LFO 1. Weekly HWJ Challenge. MC707. Korg NTS-1. Dirtywave M8. Cuttof 2025-06-08 | My take on the Weekly Hardware Jam Challenge: "LFO"Almost everything is LFOedGear:Roland MC-707: Drums, pads, leadDirtywave M8: LFOed HiHatsNTS-1: Leads.
Testing the ZIOCOM Ground Loop Isolator for the M8. Spoiler: It works perfectly. Cuttof 2025-09-02 | After following EZBOT's advice, I decided to test the ZIOCOM isolator to eliminate the annoying ground loop noise from my M8 when it's plugged in. Since the battery doesn't last long, I was stuck either using it with the noise or running it off a power bank, which I don't like doing.
🏗️ Construction. HWJ Challenge. ▶️ MC707 / M8 / J6 Cuttof 2025-08-31 | Hardware Jam Challenge: "Construction" Gear:MC-707: Perc, drums, soundsM8: Samples, bass, midi control to J6J6: SoundsAll samples from here:noiiz.com
Who knows how it ends?.... 🤘HWJ weekend challenge. ▶️MC-707 // M8 // Model:Cycles Cuttof 2025-08-25 | My entry for the HWJ weekend challenge: "The End"Gear:– MC-707: bass– M8: drums, samples, arps, pads– Model:Cycles: leads, kick, hats
Techno JAM. Every machine I own has something to tell. Cuttof 2025-08-19 | All my machines take part in this JAM.Gear:MC-707 → Percussion, ARPM8 → Bass + MIDI control → Roland J-6, Korg NTS-1Liven Ambient → drones, ARPModel:Cycles → Kick, Percussion, LeadJ-6 & NTS-1 → LeadsMiniFreak → ArpZoom MS-70CDR Stereo Chorus, Pinpong delay and reverb to Ambient
A quién esperas?. HWJ Challenge. MC-707, Liven Ambient, Model:Cycles, Minifreak Cuttof 2025-08-17 | My entry for this week’s HWJ Challenge.Not seen: Zoom MS-70CDR adding some CDR to the Liven.
Reverse or ton esrever. HWJ Challenge. Model:Cycles. M8 Cuttof 2025-08-04 | My take to the HWJ challenge: ReverseGear:M8: Reversed samplesModel:Cycles: Not reversed
Ambient (ish) tune. MC-707, Liven Ambient, Model:Cycles, Minifreak Cuttof 2025-08-02 | A little weekend jam — this time, an ambient-ish tune.Gear used:MC-707: Percussion, bass, arpsModel:Cycles: Arps and percussionLiven Ambient: Drones and FXMiniFreak: Solo leadMicroLab Mk3: Controlling Liven's volume and filtersZOOM MS-70CDR: add some CDR to Liven
Liquid Metal. HWJ Challenge. MC-707, Minifreak Cuttof 2025-07-27 | My bet for the HWJ weekly challenge: "METAL"Gear: Roland MC-707 All but "solo".Arturia Minifreak: "Solo".
Triple Chaos. MC-707. Model: Cycles Cuttof 2025-07-20 | My entry for this week's HWJ challenge. My brain just can't process triplets.Gear:MC-707: TripletsModel Cycles: No triplets
Da Box. HWJ Challenge. Roland MC-707 Cuttof 2025-07-13 | My take on the weekly HWJ challenge: just one boxThe almighty Roland MC-707
Amen or not?. MC707, M8, Minifreak. Cuttof 2025-06-22 | Here’s my take on this week’s HWJ challenge: "The Mysterious Amen Break".Gear:MC707: Pads, leads and drumsM8: Taking care of the Amen break sample, bass, and kickMinifreak: Strings
Friday the 13th HWJ Challenge. MC707, Liven Ambient, Minifreak Cuttof 2025-06-14 | My take on this week's HWJ challenge: "Friday the 13th".MC-707 on bells, Ambient doing the drones, and Minifreak on strings.
Drone 1. Liven Ambient. Dirtywave M8, Arturia Minifreak, Roland MC707 Cuttof 2025-05-25 | My take on the Hardware Jam Challenge: "DRONE"Gear used:Liven Ambient: Drones, of courseDirtywave M8: Beats and sound FXMC-707: Sequencing and beatsArturia MiniFreak: Beat sequencingThanks for tuning in!
