Weathering Metal Tracks & More Mud Effects on Tiger I - 506 sPzAbt 1944 Panzermeister36 2020-05-15 | Today we will finish off the Tiger I. Hmm, I wonder what the next project will be :)Uncle Night Shift's Video: youtube.com/watch?v=dqhLJZqWdIg-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by: Sam Kuzel: www.soundcloud.com/samkuzel"William Alone [Extended]"DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Panzer IV by Rye Field Model Post Build Review (RFM 5053) Panzermeister36 2022-12-10 | This video will be a general review of the Rye Field Model Pz IV kits. I used a Pz IV Ausf.G kit, but actually built it as an early Ausf.H. These changes are easy to make since most of the required parts are included in the kit as unused spares. Rye Field Model makes the Ausf.H and Ausf.J models using many of the same sprues. Thanks to my friend Bruce (BruceTheModelNoob on YouTube) for helping me with these changes. He knows the Pz IV very well-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
JP IV Buddy Build Jagdpanzer IV L/48 July 1944 with Zimmerit Post-build Review (Dragon 6369) Panzermeister36 2022-09-17 | Hamilkar Barkas' Video on the L/48 version: youtube.com/watch?v=3Oe-kPbcWY0This video is a post-build review of Dragon 6369. We will explore the instruction errors, fit issues, and accuracy corrections I discovered while building the kit. The modifications I made to this kit to model the L/70 variant will also be covered.This is also my first video in my Buddy Build with Hamilkar Barkas where we will both build this kit and an sdkfz 250 in some dioramas. Summary:I finished this kit in about 5 days. Very nice build with no major fit issues, apart from the L/48 gun. Only a few minor instruction errors which I cover in the video. I solved the issue with the L/48 gun by simply using extra parts in the kit to make an L/70 variant. For a guide on fixing the L/48, check out Hamilkar Barkas' video on the same kit. I used a few parts from an Aber PE set to add some extra detail to the fender supports, tool clamps, and front mudguards. This PE is not required. I also used an Aber metal barrel, but there is a plastic L/70 in the kit so it's also not required.DS rubber tracks were replaced with aftermarket ones from Heavy Hobby. I don't like DS and they can degrade over time after exposure to enamel thinner during weathering.-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Ultimate 1945 Sturmgeschutz Kit Post-build Review: StuG III Ausf.G Late Production (RFM 5086) Panzermeister36 2022-09-03 | Today we will look in-depth at the brand-new Rye Field Model StuG III Ausf.G Late Production kit 5086. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
How to Paint HO Scale Full Panel Graffiti Panzermeister36 2022-08-27 | A quick video this week, just looking at how I applied some full-panel graffiti to an HO scale covered hopper based off of a reference photo. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Kit Preview: Brand New StuG III G Late Production RFM 5086 1/35 Panzermeister36 2022-08-11 | This kit has been out for less than a week, and it just arrived this afternoon! Before I can build it, I figured we would take a quick look in the box and see how the kit look!-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
How to Paint & Weather British SSC15 Olive Drab | Standard Weathering Procedure Ep.7 For Model Tanks Panzermeister36 2022-08-06 | Today we will look at how I painted and weathered the SSC15 British Olive Drab finish on my Tamiya M10 IIc Achilles Tank Destroyer. This project had a tight deadline, so we didn't try anything radically new in the video, but we still ended up with a very nicely weathered result. Hope you enjoy!-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Bench Update | 1945 StuGs & M10 Achilles | IPMS 2022 Nationals Haul Panzermeister36 2022-07-30 | The full painting and weathering tutorial on my M10 IIc Achilles is not yet ready, so I'll give you guys a quick channel update this week on some upcoming projects and also what I got at the IPMS 2022 Nationals last week!-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Full Build Review Tamiya M10 IIc Achilles Plastic Posse Podcast M3/M4 Group Build Panzermeister36 2022-07-16 | -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
E.T. Model Panther Tracks Revisited (What 1/35 3D Printed Tracks are Best? | Review Part 1.5) Panzermeister36 2022-06-27 | I bought my original set of E.T. Model 3D Printed tracks in March when they were brand-new on the market. Well, apparently they were so brand-new that I got a defective initial batch. These tracks on the market today are much better!Thank you to E.T. Model for providing me with a proper set for this review. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
