Slider2732_
Build - Robot figure powered by water
updated
Please do consider a Like and Subscribe if you find value in my videos.
I'm trying to get to 1000 Subscribers and 3000 watch hours.
Full interview with Erik Bard on the All Things Unexplained channel:
youtube.com/watch?v=FAvGm7yZD2Y
History Channel YouTube channel:
youtube.com/@HISTORY
A step through of the repairs needed to fix the items, leading to a rewarding project result.
All items are about 10 years old. The Arduino Pro Mini was formerly heavily used, a couple of connections became broken and were fixed, but it hasn't been used for many years. The selection of single piece LED modules had never worked and I was unaware they needed to be connected a certain way around. Obvious in hindsight.
If you find any value in my videos please do consider Subscibing and watching the full video as I would like the channel to grow.
This easy to make tower reuses commonly thrown away electronics parts, to build an efficient low voltage tower and circuit.
Intended partially as an introduction to such systems, the video is aimed at those interested in them, as a how to, but also to show why introducing (salvaged) ferrite can improve small diameter designs. The circuit is a regular Slayer Exciter, as created by GBluer. It uses a 5.1K resistor, 2N2222 transistor and an LED.
It can be powered by 1 single drop of water, a dead 1.5V battery or a fresh new AA battery.
The circuit diagram is shown within the video. The build makes for an energy efficient DIY project.
This heater design is safer than others, with the candles being covered and housed within the raised edging of the pot.
The design is from desertsun02, here's the original video:
youtube.com/watch?v=AdV8zgJC5Oo
This one was built from parts around the house.
The pot was from a Summer garden plant, reused itself from a heater design from last Winter.
The sand was from our back yard.
The copper strips are from general leftover pieces from electrical experiments. Other metals can be used, gutter flashing, construction/house repair leftovers, the steel from drinks cans.
The original system was built to test whether aluminium florist type wire would work in a Joule Ringer build.
If anything, the Slayer Exciter version works better for field energy and light output. Of course, this is just my build and is not a good example of either.
To note - a ferrite stick is needed within old solder tubes to get them to work at all, and both 'tower' tubes do have one in them.
Steering, motor power, range and reliability are tested in this video.
For the most basic of RC car this one has impressed me. The range is especially good, as is the power. Steering works reliably and the setting control on the base works completely fine to make sure travel is in a straight line.
There should be no complaints on Christmas morning for anyone receiving this as a stocking stuffer gift.
Here is DIY DESI's original video:
youtube.com/watch?v=EQeCIelfEXc
My changes are:
1F supercap replaces 100F
2x 1000uH inductors replace 2x 330uH
4.7M resistor replaces 150K
1N4148 replaces 1N4007
Solar waver amorphous Vimun solar panel
Upon changing to a C1815GR, the circuit has produced very strong running from the onboard 2.7V 1F Supercapacitor.
The first run lasted for about 1/2 hour, which will be dealt with in the next video.
Changes to the original -
1000uH inductors replace 330uH inductors
1N4148 diode replaces the 1N4007 original
2.7V 1F Supercap replaces 100F supercap
Take a look at his original video here:
youtube.com/watch?v=EQeCIelfEXc
Many thanks to Wildchurch for the idea.
Check out his channel, for electro-mechanical marvels, homemade music and electronics creations in finely crafted cases - youtube.com/@wildchurch
The system is built around DMAME, the DOS version of the MAME emulator. My own code is used for the menu system, written in QBASIC, which allows scrolling through 23 games, all held on a 32mb Compact Flash card.
VGA output from the 1999 PC motherboard goes to a flatscreen early 2000's monitor. Sound is from an ISA Soundblaster AWE32.
As it turned out, likely the RAM and soundcard connectors needed to be cleaned, but the processor was probably the original reason for not booting. That could well have been caused by storage conditions!
There are 23 games because that's how many actual arcade PCB's I have in boxes that are vertically orientated. Have got several boxes of them, bought back in the early 2000's when such boards could be bought on Ebay at 2am for a couple of dollars. An interesting series might be to check those boards out and fix any that don't work... let me know in the comments section.
