Car Sick!!Alright, this one is a little out of order, but I get the Hobart Handler 140 all set up. A little unboxing therapy, I like new tools. Also, I look into the Hobart Handler 125 to see what exactly broke on it.
Hobart 140 Setup / Whats Wrong With The Hobart 125Car Sick!!2017-05-05 | Alright, this one is a little out of order, but I get the Hobart Handler 140 all set up. A little unboxing therapy, I like new tools. Also, I look into the Hobart Handler 125 to see what exactly broke on it.
carsick.bigcartel.comKia Soul Door Speaker ReplacementCar Sick!!2020-04-19 | I had a blow speaker in the Kia, I had an extra aftermarket speaker. Just pop it in! No big deal.
IG - @car.sick FB - @car.sick.showKia Soul Tow Hitch Install (W/ Wiring)Car Sick!!2020-04-17 | I've decided to put off buying another truck for a little longer. For now, to carry bikes, Home Depot runs, and possibly towing a jet ski, the Kia is on tow duty.
The hitch is a class 1 Curt bolt on PN: 11110 Wiring harness is a Curt plug and play PN: 56222
IG - @car.sick FB - @car.sick.showSea-Do Go KartCar Sick!!2020-04-12 | This is sooo randommmm. I was just chillin at home and dude sharks by on a mf sea-do. That's a jet ski bruh, you can't drive that thing on the street!
IG - @car.sick FB - @car.sick.show
carsick.bigcartel.comLocost Update: Dont Hate MeCar Sick!!2020-04-10 | So sad, no more Locost. It was my fault for trying to force a project, even though it is something I've wanted for a long long time. But, my family is in a better place financially and my goal is to retire early. Thanks for lending me the camera Dave! Thanks for the motivation Mr. Money Mustache!
carsick.bigcartel.comTheres Something Women Like About A Pickup MaaaanCar Sick!!2018-06-30 | I would like to introduce you to my new daily and hauler. 2003 GMC Sierra 1500 4.8 - It has about 270k miles on it right now and it still runs perfectly almost fine! I've had it for a few months now, the civic has been sold and this is its replacement. I love having a truck, I can do all the house stuff I want. When I'm ready, it will be hauling car parts!
Thanks for personally allowing the use of your song Lil Wayne and Birdman! It's nice to have connected friends!Hey Bud, Where Ya Been?Car Sick!!2018-06-23 | I'm still here! You haven't missed any build of the Locost, don't worry. I have been focusing on our recent first house purchase. It's been a nice little vacation, but I'm itching to get back to the project cars.
I took about a year off from the 1UZ 240 build as well, life happens. Thanks for being patient!Shop Organization! Cheap Shelves!Car Sick!!2017-12-01 | I got sick of looking at that mess on the west wall ever since I took down the rack to make my table. Time to do something about it!
I move some stuff around, make a huge mess, build a scrap metal/materials rack, and finally, a large shelving unit out of 2x4s.
It's hard for me to have a messy shop, I don't like working around a mess. Are you just like me and can't even with the clutter?
carsick.bigcartel.comFabrication Takes Too Long: Locost Support TubesCar Sick!!2017-11-22 | Remember that one time that I was going to mock up four tubes to start the day off and then move on to something else, but then it ended up taking all day long? I do.
This is how it goes though. You mess up one measurement, then the tube doesn't sit the way you want. Then you start over, then you go to lunch. Then you get a visitor. Then you play on your phone for a bit. Fabricator problems.
Anyway, I got my four tubes done plus two in the front that only took like 20 minutes.
Also, we have a winner on the T-shirt give away. This was fun, I will do more give aways in the future, stay tuned!
carsick.bigcartel.comLocost Miata Differential Hanging In StyleCar Sick!!2017-11-21 | This time on the awesome Locost build, I make up the tubes that the diff attaches to. Again, I used plans from Vodou that were modified Haynes and mated them to my Book chassis. I welded up the buckets, then connected them with a tube, then aligned it in the car with a jigging, then built support tubes to hold it in place. Easy peasy!
carsick.bigcartel.comMore Rear End Work! Almost done! Locost!Car Sick!!2017-11-15 | I will pick a winner for the shirt at random after a week of the video being up. That's right, look at the date on the upload and if it is more than a week after that date, then you won't be entered in the drawing! I will select a comment at random from Random.org, then you need to DM my your mailing address.