What 1/35 3D Printed Tracks are Best? | Review Part 1 Panzermeister36 2022-06-18 | And by the time I had edited this video, there are 13 companies, not 12...I hope you enjoy this review. There are a lot of options on the market now, so maybe this will help you narrow it down a little. If you have any questions, feel free to ask below and I will do my best to answer!-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comMusic by: Sam Kuzel: www.soundcloud.com/samkuzel"William Alone [Extended]"DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Realistic HO Scale Gondola Weathering | Model Railroading Tutorial Panzermeister36 2022-03-26 | In this video I'll show you have to weather a modern HO scale gondola using some very basic effects. We'll look at an acrylic fade, two-colour chipping and wear effects, and using an oil paint for dust effects. I'll also briefly cover application of graffiti and FRA reflective striping for the modern-day look. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comMusic by Luke Steele: soundcloud.com/lukeysteele1-1DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Bench Update! Panzermeister is Back... Panzermeister36 2022-03-24 | See you at Heritagecon 14 this weekend in Hamilton, Ontario!After a few busy years and a three moves, I'm all settled in with a new workbench and ready to get back to making regular content. This video will be an update on a few current and future projects, a brief bench tour, and a first look at my model railroad. If you have anything you want to see me cover in a video, let me know!-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
The Ugly Jagdpanzer Post-Build Review: Pz.Kpfw.IV L/70 (A) Final Production (Dragon 6784) Panzermeister36 2022-01-15 | Today we will summarize the build of Dragon 6784 Pz.Kpfw.IV L/70 (A) Final Production. A hideous vehicle for sure, but also a cool one...and this boxing does provide some unique late-war features for the build. RochM 3D printed return roller stands: http://www.rochmmodel.com/product/RP/RP35009.html-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
How I use Reference Photos to Paint Model Tanks in 1/35 Scale Panzermeister36 2022-01-02 | I had a few questions recently about where I get references for painting my models. We will discuss that today as I start the painting and weathering on my latest Dragon StuG III kit. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/panzermeister36Support me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comMusic by: Sam Kuzel: www.soundcloud.com/samkuzel"William Alone [Extended]"DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Panda Plastics Sherman Tracks Review Panzermeister36 2021-10-30 | This video will be a quick review of Panda Plastics Sherman tracks. They have a bunch of different sets that include some unique track types. These are plastic workable tracks that come on sprues with a little clean up required. As a Sherman should use 79 links per side (M4A4 uses 83), these sets will give you about 20 extra links as well. These tracks fit on Tamiya, Dragon, and Asuka/Tasca kits, and likely others too. http://shermantracks.com/index.html-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
When Dragon = Frustrating Post-Build Review: Pz.Kpfw.I Ausf.B mit Abwurfvorrichtung 6480 Panzermeister36 2021-10-23 | Nothing says a modern Dragon kit like confusing instructions, misnumbered parts, missing steps, details absent from the vehicle, and a mix of new and old parts that don't fit.Hope you enjoy my post-build review of Dragon 6480 Pz.Kpfw.I Ausf.B mit Abwurfvorrichtung. In this video we will look at how to tackle this kit. I'll guide you through the instructions and point out all the improvements and corrections I made. But, the most important step is just to not buy this kit at all and instead buy the Takom kit. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Finally a Decent Modern Dragon Kit StuG III Ausf.G May 1943 Production mit Schurzen (Dragon 6578) Panzermeister36 2021-10-02 | Today we will look at Dragon 6578 -- StuG III Ausf.G May 1943 Production mit Schurzen. This kit builds up an excellent Kursk-era Sturmgeschutz. In this video I will point out any issues I encountered with the instructions, fitment of the parts, level of detail, and also historical accuracy of the vehicle. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
How to Weather an HO Scale Modern Covered Hopper Panzermeister36 2021-09-25 | Today we will weather a modern covered hopper. I'll show you how I patched the roadnumber, applied some chipping, weathered with washes, and added some fading, dust, and rust with the airbrush. @DansRailroad2011 Dan's Custom Trains' video that helped me chip the "Peavey" lettering:youtube.com/watch?v=gVxoP8agogASome of my inspirational photos for this project:http://www.rrpicturearchives.net/showPicture.aspx?id=3527088http://www.rrpicturearchives.net/showPicture.aspx?id=856173-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
