Iago MotaThe original project file for this video has been recovered, and is freely available at: patreon.com/posts/48930456 And, thanks to ClusterFunk, a good approximation of the .blend is also available for free at: patreon.com/posts/40685471 In both posts, the project files are attachments (bottom left corner of the posts).
Music: Lightless Dawn ⓒ - Kevin MacLeod
Hello, everyone. In this video, I will show you how to create the smoke-like particle simulation from the beginning.
The only software necessary is Blender 2.7 or higher. I did some additional compositing not shown in the video with Adobe After Effects (glow and color correction), but it is completely possible to do the same in Blender.
It is important to note, that due to the complexity of the materials, the shading process will not be explained in the video.
Blender particle simulation tutorial: Smoke Flow & ParticlesIago Mota2017-01-05 | The original project file for this video has been recovered, and is freely available at: patreon.com/posts/48930456 And, thanks to ClusterFunk, a good approximation of the .blend is also available for free at: patreon.com/posts/40685471 In both posts, the project files are attachments (bottom left corner of the posts).
Music: Lightless Dawn ⓒ - Kevin MacLeod
Hello, everyone. In this video, I will show you how to create the smoke-like particle simulation from the beginning.
The only software necessary is Blender 2.7 or higher. I did some additional compositing not shown in the video with Adobe After Effects (glow and color correction), but it is completely possible to do the same in Blender.
It is important to note, that due to the complexity of the materials, the shading process will not be explained in the video.
Patreon: patreon.com/IagoMotaBlender 3D | (Advanced) Particle workflowIago Mota2021-06-16 | UPDATE: To make the textures follow the particles, when they're emitted all at once, you can literally just use a texture coordinate node in the shading (enable "From Instancer") and use the Generated coordinates for a proper 3D texture. No need to go through this confusing process of creating gradients! If the particles are being emitted in a stream, and you want 3D texture coordinates there, then it might still be useful to use the particle "Index" for the Z-axis, but outside of that, the "Texture Coordinates" node has everything you need!
Hello, everyone! In this video, I'll be quickly going through my general workflow when creating complex particle setups in Blender. It's a much more advanced video than I usually make; and will skip over a lot of information. However, a few interesting tips and techniques will be explained in a bit more detail: attaching 3d texture coordinates to moving particles, emitting particles from other particles, and turning particles into force fields (this last one, however, doesn't appear in the final simulation).
Music used: DELOS - Trace Decay BETTOGH - Another World Aries Beats - Stranger Things
--- 00:00 Introduction 00:24 (faking) Particle texture coordinates (UPDATE in description!) 03:30 Particles from particles 04:50 Turning particles into force fields 05:40 Reference analysis 07:06 (hyper-summarized) Creating a dumb emitter :p 04:42 First particle system 09:34 Prepping the texture coordinates (1st sim) 10:37 Adding some turbulence 11:09 Particle trails! (primary + secondary systems) 16:14 Prepping texture coordinates (3rd sim) 18:03 Previewing the progress 18:36 (hyper-summarized) Liquid simulation 20:19 Fluid-Flow force fields! 22:01 (hyper-summarized) Shading 28:51 Rendering talk 29:57 Conclusion 30:21 Thank you! (+ Ending) ---
My current PC specs (I recommend better than these): 16 Gb of RAM Processor: Intel® Core™ i7-3770 @ 3.40 GHz Graphics card: Nvidia GeForce GTX 650 Ti Keep in mind that parts of this video are sped up, so this is not a good reference for the performance of my computer.Looping Smoke-sims in Blender | Quick Tip on SimulationsIago Mota2020-12-12 | Project files (Files only work properly in 2.91): patreon.com/posts/44944126
In this video, I'll go over one way to seamlessly loop a smoke simulation in Blender 2.9. I'll use OpenVDB to create the effect, meaning that there's no need to render it out and loop it in post. Keep in mind, though, that this is a more technically involved method. So, although it allows for more control and versatility, it's tougher to work with, much slower to render, and more likely to lead to technical issues and bugs. Some of these hurdles will also be addressed in this video.
