Chris from L3DI was really looking forward to testing the LightMake L4. After covering its features in an earlier sponsored video, LightMake sent me an early EVT prototype so I could put it through its paces and share my experience.
Unfortunately, things didn't go quite as planned.
Over the course of nearly a week, I experienced calibration problems, poor print quality, software errors and several other issues that made testing the machine increasingly difficult.
Despite spending considerable time troubleshooting and communicating with LightMake, I eventually made the decision to end the collaboration and return the printer.
In this video, I explain what happened, the problems I encountered and why I ultimately decided to walk away.
*IMPORTANT CLARIFICATION:*
The LightMake L4 I received was an early EVT prototype, NOT a final production machine. I have not tested the production version, and the issues I experienced may have been addressed since then.
This video is simply an account of my own experience with the machine I was supplied. I wanted to share what happened openly and fairly, while recognising that the final production version may be very different.
---
*ABOUT L3D ACCESSORIES*
I create videos covering 3D printing, laser engraving, CNC machines, UV printing and other maker technology, sharing tutorials, projects and my experiences with the equipment I test.
Why I Walked Away From the LightMake L4Chris from L3D2026-10-07 | I was really looking forward to testing the LightMake L4. After covering its features in an earlier sponsored video, LightMake sent me an early EVT prototype so I could put it through its paces and share my experience.
Unfortunately, things didn't go quite as planned.
Over the course of nearly a week, I experienced calibration problems, poor print quality, software errors and several other issues that made testing the machine increasingly difficult.
Despite spending considerable time troubleshooting and communicating with LightMake, I eventually made the decision to end the collaboration and return the printer.
In this video, I explain what happened, the problems I encountered and why I ultimately decided to walk away.
*IMPORTANT CLARIFICATION:*
The LightMake L4 I received was an early EVT prototype, NOT a final production machine. I have not tested the production version, and the issues I experienced may have been addressed since then.
This video is simply an account of my own experience with the machine I was supplied. I wanted to share what happened openly and fairly, while recognising that the final production version may be very different.
---
*ABOUT L3D ACCESSORIES*
I create videos covering 3D printing, laser engraving, CNC machines, UV printing and other maker technology, sharing tutorials, projects and my experiences with the equipment I test.
#LightMakeL4 #3DPrinting #3DPrinterReviewxTool Studio Tip #9: Turn Any QR Code Into a Vector (Trace Image)Chris from L3D2026-11-16 | This QR code started as a photo. Now it's a vector. Trace in xTool Studio turns an image into a clean vector, so you only need power and speed to engrave it. What else would you trace? It's one of 13 tips in my full xTool Studio video. Watch it here: youtu.be/3fTy_pAoVso Free laser settings library: l3daccessories.com/pages/settings-library #xTool #xToolStudio #LaserEngraving #shorts @xtoollaserukxTool Studio Tip #8: 1,024 Layers For 3D Relief (16-Bit Depth Maps)Chris from L3D2026-11-15 | 256 layers used to be the limit for 3D relief in xTool Studio. Not anymore. 16-bit depth maps now go up to 1,024 layers, so in theory four times the detail. Would you try 1,024 layers? The full video goes through the whole update. Watch it here: youtu.be/XfhZoyxSszk Free laser settings library: l3daccessories.com/pages/settings-library #xTool #xToolStudio #LaserEngraving #shorts @xtoollaserukNever Welded Before. How Hard Can It Be? #shortsChris from L3D2026-11-14 | I'd never welded in my life. Could I lay a clean weld before the day was out? I went to see xTool's truck at the Classic Motor Show at the NEC, had a go on the MetalFab laser welder with Stewie, then Mandy cut my 40K subscriber award out of 1 mm stainless steel in 53 seconds. Would you try laser welding? xTool (supports the channel at no extra cost): xtool.com/?ref=clipoxfr&utm_medium=affiliate&utm_source=goaffpro&utm_term=4965 #xTool #LaserWelding #Welding #shorts @xtoollaseruk @xtoollaserxTool Studio Tip #7: Keep Every Dot Of Your Photo Prep (Passthrough)Chris from L3D2026-11-14 | Spent ages prepping a photo, then the laser software changed it anyway? The new Passthrough mode in xTool Studio engraves the dots exactly as your image prep software made them. Do you prep photos outside Studio? Every new feature is in the full xTool Studio update video. Watch it here: youtu.be/XfhZoyxSszk Free laser settings library: l3daccessories.com/pages/settings-library #xTool #xToolStudio #LaserEngraving #shorts @xtoollaserukxTool Studio Tip #6: Use Laser Settings Shared By Other MakersChris from L3D2026-11-13 | Someone already made the laser setting you need. Now you can use it. The material library in xTool Studio has a Community tab, so you can apply settings other makers have shared, like this wooden keychain emboss. Would you share your settings? The full update video covers all 13 new features. Watch it here: youtu.be/XfhZoyxSszk Free laser settings library: l3daccessories.com/pages/settings-library #xTool #xToolStudio #LaserEngraving #shorts @xtoollaserukHow to Make Your Own T-Shirts at Home | xTool Apparel Printer PlusChris from L3D2026-11-13 | How to make your own custom T-shirts at home with the xTool Apparel Printer Plus and the xTool WonderPress, start to finish: designing it in xTool Studio, printing and curing the DTF transfer, then pressing it onto a 2XL heavy cotton tee, front and back.
