Wired AND Logic Explained | What is Wired Logic in Digital Electronics ? ALL ABOUT ELECTRONICS 2026-09-29 | Wired AND Logic Explained | What is Wired Logic in Digital Electronics ?
BCD Ripple Counter (with Simulation) | Ripple Counter as Frequency Divider | Cascading of Counters ALL ABOUT ELECTRONICS 2022-12-05 | In this video, the design and working of the BCD Ripple Counter and MOD 5 Ripple Counter have been explained with simulation results. Apart from that, how the ripple counter works as a frequency divider is explained using examples. And at the end, how by cascading multiple ripple counters, we can design a ripple counter of higher modulus is also explained with simulation results.The following topics are covered in the videos:0:00 Introduction1:10 MOD 5 Ripple Counter (with simulation)8:10 BCD Ripple Counter (with Simulation)17:22 Ripple Counter as Frequency Divider19:53 Cascading of Ripple CountersIn this video, the general procedure for designing the Ripple Counter of any modulus is explained by taking the example of MOD 5 Ripple counter and BCD Ripple Counters. After the design the simulation results of each counters are also shown.Apart from that, during the decoding the output of the counter, how the glitches in the output can be avoided using the strobing is also explained using the simulation.After the discussion of MOD 5 and BCD Ripple Counters, how the Ripple Counters in general acts as a frequency divider is explained using couple of examples. And at the end, how to design a Ripple Counters of higher modulus by cascading multiple Ripple Counters is also explained using the simulation.The link for the other useful videos and playlist:1) Introduction to Counters:youtu.be/AKe2T5BkI1U2) Asynchronous Counters:youtu.be/fyagSrWSWbc3) Universal Shift Registers:youtu.be/JbtqyvLu67c4) Digital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKafl5) Analog Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBVM18VZ7JKW-q88FAtnr8_This video will be helpful to all the students of science and engineering in understanding the design and working of BCD Ripple Counters and MOD 5 Ripple Counters. And how Ripple Counters acts as a frequency divider.#allaboutelectronics #digitalelectronics #sequentialcircuits #counters Support the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Asynchronous Counters (Ripple Counters) Explained | Binary Up/Down Ripple Counters ALL ABOUT ELECTRONICS 2022-11-28 | In this video, Binary Up/Down Ripple Counters (working, circuit diagram and Timing diagram) has been explained in detail.The following topics have been covered in the video:0:00 Introduction1:14 2-bit Up/Down Ripple Counters (using negative edge triggered FFs)9:44 2-bit Up/Down Ripple Counters (using positive edge triggered FFs)13:33 Ripple Counters using D Flip-Flops and T Flip-Flops15:22 3-bit and 4-bit Ripple CountersCheck this playlist for more videos on Digital Electronics, youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflAsynchronous Counters:In Asynchronous counters, only one flip-flop in the counter circuit receives the clock, and the output of that flip-flop is connected to the clock input of the next flip-flop. The flip-flop which receives the external clock input represents the LSB of the count, and the Flip-flop which receives the clock input at the last in the sequence represents the MSB of the count. The asynchronous counters also known as the Ripple Counters. The counters which counts in the binary number sequence are known as Binary Counters.In this video, the circuit diagram, working and the timing diagram of binary up/down Ripple Counters have been explained in detail. This video will be helpful to all the students of science and engineering in understanding the Binary Up/Down Ripple Counters. #allaboutelectronics #digitalelectronics #sequentialcircuits Support the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
ALL ABOUT ELECTRONICS Live Stream ALL ABOUT ELECTRONICS 2022-11-20 | This video will be helpful to all the students of science and engineering in understanding the Frequency Division Multiplexing (FDM) technique. #ALLABOUTELECTRONICSSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Introduction to Counters | Types of Counters | Application of Counters ALL ABOUT ELECTRONICS 2022-11-20 | In this video the basics of the counter, types of counters, the application of counters and what is modulus of counter is explained.the following topics are covered in the video:0:00 What is Counter?1:45 Binary Counters3:10 Modulus of Counter4:51 Application of Counters6:55 Types of CounterFor videos on Digital Electronics, check this playlist:bit.ly/31gBwMaWhat is Counter ?The Counter is sequential circuit which counts the number of times the specific event has been occurred. The input to the counter is applied in the form of digital input pulses. The counter counts the high to low or low to high transition of the input pulses and accordingly it increments its count. Internally, it is the interconnection of the Flip-Flops.Modulus of the Counter:The number of different output states through which counter goes before returning back to its first state is known as the modulus of the counter. For N-bit Counter, the maximum possible value of the modulus is 2^N - 1.The modulus of the counter can be less than the maximum possible value.E.g BCD counter is MOD-10 Counter. (Although it is 4-bit counter)Types of Counter:1. Asynchronous Counter2. Synchronous CounterApplications of Counter:1. Counting2. Time Measurement3. Frequency Division4. Analog to Digital Converters#allaboutelectronics #digitalelectronics #sequentialcircuits #counters Support the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Binary Sequence Generator using Shift Register (with Simulation) | Digital Electronics ALL ABOUT ELECTRONICS 2022-11-16 | In this video, how to design the binary sequence or pattern generator (using the shift register ) is explained with examples.0:00 Introduction2:19 Example 19:06 Example 2More videos related to Shift Register:1) What is Shift Register? Types of Shift Registers: youtu.be/bAQfPQqKCHs2) Serial In Serial Out (SISO) Shift Register:youtu.be/r4bfEqZNSyo3) What is universal Shift Register ?youtu.be/JbtqyvLu67c4) Applications of Shift Register:youtu.be/xwafUfsqHGABinary Sequence Generator using Shift Register:Using the combinational circuit in the feedback of the shift register, it is possible to generate the specific pattern of the desired length. To design the sequence generator one can follow these steps:1) Find the required number of Flip-Flops2) Write the sequence in a tabular form for each Flip-Flop output3) Check whether the output state of the Flip-Flop is not repeating during the sequence4) If any output state of the Flip-Flop is appearing more than once, then add one more flip-flop and repeat step-2, until you find all unique output states.5) The output of the Flip-Flops (Q0, Q1, Q2 etc) will be the input to the combinational circuit. Find the output of the combinational circuit (F) in terms of Q0, Q1 and Q2 etc from the table.6) Using the K-map, find the simplified expression.7) From the simplified expression, select the logic circuit for the feedback.This video will be useful to all the students of science and engineering for understanding how to design the sequence generator using the shift register.#allaboutelectronics #sequentialcircuits #digitalelectronics Support the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
What is Pull up Resistor and Pull Down Resistor ? How to select the pull-up resistor value ? ALL ABOUT ELECTRONICS 2022-11-07 | In this video, what is pull-up and pull-down resistor and how to select the value of pull-up resistor for specific application has been explained in detail (using the calculations).The following topics are covered in the video:0:00 What is Pull-up and Pull-down Resistor ?5:20 Applications of Pull-up Resistor8:57 How to select the pull-up resistor value for specific application ?The link for the other useful videos:1) What is Buffer and Tri-State Buffer ?youtu.be/VKU9ciJb5u42) Difference between Latch and Flip-Flop ?youtu.be/LTtuYeSmJ2gWhat is Pull-up and Pull-down resistor ?The pull-up resistor pulls up the voltage of the digital pin to logic HIGH and it prevents it from the floating condition (when the pin is interfaced with a switch).The pull-up resistors are often used with the open collector gates and open collector ICs and they are important part of the I2C protocol. The pull-down resistor works exactly opposite to the pull-up resistor. It pulls down the voltage of the digital pin to logic LOW and prevents it from the floating condition.While using these pull-up and pull-down resistor in any circuit, the selection of the proper value of the resistor is also very important.In this video, how to select the value of pull-up resistor for the specific application is explained using the calculations.This video will be helpful to all the students of science and engineering in understanding the pull-up and pull-down resistors and how to select the pull-up resistor for the specific application.