I got more of the rear done! Exclamation mark. All I need now is the differ hanger assembly and the control arm brackets, oh, and the actual control arms.
Once the diff is in and lined up, then I can drop an engine in and start mocking motor mounts. I just need an engine, small things though.
You can't have a car without rear suspension. I think I finally have a direction to go in and I'm starting to make some moves. I just wasn't really keen on using the Miata rear subframe, I think I can do better.
I take apart the subframe and start to measure. I end up using some Vodou Haynes Roadster plans. I need to modify them to fit the Book chassis, but it's a great starting point.
carsick.bigcartel.comWeld It Up! Locost FrameCar Sick!!2017-11-07 | So, since I need to scoot the chassis up on the table to start mocking up the rear end, which I need to do to mock up the engine/trans, I decided to start fully welding what I have. It took a couple hours and there is still more joints to do, but I feel like it's strong enough to start moving around. I may even put it on the ground, throw a seat in and make the mandatory vroom vroom noises.
carsick.bigcartel.comBrace Yourself: Locost Is ComingCar Sick!!2017-11-06 | The main forward shape is pretty much there. Now, I'm adding braces to help stiffen it up, things need to be stiff.
At this point, I think I need to have an engine to keep going. I need to put it where it wants to be and build the trans tunnel around it. These braces are a little more involved and are not part of the book plans, so it's more of a measure/trim/fit/trim again thing.
Intro music: michaelnapalm.bandcamp.comTop Tubes: Locost Frame BuildCar Sick!!2017-11-01 | After you tack some vertical tubes, the next logical step are top tubes!
In this installment, the top takes shape and is connected to the bottom! I do some more measuring, cutting and fitting, you wouldn't believe. Also, there is a new tool to use, a plumb bob!! Yaaaayyyy
carsick.bigcartel.comGoing Vertical: Building A Locost FrameCar Sick!!2017-10-25 | Today we get at it with frame tubes! Measuring and cutting and tacking and measuring again! It's all about the angles and the lengths.
The outline and most of the important lower frame is cut and tacked together. I did most of that yesterday, and I didn't make a video, sorrrrry. I actually had to re-cut about 5 tubes as they weren't as close to perfect on the angles that I would like.
I'm using a modified "book" chassis design, the plans I downloaded from Jim McSorley's website. http://sevenesque.com/plans
carsick.bigcartel.comKlutch/HF 4x6 Bandsaw SetupCar Sick!!2017-10-18 | I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw. I got a saw.
Shout out to Jason Chonody for getting it for me!
It didn't work right out of the box, but with some fiddling and adjusting, I got it to cut straight! So far I'm pretty happy with it, even thought it is pretty small and slightly hard to adjust for angled cuts.
carsick.bigcartel.comGet On My Level: Build Table Part 3Car Sick!!2017-10-17 | The build table is level! ish... Let's just start to build a car already.
I spent the day messing with the table, then some time figuring out the frame placement. I did manage to tack 4 whole tubes together! Progress! This this is going to take a while to build. I hope you're not in a hurry.
carsick.bigcartel.comLocost Build Table Part 2Car Sick!!2017-10-11 | Aaaaalmost done. Things always seem to take longer than you think they will. I got the MDF top on the welded up table, but it still needs to be screwed to it and have the feet leveled. I guess that will be part 3!
So, you want to build a car? Well, you better have a flat, square place to do it. Enter the build table. I was going to use a friend's chassis table, but it will take a little longer than I would like.
I check out a couple local metal places looking for some strong structural steel, but I end up having what I think is a pretty good idea to use what I already have.
To be Happy by Joey Pecoraro soundcloud.com/joeypecoraro Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music provided by Music for Creators youtu.be/sINsl5NhITsLocost Front EndCar Sick!!2017-10-04 | Today in the shop... Front end! I take the day to cut and tack together the front end assembly on the Locost. There are two tubes with two compound angles each. Not something I'd like to attempt with my chop saw. So I bring some stuff over to JTOPower! He let me use his horizontal band saw, sweet. Thanks JT!
It took a bit longer than I thought it would, so it's the only thing I accomplished in the shop today. Oh well, tough job complete!
Now, I don't have a proper build table yet, but that doesn't stop me from starting to cut the tubes. I have the measurements, I have a crappy chop saw, I have a belt sander. What else does one need?
Actually, I could use a nice horizontal band saw, or a cold cut saw, or a Evolution Rage II if anybody is willing to donate to the cause!
