In this video I build a neat timber framed mailbox post for my house. This was a super fun project, packed with all the good stuff of woodworking, Sliding dovetails, through mortise and tenons, wedges, tusks, dowels, etc.
Affiliate links. Using these links to purchase tools helps support this channel.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmja
Mailbox of Greatness. Fun Woodworking Project.Mike Farrington2022-07-13 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I build a neat timber framed mailbox post for my house. This was a super fun project, packed with all the good stuff of woodworking, Sliding dovetails, through mortise and tenons, wedges, tusks, dowels, etc.
Affiliate links. Using these links to purchase tools helps support this channel.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaGarage Organizer and WorkbenchMike Farrington2024-04-26 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I show how I build a workbench top and a garage organizer cabinet for my garage.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaBench grinder, storage cabinet, and lots of jigs.Mike Farrington2024-04-05 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I show how I build a cabinet for my bench grinder. I also show how I install and use several useful jigs for the bench grinder.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaNo Sag Shed Doors or Carriage DoorsMike Farrington2023-10-27 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I show how I construct and install 2 pairs of carriage doors on our garden shed. My design is an attempt to create a shed door that will never sag.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmja1972 Delta Unisaw Table Saw RestorationMike Farrington2023-09-22 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I show how I breathe some new life into a 50 year old Delta Unisaw. These are really great saws that are a good value for anyone on a budget.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaSpecialty Table Saw BladesMike Farrington2023-08-25 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I share several different saw blades that I use to expand the capabilities of my table saw.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaEntry Remodel. Updated with cedar shiplap, posts, crown moldingMike Farrington2023-06-09 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I should how I go about sprucing up the entry to our home. I install some cedar posts, shiplap, crown molding, and some trim. Follow along and see how I get it done. I love renovating our home, its something I hope to show more of on this channel.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaTurning a Superb BowlMike Farrington2023-03-02 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaEdge Sander Radstoration, this thing is RadMike Farrington2023-02-10 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I show how I restore and upgrade a Rodgers Model 800 edge sander. Once done, I've setup a nice little sanding station.
Affiliate links. Using these links to purchase tools helps support this channel. Buy this shirt and be cool like me: amzn.to/3WpApRv Buy this shirt for your wife like I did: amzn.to/3w2Fpkg
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaDrill Press Mortising made easyMike Farrington2023-01-13 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I show a neat way to cut a mortise with drill press and end mill.
Affiliate links. Using these links to purchase tools helps support this channel. Buy this shirt and be cool like me: amzn.to/3WpApRv Buy this shirt for your wife like I did: amzn.to/3w2Fpkg
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaFIreplace Mantel With ShiplapMike Farrington2022-12-02 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I build a neat fireplace mantel that is installed over some vertical shiplap. I top it off with some crown molding and base molding. I show each step of the process and of course insert my really good dad jokes along the way.
Affiliate links. Using these links to purchase tools helps support this channel.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaLets build a Blanket ChestMike Farrington2022-10-28 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I build a neat blanket chest. This is a simple build, but really fun. Follow along as I show how I build it, share some tips and as always make a few unfunny jokes.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaDust collection tipsMike Farrington2022-09-09 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
Tip 19: Use 2 45 degree fittings not 1 90.Miter Saw StationMike Farrington2022-08-19 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaIndustrial pocket hole machine restoration.Mike Farrington2022-06-24 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I restore a Ritter pocket hole machine, also called a drill tub. This is a very industrial tool and its neat to see how the tool was designed and works. I have since sold this tool to a shop near me. They will make full use of its capabilities.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaBig Walnut DeskMike Farrington2022-05-27 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaDelta 16 Radial Arm Saw Restoration. Its colossal.Mike Farrington2022-04-07 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I will do a light duty restoration of a Delta RAS-16 radial arm saw. This is truly an industrial tool. I ended up buying two saws as the first one had a crack in the main casting. No worries though, since radial arm saws are out of popular favor they are super cheap. For those wondering why I added a radial arm saw to my shop, this is an experiment. I have a few ideas I'd like to give a try with this saw. If during my exploration of this tool I find anything interesting I will make additional videos.