This video took me a bit longer to make than I anticipated, so I'm sorry about that! This time, I decided to avoid making a more comprehensive tutorial, as Mantaflow is still going through some notable bug fixes and changes. Instead, I opted for something more "futureproof". OpenVDB allows for much easier control over the simulation. Before, I had to use collection instances to be able to duplicate smoke simulations across a scene, with no control over their timing and with max tolerance for bugs and crashes. There are still plenty of big problems with the implementation of OpenVDB in Blender (different attributes for a base smoke simulation than for one with "Noise" enabled, for instance), but, it's still a major upgrade.
My current PC specs (I recommend better than these): 16 Gb of RAM Processor: Intel® Core™ i7-3770 @ 3.40 GHz Graphics card: Nvidia GeForce GTX 650 Ti Keep in mind that parts of this video are sped up, so this is not a good reference for the performance of my computer.Blender Explosions: How I make themIago Mota2020-05-02 | Project files: patreon.com/posts/36626880 Hello, everybody! In this video, I will explain my process of creating an explosion in Blender. I will be describing the value of references, the behavior of different types of emitters, along with clarifying my intentions throughout the process of creating a smoke simulation. I will be using a manageable explosion as a practical example.
CG explosions are one of those things that seem a lot easier than they are. There's a lot of work that goes into just getting the basic shape to look appealing and to move realistically. I'm not by any means an expert on the topic; however, the information I'll present here has helped me get better results quite consistently.
Unfortunately, I wasn't able to explain the technical side of CG explosions. Although I was excited to make a proper introduction to all the features in the new Mantaflow engine, it has just too many bugs and things to change. And due to all the upcoming fixes, a more technical version of this tutorial would likely become obsolete in a few months. Due to this, I decided to focus more on the thought process.
My current PC specs (I recommend better than these): 16 Gb of RAM Intel® Core™ i7-3770 CPU @ 3.40 GHz Nvidia GeForce GTX 650 Ti GPUMaking a CG Explosion while rambling like a buffoon | DRS #2Iago Mota2019-08-10 | THIS VIDEO IS NOT A TUTORIAL I feel like I need to make this disclaimer, as the start of the video didn't make it very clear. My apologies for that.
In this video, I go through what, to me, is a standard form of developing an explosion in Blender. I start the video with a very simple emitter, ground, and domain setup and work up from there. Throughout the video, I attempt to fix existing problems and try to make the simulation as appealing and realistic as possible.4 Ways of Adding Detail to Smoke/Fire in BlenderIago Mota2018-07-29 | Hello, everyone! In this video, I will quickly explain 4 methods of adding detail to smoke simulations in Blender. Here, I will provide short descriptions of how the features utilized function, along with how to use some of them.
The purpose of this video is to present the importance of some of Blender's features when simulating detailed smoke. Please consider, that here I will only display short summaries of the different methods used. Some of those methods, such as textures and particles, are very expandable, however, and can be used in a variety of forms.
Anyway, I hope you enjoy the video!Blender Tutorial: Create a Sci-Fi Blast of ParticlesIago Mota2018-05-21 | Patreon: patreon.com/IagoMota
Hello, everyone! In this (really long) video, I will demonstrate, as quickly as possible, how to create a simulation similar to what I made in my previous video: youtube.com/watch?v=7CWkNMxwGzA
Here, I will go over the modeling of the emitters, initial smoke simulations, particle simulations, shading, and compositing. For the last two, I decided to skim over them, as they involve hours of work, and I wanted to make the video as short as possible. If you want to see a more calm and precise explanation of the shading, then I recommend this video that I previously made: youtube.com/watch?v=TMf20LXc-nw&t=
First of all, a big apology: I promised on making 20 simulations, however, I wasn't very proud of some of the earlier ones, so I ended up making new simulations which took much longer to simulate and render, and I ended up going past the deadline that I've given myself.
