STL281: The facebook bark police FineWoodworking 2022-12-16 | Larissa Huff joins Vic and Ben to discuss disk sanders, shop carts, live-edge tables, and milling.0:00 - Intro1:37 - Larissa's new shop8:04 - Larissa's fellowship at CFC16:44 - Tablesaw sanding disc 29:48 - The ideal shop cart41:10 - Does live edge need to have bark?46:42 - Do you need to flip a board while planing?54:36 - Vic's pull-style hand planeLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL280: Bench top jointers and ditching the table saw FineWoodworking 2022-12-02 | Vic and Ben discuss life without a table saw, how much room a bandsaw takes up, bench top jointers, and how to be a good Instagram community member.Check out Michael Cullen's new video workshop here: finewoodworking.com/videoworkshop/2022/11/make-a-faceted-octagon-with-hand-tools0:00 - Intro2:04 - Instragm Trolls21:15 - Life without a table saw and where to put a bandsaw55:58 - Small jointer/planer combos and benchtop jointersLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL279: Dont forget about Fun Woodworking FineWoodworking 2022-11-18 | Asa Christiana joins Mike and Ben to discuss tool libraries, the best way of fairing curves, and what one listener might be doing wrong with their hand plane.This episode is sponsored by Woodcraft.0:00 - Intro1:17 - Asa's new book15:18 - Are tool libraries useful for new woodworkers?23:03 - Skipping plane problems30:35 - Segments42:31 - Fairing a curved surfaceLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
So many clamps FineWoodworking 2022-11-16 | Prone to leaving your tools scattered around the shop? This video is for you.Hand-Screw How-To:finewoodworking.com/2017/03/29/hand-screw-bob-van-dykeHow to Use the L-Fence:finewoodworking.com/project-guides/shop-machines/versatile-tablesaw-l-fenceSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL278: Fine Plywood FineWoodworking 2022-11-04 | Mike, Anissa, and Ben discuss their favorite plywoods, how flat an assembly table needs to be, Mike's tormek, and corner desks.0:00 - Intro4:58 - Flatness of assembly tables14:42 - Best plywood for fine woodworking30:14 - What dead woodworker would you want to hang out with?47:18 - L Shaped Desks57:58 - How does Mike use his Tormek?Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
Perfect Panel Glue Ups with Mike Pekovich FineWoodworking 2022-11-02 | Jointing with glue-ups in mind is a precise business. Watch how Mike Pekovich breaks it down into simpler steps.For more information: finewoodworking.com/2022/08/10/perfect-panel-glue-upsThis video was sponsored by Grizzly Industrial
A round ruler? — The Mirock Wheel Ruler FineWoodworking 2022-10-24 | This measuring tool has it all: It's nifty, it fills a need, and the maker is amazing.Mirock's Etsy Page - etsy.com/shop/MirockToolworksMirock's YouTube Page - youtube.com/c/mirockswoodshop
STL277: When good enough is good enough FineWoodworking 2022-10-21 | Amanda Russell (aka @sawdustwoman5788 ) joins Barry and Ben to discuss what it's like to apprentice for one of the greats, when to turn off the need for perfection, and what the future holds. This episode is sponsored by Titebond.Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
What the heck is a climb cut? FineWoodworking 2022-10-07 | Climb cutting when routing can be confusing. In this video we try to clear up the confusion and show some tips for identifying a climb cut and avoiding it.Climb-cutting: Don’t believe the naysayers - Learn how to safely and effectively climb-cut with a handheld routerfinewoodworking.com/2011/07/15/climb-cutting-dont-believe-the-naysayersCheck out Bob Van Dyke's article on proper routing technique in issue 299 of Fine Woodworkingfinewoodworking.com/issue/2022/09/299-nov-dec-2022
STL276: Too flawless to cut FineWoodworking 2022-10-07 | Gary Rogowski joins Vic and Ben to discuss the important parts of a mortise and tenon joint, using rope in place of clamps, and that board you wind up carrying around for the rest of your life instead of using it.This episode is sponsored by Titebond and ShaperSign up for PantoRouter's webinar on October 20th: www.finewoodworking.com/webinars0:00 - Intro1:39 - Teaching online13:40 - The important parts of a mortise31:10 - Using string as a clamp47:19 - All-time favorite tools1:03:35 - The piece of wood you don't want to cutLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL275: Tighten those router bits! FineWoodworking 2022-09-23 | Bob Van Dyke joins Mike and Ben to discuss table saw blade sharpening, drill press height, scary router bits coming loose, and his upcoming dovetail bootcamp.Larissa Huff's Hand-routed Lettering video: finewoodworking.com/2022/09/16/hand-routed-letteringFull-length Sam Maloof documentary: finewoodworking.com/2022/09/21/sam-maloof-woodworking-profile0:00 - Intro2:47 - Dovetail bootcamp - finewoodworking.com/elearning20:34 - Table saw blade sharpening32:49 - Drill press table height43:34 - Segments1:02:04 - Router bit on the move!Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL274: Inside Highland Woodworking FineWoodworking 2022-09-09 | Mike and Ben visit with Chris and Molly of Highland Woodworking to learn about their history, how the store operates, and of course, their Woodslicer blades. Then we catch up with Vic to get the inside scoop on his move.Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL273: Shaper Origin—Then and Now FineWoodworking 2022-08-26 | Mike and Ben interview Joe Hebenstreit and Adi Rao about their work with Shaper—from the early prototypes to their newest offerings, Shaper Studio and Plate.This episode is sponsored by Shaper.For more information head on over to shapertools.comEvery two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.
