ML AutoMatte and Improved Selective Workflow Part 1 - Flame 2026.2 The Flame Learning Channel 2026-09-27 | ML AutoMatte and Improved Selective Workflow Part 1 - Flame 2026.2
Version Agnostic User Profile - Flame 2025 The Flame Learning Channel 2024-04-29 | Flame 2025 introduces a revamped user profile system, allowing users like freelancers to effortlessly access their preferences and settings with a simple click, regardless of where they are working. Level: BeginnerRecorded in: Autodesk Flame 2025Recorded by: Jeff Kyle If you wish to try what's new, you can download the free 30-day Flame trial at autodesk.com/products/flame/trial-intakeor if you are in education, you can sign up for a free license at autodesk.com/education/edu-softwareFor additional information, feedback and comments:User Management Release Noteshelp.autodesk.com/view/FLAME/2025/ENU/?guid=wn-2025-user-mgmtJoin the Logik community - home to Flame artists since 2020logik.tvAutodesk Blog blogs.autodesk.com/media-and-entertainmentAutodesk LinkedIn linkedin.com/showcase/autodesk-media-&-entertainment00:00 Introduction00:42 User Settings Location Changes01:27 User Profile Defaults Changes02:11 Keyboard Shortcut Changes03:11 User Profile Import/Export
Centralised Components - Flame 2025 The Flame Learning Channel 2024-04-29 | Understand how to configure a cohesive working environment by centralising components and presets on the network with Flame 2025.Level: IntermediateRecorded in: Autodesk Flame 2025Recorded by: Jeff Kyle If you wish to try what's new, you can download the free 30-day Flame trial at autodesk.com/products/flame/trial-intakeor if you are in education, you can sign up for a free license at autodesk.com/education/edu-softwareFor additional information, feedback and comments:Centralised Components Release Noteshelp.autodesk.com/view/FLAME/2025/ENU/?guid=wn-2025-central-componentsJoin the Logik community - home to Flame artists since 2020logik.tvAutodesk Blog blogs.autodesk.com/media-and-entertainmentAutodesk LinkedIn linkedin.com/showcase/autodesk-media-&-entertainment00:00 Introduction00:48 Preference Presets02:20 Tool Presets03:33 Modifying sysconfig.cfg05:09 sysconfig.cfg Tokens06:10 sysconfig.cfg Resolved Paths
Timeline Improvements - Flame 2025 The Flame Learning Channel 2024-04-26 | The Timeline receives a slew of workflow enhancements based on your feedback. The Sequence tabs sync with the Media Panel order, the Source Timeline tab is activated upon double-clicking a source clip in the Media Panel, and more.Level: BeginnerRecorded in: Autodesk Flame 2025Recorded by: Jeff Kyle If you wish to try what's new, you can download the free 30-day Flame trial at autodesk.com/products/flame/trial-intakeor if you are in education, you can sign up for a free license at autodesk.com/education/edu-softwareFor additional information, feedback and comments:Timeline Improvements Release Noteshelp.autodesk.com/view/FLAME/2025/ENU/?guid=wn-2025-timeline-improvemntsJoin the Logik community - home to Flame artists since 2020logik.tvAutodesk Blog blogs.autodesk.com/media-and-entertainmentAutodesk LinkedIn linkedin.com/showcase/autodesk-media-&-entertainment00:00 Introduction00:40 Timeline Tab Order02:10 Source Timeline Changes03:20 Opened Sequences Changes04:05 Export Current Sequence
The STMap Node - Flame 2025 The Flame Learning Channel 2024-04-22 | Flame 2025 introduces a brand new STMap node to make working with distortion maps easier than ever before. You can use the STMap node to either distort or undistort a clip by means of an STMap clip.Level: Intermediate Recorded in: Autodesk Flame 2025Recorded by: Jeff Kyle If you wish to try what's new, you can download the free 30-day Flame trial at autodesk.com/products/flame/trial-intakeor if you are in education, you can sign up for a free license at autodesk.com/education/edu-softwareFor additional information, feedback and comments:STMap Release Noteshelp.autodesk.com/view/FLAME/2025/ENU/?guid=wn-2025-stmapJoin the Logik community - home to Flame artists since 2020logik.tvAutodesk Blog blogs.autodesk.com/media-and-entertainmentAutodesk LinkedIn linkedin.com/showcase/autodesk-media-&-entertainment00:00 Introduction00:40 Inputs, Controls, and Outputs03:24 Use Entire Front Frame Example04:15 Use STMap to Front Ratio Example05:08 Use Data/Display Windows Example