Also let me know if anyone reads these descriptions? :)
All components seen are available from Hamspiced:
github.com/hamspiced
Leaning Tower of Pisa picture from Pixabay - JimboChan
Sound Effect by Lazy Chill Zone from Pixabay
Images by OpenClipart-Vectors from Pixabay
Several light aircraft circled the fire for several hours.
It works using just tap water or rainwater.
A blocking oscillator with no blocking components.
Thanks to MilkywayOutcast for discovering these changes, which started a little journey into furthering his findings.
His original video is here: youtube.com/watch?v=quxhVnYojzU
The circuit is, at it's core, very similar to the one popularized by Lidmotor's 'Penny', from several years ago. A now very familiar blocking oscillator to many experimenters and the core of The Power Chip.
The Power Chip project is a battery of sorts, using multiple summed oscillators and placed in water or into the ground.:
youtube.com/watch?v=ZbX6rMZmjgE
While only a prototype, due to a transistor placement error, range is great and the circuit is able to achieve some very cool results and effects.
You can follow along with progress on the whole system at github.com/hamspiced
Links are also there for purchasing your own wireless electricity circuits and component parts.
While primarily intended for RFID applications, this system is exciting for moving wireless electricity further along, in a professionally made direction.
There has been some confusion regarding what is, exactly as people have thought, a battery. The system sums multiple circuits, which are all in the same electrolyte and uses only 1 positive electrode.
If you would like to help with the project, my PayPal address is:
slider2732@protonmail.com
Drawing of Baghdad battery: Ironie, CC BY-SA 2.5 via Wikimedia Commons
Whoosh Sound Effect by pixabay.com/users/lordsonny-38439655
AI graphics from typing into Leonardo.ai
Music created at suno.com
This is a major step in development of the Power Chip invention - an energy creating power source that can float on water or be plugged into the ground.
I have zero funds for future development and would sincerely hope there is someone out there, or a company that could finance further development.
If so, and sincere gratitude to you, my PayPal is slider2732@protonmail.com, as is my email.
Various quick fire renderings of possible end designs are shown, using Leonardo.ai
The main idea, is to generate continuous power and make it available in one of three ways:
To be used onboard the device itself for lighting.
To have an indicator running light and power delivery socket on the side.
To form part of a grid power system, using no batteries, solar or other usual power source.
Many such devices could be plugged into the ground or floated on water and connected in parallel, for a scaleable power solution.
The model is a Walmart Hamilton Beach 1000W.
It's about 2 years old and recently has lost a digit per week!
What might cause such an issue?
Perhaps it's just the display being broken internally? The microwave has sat in the same place all the time we've owned it. It was bought new and has been kept clean.
Thanks for any constructive, or destructive advice!
This was an idea first seen on GrandadIsAnOldMan's channel. Here is the link to his video: youtube.com/watch?v=xKx7j-W8BBE
The motor is from a pack of 5, bought here (non affiliate): amazon.com/gp/product/B09K3NJZBX
The solar panels are rated at 5V 200mA, bought here (non affiliate):
amazon.com/gp/product/B0B51HZ9D9
All in all a fun experience and I would definitely recommend 2 of those panels on such a motor. In cloudy conditions, this little boat is able to trundle along quite well, though it does need a keel adding underneath... mind you, if tied to a tree branch or similar it may be fun to just let it do its thing however it wants. Whatever floats your boat really, for performance.
youtube.com/watch?v=P_tLhyDef1U
The idea, is to use ambient radio waves to power a device.
A further idea, is up to intercept possibly harmful EMF radiation in the home. In such a way, body exposure could be limited and the energy transformed into something useful, electrically.
Equipment used:
2x 100W solar panels - Eco-Worthy and Renogy
Eco-Worthy 30A PWM solar charge controller
Old AGM ex truck lead/acid battery of unknown power density
Ecoflow River 2 Pro power station
General Electric GTS22KYNRFS fridge/freezer
******************
Solar equipment is sought for review and consideration.