#ALLABOUTELECTRONICS#PullupResistor#ElectronicsBasicSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Applications of Shift Register | Ring Counter and Johnson Counter, PRBS Generator ALL ABOUT ELECTRONICS 2022-10-25 | In this video, the different applications of the shift registers have been explained in detail.Apart from the storage, the shift registers are used in many different applications. here is the list of some applications.1) Delay Generation2) Serial to Parallel and Parallel to Serial Conversion3) Sequence Detection4) Sequence Generation5) Designing Ring and Johnson Counter6) PRBS generation 7) Arithmetic Operation (Multiplication and Division)In this video, all these different applications of the shift registers have been explained in detail. Link for the other useful videos related to Shift Registers:1) What is Register?youtu.be/bAQfPQqKCHs2) Shift Register: SISO Shift Registeryoutu.be/r4bfEqZNSyo3) Shift Register: SIPO, PISO and PIPO Shift Registeryoutu.be/r4bfEqZNSyo4) Universal Shift Register:youtu.be/JbtqyvLu67cFor more information, please check the timestamps:Timestamps:0:00 Generating a Time Delay1:36 Serial to Parallel and Parallel to Serial Conversion3:24 Sequence Detection4:47 Ring Counter and Johnson Counter12:28 Sequence Generation14:28 Pseudo Random Binary Sequence Generation (PRBS Generator)18:25 Arithmetic Operations This video will be helpful to all the students of science and engineering in understanding the applications of shift register. #allaboutelectronics #shiftregister #digitalelectronics #sequentialcircuits Support the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Shift Register: SIPO, PISO and PIPO Shift Registers | What is Universal Shift Register? ALL ABOUT ELECTRONICS 2022-10-09 | In this video, Serial In Parallel OUT (SIPO), Parallel In Serial OUT (PISO) and Parallel IN Parallel OUT (PIPO) Shift registers are explained. And at the later part of the video, the working of the Universal Shift Register is also explained. The following topics are covered in the video:0:00 Introduction0:40 Serial IN Parallel OUT Shift Register (SIPO)5:44 Parallel IN Serial OUT Shift Register (PISO)10:58 Parallel IN Parallel OUT Shift Register (PIPO)11:50 Universal Shift RegisterSerial In Serial OUT Shift Register (SISO):youtu.be/r4bfEqZNSyoFor videos on Digital Electronics check this playlist:bit.ly/31gBwMaFor more videos on Analog Electronics, check this playlist:bit.ly/3QtqdnNSerial In Parallel OUT Shift Register (SIPO):In this register, the data is shifted in the register serially, but it is taken out parallelly. Parallel In Serial OUT Shift Register (PISO): In this register, the data is loaded parallelly in the shift register, but it moved out serially. Parallel In Parallel OUT Shift Register (PIPO):In this register, the data is loaded parallelly in the shift register, and it is also taken out parallelly.Universal Shift Register:The universal shift register has shift right, shift left and parallel load capability. Depending on the two selection line, it can be used in any one of the 4 modes. In this video, the different modes of the Universal Shift Registers are explained using the diagram. This video will be helpful to all the students of science and engineering in understanding the different types of shift register . #allaboutelectronics #digitalelectronics #shiftregister #sequentialcircuits Support the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
What is Buffer ? Why Buffer and Tri-State Buffers are used in Digital Circuits ? ALL ABOUT ELECTRONICS 2022-10-02 | In this video, the basics of the buffer and Tri-state buffer have been explained, and the applications of Buffer and Tri-state buffer in digital circuits are also explained. The following topics are covered in the video:0:00 What is Digital Buffer?0:51 Why Buffers are used in Digital Circuits?3:15 What is Tri-State Buffer?6:20 Applications of Tri-State Buffer9:06 Bi-Directional Tri-State BufferFor videos on Digital Electronics, check this playlist:bit.ly/31gBwMaFor more videos on Analog Electronics, check this playlist:bit.ly/3QtqdnNWhat is Buffer?Buffer is a Logic gate, whose output is the same as the input. It has a high current driving capability. It is typically used in digital circuits when one wants to drive the low impedance load or to increase the circuit's fanout.What is Tri-State Buffer?It is the buffer with two inputs. The Data Input and Control Input.The control input decides whether the input will reach to the output or not.When the control input is high then the Tri-State buffer acts as a normal buffer. And when the control input is low then it operates in Hi-Z mode. In this mode, the buffer provides high impedance and it isolates the output from the input side.This buffer has three output states, logic '1', logic '0', and Hi-Z mode. Since it has three output states, so it is known as the Tri-State Buffer or Three State Buffer.This video will be helpful to all the students of science and engineering in understanding what is buffer and Tri-State buffer, and why they are used in digital circuits. #allaboutelectronicsquiz #digitalelectronics #logicgates Support the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Shift Register : Serial In Serial Out (SISO) Register Explained | Bidirectional Shift Register ALL ABOUT ELECTRONICS 2022-09-25 | In this video, the design and working of Serial In Serial out (SISO) shift register is explained. And at the later part of the video, the bidirectional shift register is also explained. The following topics are covered in the video:0:00 Introduction1:08 Design and Working of Shift Right Shift Register12:09 Shift Left Shift Register13:05 Bidirectional Shift RegisterThe link for the other useful videos related to Digital Electronics:1) Digital Electronics (Playlist):bit.ly/31gBwMa2) Shift Register:youtu.be/bAQfPQqKCHs3) D Flip-Flop:youtu.be/EILb-DrYr8A4) Multiplexer:youtu.be/aQlF-9i3fAASerial In Serial Out (SISO) Shift Register:In this type of shift register, the data is moved to the register serially and it is also taken out serially. Depending on the direction in which the data is moving, there are two types of SISO registers.1) Shift Right Shift Register2) Shift Left Shift RegisterIn Shift Right Shift Register, the data inside the register is moving from left to right. The input is applied to the MSB of the Register, and the output is taken at the LSB of the register.In this video, the design and working of the shift right shift register is explained in detail.In Shift Left Shift Register, the data inside the register is moving from right to left. The input is applied to the LSB of the register and the output is taken at the MSB of the register.In general, for n-bit SISO register, to load the n-bit data, n clock pulses are required and to move out the same data, n-1 clock pulses are required. Bidirectional Shift Register:The Shift Register, which can shift the data in both left and right direction is known as the Bidirectional Shift Register.This video will be helpful to all the students of science and engineering in understanding the design and working of Serial In Serial Out (SISO) shift register and Bidirectional Shift Register . #allaboutelectronicsquiz #digitalelectronics #sequentialcircuits #shiftregister Support the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Introduction to Registers | What is Shift Register? Types of Shift Registers ALL ABOUT ELECTRONICS 2022-09-17 | In this video, the basic design of the Registers is explained in detail. At the later part of the video, the Shift Register and the types of the Shift Registers are also explained. The following topics are covered in the video:0:00 What is Register ?1:12 Basic Design of 4 bit Register (with LOAD and CLEAR inputs)7:10 What is Shift Register ? Types of Shift RegistersLink for the other useful videos/ Playlist:1) Digital Electronics (Playlist):bit.ly/31gBwMa2) Analog Electronics (Playlist):bit.ly/3QtqdnN3) JK Flip-Flop:youtu.be/LOPHyHOMcLI4) Master Slave JK Flip-Flop:youtu.be/XgRmLl9uRfIWhat is Register:Register is a group of Flip-Flops which shares the common clock and can store n-bit of binary data. What is Shift Register:A register capable of shifting the binary information between the neighbouring Flip-Flops in the selected direction is known as the Shift Register.Types of Shift Registers:Depending on how the data is loaded in the Shift Register and how the data is accessed from the Shift Register, there are four types of Shift Registers.1) Serial IN Serial OUT (SISO)2) Serial IN Parallel OUT (SIPO)3) Parallel IN Serial OUT (PISO)4) Parallel IN Parallel OUT (PIPO)Applications of Shift Registers:1) Data Storage2) Arithmetic Operations3) Providing Time Delay4) Serial to Parallel Data Conversion5) Parallel to Serial Data ConversionThis video will be helpful to all the students of science and engineering in understanding what is Registers in Digital Circuits, the basic design of Registers and Types of Shift Registers. #allaboutelectronics #ShiftRegister#digitalelectronics #sequentialcircuits Support the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
PRESET and CLEAR inputs in Flip-Flop | Asynchronous inputs in Flip-Flop ALL ABOUT ELECTRONICS 2022-09-08 | This video explains what is PRESET and CLEAR inputs in the flip-flop circuit. In this video, the behaviour of the flip-flop with the PRESET and CLEAR input is explained using the truth table. And at the later part of the video, the flip-flop circuit with PRESET and CLEAR input is also explained. The following topics are covered in the video:0:00 What is Synchronous Input ?1:10 Asynchronous Inputs (PRESET and CLEAR)5:22 Logic Circuit of Flip-Flop with PRESET and CLEAR inputs10:52 Why Flip-Flop requires Asynchronous inputThe link for other useful videos / Playlist:1) Digital Electronics (Playlist):bit.ly/31gBwMa2) Analog Electronics (Playlist):bit.ly/3QtqdnN3) Network Analysis (Playlist):bit.ly/3RLgESjThis video will be helpful to all the students of science and engineering in understanding what is PRESET and CLEAR inputs in Flip-Flop. #allaboutelectronics #digitalelectronics #sequentialcircuits Support the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
T to SR Flip Flop, T to JK Flip Flop and T to D Flip Flop Conversion | Flip-Flop Conversion ALL ABOUT ELECTRONICS 2022-08-31 | This video explains T to SR Flip-Flop Conversion, T to JK Flip-Flop conversion, and T to D Flip-Flop Conversions. Check these other valuable videos related to Digital Electronics:1) T Flip-Flopyoutu.be/hw2rWOlg9x42) Karnaugh Map (K-map):youtu.be/lw1STgKUpW03) JK to SR Flip-Flop, JK to D Flip-Flop, and JK to T Flip-Flop Conversion:youtu.be/bl77FRTAXWA4) SR to JK Flip-Flop, SR to D Flip-Flop, and SR to T Flip-Flop Conversion:youtu.be/PMJ09EwvnF05) D to SR Flip-Flop, D to JK Flip-Flop, and D to T Flip-Flop Conversionyoutu.be/zEHoFrGYwdAThis video will be helpful to all the students of science and engineering in understanding the T to SR, T to JK, and T to D Flip-Flop Conversion. Chapters:0:00 Introduction 0:50 T to SR Flip-Flop Conversion5:31 T to JK Flip-Flop Conversion9:16 T to D Flip-Flop Conversion#ALLABOUTELECTRONICS#digitalelectronics#SequentialCircuitsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