1-Day Full Paint and Weathering 1/35 German Winter Camouflage Just the Basics Panzermeister36 2021-08-21 | In 2020, at the beginning of the Covid lockdowns, my local Ottawa IPMS chapter decided to hold a group build over the May long weekend. The point of the build was simple -- this was a "Blitz Build" in which we had to complete the entire build, paint, and weathering over the course of the long weekend (Friday 6PM to Monday end-of-day). This video is Part 2 where we will look at the painting and weathering I did on the final day -- Monday. Last week's video looked at the assembly of the kit over Friday to Sunday:youtu.be/1y2Lb1cI_74-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comMusic by: Sam Kuzel: www.soundcloud.com/samkuzel"William Alone [Extended]"Luke Steele: soundcloud.com/lukeysteele1-1DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Lets Blitz Build a 1/35 Dragon King Tiger in a Weekend! Panzermeister36 2021-08-14 | In 2020, at the beginning of the Covid lockdowns, my local Ottawa IPMS chapter decided to hold a group build over the May long weekend. The point of the build was simple -- this was a "Blitz Build" in which we had to complete the entire build, paint, and weathering over the course of the long weekend (Friday 6PM to Monday end-of-day). This video is Part 1 where we will look at the assembly of the kit over Friday to Sunday. Next week's video will look at the painting and weathering I did on Monday. Stay tuned!-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comMusic by: Sam Kuzel: www.soundcloud.com/samkuzel"William Alone [Extended]"Luke Steele: soundcloud.com/lukeysteele1-1DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
REVIEW | T-34 Shock: The Soviet Legend in Pictures Francis Pulham and Will Kerrs Panzermeister36 2021-07-30 | Today we will take a brief look at this recent book released by Fonthill Media. With more than 500 pages and nearly 600 images, this book is full of inspiration for the T-34 modeler. The well-organized chapters, diagrams, and photo captions also provide the technical information to clarify the historical mess of T-34 variants, factory features, and production changes. And it's a modelling reference book that's actually reasonably priced. At the time of posting this, it's currently on sale 20% off on the publisher's site: https://www.fonthill.media/products/t-34ISBN: 9781781558461-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Masterclub Metal Tracks Review and Assembly MTL35012 & MTL35094 Panzermeister36 2021-07-09 | Today we will look at metal tracks from Masterclub. This video is a little longer than I expected, but I demonstrate assembly of a Panzer III / IV type track and also a King Tiger type track. There are some differences in my assembly method between these tracks due to the different sizes. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36The tank-themed cutting mat is by Tankraft:tankraft.comDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Panzermeisters Definitive Review of TAKOM StuG III Ausf.G Early Production (BLITZ line #8004) Panzermeister36 2021-01-30 | Today will be my long-awaited review of Takom's recent release -- the StuG III Ausf.G Early Production (kit no. Takom 8004). SUMMARY:As part of their Blitz line, this kit is meant for simplified assembly that can be done in a weekend, maybe even by a beginner. That is true for this kit, without sacrificing much detail (apart from the tool clamps looking a little weak). The link-and-length tracks and minimal PE also support this quick build idea. However, the kit includes 5 small PE parts which are tricky to fold, especially for beginners...but you could always just leave them off :)The kit has great weld detail, crisp bolts and rivets, a one-piece barrel, and the included PE vents and copper tow cable are excellent. Fit is overall perfect, with the exception of the wheels (7:29) and gun barrel (26:31) having some interference that is easy to solve with a little sanding or trimming. A few points in the instructions show putting on parts in an order that I would not recommend. For example, in Steps 4-5 I would recommend assembling the rear armour (M33, M17, M13) in Step 5 first, then mounting the PE vent (TP1), and then putting on the parts shown in the bottom half of Step 4. And in Step 8, when mounting the tow cable, do it AFTER putting on the S-hooks (M9+M10) and fender supports (M58, M35). I have a few other tips, like the front half of the loader's hatch should prop open the loader's MG shield, and in the last step, it's much handier to glue part N11 onto the roof, not onto the superstructure, as gluing it onto the roof makes it removable so painting the gun is easier. In terms of historical accuracy, the kit is on par with Dragon 6320 as it is overall quite good, but gets a few minor things wrong. These include the wrong type of rear light, underscale smoke launcher barrels, a missing tow point on the rear hull, and a slightly incorrect cupola (as historically, these early vehicles had the cupola assembled wrong in early 1943). These are minor, so you don't have to worry about them as the kit builds up into a beautiful early StuG III G!On my build, I fixed the historical errors, added some detail by replacing the kit tool clamps with 3D-printed MJ and plastic ModelKasten clamps, and I also added some small PE chains. In addition, to model a battle-damaged vehicle, I added a resin damaged wheel and dragon empty spare wheel holders. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
