Pictures on Audio Tape - No Joke!CoolDudeClem2026-11-20 | Pictures on Audio Tape - No Joke!Making a Tesla coil Driver pt 1 - The interrupterCoolDudeClem2024-05-13 | Yes I'm back. After many sunny days delaying me further and further, making it hard to sleep at night and then sapping what little energy I have during the day, the title basically says what the video is about. So I've designed my own Tesla coil circuit but I thought I would start with the interrupter (which is based on one of Steve Ward's circuits), and in the next video I will be doing the high frequency stuff.
I don't know when the next video will be, maybe one day the weather will not be sunny and hot and I'll have the energy and motivation to make one. God I am so depressed, I hate this world. Why was I born? I wish I had never existed. I wish I was young again, I feel like I wasted my whole life here on YouTube.
Honestly I dont know why people say England has rain all the time and very few sunny days, it's the opposite. I live there and all I ever get is SUN. Just sun all the time with very few cloudy or rainy days. I'm sure the sun would even come out at night to piss me off even further if it thought it could. God I HATE SUN! Sun puts me in a terrible mood (as I am right now due to the RELENTLESS sun) and It does NOT co-ordinate with my introverted ways and my quiet creative inner state. Also when it's sunny all the assholes that live round here decide that IT'S PARTY TIME! They think that because the sun is out it's time to be noisy, I'm sure they think "The sun is shining, lets make lots of noise and annoy Cool Dude Clem because the sun is out, he has to have his window open for ventilation so he'll hear us! Let's all yell and scream at the top of our voices to annoy Clem! Let's blast music at top volume to annoy Clem! Let's do lots of noisy DIY to annoy Clem! Let's make the dog bark all day to annoy Clem! I'm gonna breed the most cooing pigeons ever to annoy Clem even MORE! He's such a sad spastic wanker!" This whole world is against me I'm sure it is.Experimenting with tube oscillator circuits for plasma flame generator (but no flames yet)CoolDudeClem2024-04-13 | Yes I am re-visiting it, I'll cut to the chase that you wont be seeing any breakout in this video. This is literally just testing a couple of circuits, with various different coils and tube configurations to see what gives the best result. THEN in the next video about this I'm going to take the best result and see if I can get anything out of it.Some ideas for future tesla coil videosCoolDudeClem2024-03-25 | After a lot of thinking I've come up with a few experiments I want to try. I have no idea how well they will work but either way I think it will be interesting.Need help on GU-50 plasma flame circuit.CoolDudeClem2024-03-20 | I honestly don't know WHY it doesn't work. I'm gonna be totally honest here, I'm not as smart as I pretend to be. I'm a dumb ass.Testing the coil I made with a Tesla coil circuitCoolDudeClem2024-03-04 | Okay, well you come up with a better title! Arcs start at 9:54. So anyway I decided to test that new coil I would and see how well it works, using an old circuit I stated making a long time ago but never finnished making it untill now.
To be honest I'm not happy with how this turned out, it should have been much better.Gate Drive TransformersCoolDudeClem2024-02-22 | Because someone wanted it, here is an in-depth tutorial on making and testing gate drive transformers. I must say though, I'm not really good at tutorials of any kind but I hope this helps.
Chapters:
00:00 Intro 01:03 Cores 02:08 It's all about inductance 03:12 Measuring inductance at 10 turns 04:32 Overview of the circuit that will be used for testing 05:52 Testing each core as a transformer 10:52 How much inductance I would go with 10:58 Alternate ways to wind the core 12:17 A crazy (but working) way to wind 13:16 My gate drive transformer 14:55 With mosfets connected and how to stop ringing 17:50 My recommended way of connecting mosfets to transformer 19:42 Results
One thing I didnt mention in the "Results" chapter is that in a real application, I would have used beefier resistors and diodes, but this was just for demonstration purposes.
Well I hope this has cleared a lot of things up, I'm gonna go now, so untill next time, goodbye.How to test a secondary coils resonant frequency.CoolDudeClem2024-02-17 | I've gone back to being the old Cool Dude Clem that you all knew and loved. So I thought it was about time to get back to doing electronics and Tesla coil stuff. In this video I show a circuit to test the resonant frequency of a secondary coil, allthough this does require an oscilloscope and a frequency counter (or a scope with a built in frequency counter like I have).How to reset the Windows activation timer (on windows 7).CoolDudeClem2024-02-12 | A little trick I have known for a while. This is why I never have to activate my Windows 7 virtual machine.