Building our new tool wall FineWoodworking 2022-08-25 | The Fine Woodworking shop is getting a new tool wall and we're taking you along for the ride.Check out the plans for Mike Pekovich's tool holders here: finewoodworking.com/project-guides/shop-projects/a-cabinet-for-hand-toolsSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL272:The end of the end-grain cutting board? FineWoodworking 2022-08-12 | Mike, Anissa, and Ben debate cutting boards and talk about taking box-making skills to the next level, fixing shellac mistakes, and solid-wood door movement.0:00 - Intro1:20 - Cutting boards24:58 - Solid-wood door with kumiko30:40 - Segments48:19 - Fixing shellac mistakes52:24 - Next level boxingLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
Replay: Router Livestream with fixed audio FineWoodworking 2022-08-04 | YouTube wasn't getting the right audio from our feed, and for some reason, as far as we can tell, they made it so you can't change the setting after the feed started. Thankfully we recorded it locally. If you struggled with the audio on the live version, this should be a LOT better. We'll make sure we double check that setting for next time!
STL271: Making dull is more fun than getting sharp FineWoodworking 2022-07-29 | Megan Fitzpatrick joins Vic and Ben to discuss replacement plane blades, grinding angles, rabbeting dovetails and our first ever (we think) live call in!0:00 - Intro1:47 - Replacement plane blades9:07 - Grinding primary bevels20:48 - All time favorite tools33:36 - Adding a rabbet to aid in dovetailing42:19 - Call in: Antonio asks where he should put his shopLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL270: Should I get a shaper? Oh.. FineWoodworking 2022-07-15 | Steve Latta and Bob Van Dyke join Ben to talk about marquetry, crossgrain banding, and workshop injuries.This episode is sponsored by the Society of American Period Furniture Makers - http://www.sapfm.org0:00 - Intro1:46 - Marquetry24:49 - Crossgrain banding34:26 - Shaper vs. router table48:41 - **graphic injury discussion**57:50 - Dropping wood on the floor on purposeLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL269: How we absorb woodworking information FineWoodworking 2022-07-01 | Mike, Vic, and Ben discuss how they find information they need to learn a new technique and the impulse buys that they just can't walk away from.This episode is sponsored by the Society of American Period Furniture Makers and The Northwest Woodworking Studio0:00 - Intro2:19 - How do you find woodworking information41:08 - Segment Potpurri55:00 - Woodworking impulse buysLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
A template that is the opposite of what you have. Magic! FineWoodworking 2022-06-27 | Find out more about the technique here: finewoodworking.com/2022/06/24/making-a-complementary-routing-template
STL268: What flavor are your chisels? FineWoodworking 2022-06-17 | Mike, Barry, and Ben discuss working with thin stock, combination milling machines, chisel handles, and Barry and Ben get a little too close to being fired on air.This episode is sponsored by Woodcraft and Pony/JorgensenMike Mascelli's video workshop can be found here: finewoodworking.com/videoworkshop/2022/05/staining-and-dying-wood-with-mike-mascelli0:00 - Intro2:00 - Ben's new tablesaw16:14 - Milling thin stock25:39 - Tiny pieces of ebony33:43 - Segments57:52 - Why don't you like combo machines?Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL267: The router queen FineWoodworking 2022-06-03 | Larissa Huff wows Vic and Ben with her harrowing tales of freehand letter routing and many other woodworking feats. This episode is sponsored by Shaper and Pony/Jorgensen0:00 - Intro 15:23 - Different edge treatments26:07 - Leveling an outfeed table40:26 - All time favorite tools51:42 - Larissa loves routers!1:04:49 - Shaping an anticlastic curveLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL266: Pro day with Hiller and Farrington! FineWoodworking 2022-05-20 | Nancy Hiller and Mike Farrington talk candidly about the realities of being professional woodworkers.This episode is sponsored by Mortise and Tenon Magazine and Triton ToolsIf you're interested in the job posting: taunton.com/careersLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimitedEvery two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.