Covered: machine checks before you print, sizing your design to the press, mirror printing, my print settings, ink usage and cost per print, the shaker oven, pre-pressing and lint rolling the shirt, my center-line trick for placement, press settings, cooling and peeling, and the second press.
If this helps you make your first shirt, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
⚙️ Press settings I used
• DTF to cotton preset: 320°F (160°C), 20 seconds, 176 lb (80 kg) pressure
• Pre-press 3 seconds, cool about a minute, peel, then a second 20-second press with the Teflon sheet
💬 What would you put on your first shirt? Let me know in the comments!
👥 More From L3D
• All my links, shop and socials: https://linktr.ee/l3daccessories
• Buy me a coffee ☕: buymeacoffee.com/chrisfromL3D
⏱️ Chapters
0:00 Intro
0:31 Step 1: Check the Machine
1:45 Step 2: Design in xTool Studio
5:20 Step 3: Print and Cure
7:18 Step 4: Cut Out the Transfer
7:27 Step 5: Prep the Shirt
10:19 Step 6: Press and Peel
12:37 Step 7: Add the Front Logo
13:18 Step 8: The Finished Shirt
#xTool #DTFPrinting #ApparelPrinterxTool Studio Tip #5: Drag Left Or Right? It Matters NowChris from L3D2026-11-12 | Which way you drag in xTool Studio now changes what gets selected. Left to right picks only what you fully cover. Right to left grabs anything you touch. Did you know this one? I show every new feature in the full xTool Studio update video. Watch it here: youtu.be/XfhZoyxSszk Free laser settings library: l3daccessories.com/pages/settings-library #xTool #xToolStudio #LaserEngraving #shorts @xtoollaserukxTool Studio Tip #4: Resize Them All At Once (Batch Resize)Chris from L3D2026-11-11 | A sheet of stickers, all different sizes. One box fixes every one of them. Batch Resize in xTool Studio sets them all to the same width or height, or fits every one inside an exact box. Would this save you time? Want the rest of the new features? They're all in the full video. Watch it here: youtu.be/XfhZoyxSszk Free laser settings library: l3daccessories.com/pages/settings-library #xTool #xToolStudio #LaserEngraving #shorts @xtoollaseruk13 xTool Studio Tips Every Owner Should KnowChris from L3D2026-11-11 | 13 xTool Studio tips every owner should know, shown on the xTool F2 Ultra: faster jobs, better photos and fewer mistakes.
From tracing a QR code and smart scanning (the same job dropped from 2 min 15 s to 1 min 37 s) to auto adjust for photos, batch fill, default material settings, version history and the material test grid, each tip shows exactly where to click and the result on a real project. A full xTool Studio tutorial series is on the way, so subscribe if you'd like the rest.
If this helps you get more out of your laser, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
📺 Watch Next
• xTool Studio Update: 13 New Features You Need to See: youtu.be/XfhZoyxSszk • Every xTool Studio Processing Mode Explained (Which One to Use): youtu.be/SY9YZDAHqW8 • How to Do a Material Test in xTool Studio (Beginner Tutorial): youtu.be/gx6GPd0SRNc
💬 Which tip was your favorite, and which one was new to you? Let me know in the comments!
👥 More From L3D
• All my links, shop and socials: https://linktr.ee/l3daccessories
• Buy me a coffee ☕: buymeacoffee.com/chrisfromL3D
⏱️ Chapters
0:00 Intro
0:39 Tip 1
2:09 Tip 2
3:49 Tip 3
5:32 Tip 4
6:52 Tip 5
7:52 Tip 6
8:32 Tip 7
9:24 Tip 8
11:31 Tip 9
12:22 Tip 10
13:27 Tip 11
14:51 Tip 12
15:50 Tip 13
17:38 Final thoughts
#xToolStudio #xTool #LaserEngravingxTool Studio Tip #3: A Labrador In Sunglasses With Atomm AIChris from L3D2026-11-10 | I typed "a Labrador with sunglasses" into xTool Studio. This is what came back. Atomm AI now sits right on the Home tab, so a blank canvas doesn't have to stay blank. What would you ask it to make? The full video covers every new feature in the update. Watch it here: youtu.be/XfhZoyxSszk Free laser settings library: l3daccessories.com/pages/settings-library #xTool #xToolStudio #LaserEngraving #shorts @xtoollaserukEvery xTool Studio Processing Mode Explained (Which One to Use)Chris from L3D2026-11-09 | Every processing mode in xTool Studio explained, with real projects: flat surface, baseplate removed, rotary, slide extension, both batch modes, conveyor, curved material, embossment and inner engraving.
