[106] Package from MrBlack-Magic and CL from K1LOCKS Culper Woodhull 2022-02-15 | I finally received a Dom IX Twinstar, sent to me from MrBlack-Magic. I found some goodies inside, along with a CL from K1LOCKS that I decided I'd give a go. Big thanks for sending this my way.Edit: there is also threading in the 1st driver chamber of the bible.
(102) Yuema 750 Defeated by Photo of Key Culper Woodhull 2021-11-20 | The Yeuma 750 is still considered unpicked, but there is a way to get around it. If you own one of these locks, make sure you don't display your keys. A simple photo will do to make a set of nearly identical "rake-keys" ...and if you're better than me, probably perfect. Mine required a bit of raking. Also, I can see these being 3D printed/resin cast as well. CaptainHookNumber1 has a great video on decoding and making keys for these locks.Where the methods may seem similar, they are quite different.
[101] Miwa EC Model E6 Picked and Gutted Culper Woodhull 2021-11-02 | The Miwa EC model e6 adds six dimple pins with tight tolerances. After overcoming them, a locksporter can then manipulate the magnetic wafers. Though reminiscent of the Anker/Miwa 3800, the Miwa EC model e6 repels the magnetic wafers out of the plug. I found this challenging to pick in the housing due to the spring mechanism that prevents a locksporter from reaching the back of the lock unless forced back under spring tension; it made manipulating the magnetic wafer in the seventh chamber on the left side daunting, as it interfered with the particular noises one learns to listen distinguish from others when using a transducer method. Because of this knowledge, I decided to pick it in the housing for a more authentic pick.00:00 Intro3:10 picking begins 8:27 Dimples Picked & Pick Magnetic Wafers15:11 Drop Dimple Pins16:00 Repick Dimples & Start Picking Magnetic Wafers18:57 Drop Dimples Again21:00 Repick Dimples & Start Picking Magnetic Wafers27:48 Picked29:35 Dissaembling Housing Begins31:06 Housing Dissasembly Complete31:41 Gutting Core Begins43:47 Gutting Core Complete With All Parts Accounted For43:56 Close-ups Begin Starting with Plug44:45 Shell45:44 Magnetic Wafer Outer Chambers46:30 Close up of Gutting Tray, Pins, Springs, Magnetic Wafers, etc.
[100] Anker (Miwa) 3800 Picked & Gutted Culper Woodhull 2021-10-19 | This was a difficult magnetic/dimple lock. I had a heck of a time discerning whether or not the pins were set before moving on to the magnetic wafers. And to make things even worse, it constantly snagged on the serrated "fins" of the wafers. This lock was sent to me by m0g from Canada. I received it today and finally got it opened after spending about 8 hours on it. I took many video attempts and finally got it. It was worth all the time put into it. Thanks, m0g!
[99] Miwa Magnetic Picked and Gutted Culper Woodhull 2021-10-16 | The Miwa Magnetic is a neat little lock, with three magnetic sliders that can be defeated with a bit of practice, magnets, and superglue.
[98] Yale Superior 9-pin, 4-slider Picked & Gutted & Explored Culper Woodhull 2021-10-12 | The Yale Superior comes in seven or nine pins, with four sliders. This would be considered an entry-level lock into high-security locks, sporting two separate lock mechanisms. This particular lock sports nine pins populating the keyway in alternating anglers to deter teh picker, with four sliders to tackle after picking the pins. I didn't spend much time with this lock and don't consider this a rehearsed pick.
[97] Banham m2002 Picked & Gutted Culper Woodhull 2021-10-09 | The Banham m2002 was a strange lock to pick and was quite the challenge. It has six sets of pins that need to be picked in a particular way that it took me a bit to wrap my head around it.
[96] Burg-Wächter Alpha 800 Picked Culper Woodhull 2021-10-09 | I've had the German-made Alpha 800 since September of 2019 and could never manage to open it. After watching AMonitorDarkly's video on it, everything clicked. Check out his video here: youtube.com/watch?v=bfB8JWHGqqI
[95] DOM ix Saturn Picked & Gutted Culper Woodhull 2021-10-08 | Having been shelved for nearly a year, I finally picked and gutted this unique lock. The DOM ix Saturn is a high-security, 10-pin dimple lock with shark fin pins (except for the interactive pin) to deter picking. The pins, both driver and key, are quite remarkable. The Saturn's predecessor was the DOM ix 10 with shark fin pins and its successor, the DOM ix Twinstar.