Setting up our 14-in. bandsaw FineWoodworking 2022-05-12 | We're doin' it live! Time to get an old favorite—our 14-in. Delta bandsaw—running again.
STL265: CA glue is the new hide glue FineWoodworking 2022-05-06 | Mike, Anissa, and Ben discuss workbench height, how long in advance you can mill lumber, shop flooring, and using epoxy.This episode is sponsored by Triton Tools0:00 - Intro7:25 - Segment potpurri12:40 - Shop flooring20:17 - The carriage maker's plane22:41 - Workbench height34:08 - Milling lumber in advance48:23 - Using epoxyLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimitedEvery two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.
The jointer and planer are a team FineWoodworking 2022-04-22 | Flat and square stock starts at the jointer to get one face flat then to the planer to get the opposite face parallel to it.Sponsored by @grizzlymachines For more information on Mike's techniques on milling:finewoodworking.com/2022/04/18/the-jointer-and-planer-are-a-team-2
STL264: This doctor prescribes Japanese tools FineWoodworking 2022-04-22 | Wilbur Pan joins Barry and Ben on the podcast and blows their minds.This episode is sponsored by Pony/Jorgensen.Come to our livestream next week! youtu.be/qMrSm79n0O0Links from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
Template sanding on a disc sander FineWoodworking 2022-04-15 | We’ll show you how to use a disc sander to trim the smallest parts flush to a template.For more information on Ben's jigs: finewoodworking.com/2022/04/11/flush-trimming-on-a-disc-sanderCheck out Jeff Miller's article on the versatility of the disc sander in the new issue of Fine Woodworking Magazine: finewoodworking.com/2022/04/14/the-versatile-disc-sanderSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL263: Our new shop!! FineWoodworking 2022-04-08 | Thanks to our shop launch partner @grizzlymachines for sponsoring this episode.This episode was also sponsored by Pony/JorgensenFor more information on our newest online course: finewoodworking.mykajabi.comLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL262: The old tool trinity FineWoodworking 2022-03-25 | Sponsored by the Northwest Woodworking Studio's Online Mastery Program: http://www.Northwestwoodworking.com.Bill Pavlak's blog: finewoodworking.com/2022/03/22/new-shops-and-old-movies0:00 - Intro1:18 - Random talking and old tools11:07 - Professional woodworking?20:46 - How flat is flat enough before planing?33:58 - Dovetails in thin stock45:07 - Smooth moves1:03:48 - How accurate is acceptable?Links from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL261: Russ Filbeck gives back through woodworking FineWoodworking 2022-03-11 | We chat with chair maker, woodworking teacher, philanthropist, and all around force of positivity, Russ FilbeckThis interview was done in 2019, and originally posted to FineWoodworking.com in 2020. It's new to the podcast audience, and we thought the world could use a dose of Russ Filbeck right now.For more information on Russ and to get a copy of his incredible book on ladder back chair making - russfilbeck.comLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL260: LVL Workbench IRL FineWoodworking 2022-02-25 | Megan Fitzpatrick joins Barry and Ben to discuss rabbet block planes, bench dogs, handsaw techniques, and of course, her new (and old) workbench.Sign up here to be notified when registraion opens for our newest online Foundations course, SketchUp Fundamentals for Furniture DesignWith Dave Richards - foundationsofwoodworking.com/sketchupLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL259: Do homemade bandsaws make financial sense? (no) FineWoodworking 2022-02-11 | Rollie Johnson answers a batch of listener questions about dust collectors, homemade bandsaws, tool steel, cutter speed, power feeders, classic furniture drawings, machine restoration, and drying lumber.This episode is sponsored by Mortise and Tenon Magazine - mortiseandtenonmag.comSign up here to get more information on Fine Woodworking's upcoming online course, SketchUp Fundamentals for Furniture Design - foundations-of-woodworking.mykajabi.com/sketchup?preview_theme_id=21498319340:00 - Intro3:17 - One stage vs. two stage dust collectors11:59 - Should I make a bandsaw or buy one?18:55 - Why aren't chisels and planes made of high-speed steel?22:37 - How does speed affect cut quality?29:32 - Uses for a power feeder37:20 - What to do with all these machines?45:16 - Furniture drawings 50:33 - Using a greenhouse as a lumber kilnLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL258: Making pretty things and blowing up their spots FineWoodworking 2022-01-28 | Woodworker, artist, and author, Danielle Rose Byrd joins Barry and Ben to discuss greenwoodworking techniques and culture, taking care of your body, wood allergies, sharpening, and how to find your own style.This episode is sponsored by Peters Valley - http://petersvalley.orgDenatured alcohol is getting harder to find these days. Help us, help other woodworkers find this workshop staple. finewoodworking.com/2022/01/28/survey-the-hunt-for-denatured-alcohol0:00 - Intro2:09 - Power tools in greenwoodworking5:42 - Self care and blowing up spots26:49 - Wood and nut allergies38:44 - Coming up with a style56:11 - Sharpening a tertiary bevel?Links from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