This is all shown in real time with no editing.Out for a ride, and some floodingCoolDudeClem2024-02-12 | Yep, this is what a typical UK winter is like. Just giving more of my thoughts while out and about.
Edited in Adobe Premiere 6.5 on a Windows XP virtual machine. (so many people ask me what video editor I use, well now you know)Rant about Windows Activation and also a quick demo of free software that I use.CoolDudeClem2023-12-25 | I said it before and I'll say it again, relying on online servers and services in order to do anything is a really stupid idea.
Anyway, like I said in a caption in this video, here are some links on how to make an un-activated windows look "activated":
Winareo Tweaker: winaero.com/winaero-tweakerA computer noob tries to install an SSDCoolDudeClem2023-12-22 | I AM that noob. SO this is the trials and troubles I had installing my new SSD but eventually I did it, ready to have a new Windows installed onto it.Whats on my old hard drives?CoolDudeClem2023-12-22 | Having aquired a new hard drive dock (which can do a bunh of other things too) I can finally use IDE hard drives again. I have a few old IDE hard drives that have just been sitting around that I haven't been able to use for years and I've forgotten what's on them as I have'nt been able to use them as modern computer motherboards don't have IDE.
(that was a terrible description, but I'm sure you get the jest of it. I have'nt slept well in weeks and my brain doesn't work anymore, also Firefox has decided to not to underlne my dyslexic spelling mistakes anymore, so if there are a lot of spelling mistakes, now you know why)Fixing ground loops with transformers.CoolDudeClem2023-12-20 | While I have an adequate audio set up (well adequate for me), there are ground loops everywhere, picking up weird digital noise from the computer. Can I fix this with audio isoation transformers? We'll see.How to change your voice with software (and for free).CoolDudeClem2023-12-02 | Well I thought it was about time I uploaded this. So recently I discovered the RVC AI voice changer. It works quite well and I can now sound like a 12 year old Kid, AOSTH Tails, The Stanley Parrable Narrator, Lisa Simpson, Speakonia Adult Male 1, Microsoft Sam, Commodore 64 Sam, and many more.
Voice models I made (does NOT include my own voice): mediafire.com/file/3hvm0h41z1m5a22/my_voice_models.7z/fileBig Update, Starkidz Ep 8 progress and other things.CoolDudeClem2023-11-12 | Well I thought it was about time just to let you know that I'm not dead, just very VERY busy.The Technics RS-BX701 Cassette DeckCoolDudeClem2023-07-14 | Been a while since I've done one of theese. I found this in my "shed" and didn't even know that I had it. Just goes to show that sometimes you dont even know your own stuff! Of course I do show the insides and do a recording test.The only light in the world with a power supply made by Nintendo!CoolDudeClem2023-07-14 | Confused? Well, since the fluorescent light in my room has come to the end of it's life and I can't get a replacement because the laws on what kind of lights you can still buy is stupid. This is what I came up with. This used to b e the back-light I made for my old TV that I couldn't fix, so I just re-purposed it as the light for my room. To power it I decided to use my old Wii-U power supply since it can easily deliver the 3 amps the light require, only trouble is it's a 15 volt supply and not a 12 volt one. But me being me I found a simple solution to that.Failed attempt at repairing a powered speaker.CoolDudeClem2023-07-14 | I found this in the junk and I thought I'd try to see if I could make it work again. I know it's not worth repairing this, it was a piece of total shite anyway, but I just thought I'd do it just for the hell of it. Let's just say it stated out as junk, and ended up as junk. Either the amplifier does not work, or I just don't know how to get it out of standby.The Starkidz Ep 8 Preview - The first 12 and a half minutes!CoolDudeClem2023-06-02 | Well, just to show that this project isn't dead and I am working on it, here's the first 12 and a half minutes! Why 12 & 1/2? Well, that's what I've done so far. Some of the animation at this point is a little ropey but that will be fixed later on. There obviously WILL be MORE coming later when it's all done, but I wanted to show at least SOMETHING in the meantime. At the moment the transitional animations aren't done, and there is also no music or sound FX, like I said, that will all be done when this is finnished.A ride in the countryside (ft bonus WIP footage from the Starkidz ep 8)CoolDudeClem2023-05-07 | Don't worry, I'm not turning into a vlog channel, it's just that, well, as it's a nice day, I thought I'd go out into the country for a while. Just once again rambling on about my thoughts (this is when you can hear me over the wind). Also right at the end of the video, some footage from The Starkidz Episode 8 (yes I am animating that now).Updates about my neighbors, how it all started and how it is now.CoolDudeClem2023-04-22 | In classic CoolDudeClem walk 'n talk v-log style! With plenty of jump-cuts while I gather my thoughts and pause while random people randomly decide to randomly be randomly about at random.
