The Okayest EngineerIn today’s video, I walk you through my full plug-to-mold process using composites. I show the exact steps I used to turn my finished plug into a high-quality fiberglass mold, including surface prep, sealing, waxing, gelcoat, layup, and demolding. If you’ve ever wanted to build your own composite parts—or just wanted to understand what goes into making professional tooling—this video covers everything.
What you’ll learn in this video: • How to prep a plug for molding • What materials I use and why • How many coats of wax/PVA you actually need • Best gelcoat spraying/brushing techniques • Timing between layers • How to build strong composite molds • Common mistakes to avoid • How the final mold turned out
Whether you’re working on automotive parts, aviation components, marine molds, or a DIY composite project, these techniques will help you get professional results at home.
Huge shoutout to @fibreglast for sponsoring this video and sending me all the materials to make this mold. They seriously made this round go a whole lot smoother.
Use coupon code BFRIDAY25 for 25% off orders over $250.00
Custom Carbon Fiber Helicopter Seat Part 2 | Basement Kit Helicopter Ep. 21The Okayest Engineer2025-11-27 | In today’s video, I walk you through my full plug-to-mold process using composites. I show the exact steps I used to turn my finished plug into a high-quality fiberglass mold, including surface prep, sealing, waxing, gelcoat, layup, and demolding. If you’ve ever wanted to build your own composite parts—or just wanted to understand what goes into making professional tooling—this video covers everything.
What you’ll learn in this video: • How to prep a plug for molding • What materials I use and why • How many coats of wax/PVA you actually need • Best gelcoat spraying/brushing techniques • Timing between layers • How to build strong composite molds • Common mistakes to avoid • How the final mold turned out
Whether you’re working on automotive parts, aviation components, marine molds, or a DIY composite project, these techniques will help you get professional results at home.
Huge shoutout to @fibreglast for sponsoring this video and sending me all the materials to make this mold. They seriously made this round go a whole lot smoother.
Use coupon code BFRIDAY25 for 25% off orders over $250.00
With very little room inside the cowling, everything had to be carefully packaged around the engine, airframe, drivetrain, and other components. I started by working through the geometry in CAD, then turned those designs into real parts and installed them on the helicopter.
I’ll walk through the reasoning behind the layouts, the compromises I had to make, and how closely the finished installation matched the original CAD model.
This project is a great example of why designing something is only half the challenge—the real test is making it fit and function in the real world.
#ExperimentalAircraft #HelicopterBuild #CompositeFX #XE290 #HomebuiltAircraftI Installed a Snowmobile Engine in My Helicopter | Basement Mosquito Helicopter Ep. 31The Okayest Engineer2026-06-06 | After months of building, fitting, and planning, the engine is finally going into my experimental helicopter.
In this video, I work through the engine build-up and installation on my Composite FX XE 290 helicopter. The powerplant is an Inntec 800 two-stroke engine, originally based on a snowmobile engine platform, which makes this one of the more unique parts of the entire helicopter build.
I’ll walk through the install process, mounting details, fit-up challenges, and some of the work involved in getting the engine into the airframe. This is a huge milestone for the project and one step closer to seeing this helicopter come together for real.
This is an experimental aircraft project, and everything shown is for entertainment and documentation purposes only.
#ExperimentalAircraft #HelicopterBuild #CompositeFX #XE290 #HomebuiltAircraftThe Cheapest Real Helicopter You Can Actually Fly | Composite FX MosquitoThe Okayest Engineer2026-05-29 | I went to the Composite FX fly-in to check out one of the most interesting helicopters in the experimental aviation world: the Mosquito.
These tiny single-seat helicopters have developed a reputation for being some of the most affordable real helicopters you can actually own and fly. In this video, I walk around the different Composite FX / Mosquito models, talk through what makes them so unique, and get a closer look at why these machines have such a loyal following.
We’ll look at the original Mosquito concept, the XE/XEL, the larger-engine 290 variant, and the turbine-powered XET. I also talk about what makes the ultralight version different, why the floats exist, and why these helicopters continue to get so much attention from builders, pilots, and aviation nerds like me.
I’m currently building my own Composite FX XE 290 kit helicopter in my basement, so this fly-in was a great chance to see finished aircraft, talk with other builders, and get even more excited about the project.
#ExperimentalAircraft #HelicopterBuild #CompositeFX #XE290 #HomebuiltAircraftI Finally Installed the Helicopter Drivetrain | Basement Mosquito Helicopter Ep. 30The Okayest Engineer2026-05-23 | he XE290 is starting to come alive.