I'll also gladly accept a lathe and a milling machine as donation as well. Thank you for your support!
Getting the Locost metal - youtu.be/HwErgz2HAf8 Z Gone, Locost Introduction - youtu.be/BL-S68vCfJMLets get sum metalCar Sick!!2017-09-26 | Z gone. Time to get some metal. 1" square tube 16ga, weld it together and you have yourself a chassis.
Shout out to mr._mattman for stopping by to not realize who I was. Shout out to JTO Power for letting me borrow the truck again.
Intro Music By: Michael Napalm http://michaelnapalm.bandcamp.comBack In The Shop: Project UpdateCar Sick!!2017-09-20 | Well hello there. It's been a while. I've missed you. Come check out what I've been up to, including yet another new project. I swear, I have a problem.
carsick.bigcartel.com350z LED Headlights Attempt 2Car Sick!!2017-06-20 | There seems to be a pattern to the mods on my cars. I like to do things multiple times until I like the outcome. I guess that's the trouble when you want something perfect. But I don't want this car to be perfect. That's not the point.
This time I try the Auxbeam LED without the headlight housing. That little shelf bracket is NOT the way to go. Do it another way please.
Also, I think I fixed my fuel leak issue. I'll see when I go to fill it up again.
carsick.bigcartel.comLED Headlights!! 350zCar Sick!!2017-06-17 | I don't know what it is, but the headlights on this car are extremely dim. I just replaced the aftermarket HIDs with factory style halogen and I can't see a thing at night!
So I bought some cheap 4" Auxbeam LED spot lights. I had the idea of sticking them in the headlight housing. They're already all mess up anyway. Although, I do like the look of small fog style bulbs in a headlight hole, like the local drifters are doing. If this doesn't work, it may end up that way.
Also, I replaced the fuel pump o-ring with an OEM unit, straight from Nissan! Hopefully this fixes my fuel leak issue once and for all.
My impact gun has been sitting, needing repair fort like 3 years. I bought it from an old co-worker for like $20 because he couldn't find a trigger kit for it. I talked to the tool van guy and he had one to me the next week, for only about $7 too. It worked great for a while, then one day, it just felt like spinning. The anvil was just spinning on its own. So I pulled it apart and determined it needed some kind of seal. We had a couple extra guns at CMS, so it wasn't a priority to get it fixed. Now that I have my own shop, with my own shop air, and a Z with super tight lug nuts, I had to fix it. And fix it I did!
Music - To be Happy by Joey Pecoraro soundcloud.com/joeypecoraro Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music provided by Music for Creators youtu.be/sINsl5NhITs
IG - @car.sick FB - @car.sick.show
carsick.bigcartel.comNot Bride - Modified Seat Rails 350zCar Sick!!2017-06-09 | So I picked up a couple of NOTBRIDE's from my frand and I install one! Are you excited for the ass-holding increase?
They came with Buddy Club S2000 seat rails/brackets, and being the cheapo that I am, I modify them to fit my car. Most normal people would just go to the internet and order a seat bracket meant for their chassis, but not this guy!
carsick.bigcartel.comExhaust Fix #2 and Still Leaks Gas :(Car Sick!!2017-05-31 | One step forward and two steps back. I guess I have the base model so no VDC box in the center console. But then why does it say SLIP on the dash? Why does it kill my power when I try to do a burnie even with the TCS turn off? This car isn't being nice.
carsick.bigcartel.comCheap Exhaust Fix Attempt #1 - 350zCar Sick!!2017-05-28 | So I spent a couple hours cutting and welding some cheap and free metal to repair the muffler shop exhaust on the Z. The muffler that was in there was all broken on the inside and suuuuuper rattly. No can live wit dat.
I used two Lexus/Toyota resonators that I successfully used on a few other cars. I was really happy with how two resonators sounded on my 1uzfe s14, but on the vq, meehhhh. I have a friend who has an HKS exhaust, I may pick that up and forgo the cheap man's repair.
carsick.bigcartel.comMultiple ModiiCar Sick!!2017-05-27 | Time to bust out the big guns when it comes to OBD scan tools. Snap-on Modis and Modis Ultra.
I swing by Circuit Motorsports to catch up and jack in. I got to see what was actually going on with this damn VTC system. Now to just figure out what all the information means! I'm still chasing the P0021 code.
