3D Printing Lowpoly Bulbasaur on the Ultimaker 2 Multimaker 2026-09-19 | 3D Printing Lowpoly Bulbasaur on the Ultimaker 2
3D Printing MPCNC Multimaker 2019-07-27 | I 3D Print the MPCNC 25mm on my Ultimaker 2 (+), extremely fun project!So much fun getting into CNC milling, and building the machine itself was very enjoyable!thingiverse.com/thing:790533Go to v1engineering.com for more info on the MPCNC and you can order a kit with everything you need to build your own! I did and only needed to buy some steel tubing and a makita router both I sourced locally and i was done!I used Colorfabb filament, some pla/pha and some ngen.Music by Audiosprite and Familyjulesx7This is my first video in a long time and it will be my last, if you want to see what I'm up to follow me on Instagram!instagram.com/multimaker_cncI will be making lots of cool stuff on my new MPCNC and I'll still be 3D printing lots of cools stuff :-)
3D Printing Prehistoric Shark Tooth Multimaker 2015-12-20 | Printing a tooth from the prehistoric shark known as Megalodon on my Ultimaker 2!Filament : White XT by ColorFabbModel name: Giant Prehistoric Shark Tooth!Thingiverse: http://www.thingiverse.com/thing:561270.25mm Nozzle,Printed at scale, layer height 0.1 mm, 50 mm/s,10% infill,250c on nozzle,70c on the bed,fan at 100%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)I printed this with my smallest nozzle to get the most detail but i'm sure that was completely unnecessary as a 0.4 nozzle would be more than good enough. But the tooth turned out great! Looks awesome! I'm glad the Megalodon is extinct as it was a monster of great proportion!Follow me on twitter @Multimaker3DE-mail me at Multimaker@nenett.noAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Darth Vader Bust Multimaker 2015-12-06 | Printing a bust of Darth Vader on my Ultimaker 2!Filament : Black XT by ColorFabbModel name: Darth Vader BustThingiverse: http://www.thingiverse.com/thing:2485100.4mm Nozzle,Printed at x3.67 scale, layer height 0.1 mm, 50 mm/s,10% infill,240-250c on nozzle,70c on the bed,fan at 100%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)The awesome Darth Vader 3d printed.Turned out OK not great, the helmet came loose on one side and got some scars on the other side. Also when scaling up this much the model is a smidge to low res.Follow me on twitter @Multimaker3DE-mail me at Multimaker@nenett.noAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Batarang Multimaker 2015-11-29 | Printing a Batarang on my Ultimaker 2!Filament : Black XT by ColorFabbModel name: Batarang_enhancedThingiverse: http://www.thingiverse.com/thing:5484180.4mm Nozzle,Printed at x2.21 scale, layer height 0.1 mm, 50 mm/s,10% infill,240c on nozzle,70c on the bed,fan at 100%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)My first real weapon print ;-p it's actually kinda sharp but would struggle to incapacitate any of my enemies with it ;-)Follow me on twitter @Multimaker3DE-mail me at Multimaker@nenett.noAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Chinese Folding Fan Multimaker 2015-10-23 | Printing a pre-assembled Chinese folding fan on my Ultimaker 2!Filament : Black XT and Ultra Marine Blue PLA by ColorFabbModel name: 3D Printed Chinese Oriental Folding Fan (No Assembly Required)Thingiverse: http://www.thingiverse.com/thing:6737410.5 and 0.25mm Nozzle,Printed at scale, layer height 0.1 mm, 50 mm/s,10% infill,240c on nozzle, 210c for PLA, 70c on the bed, 50c for PLA,fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Pretty cool model actually, the fan prints in one piece and I just had to break the blades loose from the axle and voila fully functional hand fan :-) Follow me on twitter @Multimaker3DE-mail me at Multimaker@nenett.noAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
PiGrrl Review Multimaker 2015-10-18 | I make and review the PiGrrl from Adafruit!Table of contentReview - 08:35Gameplay - 12:48Conclusion - 29:51learn.adafruit.com/pigrrl-raspberry-pi-gameboy/overviewSorry i don't remember my printer settings, I made this in june and didn't write it down.If you liked my review please leave a comment :-)Music by Audio Sprite (mostly)Find him on SoundcloudFollow me on twitter @Multimaker3DE-mail me at Multimaker@nenett.noAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing John Deere Logo sign Multimaker 2015-10-14 | Printing a John Deere logo desktop stand on my Ultimaker 2!Filament : Black and White XT by ColorFabbModel of my own design0.5 and 0.25mm Nozzle,Printed at scale, layer height 0.2 mm, 50 mm/s,10% infill,240c on