[94] EVVA Dual Picked & Gutted Culper Woodhull 2021-09-22 | The ICS' predecessor has long been on my list of locks to pick. The EVVA Dual is the final lock I needed to capture on video to claim I've defeated all Black Belt EVVA locks within the LPU belt ranking system. The Dual is an incredibly difficult lock that requires patience and dedication. I'm happy to have finally picked it for any and all to see.
[93] I go to to prison after picking prisoners handcuffs Culper Woodhull 2021-09-13 | I picked some handcuffs...and it went a little sideways after.
The all new Alpha lock...check it out! Culper Woodhull 2021-08-30 | This is a Digs' promo video for his lock company found at www.Digbylockandtool.com -- He's made an insane lock, called the Alpha, the first edition in his line up of locks he has planned to make (fun fact--the predecessors will be named chronologically with the phonetic alphabet). The first person to pick the Alpha on video will get quite the prize. I've already preordered. If I'm not the first, at least I can say I've got one of these limited locks in my collection. Preorder while you can!
[92] New Mako M-2, 7 Pin, v2 Review Culper Woodhull 2021-05-21 | Today I received the new Mako M-2, 7-Pin Version 2, sporting a new Keyway. In this video, we will discuss a few of Mako Locks' previous models and see if I can pick to either operating or control.
[91] American Lock 1100 picked one handed & left handed (non-dominant) Culper Woodhull 2021-04-11 | I'm forced to use my non-dominant, left hand and a rubber band to pick the American Lock 1100. I had a biceps tenodesis of the long head tendon on 1APR2021 and was diagnosed with a DVT (blood clot) in the right arm yesterday. Locksport has continued to be therapeutic, even post-op. The camera died partway through, but you can see withdrawing my hand from pick when I noticed it was about to die and everything is as I left it when I plugged in the power cable and began to record again.#locksport #pickonehandrubberband
[90] WSW W10 5 Slider, 6 Pin padlock picked and gutted Culper Woodhull 2021-02-28 | Reminiscent of the EVVA ICS, the WSW played ping-pong like the devil. This was a semi-rehearsed pick, and I feel having picked the ICS helped a bit with defeating this lock. Though the WSW is definitely a lock of its own.
[89] VSR 14 Pin Picked and Gutted Culper Woodhull 2021-02-28 | A high count dimple lock with three rows, 14 pins, and t-pins.
[88] Mako M2 Limited COVID-19 Core Picked to Operating Blind Culper Woodhull 2021-01-23 | I could not get to control on this lock. I'll settle for operating. Very difficult lock to begin with. (Picked 2AUG2020)
[87] Mako Lock 425 LOTO Twin Pack Picked & Gutted Culper Woodhull 2020-08-24 | Today I received a twin pack of Mako 425s in the mail and decided to tackle both. Fun locks to pick and great to see Mako Locks expanding their line up.
[86] DOM Plura Picked & Gutted Culper Woodhull 2020-08-20 | This was a more difficult lock than I'd thought. The barrels in the DOM Plura make it very difficult to pick.