Find out where the modes live, why your list might look different from mine, and exactly which mode to reach for on your next project.
If this helps you get more out of your laser, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
📺 Watch Next • xTool Studio Update: 13 New Features You Need to See: youtu.be/XfhZoyxSszk • How to Do a Material Test in xTool Studio (Beginner Tutorial): youtu.be/gx6GPd0SRNc • xTool Studio Hidden Features That Change Everything: youtu.be/c1hSdthmAgY
💬 Which mode do you use the most, and is there one you've never tried? Let me know in the comments!
👥 More From L3D • All my links, shop and socials: https://linktr.ee/l3daccessories • Buy me a coffee ☕: buymeacoffee.com/chrisfromL3D
⏱️ Chapters 0:00 Intro 0:46 Where to find the processing modes 1:24 Process on flat surface 2:02 Baseplate removed 2:27 Rotary 3:21 Use slide extension 4:04 Same design batch processing 4:42 Different design batch processing 5:05 Conveyor 5:43 Curved material 6:53 Embossment 7:43 Inner engraving 8:22 Which mode should you use? 8:59 Guides and settings library 9:28 Thanks for watching
#xToolStudio #xTool #LaserEngravingxTool Studio Tip #2: Fit As Many As Possible With Auto FillChris from L3D2026-11-09 | How many can you actually fit on one sheet? Auto Fill in xTool Studio packs as many copies of one design onto your material as it can, with the spacing you set. How many would you fit on yours? I go through every new feature in the full xTool Studio update video. Watch it here: youtu.be/XfhZoyxSszk Free laser settings library: l3daccessories.com/pages/settings-library #xTool #xToolStudio #LaserEngraving #shorts @xtoollaserukxTool Studio Tip #1: Stop Placing Designs By Hand (Smart Nesting)Chris from L3D2026-11-08 | Still dragging every design into place by hand? Smart Nesting in xTool Studio now lays them all out on your material for you, spaced exactly how you want. Would you use it for stickers or wood? There are 12 more new features in the full update video. Watch it here: youtu.be/XfhZoyxSszk Free laser settings library: l3daccessories.com/pages/settings-library #xTool #xToolStudio #LaserEngraving #shorts @xtoollaserukxTool Studio Update: 13 New Features You Need to SeeChris from L3D2026-11-08 | Every new feature in the latest xTool Studio update, shown step by step on real projects: Smart Nesting with Auto Fill, Atomm AI, batch resize, community materials, the new material test grid, Passthrough for dithered photos and more.
Check your version first (Settings cog, then About xTool Studio), then follow along. Device-specific updates for the Omni, X1 and others aren't covered here: tell me in the comments if you'd like a video on those.
If this helps you get more out of your laser, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
📺 Watch Next
• How to Do a Material Test in xTool Studio (Beginner Tutorial): youtu.be/gx6GPd0SRNc • xTool Studio Hidden Features That Change Everything: youtu.be/c1hSdthmAgY • xTool Studio Just Got Better: 8 New Features You Need to See: youtu.be/SxHQoqgDPZ0
💬 Which of these updates will you use the most? Let me know in the comments!
👥 More From L3D
• All my links, shop and socials: https://linktr.ee/l3daccessories
• Buy me a coffee ☕: buymeacoffee.com/chrisfromL3D
⏱️ Chapters
0:00 Intro
0:29 Check your xTool Studio version
0:55 Smart Nesting and Auto Fill
2:24 Home Search and Atomm AI
3:40 Batch Resize
4:46 Directional Box Selection
5:39 Switch Origin
6:14 Community Materials
7:45 Material Settings on Home
8:25 Material Test Grid
9:36 Passthrough Image Mode
10:55 16-Bit Depth Maps for Relief
11:51 Full-Screen Sidebar
12:31 HEIC and DXF Import
13:08 Product Mockup Upgrade
14:12 Official release notes
14:30 Final thoughts
#xToolStudio #xTool #LaserEngravingxTool Apparel Printer Plus Setup: Box to First Print (Watch Before You Start)Chris from L3D2026-11-06 | The complete xTool Apparel Printer Plus setup, from two pallets in the hallway to the first DTF print pressed onto a tote bag. Every step in the right order, plus the mistakes I made so you don't have to.
Unboxing the printer and the OS1 shaker oven, lifting the printer on, the protective film, screws and roll holder brackets, loading and feeding the film, inks and moisturizing liquid, the hot-melt powder, extraction, the humidity module, the touchscreen setup, connecting xTool Studio, the first print and pressing it.
If this helps you get set up, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
💬 What are you planning to print first? Let me know in the comments!