In this episode I install the entire drivetrain system, including the primary reduction drive, splitter gearbox, tail rotor driveshaft, and tail rotor gearbox. This is the system that transfers power from the engine all the way to the tail rotor.
What should have been a straightforward assembly turned into a lesson in alignment, fit-up, and patience—as usual.
One step closer to hearing this helicopter run for the first time.
Subscribe and follow along as I build a Composite FX XE290 helicopter in my basement workshop.
#ExperimentalAircraft #HelicopterBuild #CompositeFX #XE290 #HomebuiltAircraftThe Basement Helicopter Finally Got Interesting | Basement Mosquito Helicopter Ep. 29The Okayest Engineer2026-05-09 | This was one of the most satisfying videos to make of the entire helicopter build so far.
For once, there was almost no composite work involved. Instead, I finally got to start assembling real helicopter parts.
In this episode I install:
* Rotor mast * Control mixer * Push rods * Cyclic pitch and roll controls * Collective * Anti-rotation plate * Foot pedals
I tried to install everything as if it was going in for the final time… even though most of it still needs to come back apart for paint later.
The biggest milestone though? The rest of the kit finally arrived — including the engine and rotor blades. From this point forward, this project shifts from fabrication to assembly, and honestly… it finally feels like this thing could fly sooner than later.
Thanks for following along on this ridiculous basement helicopter project.
#helicopter #experimentalaircraft #aviation #homebuiltaircraft #engineeringMaking a Windshield Fit a Helicopter (Without Screwing It Up) | Basement Mosquito Helicopter Ep. 28The Okayest Engineer2026-05-02 | This episode was one of those “simple on paper, tedious in reality” jobs.
I installed the windshield on the XE 290, starting from a rough-cut piece and slowly working it into a final fit. To make things easier (and more repeatable), I designed and 3D printed a tool to mark a consistent 0.75" offset trim line for the landing surface.
From there it was a lot of careful material removal:
Belt sander in a vise for controlled trimming Angle grinder with a sanding pad for shaping Hand finishing to clean up and polish the edges
After what felt like endless test fitting, I match drilled ~60 holes and got everything aligned. The final step was masking and painting the border black, which completely changed the look of the helicopter.
It’s a small milestone mechanically, but visually it’s a big step toward this thing actually looking like a helicopter.
Next up: Unboxing the ENGINE!It FINALLY looks like a REAL HELICOPTER | Basement Mosquito Helicopter Ep. 27The Okayest Engineer2026-04-10 | This was one of those turning point moments.
In this video I wrap up a bunch of the loose ends that have been stacking up—fabricating and bonding in several key components to finally bring everything together. I designed a custom carbon fiber bracket for the cowling by scanning the helicopter, 3D printing a mold, and laying up the part. Along the way I also bonded in the foot pedal bracket, installed additional carbon supports, and permanently joined the dash assembly.
With everything coming together, I shift into prep mode for high-build primer—getting the fuselage ready for the next major step.
And for the first time… it actually looks like a helicopter.
Seeing it fully assembled and all one color completely changed things. The vision I’ve had in my head for so long is finally starting to feel real.
All of the materials used in this build were supplied by my channel sponsor @fibreglast and I’ve linked every product I used below for anyone who wants to try a similar project.
Vacuum Bag fibreglast.com/products/stretchlon-800-bagging-film-1688Turn an idea into Carbon Fiber part in 24 hours! #3dprinting #3dscanning #carbonThe Okayest Engineer2026-03-27 | I scanned using my @Shining3DScanner einstar scanner, designed in @OnshapeInc printed on @BambuLab X1 carbon and used @fibreglast composite materials.
It’s insane how fast you can make custom carbon fiber parts with a little modern technology.Custom Helicopter Dash #aviation #helicopter #diy #mosquitoThe Okayest Engineer2026-03-25 | Making a custom dash for my Mosquito Helicopter.Carbon Fiber parts from a 3D Printed mold. #3dprinting #carbonThe Okayest Engineer2026-03-21 | ...This Is Where It All Starts Coming Together! | Basement Mosquito Helicopter Ep. 26The Okayest Engineer2026-03-20 | This is one of those milestone moments.
In this episode, I finally button up the fuselage and start getting everything ready for paint. That meant a lot of bodywork—fairing in seams, cleaning up transitions, and making the fuselage and cowling actually look like one cohesive piece.
