Making of - Incredible Detailed Knife Etching Epic Workshop 2021-02-14 | #epic #knife #damascus #etching #RDR2▶ Check out forging of the knife on Sperber Knives YouTube channel:youtu.be/Y5iHlw2da_g▶ Check out my Instagram:instagram.com/epic_workshop▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶ Thanks to my friend for design tracing and fixing. Check his work here:instagram.com/artem.graphicdesign/?hl=en▶ Thanks to Goran for printing the design on Vinyl for me.https://www.kupistambilj.hr/pecat_pula/I hope you like this collaboration I did with Sperber Knives. He did very good job on the blade and trust me I was so scared to do this etch.. only thinking how this could go very bad scares me.There is probably much better way to do this etch. I used what I had and what I hoped it would work.Thanks to my Brother for helping me :)Handle is made from Mahogany wood which is very old (90 yrs at least as my neighbor says) but I think it is way more old.I can't wait to read your comments and thoughts about it :DStay Epic BrosMorisLike, comment and share! SUBSCRIBE NOW
Faux Pirate Chest - Hollywood Style Epic Workshop 2023-06-09 | #pirates #chest #treasure #faux #woodworking EPIC15 for 15% Off Whole Store for the next 7 days. Click Here: bit.ly/EPIC15EPIC30 for 30% Off on the First Line Collection for the next 48h. Click Here: bit.ly/-EPIC30Hey Bros! This time I made Pirate chest for money donations when playing with my mate Mihael on street during summer. I hope you don't mind me playing accordion in the background :P▶ Plans from other Projects available for purchase:Send a mail on: kingofepic96@gmail.com▶ Support me on Patreon to access videos with music and without ads:patreon.com/EpicWorkshop▶ Get New Epic Merch Here:epic-workshop.creator-spring.com▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/KatalogThank you so much for following my Work 😊🤘🍻
Herugrim: The Sword of Théoden - Making of Epic Workshop 2023-05-12 | Please consider supporting me on my Patreon 😊Thank you for Watching! Be sure to watch full build on my Channel!Epic Workshop
Herugrim: Sword of King Théoden - Making of Epic Workshop 2023-05-12 | #lotr #sword #art #asmr #rohanHey Bros, In this video I made a sword from Lord of the Rings. Big thanks to Anja and Uni for helping me make this final shots absolutely EPIC!▶ Plans Available for Purchase:Send a mail on: kingofepic96@gmail.com▶ Support me on Patreon to access videos with music and without ads:patreon.com/EpicWorkshop▶ Get Epic Merch Here:epic-workshop.creator-spring.com▶ Get your FLUX Laser Here:aff.flux3dp.com/epicworkshop▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/Katalog SUBSCRIBE NOW
Elder Wand Harry Potter Making Epic Workshop 2023-03-23 | Link to full video:youtu.be/3-5bP1Bfdb4Link to full video with music and without ads on Patreon:patreon.com/EpicWorkshop▶ Get your FLUX Laser Here:fluxlasers.com/?ref=ytriywfThanks for Watching!Epic Workshop
Elder Wand from Harry Potter - Making of Epic Workshop 2023-03-23 | #harrypotter #elderwand #hogwartslegacy #asmr This time we delve into Harry Potter World to make the famous Elder Wand!Matija made an Epic Intro for this video :)I hope you like it!▶ Plans Available for Purchase:Send a mail on: kingofepic96@gmail.com▶ Support me on Patreon to access videos with music and without ads:patreon.com/EpicWorkshop▶ Get Epic Merch Here:epic-workshop.creator-spring.com▶ Get your FLUX Laser Here:aff.flux3dp.com/epicworkshop▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/Katalog▶ Bosch Professional:bosch-professional.com/hr/hr/?fbclid=IwAR012ahp-ESDPFkMd-562WbuBRELnzWNS7EjTbe222701dPfuplR_y7Q8eE Thank you for Watching!Moris,Epic Workshop
200 Layers Wooden Damascus Bollock Dagger! Epic Workshop 2023-02-28 | #dagger #wood #art #asmr #relaxingHey Bros, In this video I made possibly the first Wooden Damascus Bollock Dagger, it actually has 195 layers :P and it looks absolutely stunning! Big thanks to Astrid and Matija for helping me :)I really hope you like it!Moris▶ Plans Available for Purchase:Send a mail on: kingofepic96@gmail.com▶ Support me on Patreon to access videos with music and without ads:patreon.com/EpicWorkshop▶ Get Epic Merch Here:epic-workshop.creator-spring.com▶ Get your FLUX Laser Here:aff.flux3dp.com/epicworkshop▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/Katalog▶ Bosch Professional:bosch-professional.com/hr/hr/?fbclid=IwAR012ahp-ESDPFkMd-562WbuBRELnzWNS7EjTbe222701dPfuplR_y7Q8eE▶ Bosch Professional Hrvatskayoutube.com/channel/UCSnPzc2cxlV5BicR4kM64fw
