Making Quality XLR Cables #5 - Best Soldering Irons (Public) Dave Rat 2026-09-25 | Making Quality XLR Cables #5 - Best Soldering Irons (Public)
Suicide Plug Solar Panels? Dave Rat 2024-01-12 | the video discusses the process of generating solar power for a residential home by using solar panels and an inverter to convert DC power into AC power. They also talk about the importance of using specific wall plugs to distribute the DC power to the inverters. The system is comprised of 4 160-watt panels with a total wattage of 640 watts and two panels per feed. It's important to check with local authorities before installing the system to ensure compliance with any rules and regulations. The speaker then proceeds to install the solar panels using a portable lean-to setup. They discuss the use of cable management and how connecting solar panels to a circuit breaker regulated by a 15 amp circuit is safe. The speaker ends the section by plugging in the solar panels and expressing excitement to see what happens.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:44 Solar Prices01:26 Balcony Solar02:59 Suicide Solar Plug04:40 How Much Power06:05 The Solar Power System07:25 Hooking up to test08:11 Solar Lean To09:07 Safety Test10:29 Outro
Sonnect Soundwire USB to XLR Cable Test & Shootout Dave Rat 2023-12-24 | Is the Sonnect Soundwire the best USB to XLR cable ever made? Not sure but lets compare it to products that are often used. There are loads of bulky boxes and rack units out there but the convenience of a an all in one cable is super desirable for touring and travel and ease and speed. Let's check out and test the Sonnect Soundwire USB-C to XLR transformer coupled digital audio conversion cable.I compare the Soundwire to the the Apple headphone adapter as well as to another brand XLR to USB-c and another USB to mini adapter. The results are quite interesting as I test for frequency response, noise, line balancing and the ability to tolerate phantom power.youtube.com/watch?v=_ENUtonOyv0If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.comhttp://www.soundtools.com00:00 Introduction01:31 Test Setup02:23 Laptop Mini Plug Out High Freq Test03:49 Generic USB to Mini High Freq Test04:39 Apple USB to Headphone Adapter High Freq Test05:11 Generic USB to XLR High Freq Test06:24 Sonnect Soundwire High Freq Test08:56 Noise Tests10:26 Transformers11:02 Low Frequency Tests12:17 Phantom Power Tests14:53 Summary
Vegas Sphere System - Hear Holoplot X1 Demo Dave Rat 2023-12-05 | The Hear Holoplot X1 Demo video showcases the Hollow Plot system, an innovative audio technology that uses a multitude of drivers to create various effects, such as wavefront synthesis, beam steering, and coverage control. The system features a variety of speakers that can be arranged vertically, horizontally, or in both directions. The video presents a demo of the Holoplot X1, an advanced audio technology capable of creating a surround sound experience through the use of reflection and virtual sources, as well as challenges associated with using this technology, including the time delay for sound travel and the need for high resolution and efficiency. If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
NL-4 Speakon Discontinued - New Safety Lock Version! Dave Rat 2023-11-25 | Neutrik NL-4 connectors as we know them are all being discontinued. The new version costs more, is better built and has a child safet5y lock that needs a special tool.Lets take a look at the new connector, the $90 tools they sell to open it and some work arounds.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:25 Old versions01:13 New version02:40 Safety lock03:30 Tool to open05:50 Made a tool06:51 Bypass safety lock08:31 Why new safety is needed09:55 Outro
Modifying Sm58 To Reduce Plosions Dave Rat 2023-11-13 | In this video, the speaker explores modifications to the Shure SM58 microphone to reduce plosive sounds. They test techniques like foam, tape, and nylon mesh, comparing them to the unmodified microphone. The most effective modifications involve stacked discs and nylon mesh with foam. Further experimentation with different mesh types is recommended. The video demonstrates the complexity of modifying the SM58 and includes frequency response analysis and testing with pink noise. While the modifications show promise, there's room for improvement, especially in mesh selection. Viewers are invited to try these modifications and provide feedback.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction02:07 SM58 Design03:30 Goals and Test Setup04:33 Measure Before Modification05:45 P-Pop Creator06:24 Reference Curves07:28 P-Pop Test Modified Mics08:36 Weed out the Weak Ones14:56 Hear the Best Modification17:40 Modification Description19:08 Outro
