DIY Liquid Flux ⚡⚡FREE GIVEAWAY⚡⚡ UK postage only. Binary Bug 2020-10-20 | If you want a bottle of the liquid flux, (test tube of liquid flux, bottle with blunt needle, small funnel, and I will even pop in some pipettes, all you need to do is just sub to the channel and comment 'sub'd' or subscribed to let me know. After about 2 weeks, ill pick 3 names and will post a message to you asking for your address. UK only.
Ghost caught on film? Keep your eye on the human shape figure against the side of the house. Binary Bug 2023-11-20 | As per our last house, we have had many strange things happen whilst living at this new build. On a regular basis, we hear loud foot steps coming down the stairs, to the point your heart skips a beat, however when we look there is nothing, footsteps across the landing also. We get taps and scrapes down the back double doors at night, and no one is there. Kids toys go off during the night, as well as many other happenings. Was downstairs one night only one in the house, and could hear a keyboard being played, went to the stairs and it stopped, sat back down and it started again, this went on for so long, then went upstairs to one of the bedrooms and realised the kids keyboard was on on the floor. It got to the point we nic named it Colin the ghost, 'trying to humanise it and not make it sound so spooky', so whenever something happened, we just say its Colin. Caught this on our cam, and cannot explain it at all, again at the time, I was the only one in the house, when I noticed this on my laptop as the cams linked to it, so watched it as it happened then went to see if I could see anything but couldnt. Showed it to friends and family and weve all tried working out where in the room it must have been, and its where the kids toys are kept. In our last house, we had many many experiences with things happening. Pretty much anyone we knew who came to the house, also experienced things they couldnt explain. A lot of stuff I wont even go into, as it just sounds completely bonkers, I understand some believe in this others dont.Those that slept over said they would never stay over again due to these things, like children's whispering and lights being turned on and off, and those who merely visited for x amount of hours, also had strange experiences they could not explain.One friend who came with her husband, made a comment about the ghost in a facetious way, and after a bit she got up to go to the loo, passing through the kitchen, when we heard a pop and a small bang, she shouted ouch, so we went in only to find something had thrown a large tub of fishfood across the kitchen hitting said friend on the back of the head. The tub was on the floor next to her, when it should have been on the other side, she was rubbing her head when we went in.It maybe surreal for some to consider all this, however its just part of normal life now.
Ferrule Terminals and Crimpers - Dont miss the end! Binary Bug 2021-02-03 | Wait and watch till the end, I put the wire into a larger block for testing, with surprising results.
Never need a solder iron again? - How to easily solder wires together without an iron Binary Bug 2021-01-04 | Bought on ebay, however watch what you actually get in your kit. Some sellers include black heat shrink tubing as part of the quantity, so if they advertise 500pcs, they include 350pcs of black tubing, meaning you are only getting 150 actual connectors.
18650 Bulk Battery Charging Unit, using the TP4056 Charging Module. Binary Bug 2020-12-24 | A very easy and cost affective charging unit for 18650 batteries. .Be cautious buying charges from China, they tend to be not rated for UK usage, not only is the cable scarily thin, but the plugs are also substandard.In regard to fake 18650 one way to notice these, are anything around 4000mah or more, are more than likely fake. I have various ones, even going above 9000mah but I think legit ones are only going up to 4000mah, so anything over these are more than likely fake. They will of course work to a degree, and to be fair, I use these to power various things including torches, and they are fine for what I need.
I get tazered and yes it hurts, trust me, im a certified idiot. Binary Bug 2020-11-15 | 1. Dont try this at home, seriously, dont!2. Dont make one and take it out. In the UK we are not allowed weapons, and this could potentially be classed as a taser, meaning arrest by fire arms units, and quite possibly prison time.
DIY Solder Fume Extractor for £60 but can be done cheaper! Binary Bug 2020-10-21 | Total build cost is £61.12 but this isnt the cheaper option, you can without doubt do this for a lot less.Extractor £30.00Flexi Tubing £12.00 seen recently for £6ishEnd Cap £7.00x10 Filters £5.12Jubilee Clip £2.00Black Spray Paint £5.00As mentioned, there are other cheaper options opened to you, you could easily half the cost I paid on the flexi tubing, and im sure there are cheaper extractor units.Record your project and feel free to post a link below.