I Made a Wooden Katana Epic Workshop 2022-02-11 | #katana #wood #art #detail #relaxingHey Bros, In this video I will show you how I made wooden katana. It was quite a process to make one but I think it turned out very nice. I did a lot of research on it and I hope I did it justice :)I really hope you like it!Moris▶Plans Available for Purchase:Send a mail on: kingofepic96@gmail.com▶Get Epic Merch Here:epic-workshop.creator-spring.com▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Get your FLUX Laser Here:aff.flux3dp.com/epicworkshop▶Bosch Professional:bosch-professional.com/hr/hr/?fbclid=IwAR012ahp-ESDPFkMd-562WbuBRELnzWNS7EjTbe222701dPfuplR_y7Q8eE▶Bosch Professional Hrvatskayoutube.com/channel/UCSnPzc2cxlV5BicR4kM64fw▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/KatalogLike, comment and share! SUBSCRIBE NOWMusic:"Ishikari Lore" Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 4.0 Licensehttp://creativecommons.org/licenses/by/4.0
Epic Bosch Cabinet with Hidden Storage Epic Workshop 2021-12-24 | #bosch #professional #tools #woodworkingBosch asked us to make a cabinet... and we did it!▶Bosch Professional:bosch-professional.com/hr/hr/?fbclid=IwAR012ahp-ESDPFkMd-562WbuBRELnzWNS7EjTbe222701dPfuplR_y7Q8eE▶Bosch Professional Hrvatskayoutube.com/channel/UCSnPzc2cxlV5BicR4kM64fw▶ Support me on Patreon:patreon.com/EpicWorkshopLike, comment and share!SUBSCRIBE NOW
Epic Bosch Cabinet Teaser Epic Workshop 2021-12-23 | #bosch #professional #tools #woodworkingTeaser Trailer for Bosch Cabinet, Absolutely EPIC!▶Bosch Professional:bosch-professional.com/hr/hr/?fbclid=IwAR012ahp-ESDPFkMd-562WbuBRELnzWNS7EjTbe222701dPfuplR_y7Q8eE▶Bosch Professional Hrvatskayoutube.com/channel/UCSnPzc2cxlV5BicR4kM64fw▶ Support me on Patreon:patreon.com/EpicWorkshopLike, comment and share! SUBSCRIBE NOW
Medieval Banners for Epic Workshop? Using FLUX Laser Cutter! Epic Workshop 2021-11-19 | #goldleaf #medieval #music #decorationHey Bros! In this video we made a quick project to decorate our workshop using laser cutter from FLUX and I think it came out very neat! Definitely gives different vibe to the workshop! EPIC 🤘▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Get your FLUX Laser Here:aff.flux3dp.com/epicworkshopLike, comment and share!SUBSCRIBE NOW
Shop Upgrade: Viking Inspired Paper Towel Holder Epic Workshop 2021-11-07 | #workshop #upgrade #paperholder #vikingThis week my Brother brings you his quick "shop upgrade" project that took him 3 days to make.▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check out Mekanika:mekanika.io▶ CNC model I have:mekanika.io/shop/cnc-pro-s-mekanika-pro-s-2015?category=3#attr=Like, comment and share! SUBSCRIBE NOW
Rasp Cabinet Making - ASMR Epic Workshop 2021-10-19 | #epic #cabinet #toolcabinet #asmr▶ Get Surfshark VPN at: https://surfshark.deals/EPIC and enter code EPIC for 83% off and 3 extra months for FREE!▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Get your FLUX Laser Here:aff.flux3dp.com/epicworkshop▶ Check out Mekanika:mekanika.io▶ CNC model I have:mekanika.io/shop/cnc-pro-s-mekanika-pro-s-2015?category=3#attr=▶ Liogier Rasps: https://www.liogier-france.frHey Bros, this time I decided to do ASMR type of video to try something new. it took us almost 3 weeks since making to uploading and I really hope you like it.Like, comment and share!SUBSCRIBE NOW
I Made WOODEN Revolver With 40 Mechanism Parts (RDR2) Epic Workshop 2021-08-21 | #Colt1873 #Wooden #RDR2 #epic▶Plans Available for Purchase:Send a mail on: kingofepic96@gmail.com▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Get your FLUX Laser Here:aff.flux3dp.com/epicworkshop▶Check out Mekanika:mekanika.io▶ CNC model I have:mekanika.io/shop/cnc-pro-s-mekanika-pro-s-2015?category=3#attr=▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/en-GB/BESSEY-ToolHey Bros 🤘So.. This video took so long to make (7 weeks), but it's finally finished and I hope you will enjoy! Colt 1873 is my favorite revolver and I challenged myself to make a wooden version (Beech!) with a working mechanism. I am also excited to be working with Flux who gave us the laser used in this video.Since I was making plans from scratch it was a difficult and slow process, a lot of things went wrong and I had to remake certain parts many times until I got it right. The printable plans are available on my Patreon. Big thanks to my brother Andrea, Mihael (the dead guy and guitarist) and Emma for help with the video! See you with new project soon :)MorisLike, comment and share! SUBSCRIBE NOW