D to SR Flip Flop, D to JK Flip-Flop, and D to T Flip-Flop Conversion | Flip-Flop Conversion ALL ABOUT ELECTRONICS 2022-08-27 | This video explains D to SR Flip-Flop Conversion, D to JK Flip-Flop conversion, and D to T Flip-Flop Conversions. Check these other valuable videos related to Digital Electronics:1) SOP and POS form | Minterms and Maxtermsyoutu.be/YmKmS9bpMqM2) Karnaugh Map (K-map):youtu.be/lw1STgKUpW03) JK to SR Flip-Flop, JK to D Flip-Flop, and JK to T Flip-Flop Conversion:youtu.be/bl77FRTAXWA4) SR to JK Flip-Flop, SR to D Flip-Flop, and SR to T Flip-Flop Conversion:youtu.be/PMJ09EwvnF0This video will be helpful to all the students of science and engineering in understanding the D to SR, D to JK, and D to T Flip-Flop Conversion. Chapters:0:00 Introduction 0:50 D to SR Flip-Flop Conversion4:41 D to JK Flip-Flop Conversion8:11 D to T Flip-Flop Conversion#ALLABOUTELECTRONICS#digitalelectronics#SequentialCircuitsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
JK to SR Flip Flop, JK to D Flip-Flop and JK to T Flip-Flop Conversion | Flip-Flop Conversion ALL ABOUT ELECTRONICS 2022-08-20 | This video explains JK to SR Flip-Flop Conversion, JK to D Flip-Flop conversion, and JK to T Flip-Flop Conversions. Check these other useful videos related to Digital Electronics:1) SOP and POS form | Minterms and Maxtermsyoutu.be/YmKmS9bpMqM2) Karnaugh Map (K-map):youtu.be/lw1STgKUpW03) SR Flip-Flop:youtu.be/CiS7N2C8-Ik4) JK Flip-Flop:youtu.be/LOPHyHOMcLIThis video will be helpful to all the students of science and engineering in understanding the JK to JK, JK to D, and JK to T Flip-Flop Conversion. Chapters:0:00 Introduction 0:54 JK to SR Flip-Flop Conversion5:34 JK to D Flip-Flop Conversion8:51 JK to T Flip-Flop Conversion#ALLABOUTELECTRONICS#digitalelectronics#SequentialCircuitsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
SR to JK Flip Flop, SR to D Flip-Flop and SR to T Flip-Flop Conversion | Flip-Flop Conversion ALL ABOUT ELECTRONICS 2022-08-15 | This video explains SR to JK Flip-Flop Conversion, SR to D Flip-Flop conversion, and SR to T Flip-Flop Conversions. Check these other useful videos related to Digital Electronics:1) SOP and POS form | Minterms and Maxtermsyoutu.be/YmKmS9bpMqM2) Karnaugh Map (K-map):youtu.be/lw1STgKUpW03) SR Flip-Flop:youtu.be/CiS7N2C8-Ik4) JK Flip-Flop:youtu.be/LOPHyHOMcLIThis video will be helpful to all the students of science and engineering in understanding the SR to JK, SR to D, and SR to T Flip-Flop Conversion. Chapters:0:00 Introduction to Flip-Flop Conversion2:46 SR to JK Flip-Flop Conversion10:29 SR to D Flip-Flop Conversion13:18 SR to T Flip-Flop Conversion#ALLABOUTELECTRONICS#digitalelectronics#SequentialCircuitsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Setup Time and Hold Time of Flip Flop Explained | Digital Electronics ALL ABOUT ELECTRONICS 2022-08-08 | In this video, what is the setup time, hold time, and propagation delay of the flip-flop are explained using the example. The following topics are covered in the video:0:00 Introduction0:30 Rise Time and Fall Time2:28 Setup Time and Hold Time4:17 Propagation Delay of Flip-Flop6:10 Effect of Flip-Flop timings on the Sequential Circuit13:15 ExampleDigital Electronics (Playlist):bit.ly/31gBwMaWhat is Rise Time and Fall Time:Rise time is the time required by the signal to reach from 10 % to 90% of the signal amplitude.Fall time is the time required by the signal to reach from 90 % to 10 % of the signal amplitude.Setup Time and Hold Time:Setup time is the time duration up to which the input signal to the flip-flop should remain stable before the arrival of the clock edge.Hold time is the time duration up to which the input signal to the flip-flop should remain stable after the arrival of the clock edge.Propagation Delay:It is the time delay after the clock edge after which the output of the flip-flop will change based on the input signal.In this video, different flip-flop timings are explained using the waveform and how this timings decides the maximum operating clock frequency of the sequential circuit is explained using examples.This video will be helpful to all the students of science and engineering in understanding the different flip-flop timings like setup time, hold time and propagation delay. #ALLABOUTELECTRONICS#digitalelectronics #sequentialcircuit #Setuptime#HoldtimeSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Master Slave JK Flip-Flop Explained | Digital Electronics ALL ABOUT ELECTRONICS 2022-07-23 | In this video, the Circuit Diagram and working of the Master-Slave JK Flip-Flop are explained in detail (using a timing diagram). The following topics are covered in the video:0:00 Race Around Condition in JK Flip-Flop1:52 Circuit Diagram of Master-Slave JK Flip-Flop3:47 Working of Master-Slave JK Flip-Flop15:04 Master Slave D Flip-Flop and SR Flip-FlopMaster-Slave Flip-Flop Notes:allaboutelectronics.org/master-slave-flip-flop-explainedThe link for the related videos:1) JK Flip-Flop:youtu.be/LOPHyHOMcLI2) SR Flip-Flop:youtu.be/CiS7N2C8-Ik3) SR Latch and Gated SR Latch:youtu.be/xONsaRVYQmA4) T Flip-Flop:youtu.be/hw2rWOlg9x45) D Flip-Flop:youtu.be/EILb-DrYr8AThe Master-Slave JK Flip-Flop:The Master-Slave JK flip-flop consists of two gated SR latches. One latch acts as a master latch, while the other acts as a slave latch. The J and K inputs are applied to the master latch. Apart from that, the outputs of the Slave latches are connected back to the master latch to use the SR latch as the JK latch. In this Master-Slave Flip-Flop, the clock signal is directly applied to the master latch and it is connected to the slave latch via an inverter (NOT gate). Therefore, at a time only one latch is active. In the master-slave configuration, during the ON time of the clock, the master responds to the input. And during the OFF time of the clock, the slave latch follows the master output. Since at a time, only one latch is active, this configuration avoids the race around condition, which is typically seen in the JK Flip-Flop.In this video, the working of the master-slave JK flip-flop is explained using the timing diagram.This video will be helpful to all the students of science and engineering in understanding the Master-Slave Flip-Flop. #ALLABOUTELECTRONICS#DigitalElectronics#SequentialCircuitsSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
T Flip-Flop Explained | Circuit Diagram, Excitation Table and Characteristic Equation ALL ABOUT ELECTRONICS 2022-07-09 | In this video, the T Flip-Flop is explained in detail. In this video, the working of the T Flip-Flop is explained using the logic circuit. The excitation table and the characteristic equation of the T Flip-Flop are also discussed. The following topics are covered in the video:0:00 Truth Table of T Flip-Flop2:14 Characteristic Equation of T Flip-Flop4:14 Excitation Table of T Flip-Flop5:38 Circuit Diagram and Working of T Flip-FlopFor notes, check this link:bit.ly/3nS6lPlT Flip-Flop:In the T Flip-Flop, when its input is 0, then it holds the current state of the Flip-Flop. And when its input is 1 then its output toggles. Since its output toggles when T=1, it is known as toggle flip-flop.For more videos on Digital Electronics, check this playlist:bit.ly/31gBwMaOther useful videos related to Flip-Flops:1) SR Flip-Flop:youtu.be/CiS7N2C8-Ik2) D Flip-Flop:youtu.be/EILb-DrYr8A3) Latch and Flip-Flop:youtu.be/LTtuYeSmJ2g4) JK Flip-Flop:youtu.be/LOPHyHOMcLIThis video will be helpful to all the students of science and engineering in understanding the T Flip-Flop. #allaboutelectronics #digitalelectronics #sequentialcircuits Support the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
JK Flip-Flop Explained | Excitation Table and Characteristic Equation of JK Flip Flop ALL ABOUT ELECTRONICS 2022-07-03 | In this video, the JK Flip-Flop is explained in detail. In this video, the working of the JK Flip-Flop is explained using the logic circuit. And the excitation table and the characteristic equation of the JK Flip-Flop are also derived. The following topics are covered in this video:0:00 Introduction1:41 Working and the Logic Circuit of the JK Flip-Flop8:51 Characteristic Equation of JK Flip-Flop12:07 Excitation Table of JK Flip-Flop16:43 Timing Diagram of JK Flip Flop18:05 Race Around Condition in JK Flip FlopFor notes, check this link:bit.ly/3cna9FPFor more videos on Digital Electronics, check this playlist:bit.ly/31gBwMaOther useful videos related to Flip-Flops:1) SR Flip-Flop:youtu.be/CiS7N2C8-Ik2) D Flip-Flop:youtu.be/EILb-DrYr8A3) Latch and Flip-Flop:youtu.be/LTtuYeSmJ2gThis video will be helpful to all the students of science and engineering in understanding the JK Flip-Flop. #ALLABOUTELECTRONICS#digitalelectronics#jkflipflop Support the channel through a membership program and also get additional perks:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