KV Tracks Part 2: Ebay Boogaloo SECTOR35 Pre-Assembled Metal Tracks Panzermeister36 2021-01-10 | Today we will review Sector35 pre-assembled KV tracks. These are pretty slick!-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
How to Brush-Paint 2 Colour Chipping Effects Panzermeister36 2020-11-21 | Today we will look at some nice and easy brush-applied chipping effects. Enjoy!Check out Scale Studio's video: youtu.be/VzzLCRMPp8k-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
HO SCALE Covered Hopper Paint & Weathering Tutorial (basic rust, patches, graffiti) Panzermeister36 2020-11-14 | Nothing says the 2010s like a grey repatched covered hopper with rust, safety striping, and some graffiti. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
How to Paint German Camouflage - PRE-WAR and EARLY-WAR Panzermeister36 2020-10-24 | Hello. Today we will continue to look at painting our prototype StuG III. Since this vehicle was built around 1937, we get to have more fun than just the traditional Panzer Grey finish; from 12 or 19 July 1937 until 31 July 1940, German tanks actually had brown camouflage applied over the grey. Therefore, these prototype StuG III, and StuG III Ausf.A, and the first month of StuG III Ausf.B production all had this cool brown-over-grey finish. Scale Studio's StuG painting video: youtube.com/watch?v=ANAKr63LT2U&feature=emb_title-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
How to Paint Partial StuG Interiors - PRE-WAR and EARLY-WAR Panzermeister36 2020-10-03 | Hello. Today we look at painting interiors for very early war German vehicles. For anything mid- and late-war, the process is the same...just all the bits I painted blue-green should be left as red oxide primer. The line between the lower red oxide/blue-green and upper ivory colours also changes around; sometimes only the floor is red. Reference photos will help you infinitely here as I still don't know exactly how the transition line placement works. Scale Studio's StuG interior video: youtu.be/AAtO7G7STUsDavid Parker's Pz IV interior: facebook.com/groups/920071714702418David Byrden's great website for some interior colour reference: http://byrden.com/panzers/Colours/index.html-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
MJ Miniatures 3D Printed Tool Clamps Panzermeister36 2020-08-22 | Another product review! 3D printed accessories are a great new thing in our hobby and they are certainly easier to work with than most photoetched sets. https://www.mj-miniatures.co.kr/product-page/1-35-wwii-german-clamp-tool-set-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Buyer Beware: Chuangzheng-Model Copper Metal Tracks (eBay Surprise) - CZ35001 KV/IS Track Panzermeister36 2020-08-01 | I ordered R-Model Metal Tracks on eBay. I got these instead. I still want R-Model tracks. Also, Chuangzheng-Model has zero online presence at the time of me filming this video. I presume this is their first release, being kit number CZ35001 (1/35 scale, 1st product). That, or this is some very elaborate scam. Well, since they are here, I decided I would review these very odd copper-plated metal tracks...before I ship them back for replacements. R-Model, please. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Lets Weather a Captured KV-1 (Beutepanzer) in 1/35 Scale | Standard Weathering Procedure Ep.6 Panzermeister36 2020-07-25 | Today we will look at weathering a very interesting subject - a captured (and thus repainted) KV-1 is German use. This will give us some interesting opportunities for layering chipping effects, and make the plan panzer grey a little more interesting. Enjoy!-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by:Luke Steele: soundcloud.com/lukeysteele1-1Sam Kuzel: www.soundcloud.com/samkuzel "William Alone [Extended]"0:00 Intro1:36 Fixing up a 2016 Paint Job3:36 Worn Steel Effects4:53 Detail Painting6:02 Chipping Effects11:48 Oil Pinwash15:25 Oil Dust Effects20:34 Oil Filter22:02 Mud and Earth Effects26:53 Blackening Metal Tracks28:31 Muddy Tracks29:50 Metal Track Wear30:19 Track Installation31:21 Speckling Effects33:13 Rusty Spare Tracks34:37 ConclusionDISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Lets build a DAK Diorama: Battle of the Salient, Tobruk 1941 Panzermeister36 2020-07-11 | Today we will look at how I built a fairly basic diorama base for my DAK Panzer III Ausf.H by Dragon. I hope you enjoy! I had not built a diorama in years, but this makes me want to do them more often :)-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by:Luke Steele: soundcloud.com/lukeysteele1-1Sam Kuzel: www.soundcloud.com/samkuzel "William Alone [Extended]"DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