Gimlis Axe - Making Of Realistic Replica Prop(LOTR) Epic Workshop 2021-04-30 | #lotr #prop #wood #art #replica #gimli #axe▶ Support me on Patreon:patreon.com/EpicWorkshop▶Check out Mekanika:mekanika.io▶ CNC model I have:mekanika.io/shop/cnc-pro-s-mekanika-pro-s-2015?category=3#attr=▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/en-GB/BESSEY-Tool▶ New Bessey Tools catalogue:https://www.bessey.de/en-GB/BESSEY-Tool/Support/Downloads/Catalogue▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶Check out Lukasz Kapuscinski YT Channel:youtube.com/c/GuitarsDragonsI hope you like it !Like, comment and share!SUBSCRIBE NOW
Overkill Workbench with Gothic Arches and RGB lights for my new CNC Epic Workshop 2021-04-17 | #cnc #workbench #mekanika #rgb #epic ▶ Support me on Patreon:patreon.com/EpicWorkshop▶Check out Mekanika:mekanika.io▶ CNC model I have:mekanika.io/shop/cnc-pro-s-mekanika-pro-s-2015?category=3#attr=▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/en-GB/BESSEY-Tool▶ New Bessey Tools catalogue:https://www.bessey.de/en-GB/BESSEY-Tool/Support/Downloads/Catalogue▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶Check out Lukasz Kapuscinski YT Channel:youtube.com/c/GuitarsDragonsI hope you like it !Like, comment and share! SUBSCRIBE NOW
Epic Faux Medieval Door Epic Workshop 2021-01-24 | #epic #faux #door #medieval▶ Support me on Patreon:patreon.com/EpicWorkshop▶Check Jan Valta and Adam Sporkayoutube.com/channel/UCeOFyzl1fksnn8Dv7wWSoUQ▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/Katalog▶ Check what Tools I use on Kit: kit.co/EpicWorkshopMy Brother had an idea to make these doors long time ago and we finally did it!The doors were simple and ugly looking and they needed some improvement so we decided to make them EPIC!We used pine, MDF and plywood with hot glue gun, some nails and a lot of work :PI hope you like it !Big Thanks to Jan Valta for letting me use his and Adam's amazingly beautiful music!Music:Beer and WomenRattay Atmosphere 9Rattay FeastsRattay Nibbles 16 and 15Talmberg Nibble 10Town Atmosphere 16Town Atmosphere 17Town Atmosphere 18Town Atmosphere 19Brotherhood of BraveryFist FightHammers and SpadesHer LadyshipLandscape Nibble 28Poverty and FamineTill Our Heads Turn White Nibble 1Town Nibble 26Like, comment and share!SUBSCRIBE NOW
Epic Shelf for my Tobacco cabinet Epic Workshop 2021-01-12 | #woodwork #shelf #epic #dovetail #handmade▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/▶Check out Lukasz Kapuscinski YT Channel:youtube.com/c/GuitarsDragons▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/Katalog▶ Check what Tools I use on Kit: kit.co/EpicWorkshopThanks to Lukasz for letting me use his music. Your music makes my videos what they are and I urge you to visit his channel and subscribe to him!Since my tobacco cabinet had no place to be I made a shelf for it and of course it had to be EPIC!I really like fake dovetail ;)I used Oak and American Black WalnutI hope you like it :)Like, comment and share!SUBSCRIBE NOWLike, comment and share! SUBSCRIBE NOW
Making An Epic Hourglass Epic Workshop 2020-12-07 | #hourglass #woodworking #art #epic▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/▶Check out Lukasz Kapuscinski YT Channel:youtube.com/c/GuitarsDragons▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/Katalog▶ Check what Tools I use on Kit: kit.co/EpicWorkshopFirst of all Thank you Lukasz for letting me use your music. This really helped me and it made the video so much more Epic :DI always wanted to have an Hourglass but I never thought I will.. well until now :) I went with the blue sand because it is more magical and it is like water and more visible (actually pretty darn visible hahah)I used Oak, American Black Walnut and Copper wire.Hourglass is timed to 30 minutes and 25ish seconds +/- 5 sec(really surprised with the accuracy)I hope you like it :)Like, comment and share! SUBSCRIBE NOW
Making of Andúril - Flame of the West - Aragorns sword Epic Workshop 2019-06-17 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/▶Check out Lukasz Kapuscinski YT Channel:youtube.com/c/GuitarsDragons▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/Katalog▶ Check what Tools I use on Kit: kit.co/EpicWorkshop Hey Bros, As First thanks for 100 000 Subs :DFor this video I made Andúril out of beech wood. It took me about 8 days every day from 9 am to 11 pm (sometimes after midnight) it was a lot of work but it is worth it! I am also super thankful to Lukasz Kapuscinski, not only for letting me use his music for video, but for making beautiful arrangements for guitar. I personally play many of his arrangements because they are simply absolutely