Lens Distortion: Advanced Options - Flame 2025 The Flame Learning Channel 2024-04-16 | Discover some of the more advanced capabilities of the new Lens Distortion node like spline detection, the 3DEqualizer integration, and more.3DE4 Lens Distortion Plugin Kit: 3dequalizer.com/?site=tech_docs&id=110216_01Level: Intermediate Recorded in: Autodesk Flame 2025Recorded by: Jeff Kyle If you wish to try what's new, you can download the free 30-day Flame trial at autodesk.com/products/flame/trial-intakeor if you are in education, you can sign up for a free license at autodesk.com/education/edu-softwareFor additional information, feedback and comments:Lens Distortion Release Noteshelp.autodesk.com/view/FLAME/2025/ENU/?guid=wn-2025-lens-distortJoin the Logik community - home to Flame artists since 2020logik.tvAutodesk Blog blogs.autodesk.com/media-and-entertainmentAutodesk LinkedIn linkedin.com/showcase/autodesk-media-&-entertainment00:00 Introduction00:33 Distortion Grid Lines Detection02:08 Footage Lines Detection and Manual Splines03:34 Import 3DE Lens Distortion File04:12 Distortion Controls05:27 Perspective Controls
Lens Distortion: Basics - Flame 2025 The Flame Learning Channel 2024-04-15 | Learn how to accelerate your lens distortion workflow with Flame 2025's new Lens Distortion node.Level: Intermediate Recorded in: Autodesk Flame 2025Recorded by: Jeff Kyle If you wish to try what's new, you can download the free 30-day Flame trial at autodesk.com/products/flame/trial-intakeor if you are in education, you can sign up for a free license at autodesk.com/education/edu-softwareFor additional information, feedback and comments:Lens Distortion Release Noteshelp.autodesk.com/view/FLAME/2025/ENU/?guid=wn-2025-lens-distortJoin the Logik community - home to Flame artists since 2020logik.tvAutodesk Blog blogs.autodesk.com/media-and-entertainmentAutodesk LinkedIn linkedin.com/showcase/autodesk-media-&-entertainment00:00 Introduction00:49 Lens Distortion Overview01:56 Inputs, Modes, and Models 03:09 One-Click Distort Workflow03:32 Controls and Outputs05:51 Re-Distort Workflow
Match Grain: Advanced Options - Flame 2025 The Flame Learning Channel 2024-04-12 | In this video, get to know the Match Grain node better! Dive into the grain dispersion workflow, how to use an external Matte , and how to use the Scale and Transform tools. Level: Intermediate Recorded in: Autodesk Flame 2025Recorded by: Jeff Kyle If you wish to try what's new, you can download the free 30-day Flame trial at autodesk.com/products/flame/trial-intakeor if you are in education, you can sign up for a free license at autodesk.com/education/edu-softwareFor additional information, feedback and comments:Match Grain Release Noteshelp.autodesk.com/view/FLAME/2025/ENU/?guid=wn-2025-match-grainJoin the Logik community - home to Flame artists since 2020logik.tvAutodesk Blog blogs.autodesk.com/media-and-entertainmentAutodesk LinkedIn linkedin.com/showcase/autodesk-media-&-entertainment00:00 Introduction00:33 When to Use Dispersion01:52 Dispersion03:18 Using a Matte Input04:27 Scale and Transform Controls
Match Grain: Basics - Flame 2025 The Flame Learning Channel 2024-04-12 | In this video, meet the Match Grain node! The Match Grain node brings you a brand new grain workflow to regrain your work with greater control, flexibility, and speed. Level: Intermediate Recorded in: Autodesk Flame 2025Recorded by: Jeff Kyle If you wish to try what's new, you can download the free 30-day Flame trial at autodesk.com/products/flame/trial-intakeor if you are in education, you can sign up for a free license at autodesk.com/education/edu-softwareFor additional information, feedback and comments:Match Grain Release Noteshelp.autodesk.com/view/FLAME/2025/ENU/?guid=wn-2025-match-grainJoin the Logik community - home to Flame artists since 2020logik.tvAutodesk Blog blogs.autodesk.com/media-and-entertainmentAutodesk LinkedIn linkedin.com/showcase/autodesk-media-&-entertainment00:00 Introduction00:48 Inputs and Setup01:52 Controls03:18 Outputs04:27 Extracted Grain Workflow
Whats New in Flame 2025 The Flame Learning Channel 2024-04-11 | In this video, see what's new in Flame 2025, like a brand new Match Grain node, STMap node, a reworked user system, and much more to help you accelerate creative workflows.Subscribe for more Flame 2025 videos. Level: BeginnerRecorded in: Autodesk Flame 2025Recorded by: Jeff Kyle If you wish to try what's new, you can download the free 30-day Flame trial at autodesk.com/products/flame/trial-intakeor if you are in education, you can sign up for a free license at autodesk.com/education/edu-softwareFor additional information, feedback and comments:Join the Logik community - home to Flame artists since 2020logik.tvAutodesk Blog blogs.autodesk.com/media-and-entertainmentAutodesk LinkedIn linkedin.com/showcase/autodesk-media-&-entertainment00:00 Introduction00:18 Match Grain00:50 Lens Distortion01:13 STMap 01:27 Timeline Improvements01:51 Centralised Components 02:15 Version Agnostic User Profile❤️ New Flame 2025 welcome screen courtesy of MBUSA, M+P, The-Artery