I get back to my shop to try and clean the oil passageways out. I figure, it's either not getting the correct oil pressure from the solenoid or it is sticking. The more I cleaned and blew out the passageways, the louder the actuator clicking became. Is that a good thing or a bad thing?
carsick.bigcartel.comA Scanner Dorkly - Plus Burnies!!Car Sick!!2017-05-26 | I pick up a OBDII reader because all these dang modern cars. I make a few more CELs today! I unplugged my ABS module, it will do a burn out now!
I do a couple more things to try and figure out my P code issue, you an me are probably getting sick of this. Yep, you probably want to see some actual mods and skids and such. Almost there, I have eliminated several parts of the system. I only have a few more left. Ugh, I just want to drive.
carsick.bigcartel.comMaybe The Z Is Ok!Car Sick!!2017-05-23 | It still has the P0021 code. I need to check the actuator to see if it physically moves. The oil pressure seems good, the sensors are good, the solenoids are good, I dunno. The fuel leak may be fixed soon, part has been ordered. Stupid o-ring was messed up.
I hook up a mechanical gauge to see what kind of pressure is really in the engine. The gauge seems to show everything is ok. I'm thinking the stock oil gauge just reads a little low.
Is it time to drift yet? Maybe just a little rain u-turns.
carsick.bigcartel.comMajor Problems With The 350z!Car Sick!!2017-05-22 | The more I dive into this car, the more problems I find. wth. I can't even. I need to stop fixing maintenance issues and start modifying for dorifto!
I just want to drive man. Can I hire a performance shop to build my cars? Wait, I don't want that. I just want to be able to do it full time and put some real money into it. And buy awesome tools to do it with. I need to do it all.
carsick.bigcartel.comCheap, Strong Battery Tie Down and Fixing HeadlightsCar Sick!!2017-05-21 | Everything is loose on this car. EVERYTHING.
Today is when I get the battery nice and secure. Having a loose battery will get you kicked out of an autocross or track day so fast, it'll make your head spin. Also, lets not forget about that yellow s14 where the guy's wheel fell off and the battery went flying out of the trunk. Don't be that guy.
Bottom line, you need to have your battery nice and snug. I don't know how many times I've seen a loose battery on someone's build. I hate it so much. It's kind of a pet peeve of mine.
Also, I ditch those crappy aftermarket HIDs and go back to halogen headlights. I had to do a little re-wiring, but I got it to work.
carsick.bigcartel.comP0021: I Hate YouCar Sick!!2017-05-19 | Still messing with this stupid code. It's starting to escalate now. Things are starting to get serious. I try a few more things and test some stuff. I also get ahold of the Factory Service Manual - shout out to Nicoclub!
The next step is to see what kind of oil pressure I'm getting. Since there in only one code for one bank, There may be an oiling issue behind the timing cover. That or the cam sprocket is stuck or something.
carsick.bigcartel.comBurnout Fail, Maintenance, and BobsledsCar Sick!!2017-05-18 | So I change the oil, start diagnosing the cam control problem, and attempt to do a burn out. It didn't go so well. The good news, after watching the video, I may have an LSD. It's most likely viscous, so it would need to be replaced or welded anyway, but that's pretty cool.
I need to keep doing some research and testing different parts of the cam control system, that needs to be fixed!
Thanks for watching and don't forget to subscribe!
carsick.bigcartel.com350z Daily Drift BuildCar Sick!!2017-05-13 | So it starts! I'm not planning on going crazy at first, I just want to get it registered street drivable before any mods happen. I plan on keeping it kinda street friendly for a while if I can.
I can see this thing turning into a caged race car with all the angle though. Time will tell, but first, I need to be able to open the doors from the outside!
Send: 5360 McIntosh Point #114 Sanford, FL 32773New Car Who Dis?Car Sick!!2017-05-12 | I just traded the Miata for a new car! It's a Japanese sports coupe that will soon be a drift car.
I can't wait to start sliding this thing. Stay tuned for more drift build action!
IG - @car.sick FB - @car.sick.show
carsick.bigcartel.comMiata Too Low? Adjust CoiloversCar Sick!!2017-05-12 | Did you make your Miata sit too low? I did. Now I'm going to raise it a bit. Why? Because I may trade it for something else and the other guy doesn't like it so low. Weird, I know.
carsick.bigcartel.comMiata Blower Motor Quit!!Car Sick!!2017-05-06 | Noooooooo!! Half of the reason I love this car is because it has AC! It is too dang hot in Florida in the summer to not have it. I mean, this car is totally not cool enough to be hot aaaand slow.