beautiful !! Thank you Lukasz :) I hope you like the video :)About Sword:134.4 cm total length103.2 cm blade lengthmade out of beech woodgrip made from genuine leather - tinted blackSwords runes:AnarNányë Andúril i né Narsil i macil Elendilo.Lercuvanten i móli Mordórëo.Isil'Sun.I am Andúril who once was Narsil, sword of Elendil.The slaves of Mordor shall flee from me.Moon.'There is also elvish writing on the pommel, which was on Narsil before Andúril was made from Narsil shards, but that was a bit too complicated to carve so I didn't do it because I could mess up whole sword.Pommel Elvish text:Narsil essenya, macil meletya; Telchar carnéron Návarotesse 'Narsil [is] my name, [a] mighty sword; Telchar made me in Nogrod' Your Epic Workshop, MorisLike, comment and share!SUBSCRIBE NOW
Making Shields from Kingdom Come Deliverance Game Epic Workshop 2019-06-07 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/Katalog▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶ Get the Kingdom Come Deliverance now! - Steam: http://bit.ly/2waBuls - PlayStation®4: http://bit.ly/2ilNbQF In this video I made 3 shields from Kingdom Come Deliverance Game. One is less then more historical but close enough XP. Other two shields are wall hangers.- First one is the coat of arms from z Dvorce (Radzig Kobylas Family).- Second one is the coat of arms of Talmberg.- Third one is the coat of arms from z Lipé (Hans Capos family).▶ Shield Measurements:- Shield size is 48 cm wide x 61 cm high (46 cm when bent)- 1st and 3rd Shield are made from 2 sheets of 4 mm plywood- 2nd Shield is made from 15 mm thick planks. Width is 43 mm on the narrower side with 2.3(-ish) degrees.When you make one I would love to see it. Feel free to send me the photo of it on Instagram: epic_workshop :)I really hope that you like the video :DHave an EPIC day bros !!!Moris▶ Beautiful Music composed by Jan Valta and Adam Sporka:Village Atmosphere 5City Music 3LandscapesFist FightRattay FeastsGood Luck, SonBeer and WomenVillage Atmosphere 8Poverty and Famine [Explicit]Brotherhood of BraveryLike, comment and share!SUBSCRIBE NOW
Making of EPIC Dice Poker - From Witcher 2 Epic Workshop 2019-03-22 | This video is not sponsored. Big Thanks to CD PROJEKT RED for permission to use their awesome music.▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Be sure to check Karlo's Etsy:etsy.com/shop/PlywoodEnt▶ Karlo's Instagram:instagram.com/plywoodentshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶ You can download edited photo for FREE of the art from the board on my Patreon. And measures.▶ Check out Amazing Bessey Clamps here:https://www.bessey.de/▶ Bessey Tools catalogue:https://www.bessey.de/en-GB/BTG/Service/Downloads/KatalogHey Bros, I hope you like this long video :P I really could't make it shorter. I expected this to be simple but those dices didn't went as I planed but luckily Karlo saved me with 3D printed dices because I was really tired and frustrated and I almost went with the normal dices, but it would suck if I did. Looks like my OCD helped this time XD I can't wait to hear your opinions and thoughts about the build and video :)Also big thanks to Mihael for beating me in poker, to my brother for advices and help with the build and to my father for hammering action on the dices :DYour Epic WorkshopRules for Dice Poker if you want to beat your friends :) Have Fun !Nothing - Player with Highest dice number winsPair - Two dice showing the same value.Two Pairs - Two pairs of dice, each showing the same value.Three-of-a-Kind - Three dice showing the same value.Five High Straight - Dice showing values from 1 to 5.Six High Straight - Dice showing values from 2 to 6.Full House - Pair of one value and Three-of-a-Kind of another.Four-of-a-Kind - Four dice showing the same value.Five-of-a-Kind - All five dice showing the same value.P.S. You have to beat other opponents before playing with me! X'D▶ Music:Intro song: Witcher 2: Into the FieldsWitcher 2: Dwarven Stone Upon Dwarven StoneWitcher 2: A Tavern on the RiverbankWitcher 2: Flotsam at SunriseWitcher 2: A Nearly Peaceful PlaceWitcher 2: A Watering Hole in the HarborWitcher 2: Dice Poker ThemeWitcher 1: Dice Poker ThemeLike, comment and share!SUBSCRIBE NOW