Paste Special in Batch - Flame 2024 The Flame Learning Channel 2023-05-08 | In this video, learn how you can streamline common tasks and easily move metadata around with Paste Special in Batch. Level: BeginnerRecorded in: Autodesk Flame 2024Recorded by: Jeff Kyle If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at autodesk.com/education/edu-software/overview?sorting=featured&filters=individualFor Additional Information, Feedback and Comments:Flame Blog blogs.autodesk.com/media-and-entertainment/category/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 Introduction00:42 T-Click Technique01:24 Paste Special with Render / Write Nodes02:32 Paste Special with Other Nodes03:03 Copying Metadata in a Sequence
Batch Paint Improvements - Part 4 - Tracking in Batch Paint - Flame 2024 The Flame Learning Channel 2023-05-03 | Batch Paint has been updated in Flame 2024 with a slew of improvements designed to accelerate your workflow. In this video, learn how to use the new tracking features inside Batch Paint. This video is Part 4 of 4. Level: Intermediate Recorded in: Autodesk Flame 2024Recorded by: Jeff Kyle If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at autodesk.com/education/edu-software/overview?sorting=featured&filters=individualFor Additional Information, Feedback and Comments:Flame Blog blogs.autodesk.com/media-and-entertainment/category/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 Introduction00:24 Tracking Overview02:49 Real-World Tracking Example
Batch Paint Improvements - Part 3 - Editing Paint Strokes - Flame 2024 The Flame Learning Channel 2023-04-28 | Batch Paint has been updated in Flame 2024 with a slew of improvements designed to accelerate your workflow. In this video, get up to speed on what has changed with Paint Strokes as a result of your feedback. This video is Part 3 of 4. Level: Beginner Recorded in: Autodesk Flame 2024Recorded by: Jeff Kyle If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at autodesk.com/education/edu-software/overview?sorting=featured&filters=individualFor Additional Information, Feedback and Comments:Flame Blog blogs.autodesk.com/media-and-entertainment/category/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 Introduction00:33 Selecting Multiple Paint Strokes01:36 Changing the Order of Strokes02:07 Delete and Clear Workflow02:55 Primary and Secondary Selections03:36 Live Update in the Viewport04:09 Select Reveals
Batch Paint Improvements - Part 2 - Default Settings & Consolidate - Flame 2024 The Flame Learning Channel 2023-04-27 | Batch Paint has been updated in Flame 2024 with a slew of improvements designed to accelerate your workflow. In this video, learn how to save your default Presets settings and what's changed with the Consolidate Paint strokes feature. This video is Part 2 of 4. Level: Beginner Recorded in: Autodesk Flame 2024Recorded by: Jeff Kyle If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at autodesk.com/education/edu-software/overview?sorting=featured&filters=individualFor Additional Information, Feedback and Comments:Flame Blog blogs.autodesk.com/media-and-entertainment/category/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 Introduction00:26 Saving Default Preset Settings1:51 Consolidate Changes
Batch Paint Improvements - Part 1 - Interface Updates - Flame 2024 The Flame Learning Channel 2023-04-25 | Batch Paint has been updated in Flame 2024 with a slew of improvements designed to accelerate your workflow, including changes to the user interface. This video is Part 1 of 4. Level: Beginner Recorded in: Autodesk Flame 2024Recorded by: Jeff Kyle If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at autodesk.com/education/edu-software/overview?sorting=featured&filters=individualFor Additional Information, Feedback and Comments:Flame Blog blogs.autodesk.com/media-and-entertainment/category/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 Introduction00:43 General Interface Updates01:19 Paint Mode and Brush Updates02:17 The Paint and Edit List03:05 Reveal Mode Rotation Shortcut03:36 Add Still Workflow04:57 Time Bar Improvements
Metadata Overlay - Flame 2024 The Flame Learning Channel 2023-04-12 | Flame 2024 welcomes a Metadata Overlay Mode to help you easily view metadata in the Timeline. You can leverage the new content-aware overlay menu to display clip metadata in context, save presets, and share them. Level: Beginner Recorded in: Autodesk Flame 2024Recorded by: Jeff Kyle If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at autodesk.com/education/edu-software/overview?sorting=featured&filters=individualFor Additional Information, Feedback and Comments:Flame Blog blogs.autodesk.com/media-and-entertainment/category/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 Introduction00:50 Finding the Metadata Overlay Mode02:01 Modifying the Metadata Overlay05:46 Metadata Overlay Presets06:35 Burn In Metadata on Export