[84] Loto Lock Series 6 of 6 with 2B Picks, Unboxing, and Giveaway Requirements Culper Woodhull 2020-08-11 | Master 410 6 of 6 picked. I am officially announcing the giveaway. I'd like to thank 2BDCy4D for donating a beautiful-homemade pick to share with the locksport community. Also, Charles Builds Crap - or- The Lock Sportscast for helping me coordinate this giveaway. Sorry I was in a hurry, but to reiterate the giveaway requirements:- Like- Subscribe- Comment- Make a video picking any lock on your own Youtube account- #2Bpickgiveaway must be in your video title so I can find itBe well, everyone, and thanks for stopping in.The Lock Sportscast can be found here:thelocksportscast.comor on YT here:youtube.com/channel/UCYmcilCD4aR0wWTISIXOgKg#lotolocktuesday #lockpicking
[83] Charles Builds Crap Package then the Abus 83/45 and I have a Battle Culper Woodhull 2020-08-10 | Today I received a mail call from Charles Builds Crap / The Lock Sportscast giveaway...and I barked up the wrong tree for a pick-out-of-package. The Lock Sportscast can be found here: youtube.com/watch?v=oUw9QL38v7MCharles' channel can be found here: youtube.com/channel/UCfFT2uibPuoj_Vq8uzGUN-w
[82] Loto Lock Series 5 of 6 with 2B Picks Culper Woodhull 2020-08-04 | Sorry, I forgot to upload this when I got done earlier. Here, I tackle lock 5 of 6.And as always, check out The Lock Sportscast below to stay up-to-date with locksport news from around the community and maybe some inside info on giveaways.thelocksportscast.com#lotolocktuesday #locksport #lockpicking
[81] Medeco Original Giveaway! Culper Woodhull 2020-07-29 | Thanks to everyone who participated in the giveaway, and a big thanks to The Lock Sportscast.The Lock Sportscast and can be found here: thelocksportscast.com Download Podbean to be able to, not only listen on Android and IOS but to leave your comments.#locksport #lockpicking #medeco
[79] Loto Lock Series 4 of 6 with 2B Picks, and Electric Tape Culper Woodhull 2020-07-28 | This is the fourth video in my loto lock and custom 2BDCy4D pick giveaway. After I picked the 6th one I will make it clear on what the give away criteria will be. The Lock Sportscast has more info on that, so check out Episode 8.- 2BDCy4d (To Be Decyphered) can be found on Lock Picker's United (LPU) Discord. He makes beautiful picks, and just yesterday, I finished making one of my own to gift him in return for being part of this giveaway, making me multiple picks, and for just being a good friend.- Charles Builds Crap's podcast, The Lock Sportscast, can be found here: thelocksportscast.comCharles is always open to any news in the locksport community. If you have any interesting news to share, or maybe have a giveaway of your own going, contact him here: podcast@thelocksportscast.com#lotolocktuesday #locksport #lockpicking
[78] Loto Lock Series 3 of 6 with 2B Picks Culper Woodhull 2020-07-21 | This is the third video in my loto lock and custom 2BDCy4D pick giveaway. After I picked the 6th one I will make it clear on what the give away criteria will be.- 2BDCy4d (To Be Decyphered) can be found on Lock Picker's United (LPU) Discord.- Charles Builds Crap's podcast can be found here: thelocksportscast.comCharles is always open to any news in the locksport community. If you have any interesting news to share, or maybe have a giveaway of your own going, contact him here: podcast@thelocksportscast.com#lotolocktuesday #locksport #lockpicking
[77] Medeco Biaxial Picked & Gutted Culper Woodhull 2020-07-20 | Finally! I finally picked this on video to seal the deal. Medeco locks are definitely some difficult picks, especially if you have low bitting, which can make it incredibly difficult to rotate the pins to engage with the sidebar. I have more Medeco locks I plan to pick in the future.As mentioned in the video, be sure to check out Charles Builds Crap's podcast. It might contain some interesting info for this video...hmm...It's called The Lock Sportscast and can be found here: thelocksportscast.com Download Podbean to be able to, not only listen on Android and IOS, but to leave your comments.#locksport #lockpicking #medeco
[76] #Butchers156Giveaway Lockwood 334M45 & American Lockwood picked Culper Woodhull 2020-07-15 | This is an entry video for The Butcher’s bLock giveaway. I'm obsessed with Lockwoods, and I've picked mine till it's nearly half working. Usually, giveaways, if I don't need them, I will nominate someone to take my spot in the drawing. But these are Lockwoods...I have to try.If you aren't already, subscribe to his channel here: youtube.com/channel/UCrGqNpP1QmopI8NH2W5Su-w#locksport #lockwood #lockpicking
[75] Loto Lock Series 2 of 6 with 2B Picks Culper Woodhull 2020-07-14 | This is the second video in my loto lock and custom 2BDCy4D pick giveaway. After I picked the 6th one, I will make it clear on what the give away criteria will be.- 2BDCy4d (To Be Decyphered) can be found on Lock Picker's United (LPU) Discord.- Charles Builds Crap YT is here: youtube.com/user/MrCharlesCurrentHis podcast can be found here: thelocksportscast.comI failed to mention Charles is always open to any news in the locksport community. If you have any interesting news to share, or maybe have a giveaway of your own going, contact him here: podcast@thelocksportscast.com#lotolocktuesday #locksport #lockpicking
[74] Giveaway announcement, 2B Picks and Loto Lock Series 1 of 6 Culper Woodhull 2020-07-07 | Cherokee had a great idea and decided to follow suit. This is the first video in my loto lock giveaway. After I picked the 6th one, I will make it clear on what the give away criteria will be.2BDCy4d (To Be Decyphered) can be found on Lock Picker's United (LPU) Discord.