Epic Moxon Vise (Viking Inspired) Epic Workshop 2019-02-23 | ▶ Be sure to visit my Brother YT Channel: youtube.com/user/ArzensekAndrea▶ Support me on Patreon:patreon.com/EpicWorkshop▶FjallThurs Instagram Page:instagram.com/fjallthurs/?hl=en▶ Check what Tools I use on Kit: kit.co/EpicWorkshopI hope you like this build of moxon vise, it works awesome and it fits to my workshop nicely. Me and my Bro made it from Oak and Walnut. Threads are made from beech wood.▶Music:Around The Fire - TES V - Epic Workshop CoverLord of the Land by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1400022Artist: http://incompetech.comAchaidh Cheide - Celtic by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100340Artist: http://incompetech.comArcadia - Wonders by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100326Artist: http://incompetech.comLike, comment and share!SUBSCRIBE NOW
Seax Knife - Making of Epic Workshop 2019-02-08 | ▶Black Beard Projects Channel:youtube.com/channel/UC8q2GgxOUS_Dzd5KIYeJQIw▶FjallThurs Instagram Page:instagram.com/fjallthurs/?hl=en▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshopI hope you like this collaboration I did with BlackBeard Projects. Since this was my first time making a handle for the knife I probably made some little mistakes along the way but knife works perfectly. I think it turned out awesome.Please be sure to comment and share with your friends and family :)Stay Epic Bros Moris▶Music:Skyrim Dragonborn - Epic Workshop CoverOde to the Fallen - Epic Workshop Cover - Lukasz Kapuscinski arrangement of Adrian von ZieglerGalway Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0"Teller of the Tales" Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0Like, comment and share!SUBSCRIBE NOW
Wooden Winchester 1873 With Functional Mechanism (RDR2) Epic Workshop 2018-10-26 | #rdr2 #lastofus #rifle #woodworkHello Bros, For this video I went big! I made my favorite rifle and I also showed you that I really love (LOVE!!!) Red Dead Redemption 2. I really hope you like it, me and Mihael had too much fun recording that ending "movie" hah it is kind of rough but it was recorded in less than 2 hours, so I didn't had lot of footage to work with. I cannot wait to read your comments and thoughts about it :DP.S. I don't have printable plans for it. sorry 😓I found pictures of mechanism on internet and some measurements on different blogs and pages.Moris, Epic Workshop▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshopJenny's Theme by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comBanjo Short by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comLike, comment and share!SUBSCRIBE NOW
Epic Pirate Cutlasses - Entirely From Wood Epic Workshop 2018-10-13 | I made these two Cutlasses from wood. ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshopMusic:Sailors Lament by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comLike, comment and share!SUBSCRIBE NOW
EPIC Handmade Drawer Pulls for Tobacco Cabinet Epic Workshop 2018-09-08 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshopHere is how I made drawer pulls for my Tobacco cabinet, I used Black Walnut and Ash.Music: Wistful HarpLike, comment and share!SUBSCRIBE NOW
Epic Tobacco Cabinet: My first Cabinet Ever Epic Workshop 2018-08-04 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop I made the Cabinet for Tobacco Storage from Oak and Black Walnut. This is my first attempt at making cabinet (furniture) and also it is my own design. And yeah about the Hide glue, I used it because at that point of video I actually got it so I wanted to try it, works like a charm but you don't have a lot of working time with it ( 1.20 min maybe).... later when I was gluing the big Walnut panel I was afraid to use the hide glue because of working time, with PVA (Wood Glue) I have 15 mins of working time. But I definitely adore the glue, works better than PVA because it lubricates the joint much better while PVA is like gum and it makes is harder to fit the joint... Hope you understand why I was using the Hide glue and PVA glue :) Music is recorded on guitar and mandolin entirely by me.Songs:Ode to Fallen - Adrian von ZieglerMatts Jig - StrongholdLord of The Rings Medley - Lukasz KapuscinskiAround the Fire - SkyrimFall of the Magister - Dragon Age InquisitionYou can purchase my Music on Patreon :)Arcadia - Wonders by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100326Artist: http://incompetech.comLike, comment and share!SUBSCRIBE NOW
50K Epic Bros - Special Video Epic Workshop 2018-03-03 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop Short funny video to celebrate 50 000 of you Epic Bros :) I am so happy that we hit 50K, see ya at 100k !!Since it snowed (03.01.2018) in Croatia (which is not typical) I took an opportunity to make some nice shots with all viking "things" and mine and my best friend swords I made :) I hope you like it :)Like, comment and share!SUBSCRIBE NOW