Along the way, I also knocked out a handful of smaller (but important) jobs:
Installing the auxiliary fuel tank Finishing the radiator shroud Mounting the foot pedal bracket Cutting the control pass-through Slotting the tail boom
It’s not flashy work, but this is the stage where everything starts to feel real—and honestly, it’s a huge motivation boost.
I’ll also be heading down to the Composite FX Fly-In on April 10th–11th, so if you’ll be there, let me know!No More Side Projects. Lets Start Making Real Progress! | Basement Mosquito Helicopter Ep. 25The Okayest Engineer2026-03-07 | For some reason it feels like I'm actually making some serious progress. Its no longer a whole bunch of small side projects, it's all those sub projects making their way into the main project!
In this video the cowling gets permanently installed onto the fuselage. It's ready to be faired in and I can't wait to see what it will look like! I also tackle getting the dash mounting flanges fabricated and cut access holes.I Stopped Making “Real” Molds… and 3D Printed Them Instead | Basement Kit Helicopter Ep. 24The Okayest Engineer2026-02-21 | After spending weeks making plugs and fiberglass molds the “right” way… I decided to do the exact opposite.
What happens if you 3D print a mold, throw some carbon fiber or fiberglass at it, and just see what sticks?
In this video I test: PLA 3D printed molds PETG 3D printed molds Carbon fiber + epoxy resin Fiberglass + gelcoat + polyester resin
The results honestly surprised me.
The carbon fiber part failed the first time (because I skipped release film… lesson learned). Both molds were destroyed during demolding.
But for a fast, cheap, single-use mold?
It might actually make sense.
If you’re building composite parts and don’t want to spend weeks making traditional molds, this experiment might save you a lot of time.
All of the materials used in this build were supplied by my channel sponsor @fibreglast and I’ve linked every product I used below for anyone who wants to try a similar project.
Vacuum Bag fibreglast.com/products/stretchlon-800-bagging-film-16883D Printing every component in my helicopter fuselage. Controls, pedals, dash, seat, collective.The Okayest Engineer2026-02-04 | ...I 3D Printed My Helicopter Flight Controls | Basement Kit Helicopter Ep. 23The Okayest Engineer2026-01-23 | In this video, I design and 3D print full-scale mockups of nearly every major cockpit component in my experimental helicopter — including the instrument panel, cyclic joystick, collective mount, rudder pedals, and seat mount.
These parts are not flight hardware. They’re used as design mockups, fit-check parts, and master patterns for making composite molds. 3D printing lets me iterate quickly, validate ergonomics, and work through geometry and packaging issues before committing to permanent composite parts.
You’ll see how many versions it took to get the fit and feel right, why some designs failed, and how each iteration improved the final result. This is less about “can you fly a 3D printed part” and more about using modern tools intelligently in an experimental aircraft build.
If you’re into experimental aviation, CAD, composites, or engineering projects where iteration matters, you’re in the right place.Helicopter Carbon Seat ✅ #aviation #diy #carbonThe Okayest Engineer2026-01-22 | ...PERFECT DIY Carbon Fiber Seat | Basement Kit Helicopter Ep. 22The Okayest Engineer2025-12-20 | This is Part 3 of my carbon fiber seat build series, and this one might be my favorite yet. In this video, I walk through the entire layup process, including building the chevron, placing the core, setting up flow media, bagging, and completing the resin infusion. The seat came out with a perfect chevron pattern—exactly what I was hoping for.
Of course, no build is ever 100% perfect. The infusion came up slightly short and left a small dry spot. I show how I fixed it with a targeted mini-infusion, and the final result turned out great.
All of the materials used in this build were supplied by my channel sponsor @fibreglast and I’ve linked every product I used below for anyone who wants to try a similar project or learn more about carbon fiber infusion.
Vacuum Bag fibreglast.com/products/stretchlon-800-bagging-film-1688Mold for my custom carbon fiber seat for my helicopter #aviation #diy #experimental #helicopterThe Okayest Engineer2025-12-15 | ...Custom Carbon Helicopter Seat from start to finish. @fibreglast #helicopter #aviation #carbonThe Okayest Engineer2025-11-25 | ...Building a Carbon Helicopter Seat From Scratch (Part 1) #diy #experimental #helicopter #carbonThe Okayest Engineer2025-11-24 | ...The Cheapest & Fastest Way to Make a Perfect Plug (Carbon Seat) | Basement Kit Helicopter Ep. 20The Okayest Engineer2025-11-15 | Round two of the carbon fiber seat… because, yeah, the first one didn’t fit in the helicopter. Classic Cali moment. 😂
So in this episode, we start over from scratch — I machine a new plug out of cheap insulation foam, seal it with epoxy, smooth everything with fairing compound, and hit it with high-build primer. A few hiccups along the way (obviously), but somehow this thing turned out way better than I expected. Honestly… kind of proud of this one.