If your company would like me to advertise, review and test equipment, please contact Mark at slider2732@protonmail.com
******************
Chapters:
0:00 Introduction
1:43 Connecting the solar panels
3:19 Connecting the car battery to the power station for the first time
5:55 Connecting the system to the fridge/freezer
8:40 Conclusions
I'd no real idea of whether the system could work. It should for short term running during say a 4 hour power cut, but whether it could move permanently off-grid is completely unknown.
Equipment used:
Fridge/freezer: GE: GTS22KYNRFS
Ecoflow River 2 Pro home power station
Eco-Worthy 30A PWM solar charge controller
1x Renogy 100W solar panel
1x Eco-Worthy 100W solar panel
XT60 connectors
The Jurassic Park vehicle ran around fine on flat surfaces, but not on our gravel and grass. The decision was made to abandon putting larger, more pliable tyres on it and instead to donate the circuit to another, lighter car.
00:00 A recap on the dire performance of the truck
00:15 Introduction
02:02 beginning the repairs and conversion
02:42 Circuit removed
05:20 Testing the new circuit
05:34 Outside tests and conclusion
This project is only a bit of fun, with the aim of trying out several bits of online software. It's all very interesting nowadays what AI can do and the wish was to try it, see if it could bring a passable version of the voice to the project.
Future plans include to increase his functionality, to make him a Smart Toaster!
Repeater coils, a different crystal speed, scope shots are all in this update video.
The experiments really have been a lot of fun, expanding on a 2 pin crystal oscillator circuit from 6 years ago. Research will be ongoing, likely in the background but focused on improving power output and wireless transmitting/receiving range.
Here is Nick's Github page, where he details his experiments so far, including having the coils professionally made.
github.com/Hamspiced
Various pieces of test gear can be purchased on his Tindie store, which will also enable him to continue to develop the tech, for NFC based wireless technology.
To note - the green transmitting coil has a 100pF capacitor across it. That has helped to 'dial in' the frequency.
The end circuit should offer an ability to power NFC and RFID devices to a realistically usable range... inches not paper thickness distances.
In this video, I show the 'unboxing' of the part sent, discuss Nick's Github files resource page and show a quick demo of one of his professionally created receiving coils being powered by a 1.5V Slayer Exciter.
Several of us worked with 13.56MHz a few years ago, with Grandadsanoldman and Lidmotor especially doing fine work with 13.56MHz circuits. My intention is to carry such experiments forward and, perhaps you too have ideas to help Nick out?
A new feature for the channel is the 'Buy me a coffee?' QR code in the top right of the video. This links to my PayPal account, whereupon a safe donation can be made.
Thank you very much for your consideration of supporting my research, especially while the channel is not monetized.
Luckily, outdoors experiments areas often seen in my videos weren't included in the changes. 1 particular tree where a trailcam is often placed escaped the process.
Their idea, was that instead of returning every couple of years to trim branches, they would completely remove any trees within 15ft distance of the overhead electric wires.
Our neighbours yard looks nothing like it used to, with many trees removed.
All in all, quite the destructive re-landscaping... which I was fortunate to film, considering it was 7.30am when the tractor machine moved in.
The process was very efficient however, with the time from initial arrival to full removal of 2 trees being only half an hour. In that time, the company also redid a troublesome rain puddle area and reskimmed the top surface of our driveway. It made their job easier and left us with an improved driveway.
This circuit has proven to be just as effective as another built recently, but, uses fewer components and less power!
Those circuits and their coils are often used within making homemade pulse motors. They've been around for well over a decade and, until fairly recently, were very common in dollar stores. I've not been able to find them locally and therefore have wanted to build something with similar functionality.
This circuit fits the task, offering 1.5V operation, enables using homemade coils on bobbins and auto-starts excellently!
It should be able to be converted to solar power readily, though may need finer wound coils with a higher resistance than 50 ohms each.
#DIY
#dancing flower toy
#simple circuit
#educational
#beginner project
#electronics project
#craft project
#creative project
#fun project
#DIY toy #DIYcrafts
#electronics project.
#homemade toy
#creative toy
Instead, a back engineered pendulum circuit from Big Clive.
The original circuit needed large magnets and a change to the magnets on this motor, as found by Lidmmotor for his excellent replication.
This pendulum circuit was found through casual browsing and, with a couple of component changes fixed the non running of this pulse motor build.