nozzle, 70c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Made this as an exercise for myself in Fusion 360. Gave it away as a gift for my brother and his son.Follow me on twitter @Multimaker3DE-mail me at Multimaker@nenett.noAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Toy Story Alien Multimaker 2015-10-13 | Printing the Alien toy from Toy Story on my Ultimaker 2!Filament : XT GreenModel : Toy Story Alien by Nik ShavorichMyMiniFactory: myminifactory.com/object/toy-story-alien-58970.5mm Nozzle,Printed at scale, layer height 0.1 mm, 50 mm/s,10% infill,240c on nozzle, 70c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Cool little model, love the movies and the kids like it :-)The antenna got way to hot unfortunately and melted a little...Follow me on twitter @Multimaker3DE-mail me at Multimaker@nenett.noAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
Channel Trailer, Video Compilation Multimaker 2015-10-02 | A quick sampler of some of my many 3D Printing videos!Subscribe for loads of 3D printing goodness!LASER content coming next year! With the Glowforge!Support the channel by buying a Glowforge with this link!http://glowforge.com/referred/?kid=LHJXMh
3D Printing Lancer from Gears of War! Multimaker 2015-08-21 | Printing the AWESOME Lancer from Gears of War on my Ultimaker 2!Filament : XT WhiteModel : Gears Of War Lancer- CHAINSAW GUN!MyMiniFactory: myminifactory.com/object/gears-of-war-lancer-chainsaw-gun-11478Music by various soundcloud users0.4mm Nozzle,Printed at scale, layer height 0.1 - 0.2 mm, 50 mm/s,15% infill,240-250c on nozzle, 70c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)My most epic print yet! Totally awesome gun from the awesome game Gears of War for Xbox 360 and ONE! Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Platform Jack! Multimaker 2015-07-26 | Printing a cool Platform Jack in ONE PIECE on my Ultimaker 2!Filament : Warm Red by colorFabbModel : Platform Jack by Intentional3DThingiverse: http://www.thingiverse.com/thing:925556Music by FamilyJules7xwww.familyjules7x.com0.4mm Nozzle,Printed at scale, layer height 0.1 mm, 50 mm/s,20% infill,210c on nozzle, 60c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Awesome model, prints in one piece with no support and it works!I just had to break loose all the joints as they had fused together a little.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a Knitted Vase! Multimaker 2015-07-17 | Printing a nice vase for the missus on my Ultimaker 2!Filament : Pale Gold by colorFabbModel : Knitted vase by ColorFabbThingiverse: http://www.thingiverse.com/thing:180267Music by AudioSpritewww.Soundcloud.com/AudioSprite870.8mm Nozzle,Printed at 22.35x scale, layer height 0.2 mm, 70 mm/s,0% infill,220c on nozzle, 60c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Nice vase, printed fine, love the color.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a Dragon Box Multimaker 2015-07-16 | Printing a wooden box with a dragon on top on my Ultimaker 2!Filament : Bamboofill by colorFabbModel : Hollow Dragon Box by ModernGnomeThingiverse: http://www.thingiverse.com/thing:916125Music by AudioSpritewww.Soundcloud.com/AudioSprite870.8mm Nozzle,Printed at scale, layer height 0.1 mm, 70 - 90 mm/s,20% infill,210 - 220c on nozzle, 60c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Real cool looking model! Came out a real mess as vel, this was my secong print with bamboofill and clearly need to make some adjustments! But with a bit of cleaning it turned out ok! Didn't use support material but definitely should have!Lucked out though nothing really bad happened :-)Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Pistol from Fallout 4! Multimaker 2015-07-13 | Printing a pistol from Fallout 4 on my Ultimaker 2!Filament : Shining Silver and bamboofill by colorFabbModel : Fallout 4 - 10mm Pistol by lilykillThingiverse: http://www.thingiverse.com/thing:905534Music by AudioSpritewww.Soundcloud.com/AudioSprite870.4mm Nozzle 0.8mm on bamboo fill,Printed at scale, layer height 0.1 mm, 50 mm/s, 70 mm/s on bamboo fill 20% infill,220c on nozzle, 215c on bamboo fill60c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Really like the model, looks awesome.Had to use glue to assemble it.The bamboo fill came out a little rough but i kinda like the look.Fallout being one of the best game series around this was a fun print for me! Can't wait for four to come out!!!