But anyway, this video includes eleven different renders, each composed of multiple particle/smoke simulations. With each of these simulations, I attempted on making "sci-fi energy blast" like things. The render times varied from an entire animation taking 5 hours to render, and some taking almost a week to finish.
The whole project took me half a year to complete, which is funny, considering that the final video was only half a minute long.
I used After Effects to composite all the different render passes together, color correction and lens flares. The rest (animating, simulating, rendering, etc.) was all done in Blender.
If you want to see each individual particle simulation without the lens flares or the compositing breakdown (I'm not sure why, considering each video is around 1 second in length), I have made this playlist: youtube.com/playlist?list=PLk0Y-r3c7gHewrpM1SQk3rWjdN2pckoJt
Unfortunately, YouTube's compression lowered the quality of the particles significantly. I don't think there's anything I can do to make each particle more distinguishable.
My current PC specs (I recommend better than these): 16 Gb of RAM Intel® Core™ i7-3770 CPU @ 3.40 GHz Nvidia GeForce GTX 650 Ti GPU
Anyway, I hope you enjoyed this video!Doing Random Stuff #1 | Shading Particles in Blender (Cycles)Iago Mota2017-10-24 | NOTE: This is not a tutorial about shading particles.
By the way, I will start to work on the first material at 2:00, and on the second material at 22:16.
This is my first try at a new video format, so the quality (especially the quality of the editing) is going to be quite low. I did this mainly as a test to see if this format works, so it's far from good quality content. Now, of course, it would be great if you left your opinions about this in the comment section.
In this video, the first episode of the series "Doing Random Stuff", I will be shading two different particle systems. The first particle system is the main one, and therefore is more vivid and bright. The second particle simulation only exists for the purpose of balancing out some of the strong red colors of the first one. It moves slower than the first one and is therefore given some more calm colors, such as blue and cyan, although, with some additional spots of red.
All of the material work was done in Blender, using the Cycles render engine. However, some of the compositing (observable in the before and after at 0:24) was done using other software.
My current computer specs:
16 Gb of RAM Intel® Core™ i7-3770 CPU @ 3.40 GHz Nvidia GeForce GTX 650 Ti GPUBlender tutorial: Complex Particle Intro | Part 3Iago Mota2017-04-15 | Music: Drone in D ⓒ - Kevin MacLeod
Patreon: patreon.com/IagoMota In this tutorial series, I will show you how to create the intro from the beginning of this video. This tutorial series (especially this third part) is directed to more advanced users.
This particular tutorial will be less of a step-by-step guide and will focus more on explaining. This is the third part of the series, and here we will go through the shading process of the particles by adding materials which will look interesting on the particles. We'll also do some very quick preparation for the final render, and finally, combine both of the scenes with the compositor.
Unfortunately, the project files are unavailable. For whatever reason, it seems that Dropbox deleted all of my files and, due to recent hard-drive problems, they're unrecoverable. I will make sure that this problem will not repeat and I will consider the possibility to manually recreate some of them. I hope you understand; thank you.
In this tutorial series, I will show you how to create the intro from the beginning of this video. This is the second part of the series, and will, therefore, have less explaining of some of the things which were addressed in the first part. In this video, we will finish the simulations by creating the quick explosion/impact which appears near the end of the intro sequence.
PC requirements: 8+ Gb of RAM 300+ Gb of HDD memory
Unfortunately, the project files are unavailable. For whatever reason, it seems that Dropbox deleted all of my files and, due to recent hard-drive problems, they're unrecoverable. I will make sure that this problem will not repeat and I will consider the possibility to manually recreate some of them. I hope you understand; thank you.
My current PC specs (I recommend better than these): 16 Gb of RAM Intel® Core™ i7-3770 CPU @ 3.40 GHz Nvidia GeForce GTX 650 Ti GPU
Rate ---Comment ---Share ---SubscribeBlender tutorial: Complex Particle Intro | Part 1Iago Mota2017-03-25 | Music: Drone in D ⓒ - Kevin MacLeod
In this tutorial series, I will show you how to create the intro from the beginning of this video. This is the first part of the series and will show the process of making the first two particle animations. In the next video, I will show you how to make the impact, where the particles collide and create a small explosion. And lastly, the third video will be shading, compositing and the preparation for the final render.