Metadata Improvements - Start Frame - Flame 2024 The Flame Learning Channel 2023-04-12 | Flame 2024 introduces a handful of Start Frame updates for more control and flexibility for Batch creation and metadata manipulation, an exciting step in metadata pipeline integration with other software.Level: Beginner Recorded in: Autodesk Flame 2024Recorded by: Jeff Kyle If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at autodesk.com/education/edu-software/overview?sorting=featured&filters=individualFor Additional Information, Feedback and Comments:Flame Blog blogs.autodesk.com/media-and-entertainment/category/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 Introduction00:58 Start Frame Preferences02:04 Finding and Modifying the Start Frame05:54 Handles, Timewarps, and Start Frame07:39 Exporting and Start Frame
LucidLink Filespaces - Flame 2023.3 The Flame Learning Channel 2023-04-06 | Expand your creative and collaborative workflows by leveraging LucidLink Filespaces, the latest cloud file service and storage solution qualified for use with the Flame Family.This video will cover using LucidLink's Filespaces in Flame and Flare for shared access to source files in real-time. Learn more about LucidLink's Autodesk Flame Family's qualification: lucidlink.com/press-releases/lucidlink-expands-connected-creativity-strategy-with-autodesk-flame-qualificationLevel: Beginner Recorded in: Autodesk Flame 2023.3If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trial or if you are in education, you can sign up for a free license at autodesk.com/education/edu-software/overview?sorting=featured&filters=individualFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 Introduction01:11 Setting up LucidLink Filespaces01:45 Showing off the LucidLink Filespaces and Flame workflow03:34 Collaboration between a Flame and Flare artist with LucidLink Filespaces04:54 Conclusion
Animation Editor: P06 - The Edit Box - Flame 2023.2 The Flame Learning Channel 2022-10-19 | With Flame 2023.2, the team have continued to add more functionality to the animation editor based on your feedback.So now you can manipulate your animation keyframes using an Edit Box, giving you a more interactive experience when retiming and scaling an animation.This video will cover using the Edit Box on the Curves as well as using the Edit Box with the Dope Sheet.Level: BeginnerRecorded in: Autodesk Flame 2023.2 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:36 – Edit Box Basics01:33 – Repositioning with the Edit Box02:14 – Scaling with the Edit Box03:40 – Pivot!05:37 – The Edit Box on the Dope Sheet
Multi-Channel Usability - Flame 2023.2 The Flame Learning Channel 2022-10-19 | When it comes to handling multi-channel media in Flame 2023.2, there have been a few significant improvements to make it easier within the Flame workflow.So in this video, you’ll look at the multi-channel clip, the Multi-Channel rules, changes in Action Outputs And finally, how multi-channel media is now handled in the Render and Write File nodes.Level: IntermediateRecorded in: Autodesk Flame 2023.2 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:36 – The Multi-Channel Clip02:53 – Multi-Channel Rules05:38 – Caching Multi-Channel Media06:53 – Action Outputs& Rendering09:14 – Rendering Multi-Channels
Searching through Batch - Flame 2023.2 The Flame Learning Channel 2022-10-19 | As your composites grow larger in the Batch Schematic, it can sometimes get difficult to locate and find the nodes you’re looking for.As of Flame 2023.2, A new search tool has been added to the Batch Environment to help you find exactly what you want based off a set of criteria.In this video, you’ll learn how to search for specific nodes in the Batch Schematic, explore the various search options as well as set up presets for frequent quick and easy searching.Level: BeginnerRecorded in: Autodesk Flame 2023.2 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:41 – Searching the Nodes02:25 – Search Criteria Options04:17 – Using Search Presets
Render & Write File Updates - Flame 2023.2 The Flame Learning Channel 2022-10-19 | In the Flame 2023.2 update, a few enhancements have been made to the render and write file nodes based on your feedback.So in this video, we’ll discuss setting up a render, looking at the render duration, offsetting Timecodes where needed and various improvements to the Write File node which should make the Open Clip and Versioning workflows a lot easier.Level: IntermediateRecorded in: Autodesk Flame 2023.2 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:35 – Setting up a Render01:52 – Setup Duration02:57 – Offsetting Timecode04:58 – Write Node – Iterations & Padding05:47 - Write Node - Setups & Versioning08:01 – Write Node – Add to Workspace