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Origamix Rabbit Multimaker 2015-06-08 | Printing an Origami Rabbit on my Ultimaker 2!Filament : Ultra Marine Blue by colorFabbModel : Origamix_Rabbit by MiriceThingiverse: http://www.thingiverse.com/thing:600429Music by FamilyJules7xFamilyJules7x.com0.25mm Nozzle,Printed at scale, layer height 0.1 mm, 50 mm/s, 15% infill,220c on nozzle,60c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Awesome model, really looks like origami! Once again i wanted to test my 0.25mm nozzle and in this case i wanted to see if it would give nice sharp edges and points. And i must say it really did! Really sharp and nice!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Aztec Chief Multimaker 2015-06-07 | Printing an Aztec Chief on my Ultimaker 2!Filament : Ultra Marine Blue by colorFabbModel : Aztec Chief by MakerBotThingiverse: http://www.thingiverse.com/thing:205869Music by FamilyJules7xFamilyJules7x.com0.25mm Nozzle,Printed at scale, layer height 0.1 mm, 50 mm/s, 15% infill,220c on nozzle,60c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Cool little dude! Came out great! Wanted to get the max out of the detail in the model hence why i used the 0.25mm nozzle.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing OZO Puzzle Multimaker 2015-05-27 | Printing The Bear Puzzle OZO on my Ultimaker 2!Filament : XT White by colorFabbModel : Ozo 1x2x3 Puzzle Bear by emancarrilloThingiverse: http://www.thingiverse.com/thing:697635Music by FamilyJules7xFamilyJules7x.com0.4mm Nozzle,Printed at scale, layer height 0.1 mm, 50 mm/s, 15% infill,250c on nozzle,70c on the bed, fan at 50%.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Cool little puzzle! Fit together well just needed to remove some buggers and sand it ever so slightly, could probably have sanded a little more to make it easier to twist.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing The Olsson Box Multimaker 2015-05-25 | Printing a box for my nozzles and tools on my Ultimaker 2!Filament : WoodFill by colorFabbModel : Olsen block box by TelliriaYouMagine: youmagine.com/designs/olsen-block-boxMusic by FamilyJules7xFamilyJules7x.comUsed 0.8mm Nozzle,Printed at scale, layer height 0.1 mm, 70 mm/s, 20% infill,210c on nozzle,60c on the bed, fan at 50% ramping up from 0,5mm up(had to decrease fan speedwith the new fan shroud or else i get heater errors).As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Came out OK, the holes for the nozzles were a little tight but easy enough to file bigger. The lid had some printing issues don't really know what happened there but i think i can sand it some more and get it OK.Printing woodfill with the 0.8 nozzle was great! No jams and it just worked! Had lots of jams with the standard 0.4 nozzle.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing The Lemonator! Multimaker 2015-05-24 | Printing The Lemonator on my Ultimaker 2!Filament : Signal Yellow by colorFabbModel : Lemonator! 3D printed juice squeezer of awesomeness by kondzio29Instructibles: http://www.instructables.com/id/Lemonator-3D-printed-juice-squeezer-of-awesomeness/#step1Music by FamilyJules7xFamilyJules7x.comPrinted at scale, I used a 0.8 mm nozzle,0.2mm layer height,1.6mm shell,1mm bottom/top,20% infill,70mm/s.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Printed fine, some weird “dents” on one side have never quite seen anything like it, but i did print very fast with my big nozzle.One big issue for me is i have no bottles that fit! Only a juice carton which is not ideal. But it does work and is a really cool concept!If you like this model visit the link above and vote it up!Mr. Szmit is a really nice guy so give him some love!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a Question Block Multimaker 2015-05-22 | Printing a Question Cube from Super Mario on my Ultimaker 2!Filament : Signal Yellow by colorFabbModel : Hollow question block by DaidYouMagine: youmagine.com/designs/hollow-question-blockMusic by FamilyJules7xFamilyJules7x.comPrinted at 2x scale, layer height 0.1 mm, 50 mm/s, 6% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Printed almost 100% perfectly! Looks super clean and sharp!Only issue is some scars on the top.Very easy to print.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Fan Shroud for the Ultimaker 2! Multimaker 2015-05-17 | I 3D Print and mount a new fan shroud for my Ultimaker 2!Filament : Shining Silver by colorFabbModel : UM2 Dual Fan Shroud by LabernYouMagine: youmagine.com/designs/um2-dual-fan-shroud#!commentsMusic by Audio Spritewww.soundcloud.com/AudioSprite87Printed at scale, layer height 0.1 mm, 50 mm/s, 100% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Works pretty good! But it melts :-( I need to insulate it better and maybe print it in ABS or XT instead! Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