D Flip-Flop Explained | Truth Table and Excitation Table of D Flip-Flop ALL ABOUT ELECTRONICS 2022-06-25 | In this video, the truth table, the excitation table, and the characteristic equation of the D Flip-Flop are explained. And at the later part of the video, the logic circuit of D Latch, Gated D latch, and D Flip-flop is also presented. The following topics are covered in the video:0:00 Introduction0:52 Truth Table of D Flip-Flop3:27 Timing Diagram of D Flip-Flop6:20 Characteristic Equation of D Flip-Flop8:05 Excitation Table of D Flip-Flop9:17 Logic Circuit of D Latch, Gated D latch, and D Flip-FlopD Flip-Flop:In the D Flip-Flop, the output of the flip-flop is the same as the input. If the input is 0 then the next state of the flip-flop will be 0 and if the input is 1 then the next state will be 1. The D-Flip Flop captures the input data at every clock transition and it holds that until the next clock transition. It is used in many sequential circuits like data registers and counters.In this video, the truth table, logic circuit, the excitation table, and the characteristic equation of the D flip-flop are explained in detail.This video will be helpful to all the students of science and engineering in understanding the D Flip-Flop. #allaboutelectronics #digitalelectronics #sequentialcircuit Support the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
SR Flip Flop Explained | Truth Table and Characteristic Equation of SR Flip Flop ALL ABOUT ELECTRONICS 2022-06-19 | In this video, the working of the positive and the negative edge-triggered SR Flip-Flop is explained using its truth table and the timing diagram. And the characteristic equation of the SR flip-Flop is also derived at the later part of the video. The following topics are covered in the video:0:00 Why Flip-Flop is preferred over a Latch in Sequential Circuits6:00 Positive Edge Triggered SR Flip-Flop (Symbol, Truth Table, Timing Diagram)11:33 Negative Edge Triggered SR Flip-Flop (Symbol, Truth Table, Timing Diagram)13:13 Characteristic Equation and Characteristic Table of SR Flip-Flop18:12 Pulse Transition Detector for Flip-FlopFor more info, check these other useful videos:1) Latch and Flip-Flop Explainedyoutu.be/LTtuYeSmJ2g2) SR Latch and Gated SR Latchyoutu.be/xONsaRVYQmA3) Introduction to Sequential Circuits:youtu.be/fLN1YOmuAr84) Digital Electronics (Playlist):bit.ly/31gBwMaLink for the Multisim Simulation :bit.ly/3tGWBuLSR Flip-Flop:In this video, first, the importance of Flip-Flop over the latch in the Sequential Circuits is explained using one example.And then the working of the positive and the negative edge-triggered SR flip-flops are explained using the truth table and the timing diagram.The characteristic Equation of the SR Flip-Flop:The characteristic equation of the Flip-Flop shows the output of the flip-flop in terms of the present state and the inputs.For SR Flip-Flop if Qn is the present state and, S and R are the inputs, then the next state of the Flip-Flop (Q n+1) can be given asQ n+1 = S + R' QnIn this video, the characteristic equation of the SR flip-flop is derived, and in the later part of the video, the pulse transition detection circuit for the Flip-Flop is also discussed. This video will be useful to all the students of science and engineering in understanding the working of the SR Flip-Flop. #ALLABOUTELECTRONICS#digitalelectronics#SequentialCircuit#FlipFlopSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
SR Latch and Gated SR Latch Explained | SR Latch using NOR gates and NAND gates ALL ABOUT ELECTRONICS 2022-06-05 | In this video, the design and working of the SR latch and the Gated SR latch are explained in detail. In the video, the design of the SR Latch using the NOR Gates and NAND Gates is explained, and how this Latch responds to the different input combinations of S and R is also explained in detail.The following topics are covered during the video:0:00 Design of Basic Memory Element using Logic Gates3:30 SR Latch using NOR Gates (Logic Circuit, working and Truth Table)11:18 SR Latch using NAND Gates (Logic Circuit, working and Truth Table)16:18 Gated SR Latch19:14 Gated SR Latch using NAND Gates23:50 Gated SR Latch Timing DiagramThe link for the other useful videos:1) Latch and Flip-Flop:youtu.be/LTtuYeSmJ2g2) Introduction to Sequential Circuits:youtu.be/fLN1YOmuAr83) Digital Electronics (Playlist)bit.ly/31gBwMaSR Latch:The SR latch has two inputs (SET and RESET) for setting and resetting the 1-bit of information. And it has two complementary outputs Q and Q'.When S is 1 and R is 0 then latch Sets the output to logic '1'.When S is 0 and R is 1 then latch Resets the output to logic '0'.And when both S and R inputs are 0 then latch retain the currently stored information.In the active high SR latch, S = 1 and R = 1 input combination is forbidden. In this video, the SR latch is designed using NOR gates and NAND gates. And the working of the latch is explained for the different input combinations. Gated SR Latch:The normal SR latch is transparent, because it immediately responds to the change in input . But the Gated SR latch has control / enable input. When this enable input is high, then only it becomes transparent to the inputs. In this video, the design of Gated SR latch using the NOR gates and NAND gates is explained. And its working is explained using the timing diagram.This video will be helpful to all the students of science and engineering in understanding the Design and working of SR Latch and Gated SR Latch. #allaboutelectronics #digitalelectronics #SRLatch#RSLatchSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Latch and Flip-Flop Explained | Difference between the Latch and Flip-Flop ALL ABOUT ELECTRONICS 2022-05-28 | This video explains the difference between the Latch and the Flip-Flop.The following topics are covered in the video:0:00 Introduction1:01 What is Latch? What is Gated Latch?4:52 What is Flip-Flop? Difference between the latch and flip-flopThe link for the other useful videos:1) What is Sequential Circuit?youtu.be/fLN1YOmuAr82) Digital Electronics (Playlist):bit.ly/31gBwMaLatch and Flip-FlopThe latch and flip-flop are the basic memory element that stores 1-bit ( 0 or 1) of information.Since the output of these memory elements has two stable states ( 0 or 1), they are also known as a bi-stable multivibrator.Difference Between Latch and Flip-Flop:The Latch is a level-sensitive memory element. It responds to the input level change immediately. sometimes it is also known as a transparent latch (because it responds to the change in input immediately)The transparent latch with the control input / enable input is known as the Gated Latch. This type of latch becomes transparent when the enable input is high. Although Latch behaves as an Asynchronous memory element, it can be used as a Synchronous memory element by applying the periodic clock signal at the control / enable input.In this case, still it is level sensitive. Because it responds to the change in the input when the clock signal / enable input is high. And in this way, it is sensitive to the clock signal level.The flip-flop is an edge-sensitive memory element. It responds to the input at the clock transitions.If the flip-flop responds to the input at the rising edge of the clock then it is called a positive edge-triggered flip-flop. And if the flip-flop responds at the falling edge of the clock then it is called a negative edge-triggered flip-flop.In this video, the difference between the latch and flip-flop is explained using the timing diagram.This video will be helpful to all the students of science and engineering in understanding what is Latch and Flip-Flop, and what is the difference between Latch and Flip-flop. #ALLABOUTELECTRONICS#Latch#FlipFlop#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Introduction to Sequential Circuits | Digital Electronics ALL ABOUT ELECTRONICS 2022-05-23 | In this video, the basics of the Sequential Circuit have been explained.By watching this video, you will learn the following topics.0:00 What is Sequential Circuit?3:33 Block Diagram of Sequential Circuit5:43 Asynchronous Sequential Circuit6:42 Synchronous Sequential Circuit7:33 What is a clock signal? The basic terminologies related to the clock signal9:55 Edge Triggered and Level Triggered Sequential CircuitsFor more info, check this Digital Electronics Playlist:bit.ly/31gBwMaWhat is Sequential Circuit?The Sequential Circuit is a type of digital circuit where the output of the circuit depends on the current inputs, as well as the past sequence of inputs. And since the output depends on the past inputs, this Sequential Circuit also has a memory element.In this video, the block diagram of the Sequential Circuit has been explained using the example.Types of Sequential Circuits:There are two types of Sequential Circuits1) Synchronous Sequential Circuits2) Asynchronous Sequential CircuitsAsynchronous Sequential Circuits:The Asynchronous Sequential Circuits respond to the change in the input immediately.In these circuits, the memory element within the circuit responds to the change in the input immediately.Synchronous Sequential Circuits:In these circuits, the memory element within the circuit responds to change in the input only at the discrete-time intervals. The output state of the memory element changes as per the clock signal.The Synchronous Sequential Circuits can be further classified into two types:1) Edge Triggered 2) Level TriggeredLevel Triggered Sequential Circuits:In these circuits, the memory element within the circuit responds to the input, when the clock level goes high. (or low). These circuits are sensitive to the clock level.Edge Triggered Sequential Circuits:In these circuits, the memory element within the circuit responds to the input during the clock transition. (At the rising or the falling edge of the clock signal)In this video, the basics of the Sequential Circuit and its different aspects are explained in detail.This video will be helpful to all the students of science and engineering in understanding the basics of the Sequential Circuits. #ALLABOUTELECTRONICS#SequentialCircuits#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Priority Encoder Explained (with Simulation) | 4 to 2 Priority Encoder | 8 to 3 Priority Encoder ALL ABOUT ELECTRONICS 2022-05-13 | In this video, the Priority Encoder and its working is explained in detail.The following topics are covered in this video:0:00 