I haven't done one of these in AGES so I thought I would.
MY NEIGHBOR IS A TOTAL TWAT. MY NEIGHBOR IS A SELFISH BASTARD. MY NEIGHBOR IS A WASTE OF SPACE. MY NEIGHBOR IS A TOSSER. MY NEIGHBOR IS USELESS. MY NEIGHBOR THINKS EVERY SUNNY DAY IS PARTY TIME. MY NEIGHBOR IS STUPID. MY NEIGHBOR ONLY CARES FOR HIMSELF. MY NEIGHBOR HAS ZERO TASTE IN MUSIC. MY NEIGHBOR MUST BE DEAF CONSIDERING HOW LOUD HE PLAYS IT (or at least he will be if he keeps that up). MY NEIGHBOR THINKS WE WANT TO HEAR HIS MUSIC. MY NEIGHBOR HARASSES THE OTHER TENANTS. MY NEIGHBOR LEAVES HIS JUNK IN OUR GARDEN. MY NEIGHBOR IS OF NO BENEFIT TO SOCIETY WHATSOEVER. MY NEIGHBOR SHOULD BE DRAGGED OUT ON TO THE STREET AND SHOT.
If someone killed him, it would not only make my life better, but other people's lives would also improove.How to make a crystal mic, and a good pre-amp for it.CoolDudeClem2023-04-10 | I'm not sure if I've allready done a video about this, but as I don't really have much to do right now and I'm kinda bored, I thought I'd do this.
Also there's a bit of a rant about inconsiderate noisy jerks near the end of the video.More computer woes: YouTube not loading.CoolDudeClem2023-03-08 | Those of you who read my latest post are aware that my YouTube ain't working properly, this is what it's actually doing. I've not idea what's going on. I think I must have inadvertentley changed a setting or something, looking it up on google is NO help as usual.Clem Rants - SunCoolDudeClem2023-02-21 | Just sharing my opinion on why I absolutely DESPISE sunny days.
I haven't always been like this, when I was little I preferred sunny days (maybe because there were so few back then). But now, as in introvert, and because it's rarely cloudy here anymore, when it's sunny I just can't stand it! I would much prefer gloomy grey stormy days. Grey dull days are great for being indoors working on projects and things. To set the record straight, I don't like sun, but I don't like winter either. I would love it if the weather was always overcast, rained more, but was comfortably warm all year round (not too cold, not too hot, just right) I would be happy.The record player experimentCoolDudeClem2023-02-07 | I don't know if YouTube will accept this video as it contains music from vinyl records. Anyway, recently I came across a circuit that lets me connect a ceramic cartridge up to a magnetic phono pre-amp. Also I build a tube circuit for connecting the same cartridge to a line level in just for the hell of it and that is what takes up most of the video.
00:00 Intro and a bit of a rant about my twat neighbor. 01:11 Video actually starts here. 01:32 Schematics. 02:28 How I adapt a tube for breadboard use. 03:14 Initial tube circuit for connecting the cartridge to line input . 04:31 Tube and passives on breadboard. 05:25 Making sure my high voltage supply still works. 06:50 Making sure the tube filament is still good. 07:48 Measuring cathode voltage. 09:15 First changes to the circuit. 09:43 Measuring the cathode voltage again. 10:29 The circuit fully built. 11:17 Making sure the op-amp is buffering the cathode voltage. 12:27 First test. 13:25 Direct hookup. 15:46 Final schematic of cartridge to line input circuit and power supply. 17:08 FINALLY, the "velocitizer" (or in other words, the circuit to connect a ceramic cartridge to a magnetic phono pre-amp). 19:22 Test of the "Velocitiser". 20:34 Direct hookup of "velocitizer". 22:04 Conclusion.Rewiring my audio pt 2 - Finnishing offCoolDudeClem2023-02-07 | I just cant think of a better title.
The only thing left to do was to wire in the tape deck and the Dynamic Noise Reduction circuit, so I thought I'd do that now, so that's what I do here.Rewiring my audio pt 1 - making an active speaker and other stuffCoolDudeClem2023-01-22 | I just cant think of a better title.