Installing and testing The Olsson Block! Multimaker 2015-05-10 | I am upgrading my Ultimaker 2 with the Olsson Block kit!Now i can change nozzles in 1 min and try out different nozzle sizes and types.The Ultimaker robot i used for testing was maybe not the best model for comparison but you live and learn.I also experienced some issues with the original fan shroud with this kit but i have printed a new one and there will be a video coming soon.Music : Title, MM2 and Mega Man Title Theme Medley by MegaRockTorque wrench model on YouMagine.
Maintaining the heated buildplate on 3D Printers! Multimaker 2015-05-01 | This is how i clean and apply adhesives on my Ultimaker 2 buildplate!I almost never have problems with prints detaching while printing.Clynol styling spray, ultra strong hold!Hope this simple guide can help you get great adhesion on your own heated glass buildplates!
3D Printing a Wrench on the Ultimaker 2 Multimaker 2015-05-01 | Printing a fully assembled adjustable wrench on my Ultimaker 2.Filament : Shining Silver by colorFabbModel : Fully assembled 3D printable wrench by barspinThingiverse: http://www.thingiverse.com/thing:139268Music by Audio Spritewww.soundcloud.com/AudioSprite87Printed at 1.6x scale, layer height 0.1 mm, 50 mm/s, 50% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)A cool print, requires some cleanup to make it work but nothing major. It does work i haven't tested it on a actual bolt or nut. It does have a little too much give in it to be very useful i think. It would have been awesome to print this completely solid with a carbon fiber filament then maybe it would actually work on some not too tight nuts!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a T800 skull on the Ultimaker 2 Multimaker 2015-04-27 | Printing the skull of a T800 Terminator on my Ultimaker 2.Filament : Shining Silver by colorFabbModel : T-800 Redux (sliceable) by ToScHThingiverse: http://www.thingiverse.com/thing:288467Music by FamilyJules7xFamilyJules7x.comPrinted at 1.36x scale, layer height 0.1 mm, 50 mm/s, 0% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Awesome piece but it did print with a few issues, definitely should have used support material.The print took over 40 hours so i won't be reprinting any time soon...Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Mjolnir on the Ultimaker 2 Multimaker 2015-04-22 | Printing Thor's hammer "Mjolnir" on my Ultimaker 2.Filament:Chocolate Brown and Shining Silver by colorFabbModel : Thor's Hammer by SkimbalThingiverse : http://www.thingiverse.com/thing:17637Music by Audio SpritePrinted at scale, layer height 0.1 mm, 50 mm/s, 6% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Cool model, should have printed it bigger... and heavier!The tolerances between the hammer and handel were very tight!and since i printed the handle with low infill one of the two tabs broke.I have been messing around with some different editing software so let me know what you like about the videos and what you don't!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Stegosaurus Foot on the Ultimaker 2 Multimaker 2015-04-18 | Printing the foot and footprint of a Stegosaurus on my Ultimaker 2.Filament:Chocolate Brown,XT White and Intense Green by colorFabbModel : Stegosaurus Footprint by CurriculumThingiverse : http://www.thingiverse.com/thing:601433Music by Audio SpritePrinted at 1.85x scale, layer height 0.1 - 0.15 mm, 50 mm/s, 6% infill,220c-250c on nozzle,60c-70c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Unfortunately i lost the timelapse for the mud base, i really would have liked seeing that...Turned out a lot cooler than i thought! I really like the contrast in the colors.I have been messing around with some different editing software so let me know what you like about the videos and what you don't!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a Bear pot on my Ultimaker 2 Multimaker 2015-04-17 | Printing a reservoir pot with a bear on my Ultimaker 2.Filament : Chocolate Brown by colorFabb (PLA/PHA)Model : Reservoir pot with a bear by madarakisThingiverse : http://www.thingiverse.com/thing:344966Music by Audio SpritePrinted at scale, layer height 0.1 mm, 50 mm/s, 20% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Really cute flower pot! I love the bear!It's also practical! Probably... I don't know....But the bear is really CUTE!I have been messing around with some different editing software so let me know what you like about the videos and what you don't!