Point Sources Are Ideal... Or Are They? Dave Rat 2023-11-07 | Compares point source versus line array subwoofer setups. Point sources are often seen as the ideal radiating method and models various subwoofer array designs showing the point sources may not be optimal for some or many applicationsIf you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:23 Creating Point Source Sub01:44 Reference Probes03:46 2 Box Arrays04:40 4 Box Arrays05:42 8 Box Arrays06:43 16 Box Arrays08:56 Increasing Point Source altitude10:56 Summary
WWII Artillery Shell Speaker Build! Dave Rat 2023-10-27 | This video showcases the transformation of a 90 mm World War II artillery shell into a unique and beautiful speaker. The process involves removing the shell's primer, designing speaker components with SolidWorks software, and crafting a stand shaped like a swan. The speaker system includes a subwoofer and full range driver with both passive and active modes. Insulation is used to create standing waves for improved sound quality. The design aims to combine art and functionality, and the speaker system features Bluetooth connectivity for versatility. The creator also discusses the emotional significance of this artwork and its potential use in artistic endeavors.Speaker Test Music:Huge thank you to J.T. O’Neal and Riarosa for the music!Band : Riarosa Song: Better Than NothingProduced by: J.T. O’NealMixed by : Brian EdwardsMastered: Voyager MasteringBetter Than Nothing youtube.com/watch?v=X8YKLwPK3Mgyoutube.com/@UCG2K0fG2yXHTKIfqlwWCx1Q instagram.com/riarosabandriarosa.comopen.spotify.com/artist/5Rj6VDIagmf2GV76KfRCcBfacebook.com/RiaRosaBandmusic.apple.com/us/artist/riarosa/1373348634If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:31 Remove the primer01:52 Designing in Solidworks02:20 Stepcraft CNC Cut the enclosure04:51 Kerf Bends and Glue06:40 Wood Prep and resin09:16 Artillery Shell Prep11:24 Components12:39 Speaker Modify13:30 Prep, port and paint14:50 Pocket Clio Calc Thiele Small15:22 Assemble17:29 Low Freq Test17:59 Concept and Voice test20:47 Music Test22:25 Outro
Comparing The Sound Quality Of Different Pro Audio Subwoofer Arrays Dave Rat 2023-10-08 | The video "Audible Subwoofer Predictions" explores different subwoofer array configurations and their impact on sound quality and coverage. Discusses how different sub-arrays have tonal and coverage differences based on the arrival times of the subs and explores various setups, including delayed arc, end fire, and cardioid configurations. The effectiveness of each setup depends on the specific listening position and individual needs. The speaker also introduces a tool that can recreate sub-array sounds at different listening positions and assess the tonal balance between the sub and high.00:00:00 In this section, Dave Rat discusses the limitations of visual predictions for sound quality versus coverage and introduces a method for creating audio predictions of subwoofer arrays. He explains the three main configurations of sub-arrays and how they have tonal and coverage differences based on the arrival times of the subs. While he acknowledges that there is good prediction software available, he argues that audio predictions will provide a better understanding of sound quality and help prioritize it over coverage. 