Limitations of Binary Encoder1:06 4 to 2 Priority Encoder (Working, Truth Table, and Logic Circuit)7:59 8 to 3 Priority Encoder (Working, Truth Table, and Logic Circuit)17:53 Simulation of 8 to 3 Priority Encoder19:19 8 to 3 Priority Encoder using 4 to 2 Priority Encoders26:50 Simulation ResultThe link for the other useful videos:1) Encoder youtu.be/NWiPVMDh7GE2) Decoderyoutu.be/a3wh7xV5PBU3) Multiplexeryoutu.be/aQlF-9i3fAA4) Demultiplexeryoutu.be/eeWHM3zzK3M5) Digital Electronics (Playlist)bit.ly/31gBwMa74148 Datasheet:bit.ly/3ywkcRVPriority Encoder:In Priority Encoder, unlike the normal Binary Encoder, each input has assigned a priority. When more than one inputs are high, then the encoder gives the output corresponding to the input which has a higher priority. In this video, the working of 4 to 2 and, 8 to 3 Priority Encoder is explained using the truth table. And based on the truth table, how to design the logic circuit of the Priority Encoder is also explained in detail.Finally, with the help of the Simulation of the Logic Circuit (of 8 to 3 Priority Encoder), the working is explained. This video will be helpful to all the students of science and engineering in understanding the Priority Encoder. #ALLABOUTELECTRONICS#PriorityEncoder#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Encoder in Digital Electronics | Working, Application and Logic Circuit of Encoder ALL ABOUT ELECTRONICS 2022-05-01 | In this video, the Binary Encoder circuit is explained in detail. This video explains the working, the applications, the logic circuit of the Encoder, and the limitations of the normal binary encoder. By watching this video, you will learn the following topics:0:00 What is Encoder?1:02 4 to 2 Encoder2:38 8 to 3 Encoder (Octal to Binary Encoder)4:40 Applications of Enocder6:46 Decimal to BCD Encoder9:01 Limitations of Encoder11:43 Introduction to Priority EncoderThe link for the other useful videos:1) Decoder:youtu.be/a3wh7xV5PBU2) Multiplexer:youtu.be/aQlF-9i3fAA3) Digital Electronics (Playlist):bit.ly/31gBwMaWhat is Binary Encoder:The binary encoder is the combinational circuit which converts the input binary information into the compact binary code. The Encoder has N outputs and 2^N or fewer inputs. Its working is exactly opposite to the Decoder. For the normal binary encoder, it has been assumed that only one input is high at any given time. And depending on the particular high input, the. the Encoder generates the N-bit code at the output.Depending on the number of inputs and output we have different types of Encoders.4 Line to 2 Line Encoder, 8 to 3 Encoder (Octal to Binary Encoder) are the few examples of the Binary Encoder.Limitations of Binary Encoder:1) If more than one inputs are high then the output of the Binary Encoder is invalid. 2) When all inputs of the Encoder are zero, or when the first input of the Encoder is high then the output of the encoder is same. (All N output bits are 0). In other words, for two different input conditions, the output of the encoder is same. These two limitations can be eliminated using the priority encoder. This video will be helpful to all the students of science and engineering in understanding the binary encoder and its working and applications. #ALLABOUTELECTRONICS#Encoder#BinaryEncoder#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Demultiplexer Explained | How to Use Decoder as Demultiplexer | 1 to 4 and 1 to 8 Demultiplexer ALL ABOUT ELECTRONICS 2022-04-24 | In this video, the Demultiplexer and its applications, and how the Decoder can be used as a Demultiplexer is explained in detail.The following topics are covered in the video:0:00 What is Demultiplexer? Types of Demultiplexer2:41 Applications of Demultiplexer4:05 Decoder as Demultiplexer and the logic circuit of DEMUX7:05 1 to 16 DEMUX using 1 to 8 DEMUX8:55 1 to 16 Demultiplexer using 1 to 4 Demultiplexer10:45 Logic Circuit Implementation using DemultiplexerThe link for other useful videos:1) Decoder in Digital Electronics:youtu.be/a3wh7xV5PBU2) Multiplexer Explainedyoutu.be/aQlF-9i3fAA3) Digital Electronics (Playlist):bit.ly/31gBwMaWhat is Demultiplexer?The decoder is a combinational circuit that has 1 input and M outputs and depending on the inputs at the selection lines, the input of the demultiplexer appears at one of the outputs. That's why it is also called, one to many device. If the multiplexer has N selection lines then total 2 ^ N outputs can be distinguished using the N selection lines. Depending on the number of selection lines and outputs, there are different types of Demultiplexers.e.g 1 to 2 Demultiplexer, 1 to 4 Demultiplexer, 1 to 8 Demultiplexer etc. Applications of Demultiplexer: In time-division multiplexing applications, the multiplexer and demultiplexer are used together. The multiplexer is used on the transmitter side, while the demultiplexer is used on the receiver side. It can also be used for Serial to Parallel Conversion.And since the design of Demultiplexer is similar to the Decoder, it can also be used in all the applications where the decoder is used. The Decoder as Demultiplexer:In this video, how to use the decoder as a demultiplexer is explained. And at the later part of the video, using the Demultiplexer, how to implement the different Boolean Functions is also explained. This video will be helpful to all the students of science and engineering in understanding what is demultiplexer, its applications, and how to use demultiplexer for implementing different logic circuits.#ALLABOUTELECTRONICS#Demultiplexer#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Logic Gates using Multiplexer | How to implement a logic gate using the multiplexer ? ALL ABOUT ELECTRONICS 2022-04-15 | In this video, how to implement different logic gates (AND, OR, NOT, NAND, NOR, XOR, and XNOR) using the 2 x 1 Multiplexer is explained. The following topics are covered in the video:0:00 Introduction1:02 NOT gate using the Multiplexer2:00 AND gate using the Multiplexer5:00 OR gate using the Multiplexer6:52 NOR gate using the Multiplexer8:52 NAND gate using the Multiplexer10:53 XOR gate using the Multiplexer12:28 XNOR gate using the MultiplexerFor more information, check this video on multiplexer:youtu.be/aQlF-9i3fAAImplementation of the logic gates using the multiplexer:The multiplexer itself is made up of different logic gates. But sometimes, during the design of any logic circuit, if any logic gate IC is not available then multiplexer IC can be used as a logic gate. In this video, how to design different logic gates using 2 x 1 MUX is explained in detail.This video will be helpful to all the students of science and engineering in learning the implementation of the different logic gates using the multiplexer. #ALLABOUTELECTRONICS#Multiplexer#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Multiplexer Explained | Implementation of Boolean function using Multiplexer ALL ABOUT ELECTRONICS 2022-04-06 | In this video, what is a multiplexer, the logic circuit of the multiplexer, and how to implement the Boolean Function using the multiplexer are explained in detail.The following topics are covered in the video:0:00 What is Multiplexer?3:10 The logic circuit of 2 to 1 multiplexer and 4 to 1 Multiplexer6:12 8 to 1 Multiplexer using 4 to 1 Multiplexer (and 2 to 1 MUX)8:51 8 to 1 Multiplexer using 2 to 1 Multiplexers11:58 16 to 1 Multiplexer using 4 to 1 Multiplexers12:43 Boolean Function Implementation using MultiplexerFor more videos related to Digital Electronics, check this playlist:bit.ly/31gBwMaWhat is Multiplexer?The Multiplexer is the combinational circuit that has M inputs, 1 output, and N selection lines. And using the selection lines, any one of the inputs is connected to the output. The multiplexer is often referred as MUX during the block diagram representation. If the multiplexer has M inputs then the total number of selection lines are log 2 (M). Or if the multiplexer has N selection lines then the total number of inputs are 2 ^N.Depending on the number of inputs and selection lines, there are different types of multiplexers, e.g 2 x 1 MUX, 4 x 1 MUX, 16 x 1 MUX, etc.Large Multiplexer using Small Multiplexer:As the number of inputs to the multiplexer increase, the required number of AND/ OR gates also increases. And hence the cost and the complexity of the design also increase. So, typically the large multiplexer is designed using the small multiplexers. In this video, the design of 8 x 1 MUX using 4 x 1 MUX and 2 x 1 MUX is explained. Boolean Function Implementation using Multiplexer:The multiplexer can be used to implement different Boolean Functions. In this video, two different methods for Boolean Function Implementation are shown using examples.This video will be helpful to all the students of science and engineering in understanding what is multiplexer and how to implement Boolean functions using the Multiplexer. #ALLABOUTELECTRONICS#Multiplexer#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Decoder Explained | What is Decoder? Applications of Decoder | 5 to 32 Decoder using 3 to 8 Decoders ALL ABOUT ELECTRONICS 2022-03-23 | In this video, what is decoder, different applications of the decoder, and the logic circuit of the decoder are explained. The following topics are covered in the video:0:00 What is Decoder?2:01 Applications of Decoder5:13 Circuit Diagram of 3 to 8 Decoder and BCD to Decimal Decoder9:55 4 to 16 Decoder using 3 to 8 Decoders11:58 3 to 8 Decoder using 2 to 4 Decoder13:15 5 to 32 Decoder using 3 to 8 Decoders16:35 Implementation of Logic Circuit using DecoderFor more information, check this playlist on Digital Electronicsbit.ly/31gBwMaWhat is Decoder?The Decoder is the logic circuit that has N inputs and M outputs. And depending on the input combination of N inputs, only one of the M outputs is high. Applications of Decoder:1) Coder Conversion2) Address Decoding in Processor3) Generating the control signals for peripheral devices 4) Implementing logic circuits (e.g Full adder, parity generator, etc.)In this video, the logic circuit of 3 to 8 decoder and BCD to decimal Decoder is explained in detail. And at the later part of the video, how to design 5 to 32 decoder using 3 to 8 Decoders is also explained. This video will be helpful to all the students of science and engineering in understanding the basics of the decoder and its different applications. #ALLABOUTELECTRONICS#DecoderSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