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a Sabre Toothed Cat skull on the Ultimaker 2! Multimaker 2015-04-16 | Printing a Sabre-Toothed Cat skull on my Ultimaker 2.Filament : XT White, Bronzefill and Woodfill fine by colorFabbModel : Saber-Toothed Cat Skull by CurriculumThingiverse : http://www.thingiverse.com/thing:472463Music by CapcomPrinted at 1.68x scale, layer height various, 50-70 mm/s, various% infill,210-250c on nozzle,50-70c on the bed, fan at 100% from 0,5mm up,Sorry i don't have more specifics.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Cool model, looks awesome printed without issue except for the woodfill problems.Woodfill is very hard to get started with! Speed Speed Speed!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a Female Torso on the Ultimaker 2 Multimaker 2015-04-11 | Printing a Sculpture of a Female Torso on my Ultimaker 2 with Bronzefill.Filament : Bronzefill by colorFabbModel : Woman Torso Sculpt **Nudity** by MeoWorksThingiverse : http://www.thingiverse.com/thing:151251Music : Twinrova by FamilyJules7x www.familyjules7x.comPrinted at scale, layer height 0.2 mm, 50 mm/s, 6% infill,220c on nozzle,50c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)BUT be VERY CAREFUL with adhesives when printing with colorFabb BronzeFill!!! That filament sticks to the buildplate like a mother******!Printed very nicely! Thank god for perky breasts no overhangs! ;-)Beautiful model! I have been messing around with some different editing software so let me know what you like about the videos and what you don't!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a GoPro Holder on the Ultimaker 2 Multimaker 2015-04-11 | Printing a holder for my GoPro Hero 3+ Black ed. on my Ultimaker 2.Filament : Ultra Marine Blue by colorFabb (PLA/PHA)Model : GoPro Holder by MicrosoftStoreThingiverse : http://www.thingiverse.com/thing:468417Music : Super Mario World by FamilyJules7x www.familyjules7x.comPrinted at scale, layer height 0.1 mm, 50 mm/s, 100% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Printed beautifully, cool little holder. Works as you would expect, holds the gopro at most angles you set it to but not very tightly.This will make it easier for me to film myself, up till now i have just satt the gopro on top of the printer :-p I have been messing around with some different editing software so let me know what you like about the videos and what you don't!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
Modeling and 3D Printing a Lunch Box on the Ultimaker 2! Multimaker 2015-04-09 | I design my own lunch box and 3D print it!Filament : Ultra Marine Blue by colorFabbModel : Own designMusic by Familyjules7xwww.familyjules7x.comPrinted at scale, layer height 0.2 mm, 80 mm/s, 12% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Let me be the first to say, I can't 3D model!This is not a how to!But something as easy as a box i can manage ;-)It has room for 2 apples and some bread, which is what i usually eat at work everyday.The lid fits perfectly but that also makes it hard to take on and off.I will probably give this another go when i develop some better skills!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing The Nude Panther on the Ultimaker 2! Multimaker 2015-04-03 | Printing the Nude Panther Sculpture on my Ultimaker 2.Filament : BronzeFill by colorFabbModel : Nude Panther V2 by FantasygraphDownload Link: http://www.makershop.co/shop/fantasygraph/item/nude-panther-v2Music by Audio Spritewww.soundcloud.com/AudioSprite87Printed at 1.75x scale, layer height 0.2 mm, 50 mm/s, 6% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Awesome model, easy to print!As you could see in the video wet sanding was not a good idè!I used 120, 240 and 400 grit paper but its impossible to get into every nook and cranny so i would advise you use a rock tumbler or something which should polish more evenly even in hard to reach places!I don't know if i could fix my print with some polishing products but i will try, follow me on twitter to see if i do.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
Modding the Logitech Speaker Stand for iPad! Multimaker 2015-04-02 | I was really unhappy about the way my stand worked, the angle it could hold the iPad was terrible.Music by Hyde - Free Instrumentals and YouTubeFollow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