Low melt solder - Chip Quik Binary Bug 2020-10-12 | The video would have looked better, if I had remembered to do the last pin, nonetheless you get the idea, this stuff is very, very handy to have in your option box of ways to remove components. Low melt solder is unlike the normal solder you maybe used too. It remains molten for longer, enabling you to remove components easily.I bought the leaded version, as it has an even more lower melting point than the others, at just 53c.If buying a tube at around £40+ is a little too steep, you can buy just one stick, about 6" for around £7ish from ebay. Buy a stick and keep it to hand, one day it will get you out of trouble, and you will be thankful you bought it.
Desoldering through holes, and clearing them perfectly. Binary Bug 2020-10-11 | Ugh a typo at the start dam it! - oh well please excuse it this time :)Here is a very simply tip, on how to clear through holes, ready for soldering in another component. Dont laugh, it actually works very well!
Cleaning/strip down of the Japanese Engineer Solder Sucker 00-02 Binary Bug 2020-09-21 | Dont worry about popping open your new toy, it does not puke out springs and chit.Cleaning is a must, otherwise you will notice over time, a loss of suction.
Japanese Engineer Solder Sucker SS-02 Binary Bug 2020-09-21 | After one delay after another, ive finally got it, the much talked about SS-02.Is it possibly the best solder sucker going?
Dispensing Flux Pt2 - I changed my mind! Binary Bug 2020-09-20 | A while ago, I made a video about how to dispense solder flux or at least an easy way of doing it.Back then I bought a metal plunger, which I thought was good for the job, however 6 months on, do I still think its ok?
How to make solder paste, easy answer is dont! Binary Bug 2020-08-05 | Is making your own solder paste worth it?Here I show you how to make solder paste, my own view is dont! its fricken messy and the results are not that great.For the sake of what £3-£4 a tub/syringe, just buy one and keep it handy.It is easy to use, and moreover very forgiving.
How to use solder paste pt2 SEE MORE VIDS BY CLICKING ON MY CHANNEL NAME Binary Bug 2020-08-05 | SEE MORE VIDS BY CLICKING ON MY CHANNEL NAME.______________________________________________________My last video was not that great, so ive done another one to show that it is easy to use, and moreover very forgiving.When using solder paste, sometimes it just looks a mess, then you apply the heat, and it just rolls into place and looks a lot betterFor the sake of £3-£4 a tub/syringe, get one and have a play.
King Cobra Mobility Scooter Binary Bug 2020-08-03 | This is a King Cobra Mobility Scooter, price is around £4,500.Apologies for the dodgy camera work, however this is expected when you givethe camera to a 7 year old. King Cobra Mobility ScooterColour: GREYTop speed: 8mph (13kph)32 miles (51.5km) on a full battery - when 1 battery drains and gets low, the other kicks in. I did not know how this worked, then when I was getting low, and had turned the scooter off, it was only when I turned it back on, I noted I had a full battery, so they work independently, if you turn it off, and back on, it will go to the battery with the highest power, so do not think when the battery is low, that you will need to get home to charge it up, you have the secondary battery to get through as well! Adjustable headrest and armrestsElectromagnetic break system and emergency brakes All round suspensionAnti roll back safety systemReflectors and LED front, rear and brake lights Rear anti tip wheelsFreewheel facility Automatic speed reduction - this works well on hill decent. Adjustable rear view mirrorsStylish alloy wheelsDelta barsBottle/cup holderTwin USB power socketRecommended MK Gel batteries: 2 x 12V 96Ah Maximum weight capacity 32st (203kg)Maximum gradient 10°Length: 1700mm (67")Width: 730mm (29")Height: 1400mm (54")
What is solder wick/solder braid/soldamop, and how to use it. Binary Bug 2020-07-12 | Just a quick video showing what solder wick is and how to use it.Link to video showing the use of the 0.8mm wickyoutube.com/watch?v=t5XsqIErdlYLink to video showing the use of various ways to remove solderyoutube.com/watch?v=h4tZSzanL_I
How to use solder paste Pt1 - See end of video for link to Pt2 update. Binary Bug 2020-06-29 | Before you hit dislike like some! please remember I am merely a hobbyist, I do not do this as a job, and I am not trained, as may have guessed lol - I just learning as I go, and yes, I will cock-up from time to time (cock-up being an British colloquialism for messing up lol), so please be gentle! There are too many keyboard warriors who think they are always better and perfect in every way. Me, well I am just someone who plays with electronics and moreover I enjoy it, if anyone can take anything away from these videos, then I am a happy person, always enjoy what you do and pass on your knowledge to those with less. Not sure why but when I hit record, things go pear shaped! I am still getting used to recording and talking throughout, and trying to sound interesting throughout and yes much improvement is needed on the quality and length of the videos, so again please bear with me, I will hopefully get better in time. Youtube is a great tool to use, and that is all I do, when something comes up, I go onto yourtube and learn, its free and in your own time, and there are many members out there that we can learn from, some put a real effort and time into their videos and from my end, it is always appreciated, just remember, enjoy what you do and have fun, as mentioned I will hopefully improve in time, its just like anything else, it is a learning curve.
