JH-TechPart 5 of the disassembly of a 1987 YAMAHA FZ 750 engine with 80.000 km (50.000 miles). In this final part of the teardown I remove the valves from the head.
FZ 750 Engine disassembly, part 5, removing the valves.JH-Tech2022-02-02 | Part 5 of the disassembly of a 1987 YAMAHA FZ 750 engine with 80.000 km (50.000 miles). In this final part of the teardown I remove the valves from the head.Yamaha R1 - Finishing touchesJH-Tech2026-02-14 | I fix the last two issues with the R1. I replace the brake master cylinder because the non original one caused the brake lever to touch the fairing bracket when turning fully to the left. A second minor issue was that the hose for the airbox drain was wrongly connected to a pipe on the carburetors. Now the R1 is done. I hope to ride it once this summer when the roads are clean and share a video of it. Thanks for watching!Yamaha YZF 750 - Startup and carbs synchronizationJH-Tech2025-12-18 | After I assembled this YZF 750 a year ago I never got it started. So now I took the time to finish this project and get the bike started. It needs a crabs synchronization as well.Yamaha R1 - Fixed indicator lights back to original using 3D printed partJH-Tech2025-11-27 | The original front indicator lights on my Yamaha R1 had been replaced with aftermarket smaller models. The fairing had been cut away to install these. Since I wanted to mount the original style indicator lights I had to repair the fairing. For that I designed the missing part and had it 3D printed. After some trimming I fixed that to the fairing. I am happy with the result.
#yamahayzfr1 #asmrnotalkingYamaha R1 - Full Assembly Time LapseJH-Tech2025-11-20 | Complete assembly time lapse of a '01 Yamaha YZF 1000 R1
#yamahar1 #motorcyclebuild #yamahayzfr1 #asmr #timelapseYamaha R1 - Assembly final partJH-Tech2025-11-05 | Final part of the assembly series of a YAMAHA YZF R1 from 2001. In this part I adjust the Exup cables, get the engine started and adjust the carburetors synchronization. I install all the fairings and give them a polish.
I decided not to completely restore the fairings. They have some minor defects from usage. But still good. I am happy with the final result.
Feel free to like if you enjoyed the video.
#yamahar1 #motorcyclebuild #yamahayzfr1 #asmrYamaha R1 - Assembly part 5JH-Tech2025-10-16 | Fifth part of the assembly series of a YAMAHA YZF R1 from 2001. In this part I install the rear wheel, sprockets and chain, the air filter. I bleed the brakes, fill the engine oil and coolant and change the oil filter. Finally I install the rear indicator lights.
#yamahar1 #motorcyclebuild #yamahayzfr1 #asmrYamaha R1 - Assembly part 4JH-Tech2025-10-09 | Fourth part of the assembly series of a YAMAHA YZF R1 from 2001. In this part I install the forks, front wheel, front brakes, the exhaust and passenger footrests.
#yamahar1 #motorcyclebuild #yamahayzfr1 #asmrYamaha R1 - Assembly part 3JH-Tech2025-10-02 | Third part of the assembly series of a YAMAHA YZF R1 from 2001. In this part I install the carburetors, the ignition coils, the EXUP actuators and cables and the rear inner fender with electrical components. I also fix the wrongly routed wiring harness.
#yamahar1 #motorcyclebuild #yamahayzfr1 #asmrYamaha R1 - Assembly part 2JH-Tech2025-09-25 | Second part of the assembly series of a YAMAHA YZF R1 from 2001. In this part I install the exhaust manifold, the wiring harness and the radiator with hoses. I also install a rubber part on the swingarm I forgot to install in part one.
#yamahar1 #motorcyclebuild #yamahayzfr1 #asmrYamaha R1 - Assembly part 1JH-Tech2025-09-18 | First part of the assembly series of a YAMAHA YZF R1 from 2001. I stripped the bike as you can see in previous videos. After cleaning and restoration of some parts I could start the assembly process.
#yamahar1 #motorcyclebuild #yamahayzfr1 #asmrBig in Japan expo impressionsJH-Tech2025-09-11 | Some impressions of the motorcycles displayed at the temporary exposition "Big in Japan" held in the summer of 2025 at the Autoworld museum in Brussels. At the end some cars too. I hope you enjoy. Let me know your favorite in the comments.