[73] #Pick4Jim Entry Video Master 911 Culper Woodhull 2020-07-03 | I came across this giveaway on Reddit and checked it out. I think the locks and picks will be a great start-up for a new picker. I am now subscribed to Georgia Jim and want to, if I win the drawing and if it's okay with Jim, to donate this entry to someone who is new to Lockport. I'll give Jim the details of the person if I happen to win. Either way, Congrats on 100 subscribers, Jim!Check out Georgia Juims's channel here: youtube.com/channel/UCd2U2lOG9BE3Alh_KJ4lKLAMy first time struggling with the Master 911 here: youtu.be/W5yr5pczPCQ#locksport #lockpicking
[72] EVVA MCS 2nd Gen Picked & Gutted & Destroyed Culper Woodhull 2020-06-30 | This was truly bittersweet. It was the longest I have ever picked any lock in one sitting, putting me at 1hour 37 minutes and 7 seconds. After I made the open, it all went downhill from there. Due to my inexperience with this lock, I thought I had bricked the lock during the gutting process. On top of that, my video memory was filling up and I had to switch to my phone camera which started to lose battery and had to switch back after I deleted some files to give me some time to keep the video going. Had I not been under so much stress, I may have not gone about this the way I did. But, I felt I had bricked the lock, and to me at the time, I had to do whatever it took to prove that I picked the lock.I give credit for teaching me how to pick this lock to Lockfall Laboratories who is a great guy and mentor and can be found here: youtube.com/channel/UC0hS4z3VCga51rgb0uE44qw#locksport #evvamcs
[71] Medeco Duracam picked and half gutted Culper Woodhull 2020-06-28 | I've had this on loan for months from a friend. With the 'sweeping' method he taught me paired with the realization that these were biaxial pins (thanks to Samurai w/ LPU), I finally got it opened.
[70] KeyMark Speed Pick Culper Woodhull 2020-06-22 | After learning the lock, the SSDev picks make short work of the KeyMark.
[69] KeyMark by Medeco Picked and Gutted #Cherokeeloto8 Culper Woodhull 2020-06-21 | This pick is for Cherokee's loto8 giveaway and I am nominating Notl. I've tried to get this lock several times but just couldn't get there with my .025 picks. I received some SSDeVs for Father's Day in .015, and it did the trick. I highly recommend having the SSDeV Hooks from Sparrows in your arsenal.#Cherokeeloto8 #locksport
[68] Yale 1963+ Padlock Picked Culper Woodhull 2020-06-21 | Happy Father's Day! I woke to some awesome gifts from my children, a cool coffee mug, and some lockpicks that I've been needing. I decided to pick a Yale padlock I found for two dollars at a local shop. Not sure of the model, but if anyone can identify it, please let me know. Markings on shackle say, "EATON, YALE & TOWNE INC" and "MADE IN USA" On top of the lock body, beneath the shackle, it reads, "SUPER PIN TUMBLER" and "LUBRICATE WITH GRAPHITE"#stocklocksunday #locksport # lockpicking
[67] Medeco Biaxial on Video Culper Woodhull 2020-06-07 | I spent all morning on the Medeco Biaxial and thought I'd share with you the reality of lock picking.#medeco #locksport
[66] EVVA ICS Picked and Gutted Culper Woodhull 2020-05-23 | The EVVA ICS was probably one of the most frustrating locks I've come across. Very difficult. Glad I was able to get my first pick on camera.EDIT: One of the three security drivers was actually slightly tapered. So not all were standard as I originally stated.#locksport #Lockpicking
[65] Handcuff & Lock Challenge for Monkey Lockpicks 300 subs Culper Woodhull 2020-05-20 | Congratulations to Monkey Lockpicks for reaching 300 subscribers. I am now subscribed to him but won't add this to the entry. I feel jumping on a giveaway and you don't know someone, a bit uncomfortable. I did find the challenge he presented for the entry very intriguing. I had to try it.#locksport #lockpicking #handcuffs