Affiliate links. Using these links to purchase tools helps support this channel.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaWhat should this table cost? Help me figure it out.Mike Farrington2021-12-09 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I build a coffee table from a slab of walnut I randomly found at a local supplier. I also challenge you, the audience to help me price this table. I am going to tabulate all the inputs minus the extreme highs and lows. I will then list and hopefully sell the table via my website. www.MikeFarrington.com
Affiliate links. Using these links to purchase tools helps support this channel.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaMassive Monster Mortiser. The Powermatic 400 hollow chisel mortiserMike Farrington2021-12-02 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I restore a Powermatic 400 hollow chisel mortiser. It was pulled from a school closing their shop program. This is my marginal attempt at trying to save shop class.
Affiliate links. Using these links to purchase tools helps support this channel.
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaAwesome Floating Shelf with folded bevel cuts.Mike Farrington2021-10-29 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I build a slick and modern floating shelf for our office. I pull out all the super cool pro level carpentry and woodworking tips for this one. I really think it ties the room together. Let's go!
Taytools: https://lddy.no/h1jx Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmjaWorkshop HutchMike Farrington2021-10-08 | Pick up your Double Taper Sanding Disc Here. You're gonna want one of these! mikefarrington.com/dt-disc
In this video I build some much needed storage for my glorious shop, The Boardroom. I share a few cabinet making pro tips as well as a few of my thoughts on cabinets for the wood shop. I also use a few neat pieces of hardware you may not have seen as well as a couple cool jigs. Let's go!
Link to video where I used the two jigs reference in this build: youtu.be/8n2pWPy2Vz4
Affiliate links. Using these links to purchase tools helps support this channel.
Taytools: https://lddy.no/h1jx CMT 333 hinge boring jig: https://lddy.no/vmjd 8mm bits for CMT boring Jig, you'll need these: amzn.to/3uRZgAB Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmja Marking gauge: https://lddy.no/oly5
In this video I show how I build a monster sized desk for my wife and I. Both of us work from home, so we really needed a desk comfortable for two to work at. I have included lots of detail in this video and I hope you find it informative. I have a companion video of how I made the cabinet door and drawer pulls. Take a look if you are in need.
Affiliate links. Using these links to purchase tools helps support this channel. I own and paid for everything on this list. These items have worked for me and therefore I recommend them to you.
Taytools: https://lddy.no/h1jx CMT 333 hinge boring jig: https://lddy.no/vmjd 8mm bits for CMT boring Jig, you'll need these: amzn.to/3uRZgAB Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmja Marking gauge: https://lddy.no/oly5 I love this little double square: https://lddy.no/nei1
In this video I show how I build some neat cabinet handles. I use an easy to cut, yet super duper strong joint called the bridle joint. These are fairly easy to make and will spice up any project needing cabinet hardware.
Affiliate links. Using these links to purchase tools helps support this channel.
Brad point bits, I really like these bits: https://lddy.no/vmj9 My favorite all around table saw blade: https://lddy.no/olxq I love this little double square: https://lddy.no/nei1
In this video I string together a few drill press projects. First is a 4 drawer storage cabinet on casters. I show a handful or cabinet making pro tips including but not limited too; how I install drawer slides with a high level of precision. I also show how I make a sturdy fence that attaches to a simple drill press table and a neat magnetic work stop. Veering from the main focus of the video, I go over how I alter a CMT cabinet door boring jig for more awesomeness. Finally, I show two different ways to store drill bits.
Affiliate links. Using these links to purchase tools helps support this channel.
For a limited time use code CMT16BIT20 to get an extra 29% off CMT bits.
Taytools: https://lddy.no/h1jx CMT 333 hinge boring jig: https://lddy.no/vmjd 8mm bits for CMT boring Jig, you'll need these: amzn.to/3uRZgAB Magswitch: https://lddy.no/vmj5 Forstner bit set, these are pretty darn nice: https://lddy.no/vmjb Fisch Brad point bits, very high quality: https://lddy.no/vmj9 Twist bits, also very high quality: https://lddy.no/vmj8 CMT 40 general purpose saw blade: https://lddy.no/vmja Marking gauge: https://lddy.no/oly5
In this video I restore a well used, but very nice planer to like new condition. If you are a tool geek, this video is for you. I go into detail showing all the various components and what they do.