00:05:00 In this section, the speaker talks about how different subarrays have different levels of efficiency, with a bunch of subs at the same time close together being the most efficient, while a delayed arc set up with increased delay times can reduce the overall efficiency of a system. He also talks about how the difference in decibel levels between subarrays can be significant and may affect the impact of a show, and discusses his process of finding a way to demonstrate these differences in sound between various subarrays and listening positions using Sound Vision and an X32 console with programmed levels and time delays.00:10:00 In this section the speaker describes a method of listening to the different sub-arrays from various listening positions using a prediction software and a grouping of four channels per sub-array. The software provides a visual representation of the electronic summations which the speaker then reproduces as a sonic representation. The differences in sound between various sub-arrays can be listened to in a virtual version of the live setting with one scene saved for each listening position. The speaker also discusses the limitations of the method and the impact of different sub-arrays on frequency response. They demonstrate this by first listening to an array of four subs spaced evenly, followed by a configuration of four subs with outer subs delayed six milliseconds for increasing horizontal dispersion, and finally, stacking two subs per side to see the differences in sound.00:15:00 In this section, the speaker tests different subwoofer setups at different angles and distances to see how the sound changes. They test a variety of setups, including four evenly spaced subwoofers, a delayed arc, end fire, and cardioid setups. They note that there are trade-offs to each setup, including differences in volume and frequency response. Ultimately, the effectiveness of each setup depends on the specific listening position and individual needs.00:20:00 In this section, the speaker discusses the different subwoofer configurations in various listening positions. By moving the subs out farther apart, they have gained back some volume and reduced interference with each other, ultimately becoming beneficial. The third listening position is especially crucial, as two-thirds of the audience is likely to be in the outer third on either side. The speaker explores various subwoofer setups and time delays, noting how each one affects coverage, volume, and efficiency. The end fire narrow cardioid seems to be the optimal configuration for this listening position, as it causes the least cancellation while still reducing low-end on stage.00:25:00 In this section, the speaker discusses different subwoofer configurations on stage and how they affect stage energy and sound quality. Initially, the speaker uses a simple array that produces significant output on stage and creates a zipper sound. However, by adding a delayed arc and end fire to reduce energy on stage, the sound quality is improved and the coverage is widened. The speaker also uses cardioid arrays and improves upon previous configurations by adding distance between the subs. The new configurations significantly reduce stage energy and provide better sound quality.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
How to Fix Moldy Tchibo Coffee Machine Dave Rat 2023-09-10 | This YouTube video discusses a common problem with mold buildup under the cover of a Tchibo coffee machine. A solution by removing a beauty plate and ventilating the cover. Additionally, the YouTuber briefly mentions a coffee stand they created that simplifies bottle filling and offers to share the design. They demonstrate the process of drilling holes in the plate using Fusion 360 software and then attaching it to the coffee machine. If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:24 Removing the beauty plate01:04 Coffee Stand01:39 Model in Fusion 36002:04 CNC Holes03:01 Finished Plate03:32 Outro
Does Proper Mic Technique Really Exist? Dave Rat 2023-08-29 | The video explores different mic techniques using four different microphones. Discuss the concept of proper mic technique and suggest that it is subjective. Demonstrate techniques such as slight distance, lips to the grill, and cupping of the microphone. Also emphasize how the technique can affect sound quality and add complexity for sound engineers. Overall, the different ways in which mic technique can be employed to enhance or modify sound.Microphone techniques like cupping, which narrows the sound range. Testing a Coles 4104 microphone that has a lip bumper to help maintain the correct distance between the microphone and the speaker's lips. Various techniques, such as singing over the microphone, speaking far away and then getting closer, and moving side to side, are tested. Dave introduces background noise by using a compressor and compares the performance of different microphones, including the Shure SM58, Heil PR35, Audix OM7, and the Coles 4104 mic. If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:22 Shure SM58 near far, cup and off axis03:17 Heil PR35 near far, cup and off axis04:32 Audix om7 near far, cup and off axis05:18 Coles 4104 near far, cup and off axis06:39 Test with Compressor06:56 Shure SM58 with Background Noise07:13 Heil PR35 with Background Noise07:30 Audix om7 with Background Noise08:00 Coles 4104 with Background Noise08:34 Retest without Air Noise09:00 Input Sensitivity10:00 Coles 4104 and F110:14 Outro