Downtempo #20. Roland MC707. Model:Cycles.Mini Freak. Dirtywave M8 Cuttof 2024-10-19 | Having fun with my machines. Gear:MC707: Drums, bass, leads and voicesMini freak: Arp (sampled in to the M8) and leadM8: Playing sampled phrases from MFModel: Cycles: Drums and some soundsThanks for watching
Downtempo #4311. Roland MC707. Model:Cycles.Mini Freak. Dirtywave M8 Cuttof 2024-09-25 | Having fun with my machines. Improvisation over a downtempo melody.MC707: Drums and voicesMini freak: Bass, Arp (both sampled in to the M8) and leadM8: Playing phrases samples from MFModel: Cycles: DrumsThanks for watching
Techno #1312. Roland MC707, Model Cycles, Minifreak, Dirtywave M8 Cuttof 2024-09-21 | Having fun with my machines... this time an improvisation over a techno melodyRoland MC707: Drums, bass, etc.Elektron Model: Cycles: Drums and random soundsMinifreak: Lead and samples provider for the M8Dirtywave M8: Play phrase samples from the MFThanks for watching
Downtempo #7. Roland MC707 / Model:Cycles / Dirtywave M8 Cuttof 2024-09-15 | Having fun with my machinesRoland MC707: Bass, drums, etcCycles: More drumsDirtywave M8: Playing melody samples sampled from the MinifreakMinifreak: LeadThanks for watching!
Ambient #1. Roland MC707 / Elektron Model:Cycles / Arturia Minifreak Cuttof 2024-09-01 | Having fun playing a short ambient jam!Model:Cycles: PercsDirtywave M8: FXs (sampled from the Minifreak)MC 707: Bass, arps and more percsMinifreak: LeadZoom MS-70CDR: Reverb and delay (very subtle) to the mixMinilab 3: One voice from MC-707 and the FX pads
Melodic Techno #5. Roland MC707 / Dirtywave M8 / Arturia Minifreak Cuttof 2024-01-28 | Kinda videogame musicGear:Roland MC707, bass, arps and leads.Dirtywave M8: Drums sectionsMinifreak: LeadZoom 70 CRD: Reverb and Delay to Minifreak#Minifreak #MC707 #Roland #Dirtywave #M8 #dawless
Melodic Techno #4. Dirtywave M8 / Elektron Model:Cycles Cuttof 2024-01-21 | Melodic Techno with some dub tints Gear:Dirtywave M8: Voice samples mangament and drums. Model Cycles: Melody. 14 patterns chainedMC707: Only FXs#Dirtywave #Elektron #Techno #DawlessJam #hardwarejam
Melodic Techno #3. Dirtywave M8 / Elektron Model:Cycles. Dada Inn cover Cuttof 2023-12-16 | Cover. Authors: Dada Inn. moogulator.com/dadaGearM8: AllCycles: PadThanks for watching
Industrial Techno #1. Roland SH-4d / MC-707 / Elektron Model:Cylces Cuttof 2023-12-10 | Gear:MC707: Dirty bass, Leads and sound fxSH-4d: Bass, Cymball, LeadCycles: DrumsThanks for watching#DawlessJam #Roland #elektron #liveact
Melodic Downtempo #6. Roland SH-4d / MC-707 / Elektron Model:Cycles Cuttof 2023-12-10 | Gear:MC-707: Bass, Lead and PadsSH-4d: Pads, lead and some percsCycles: PercsThanks for wathching#dawless #Roland #Techno #elektron
Melodic Techno #2. Roland SH-4d / MC-707 / Elektron Model:Cycles Cuttof 2023-12-08 | Gear:SH-4d: Leads, Kick 2, Close HH, PercsMC-707: Leads, bass, pads.Cycles: Kick 1, Open HH, Snare.Thanks for watching!#dawless #Roland #MC-707 #Elektron #Techno #liveact
Drum and Bass #1. Roland SH-4d / MC-707 / Elektron Model:Cycles Cuttof 2023-12-02 | Drum and BassGear:Roland SH-4d: Bass, Leads, drones and percs. Roland MC-707: Leads and CymballModel Cycles: DrumsThanks for watching#Dawless #HardwareJam #Roland #Elektron #liveact
Melodic Downtempo #5. Roland SH-4d / Elektron Model:Cycles Cuttof 2023-11-25 | Roland SH-4d: Bass, ARP 1, psyco pads, drumsElektron Model:Cycles: Lead, ARP 2, percs#dawless #elektron #Roland #LiveTechno #SH-4d
Melodic Downtempo #4. Roland MC707 / TR-8s Elektron Model:Cycles Cuttof 2023-10-29 | Short Downtempo techno JamMC707 sequencing TR-8sCycles: Bass and perc. Thanks for watching#Dawless #Jam #MC707 #TR-8s #Elektron #cycles
Melodic Downtempo #3. Roland MC707 / TR-8s / Model: Cycles Cuttof 2023-10-11 | Spacy downtempo with acid drops.Thanks for watching!MC 707 sequencing the TR-8sModel: Cycles for some polyrithm sounds#Roland #MC-707 #Dawless #Live #Elektron #cycles
Melodic Downtempo #2, Elektron Model:Cycles. Cuttof 2023-09-16 | First Jam with an Elektron Model:Cycles. #dawlessjam #elektron #hardwarejam #technology
Melodic Downtempo #1. Roland MC 707 / TR-8s Cuttof 2023-09-15 | Dawless jam. Chillout song with Rolands mates. Thank you for stopping by #Dawless #RolandMC707 #hardwarejam
Melodic Techno #1. Roland MC-707 / TR-8s Cuttof 2023-08-05 | Melodic TechnoThanks for watching#dawless #hardwarejam #Roland #MC707 #TR-8S #Techno
No Thanks. MC 707, MPC One, Techno Jam Cuttof 2022-05-22 | #MPC #Dawless #RolandRoland and Akai are a fun team.Nanokontrol: controlling filters in MPCMicrokorg: Sending note to MC-707
Tunnel, Roland MC 707 Live Techno Jam Cuttof 2022-05-14 | Having fun with Roland MC-707Thank you for watching.#Roland #MC707 #DAWLESS
Serehya. MPC one / MC 707. Techno Jam. Cuttof 2022-04-02 | Chilling outMPC 707 vs MC - ONE #Dawless #Live #MPC #Roland
Mini Live Set (140BPM). MPC one, MC 707, TD 3. Techno Jam. Cuttof 2022-03-27 | Short Live set. Big fun! (for me) MPC One and MC 707 having a techno chat. TD 3 wants to participate too. MicroKorg playing a MC 707 soundNanokontrol, controlling MPC One.