Huge shoutout to @fibreglast for sponsoring this video and sending me all the materials to make this plug. They seriously made this round go a whole lot smoother.
This is Part 1 of what will probably be a three-part series on building the new carbon fiber seat for the XE 290. Next up: making the mold. After that: the real carbon layup.
Fiberglass Cloth fibreglast.com/products/4-oz-fabric-50-inch-wide-262?_pos=3&_sid=a377db6d6&_ss=rMosquito helicopter control mixer assembly #helicopter #aviation #diy #homebuiltaircraftThe Okayest Engineer2025-10-29 | ...Were Back Baby!!! Parts are here! | Basement Kit Helicopter Build Ep. 19The Okayest Engineer2025-10-18 | Watch as I machine and assemble key helicopter controls — the mast, swash plate, control mixer, and collective stick — on my homebuilt XE 290 helicopter project!
After a long delay, I finally got more parts in and can get back to building the helicopter! In this episode, we manufacture and assemble the mast, swash plate, control mixer, and collective stick — and get it all mounted in the helicopter.
Of course, it didn’t go perfectly… I managed to smash my face in the process. 😅 Still, it feels amazing to be back in the shop, and things are starting to come together fast.
🛠️ Follow along as the XE 290 project finally starts to look like a real helicopter again!WE HAVE PARTS!!! #helicopter #homebuiltaircraft #mosquitoThe Okayest Engineer2025-09-30 | ...Never fill your coffee machine again! #coffee #coffeelover #diyThe Okayest Engineer2025-09-26 | Discover Easy, Affordable, and Reliable PCB manufacturing with JLCPCB! Register to get $70 New customer coupons: jlcpcb.com/?from=Okayest Special Deal: Get a $30 coupon for JLCPCB premium 6-layer PCBs: jlcpcb.com/6-layer-pcb?from=getcoupon
This tank topper will fit just about any coffee maker out there. Never fill your coffee machine up with water again with this automatic tank filler.NEVER fill the water tank again!!The Okayest Engineer2025-09-20 | Discover Easy, Affordable, and Reliable PCB manufacturing with JLCPCB! Register to get $70 New customer coupons: jlcpcb.com/?from=Okayest Special Deal: Get a $30 coupon for JLCPCB premium 6-layer PCBs: jlcpcb.com/6-layer-pcb?from=getcoupon
Filling the water tank is the worst part of owning a coffee or espresso machine — but what if you never had to do it again?
In this video, I design and build the Tank Topper — a DIY automatic water filler that keeps your coffee machine topped off at all times. It’s the ultimate coffee hack, fixing the most annoying part of making coffee. No more running out mid-shot, no more angry mornings, and no more wasting time refilling your espresso machine water tank.
By the end, you’ll see exactly how I designed it, how it works, and why it might just be the best coffee machine accessory you’ll ever own.
👉 Want one for yourself? Check it out here: theokayestengineer.com/product/tanktopperEvery helicopter guy at the air show! #helicopter #aviationThe Okayest Engineer2025-09-09 | ...Helicopter Build on Hold?! What’s Next + Meet CaliThe Okayest Engineer2025-07-18 | This video is a little different from my usual build updates. I wanted to take a moment to give you all an update on three big things:
1. Status of the Helicopter: Composite FX is still behind, and even after two years since placing my deposit, I still don’t have an estimate on when I’ll receive the next parts.
2. What’s Next for the Channel: I’ve got a few more composite projects for the helicopter (like the seat and dash), but since I was hoping to do more assembly first, I’m planning some fun DIY “maker” projects in the meantime that I think you’ll really enjoy!
3. Who is Cali? For those new here—or just curious—I’ll share my background as an engineer and builder, and what sparked my passion for helicopters.
Thanks for sticking with me through the delays! If you’re excited for what’s coming, hit that subscribe button and stay tuned.