PC requirements: 8+ Gb of RAM 300+ Gb of HDD memory
Unfortunately, the project files are unavailable. For whatever reason, it seems that Dropbox deleted all of my files and, due to recent hard-drive problems, they're unrecoverable. I will make sure that this problem will not repeat and I will consider the possibility to manually recreate some of them. I hope you understand; thank you.
It is important to know that this tutorial series is directed towards more advanced blender users since it can get really confusing, especially in the upcoming parts. The next part will have less explaining on how to do certain things, such as using the Particle Instance modifier.
My current PC specs (I recommend better than these): 16 Gb of RAM Intel® Core™ i7-3770 CPU @ 3.40 GHz Nvidia GeForce GTX 650 Ti GPU
Rate ---Comment ---Share ---SubscribeBlender particle simulation tutorial: Particle Trail (advanced)Iago Mota2017-02-05 | Music: Drone in D ⓒ - Kevin MacLeod
Unfortunately, the project files are unavailable. For whatever reason, it seems that Dropbox deleted all of my files and, due to recent hard-drive problems, they're unrecoverable. I will make sure that this problem will not repeat and I will consider the possibility to manually recreate some of them. I hope you understand; thank you.
This video will demonstrate how to create a particle trail, which involves multiple particle simulations, and one smoke simulation. It is important to note, that this video is targeted at people who already understand the basics of smoke simulations and particle simulations in Blender.Blender particle simulation tutorial: Advanced shading processIago Mota2017-01-11 | Music: Drone in D ⓒ - Kevin MacLeod
Note: The shading process is rather complicated, so it is recommended that you understand how the Cycles node system works.
Unfortunately, the project files are unavailable. For whatever reason, it seems that Dropbox deleted all of my files and, due to recent hard-drive problems, they're unrecoverable. I will make sure that this problem will not repeat and I will consider the possibility to manually recreate some of them. I hope you understand; thank you.
In this video, I will show you how to make a Blender particle simulation with particle textures (which animate certain variables over the lifetime of each particle), and also how the quite complicated shading process for it is achieved.
I apologize for the banding artifacts that you may encounter throughout the video (bands that occur in the presence of gradients). I followed YouTube's recommended upload encoding settings, but they're still appearing. This might be due to bad compression or bad video processing. If you have any advice for high-quality rendering in After Effects or know about a good video compression software, I will strongly appreciate it if you leave a comment.25 Blender Particle Simulations | 4K VersionIago Mota2016-12-26 | BA thread: blenderartists.org/forum/showthread.php?412886-25-Blender-Particle-Simulations-(4K-Video)
Hello, everyone! After three months of working on this project, it's finally complete. This video shows 25 different particle simulations which were made exclusively with Blender. It is important to note, that I did not make any simulations involving hair particles since they tend to behave differently. I also didn't make any simulations involving fluid particles due to their instability.
For a short explanation of how each simulation was made and the number of the simulation, turn on captions. Pause the video if the captions are too quick. In the captions, I will not explain the materials of the particles, since that would take a lot of space, and the captions can only support so much.
Here are a few details: -Maximum resolution: 4K -3840 x 2160 -Frame rate: 60 fps (In some of the simulations, the frame rate was 30 fps due to their small length) -Software used for the simulation: Blender (exclusively) -Software used for compositing: Blender and After Effects -External plugins used: CubeSurfer addon by Jean Francois (PyroEvil) -Render engine: Cycles (exclusively) -Longest render time: 5 days -Largest sample count: 2000 samples
Hello, everyone! After three months of working on this project, it's finally complete. This video shows 25 different particle simulations which were made exclusively with Blender. It is important to note, that I did not make any simulations involving hair particles since they tend to behave differently. I also didn't make any simulations involving fluid particles due to their instability.
