrigerator
amzn.to/35mQTPr Samsung DA29-00020B Water Filter Replacement

Keep it smelling fresh and clean:
amzn.to/35ex393 ARM & HAMMER Pure Baking Soda 8 oz (Pack of 6)
amzn.to/36lw1tj Clorox Disinfecting Wipes
amzn.to/39s3e8m Stainless Steel Cleaner Kit

End Amazon Affiliate Links

Be sure to check out our numerous Do it Yourself videos!

Subscribe to our channel for other great DIY tips:
youtube.com/c/diycollaborative

Please Like, Favorite and Share this video and Subscribe if you haven't done so already at:
http://www.youtube.com/subscription_center?add_user=DIYadventure

Ask Me A Question
youtube.com/user/DIYadventure/discussion

More DiY Collaborative Links:

Facebook: facebook.com/thediycollaborative
Twitter: twitter.com/diycollab2015
Instagram: instagram.com/diycollaborative
Pinterest: https://www.pinterest.com.au/diycollab2015/
Tumblr: diycollaborative.tumblr.com
Website: http://thediycollaborative.com