@fibreglast - Please go show them some support!! website: fibreglast.comThis Okayest Idea actually WORKED! | Basement Mosquito Helicopter Build Ep. 18The Okayest Engineer2025-07-04 | After finally pulling a perfect carbon fiber part from the mold, I had to face the brutal next step: removing the original plug from the helicopter. Let's just say it didn’t go quietly—and taking a hammer to something I spent weeks perfecting nearly broke me.
Then came the real gamble: separating the carbon cowling from the integrated flange, which I may or may not have used Kevlar to “help” with. Spoiler: it didn’t fray like I expected… but it made a great depth gauge.
In the end, I got the cowling split, laid out the 1/4-turn fasteners, and got everything mounted back to the helicopter—and I couldn't be happier with how it turned out.
24.9% off FibreGlast.com Coupon Code: JULY2025
@fibreglast - Please go show them some support!! website: fibreglast.com Instagram: instagram.com/fibreglastdevelopments YouTube: youtube.com/fibreglastStart to finish! #carbonfiber #helicopter #aviationThe Okayest Engineer2025-06-28 | ...Helicopter Carbon Cowling turned out PERFECT #composites #carbonfiber #helicopter @fibreglastThe Okayest Engineer2025-06-21 | ...Carbon Fiber Cowling REVEAL – Worth the 7-Month Grind? | Basement Mosquito Helicopter Build Ep. 17The Okayest Engineer2025-06-19 | After 7 months of mold-making, sanding, and planning… it’s time to infuse the carbon fiber cowling. This is the biggest part I’ve ever attempted, and the stakes are high—there’s no do-over. Will it work? Will the mold survive? Let’s find out. Thanks for following along on this build. Let me know what you think of the final part in the comments!
I thought this would be the easy part… just prep the mold and cut some templates, right? Turns out, figuring out how to make a flange to mount the cowling to the fuselage opened up a whole can of overcomplicated worms. My first idea? Trash. My second idea? Possibly genius… possibly madness. Either way, I’m going for it — and trying to pull it off in a single layup. Let’s get weird with composites.DIY Easy-Bake Composites Oven! #carbonfiber #diy #composites #helicopterThe Okayest Engineer2025-05-10 | ...I Built a Giant Easy-Bake Oven for Carbon Fiber (Maybe Powder Coating?) | DIY Composite Curing OvenThe Okayest Engineer2025-05-10 | 🎉 FLEXIMOUNTS Brand Month is here! Don’t miss the 5.25 Brand Day Sales – up to 50% OFF + extra savings up to $100! Shop now before it’s gone: bit.ly/4lNekKq 🔥 GL1 Garage Lift (Amazon link): amzn.to/42LI2H4 Use code "FM241226" to get an extra 5%
In this episode of The Okayest Engineer, I set out to solve a very niche problem: how do you cure full-sized carbon fiber helicopter parts at home without burning your house down?
The answer? Build a giant, modular, 110V composite curing oven that fits an 8-foot-long cowling mold, can precisely control ramp rates and dwell temps, and might even get hot enough for future powder coating projects.
In this video, I’ll walk you through: ✅ Why I needed this oven in the first place ✅ The key design constraints (like safety, cost, and 110V power) ✅ A full materials and electronics breakdown ✅ The entire construction process ✅ A first test — with actual heat and no house fires!
If you like DIY builds that are a little unhinged but fully functional, subscribe for more garage-based chaos. I’ve got a helicopter to finish building — and this is just one more piece of the puzzle.
PID Controller https://a.co/d/hPFmxBz Thermocouple https://a.co/d/eTJ5ARu Relay https://a.co/d/dTW7qCd Relay Heat Sink https://a.co/d/hUkvwRV Heating Element https://a.co/d/dZxg2Fr Fan https://a.co/d/82Hxjnv Electrical Box https://a.co/d/esmj5jo R15 Insulation homedepot.com/p/Owens-Corning-15-in-x-47-in-R15-Thermafiber-Fire-and-Sound-Guard-Plus-Mineral-Wool-Insulation-Batt-1196590/319880538 Metal Flashing Metal 2X4Cowling mold FINISHED! #carbonfiber #aviation #diyThe Okayest Engineer2025-04-26 | ...Molds done... after one last sucker punch | Basement Mosquito Helicopter Build Ep. 14The Okayest Engineer2025-04-26 | Two molds went down like a dream. Gelcoat? Smooth. Fiberglass? Cooperative. But the third mold? It had other plans. My sketchy flange failed mid-layup, and someone (me) clearly forgot how mold release works. The result? A stuck-together mess and a very loud separation. Still—mission accomplished. Molds are DONE and they look awesome!