👥 More From L3D
• All my links, shop and socials: https://linktr.ee/l3daccessories
• Buy me a coffee ☕: buymeacoffee.com/chrisfromL3D
⏱️ Chapters
0:00 What this video covers
0:39 Unboxing
2:05 Lift the Printer onto the Shaker
3:58 Remove the Protective Film
4:32 Screw the Printer to the Shaker
5:50 Fit the Roll Holder Brackets
7:39 Load the Film Roll
9:07 Feed the Film
10:53 Fill the Liquid and Inks
14:11 Add the Hot-Melt Powder
15:07 Fit the Tray and Extraction
15:40 Set Up the Humidity Module
17:15 Connect Cables and Power
18:03 Run the Touchscreen Setup
22:43 Connect xTool Studio
25:08 Make the First Print
26:35 Press It onto a Tote Bag
28:09 My verdict
#xTool #DTFPrinting #ApparelPrinterThis cat is carved into wood by a laser, not printed (xTool F2)Chris from L3D2026-11-06 | That's not a photo. It's carved into the wood, and you can actually feel it. A depth map tells the laser how deep to go, and it takes the wood away a layer at a time. This one took about an hour. Would you try 3D relief? All 10 of my xTool F2 settings are in the full video. Watch it here: youtu.be/SWtu8XJ-nWM Full 3D relief tutorial: youtu.be/RotKjOm_RIQ #xToolF2 #LaserEngraving #3DRelief #shortsWhy your blue laser wont cut clear acrylic (xTool F2)Chris from L3D2026-11-05 | Same laser, same settings. So why does black acrylic cut and clear acrylic doesn't? Clear acrylic lets the blue light straight through. It needs to be black, or at least a dark color, for a blue laser to cut it. Black or clear: which do you use? All 10 of my xTool F2 settings are in the full video. Watch it here: youtu.be/SWtu8XJ-nWM Free F2 settings: l3daccessories.com/pages/xtool-f2-laser-settings #xToolF2 #LaserCutting #Acrylic #shortseufyMake E1 UV Printer: Everything You Should Know Before You BuyChris from L3D2026-11-04 | A week with the eufyMake E1 UV printer: 3D textured magnets, a Starry Night relief coaster, a full wrap tumbler on the rotary, UV DTF stickers, metal cards, acrylic and leather with the flexible white ink. I measured the texture with calipers, tested the camera accuracy, timed the new bidirectional mode, checked the noise and went through the printer's own logs to see where the ink really goes.
If you're deciding whether the E1 is worth buying at the end of 2026, this covers the print quality, the software, the running costs and the things I'd want to know first.
⏱️ Chapters 0:00 Intro 1:18 What is the eufyMake E1? 3:09 Setup 4:11 The software 5:38 What I've made 10:00 Will it come off? 10:33 How accurate is it? 11:45 Is bidirectional really faster? 12:28 Ink, maintenance and running costs 15:13 Noise, smell and the fan kit 16:26 The bits I don't like as much 17:37 Little things I've noticed 18:14 Verdict
xTool finally brought their 16.5 m truck over to the UK, and they invited me and the family along. We made Arthur's name necklace on the F2 Ultra UV, cut a steel motorbike on the MetalFab, made Penny's keyring on the P3 and printed a family photo, and I asked Fang what it's like to drive the truck all over Europe.
💬 Have you seen the xTool truck yet? Where should it go next? Let me know in the comments!