Initial thoughts were that it's obviously voltage based, but, the original application was for 5V USB powerbank power and the voltage here is 1.5V from a AAA battery. The amount of turns of both coils are about the same as 5V running motors.
A bit of a headscratcher, likely solved with a diode and resistance changes, but, similar builds haven't needed such changes!
The idea, has been to remove wires from circuits, replacing it with water.
Water works very well as a ground, instead of plugging things into the Earth. So, can it be used as a wire for other circuits?
The output is reduced, but can be compensated for by turning up the volume on powered speakers.
The original Bedini SSG circuit diagram has been further tweaked.
The resistor has been removed and the diode has been replaced by an LED.
Using an LED allows viewing that the circuit is working, if the fan doesn't turn.
This USB fan broke twice, firstly the main speed control circuit popped and then when that was removed the Hall sensor on the coils board blew.
The idea here is to get it running with a modified Bedini SSG circuit.
As it all turned out, the circuit became an equally efficient 3 component solution, with comparable power draw to the old circuit. Of course, it does need to be flicked to begin running, but, the feature of this circuit is that any USB powerbank can be used, whether it has a switch on it or not. The fan draws no power when stopped.
Since making the video a week ago, it has been in daily use as a cooling fan at the PC.
Can a simple cup of water act as a ground?
These experiments are intended to further understandings (for the self and those interested) of 1 wire transmission of low power.
2x Tesla bifilar pancake coils are being used, with the one underneath receiving wireless energy from the one above. The single transmission wire is then connected to the lower one and runs 576ft across the property.
The power source for these tests is a 5V USB powerbank and the current draw is approx 20mA.
Operating frequency is ~200KHz
Trailcams don't use enough power to stay on when they are in detecting modes, adding such a circuit ensures enough of a draw to do so. The circuit works by drawing more than the powerbank minimum for a brief time at a settable interval and is much more efficient than adding a constant draw load.
2 days and nights from the $1 USB powerbank is more than adequate for uses around here... allowing checking up on the locally seen creatures. Also great for repurposing old powerbanks that otherwise would stay unused in a drawer.
Two circuits were studied for this 'keep alive' circuit.
The first is here: audiosciencereview.com/forum/index.php?threads/powerbank-keep-alive-to-power-low-current-5v-devices.4065
The other has LED's on it to show when it's running - ideal for setting the time gap, because powerbanks may switch off at 5 seconds to up to 30 seconds:
youtube.com/watch?v=fHCnblxkbwI
What I have done, is to use the Graham Haughton second circuit, but remove the whole transistor and LED's section, replacing with a 33ohm resistor from the first circuit.
*****
Product reviews accepted
Particularly solar power stations, batteries, panels etc.
Also home security related products, such as cameras and trailcams.
Contact Mark at slider2732@protonmail.com
*****
This Nikola Tesla based system of 1 wire transmission allows for sending power down just 1 wire, ending in a connection to the load and usually a metal rod into the ground.
In these experiments, I attempt to transmit further than my personal best distance, to use no rod in the ground and do it all by only using a USB 5V powerbank as the power supply.
*****
Product review requests accepted
Especially solar power stations, panels and related.
Contact Mark at Slider2732@protonmail.com
*****
The Tesla pancake BAC coil is made from 24 turns of coax cable. It is wired much like a Joule Thief, but with no LED in the circuit.
Transistor is a 2N3055
2.2K resistor to the Base
As a point of soil conditions reference, there have been some heavy rains recently. The last 3 days prior to the experiments however were 90F+ with full sun. The soil is a mere 1ft deep at most, with sandstone bedrock underneath.
********
Commercial product reviews accepted.
Especially solar power related equipment, such as power stations, panels, LFP batteries.
Contact Mark at slider2732@protonmail.com
********
Instead, 1000uH inductors are used here to see if they can work in a similar way.
I'd used such inductors in many Joule Thief type of low power energy projects, but, as far as I can recall not without an LED directly wired on the circuit.
1 wire transmission is also possible, a great finding!
Being vintage, it's expected to have some issues develop over time, but this was a crazy set of odd effects and it needed attention.