Working Faster with Automatic Batch Durations - Flame 2023.2 The Flame Learning Channel 2022-10-19 | One of the many small improvements in Flame 2023.2 is a couple of automated functions to make your life even easier.In this video, you’ll touch on automatic Batch durations as well as automatic durations when setting up render and write file nodes.Level: BeginnerRecorded in: Autodesk Flame 2023.2 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:28 – Automatic Batch Durations02:29 – Rendering the right duration
Customising your UI with Batch Layouts - Flame 2023.2 The Flame Learning Channel 2022-10-19 | In Flame 2023.2, the team have continued to improve the Flame interface when it comes to node compositing.So now you have custom layouts in Batch, allowing you easily switch up the Batch UI as you perform certain tasks.This matches what you can currently do in the Effects Environment.So you’ll learn how to switch between the different Batch layouts, create your own Batch layouts, and some of the differences when using the layouts in either the Batch Environment or Effects Environment.Level: BeginnerRecorded in: Autodesk Flame 2023.2 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:44 – Switching Batch Layouts02:29 – Creating your own Batch layouts03:55 – Layout Behaviours
Flame Fundamentals - Module 8 - Part 10 - Curves in the Animation Editor The Flame Learning Channel 2022-09-21 | Once you have created any animation in Flame, all the animation is stored in the Animation Editor. This is displayed as curves on a graph or tracks on a dope sheet. This can also be visualised in a spreadsheet for information purposes. All the animation can accessed and edited to fine tune all animated channels. To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2023.1So in this video, you’ll cover how to access the Animation Editor, look at the different ways of visualising animation, animation channel selection, navigating the animation curve, adjusting the animation and finally some tools to manipulate the keyframes on the curve.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:40 – Accessing the Animation Editor02:01 – Visualizing Animation03:26 – Channel Curve Selection05:05 – Navigating the Curve05:52 – Editing the Curve07:52 – Keyframe Tools
Flame Capsule 059 - Choosing your colours with HEX Code Values - Flame 2023.1 The Flame Learning Channel 2022-08-12 | Today's 30 second Flame Capsule shows you how to work with colours as Hex Code values. So if you client supplies HEX values, you can now get the exact colours in Flame. Recorded in: Autodesk Flame 2023.1So instead of using RGB or HLS, you can enter in a HEX code value to get the exact colour!You can also sample a colour using the colour sampler floating window and choose to display the colour as a HEX code value!This functionality is new to Flame 2023.1New to Flame? Download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame
Flame Capsule 058 - Changing Bit Depths in the Colour Sampler - Flame 2023.1 The Flame Learning Channel 2022-08-05 | Today's 30 second Flame Capsule shows you how to change the bit-depth in the colour sampler to display a colour at different bit depths.Recorded in: Autodesk Flame 2023.1When using the pop-up colour sampler, the RGB values are always based on the bit depth of the source media. However using the colour sampler floating window, you can also see the source values but you can toggle the RGB values at different bit depths. We’ve even included the HEX code as an added bonus!Sample colours at every bit depth in Flame.This functionality is new to Flame 2023.1New to Flame? Download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame
Animation Editor: P05 - 7 Improvements in Flame 2023.1 The Flame Learning Channel 2022-07-13 | Flame 2023.1 brings a host of improvements to the revamped animation editor. This is mostly based on your feedback!This video covers usability improvements, range and keyframe indicators, selection enhancements, curve display, new filtering criteria and new expression linking options. Level: BeginnerRecorded in: Autodesk Flame 2023.1 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:18 - Reset & Delete with Context Menus01:08 - Knowing the Setup Range02:24 - Keyframe indicators03:14 - Selecting a range of keyframes04:19 - Show me the curves!05:36 - Improved Filtering choice07:46 - Linking Expressions
Python - Browsers and Messaging - Flame 2023.1 The Flame Learning Channel 2022-07-13 | With the release of Flame 2023.1, more Python functionality has been added to the Flame Products. This is available via the Flame API and a full list is available on the Flame "What's New" Documentation. This includes the new PyTransition for the Timeline and various MediaHub controls. This video will specifically cover browsing and messaging functionality using Python. This should enhance your user experience while driving Flame through scripting.Level: IntermediateRecorded in: Autodesk Flame 2023.1 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:42 - Browsing with PyBrowser04:20 - Did you get the message?