Rock Blasting February 2015 Multimaker 2015-03-28 | Just some rock blasting footage i took during my day job.I think there was something like 17 metric tons of explosives going off here, and 55000 tons of rock coming loose.If you like 3D Printing you should check out my other videos andfollow me on twitter @Multimaker3D
3D Printing PhLAsk on the Ultimaker 2 Multimaker 2015-03-27 | Printing a flask on my Ultimaker 2.Filament : XT White by colorFabbModel : PhLAsk by ErikJDurwoodIIThingiverse : http://www.thingiverse.com/thing:55628Music : Wicked Child Castlevania by FamilyJules7x familyjules7x.comPrinted at scale, layer height 0.15 mm, 50 mm/s, 100% infill,250c on nozzle,70c on the bed, fan at 100% from 0,5mm up,lots of shells.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Cool flask, seemed to work pretty vel. The cap did leak when i pressed on the flask but i didn't have any extra seal in there.Unfortunately i pressed too hard while testing :-( Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a Companion Cube on the Ultimaker 2! Multimaker 2015-03-26 | Printing a Companion Cube from Portal on my Ultimaker 2.Filament : XT White by colorFabbModel : Companion Cube Upgrade by LandruThingiverse : http://www.thingiverse.com/thing:13588Music : Want You Gone Portal 2 Guitar Cover by FamilyJules7x www.familyjules7x.comPrinted at 100mm x 100mm x 100mm scale, layer height 0.15 mm, 50 mm/s, 6% infill,250c on nozzle,70c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Awesome model, looks great! Easy to print.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing THE Birdhouse on the Ultimaker 2! Multimaker 2015-03-23 | Printing the American Craftsman Bungalow Birdhouse on my Ultimaker 2.Filament : XT White by colorFabbModel : American Craftsman Bungalow Birdhouse by ErikJDurwoodIIThingiverse : http://www.thingiverse.com/thing:117080Music : Age Of Empires II : Age Of Kings Remixed! by Audio SpritePrinted at scale, layer height 0.15 mm, 50 mm/s, 20% infill,250c on nozzle,70c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Amazing model! Extremely detailed!Printed without issue, very very vel modeled for 3D printing!Minimal overhangs, printed SO SO nice!! I wish i had watched it more during printing so i could see how the overhangs printed because they look amazing!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing a Human Skull on the Ultimaker 2! Multimaker 2015-03-15 | Printing a human skull on my Ultimaker 2.Filament : XT White by colorFabbModel : Human Skull by CurriculumThingiverse : http://www.thingiverse.com/thing:622390Music : Castlevania II - Bloody Tears Remixed! by Audio SpritePrinted at 2,33x scale, layer height 0.15 mm, 50 mm/s, 20% infill on jaw, 6% infill on the rest,250c on nozzle,70c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Cool model, educational!I scaled it up to the max of my printer but in retrospect that was probably a little too big, now it's larger than a average sized male skull. I had a lot of issues printing the jaw, it is meant to be printed with the corners down but that way i couldn't get good enough adhesion so i removed the pins which are also in the file and layed it as flat as i could and cut of a little bit of the bottom and that turned out really good actually! I unfortunately got a little bit warping between the skull pieces so the seam is not the prettiest! Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
Making the Ultimate Nintendo Controller Adapter for PC! Multimaker 2015-03-14 | I make the ultimate Nintendo controller adapter for PC!Filament : XT Black by colorFabbModel : Own designMusic : Pokémon - Red Blue Opening Theme (RAC Blue Satellite Mix) by RAC - Megaman : Elecman Remix by Audio Sprite - Megaman III : Top Man's Beat Down! by Audio Sprite Printed at scale, layer height 0.15 mm, 50 mm/s, 20% infill,250c on nozzle,70c on the bed, fan at 100% from 0,5mm up,with supports.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)This was a project i started because i wanted to see if i could, and to use my 3D Printer for something other than usual.The results are very very indicative of my impatience and lack of electrical skill and modeling skill.What i did was buy PC adapters for NES, SNES, N64 and GameCube on amazon and a 7 port USB hub (for wii controller compatibility just add a bluetooth dongle as there is a free port available. I have it built in on my PC). Then i modeled an enclosure with openings that fit the controller ports and USB.Printed that out with mixed results, my bottoms did not come out looking very good but thankfully the two halves didn't warp and fit nicely together! There are a lot of improvements