How to remove solder Binary Bug 2020-03-22 | Still need to get my setup ready for recording and working. Monitor was way off to my left, so did a poor job, but hopefully you will understand. 3 ways I use to remove solder 1. Solder Wick2. Solder Pump3. Heated Solder Pump
How to repair a usb stick for data recovery. Binary Bug 2020-03-19 | Appologies for the dodgy music editing. I wanted to cut out needless minutes throughout the video to reduce it down, and did it via youtube editor, I only realised afterwards that whilst I removed the video parts that were not needed, this then had a knock on effect with the music editing. I could have just removed the video and reloaded it, but didnt want to miss the views I had already. The other way was to pick from a list of music the youtube editor had, however listening to the choices, I disliked them all, terrible tracks. So I would rather keep the original with dodgy editing.Things will get better!Maybe an ugly repair, but ultimately it was about data recovery, not an award for best looking repair....thank god. Needless to say, all worked in the end. A few basic flaws but ive kept them in to show that things dont always work first time, and hopefully will remember these things for other videos.
Dispensing solder flux Pt1 - see end of video for Pt2 for an update! Binary Bug 2020-03-12 | Having watched a few videos on here, I see some people struggling with using the type of syringes, you get flux, solder paste and other things in.Here is what I do, which seems a lot easier than what some people are doing.
Add or remove read only from usb device Binary Bug 2020-02-24 | This is a very easy way to add, or remove read only to a usb stick.
How to repair a USB stick, the basics. Binary Bug 2020-02-11 | As mentioned, excuse the part where I scrape off the mask from the track. I do not have the set up right for repairing and filming, so it was difficult to do both, as I did not have a clear view. Also you have to understand the work is on a microscopic level, I cannot see the track im trying to scrape with the naked eye, its that tiny. So I struggled doing this and that shows in the video, so be gentle!I will figure out a better way to film, and work as I go. I will in a future video, show how microscopic this work is.Electronics nowadays, are not made to be repaired, as they are made on such a microscopic level, a microscope camera and other equipment is very much needed. I know this is not a how to step by step repair, I will do that again, however wanted to get this out there, hoping that it may furnish someone who needs help in repairing their memory stick, well, certainly just the basics.
Lapsun microscope camera problem pt2 Binary Bug 2020-02-05 | After doing what the seller advises I'm still not getting anywhere. Was buying this a big mistake?
Lapsun microscope camera problem pt1 Binary Bug 2020-02-05 | Issues with lapsun 21mp microscope cameraOnce in the line menu, and after finishing selecting and deselecting what you want, I cannot get out from that menu, on each occasion, I have pressed all buttons to see if they get me out, but nothing happens, it then removes the menu itself after 5 minutes or more waiting time.
tropical fishtank, marine style update Binary Bug 2008-05-05 | 2nd video of the fishtank I had, clearly using a potato camera to film this.
Tropical Fish Tank, Marine Style! Binary Bug 2008-01-10 | One of two old videos that I didnt want to remove, lovely tank miss them all.