The time would circulate around quickly, it would stop at random times, literally.
It's buttons would work and then not work.
I dive into the internals to sort it out, clean it up and hopefully fix all the problems.
#repair #fix #vintage #vintageclock
The concept, is to transmit power from a 100W solar panel, wirelessly into the house via a window.
Several such transmitter and receiver coils could be positioned on house windows, to enable power access points for power.
By using the DC-DC converter circuits, each power point could be set to whatever voltage is needed, between 3V and 36V DC.
This could be useful at rented locations, air BnB, etc. Also where electrical lines would normally have to run between rooms.
The sending and receiving coils are matched bifilar Tesla pancake coils, made from old telephone line cables. Making those coils was shown in Part 2 of this video series:
youtube.com/watch?v=qgTHlwMhyWI
The LM2596 modules can be found at places such as Amazon, for around $2 each:
amazon.com/s?k=LM2596&crid=1KFOWMJFWFE5X&sprefix=lm2596+%2Caps%2C409&ref=nb_sb_noss_2
To which, I've added a small readout screen, to show the voltage output:
amazon.com/gp/product/B0BG31FBX5
'Approved' vector art from Vecteezy.com
****
Solar and electronics related product reviews will certainly be considered.
Contact Mark, at Slider2732@protonmail.com
****
#solar #wirelesspower #transmit #invention
Let's open it up, check it out and see if it can be repaired.
It used to be on the Power Cube, a homebuilt solar system for low wattage mains powered devices (rotary tool, 8W LED light etc). As such, power demands have always been low. But, on a 90F/30C day it looks like it overheated.
Moving the new capacitors to the outside of the case defeats a common issue, of manufacturers putting them next to heatsinks. I've fixed a TV and other devices by simply moving new capacitors away and they've remained trouble free for years afterwards.
The inverter will have a fan blowing over it for future use, to make sure the new caps don't suffer from the same problem.
*********
For product reviews, please contact Mark at Slider2732@protonmail.com
Solar equipment of good quality would be of mutual interest and be featured regularly on the channel
*********
A lot is still new to us, having moved to the 5 acre property in mid 2022. A well would be very useful for watering plants, especially in areas far away from the house. An idea would be to use solar to power anything found.
Imagine the surprise on discovering why an area of grass is always wet... we can''t mow it or even walk through it without sturdy footwear. Could it be oil?
We're only a few miles from the El Dorado oil field at the bottom of Arkansas.
Mostly, there is a worry of lake contamination. I've often seen crud (or crude) floating on the surface, gathering in one corner. Removal has resulted in oil soaked light sheets and rags when skimming the water surface. The thinking had been of the previous owner doing oil changes on vehicles and it seeping through the soil. Am not so sure now.
Then, what of the weird structure found in the woods?
Off camera, I took a look at the intertwined branches and found that a central one was a Mimosa tree, alive and well, adding a really good support to what should just be a fallen tree. As such, it can hold it up without rotting. My wife has since been out there to see it and agrees it doesn't look 'right', with the top end being firmly in the ground.
We've seen quite a few Bigfoot/Sasquatch videos but haven't seen something like this structure. What do they build, if they exist?
Still, it's at least intriguing as to how such a thing could have formed. The Creature of Boggy Creek was filmed West of us.
Finally, the real actual electric well. I'd presumed it to be something to do with gas, there having been a trailer house in that area up to around 2016. But the thick yellow wires suggest instead a water well. I'm presuming 220V and AC, because of the same yellow colour of each wire.
Any insights?
The whole idea is to allow for portable systems to be used when staying at a rented/AirBnB/vacation house/other places where drilling a hole in the wall or otherwise changing a property isn't an option.
Also, the use of multiple smaller systems to provide wireless electricity 'sockets' via windows on a house. Plug the device into the coil that's receiving energy via the window and power it, with no wires.
Everything has had to be stalled, due to lack of parts.
****************************
If your company would like a product review video to be made, please contact Mark at
slider2732@proton.me
Particularly solar related, battery, inverter, solar panels and other related items.
Any item employed for extended use will be featured regularly on the channel and positively commented upon during such use.
****************************