i would like to do with the enclosure like a good way to fasten it together, and better mountings for the controller boards and ports.Since i didn't have the know-how to make real mounts for the adapters i ended up hot-gluing EVERYTHING in place which makes disassembly a bitch :-/ Some of the adapters would have benefitted from being disassembled and re-soldered as to get a good proper fit but again i didn't trust my soldering skills.Another way the design could have been shrunk and cleaned up by a LOT would be if i would have soldered the USB's from the adapters directly onto the USB hub as the connectors take up an insane amount of space! But this was also way over my head.Now on a positive note i am really happy i attempted this because even though it didn't turn out very pretty it does work! I now have ONE box that can interface with every Nintendo controller ever made(excl Wii U)! And thats cool, i'm sure i could get made some cool graphics to decorate the outside of the box as vel.I hope to revisit this project in the future with a much improved enclosure model and a better handle on soldering ;-)Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing The Jaw of a Great White Shark! Multimaker 2015-03-05 | Printing the jaw from Jaws on my Ultimaker 2.Filament : XT White by colorFabbModel : Great White Skull by MakerBotThingiverse : http://www.thingiverse.com/thing:128112Music : Acoustic/Pop/Rock/Alternative - Acoustically driven instrumental by: Hyde - Free InstrumentalsPrinted at 1,29x scale, layer height 0.15 mm, 50 mm/s, 6% infill,250c on nozzle,70c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Amazing model! Extremely cool at least when printed this big!Printed without issue, but when using as little as 6% infill the pins get very brittle and after finishing the first piece i tried the pins and broke them both! But i later realised the pins are keyed to only go in two ways, and when i did that correctly they held up. And thankfully you get a couple of pins extra! The model also includes a top portion the "hat" but i really liked the look of just the jaw, that may be where those extra pins go.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing His and Her Owls on the Ultimaker 2 Multimaker 2015-03-03 | Printing His and Her Owls on my Ultimaker 2.Filament : XT White by colorFabbModel : His and Her Owls by ErikJDurwoodIIThingiverse : http://www.thingiverse.com/thing:18879Music : Acoustic, Alternative, Folk, Rock Instrumental - Mumford & Sons Inspired by: Hyde - Free InstrumentalsPrinted at 2,04x scale, layer height 0.15 mm, 40 mm/s, 20% infill,250c on nozzle,70c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Cool model, looks amazing! Fairly easy to print.I probably used way too much infill, this was a model i sliced a long time ago and when another white print kept failing i got irritated and gave up and instead printed this ;-) 6% infill would probably be enough.This print took a LONG time, like 40 hours! Would have been much quicker with less infill and i could have increased the speed a tad.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Batman bust on the Ultimaker 2! Multimaker 2015-02-21 | Printing a bust of Batman on my Ultimaker 2.Filament : XT Black by colorFabbModel : Batman Bust by MustangDaveThingiverse : http://www.thingiverse.com/thing:241899Music : Outrun! - Southern Rain Remix by Audio SpritePrinted at 2,41x scale, layer height 0.15 mm, 50 mm/s, 6% infill,250c on nozzle,70c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Awesome model, looks amazing! Fairly easy to print.Unfortunately one shoulder came loose during the print, i should have used more hairspray! But in the environment i have the model displayed it doesn't really matter, but still arg...Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Maltese Falcon on the Ultimaker 2 Multimaker 2015-02-19 | Printing a Maltese Falcon on my Ultimaker 2.Filament : XT Black by colorFabbModel : Maltese Falcon (with support) by ToScHThingiverse : http://www.thingiverse.com/thing:290953Music : Star Fox 64/Lylat Wars : Victorious Remix! by Audio SpritePrinted at 1,4x scale, layer height 0.15 mm, 50 mm/s, 3% infill,250c on nozzle,70c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Awesome model! Really cool looking! Pretty easy to print too.The filament was a bit to shiny for my taste for this model but no biggie.Be sure to get the model with supports for the tail feathers, works great!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment! Reach out on twitter for a faster response.