Project Management - Understanding Cache & Render Formats - Flame 2023.1 The Flame Learning Channel 2022-07-13 | When it comes to caching and rendering in the Flame products, you have a variety of formats to choose from. You would determine what to use based on your workflow and the type of media you are using.The Flame products have always been designed with this in mind and in Flame 2023.1, The menus and options have adjusted in order to give you better clarity. So you'll learn about render format choices and format details when selecting the appropriate format for your project.Level: BeginnerRecorded in: Autodesk Flame 2023.1 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame
Hardware Configuration - Test your Disk Performance! - Flame 2023.1 The Flame Learning Channel 2022-07-13 | Flame 2023.1 brings a host of improvements to the revamped animation editor. This is mostly based on your feedback!This video covers usability improvements, range and keyframe indicators, selection enhancements, curve display, new filtering criteria and new expression linking options. Level: BeginnerRecorded in: Autodesk Flame 2023.1 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:18 - Reset & Delete with Context Menus01:08 - Knowing the Setup Range02:24 - Keyframe indicators03:14 - Selecting a range of keyframes04:19 - Show me the curves!05:36 - Improved Filtering choice07:46 - Linking Expressions
Flame Fundamentals - Module 8 - Part 09 - Animating a Graphic The Flame Learning Channel 2022-06-14 | One key requirement of anyone doing finishing, VFX or grading is the ability to create animation. This could be moving an object across the screen or animating a particular value for a certain outcome.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2023.0.1So in this video you’ll examine the interface and slider controls used to animate as well the two different workflows of animation, Auto-KeyFraming and Manual KeyframingIf you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:28 – Getting to know the sliders02:25 – Auto-keyframing Animation04:22 – Manual Keyframing Animation
Flame Fundamentals - Module 8 - Part 08 - Blurring a Moving Object The Flame Learning Channel 2022-05-27 | In this video, you’ll learn how to blur a moving object. It is quite common practice to blur out a face or license plate for legal or rights reasons and it is very easy to do it with the Selectives and Matchbox Shaders in Flame.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2023.0.1So you’ll cover the creation of a Gmask, track the Gmask to an object using planar tracking and finally use a matchbox shader to blur or mosaic the object in the shotIf you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:38 – Creating a Gmask02:07 – Planar tracking the Gmask03:25 – Blurring with Matchbox Shaders
Animation Editor: P01 - Interface & New Defaults - Flame 2023 The Flame Learning Channel 2022-04-13 | Flame 2023 introduces a revamped animation editor with loads of modernisation and updates. Over the next four videos we'll cover features and improvements for a better user experience when working with animation in Flame.Starting off, you'll go through the updated interface and cover some of the new default behaviours which have been carefully chosen to improve your navigation and workflow of the animation channels.Level: BeginnerRecorded in: Autodesk Flame 2023 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:31 – Fresh Faced UI02:29 – Default Animation Behaviours04:45 – Animated Filtering05:17 – Automatic Framing
Animation Editor: P02 - Curves, Colours & Filtering - Flame 2023 The Flame Learning Channel 2022-04-13 | This video focuses on the curves, colour-coding and new channel filtering in Flame 2023.So you'll examine how the curves behave as well as the selection tools now available when manipulating keyframes and curves. You'll also cover the updated colour coding features, making it easier to visually identify an animation channel and curve when working in the editor.Finally, you'll learn all about the new filtering in the Animation Editor. This allows you to filter channels by various properties and even create custom filter presets that are connected to your user profile!Level: BeginnerRecorded in: Autodesk Flame 2023 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:21 – Working with Curves02:02 – Selecting & Deleting Keyframes04:15 – Colour My Channels05:10 – Filtering Animation Channels
Animation Editor: P03 - The Dope Sheet - Flame 2023 The Flame Learning Channel 2022-04-13 | The tracks editor has been renamed as the Dope Sheet and it controls the timings of an animation. So you can adjust the timing of a keyframe or a selection of keyframes and you can also slip entire channels.You'll also cover the functionality of scaling the timings of an animation to make it either longer or shorter. This can be achieved with a couple of workflows.Level: BeginnerRecorded in: Autodesk Flame 2023 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:33 – The Dope Sheet01:59 – Adjust Timings04:02 – Scale Timings
Animation Editor: P04 - The Animation View Workflow - Flame 2023 The Flame Learning Channel 2022-04-13 | With the updated to the Animation Editor, animating in Flame 2023 is easier then ever! This also includes updated workflows to give you lots more choice with the way to you like to create animation.For example, this video covers the Animation View Workflow whereby you can have the Animation Editor visible in a view. This enables you to see your animation curves and your composite at the same time! Now this might now be brand new to Flame 2023 however with the introduction of the context menus in the Animation Editor, you can now do so much with this workflow without having to switch menus in the interface to access standard controls. Huge Timesaver!!!Flame 2023 introduces a revamped animation editor with loads of modernisation and updates. Level: BeginnerRecorded in: Autodesk Flame 2023 If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Flame Centralhttp://newpossible.autodesk.com/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:37 – Setting up the Animation View02:12 – The Animation View Workflow