Timecodes
0:00 Honda VFR750R RC30 (1988) 0:53 Yamaha FZR750R OW01 (1989) 2:02 Suzuki GSX-R750 (1985) 2:34 Honda VF1000R (1984) 2:54 Honda NR750 (1992) 3:55 Honda CBR900R Fireblade (1992) 4:55 Yamaha YZF-R1 (1998) 6:00 Honda VTR1000 SP1 RC51 (2000) 6:51 Suzuki GSX1300R Hayabusa (1999) 7:31 Kawasaki ZXR750RR (1991) 8:37 Yamaha YZF-R1 (2025) 8:54 Honda CB750 9:03 Kawasaki Z900 9:14 Suzuki GS750 9:20 Kawasaki GPZ (Topgun replica) 9:29 Kawasaki H2R 9:36 CarsYamaha FZ1S - Valve clearance adjustment, part 2JH-Tech2025-09-09 | Adjusting the valve clearances on a YAMAHA FZ1S (Fazer 1000) from 2006. Detailed video, part 2. The engine was making a ticking noise so I decided to do the valve clearance adjustment.
This is a long detailed series of the process. A time-lapse version is available here: youtu.be/v4fKGfYVsUQYamaha FZ1S - Valve clearance adjustment, part 1JH-Tech2025-09-09 | Adjusting the valve clearances on a YAMAHA FZ1S (Fazer 1000) from 2006. Detailed video, part 1. The engine was making a ticking noise so I decided to do the valve clearance adjustment.
This is a long detailed series of the process. A time-lapse version is available here: youtu.be/v4fKGfYVsUQYamaha FZ1S - Valve clearance adjustment, TIME LAPSEJH-Tech2025-08-12 | Adjusting the valve clearances on a YAMAHA FZ1S (Fazer 1000) from 2006. Time lapse with music. A two part video series of this video at normal speed, with some more details and without music is available on the channel.Yamaha R1 - Carbs cleaningJH-Tech2025-01-09 | Cleaning the carburetors of the YAMAHA 2001 R1. Replacing the Dynojet kit by the OEM parts (main jet, needles and slide springs).
Music from #Uppbeat uppbeat.io/t/matrika/funky-stack License code: YQZSTH5DMGVOC2GKYamaha R1 - Valve adjustmentsJH-Tech2024-12-28 | Valve clearance check and adjust on YAMAHA R1 2001. This is not a tutorial on how to adjust the valves. I made some mistakes and have no footage of the camshaft installation. I hope it can just give an idea.
Music from #Uppbeat uppbeat.io/t/abbynoise/shine License code: K7CTWBTXSLIKHONJYamaha R1 - Exup valve thread repairJH-Tech2024-12-27 | Drilling out and repairing a broken bolt on the Yamaha R1 exhaust. The bolt broke when removing the Exup valve cover. I managed to remove without damage on the thread. Drilling in the center is crucial.
uppbeat.io/t/zimpzon/out-there License code: IG9HMXWG14BCEOWEYamaha R1 - Disassembly Part 4JH-Tech2024-12-07 | Detailed disassembly video series of a YAMAHA R1 from 2001.
In part 4 the engine is removed and the frame disassembled.
Full disassembly timelapse: youtu.be/RjLPq82Chk0Yamaha R1 - Disassembly Part 3JH-Tech2024-12-07 | Detailed disassembly video series of a YAMAHA R1 from 2001.
In part 3 the brakes, chain and footrests are removed.
Full disassembly timelapse: youtu.be/RjLPq82Chk0Yamaha R1 - Disassembly Part 2JH-Tech2024-12-07 | Detailed disassembly video series of a YAMAHA R1 from 2001.
In part 2 I remove the air box, carburetors, coolant, radiator and exhaust.
Full disassembly timelapse: youtu.be/RjLPq82Chk0Yamaha R1 - Disassembly Part 1JH-Tech2024-12-05 | Detailed disassembly video series of a YAMAHA R1 from 2001.
In part 1 all the fairings and the fuel tank are removed.
Full disassembly timelapse: youtu.be/RjLPq82Chk0Yamaha R1 - Full Disassembly Time LapseJH-Tech2024-11-21 | Complete disassembly of a 2001 YAMAHA R1. In order to properly clean and restore to original condition I decided to completely disassemble the motorcycle.