3D Printing Superman Pendant in colorFabb Bronzefill! Multimaker 2015-02-14 | Printing a Superman Logo Pendant on my Ultimaker 2 and I experiment with polishing it.Filament : Bronzefill by colorFabbModel : Superman Logo Pendant by ashleywebsterYouMagine : youmagine.com/designs/superman-logo-pendantMusic : Title, MM2 and Mega Man Title Theme Medley by MegaRockPrinted at scale, layer height 0.2 mm, 50 mm/s, 100% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)But beware!!! Do NOT use much hairspray with this filament! Maybe not at all(on heated bed)! It stuck to my build plate like hell!!On the plus side there's no way this will ever come loose during a print ;-)My first attempt with Bronzefill, and i am satisfied.It feels great! Very heavy and has a real hi-quality feel.Using a Dremel to polish this material is not recommended! Even at the slowest speed with a very soft tool it digs down and creates an ugly surface! The green stuff helped but not enough, i don't know if it's even for that... I haven't tried any bronze polishing products yet. Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Elsa tiara from the Disney Film Multimaker 2015-02-10 | Printing Elsa's tiara from the Disney animated movie Frozen on my Ultimaker 2.Filament : Sky Blue by colorFabbModel : Elsa's tiara remixed by mutraxYouMagine : youmagine.com/designs/elsa-s-tiara-remixedMusic : Megaman III - Top Man's Beat Down! by Audio SpritePrinted at scale, layer height 0.1 mm, 50 mm/s, 35% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)I printed this for my daughter and her friend and they loved them but they thought it was a little tight on the head, they are 6 years old. But it printed very nicely with no issues!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing an Elephant on the Ultimaker 2 Multimaker 2015-02-03 | Printing an Elephant on my Ultimaker 2.Filament : Sky Blue by colorFabbModel : Elephant by LeFabShopThingiverse : http://www.thingiverse.com/thing:257911Music : Star Fox 64/Lylat Wars : Victorious Remix! by Audio SpritePrinted at 0,84x scale of the big version, layer height 0.1 mm, 50 mm/s, 3% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Cool model, turned out a little rough over the front legs.I would have used more infill also because with as little as 3% the model feels very cheap.Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing Groot on the Ultimaker 2! Multimaker 2015-02-02 | Printing Groot on my Ultimaker 2.Filament : Leaf Green by colorFabbModel : Groot Bust Sculpture by Doodle_MonkeyThingiverse : http://www.thingiverse.com/thing:478806Music : Castlevania II - Bloody Tears Remixed! by Audio SpritePrinted at 1.99x scale with support, layer height 0.1 mm, 50 mm/s, 6% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.Small Groot:Shining silver by colorFabbDon't remember scale.layer height 0.1 mm, 50 mm/s, 6% infill,220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Great model, looks amazing!So much detail! Love it!Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer, reach out on twitter for a faster response.
3D Printing two Battery Dispensers on the Ultimaker 2 Multimaker 2015-01-29 | Printing a cool Battery Dispenser on my Ultimaker 2.Filament : Shining Silver by colorFabbModel : Compact Tabletop Battery Holder by jgillickThingiverse : http://www.thingiverse.com/thing:310472Music : MegaMan - Elecman Remix by Audio SpriteAA Dispenser:Printed at scale, layer height 0.1 mm, 80 mm/s. 20% infill.220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.AAA Dispenser:Printed with height and width at x0.88, depth at x0.70, layer height 0.1 mm, 80 mm/s. 20% infill.220c on nozzle,60c on the bed, fan at 100% from 0,5mm up.As always used hairspray for bed adhesion!(Clynol Ultra Strong Hold)Great model, fits 12 batteries each.Easy to print! Follow me on twitter @Multimaker3DAnd like and subscribe right here for more 3D Printing videos!Please comment and i will answer.