A first look at our new shop FineWoodworking 2022-01-22 | Come along for the first look at our new shop space with Mike Pekovich.Special thanks to our launch partner Grizzly Industrial and to Oneida Air Systems, SawStop, Rikon, and Bessey for helping us assemble this incredible space!For more info: finewoodworking.com/2022/01/12/a-first-look-at-our-new-shop
STL257: Barry gets a tablesaw FineWoodworking 2022-01-14 | Anissa, Barry, and Ben discuss budget tablesaws, milling a bench top by hand, mobile bases, and finer furniture padsThis episode is sponsored by Peters Valley - http://petersvalley.org0:00 - Intro1:26 - Shop resolutions9:41 - Budget tablesaw woes22:05 - Building a base for a bandsaw?35:21 - Segments47:55 - Finer furniture pads56:28 - Milling lumber for a workbench by handLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL256: Justa planin and a scrapin FineWoodworking 2021-12-17 | Mike and Ben finish out the year answering a batch of questions about flattening plane irons, micro bevels, hot card scrapers, and touching up a glue line.For more information on Mike's online course -foundationsofwoodworking.com0:00 - Intro1:29 - Jig talk11:05 - Touching up an exposed glue line19:14 - Tool hacks27:41 - Micro bevels on small chisels28:38 - Talking about Mike's course48:51 - Flattening high-end plane irons56:17 - Dealing with hot card scrapersLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL255: Vics plywood workbench FineWoodworking 2021-12-03 | Vic Tesolin joins Anissa and Ben to discuss economy shop life, his new workbench, making handplanes, and sharpening toothed planes.This episode is sponsored by Garrett Wade0:00 - Intro2:36 - Economy shop help20:38 - Vic's Baltic birch workbench37:01 - Sharpening a toothed blade47:18 - Segements43:38 - Segments1:05:09 - Wooden handplane pinsLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL254: Iron and oak (and maple?) FineWoodworking 2021-11-19 | Cozied up in the new shop, Mike, Barry, and Ben discuss the progress setting up the shop, techniques for ebonizing, painting panels, and primo box hinges.This episode is sponsored by Titebond, Pony/Jorgensen, and Garrett Wade0:00 - Intro2:33 - Shop Talk14:23 - Ben's router lift score18:45 - Fancy box hinges32:06 - Ebonizing techniques43:38 - Segments1:02:56 - Painting a panel in a doorLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
The Innovators: Grizzly Industrial FineWoodworking 2021-11-12 | Mike Pekovich and Rollie Johnson chat with Grizzly’s own Jameson Hawn to get a behind-the-scenes look at the company.Grizzly's YouTube channel: youtube.com/c/GrizzlyIndustrialIncJameson's YouTube channel: youtube.com/user/TheArcherymadmanCheck out this video for more information on the history of Grizzly Industrial: grizzly.com/inside-grizzly
STL253: Woodworking is just tricks and fixing mistakes FineWoodworking 2021-11-05 | Furniture maker and machinery guru Ellen Kaspern joins Anissa and Ben to answer listener questions about jointers and walnut slabs, and to proclaim her never-ending love of the Delta Unisaw.This episode is sponsored by Titebond, The Northwest Woodworking Studio, and Pony/Jorgensen0:00 - Introduction and catching up with Ellen11:05 - Putting a shop into extended storage24:30 - How long should a jointer bed be?38:12 - All time favorites51:23 - A good wood to pair with a walnut slabLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL252: The pull of Japanese handplanes FineWoodworking 2021-10-22 | Andrew Hunter takes over the show to answer listener questions about Japanese handplanes and how he uses them in his work.This episode is sponsored by Shaper Origin.Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL251: Assume the glue is going to fail FineWoodworking 2021-10-08 | Mike, Anissa, and Ben discuss Patrick Sullivan's end-grain glue myths video, how a listener can hide a joint on an 18-ft. run of molding, and the pros and cons of floating tenon joinery.This episode is sponsored by Festool0:00 - Intro1:52 - End grain glue myths!21:34 - Joints in long runs of crown molding32:43 - Segments45:22 - Floating tenon joinery optionsWe're hiring an assistant digital editor! Are you tech and web savvy? Are you passionate about woodworking? You might be the right person to bring a new voice to FineWoodworking.com.Head on over to www.taunton.com/careers for more info.Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
stl250: Catching up with Ed Pirnik FineWoodworking 2021-09-24 | Ed Pirnik joins Ben to discuss the early days of Shop Talk Live and what he's been up to the past six years.Visit https://www.FoundationsOfWoodworking.com for more information on Mike's online course, The Foundations of Woodworking.Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimitedEvery two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.