DAK Panzer Commander - 1/35 Figure Painting Tutorial (...after a four year absence...) Panzermeister36 2020-07-04 | After a 4 year absence I am painting a figure once again! We will look at brush painting clothing with AK 3rd Generation Acrylics and shading flesh with some oil paints. Nothing too special but maybe some of you can learn something new today. I will be painting more figures soon. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by:Luke Steele: soundcloud.com/lukeysteele1-1DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Paint & Weather Africa Korps Pz.III Ausf.H | Standard Weathering Procedure Ep.5 (For Model Tanks) Panzermeister36 2020-06-27 | Today I will show you the full painting and weathering process on this Dragon 1/35 scale Panzer III Ausf.H Late Production. I've modeled a vehicle of the 8th Panzer Regiment, 15th Panzer Division in North Africa during WWII, but everything I show can be applied to any tank. I hope you enjoy! If you have any questions, please post them on below :)-------------------------------------------------------------------------Follow me on Instagram: instagram.com/panzermeister36 My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panel Support me and my videos on Patreon! patreon.com/Panzermeister36 Some of the music was by: Luke Steele: soundcloud.com/lukeysteele1-1Thank you Luke!0:00 Intro1:43 Priming2:14 Panzer Grey Base Coat3:46 Tropical Camouflage Coat7:30 Chipping to Reveal Grey10:59 Varnish and Decals13:45 Detail Painting16:50 Enamel Pinwash20:07 Matte Varnish20:18 More Detail Painting21:45 Dust Effects (Acrylics)27:01 Rusty Spare Tracks29:27 Dusty Tracks31:39 Engine Grime35:15 Dust Effects (Pigments)37:40 Conclusion DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Final Reveal: DAK Pz III H at Tobruk, 1941 Panzer III in Africa Buddy Build with Hamilkar Barkas Panzermeister36 2020-06-20 | Hopefully YouTube doesn't throw a fit if I include some of my reference photos in the video...-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
How to Weather US Olive Drab - Dragon M4A3E8 Un-Easy 8 Panzermeister36 2020-06-19 | Today's video is a much requested topic. We will look at how I apply some initial weathering on a US Olive Drab finish. This is a little unique in terms of how it weathers, compared to what I usually show on this channel. My build review on why you SHOULD NOT buy this kit: youtu.be/eDJgGrIl_is-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by: Sam Kuzel: www.soundcloud.com/samkuzel"William Alone [Extended]"DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Completed - Panzer III in Africa Buddy Build with Hamilkar Barkas Update 4 Panzermeister36 2020-06-13 | Today is the final update on the project, in which we will look at how I applied texture and scenery to the diorama. -------------------------------------------------------------------------Hamilkar Barkas' update on his diorama: youtu.be/5dcYDaPKAPgFollow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Panzer III in Africa Buddy Build with Hamilkar Barkas Update 3 Panzermeister36 2020-06-06 | Today I will update you on the construction of the diorama, and also on how I painted a figure. Check out Hamilkar Barkas' Video Update: youtu.be/CGViov1Podc-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Panzer III in Africa Buddy Build with Hamilkar Barkas Update 2 Panzermeister36 2020-05-30 | Today I will show my painting and weathering process for this Dragon Panzer III H of the Afrika Korps. Check out Hamilkar Barkas' Video Update: youtube.com/watch?v=64hMWNTpU7w--------------------------------Follow me on Instagram: instagram.com/panzermeister36 My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panel Support me and my videos on Patreon! patreon.com/Panzermeister36 DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
NEW Tamiya German Camo Paints DAK & Tri-Colour (XF-92, XF-93, XF-88, XF-89, XF-90) Panzermeister36 2020-05-26 | Today's bonus video will take a look at the two brand new Tamiya German DAK Paints XF-92 and XF-93. We will also check out the other new Tamiya paints that have been out for about a year now: XF-88, XF-89, and XF-90. -------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Panzer III in Africa Buddy Build with Hamilkar Barkas Update 1 Panzermeister36 2020-05-23 | Today we look at my build process for improving this Dragon Panzer III H of the Afrika Korps. Check out Hamilkar Barkas' Video Update: youtube.com/watch?v=Wl9IkjPRD_g--------------------------------My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Back to Basics Mud Effects on Tiger I - 506 