Music from #Uppbeat uppbeat.io/t/soundroll/top-rated License code: 1MYA4EEEDFGOKIRDYZF 750 R Full AssemblyJH-Tech2024-10-27 | Complete assembly time lapse of a '93 Yamaha YZF 750 R
Music from #Uppbeat uppbeat.io/t/vens-adams/late-night-drive License code: OEAVGJPZILRWJHUDRD 250 LC Crankcase repairJH-Tech2024-06-08 | Repairing a broken crankcase of a YAMAHA RD 250 LC.YZF 750 Assembly pt 7JH-Tech2024-05-13 | Final part of the assembly of the YAMAHA YZF 750. Mounting the fairings. Still to do are the oil and coolant levels, exup valve adjustment and finally the startup and carbs synchronization.YZF 750 Assembly pt 6JH-Tech2024-05-05 | Part 6 of the assembly of a YAMAHA YZF 750 motorcycle. Bleeding the brakes, installing the muffler, fixing a connector and placing some bodywork.YZF 750 Assembly pt 5JH-Tech2024-04-27 | Installing the brake hoses and clutch hose. Routing some electrical wires on the Yamaha YZF 750.YZF 750 Assembly pt 4JH-Tech2024-04-22 | Installing the wheels, brakes and handlebar controls on the YAMAHA YZF 750.YZF 750 Assembly pt3JH-Tech2024-04-09 | Part 3 of the assembly of the YAMAHA YZF 750. Installing the ignition coils, side stand, exup motor and cables, rear subframe, fender and forks.YZF 750 Carbs refreshJH-Tech2024-04-02 | Refreshing the carburetors of a YAMAHA '93 YZF 750.YZF 750 Assembly pt2JH-Tech2024-03-19 | Installing the engine in the YAMAHA YZF 750.YZF 750 Assembly pt1JH-Tech2024-03-10 | Part one of the assembly of a YAMAHA YZF 750 motorcycle. Assembling the swingarm and chassis.YZF 750 Assembly startedJH-Tech2024-03-03 | Started the assembly of the YZF 750 #shorts #yamaha #yzf750YZF 750 Squeaky EXUPJH-Tech2024-02-25 | YZF 750 Squeaky EXUP valve. Removed the valve and applied some high temp ceramic grease.RD 350 LC central stand templatesJH-Tech2024-02-19 | Templates I used for locating the central stand brackets. #shortsFZ 750 Front brake master pistonJH-Tech2024-02-19 | #shorts FZ 750 Front master cylinder piston and seal assembly orientation.FZ 750 Clutch master pistonJH-Tech2024-02-19 | #shorts FZ 750 Clutch master cylinder piston and seal assembly orientation.FZ 750 Rear brake master pistonJH-Tech2024-02-19 | #shorts FZ 750 Rear master cylinder piston and seal assembly orientation.YZF 750 valve clearance checkJH-Tech2024-02-18 | Getting the engine ready to install in the frame. No rebuild, only checking the valve clearances and fixing the intake manifolds gaskets.Yamaha YZF750 - Footrests restorationJH-Tech2024-02-02 | Restoring or reconditioning the footrests of my Yamaha YZF 750 R from 1993. I try to get them back is clean as possible in the original condition. The support got a new zinc plating and the aluminum rests where vapor blasted.Yamaha YZF750 - Brake calipers cleanupJH-Tech2024-01-26 | Refurbishing the Yamaha YZF 750 brake calipers.YZF 750 Shock reconditioningJH-Tech2024-01-18 | The shock absorber of the YAMAHA YZF 750 was looking bad but it was still working and the budget is tight so I did not restore the internals. Only a cosmetic cleanup.YZF 750 Full disassembly timelapseJH-Tech2024-01-02 | Time lapse video of the disassembly of a YAMAHA YZF 750 '93 motorcycle.YZF 750 Cleaning partsJH-Tech2023-12-23 | Cleaning the parts of Yamaha YZF 750.YZF 750 disassembly pt3JH-Tech2023-12-04 | YAMAHA YZF 750 R disassembly part 3.YZF 750 disassembly pt2JH-Tech2023-11-26 | YAMAHA YZF 750 R disassembly part 2.YZF 750 disassembly pt1JH-Tech2023-11-21 | YAMAHA YZF 750 R disassembly part 1. The plan was to give this YZF a thorough clean, but it ended in a complete disassembly.BF20L assembly time lapseJH-Tech2023-11-05 | Optimum BF20L milling machine full assembly.BF20L assembly pt1JH-Tech2023-11-02 | Optimum BF20L milling machine assembly part 1.BF20L assembly pt3JH-Tech2023-11-02 | Optimum BF20L milling machine assembly part 3.