4" double square: https://lddy.no/nei1 Clamps I like, these fit in a dovetail slot or a 20mm dog hole: https://lddy.no/neht My favorite all around table saw blade: https://lddy.no/olxq I like this flip stop, I use it on my miter saw and table saw sled: http://lddy.no/oly0 Marking gauge: https://lddy.no/oly5Arts and Crafts Fireplace Mantel, stain gradeMike Farrington2020-12-10 | Get your Double Taper Sanding Disc here: mikefarrington.com/dt-disc
In this video I build an Arts and Crafts fireplace mantel. This is my second fireplace mantel video and I thought it was different enough from my last one, that it would be neat to have the two similar projects yet two totally different outcomes. I start by selecting the best looking materials for the front of the legs and move on to building the structure. I use a biscuit joiner for the joinery tasks, and I spend a good amount of time show how I build the various details that give this fireplace mantel an Arts and Crafts feel. I finish the video by showing in detail how I fit and attach the mantel to the existing fireplace. I hope you are at least moderately entertained and better yet, pick up a couple useful tips.
Affiliate links. Using these links to purchase tools helps support this channel. 4" double square: https://lddy.no/nei1 Clamps I like, these fit in a dovetail slot or a 20mm dog hole: https://lddy.no/neht My favorite all around table saw blade: https://lddy.no/olxq I like this flip stop, I use it on my miter saw and table saw sled: http://lddy.no/oly0 Marking gauge: https://lddy.no/oly5
In this video I build, paint and install a fireplace mantel. I show my various methods for building the structure. Then I dig deep into how I cut and install the various moldings, and I give a behind the scenes look at my spray finishing process. I also show a few of my favorite router bits and where I use them. Hopefully you enjoy the video.
Affiliate links. Using these links to purchase tools helps support this channel. 4" double square: https://lddy.no/nei1 Clamps I like, these fit in a dovetail slot or a 20mm dog hole: https://lddy.no/neht My favorite all around table saw blade: https://lddy.no/olxq I like this flip stop, I use it on my miter saw and table saw sled: http://lddy.no/oly0 Marking gauge: https://lddy.no/oly5
In this video I build, hang and install a pair of doors. I break out my best jig making skills and build four quick and easy jigs that make installing the hardware on a door repeatable and accurate the first time. I use some unconventional, yet easy joinery methods that may be of interest. Some call these French doors, I think thats wrong, to me French doors need glass. I think these are called double doors, or perhaps double hung doors.
Affiliate links. Using these links to purchase tools helps support this channel. 4" double square: https://lddy.no/nei1 Self centering vix bits: https://lddy.no/olxg Clamps I like, these fit in a dovetail slot or a 20mm dog hole: https://lddy.no/neht My favorite all around table saw blade: https://lddy.no/olxq I like this flip stop, I use it on my miter saw and table saw sled: http://lddy.no/oly0 Marking gauge: https://lddy.no/oly5
In this video I use my new Avid CNC to cut out 3 easy projects, a sign for my shop, a couple picture frames, and a pair of toy boxes for my kids. I am a novice CNC operator, so tackling easy projects like these has really been a great way to help improve my skills and confidence. I'd like to thank the staff at Avid for their help in getting me to a place where I can run this machine. That was no easy task. cncrouterparts.com
These are affiliate links, purchasing via these links helps support this channel. Get a free ½” 14-degree dovetail router when you buy a set of Matchfit clamps. You MUST add both items to your cart before checkout to get the free bit. Find Matchfit Clamps here: https://lddy.no/neht Find the ½” 14-degree dovetail buts here: https://lddy.no/neik Find Matchfit hardware kits here: https://lddy.no/neig This 4" double square is my new go to small measurement measuring device. Its a really great piece of kit. Find PEC 4” double squares here: https://lddy.no/nei1 Check out the finest 6” ruler on the planet here: https://lddy.no/nei6
In this video I introduce a new product I've developed and brought to market. I call it the Double Taper sanding disc. It's a sanding disc to be used in your table saw and will make sanding the edges of work pieces much easier and more accurate. It will help with glue-ups, door and face frame construction, and a multitude of other tasks in the shop. Feel free to ask questions.