What is Magnitude Comparator (Digital Comparator) | 1-bit, 2-bit and 4-bit Comparators Explained ALL ABOUT ELECTRONICS 2022-03-10 | In this video, the design of 1-bit, 2-bit, and 4-bit Magnitude Comparators are explained in detail and at the later part of the video, the implementation of 4-bit and 8-bit comparators using 7485 IC is also explained. The following topics are covered in the video:0:00 Introduction1:02 1-bit Magnitude Comparator2:37 2-bit Magnitude Comparator12:19 4-bit Magnitude Comparator17:00 4-bit and 8-bit Comparator using 7485 ICDigital Electronics (Playlist):bit.ly/31gBwMaQuiz-394 youtu.be/nbAmOzvDc0cWhat is Magnitude Comparator:The Magnitude Comparator or Digital Comparator is the digital circuit that compares the two binary numbers and determines whether the one number is greater than, less than, or equal to the other number. In this video, the design of a 1-bit, 2-bit, and 4-bit comparator is explained in detail. This video will be helpful to all the students of science and engineering in understanding the design of the Magnitude Comparator (Digital Comparator). #ALLABOUTELECTRONICS#MagnitudeComparator#DigitalComparator#Comparator#DigitalElectronicsSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Parity Generator and Parity Checker Explained ALL ABOUT ELECTRONICS 2022-03-03 | In this video, the design and working of the Parity Generator and Parity Checker circuit are explained. The following topics are covered in the video:0:00 Introduction1:43 Odd and Even Parity Generator (Working and Design)5:59 Odd and Even Parity Checker (Working and Design)For more information, check this video on Parity:youtu.be/Bwih7_AT1oIWhat is Parity?Parity Bit is a simple form of error detecting code, where the additional bit is added along with the data bits.There are two types of Parity:1) Odd Parity2) Even ParityOdd Parity: In odd parity, the parity bit is set in such a way that the total number of 1s in the code, including the parity bit is Odd.Even Parity: In Even parity, the parity bit is set in such a way that the total number of 1s in the code, including the parity bit is Even.For error detection, the parity bit is appended with data bits, and the code is sent to the receiver.At the receiver, the parity checker circuit checks the parity of the received code and detects the error.Limitations of Parity Bit:The Parity bit can detect only odd numbers of errors. If there are even a number of errors in the received code, it will remain undetected. Moreover, the Parity bit can just detect the error in the code (if the number of errors in the received code is odd) but it can't correct the error.In this video, the design of the 3-bit Parity Generator and 4-bit parity checker is explained using a truth table.This video will be helpful to all the students of science and engineering in understanding the design and working of the Parity Generator and Parity Checker circuits. #ALLABOUTELECTRONICS#Parity#ParityGenerator#ParityCheckerSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
4-bit Adder and Subtractor Circuit Explained ALL ABOUT ELECTRONICS 2022-02-19 | In this video, the 4-bit adder/ subtractor circuit is explained in detail. The following topics are covered in the video:0:00 Introduction0:30 4-bit Subtractor Circuit (using Full Subtractors)3:23 4-bit Subtraction using adder circuit9:29 4-bit Adder / Subtractor circuit For more information, check these videos:1) Half Adder and Full adderyoutu.be/5XbRIVWFRIw2) Ripple Carry Adderyoutu.be/b70ZQwci5sY3) Half Subtractor and Full Subtractoryoutu.be/lqN8xLTtdaA4-bit Adder / Subtractor Circuit:In this video, the circuit for the 4-bit adder and subtractor is explained. By watching this video, you will learn how to design a logic circuit that can perform both addition and subtraction. This video will be helpful to all the students of science and engineering in understanding the design of a 4-bit adder/ subtractor circuit. #ALLABOUTELECTRONICS#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Half Subtractor and Full Subtractor Explained ALL ABOUT ELECTRONICS 2022-02-12 | In this video, the Half Subtractor and Full Subtractor are explained in detail.By watching this video, you will learn what is half and full subtractors and how to implement a full subtractor using half subtractors.Timestamps:0:00 Half Subtractor3:34 Full Subtractor11:11 Full Subtractor using Half SubtractorsWhat is Half Subtractor?It is the combinational circuit that performs the subtraction of two input bits and generates the difference and borrow bits as an output.The logic circuit of the Half subtractor consists of one two-input XOR gate (Difference output) and, one AND gate and NOT gate (Borrow Output). The Boolean expression of Difference and Borrow output of Half Subtractor:D = A (XOR) B (The difference output)B = A'B. (The borrow output)The half-subtractor circuit can perform the subtraction of two one-bit numbers without any borrow input. It is suitable for the subtraction of the two one-bit numbers at the LSB positions. Full Subtractor:The Full-subtractor is the combinational circuit that performs the subtraction of two input bits and the incoming borrow bit and generates the difference and the borrow bits as an output. The Boolean expression of Difference and Borrow output of Full Subtractor:D = A (XOR) B (XOR) BinBout = A'B + Bin [ A (XOR) B ] 'The Full Subtractor circuit can be implemented using the two Half Subtractors and one OR gate. In this video, the design of Full Subtractors using Half Subtractors is also explained. Digital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflThis video will be helpful to all the students of science and engineering in understanding the Half Subtractor and Full Subtractor Circuits, and how to design a Full Subtractor using Half Subtractors. #ALLABOUTELECTRONICS#HalfSubtractor#FullSubtractor#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Carry Look Ahead Adder (CLA) Explained ALL ABOUT ELECTRONICS 2022-02-07 | In this video, the Carry Look Ahead Adder (Look Ahead Carry Adder) is explained in detail and the design of the 16-bit adder using 4-bit Carry Look ahead (CLA) blocks is also explained at the later part of the video.Timestamps:0:00 Limitation of Ripple Carry Adder2:00 Carry Generation and Carry Propagation logic in CLA4:40 Carry Look Ahead logic for 4-bit Adder10:28 Delay Comparison between Ripple Carry Adder and Carry Look Ahead Adder13:30 Limitations of Carry Look Ahead Adder14:52 16-bit Adder using 4-bit CLA blocksDigital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflCarry Look Ahead Adder:In Carry Look Ahead Adder, using the Carry Look Ahead logic (the additional combinational circuit), the carry bit of each adder is generated at the same time. In this Look Ahead Carry Adder, each stage of the adder receives the carry bit at the same time. And hence, the speed of the addition is much faster than Ripple Carry Adder. As the number of bits in the adder circuit increases, the improvement in the speed is more prominent. Limitation of Carry Look Ahead Adder:As the number of bits in the adder increases, the cost and the complexity of the design increase. This video will be helpful to all the students of science and engineering in understanding the Carry Look Ahead Adder (CLA). #ALLABOUTELECTRONICS#CarryLookAheadAdder#LookAheadCarryAdder#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Ripple Carry Adder Explained (with Solved Example) | Working and Limitation of Ripple Carry Adder ALL ABOUT ELECTRONICS 2022-01-25 | In this video, the Ripple Carry Adder (Parallel Adder) is explained in detail. And at the later part of the video, the Solved example related to Ripple Carry Adder is also explained.The Following Topics are covered in the video:0:00 Introduction0:55 n-bit Parallel Adder (Ripple Carry Adder) and it's working4:16 Limitation of Ripple Carry Adder (using Example)10:01 Solved ExampleRipple Carry Adder:In Ripple Carry Adder, to add two n-bit numbers, the n-number of full-adder stages are cascaded. The output carry of one adder is given as an input to the next higher full-adder stage. Because of this arrangement, the carry has to propagate through each full-adder stage before it reaches the final stage of the adder. That is why it is known as the Ripple Carry Adder. This adder is also known as the parallel adder. Limitation of Ripple Carry Adder:Each full-adder stage has its own propagation delay. That means the moment we apply the input bits, the valid sum and carry output will be after finite delay. This propagation delay depends on the internal circuit of the full-adder as well as the propagation delay of each logic gate in the logic circuit. Because of this propagation delay, the carry output of each stage is available only after the propagation delay. And for the input carry, each stage has to wait until its previous stage generates the valid carry output. Therefore, the full-adder at the MSB position has to wait for the incoming carry for the longest time.Because of this carry propagation delay, the valid sum and carry output of the n-bit adder is available after a certain delay. And as the number of bits in the adder stage increases, this delay also increases. In this video, the limitation of this Ripple Carry Adder is explained using a couple of examples.For more videos related to digital circuits, check this