sPzAbt 1944 Panzermeister36 2020-05-08 | Hmm, "back to basics" might be a good idea for a series...Don't forget Uncle Night Shfit's video this week: youtube.com/watch?v=rcL3DyKDgAk-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by: Sam Kuzel: www.soundcloud.com/samkuzel"William Alone [Extended]"Luke Steele: soundcloud.com/lukeysteele1-1DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Model Tank Engine Oil & Fuel Stain Effects - 506 sPzAbt 1944 Panzermeister36 2020-05-01 | This Tiger still has fuel left, clearly....Don't miss Uncle Night Shift's Tiger video this week:youtu.be/I07BuMDHhyI-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by Luke Steele: soundcloud.com/lukeysteele1-1Thank you Luke!DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
The Panzermeisters Finished Models - Quarantine Challenge Pt.2 Unfinished Models Boogaloo Panzermeister36 2020-04-26 | Playlist of other YouTube Modeller's Quarantine Challenge Videos:youtube.com/playlist?list=PLD8gtuLaOguv4EpXZwJxZjIJQk2z-yRGi-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Earth & Dust Effects with AMMO Oilbrushers on Tiger 1 - 506 sPzAbt 1944 Panzermeister36 2020-04-24 | Today we will be applying some nice and easy effects on our tank. I will use a couple of Mig AMMO Oilbrushers to simulate built-up dirt and dust. No pigments, since those would get rubbed off anyways...Uncle Night Shift's Tiger video this week:youtube.com/watch?v=rS3htKs2JQE-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by Luke Steele: soundcloud.com/lukeysteele1-1Thank you Luke!DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
The Panzermeisters Workbench - Quarantine Challenge Panzermeister36 2020-04-22 | Today you all get to see more than usual...my full workspace area, my basic tools, my paints, my weathering products, and my stash. I was nominated for the Quarantine Challenge by Семён from the Channel "Scale Journal":youtube.com/channel/UCgu1sPjD-u0CQwFPEPXtEhAPin vice was sent to me by Chris from the Channel "Braille Scale":youtube.com/channel/UCJYgmZZjMEO4s_-4viXYDUQMy Badger 105 Patriot was sent to me by Brett G:youtube.com/channel/UC6tSuMWmY5op0kZcVzWJ09AFor the Challenge I nominate Adam from "Adam Mann 3D Scale":youtube.com/channel/UCbq6MuOPYQ96EUwKqJhocAQAnd I also nominate Shane from "Shane Smyth - Scale Models":youtube.com/user/longlance67-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Oil Dot Filter & Colour Modulation on Tiger 1 - 506 sPzAbt 1944 Panzermeister36 2020-04-17 | Yeah, I'm not sure why I called the loader's periscope the "gunsight" like 3 times in the video. Oh well. Check out Uncle Night Shift's video for more progress on his own Tiger 1 project: youtu.be/oVXGQ63KMIA-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by Luke Steele: soundcloud.com/lukeysteele1-1Thank you Luke!DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Realistic Rust Effects on our Tiger 1 - Exhausts & Track Armour - 506 sPzAbt 1944 Panzermeister36 2020-04-10 | Today we will be applying some realistic rust effects to our Dragon Tiger 1 in 1/35 scale!Uncle Night Shift's video: youtube.com/watch?v=XpTeD_ZDpJAI have some other videos if you'd like to see more on this topic. Weathering plastic spare track links: youtube.com/watch?v=EBm9Xm69MpIWeathering exhausts: youtube.com/watch?v=kViP1O3DYwc-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36Music by Luke Steele: soundcloud.com/lukeysteele1-1Thank you Luke!DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
Painting 1/35 Panzer Tools and Accessories - 506 sPzAbt 1944 Panzermeister36 2020-04-03 | Not exactly the most exciting step, but it's part of the process! Today we will look at what colours to paint the tools and details on German armour. Reference pictures: facebook.com/groups/340301663065416/permalink/890902484671995Uncle Night Shift's video: youtu.be/ePh_-SgSUmg-------------------------------------------------------------------------Follow me on Instagram:instagram.com/panzermeister36My Facebook Page: facebook.com/groups/340301663065416/?ref=aymt_homepage_panelSupport me and my videos on Patreon!patreon.com/Panzermeister36DISCLAIMER: I am not paid to promote any specific products or brands; I just use the products I find work best for me through my experiences. There is no reason for me to promote a bad product, as then I would not enjoy using it, not like the result on my model, and not be proud of publicizing it in a video. There's also no point in me doing this to keep up relations with a company if the only benefit would be getting more of the same products that I didn't like. I have not used every product out there, but from what I have used, I keep using the products I like, and that's why I use them in my videos. You can use whatever other products you would like to and you can feel that they are better - that is your opinion, and is perfectly fine by me, thus I hope that feeling is reciprocated.