This is a product I truly believe can improve your woodworking, its easy, fast, and gives very high quality results. If you enjoy my videos, purchasing a disc for your shop is a great way to help support my channel.
In this video I restore a 75 year old Delta drill press. It's very rewarding to complete a project like this. There are always challenges along the way, but its fun to overcome them, and I always have a great sense of satisfaction when I'm done. Also, its great to have a high quality tool to use as well. I am slowly working on a few other tool restorations at the moment. If you enjoyed this video, well there will be more to come.
In this video I build a pair of over arm dust collectors. I built the first one as an experiment, I liked it so much I built the second. I worked to improve the design the second time around. I am happy with the end result, both collect almost all the dust created on the top side of the blade. I hope you find this build interesting. Feel free to ask questions.
In this video I install a new to me dust collector I bought used off Craig's List. I cover the duct work installation, why I went with this particular collector, and a few tips and tricks for better dust collection. Dust collection is both an art and a science, as such its never perfect and small changes and improvements can always be made. I will try to cover changes I make to this system in future videos. This video is in no way meant to teach everything about setting up a dust collection system, I don't have anywhere close to the knowledge needed for that. It is meant to add to the collective pile of knowledge here on the Mighty YouTube. I hope you find this video either useful or mildly entertaining. Questions, comments, and feedback are welcome.
In this video I build a useful work support stand that all serious DIYers and woodworkers should have. Its a quick build, yet something that will be used in your shop for years to come.
In this video I build a few pairs of sawhorses and two pairs of torsion beams. Combined these make for a pretty good knock down, portable workbench. The main goal I was trying to achieve with this project was to create a secondary workstation for in the shop, or onsite that could be stored on a shelf.
James Krenov is the furniture maker I referred to in the video. Look him up, he is amazing and inspirational.
Visit TSO Products for the Parf Guide jig and other stuff I used in this video: tsoproducts.com
Here are a few of the tools I like to use. These are affiliate links, purchasing via these links helps support my channel. Thank you very much for your consideration.
In this video Modern Bungalow commissioned me to build a wine cabinet. Furniture making is an amazing process, to be able to transform raw materials into a fine piece of woodworking is an honor. Follow along and watch me build this super cool cabinet.
Here are a few of the tools I like to use. These are affiliate links, purchasing via these links helps support my channel. Thank you very much for your consideration.
Here are some of the items I used in this video: These are affiliate links and purchasing via these links will help support this channel.
Sharpening stones: amzn.to/2Q5NXkQ More sharpening stones: amzn.to/2Mls53L Small saw blade: amzn.to/2tB0kxA Rip blade: amzn.to/35IZH3j Ear muffs: amzn.to/2QbobM8 Super Glue: amzn.to/2saDjRT Pull Saw: amzn.to/2SetmgV Small square I like: amzn.to/2s2eS9n Drill and impact driver: amzn.to/2EImYq7Easy to build custom display cabinets, woodworking, carpentryMike Farrington2019-10-19 | In this video I show my process for building a pair of display cabinets. I use a few simple techniques to build high quality, easy to construct cabinetry. I think the end result is a sleek, modern pair of cabinets that will look good for many years. As a side benefit this method could be easily adjusted to build cabinets for TVs, audio gear, bookcases, bowling trophies, or a large collection of Beanie Babies.
Tip Jar... Patreon: patreon.com/MikeFarrington Patreon is a great way to help me produce more and better content, even a dollar or two goes a long way. Thank you.Mammoth sized carriage doors with shop made windows.Mike Farrington2019-09-19 | This video shows how I build a pair of huge carriage doors. These workshop doors turned out pretty good if I do say so myself. I considered a garage rollup door for this space but, it wouldn't have looked as elegant. Plus the garage door that was previously in this space was destroyed by our windy Colorado winters.