Sound Over Water is Different (Public) Dave Rat 2023-08-15 | Lets look at and listen to what happens with sound traveling over a cold body of water.And also watch fireworks!!If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:21 Listening Position00:50 Calculating the distance01:50 Sound Clarity02:32 Sound over cold water03:50 Practical Application04:40 Outro
Graphophone Fix - The Original iPod from 1890 Dave Rat 2023-08-09 | If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:23 Description and Parts02:21 Problems to fix05:21 Make a Belt07:03 Test the Belt08:34 Sealing the Diaphragm09:42 Wireless Packs11:47 Outro
Repair Shure SM57 & Beta58a Dave Rat 2023-08-03 | If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction02:00 Troubleshoot SM5703:08 Remove SM57 Grill05:57 Remove Capsule07:04 Fix Lead Wire09:49 Test Capsule10:38 Mount SM57 Capsule12:32 Attach SM57 Grill14:08 Disassemble Beta58a17:25 Assemble Beta58a19:38 Test Mic Polarity By Ear21:16 Outro
Shure Sm81 Microphone Tear Down & Repair Dave Rat 2023-07-28 | In this video, the Dave repairs Shure SM81 microphones explaining the various components and their functions throughout the process. The engineer identifies mistakes made by a previous repair attempt, and successfully tests and repairs by replacing missing parts like the high pass filter knob and a friction ring to prevent unwanted movement. Additionally, he notes the importance of a proper screw replacement in alignment and identifying a 10 dB pad circuit that's responsible for reducing output. The host concludes the video by saying he will create more repair videos like this in the future. If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:34 Quick Test01:27 Disassemble and Mic Pads03:29 Remove internals04:27 How the Pad Functions05:45 Disassemble Mic 207:10 Fix the Rattle07:52 Reassemble09:45 Test and Overload10:42 Outro
Can You Hear 1/10,000th of a Second? Updated Dave Rat 2023-07-19 | Lets listen and test how accurate resolution in our hearing is to time differentials between our left and right ears.Can you hear 1ms delay? .5ms delay? .1ms delay? Or even better?Grab you headphones and lets give a listen!If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:15 Test Setup01:09 1ms Test (1000 microseconds)01:46 Verify Left vs Right03:24 .5ms test (500 microseconds)03:37 1/10,000th of a second test (.1ms, 100 Microseconds)04:10 1/23,000th of a second (43 microseconds)04:43 Sweep time test05:34 Method to hear gear latency06:45 Outro
Mixing Chili Peppers Time Lapse Air Canada Centre 2012 Dave Rat 2023-07-09 | Here is a time lapse video or me FOH at the Air Canada Centre, Toronto April 27 2012.I did a voice over and cool cool!Monarchy of RosesCan't StopDani CaliforniaOthersideLook AroundThrow Away Your TelevisionHard to ConcentrateThe Adventures of Rain Dance MaggieRight on TimeIf You Have to AskFactory of FaithUnder the BridgeHigher GroundCalifornicationBy the WayEncore BreakAround the WorldGive It Away
Coachella Main Stage Evolution 2001 to 2023 Dave Rat 2023-06-24 | Lets take a look at the evolution of Coachella Stage and sound system, a festival that has grown to be one one of the most well known and highly regarded festivals in the world.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:37 200101:37 200202:42 200303:35 200404:47 200507:04 200608:06 200709:18 200810:29 200912:00 201012:37 201113:48 201214:23 201315:34 201416:44 201518:02 201618:39 201719:49 201820:36 201921:30 202222:15 202324:30 outro
Variable Frequency Toast Dave Rat 2023-06-17 | Variable Frequency ToastIf you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
