Kevin KrullFor my latest video, I'll be turning a rather tall segmented vase from Poplar stock. The vase is composed of 185 pieces (23 - eight piece rings and a bottom ring plug). The turning features the use of a steady rest that I built for my previous lathe and adapted for use on my current lathe. The vase is finished with two applications of Danish oil finish and buffed with Tripoli compound and carnauba wax.
Woodturning - Poplar Segmented VaseKevin Krull2014-12-17 | For my latest video, I'll be turning a rather tall segmented vase from Poplar stock. The vase is composed of 185 pieces (23 - eight piece rings and a bottom ring plug). The turning features the use of a steady rest that I built for my previous lathe and adapted for use on my current lathe. The vase is finished with two applications of Danish oil finish and buffed with Tripoli compound and carnauba wax.Woodturning - Wet Turning - How ToKevin Krull2015-07-03 | In this latest installment of Tips and Techniques I'll show the process I use to get near perfect success in my wet turnings.Woodturning - Motor Repair - Start CapacitorKevin Krull2015-03-31 | For this latest installment of Tips and Techniques I tackle an ill running motor. The motor was making a buzzing sound and would not rotate the piece is was turning without assistance. By researching online, I tracked the problem down to the start capacitor, so I ordered one. $7 dollars later, my lathe is up and running!Woodturning - Crotch figure blooperKevin Krull2015-03-17 | Well.... I bored my initial mounting hole for my pin jaws through the bottom of the blank instead of the top. The mounting hole went through all of the crotch figure. Go "figure"!!!Woodturning - Spalted Maple Natural Edge???Kevin Krull2015-02-20 | Spalted maple natural edge??? For this video, I planned on turning a natural edge shallow dish to complement the square dish I recently completed. That was the plan anyway!. This is the second of two turnings from the same spalted maple log that I turned the square dish from. As I was roughing the piece out, a shape evolved that led me down another path. I hope you like it. Thanks for watching.Woodturning - Spalted Maple Square DishKevin Krull2015-01-21 | Description - In this video, I turn a square dish (or plate) the easy way with no special tools... except maybe a chainsaw and a bowl gouge. The wood I'm using is a rotten maple log that's been laying around in the elements for over a year and a half.Woodturning - Segmented Pine VaseKevin Krull2014-11-06 | For this video I'll be turning a simple, elegant vase from humble pine construction stakes.Woodturning - Aspen Segmented Bowl - The Complete ProcessKevin Krull2014-09-26 | For this video I'll be showing the complete process that I use to make a simple segmented bowl. The wood that I'm using is Aspen, from a board, aka "flat-wood". The Aspen has some amazing curly figure that has to be seen, in person, to be appreciated.Woodturning - Maddys UrnKevin Krull2014-08-14 | The following video was made to honor the memory of my puppy-girl, Maddy, who passed away a year ago. This video is not meant to be a how-to or instructional video.
The urn is of segmented construction from an Aspen board and the base and finial are from Maple that is dyed. The urn is turned in two halves to allow for the placement of the container that holds Maddy's ashes. All pieces were finished with Danish Oil Finish and buffed.
Maddy was a Lab/Spaniel mix that I adopted from the Hobart Animal Shelter when she was just two months old. She was one of those special dogs that everyone enjoyed having around. A friend of mine commented after her passing that she had a gentle soul... truer words could not be spoken about Maddy. I could go on and on.... Maddy was 14 1/2 years old at the time of her passing.
One year ago I lost my best friend… my sweetheart… my puppy-girl… my Maddy. It's been a year now, and I don't hurt for my Maddy any less. Not a day goes by that I don't wake up and look at Maddy's spot on our bed and tell her "I love you sweetheart". And not a night goes by that I don't talk to her and shed a tear on her pillow. I wanted to keep Maddy's memory alive so much that I often have to remember that she's really gone. When I remember, it hurts that much more. Maddy was such a huge part of my life; now my life is so much less for having lost her.
The making of Maddy's first urn is what returned me to woodturning after an absence of about seven years. I found woodturning to be a form of therapy... allowed me to cope... an escape from being trapped inside our house where I would sit and dwell on her passing.
Sometimes our pets are so special to us that they transcend beyond merely being our pets... they're our family, our children. We watch them grow, take pride in their joys of life and hurt in their passing.
From the song "Mr. Bojangles": ...He spoke through tears of 15 years how his dog and him traveled about The dog up and died, he up and died And after 20 years he still grieves...