STL249: MDF on a jointer? FineWoodworking 2021-09-10 | Bob Van Dyke joins Mike and Ben to discuss story sticks, cooling glue to get more open time, spring joints and admits to milling MDF on his machines!Sponsored by Grizzly Industrial0:00 - Intro1:30 - Are woodworking classes tiring?10:59 - When do you make a story stick?19:36 - Can you get more open time by cooling your glue?31:33 - Segments46:06 - 5 spring joints at once?58:26 - How deep of a cut do you take on a jointer?1:04:47 - Bob mills MDF on his machines!!!!!!!Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL248: Best of Shop Talk Live #1 FineWoodworking 2021-08-20 | Sponsored by Pony/JorgensenLinks from this episode can be found here - http://www.shoptalklive.comSign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletterSign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimitedSegments from:STL179finewoodworking.com/2018/12/21/stl179-barrys-insane-scrub-planeSTL185finewoodworking.com/2019/03/15/stl185-reading-bob-van-dykes-mindSTL214finewoodworking.com/2020/05/01/stl214-5-the-one-with-no-questionsSTL223finewoodworking.com/2020/08/28/stl223-mike-mascelli-knows-more-about-finishing-than-you-doSTL176finewoodworking.com/2018/11/09/stl-176-dont-like-resawing-tablesawSTL213finewoodworking.com/2020/04/10/stl213-making-wooden-handplanes
STL Profiles: Erika Torres FineWoodworking 2021-08-20 | Erika Torres tells us about her woodworking journey—from high school shop class to studying with Gary Rogowski–and why she's committed to woodworking for the long haul.Erika Torres is a woodworker in Oregon who has been building in some form or fashion since 2002.After completing Gary Rogowski’s mastery program at the Northwest School of Woodworking, she has begun her woodworking career with a bang, recently completing a set of tables commissioned by SawStop for their trade show booths.Erika’s inspiring Instagram feed can be found here. Give her a follow! instagram.com/madera.by.erikaLinks from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL247: Drop the baseline FineWoodworking 2021-08-13 | Mike and Ben discuss getting rid of marking gauge lines on dovetails, how long their blades last, more apron and pencil preferences, and why Mike has a day job. This episode is sponsored by Pony/Jorgensen0:00 - Intro1:37 - Why isn't Mike a full-time woodworker?19:16 - What did Mike wind up doing with his apron and pencil sharpener?33:16 - How long do your blades last?42:17 - Smooth move/Favorite technique52:56 - How do you get rid of the marking gauge line on joinery?Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL246: The mighty biscuit joiner vs. the domino FineWoodworking 2021-07-30 | @MikeFarrington joins Ben to discuss sliding tablesaws, keeping track of large projects, slow-setting glue, and whether the domino can actually keep up with the mighty biscuit joiner!0:00 - Intro6:33 - How do you keep track of huge projects?17:17 - Should a semi-pro get a slider?34:20 - Biscuit joiner vs. domino47:23 - Dealing with big glue ups?Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
STL245: Hope chest or nope chest? FineWoodworking 2021-07-16 | The whole crew gets together to discuss oil stones, how they work through projects, breadboard ends, and whether it's better to build or to sometimes buy.This episode is sponsored by Maverick Abrasives - maverickabrasives.com0:00 - Intro8:14 - How do you approach a new project?22:51 - Breadboard end pinned on a glue joint29:11 - Smooth moves44:00 - Oil stones for final polishing?56:49 - To build or buy a toy/hope chest?Links from this episode can be found here - http://www.shoptalklive.com Sign up for the Fine Woodworking weekly eLetter - finewoodworking.com/newsletter Sign up for a Fine Woodworking Unlimited membership - finewoodworking.com/unlimited