Kingdom Come Deliverance - Henrys Sword Epic Workshop 2018-02-28 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop Get the Game now! Steam: http://bit.ly/2waBuls PlayStation®4: http://bit.ly/2ilNbQF I am a big fan of Kingdom Come Deliverance game so I decided to make Henry's sword which was originally made by his father for Sir Radzig.You can see the sword on:- youtube.com/watch?v=ozX1-ojzq1M&t=21s - and on the cover of the game :)Have an EPIC day bros !!!MorisLike, comment and share!
Making of Egyptian Khopesh - Based on Tutankhamuns Design Epic Workshop 2018-01-27 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop This time I made Egyptian Khopesh which is based on similar one found in Tutankhamun's tomb. I only added those spirals near the handle.Don't whine about the Arabian music in Egyptian era video,I am really sorry but Tutankhamun forgot to bring his hard disc with Egyptian music on it :/I used white oak wood, but I wouldn't recommend it because it is very porous and it has screwed up grain. I would usually use beech but I wanted to test white oak in this video.I used gold spray and then painted it with aquarel (water colors), when paint is fully dry wet a piece of towel paper and remove as you see fit. If you remove too much re-apply aquarel again ;)I hope you liked it, see you with the next project soon :DMorisSUBSCRIBE NOWMusic:- Arabian Night's- Shesh PeshArabian Bazaar by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://www.twinmusicom.org
Egyptian Wall Art (ACO) Epic Workshop 2017-12-16 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop What`s up Bros and Sisters :D For this videos I made huge wall art in my shop :) I am a fan of Assassin`s creed games and the latest one is set in Egypt, though even since Age of Mythology game (childhood memories) I was in love with Egyptian, Greek and Norse factions :DI used acrylic paint and for wall base color I used pigments and normal indoor white wall paint.Take in mind that those hieroglyphs are in random order and not historically correct + I only used ones which I like the most XPLike, comment and share!SUBSCRIBE NOWJalandhar by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1400018Artist: http://incompetech.com
Epic Double Forge Bellows Epic Workshop 2017-12-05 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop Ok... have been editing this video 3 times from scratch because my PC is about to die... (R.I.P. my PC) I am kind of crazy...I used pine for construction and fake leather ( yeah I know, but real leather is way too expensive) It is functional and that is what matters :)If you want to see how I did the metal effect on wolf heads watch Nordic Mace video ;)I don`t have any plans for this I watched several videos and look at the pictures on Google and made my own ;) Music:Lord of the Land by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1400022Artist: http://incompetech.comFiresong by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100598Artist: http://incompetech.com
King Roberts Warhammer - Game of Thrones Epic Workshop 2017-11-17 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshopThis time I am making the replica of the war-hammer from king Robert`s with my brother :)I hope you like it as much as I do :D Like, comment and share!SUBSCRIBE NOWDark Times Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0Epic Unease by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100406Artist: http://incompetech.com
Skyrim Nordic Mace - Making of Epic Workshop 2017-10-25 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop This time I am making Nordic mace from Skyrim, I hope you like it and Talos guide you!Like, comment and share!SUBSCRIBE NOW
Jon Snows Longclaw (Game of Thrones) - Making of Epic Workshop 2017-09-26 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop This was an amazing build of the Jon Snow's sword for my best friend :DI actually recorded a Game of Thrones Theme for ending shots, but I got a copyright strike, so I removed the song :( It took me 20 hours to make it :/ As always, Have an EPIC day :D Like, comment and share!SUBSCRIBE NOW
Hand Made Viking Drinking Horn Epic Workshop 2017-09-11 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop Read the Description!!! :D :PBig thank to my friend Mihael, who helped me with drinking... :PBe sure to use Food Safe glue and finish on the horn!I know how to drink from the horn, but I wanted to get better shot with the camera, and also it looks more barbaric with the tip to the sky :DThis is an easy alternative to make your own drinking horn, if you cannot buy/get one (like me) :/ The horn is made out of wood shavings and towel paper and can hold 1 L of beverage, which is tested, be sure to use a lot of layers (5 or more) to get strong structure ;)Music was recorded by me :D I hope you like it :3Like, comment and share!SUBSCRIBE NOW