Well I thought it was about time I uploaded a video. I want to rewire how all my mostly used audio stuff (including the computer) is connected. Also due to how my speakers are placed I don't get a proper stereo sound, so I just decided to have a mono speaker at the computer, but leave everything else in stereo. Considering most of the stuff I do at the computer wouldn't really benefit from stereo anyway, I'm happy with that in mono. I don't know why this is so long winded.A frosty morning rideCoolDudeClem2022-12-08 | Well, while stuff is being done to the house and I don't want to be in there with all the noise, I thought I'd go out on my bike for a while and take you all along for the ride, most of the time without pedaling of course!
Just to make it clear this is not a range test, even though I went several miles (most of that without pedaling), the battery is still at full bars!
It's a bit hard to hear what I'm saying due to where I had the camera placed but you can hear most of it.
One day I might try it without the speed limiter on, but to be quite honest I think I allready go fast enough!
This video's over 15GB long! I need to check my encode settings.The e-bike saga part 2CoolDudeClem2022-12-03 | Part 1 was "4k video test"
Well, after what feels like an ETERNITY of waiting, I FINALLY have the new battery for my bike! 48 volts, 18 Ah, and bigger & better than that old blue 36 volt one I had. Now, how am I going to get this onto my bike? Well, I always come up with something.Experimenting with an experimental buck converterCoolDudeClem2022-11-28 | becuase I need a better power supply for the lights in my room. While a linear supply would be much easier to make, also so is a space heater! So it's time to go switch-mode.4K Video TestCoolDudeClem2022-11-06 | Since I accidentally recorded this footage in 4k, I decided I would see if I could edit it and upload it. Well, turns out that my computer can easily edit 4k videos, and Shotcut supports UHD. Let's see if I can upload it.
I guess you can think of this as a sneak peek into what is to come. The next video on this will be in normal HD though as theese 4k video files are huge.
Since I only have a 1080p monitor, some of you will be able to watch this in a quality that I never will!Camera Donation, and an out and about with Clem video.CoolDudeClem2022-10-28 | Big thanks goes out to 000biary000 (hope I got the name right). So I got 2 new cameras and try them out. If I sound weird in this video, I only had just got up at this point and I always sound bad at that time.Building a small amplifier part 2/2 - The AmplifierCoolDudeClem2022-10-16 | Well, here it is, here's the amplifier, it's simple but works well and sounds pretty good.
The final schematic is shown near the end of the video. Feel free to take a screenshot and copy it if you wish to.
Disclaimer: Please do NOT attempt to "plug in" a transformer to the mains the way I do. I fully understand the risks involved but I have done this so many times I can practically do it blindfolded, you might not be so lucky.Building a small amplifier part 1/2 - Power SupplyCoolDudeClem2022-10-16 | Well I thought it was time for another video. The Reel to Reel tape recorder that I use as the amplifier fro my computer audio is developing problems on one channel, so I thought I'd go and build a new amplifier from scratch.
In this video I show how and how not to make a split-rail power supply.
Disclaimer: Please do NOT attempt to "plug in" a transformer to the mains the way I do. I fully understand the risks involved but I have done this so many times I can practically do it blindfolded, you might not be so lucky.Building a battery charger part 2 - Trying the Volt & Current limit, and shutoff circuits.CoolDudeClem2022-09-19 | Well here's part 2. Part 3 will be done when I have the time. So in this video I test the voltage & current limit circuit, as well as the circuit that will disconnect the battery after being chardged.Building a battery charger part 1 - Ideas and power supplyCoolDudeClem2022-09-16 | Well, as most of you know, that piece of sh*t charger kinda died on me, so here in this video, I go over ideas for a much better charger with voltage limit, current limit and will shut off when charging is complete. I also start work on the power supply, because well let's face it, no electronics project can work without power!Is this a charger, or a joke? (and attempted repair)CoolDudeClem2022-09-04 | Well, I thought I'd take my dead bike charger to bits and see if I can fix it. It's items like this that give Chinese electronics a bad name. At least I still have a temporary solution that works, and soon I will be making a better charger.Making an audio mixer for my computer. Part 3 - The MixerCoolDudeClem2022-08-29 | Well, here it is, the final part where I make the audio mixer. This is so that instead of having to switch between the computers 2 line outputs (one of which goes through a valve/tube saturator) and the sound of my Sky Q box, I can just have it mixed, so no matter which source is playing audio, it will get to the amp and speakers.