I miss you sweetheart... I love you MaddyWoodturning - Right Angle Sanding PlatformKevin Krull2014-07-29 | For this segment of Tips and Techniques I demonstrate how I made my right angle sanding platform out of some scrap MDF.Woodturning - 12 Sanding DiscKevin Krull2014-07-17 | For this segment of Tips and Techniques I demonstrate how I make my sanding discs out of scrap MDF and a 2x4 cutoff. I use double faced carpet tape to attach the sandpaper to the sanding disc.Woodturning - Cherry Two Tone Natural Edge BowlKevin Krull2014-07-03 | For this video, I'll be turning a two tone natural edge bowl out of cherry. Any wood with contrasting sapwood and heartwood can be used to achieve the two tone effect. For a cleaner, more modern, sophisticated look, I removed the bark and rounded over the natural edge. The piece is finished with three applications of Danish oil finish and buffed with Tripoli compound and topped with carnauba wax.Woodturning - Power Sanding ArborsKevin Krull2014-06-18 | For this segment of Tips and Techniques I'll demonstrate how I made my power sanding arbors from ordinary items that a woodturner might have laying around the shop. As with most things I make for myself, functionality trumps finish. This is just my simple way of making them and I'm sure there are better designs out there.Woodturning - Natural Edge Artistic Raised PlatterKevin Krull2014-06-06 | For this video, I'll be turning an "artistic" natural edge raised platter. I'm not sure what species of wood I'm turning; it may be Black Locust or it may be a type of Elm. This log came from a log pile so all I have to identify the species with is the log with its loosely attached bark. All of the Elm in my area has been interlocked grain and this wood is definitely not interlocked.Woodturning - Pin Oak Hollow FormKevin Krull2014-05-22 | After recently completing my first hollow form, I decided to tackle another one. This time I'm using Pin Oak (of the White Oak family). For the finish, I applied two applications of Danish Oil Finish but didn't buff the cured finish for a more natural look.Woodturning - Spalted Maple Three Sided BowlKevin Krull2014-05-09 | Spalted Maple Three Sided Bowl - For this turning, I ventured into the land of three sided bowls. This was my first attempt at such a turning, so watch as I figured this one out. Thanks for watching!Woodturning - Silver Maple Trumpet ShapeKevin Krull2014-05-02 | Another great shape to turn from green wood - the trumpet shape! This piece was turned from Silver Maple, powered dried, and finished with Danish Oil Finish.Woodturning - Power Sanding a Natural Edge BowlKevin Krull2014-04-27 | Tips and Techniques - For this segment I'll be demonstrating safe techniques for power sanding a natural edge bowl while the lathe is running.Woodturning - White Ash Hollow Form - Take 2!!!Kevin Krull2014-04-18 | During my first attempt to turn a hollow form I blew through the side of the piece. This time, armed with the insight gained from my first attempt, I will tackle the hollow form again.Woodturning - White Ash Hollow Form - Take 1?Kevin Krull2014-04-10 | For today's project, I'll be attempting to turn my first hollow form from "green" White Ash. I'll be using bowl gouges and bowl scrapers to do the hollowing.Woodturning - Silver Maple Natural Edge Winged BowlKevin Krull2014-04-03 | Woodturning - For this project, I'll be turning a natural edge winged bowl from a Silver Maple Log. The bowl is based on a Stuart Batty original design.Woodturning - Buffing a Danish Oil FinishKevin Krull2014-04-01 | For this Tips and Techniques segment I'll be demonstrating how I buff a cured Danish Oil Finish.Woodturning - Finishing with Danish Oil FinishKevin Krull2014-03-31 | Tips and Techniques - In this video, I'll be demonstrating how I apply Danish Oil Finish to my turned pieces.Woodturning - Thank You and AnnouncementKevin Krull2014-03-30 | Just a quick and sincere thank you and an announcement for my upcoming Tips and Techniques playlist - stay tuned!Woodturning - From Log to Finished Bowl in 18 hrsKevin Krull2014-03-24 | For this project, I wanted to see if I could create a finished bowl, turned from a green (wet) log, in the span of two days. The salad bowl is turned from a Black Maple log and finished with mineral oil and Howard Butcher Block Conditioner.Woodturning - Natural Edge White Ash BowlKevin Krull2014-03-15 | For this natural edge bowl, I decided to remove the bark for a different look. Before mounting the bowl blank on the lathe, I pried the bark off with a hand chisel being careful not to mar the cambium layer.Woodturning - Final Turning a Black Cherry BowlKevin Krull2014-03-13 | For this project, I'm final turning a Cherry bowl that I rough turned and allowed to dry. After I rough turned the bowl, I soaked it in denatured alcohol for 24 hrs and allowed it to dry for a week. The finishing procedure included two applications of Watco Danish Oil Finish and buffing with Tripoli buffing compound and carnauba wax.Woodturning - Osage Orange Natural Edge Bowl - Pith BowlKevin Krull2014-03-05 | From log to bowl. I'll show you how I took a roadside log and turned it into a natural edge, raised wing, bowl with the pith included. This Osage Orange bowl was turned from a green (wet) log to final wall thickness in one turning session. The piece was sanded on the lathe and finished with Watco Danish Oil Finish off the lathe. The inclusion of the pith was inspired by a video by Alan Stratton of "As Wood Turns".