Flame Fundamentals - Module 8 - Part 05 - Layering with 2D Transform & Comp The Flame Learning Channel 2022-03-18 | In this video, you’ll learn one way of layering multiple video tracks in the sequence. This can be used for basic compositing or building creative combinations with multiple elements.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022So you’ll cover the basics of compositing two layers together, getting a layer into position with the 2D Transform TimelineFX and perform the final blending with the Comp Timeline FX.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:33 – Layering with the Comp Timeline FX02:08 – Getting into position with 2D Transform 03:19 – Blending with the Comp Timeline FX
Flame Fundamentals - Module 8 - Part 06 - Adding Basic Titles The Flame Learning Channel 2022-03-18 | One common aspect of finishing is applying title or text in the sequence.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022So you’ll learn the most optimal way for creating titles, get to grips with the basic workflow of the text tool, edit the look of the text and place it where you want.You’ll finish off by trimming the title And adding a fade in and out.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:29 – Using Gap Segments for Titles01:37 – Creating a Title with the Text Timeline FX02:57 – Editing your text05:12 – Moving your text06:14 – Fading a Title In & Out
Flame Fundamentals - Module 8 - Part 07 - Cutting with Gmasks The Flame Learning Channel 2022-03-18 | A typical skill when finishing or compositing is cutting up parts of your image using a Gmask.This masking tool can be used for compositing, motion graphics and even transitions. Other applications may refer to this as masks, roto-splines, or paths.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022So you’ll learn how to create a Gmask, the basics of the Gmask Tracer Timeline FX, softening or Feathering Gmasks and finally combining Gmasks for various levels of control.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:45 – Cut through video tracks with Gmasks03:23 – Softening the Gmask04:56 – Gmask Details07:16 – Gmask Schematic View07:55 – Combining Gmask Shapes
Flame Capsule 057 - Adjusting the Scopes Layout in the Viewport - Flame 2022.3 The Flame Learning Channel 2022-02-25 | Today's 30 second Flame Capsule shows you how to display the scopes in different configurations inside the viewports. This allows for comfortable viewing while grading with the scopes.Recorded in: Autodesk Flame 2022.3Scopes can be displayed in the viewport while grading. Depending on how many scopes are visible, things can get a bit squashed. To fix this, you can change the scopes layout via the Scope Settings menu. This works for all types of viewport configurations and is so useful to know! Getting the scopes in a comfortable layout within the viewport let's you see all the technical readings while keeping an eye on your images!This functionality is not new to Flame 2022.3New to Flame? Download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame
Flame Capsule 056 - Displaying Selectives with Selective Overlays - Flame 2022.3 The Flame Learning Channel 2022-02-18 | Today's 30 second Flame Capsule goes through the different options of showing a selective isolation using the Selective Overlays.Recorded in: Autodesk Flame 2022.3When it comes to working with Selectives, you can key and mask an area of your image. In order to view the isolation, you can view it as a matte/alpha or overlay. Unlike displaying a matte, the selective overlay gives you multiple options on how to display it. This includes in or out of the selective region, the colour and transparency of the overlay. These can even be set as your default overlay preferences!See exactly what you want with the Selective Overlays.This functionality is not new to Flame 2022.3New to Flame? Download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame
Flame Fundamentals - Module 8 - Part 01 - Say Hello to Timeline FX The Flame Learning Channel 2022-02-17 | With the start of this module, you'll begin to learn about doing VFX in Flame. This module will particularly focus on VFX in the sequence.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022So you'll cover the introduction of the Timeline FX Pipeline, applying Timeline FX, the various controls and the render indications.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:37 – The Timeline FX Pipeline01:50 – VFX with Timeline FX04:07 - FX Ribbon vs Effects Environment 06:33 – Rendering09:16 – Timeline FX and Gap Segments
Flame Fundamentals - Module 8 - Part 02 - Changing a Segments Speed The Flame Learning Channel 2022-02-17 | In this video, you’ll focus on changing the speed of a shot.You might call this “Speed Changing” or “Ramping”. In Flame, this is called “Time-Warping”.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022In this video you’ll change the speed of a shot, control how the frames deal with the speed change and finally, you’ll look at another scenario where you can adjust the speed of a segment over time.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:32 – Slow Down!02:24 – Change Speed when Trimming03:33 – Blending in04:50 – Changing Speed Over Time