It totally stopped blowing last week, but over several months, every once in a while, it wouldn't come on unless I bumped the speed up to 3 or 4. That tells me that the motor is starting to fail. If maybe it worked all the time but only 2 speeds, then maybe I would lean more to the resister pack.
So I tear it apart and check it out even though it started working on its own today. I may need to order a new motor soon!
carsick.bigcartel.comLocal Hero Wins FD Orlando Pro 2 - Kevin Lawrence 2017Car Sick!!2017-05-04 | I get a chance to make it out to Formula Drift Orlando, because well, I live in Orlando. Thanks for the ticket Alex!! I only made it out to the Pro 2 comp on friday, which I prefer, less crowds.
Congratulations to Kevin Lawrence for the much-deserved win! It must feel great to conquer his home track with all his friends and family there!
Let me know in the comments if you went and how you enjoyed it!
Don't forget to check out my insta and fb as well!
carsick.bigcartel.comS15 Chassis DollyCar Sick!!2017-05-02 | Well, I've been trying to upload a video for a week but keep having problems. In it I set up the Hobart Handler 140 and compare it to the Handler 125. This is the video right after that. So, I'll keep trying to upload it or compress it and it will be like Benjamin Button where you watch backward.
In this video, KSV Looms and JTo Power are starting the s15 drag car build. I help them weld a bolt-on chassis dolly with nice casters so they can wheel it between both their shops easily.
I also get some storage cases for organizing some shop supplies!
Thanks for watching and don't forget to order a cool shirt or decal!
carsick.bigcartel.comMiata Meet MondayCar Sick!!2017-04-25 | Miatas Miatas Miatas everywhere. I missed out on Miatapalooza last week, but this is pretty close. Orlando Roadsters FB Group meet. NAs, NBs, NCs and NDs, we got 'em all! There was even one with and LS1 in it. LS swap the world!
carsick.bigcartel.comA Zip Tie BouquetCar Sick!!2017-04-23 | I want to start getting into the Sortimo style organizer cases like Adam Savage. In the meantime, this $10 PVC zip tie organizer will have to do!
Also, we get to blow up an airbag! This one is from KSV Looms super secret S15 project car, oops, I guess it waaaas a secret.
carsick.bigcartel.comEverything Gets WheelsCar Sick!!2017-04-22 | Center cabinets slash workbenches getting in your way? Add some casters. I got these from Norther Tool and they seem to be pretty good quality.
I know some of you are waiting on some car projects, maybe getting a little tired of the shop stuff. I'm on the hunt for the right car still. I have been looking for a couple months now. Soon.
carsick.bigcartel.comHeadliner TroublesCar Sick!!2017-04-15 | Well, the first attempt didn't work. Maybe the next one will. We'll see. Do you ever think that you're wasting your time? Maybe I should have just bought a new liner from Honda. I have a problem with spending money though, I would much rather try to do something myself than spend money to have it done or buy a new one. Sometimes that bites you in the butt, and this may be one of those times.
Also, we take a trip to Mama's Sauce Print Shop to see Chonody and we get to see a couple of their cool ass printing machines.
carsick.bigcartel.comTape CaddyCar Sick!!2017-04-12 | Bro, do you even tape? I know this is the video everybody's been waiting for! I make a holder for my tape rolls!!! Also, I fix a flat tire, also, I use the whiteboard, also, hells yeah Lisa, hells yeah Stacey.
Shop stuff! I love working in the shop and can't wait to get back on there on the weekend.
Also, my wife (who's voice was altered for her protection) tells us how she really feels about my videos!
carsick.bigcartel.com1972 Chevelle MalibuCar Sick!!2017-04-11 | Chonody brings in his girl's dad's Chevelle Malibu. Classic muscle car on the low key. This thing has been trough a lot, and we start getting into some wiring to fix some issues. It's also for sale!
This is the first car project day in the new shop! Woo hoo!
There are a few other things I did this project day, but those well be another video, too much footage for one.
IG - @car.sick FB - @car.sick.show
carsick.bigcartel.comShop Air!Car Sick!!2017-04-04 | The air lines are all hooked up! What kind of shop doesn't have a compressor? It took many trips to Lowes, but I got all the things I need, now I can blow things and fill tires!
I install a Klutch hose reel, from Northern Tool, onto a piece of plywood that I attach to the drywall with Toggler anchors. The knee bone's connected to the thigh bone.