[64] Beautiful Picks from 2BDCy4D Culper Woodhull 2020-05-20 | 2BDCy4D (To Be Deciphered) sent me out a real treat. I now own three of his picks and I'm afraid to touch them. Thanks, 2B!#locksport #lockpicking #customlockpicks
[63] American 700 Picked and Gutted Culper Woodhull 2020-05-17 | First time with an American 700. Fun pick.#stocklocksunday #locksport #lockpicking
[61] MT5+ Picked and Gutted Culper Woodhull 2020-05-07 | This was a rehearsed pick, but it doesn't mean that it was easy. I picked it a few times in December before I stopped picking due to various reasons. Recently, I've picked it twice more, and this lock has been frustratingly camera shy for about a week. I'm glad I was finally able to get it on camera and put it on the trophy shelf.I haven't been around for a bit and just found out about Cherokee. She has a great channel here: youtube.com/channel/UCnSokziuwua-sT90bBhsVIALockPickingKid and I wish you the best and get well soon.#GetWellCherokee #lockpicking #locksport
[60] How to Open an ASSA Desmo with 8 Sliders Culper Woodhull 2020-02-25 | I was asked to help someone who has been having difficulties getting this lock opened, and I feel they stem more from the medical issues involved as opposed to their aptitude. So, in the video, I try to be as informative as possible so that anyone can benefit from this video if they are new to the lock or are having a hard time successfully picking. Please, feel free to comment below if I missed something, said something incorrect or anything that comes to mind to help anyone with getting this lock under their belt. Take care!#BrainTumorAwareness
[59] Squire SS50C P5 Picked and NOT Gutted Culper Woodhull 2020-02-21 | I've been having trouble with a rotator cuff injury that refuses to go away. I had to relocate to be able to pick this lock as comfortable as I could. Since this is my first video since I've disappeared, I wanted to make sure it was a special lock. This beast of a lock, the Squire SS50C P5, was gifted to me from Southampton Lock Picking Club, along with some other goodies that I will circulate throughout the locksport community. Thank you so much again for your generosity and constant support in our community. I've picked this lock just a few times, though this is also not rehearsed, as it has been a while since I've picked a lock. What a trophy to have on the shelf. I hope the locksport community is doing well. I'll be dropping in to visit some channels soon. I'm sure many will agree with me that if you're not subscribed to Southampton Lock Picking Club, you're missing out. Check them out here: youtube.com/channel/UCIBDaPaoP3nbaT8UsoQ3rIQ
[58] Details on our upcoming 100 SUBSCRIBER GIVEAWAY! Culper Woodhull 2019-12-04 | LockPickingKid and I were excited today when we finally got our 100 subscriber giveaway prize in order. We hope we did well for our first giveaway and hope that anyone in the locksport community could benefit from this. EDIT: I forgot to mention when the drawing will be. It will be on LockPickingKid's channel and sometime after the holidays in January. So just stay tuned and take care.
[57] SOUTHAMPTON LOCK PICKING CLUB Mail Call! Culper Woodhull 2019-11-28 | SHLPC has told LockPickingKid and me to be expecting a package, but their generosity still caught us off guard. Thank you so much! Also. sorry again to the locksport community for our absence. I have not been feeling well lately and may need a bit more time to recover, but I had to make a video for our friends over at SHLPC who have been major supporters of both our channels. I really hope I'll be getting back to visiting your channels soon.#locksport #lockpicking
![[34] ASSA DESMO 8 Slider Picked](https://i.ytimg.com/vi/fu8ieTFwcOU/hqdefault.jpg)