#HelicopterBuild #ExperimentalAircraft #Composites #TheOkayestEngineerHalf a Mold, Double the Lessons #carbonfiber #aviation #experimentalaircraftThe Okayest Engineer2025-04-05 | ...Half a Mold, Twice the Lessons | Basement Mosquito Helicopter Build Ep. 13The Okayest Engineer2025-04-05 | This week, I recover from the gelcoat disaster and finally get half of the mold laid up. It was a rough start, but I learned a ton—and I’m sharing those lessons at the end so you (hopefully) don’t make the same mistakes.
I also made the trip down to the Composite FX Fly-In, where I met other XE owners and builders, and got to see these helicopters in action—very motivating to say the least.
#HelicopterBuild #ExperimentalAircraft #Composites #TheOkayestEngineerComposite FX Fly-In 2025 #helicopter #experimental #aviationThe Okayest Engineer2025-04-02 | ...If at first you don’t succeed, try try again #helicopter #experimentalThe Okayest Engineer2025-03-22 | ...NEVER TRUST ChatGPT - Spoiled my Gelcoat | Basement Kit Helicopter Build Ep. 12The Okayest Engineer2025-03-22 | The bodywork on the plug is finally DONE—but the real fun is just beginning. In this episode, we dive into prepping the plug with flanges for the parting line and expanding the mold borders. I also break down the critical details of material compatibility to (hopefully) get the gelcoat to cure perfectly the first time. Everything was going smoothly… until ChatGPT botched my calculation, and the gelcoat refused to cure. Because, of course, it did.
Big upgrades for the basement workshop! After my questionable pulley system in the last video, I listened to your suggestions and picked up a hydraulic lift table to make working on the helicopter much easier. I also got an old 3D printer, designed a quick part for the lift table, and upgraded to a bigger air compressor to handle the larger parts I’m building. But just when things were going smoothly… disaster struck.
The high-build primer went on, and after a ridiculous amount of sanding, I found massive voids in the plug. Turns out, the acetone I used to clean it seeped through the fiberglass and dissolved the foam underneath—CATASTROPHIC. But I didn’t give up. I came up with a way to inject epoxy into the voids and managed to save the project. After another thick coat of primer, we’re finally back on track!
In this episode, I rethink how to lift the helicopter more efficiently, making the entire process smoother. We also lay down a layer of fiberglass over the foam plug and fuselage to reinforce it for the mold-making process. From there, it’s a whole lot of bodywork—sanding, filling, and refining—to get everything as smooth as possible.
Plus, I need your help! I’m finalizing a logo for The Okayest Engineer, and I’d love your input. Let me know what you think in the comments!
🔧 Subscribe to follow the full helicopter build 👍 Like if you enjoy the project 💬 Comment with your logo choice and feedback
#HelicopterBuild #ExperimentalAircraft #Composites #TheOkayestEngineerFiberglass is going down on the Helicopter Cowling Plug!!!The Okayest Engineer2025-02-07 | @TotalBoat #helicopter #homebuiltaircraft #aviationlovers #avgeek #aviation #aviationdaily #pilot #builtnotbought #diy #buildityourself #makermovement #carbonfiberPrepping the Cowling Plug for Fiberglass!! | Basement Kit Helicopter Build Ep. 9The Okayest Engineer2025-01-31 | Giveaway Video: youtu.be/Ugc1WRYDXGo TotalBoat 5% Discount Code: 03WHEXTEYFCA totalboat.com/theokayestengineer Patreon patreon.com/TheOkayestEngineer Discord discord.gg/Y5D8vqRyUU
We’re making serious progress on the rear cowling plug for the helicopter! 🚁
First, we protect the fuselage with a layer of blue painter's tape, then attach the foam plug and begin sanding it down to match the contour of the fuselage. The forward skirt gave us some issues, but 3D-printed parts saved the day. We also machined more foam to finish off the top section and filled in any gaps with expandable foam—and yes, I also used drywall mud (which always stirs up some controversy 😅).
This is a critical step in getting the rear cowling ready for molding and eventually making it in carbon fiber. Let me know what you think of the process and if you have any better ideas for filling those gaps!
🔥 Subscribe for more hands-on engineering builds! 🔧 Follow the journey as I build this experimental kit helicopter from scratch.