👥 More From L3D • All my links, shop and socials: https://linktr.ee/l3daccessories • Buy me a coffee ☕: buymeacoffee.com/chrisfromL3D
⏱️ Chapters 0:00 xTool's laser truck finally comes to the UK 0:27 A day at the Forwards Festival in Bristol 1:54 Meeting Heather from xTool 2:20 Make 1: Arthur's necklace on the F2 Ultra UV 3:23 Make 2: A steel motorbike on the MetalFab 4:00 Driving a 16.5 m truck around Europe, with Fang 5:54 Inside the truck 6:04 Make 3: Penny's keyring on the P3 6:21 Make 4: A family photo print 6:37 The rest of the day
#xTool #LaserEngraving #ForwardsFestivalWhy I engrave this tumbler twice, with two different lasers (xTool F2)Chris from L3D2026-11-03 | Why would you engrave the same tumbler twice? The blue laser burns the powder coat off. A quick infrared pass then cleans up what's left, so the steel comes out bright silver instead of dull and patchy. Have you tried a clean pass? All 10 of my xTool F2 settings are in the full video. Watch it here: youtu.be/SWtu8XJ-nWM Free F2 settings: l3daccessories.com/pages/xtool-f2-laser-settings #xToolF2 #LaserEngraving #Tumbler #shortsYoud think slate is a blue laser job. It isnt. (xTool F2)Chris from L3D2026-11-02 | Most people reach for the blue laser on slate. On the F2, I don't. It's the infrared for both text and photos, and the photos come out light gray on the dark stone like a proper keepsake. Blue or infrared for your slate? All 10 of my xTool F2 settings are in the full video. Watch it here: youtu.be/SWtu8XJ-nWM Free F2 settings: l3daccessories.com/pages/xtool-f2-laser-settings #xToolF2 #LaserEngraving #SlateEngraving #shortsHow I get stainless steel properly BLACK with the xTool F2Chris from L3D2026-11-01 | Why does your stainless engraving come out gray instead of black? You're not cutting into the steel. You're heating the surface, slowly, and running it twice. That's what turns it properly black, and it never rubs off. What would you engrave black? All 10 of my xTool F2 settings are in the full video. Watch it here: youtu.be/SWtu8XJ-nWM Free F2 settings: l3daccessories.com/pages/xtool-f2-laser-settings #xToolF2 #LaserEngraving #StainlessSteel #shortsxTool X1 Workplate: I Wish Id Fitted This on Day OneChris from L3D2026-11-01 | The xTool X1 Workplate: what it is, how it fits, what it works with and who should get one. 🛒 xTool X1 Workplate (US, code L3D80): xtool.com/products/xtool-x1-workplate?ref=clipoxfr&utm_medium=affiliate&utm_source=goaffpro&utm_term=4965 ⚙️ Free laser settings library: l3daccessories.com/pages/settings-library?utm_source=youtube&utm_medium=description&utm_campaign=f80xX1Qn-6w
The workplate is a protective plate that sits on top of the X1's built-in base plate. It isn't a replacement. I unbox it, fit it, show you the one corner you need to watch, which accessories need it taken out (the RA3 rotary, screen printer and crystal alignment bracket) and how it works with the honeycomb panels and slats. I also show you what I did to my own base plate before it arrived. X1 Workplate price: $129 ($116 at launch).
💬 Are you fitting the workplate, or keeping your base plate as it is? Let me know in the comments!
👥 More From L3D • All my links, shop and socials: https://linktr.ee/l3daccessories • Buy me a coffee ☕: buymeacoffee.com/chrisfromL3D
⏱️ Chapters 0:00 What is the X1 Workplate? 0:43 Why it exists 1:33 Unboxing 2:12 A closer look 2:35 Fitting it 4:18 Honeycomb and slats 5:02 Who should get one
Black on stainless steel, a powder-coated tumbler, anodized aluminum, slate, glass, wood, cutting basswood, black acrylic, PU leather and cork, plus a bonus 3D relief carving. Every setting is on screen as I say it, so there's no need to write anything down.
⏱️ Chapters
0:00 The 10 settings I use most
0:49 How to read the F2 settings panel
2:00 1. Black on stainless steel
2:43 2. Powder-coated tumbler on the RA3
3:32 3. Anodized aluminum
4:34 4. Slate
5:19 5. Glass (paint method)
6:01 6. Wood
6:46 7. Cutting 3 mm basswood
7:15 8. Black cast acrylic
7:52 9. PU leather keychains
8:28 10. Cork
9:06 Bonus
9:39 Free F2 cheat sheet + full tutorials
10:26 Thanks for watching
#xToolF2 #LaserEngraving #LaserSettingsMy Best Photo Yet on the xTool X1, But Its Not PerfectChris from L3D2026-10-29 | My best photo yet on the xTool X1, but it's not perfect. 60W MOPA on a full 23.6 x 11.8 in sheet of black anodized aluminum, 1 hr 45 min to engrave after 2 days of test sheets. Did you spot the two issues?
#xtoolx1 #laserengraving #mopalaser #shorts @xtoollaserukxTool X1 Mobile Work Stand: Step-by-Step Assembly GuideChris from L3D2026-10-28 | Building the xTool X1 Mobile Work Stand from box to finished stand, then putting the X1 on top. Every step of the assembly in order, the parts and screws you need, the bits to watch out for, the optional storage shelves and conveyor feeder hooks, and my honest thoughts once the X1 is sitting on it.
If you're deciding whether you need the stand for your X1, this should show you exactly what you get and how long it takes to build.
💲 Launch Price
xTool X1 Mobile Work Stand: $341 launch price (normally $379), launch offer until Dec 6. xTool members get an extra 8% to 12% off depending on membership level.
If this helps you make your decision, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
Allen key (in the box), a Phillips screwdriver, and optionally an impact driver with a 5 mm hex bit to speed up the M6 x 16 bolts. Build time is under 20 minutes if you're not filming it.