Flame Fundamentals - Module 8 - Part 03 - Mixing Resolutions in a Sequence The Flame Learning Channel 2022-02-17 | In this video, you’ll learn how to mix multiple resolutions in a sequence.Due to the variety of cameras and formats available today, mixing media with different settings is quite a common occurrence.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022You’ll cover what happens when resolutions are edited together, what Timeline FX is used to make this happen and what settings you would tweak for the incoming formats.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:33 – Mixing Resolutions in the Edit02:04 – Resizing with a Timeline FX03:13 – Resizing Your Image05:08 – Cropping your Image
Flame Fundamentals - Module 8 - Part 04 - Animating a Reframed Shot The Flame Learning Channel 2022-02-17 | In this video, you’ll take a high-resolution shot and create a camera move that wasn’t originally there.This is quite common in VFX work and this is great for adding more drama to a shot or performing a typical “pan and scan” task.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022So you’ll start off by editing a high-resolution source into the sequence and setting up the TimelineFX in order to create a new camera move or “pan and scan”.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:34 – Get ready for Action Timeline FX02:04 – Adding a bit of movement
Flame Capsule 055 - Rendering out of the Sequence with Render Range - Flame 2022.3 The Flame Learning Channel 2022-02-11 | Today's 30 second Flame Capsule shows off a great functionality to render your sequence's BatchFX as new clips outside of the sequence.Recorded in: Autodesk Flame 2022.3Normally when rendering a node based composite in a BatchFX within the sequence, the BFX output node renders the result of the BatchFX to the segment in sequence. This means that the renders all stay with the sequence wherever it goes.However there are some instances where you would like to render your sequence's BatchFX to a reel in the Media Panel. This is outside of the sequence and the BFX Output node and usual render button do not do this. As an alternative, you would use a render node from the I/O bin, and the "Render Range" button within the render menus to generate a new clip outside of the sequence. You can have it your way in Flame!This functionality is not new to Flame 2022.3New to Flame? Download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free educational license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame
Flame Fundamentals - Module 7 - Part 01 - Colour Grading with MasterGrade The Flame Learning Channel 2022-01-06 | When it comes to finishing your production, colour Grading is equally as important as any visual effects. In short, colour grading is the manipulation of colours to stylize your production and this also includes matching shots from different cameras, locations, time of day, etc.Every production is touched by look development and Flame is well equipped to help you achieve the look you want.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022In this video, you’ll be introduced to grading via the Effects Environment, getting to grips with the scopes and start becoming familiar with the powerful MasterGrade toolset.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:48 – Getting Ready to Grade!04:11 – Scopes Up!05:29 – The Grading Pipeline06:39 – Primaries, Tone & Curves08:36 – Before and After
Flame Fundamentals - Module 7 - Part 02 - Grading through a Selective The Flame Learning Channel 2022-01-06 | One other aspect of look development is focusing a grade on different parts of your image.You may want to emphasize something specific or completely relight a scene.Flame utilizes a tool known as a Selective which isolates your grade to specific parts of your image.This is called “power windows” in other applications.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022In this video…You’ll learn how to apply a selective…And look at the various options…To get exactly the grade you want.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:38 – Adding a Selective01:31 – Grading through a Selective02:27 – Selective Overlays & Mattes03:47 – Working with multiple shapes06:08 – Tracking a Shape07:19 – Selectives: HUD vs Schematic
Flame Fundamentals - Module 7 - Part 03 - Adding a Vignette The Flame Learning Channel 2022-01-06 | One popular creative effect when it comes to look development is using a vignette.This is when you darken the corners of your image to draw your attention to the center.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022This video will cover two ways of applying a vignette.Firstly, you’ll learn how to use a mask to create a vignette or alternatively, you’ll learn how to apply a SelectiveFX Shader to create a vignette. Both achieve the same result when used with a Selective.If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:38 – Vignettes with Masks01:51 – Vignettes with SelectiveFX
Flame Fundamentals - Module 7 - Part 04 - Grading Inside & Outside of a Selective The Flame Learning Channel 2022-01-06 | When working with a Selective, you could grade on the inside or the outside of the isolated area.However, there are situations when you need to grade on both the inside and outside of the same Selective.So let’s cover the workflow on how you can achieve this.To download the media and follow along, click the link to Module 1 - Part 1 and you will find the download link in the video description - youtube.com/watch?v=YR3gfYxwXdcLevel: BeginnerRecorded in: Autodesk Flame 2022If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trialor if you are in education, you can sign up for a free license at http://www.autodesk.com/education/free-software/flameFor Additional Information, Feedback and Comments:Autodesk Areahttp://area.autodesk.com/learning/resource/flameFacebookhttp://www.facebook.com/AutodeskFlameTwitter@Autodesk_Flame #AutodeskFlame00:00 - Introduction00:25 – Create & Track the Selective Isolation01:55 – Grading Inside or Outside the Selective02:36 – Grading In & Out with one Selective