playlist:youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflThis video will be helpful to all the students of science and engineering in understanding the Frequency Division Multiplexing (FDM) technique. #ALLABOUTELECTRONICS#RippleCarryAdder#ParallelAdder#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Half Adder and Full Adder Explained | The Full Adder using Half Adder ALL ABOUT ELECTRONICS 2022-01-11 | In this video, the Half Adder and the Full Adder circuits are explained and, how to design a Full Adder circuit using Half adders is also explained. Timestamps:0:00 Half Adder Circuit3:41 Full Adder Circuit11:52 Full Adder using Half AddersFor notes, check this link:allaboutelectronics.org/half-adder-and-full-adder-explainedHalf Adder:The Half Adder is the combinational circuit that adds the two bits and generates the Sum of two bits and Carry bit as an output. The logic circuit of the Half adder consists of one two-input XOR gate (Sum output) and one AND gate (Carry Output). The Boolean expression of Sum and Carry output of Half Adder:S = A (XOR) BC= ABThe half-adder circuit can add two one bits numbers, but if there is an incoming carry from the previous addition then it cannot be added using the Half adder. Full Adder:The Full-adder is the combinational circuit that adds the two bits and the incoming carry bit and generates the Sum bit and Carry bit as an output. The Boolean expression of Sum and Carry output of Full Adder:S = A (XOR) B (XOR) CinCout= AB + BC + AC Cout = AB + Cin [ A (XOR) B ] The Full Adder circuit can be implemented using the two Half Adders and one OR gate. In this video, the design of Full Adder using Half Adders is also explained. Digital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflThis video will be helpful to all the students of science and engineering in understanding the Half Adder and Full Adder Circuits, and how to design a Full Adder using Half Adders. #ALLABOUTELECTRONICS#HalfAdder#FullAdder#FullAdderUsingHalfAdder#DigitalElectronicsSupport the channel through a membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Dont Care Conditions in Karnaugh Map (with Solved Examples) ALL ABOUT ELECTRONICS 2022-01-08 | In this video, what is don't condition in digital circuits is explained, and using the don't care terms in the K-map, how to minimize the Boolean Function is explained using the Solved Examples. Chapters:0:00 What is Don't Care Condition2:07 Example 14:52 Example 28:32 Example 3Don't Care Condition:In digital circuits, many times some input combinations are never used. The output for these unused input combinations is un-specified. (e.g in 8421 BCD code, the six combinations are invalid codes ). Such input combinations are known as don't care combinations and in the K-map, such don't care terms are defined by either X or d. In the K-map, these don't care terms can be used for the minimization of the Boolean Function.In this video, through the different examples, it has been explained that how to use the don't care condition in the K-map for the minimization of the Boolean Function. Digital Electronics (Playlist)youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKafl This video will be helpful to all the students of science and engineering in understanding what is don't care condition in Digital Circuits and how to use them in the K-map during the minimization of Boolean Function. #ALLABOUTELECTRONICS#KarnaughMapSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
K-map: Prime Implicant and Essential Prime Implicant Explained ALL ABOUT ELECTRONICS 2021-12-25 | In this video, what is Prime implicant and what is Essential Prime Implicant is explained using examples. The following topics are covered in the video:0:00 Introduction1:21 What is Implicant?2:46 What is Prime Implicant and How to Identify the Prime Implicant in K-map?7:49 What is Essential Prime Implicant and How to Identify it in the K-map?What is Implicant?A minterm or group minterms which are adjacent and can be combined in the K-map are called Implicant.What is Prime Implicant?The largest group of "1"s which can be circled to cover the particular "1" (minterm) in the K-map is called Prime Implicant.What is Essential Prime Implicant?It is the prime implicant where at least one minterm or is not covered by any other prime implicant in the K-map.Minimizing the Boolean Function using Essential Prime Implicants:During the Minimization, by identifying the Prime Implicants and the Essential Prime Implicants, systematically we can find the minimal expression of the given Boolean function. Steps for finding the Minimal Expression:1) Find the Essential Prime Implicants and add them to the final solution2) Determine the minterms in the K-map which are not covered by Essential Prime Implicants3) Include the remaining minterms using Non-Essential Prime Implicants This video will be helpful to all the students of science and engineering in understanding the Prime Implicant and Essential Prime Implicant. And how to find the minimal solution of the Boolean Function by identifying the Essential Prime Implicants in the K-map. #ALLABOUTELECTRONICS#PrimeImplicaant#EssentialPrimeImplicantSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Karnaugh Map (K-map) : 4-Variable K- map Explained (with Solved Examples) ALL ABOUT ELECTRONICS 2021-12-18 | In this video, the 4 Variable K-map is explained and the minimization of the 4 variable Boolean functions using the K-map is explained with different examples.The following topics are covered in the video:0:00 Introduction0:26 Construction of 4-variable K-map4:31 Mapping the 4 variable Boolean Function in K-map6:00 Minimization of 4-variable Boolean Function using K-map10:25 Example 111:28 Example 213:11 Example 314:41 Example 416:08 Example 518:15 Example 6Karnaugh Map (K-map)The Karnaugh Map is a technique for simplifying the Boolean function.4- Variable K-map:The 4-Variable K-map consists of 4x4 cells. Each cell of the map represents a particular minterm. During the mapping of the function in the K-map, the minterms which are present in the function are represented as '1' in the map. (when the function is given in SOP form)The cells in the K-map are arranged such that, the two adjacent cells of the map differ by only 1 bit. Boolean Function Minimization using K-map (Rules):1) Make the group of adjacent '1's in the map to minimize the function. 2) The group of '1's should be in the power of 2. (i.e the group size should be 2, 4, 8, etc).3) The shape of the group can be either square or rectangle.4) During the minimization and grouping, just ensure that all the 1's in the map get covered.5) During Minimization, the overlapping of the group is allowed. In this video, the minimization of 4-variable functions using the K-map is explained with different examples.This video will be helpful to all the students of science and engineering in understanding the 4 variable Karnaugh Map (K-map) and how to minimize 4-variable Boolean expressions using K-map. #ALLABOUTELECTRONICS#KmapSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Karnaugh Map (K-map) : 2-Variable and 3-Variable K- map Explained ALL ABOUT ELECTRONICS 2021-12-05 | In this video, the minimization of the Boolean expression using the K-map is explained with different examples.The following topics are covered in the video:0:00 Introduction2:00 Construction of 2 and 3 Variable K-map5:16 Mapping of Boolean Function on K-map6:50 2-Variable K-map (Boolean Function Minimization)11:20 3-Variable K-map (Boolean Function Minimization)Karnaugh Map (K-map)The Karnaugh Map is a technique for simplifying the Boolean function.2-Variable K-map:The 2-Variable K-map consists of 2x2 cells. Each cell of the map represents a particular minterm. During the mapping of the function in the K-map, the minterms which are present in the function are represented as '1' in the map.3- Variable K-map:The 3-Variable K-map consists of 4x2 cells. Each cell of the map represents a particular minterm. During the mapping of the function in the K-map, the minterms which are present in the function are represented as '1' in the map.The cells in the K-map are arranged such that, the two adjacent cells of the map differ by only 1 bit. Boolean Function Minimization using K-map (Rules):1) By grouping the '1's in the map, it is possible to minimize the function. 2) The group of '1's should be in the power of 2. (i.e the group size should be 2, 4, 8, etc).3) The shape of the group can be either square or rectangle.4) During the minimization and grouping, just ensure that all the 1's in the map get covered.5) During Minimization, the overlapping of the group is allowed. In this video, the minimization of 2-variable and 3-variable functions using the K-map is explained with different examples.This video will be helpful to all the students of science and engineering in understanding the Karnaugh Map (K-map) and how to minimize any Boolean expression using K-map. #ALLABOUTELECTRONICS#KmapSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