👥 All my links, shop and socials: https://linktr.ee/l3daccessories
⏱️ Chapters 0:00 Intro 1:01 Unboxing and what's in the box 2:46 Step 1: End frames and short beams 4:09 Step 2: The long beams (B and C) 6:08 Step 3: Bolt the frame together 7:10 Step 4: Six board brackets 8:10 Step 5: The end boards 9:56 Step 6: Four more brackets 10:42 Step 7: Divider boards and storage options 12:11 Step 8: Fit the casters 13:21 Step 9: Stand it up 13:51 Optional: Conveyor feeder hooks 14:54 The X1 on the stand 16:19 Verdict
#xToolX1 #LaserEngraver #xToolPrint on the xTool O1 Omni, Cut on the C1?Chris from L3D2026-10-27 | Can you print stickers on one machine and cut them out on a completely different one? I honestly didn't know. 🤷 So I printed a sheet on the xTool O1 Omni UV printer to see if the xTool C1 could cut it. What would you print first?
#xToolO1Omni #xToolC1 #UVPrinting #shortsWhy my laser settings wont match yoursChris from L3D2026-10-26 | Why my laser settings won't give you the same results.
Material, coating, setup and even the batch of blanks change the result. Use settings as a starting point, then learn to adjust.
What material gives you the most trouble?
Want the other things I wish I'd known before buying my first laser? They're in the full video. Watch it here: youtu.be/_206gJu_qcs
#lasersettings #laserengraving #lasertips #shortsNo Registration Marks: Can the xTool C1 Find the Outlines?Chris from L3D2026-10-26 | There are no registration marks on this sheet. So how does the cutter know where to cut? 🤔 The xTool C1 scans stickers I UV printed on the xTool O1 Omni, then Capture and Trace goes looking for the outlines. Did you expect it to find them?
#xToolC1 #PrintAndCut #StickerMaking #shortsxTool C1: Print, Cut, PeelChris from L3D2026-10-25 | No separate printer, no scissors. So how did this sticker get here? 🤔 Printed and cut on the xTool C1, then straight off the sheet. Rate the sticker out of 10 👇
#xToolC1 #StickerMaking #PrintAndCut #shorts @xtoollaserukThe most important lesson in laser engravingChris from L3D2026-10-25 | The most important lesson in laser engraving? You're going to ruin a few things.
I still do. Every mistake teaches you how the machine and the material work together.
What's the worst thing you've ruined?
This is just one of five things I wish I'd known before buying my first laser. The rest are in the full video. Watch it here: youtu.be/_206gJu_qcs
#laserengraving #lasertips #maker #shortsPrinted on the xTool O1 Omni, Cut on the C1: The Live PeelChris from L3D2026-10-25 | Printed on one machine, cut on another. So did the cut line up? 👀 I peeled it live on camera: stickers UV printed on the xTool O1 Omni, cut on the xTool C1. Would you have trusted it with your stickers?
#xToolC1 #StickerMaking #PrintAndCut #shortsxTool O1 Omni + C1: UV Print on One, Cut on the Other?Chris from L3D2026-10-25 | After my xTool C1 unboxing, loads of you asked the same question: can you UV print stickers on the xTool O1 Omni and then cut them out on the C1? I didn't know the answer, so I tried it, start to finish, and filmed the whole thing, including the peel.
I print a sheet of sparkle sticker paper on the O1 Omni (two white, one color, one gloss varnish), scan it on the C1, trace the outlines in xTool Studio and let the C1 cut them.
💸 Get the xTool C1
If you're thinking of getting one, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
👥 All my links, shop and socials: https://linktr.ee/l3daccessories
⏱️ Chapters
0:00 Can the C1 cut what the O1 Omni prints?
0:36 UV printing the stickers on the O1 Omni
1:00 Setting up the print in xTool Studio
2:13 The 28 minute print
2:33 Onto the C1 cutting mat
3:10 Loading the C1
3:59 Scanning the print on the C1
4:40 Capture and Trace
6:20 Full cut and material detection
7:14 The C1 cuts
7:49 The moment of truth
9:14 Final thoughts
#xToolC1 #xToolO1Omni #StickerMaking @xtoollaserukxTool C1 Scans Your Paper Before It PrintsChris from L3D2026-10-24 | Why does this cutter want to see your paper before it prints? 👀 The xTool C1 scans the sheet as it loads, so you can place your design right on it. Would you use this for stickers or labels?
#xToolC1 #StickerMaking #PrintAndCut #shorts @xtoollaserukThe best thing I did after buying my first laserChris from L3D2026-10-24 | "What do I actually do with this thing?" That was me with my first laser.
Online communities helped me more than anything. Join a few before you even buy.
Which group has helped you most?
Finding a community is just one of five things I wish I'd known before buying my first laser. The rest are in the full video. Watch it here: youtu.be/_206gJu_qcs
#laserengraving #laserengraver #beginnertips #shortsxTool C1: From the Box to My First StickersChris from L3D2026-10-24 | How do you get from a sealed box to finished stickers in one evening? ✂️ The xTool C1 scans, prints and cuts in one machine, and this was my first go. What would you make first?