For a short explanation of how each simulation was made and the number of the simulation, turn on captions. Pause the video if the captions are too quick. In the captions, I will not explain the materials of the particles, since that would take a lot of space, and the captions can only support so much.
Here are a few details: -Maximum resolution: 1920 x 1080 -Frame rate: 60 fps (In some of the simulations, the frame rate was 30 fps due to their small length) -Software used for the simulation: Blender (exclusively) -Software used for compositing: Blender and After Effects -External plugins used: CubeSurfer addon by Jean Francois (PyroEvil) -Render engine: Cycles (exclusively) -Longest render time: 5 days -Largest sample count: 2000 samples
Computer specs: CPU: Intel® Core™ i7-3770 @ 3,40 GHz GPU: GeForce GTX 650 Ti OS: Microsoft Windows 10 ProBlender smoke simulation tutorial: Large-scale ExplosionIago Mota2016-11-11 | Music used: Lithium ⓒ - Kevin MacLeod
Unfortunately, the project files are unavailable. For whatever reason, it seems that Dropbox deleted all of my files and, due to recent hard-drive problems, they're unrecoverable. I will make sure that this problem will not repeat and I will consider the possibility to manually recreate some of them. I hope you understand; thank you.
In this video, I will show you how to create a realistic, large-scale explosion in Blender 2.78.
Since there are so many different ways of creating explosions in Blender, this will most likely not be the only tutorial on explosions.
Thank you for watching, and keep blendering!
Rate ---Comment ---Share ---SubscribeBlender smoke simulation tutorial: Smoke RecoloringIago Mota2016-10-11 | Unfortunately, the project files are unavailable. For whatever reason, it seems that Dropbox deleted all of my files and, due to recent hard-drive problems, they're unrecoverable. I will make sure that this problem will not repeat and I will consider the possibility to manually recreate some of them. I hope you understand; thank you.
Music: Lightless Dawn ⓒ - Kevin MacLeod
In this video, I will show you how to create a smoke simulation with two colliding smoke plumes that you see in the thumbnail and the beginning of this video.
Some time ago, I made a video with a series of different smoke simulation tests in Blender. The 16th test from that video, is what we'll be recreating in this video.
Rate ---Comment ---Share ---Subscribe20 Blender Smoke Simulations/TestsIago Mota2016-08-30 | Hello, everyone! I've decided to spend a month or two on just testing/R&D with Blender's smoke simulator. I was strongly inspired by how well other software (such as Maya and especially Houdini) handle smoke/pyro simulations, so I wanted to try my best to create something realistic or interesting involving the smoke simulator of Blender. In this video, you'll see some of my results.
By the way, here's a video for you, if you want to see some bonus tests and footage: youtube.com/watch?v=iHIs97QQwrw NOTE: It's quite short and doesn't have much content, so I decided to make it unlisted.
Hello, everyone! After over two weeks of working, I finally finished this scene. By the way, I could only spend less than an hour a day working on this scene because of school. So I got that going for me, which wasn't very nice. _________________________________________________
Rate ---Comment ---Share ---SubscribeBlue Marble -Blender Earth AnimationIago Mota2015-07-19 | My first public video! :D
How's it blendering, everyone? I finally finished the animation that i've been working on for...um... a (not so) long time. It's a quick animation of earth with multiple shots and camera angles.
To all you science fans out there (people like me), I have to say, that this is not a 100% accurate depiction of earth. But you can still post comments regarding the scientific flaws in this animation.
Technical stuff: The entire animation was rendered with cycles, sooo I think it's safe to say, that it took longer to render the whole animation than to create it.
The scene contains over 438,000 vertices and extremely heavy texture maps (the texture used on the moon is a 16k .tif image), because of that, the first shot had to be rendered in my CPU.
I had to deal with many heavy video files and images, so the folder where I stored most of the files related to this animation is around 67,3 GiB.
By the way, I also made the music you hear in the background. I couldn't find any non-copyrighted piano music that would suit this scene.