Medieval Style Manuscript - Making of Epic Workshop 2017-09-03 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop This time I am making a medieval style manuscript. Calligraphy was one of my favorite subjects in art school, I decided to make one for the video :) I recorded the music myself on my mandolin :)I used broad style nib or chisel edge nib, normal ink, and thicker paper.I hope you like the video :) See ya soon!MorisTranslation:(very big D)ear Epic Bros:This week I got infected with laryngitis so I opted for less demanding project. Thank you for your support. Please continue sending your comments and wishes. I will gladly respond and try to realize them. MorisEpic Workshop3. September 2017. Dragon :PLike, comment and share!SUBSCRIBE NOW
EPIC THORS INSPIRED USABLE MALLET!!! Epic Workshop 2017-08-26 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop READ THE DESCRIPTION! Big thanks to my friend Jarne for making the beautiful design!here is his Instagram account: instagram.com/jarne_dragonson/?hl=hrBe sure to check him out he likes to draw dragons a lot and he is very good at it, but also many other epic things :) I don't have measurements :( I draw everything from my headMusic was recorded by myself :3 I hope that you like it :DI am not selling anything yet, sorry :( :/I hope that you enjoy the videos feel free to comment down bellow :DBe sure to tell me:that ending ruined the video ;) that the handle is to short if you connect it to marvel Thor hammer :Pthat hammer would be impractical :Dand many other things XPAnd as always, STAY EPIC BROS!! :DIf you are wondering why I didn't upload for 4 months So I was working whole summer like a tour guide on the ship, and during the night I was playing the guitar on the street (which I still do) so with 2 jobs I unfortunately didn't had time to record videos so I had a gap of about 4 months, but now I made a dismissal at work, and now I am back at making videos full time :D which makes me super happy! Like, comment and share!SUBSCRIBE NOWKillers Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0
Epic Viking Spear Made Out Of Wood - Making Of Epic Workshop 2017-04-15 | ▶ Support me on Patreon:patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshop This time watch out for flying spears...Handle is made from curtains holder (pine) and the point is made out of beech pallet wood :)Lukasz Kapuscinski Channel:youtube.com/user/lukkap92Adrian von Ziegler Channel:youtube.com/user/AdrianvonZiegler Like, comment and share!SUBSCRIBE NOW
The Valknut Pendant - Making of Epic Workshop 2017-04-01 | ▶ Support me on Patreon: patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshopI've made this pendant for my mom's birthday.I've made it from Olive wood which is very widespread here in Istria where I live, hope that you will enjoy and be sure to ask if you have any questions :)Here is some history about Valknut:The Valknut (pronounced “VAL-knoot”) is one of the most widely-discussed yet enigmatic of all of the symbols that appear in connection with Norse mythology. Visually, it’s comprised of three interlocking triangles. Archaeologically, it appears on several runestones and pictorial memorial stones that date from the Viking Age and stand on the Swedish island of Gotland, as well as on grave goods from the Oseberg ship burial in Norway.[1] Its name isn’t mentioned in any period sources; valknut is a modern Norwegian compound word that means “knot of those fallen in battle” and was introduced by Norwegians who lived long after the Viking Age.Like, comment and share!SUBSCRIBE NOWAchaidh Cheide - Celtic by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100340Artist: http://incompetech.com
Trick With Tools That Are Made In China Epic Workshop 2017-04-01 | ▶ Support me on Patreon: patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshopI've made this video to show the world the amazing trick with tools that are made in ChinaLike, comment and share!SUBSCRIBE NOW