#xToolC1 #StickerMaking #PrintAndCut #shorts @xtoollaserukxTool C1 Color Cutter: Unboxing, Setup and My First StickersChris from L3D2026-10-23 | Unboxing the new xTool C1 Color Cutter, setting it up from scratch and printing and cutting my first full-color stickers. It scans, prints in CMYK and cuts, all in one machine, and I'd never used a cutting machine like this before.
▶️ Can the C1 cut stickers UV printed on the xTool O1 Omni? I tested it here: youtu.be/gUF3VJV2jwc
Everything that comes in the box, the setup and calibrations, and a first sticker project from start to finish, so you can see how easy it really is.
💸 Get the xTool C1
If you're thinking of getting one, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
👥 All my links, shop and socials: https://linktr.ee/l3daccessories
⏱️ Chapters 0:00 My first stickers off the C1 0:52 Unboxing the xTool C1 1:36 The starter material pack 2:12 First look at the machine 2:40 Cables, plug and toolkit 4:04 Everything in the box 5:12 Ports and power 6:34 Connecting to xTool Studio 6:58 Installing the ink cartridge 7:51 Moisturizing sponges 8:30 Blade pressure calibration 9:43 Machine accuracy calibration 10:09 Automatic calibrations 10:40 First project: sticker generator 12:03 Loading and scanning the paper 13:46 Printing and cutting 14:29 Peeling the stickers 15:03 My first thoughts
#xToolC1 #ColorCutter #StickerMaking @xtoollaserukTry the laser software before you buy the laserChris from L3D2026-10-23 | Most people never try the software before they buy the laser. Big mistake.
xTool Studio and others are free to download, and LightBurn has a free trial. Have a look around before you buy.
Which software do you use?
Software is just one of five things I wish I'd known before buying my first laser. The rest are in the full video. Watch it here: youtu.be/_206gJu_qcs
#laserengraving #xToolStudio #LightBurn #shortsCreality Falcon T1: I Tested the Fiber, UV and Diode Modules in One LaserChris from L3D2026-10-23 | One machine, three lasers. I spent three weeks with the Creality Falcon T1, swapping between the 20W fiber, the 5W UV and the 20W diode modules, and put all three through real jobs: a 3D relief coin in brass, photos engraved inside crystal, UV on wood, plastic and glass, and a camera accuracy test on the diode.
If you are weighing up a T1, this should tell you what each module actually does, where the software still needs work, and whether one modular galvo really can replace three machines.
Ready to check out the Creality Falcon T1?
Learn more and grab yours via my affiliate link below 👇
👥 All my links, shop and socials: https://linktr.ee/l3daccessories
⏱️ Chapters
0:00 Intro
0:55 What is the Falcon T1?
2:11 Setup
2:58 The module swap
4:04 Fiber
5:35 UV crystal engraving
6:54 UV on wood, plastic and glass
8:50 Diode and the camera
9:58 The software
12:18 The honest bit
14:16 Verdict and price
#Creality #CrealityFalcon #FalconT1 #LaserEngraverThink about this before you buy a laser engraverChris from L3D2026-10-22 | Before you buy a laser engraver, ask yourself where it's going to live.
Enclosure, laser class, fumes, extraction, eye protection and fire risk all need thinking about before it arrives.
Where's yours set up?
Want the rest of what I wish I'd known before buying my first laser? It's all in the full video. Watch it here: youtu.be/_206gJu_qcs
#lasersafety #laserengraving #laserengraver #shortsxTool M2 Laser Module Showdown: 10W vs 20W vs 3W IR Photo on SlateChris from L3D2026-10-21 | 10W vs 20W vs 3W IR: I tested every option on the xTool M2 to find the best laser for engraving photos on slate. Each module got its own full test, from a broad test grid to line density, then the same photo on the same slate coaster.
Can you tell which coaster came from which laser? Make your guess in the comments before the reveal.
💸 xTool M2 + Laser Modules
If this helps you decide which module to get, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos! Use code L3D80 to save.
⏱️ Chapters 0:00 Three coasters, three lasers 0:52 Why I tested this 1:22 Keeping it fair 1:54 Step 1: the broad test grid 2:33 How to read a test grid 3:08 Step 2: narrowing it down 3:27 Step 3: line density 3:47 The winning settings 4:22 Make your guess 4:34 Looking at them blind 5:01 The reveal 5:29 Why they're so different 5:55 The viewing angle test 6:12 How long each one takes 6:32 Slate tips for any module 7:14 My verdict and scores
#xToolM2 #LaserEngraving #SlateEngravingI almost bought an old CO2 laser off the internetChris from L3D2026-10-21 | I almost bought an old CO2 laser I found online. It would have been a mistake.
I hadn't thought about the size, the maintenance, or whether it even suited my materials.
Have you ever nearly bought the wrong machine?