Live Electro #332-A. MPC One. Behringer TD-3. Techno Dawless jam. Cuttof 2022-03-13 | Chilling out, improvising some leads.MPC One: Sound and Sequencing TD-3. TD-3: Trying hard to be 303MicroKorg: Midi ControllerNanoKontrol : Control, What else?#Dawless #techno #Liveset #Hardware
The Wanderer. MPC One / TD-3. Techno Jam. Cuttof 2022-03-06 | A Little jam.MPC One sending notes to Behringer TD-3. (There are no answers to those notes by TD-3, it is an unrequited love)All other sounds come from the MPC one's synth enginesMicrokorg as a midi controllerNanokontrol ONE controlling MPC ONE... (no siblings) #dawless #Roland #MPC #Liveset
Sesto 1. Akai MPC One. Lo fi Cuttof 2021-11-20 | #MPC #ONE #Nanokontrol Flipping samples !Using Korg nanokontrol 1 as a controller for the mpc effects and mute tracks
Ghibli I, Lo Fi, Akai MPC One, korg MICROarranger Cuttof 2021-10-30 | #MPC #KORG Flipping Samples with AKAI MPC ONE and improvising with the MICROarranger.
MPC One At Last. Lo fi Cuttof 2021-10-17 | #MPC #MicroArranger #SamplerFlipping samples and jamming with the MPC OneGuest starring: MicroArranger.#lofi #beatmaking
The rain is wet (MPC One / Microkorg / Micro X). Techno jam Cuttof 2021-10-11 | #MPC #Korg #Dawless #HWJSDawless techno ImprovisingMPC One: MIDI controlling Microkorg plus synth plugins and storm samples. Micro X: Lead voice. Korg nanoKey: trigger storm samples.
Dead Can Dance, Advent electric cover (Electribe + Novation Circuit) Cuttof 2019-03-09 | #Electribe #DCD #Cirquit #DeadcanDance #dawless Humble cover of "Advent" by my favorite band: Dead can Dance.Gear: Novation Cirquit: Drums, pads and arrangementsKorg Electribe: Cimbals, Hi Hat, Lead, bass and othersKaoss Pad 2: little reverb.Axiom 49: Controlling lead in ElectribeUn humilde cover de “Advent” de mi banda favorita: Dead Can Dance.Aparatos usados:Circtuit: Batería, Pads y AcompañamientosElectribe: Cimbals y Hi Hat. Lead, bajo y voces extras.Kaoss Pad 2: Algo de ReverbAxiom 49: No soporta mis nulas habilidades tecladísticas
Dawless Jam. Mini liveset. Electribe, Volca Beats, MicroX, Akai MP8X Cuttof 2015-12-13 | #Akai #Electribe #KorgMini liveset in 3 parts with some lead improvisation. Máquinas:- Korg Electribe 2- Korg Volca Beats- Akai Pro MPX 8- Korg Micro X- Korg MiniKaoss Pad 2Thanks!
Live Set 1 Electribe MX-1 and Electribe 2 Cuttof 2015-06-08 | #Electribe #korg #MX-1Live set with two generations. Recorded directly from the machines.I made some mistakes, very fun anyway!. Grabación en directo de un set, para probar las dos generaciones de Electribes.
No crees? (Waldorf Blofeld Roland MC 808 Electro Song) Cuttof 2011-12-02 | Electronic music.Gear:Ableton sequencerWaldorf Blofeld Synth soundRoland MC 808 DrumssiKaossilator sound FXMPC 500 starwars dialoges samples
Ilusion MC 808 Roland Cuttof 2011-06-11 | A reggae something song with i dont know somethingRoland MC 808