EPIC Bilbo Baggins Pipe - Making of (the original) Epic Workshop 2017-03-25 | ▶ Support me on Patreon: patreon.com/EpicWorkshop▶ Check what Tools I use on Kit: kit.co/EpicWorkshopI am a big fan of Lord of the Rings and Hobbit and other Tolkien masterpieces so for this video I decided to make Bilbo Baggings wooden pipe.I used Maple for stem and Dogwood for bowl 🤘Music on Classical guitar was played by me and arranged by Lukasz Kapuscinski who also has a YT channel so go and check him out :)Hope that you will enjoy this video :)Stay Epic :)~M~Like, comment and share!SUBSCRIBE NOW
Metal Looking Viking Helmet out of Wood Shavings Epic Workshop 2017-03-18 | ▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶ Support me on Patreon:patreon.com/EpicWorkshopSince I have other viking equipment why not add a Viking helmet to collection :)Thank you guys for more than 1000 Subscribers :DWood shavings thickness 0.01 mm up to 0.03 mm Hope that you will enjoy this video :)Stay Epic :)~M~Like, comment and share!SUBSCRIBE NOWKillers Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0Skye Cuillin Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0
Candle Lamp or Beer Coasters? Epic Workshop 2017-03-11 | ▶ Support me on Patreon: patreon.com/EpicWorkshop▶ Check out my gear on Kit: kit.co/EpicWorkshopFor this week I made this awesome looking lamp which can be disassembled to become a beer coasters :DI used plywood and pine for bottom.And yes, I made music for this video :)Like, comment and share!SUBSCRIBE NOW
Epic Wooden Viking Bearded Axe Epic Workshop 2017-03-04 | ▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶ Support me on Patreon:patreon.com/EpicWorkshopSince my audience wanted me to make an bearded Viking axe I decided to make one and here it is.I used beech wood from an old table from school for axe head,handle is made out of pine and stained with Palisander tint (Brazilian rosewood) and charred with a candle :)The technique for aged metal first to seal it with sealer (in my case it is Nitro lacquer) then spray 2 or 3 coats of silver spray and then black from far away. When that step is done it's gonna look like cast iron, and then trick is to apply the paint thinner on piece of cloth and lightly spread it on until you are happy with look :)I hope that you will enjoy this project and if you have any other questions please comment down bellow or you can send me a message via Instagram (Epic Workshop). Like, comment and share!SUBSCRIBE NOWThe Pyre Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0
Old Spinning Mirror - Making Of Epic Workshop 2017-02-25 | ▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶ Support me on Patreon:patreon.com/EpicWorkshopThis week I decided to make a mirror for my mom because she didn't like the old one. She choose floral design to be carved on it and to be white as the angel she has.I used cedar wood which was resawn by my father and me 8 months ago.Like, comment and share!SUBSCRIBE NOWAcoustic Guitar 1 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.com
Real Metal Looking Sword Out Of Pallet Wood Epic Workshop 2017-02-18 | ▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶ Support me on Patreon:patreon.com/EpicWorkshopI have always wanted a sword, since I made a viking shield it needed the Viking sword to go with... but of course I decided to write on it legendary +ULFBERH+T ( Ulfberht) which is my favorite sword :D The sword is in real size and proportion and fits absolutely amazing in my hand Overall length: 93.3Blade length: 78.8 cm (but in the end it came out 78.4)Blade width: 5 cmGrip length: 9.6 cmWeight: 183 gramsIf someone reads description maybe can tell me what this P with X and two dots means I would appreciate it :)I am very sorry but I didn't harden nor temper this blade :(Like, comment and share!SUBSCRIBE NOWMusic:Village Consort Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0
Viking Shield - Making Of Epic Workshop 2017-02-11 | ▶ Check what Tools I use on Kit: kit.co/EpicWorkshop▶ Support me on Patreon:patreon.com/EpicWorkshopI made this shield using pine wood which was from roof structure.The planks are 8 mm thick, so whole shield is 16 mm thick. Shield diameter is 80,5 cm which is historically accurate although the measures varied from 75 - 90 cm.I used metal thumbtacks to attach the eco leather around the rim.The leather is sewed by my father :)The cloth is actually my old bed sheets (linen)The shield boss is a cheap dog bowl from stainless steel, I used hydrochloric acid to achieve aged look. The bowl was shaped by my neighbour Vittorio who is a metal worker.And also thanks to my brother Andrea and his wife Barbara for helping with shield :)Like, comment and share!SUBSCRIBE NOWLord of the Land by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1400022Artist: http://incompetech.com