Want to know what I'd check before buying any laser? It's all in the full video. Watch it here: youtu.be/_206gJu_qcs
#laserengraving #CO2laser #beginnertips #shortsTriple Every Print Run on the xTool O1 Omni UV Printer #shortsChris from L3D2026-10-20 | What if your xTool O1 Omni could fill the whole bed in one print run?
The new Omni Bracket System XL clips onto the O1 Omni's Standard Baseplate (330 x 420mm) and holds any three L3D Omni jigs side by side. Business cards, slate coasters, challenge coins, keychains: load three jigs, scan once in xTool Studio and print every blank in one pass.
Which three jigs would you load first? Tell me in the comments.
#xtool #o1omni #uvprinter #shortsGalvo vs gantry laser engravers explainedChris from L3D2026-10-20 | Galvo or gantry? Most beginners don't know the difference.
Galvos are fast and compact with a small working area. Gantries give you room to cut and make bigger projects, but take up more space.
Which one do you have?
That's just one of five things I wish I'd known before buying my first laser. The rest are in the full video. Watch it here: youtu.be/_206gJu_qcs
#laserengraving #galvolaser #laserengraver #shortsxTool X1 MOPA: I Turned Flat Brass Into a 3D PlaqueChris from L3D2026-10-19 | Embossing a solid brass plaque on the xTool X1 with the 60W MOPA, from a generated image to a finished antique relief. I show you how I turned the design into a depth map, set it up in xTool Studio, the settings I used, the job itself and how I finished it.
If you're still deciding on an X1, this should give you a better idea of what the MOPA can do on metal.
💸 The xTool X1 Is Out Now!
If this helps you make your decision, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
Create a highly detailed monochrome grayscale bas-relief artwork designed as source art for a 3D depth engraving on a [100 x 60 mm rectangular brass plaque].
The main subject is [a grand fantasy gothic castle with tall spires, turrets, battlements, arched windows, a large central entrance and layered stone architecture].
Include a secondary subject: [a large dragon coiled around the castle, its body wrapping through the towers, wings spread behind, head leaning forward], fully inside the frame.
Make the composition dramatic, balanced and richly detailed, with the focal point in the center. Add a few supporting elements: [rocky cliffs, a stone bridge, distant mountains, clouds and small carved trees].
Surround the scene with [an ornate baroque raised border frame with carved scrollwork and corner flourishes]. Keep every major element inside the frame.
Style it like a sculpted antique relief plaque: strong layered depth, smooth height transitions, bold readable forms and rich carved detail. Use a dark recessed background and lighter raised foreground surfaces so the depth is clear. Make it look like a relief sculpture, not a photograph or painting, with broad sculpted surfaces and fine detail only where it stays readable.
👥 All my links, shop and socials: https://linktr.ee/l3daccessories
⏱️ Chapters
0:00 Why the X1 for brass embossing
1:25 Dust hood and setup
2:03 AI image to depth map
3:00 Setting it up in xTool Studio
4:48 Embossing on the X1
6:20 Blackening and the reveal
#xToolX1 #LaserEngraving #MOPAI nearly bought the wrong laser engraverChris from L3D2026-10-19 | I nearly bought the wrong laser engraver. Here's what I'd do first.
Write down what you actually want to make. Diode, infrared, fiber, CO2 and UV lasers all suit different materials.
What was your first laser?
That's just one of five things I wish I'd known before buying my first laser. The rest are in the full video. Watch it here: youtu.be/_206gJu_qcs
#laserengraving #laserengraver #beginnertips #shortsWhich xTool X1 version should you buy?Chris from L3D2026-10-18 | Thinking about the xTool X1? Don't pick the wrong version.
The UV, MOPA and fiber add-ons all run through the diode galvo, so the CO2 + diode galvo version is your route to adding them later.
Which version are you leaning toward?
Still deciding? I go through what the X1 can do in the full video. Watch it here: youtu.be/efcp0VF44Ns
Buy the X1 with my affiliate link (supports the channel at no extra cost to you): social.xtool.com/3TUyER0
#xToolX1 #laserengraver #xtool #shortsxTool X1: I Engraved a Tumbler With the RA3 RotaryChris from L3D2026-10-18 | Engraving a powder-coated tumbler on the xTool X1 with the RA3 rotary, start to finished piece. I show you what you need to fit the RA3, how I lined up the design, why a CO2 laser is so good for tumblers, and how it came out.
If you're still deciding on an X1, this should give you a better idea of what it can do.
💸 The xTool X1 Is Out Now!
If this helps you make your decision, I'd really appreciate you using one of my links below. It helps support the channel and lets me keep making these videos!
👥 All my links, shop and socials: https://linktr.ee/l3daccessories
⏱️ Chapters 0:00 The finished tumbler 0:40 What you need to fit the RA3 3:00 Loading the tumbler 3:13 Lining up the design 5:16 Why CO2 is so good for tumblers 6:25 Cleaning it up 6:48 How it came out 7:33 Final thoughts