I made this video about 2 weeks ago and then forgot to upload it, Doh!Out and about with Clem - Sucky Muggy Sunny Weather rantCoolDudeClem2022-08-23 | I may hate winter, but I hate this too. Here in the UK lately it's been nothing but sunny, dry and un-bearably hot for the past 3 months with no rain. I don't know what's happened to the weather, why it has decided to be unbearably hot for 3 months straight and no rain and I'm sick of it. Sun sun sun sun all the bloody time, I am soooooooooooooooo sick of it! Weather (if you can even call clear blue skies "weather") never used to be like this, I can remember the time when it was just constant drizzle all year round, but now this! OH sure there might be a few clouds in the sky now and then, but they never produce any rain!
This was filmed on my £50 camera because it's the only camera I have that still has a usable battery. Yes the mic on it sucks and the image stabilization is pretty much non-existent so I added a extra layer of stabilization in Shotcut and boosted the sound.Making an audio mixer for my computer. Part 2 - VU MeterCoolDudeClem2022-08-17 | In this part I make a VU meter that can take both the Left and Right audio channels and display them combined on a single meter. With all the sleep deprivation I've had recently due to the relentless heat I'm even worse at explaining things than I usually am.Making an audio mixer for my computer. Part 1 - 2073D as Headphone ampCoolDudeClem2022-08-12 | Time for a new audio project. After the failure that was my previous audio mixer for my computer's audio outputs (and other things). I thought I would try again. I will be doing 3 circuits. A Headphone amp, a VU meter circuit, and of course the mixer itself. In this video I tackle the headphone amp, using a 2073D chip I found in some junked electronics.Making a battery charge meter ... for my bike.CoolDudeClem2022-08-01 | As many of you know, I upgraded my bike to an e bike, but they gave me a different battery to what I ordered. So, until I can get the right battery, I decided to make a charge meter to tell me how much usable charge I have in that battery that I have.Upgrading my bike to an E-Bike!CoolDudeClem2022-07-13 | This is something I have wanted to do for years! Although things didn't go exactly as planned, and I've never done this before, I think it all turned out well enough in the end. Now I can feel like a little 6 year old again with his brand new ride-on toy, except of course, this will go a lot faster!Proparing for the HEATCoolDudeClem2022-07-08 | Well, the summer heat is about to hit, turning my room into an oven, so I need to do something about one of the major heat contributors inside my room that makes the temperatures in my room even more un-bearable.
Oh God I'm dreading the heat, it means I'll need my windows open for ventilation and let the cool air (if any) in. That also means I will have to put up will all the asshole hooligan neighbors noise too, who think it's time to be noisy, do relentless DIY all day and party all night. And of course, more nights of sweating and no sleep.
The downstairs allways stays nice and cool, but upstairs is like the freaking Sahara dessert, even the walls are'nt cold! Why does the upstairs have to heat up so dam much?New Tesla Coil Project Part 3 - Measuring secondary resonant frequency and primary inductance.CoolDudeClem2022-06-24 | And working out what the resonant capacitor should be.
I know it's been a while, but with other things going on in my life including serious anxiety issues I haven't had time to do videos. One day I'll finnish this project.
Anyway, so I thought it was about time to find out what value the resonant capacitor needs to be, this can be done by finding the primary's inductance and finding the secondary's resonant frequency, then plugging those numbers into an online calculator. Measuring the primary's inductance is simple enough, but for measuring the secondary's resonant frequency requires some simple electronics.
Link for the online calculator: omnicalculator.com/physics/resonant-frequency-lcFixing the light in my roomCoolDudeClem2022-06-24 | Well, everything suddenly went dark on evening and I thought it was a power outage, but then I realized it couldn't be that as everything else was still on, the light fixture had broken. SO in this video I fix it. This is NOT a how-to or tutorial video, it's just me, vlogging my repair.New Tesla Coil Project part 2 - Making the interrupter and gate driveCoolDudeClem2022-06-05 | Sorry it's such a short one today, but, well, here it is part 2. In this video I build the interrupter and the gate driver parts of the circuit. I would have done this sooner, but you know, busy life. Also I haven't been sleeping well due mainly to anxiety.Printer ProblemsCoolDudeClem2022-05-22 | Last video for today ... You would not BELIEVE the trouble I have had getting a paper jam out of my printer!Randomness (IDK if you watch or not)CoolDudeClem2022-05-22 | Just some random clips that didn't make it to YouTube (untill now)New Tesla Coil Project Part 1 - Power SupplyCoolDudeClem2022-05-22 | In this video, I work on the power supply, so, no sparks in this video. I started this back in June 2020, but never got any further than making the power supply as I didn't have the parts I needed, so this project has been on hold for almost 2 years! This video has been on my hard drive quite a while. Also, I rant about my (at the time) bad neighbours. After this video has been uploaded I will start working on the rest of the circuit.