SOP and POS Form : Non Canonical to Canonical Form Conversion of Boolean Expression ALL ABOUT ELECTRONICS 2021-11-26 | In this video, the Conversion of Boolean Expression from Non-Canonical to Canonical form is explained with solved examples.Timestamps:0:00 Introduction0:37 Sum of Product Form: Non-Canonical to Canonical Form Conversion3:00 Example 15:45 Example 27:43 Shortcut method for Non-Canonical SOP to Canonical form Conversion9:52 Product of Sum Form: Non-Canonical to Canonical Form Conversion12:35 Shortcut method for Non-Canonical POS to Canonical form Conversion14:17 Example 3Digital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflSOP and POS Form: Minterms and Maxtermsyoutu.be/YmKmS9bpMqM This video will be helpful to all the students of science and engineering in understanding the conversion of Boolean expression from Non-Canonical to Canonical form.#ALLABOUTELECTRONICS#SOPandPOSForm#SOPandPOSformSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Boolean Function Representation: SOP and POS Form | Minterms and Maxterms Explained ALL ABOUT ELECTRONICS 2021-11-18 | In this video, the Sum of Product (SOP) and Product of Sum (POS) form of Representation of Boolean Function is explained using examples. And what is minterm and maxterm in the Boolean Expression is also explained.The following topics are covered in the video:0:00 Introduction1:05 Sum of Product (SOP) form4:01 Product of Sum (POS) form7:16 What is Minterm12:21 What is Maxterm18:27 Canonical SOP to Canonical POS conversionBoolean Expression Representation:The Boolean Expression is typically represented in two forms.1) Sum of Product Form (SOP)2) Product of Sum Form (POS)There are two types of SOP and POS forms of representation.Canonical and Non-Canonical In this video, the Boolean Expressions in both Canonical and Non-Canonical SOP and POS forms are explained. And the concept of minterms and maxterms is also explained. What is minterm?It is the product term that contains all the variables of the function either in true form or complemented form.The canonical SOP form is Sum of Minterms. What is Maxterm?It is the sum term that contains all the variables of the function either in true form or complemented form.The canonical POS form is Product of Maxterms. In the later part of the video, how to write the Boolean expression in Canonical SOP or POS form from the truth table is also explained. Digital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflThis video will be helpful to all the students of science and engineering in understanding the SOP (Sum of Product) and POS (Product of Sum) form of representation of the Boolean Function and the concept of minterms and maxterms. #ALLABOUTELECTRONICS#SOPandPOS#Minterms#MaxtermsSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
NOR Gate as Universal Gate ALL ABOUT ELECTRONICS 2021-11-07 | In this video, the different logic gates (AND, OR, NOT, XOR, XNOR, etc.) are implemented using the NOR gate alone. The following topics are covered in the video:0:00 Introduction0:26 NOT gate using NOR gate1:06 OR gate using NOR gate1:50 AND gate using NOR gate2:52 NAND gate using NOR gate3:25 XNOR gate using NOR gate6:53 XOR gate using NOR gateUniversal Logic Gates:NAND and NOR gates are Universal Logic gates because using any of the two gates alone, it is possible to implement any logic function. And using either NAND or NOR gate alone, any logic gate can be implemented.In this video, it has been explained that how to implement any logic gate using NOR gate and thus how NOR gate is a universal gate. Digital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflThis video will be helpful to all the students of science and engineering in understanding how the NOR gate act as a universal gate and how to implement different logic gates using the NOR gate. #ALLABOUTELECTRONICS#UniversalGates#LogicGatesSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
NAND gate as Universal Gate ALL ABOUT ELECTRONICS 2021-10-31 | In this video, different logic gates (AND, OR, NOT, XOR, etc.) are implemented using only NAND gates. The following topics are covered in the video:0:00 Introduction0:50 NOT gate using NAND gate1:30 AND gate using NAND gate2:16 OR gate using NAND gate3:27 NOR gate using NAND gate4:00 XOR gate using NAND gate11:22 XNOR gate using NAND gateUniversal Logic Gates:NAND and NOR gates are Universal Logic gates because using any of the two gates alone, it is possible to implement any logic function. And using either NAND or NOR gate alone, any logic gate can be implemented.In this video, it has been explained that how to implement any logic gate using NAND gate and thus how NAND gate is a universal gate. Digital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflThis video will be helpful to all the students of science and engineering for understanding, how NAND gate is a universal gate and how to implement different logic gates using the NAND gate.#ALLABOUTELECTRONICS#LogicGate#NANDGateSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
De Morgans Law in Boolean Algebra Explained (with Solved Examples) ALL ABOUT ELECTRONICS 2021-10-23 | In this video, De Morgan's Law is explained with examples.Chapters:0:00 De Morgan's Law (with Proof)7:44 Example 19:17 Example 211:02 Example 3De Morgan's Law:1) (A+B)' = A' . B'2) (A.B)' = A' + B' These laws can be extended for more than 2 inputs also. These laws are useful in simplifying the Boolean expression which contains a negation. In this video, a few examples related to negation are also covered. Digital Electronics (Playlist)youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflThis video will be helpful to all the students of science and engineering in understanding De Morgan's Law in Boolean Algebra. #ALLABOUTELECTRONICS#BooleanLaws#DeMorgansLawSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
The Laws of Boolean Algebra Explained ALL ABOUT ELECTRONICS 2021-10-16 | In this video, the basic Boolean Algebra Laws like Commutative Law, Associative Law, Distributive Law, Absorption Laws, etc are explained in detail.Timestamps:0:00 Introduction1:26 AND Laws5:01 OR Laws8:51 Commutative Laws9:27 Associative Laws14:02 Distributive and Absorption LawsBoolean Algebra Laws:AND Laws:A.0 = 0A.1 = AA.A' = 0A.A = AOR LawsA + 0 = AA + 1 = 1A + A = AA + A' = 1Comutative LawA. B = B.AA + B = B + AAssociative Law:(A.B).C = A. (B.C)(A + B) + C = A + (B + C)Distributive Law :A. (B + C) = AB + ACA + BC = ( A + B) (A + C )Absorption Law:A + AB = AA . (A + B) = ADouble Negation Law:(A')' = ADigital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflThis video will be helpful to all the students of science and engineering in understanding the basic laws of Boolean Algebra. #ALLABOUTELECTRONICS#BooleanLaws#BooleanAlgebraSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
Logic Gates : XOR and XNOR gates Explained | XOR and XNOR gate as Inverter ALL ABOUT ELECTRONICS 2021-10-08 | In this video, the XOR gate and XNOR gates are explained in detail. In this video, two input XOR and XNOR gates, the applications of XOR and XNOR gates, and the XOR and XNOR gates with more than 2-inputs are explained. And at the end, how XOR and XNOR gates can be used as an inverter (as NOT gate) is also explained.Chapters:0:00 Introduction0:35 XOR gate 6:26 XNOR gate16:00 XOR and XNOR gate as InverterXOR gate (Exclusive OR Gate):The output of the 2-input XOR gate is high when both inputs are different. It can also be implemented using three basic gates. (AND, OR, and NOT gate). In this video, the implementation of the XOR gate using three basic gates is shown.In general, the output of the n-input XOR gate is high (logic '1'), when an odd number of inputs is high or logic '1'.Typically, more than a 2-input XOR gate is not readily available and it is implemented using multiple 2-input XOR gates.XNOR gate:The output of the XNOR gate is the complement of the XOR gate output. The output of the 2-input XNOR gate is high (logic '1' ) when both inputs are same. (either logic '0' or logic '1'). The XNOR gate can also be implemented using the three basic gates. (AND, OR, and NOT gates). In this video, the implementation of the XNOR gate using three basic gates is shown.In general, for the n-input XNOR gate, the output is high (logic '1') when the even number of inputs is high (logic '1').Similar to the XOR gate, more than 2-input XNOR gates are not readily available. And they are implemented using the 2-input XOR and XNOR gates. Applications of XOR and XNOR gate:1) Arithmetic Operations (Adder and Subtractor)2) Code Converter3) Error Correction and Error DetectionMultisim Simulation Link:multisim.com/content/kKC98HyPte2zsGjn6LbZa3/xnorThis video will be helpful to all the students of science and engineering in understanding the XOR and XNOR gates. #ALLABOUTELECTRONICS#LogicGatesSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
What is Logic Gate ? Logic Gates Explained ALL ABOUT ELECTRONICS 2021-09-29 | In this video, three basic logic gates (AND gate, OR gate, and NOT gate) and two universal logic gates (NAND gate and NOR gate) are explained using the Truth Table.Timestamps:0:00 What is Logic Gate?2:17 AND gate4:37 OR gate6:23 NOT gate7:38 NAND gate9:38 NOR gateFor Notes, check this link:allaboutelectronics.org/logic-gates-explainedWhat is Logic Gate?The logic gates are very basic building blocks of digital systems. The logic gates are electronic circuit that consists of one or more inputs and one output.The relation between the input and output is based on certain logic. With the help of the logic gates, it is possible to perform different Boolean operations.Types of Logic Gates:AND, OR and NOT gate are three very basic logic gates. Using these three gates, it is possible to implement any Boolean function.NAND and NOR are universal logic gates because using any of the two gates alone it is possible to implement any Boolean function.Apart from that, there is an XOR and XNOR gate. In this video, three basic gates and two universal gates are explained using the Truth Table. Digital Electronics (Playlist):youtube.com/playlist?list=PLwjK_iyK4LLBC_so3odA64E2MLgIRKaflThis video will be helpful to all the students of science and engineering in understanding the basics of logic gates. #ALLABOUTELECTRONICS#LogicGateSupport the channel through membership program:youtube.com/channel/UCBkOVp1Cqz4MR0LYR8vKpZg/join--------------------------------------------------------------------------------------------------Follow my second channel:youtube.com/channel/UCGA2TO8ylVqFHpucwn_6JlwFollow me on Facebook:facebook.com/ALLABOUTELECRONICSFollow me on Instagram:instagram.com/all_about.electronics--------------------------------------------------------------------------------------------------Music Credit: http://www.bensound.com