Tip Jar... Patreon: patreon.com/MikeFarrington Patreon is a great way to help me produce more and better content, even a dollar or two goes a long way. Thank you.Workbench Upgrades! Vise installation, jigs, and woodworking chit chatMike Farrington2019-08-05 | Thanks to Bespoke Post for sponsoring this video. New subscribers get 20% off their first box by using code MIKE20 at checkout: bspk.me/mike
In this video I upgrade my woodworking bench by installing a Lie Nielsen chain drive vise. I also talk about what the top of my bench is made out of, the finish I use as well as the construction. Lastly, I talk about a couple jigs that make woodworking and carpentry easier and more efficient and the bench. To add some icing to this woodworking cake, I sprinkle in a few pro tips.
Tip Jar... Patreon: patreon.com/MikeFarrington Patreon is a great way to help me produce more and better content, even a dollar or two goes a long way. Thank you.Wainscoting with a Modern Geometric Twist, Wall Paneling diyMike Farrington2019-07-18 | This video documents my methods for installing a decorative modern geometric wainscoting or wall paneling. This is a fairly simple and quick home improvement job relative to my normal work, but in terms of style its outside of my "normal". This made for a fun project with a neat end result. I think this is a project that a dedicated DIYer could tackle and knock out of the park to use two sports references in one sentence. I hope you find this video useful.Quick and Easy Built-in Cabinets around a fireplaceMike Farrington2019-07-11 | In this video I build a pair of cabinets to fit on either side of a fireplace.
Tip Jar... Patreon: patreon.com/MikeFarrington Patreon is a great way to help me produce more and better content, even a dollar or two goes a long way. Thank you.
Please Note: If you would like to help support this channel, please sign up for the two week trial via the above link. This is the manner by which Fine Woodworking tracks who I refer to them.A Modern Craftsman Liquor Cabinet, Fine Furniture Making, Woodworking, CarpentryMike Farrington2019-06-04 | In this video I build a liquor cabinet. I breakout all my finest woodworking skills to complete this project.
Tip Jar... Patreon: patreon.com/MikeFarrington Patreon is a great way to help me produce more and better content, even a dollar or two goes a long way. Thank you.
Please Note: If you would like to help support this channel, please sign up for the two week trial via the above link. This is the manner by which Fine Woodworking tracks who I refer to them.
www.MikeFarrington.comTour a small professional woodworking shop, The BoardroomMike Farrington2019-04-27 | Lets go on a tour of The Boardroom, a small one man professional woodworking and carpentry shop. Please feel free to ask questions.
Tip Jar... Patreon: patreon.com/MikeFarringtonWhen a Woodworker Builds a WagonMike Farrington2019-04-15 | The Shop Apprentice tuned 3. I thought it would be a good idea to break out my woodworking skills and build him a wagon that will be the envy of the known and unknown universe. Follow along and see how I get this wagon built.
Stuff and things, and junk that I like.... De-Sta-Co Clamps on tenon and taper jig: amzn.to/2ChqOFM Osmo, I like this finish: amzn.to/2NZ9ryk Cost effective, but good T bevel: amzn.to/2u35EXF My favorite small square: amzn.to/2VVOY05 Very nice folding pull saw: amzn.to/2F6B99o Different very nice folding pull saw: amzn.to/2XVPPQ3 Everyone needs some earmuffs: amzn.to/2XT5csJ Blue dust collection hose over table saw: amzn.to/2HsImSZ Micro Jig clamps: amzn.to/2VUcGcZ Polyurethane glue: amzn.to/2O1LvdQ Titebond 3: amzn.to/2F7rorINursery Remodel, With Built In Cabinet and Window Seat, DIYMike Farrington2019-02-19 | In this video I remove the early 90s from this bedroom and turn it into a bright and fun nursery. Its a girl so we went with a pink accent wall and a pink window seat cushion.
My favorite paint rollers, expensive yes, but I wash and reuse them: amzn.to/2U1ijpyKumiko With Triangular Gridwork, Japanese woodworkingMike Farrington2019-02-07 | In this video I show how I create two Kumiko panels with a triangular gridwork using a custom table saw sled. This video parallels my article in Fine Woodworking #274.
Please Note: If you would like to help support this channel, please sign up for the two week trial via the above link. This is the manner by which Fine Woodworking tracks who I refer to them.