Test 50 Pound 800 Watt Amp vs 17 Pound 6400 Watt Amp Dave Rat 2023-06-11 | Modern power amps are a fraction of the size and weight of older amps and have much higher power outputs. One of the aspects that has changed significantly is the methods used to specify output wattage as well as the way amplifiers deliver that power. Here is a test where I show and we can hear the differences between older power amp watts and newer power amp watts.Band : Riarosa Song: Better Than NothingProduced by: J.T. O’NealMixed by : Brian EdwardsMastered: Voyager Masteringyoutube.com/watch?v=X8YKLwPK3Mgyoutube.com/channel/UCG2K0fG2yXHTKIfqlwWCx1Qopen.spotify.com/track/2GFUihqFfRKvu3QfwX4UV9?si=s7uIF5dZSpK_HIPmmAp_bAinstagram.com/riarosaband?igshid=dandzd67g2mbIf you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction01:49 Test Setup02:43 Crest 4801 Lowest Freq Test03:27 Crest 4801 Highest Freq Test04:16 Powersoft T904 Lowest Freq Test05:40 Powersoft T904 Highest Freq Test06:44 Crest Power Test08:14 Powersoft Power Test09:04 Short Term Power Test10:39 Hear Power Differences wit Music12:14 Hear 400 Watts vs 540 Watts13:39 Outro
Unify Sound, Creation, Recording and Reproduction Dave Rat 2023-06-04 | The video discusses the challenge of unifying the various elements of instruments, sound reinforcement and playback to enhance engineering and sound system design. The speaker emphasizes the importance of understanding the complexities and nuances of sound capture and reproduction, including mic placement and the use of multiple perspectives. They explain the downsides of sending the same sound to multiple speakers, which creates comb filtering, interference, and summation issues. Techniques for capturing room sound during music recordings are also discussed, along with alternative approaches such as using close mic'ing and adding realistic-sounding reverbs in post-production. The speaker concludes with a demonstration of a Columbia graphophone from 1890 and talks about the mechanisms of horns as acoustic transformers. The video ends with a musical segment featuring the Death Fighter 2000 or DB.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Chaos vs Fidelity02:41 Create, Capture, Reproduce03:52 Instruments vs Point Sources05:05 Sound Systems vs Point Sources06:27 Bands vs Point Source07:06 Pure Tones vs Overtones09:55 Capturing Sonic Perspectives11:57 Multiple Identical Perspectives13:52 Creating a Single Perspectives16:15 Avoid Repetition17:58 Don't Amplify the Room in the Room21:04 Portable Music in 189026:34 Death Biter 2000
L-Acoustics L2 Hands-On & Huge Festival PA Dave Rat 2023-05-20 | Dave Rat provides a rundown on the L-Acoustics L2 system, comparing it to the K2 system and noting that it is smaller in height but outputs the same level of sound with less low-end than the K2. The L2 has adjustable panaflex coverage and wiring diagrams with 20 speakers. The L2's amplifier outputs roughly 1200-1300 watts per channel and has separate DSP. Dave Rat also introduces a laser sight unit used for determining the fly bar angle and monitoring the site angles of all the arrays in the system. Additionally, the L2 bump and bar's load rating and use in dead hang angles are discussed, along with the rotator feature for single point hanging and array rotation. The L2 system is 100-350 pounds lighter than the K2 system and offers more control.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:12 L2 Deployment & Upgraded Coachella PA01:01 L-Acoustics L2 Size02:51 Rigging, drivers and weight04:18 La7.16 Amps and DSP05:03 Connectors Horns and Tilt06:47 Cardioid & Fly bars07:34 Align Array Laser09:16 Rig Bars11:08 Rotator and Weights12:12 At Coachella13:26 Coachella Main Stage PA17:49 Extro
How Real Do the Drums Sound? Dave Rat 2023-05-08 | In this YouTube video, Dave Rat talks about a method of achieving realism in reproduced sound rather than just fidelity. He discusses the flaws inherent in conventional sound systems and recommends placing the sound source directly in the listener's acoustic environment for a more realistic experience. He then goes on to demonstrate the difference between different speakers and encourages users to acquire the tools that will achieve their desired outcome. Ultimately, he describes a method to create a sound that is realistic and not just a reproduction.00:00:00 In this section of the video, the speaker demonstrates how conventional sound systems are designed to recreate an audio environment and bring the listener into that space, but it's not entirely realistic due to the physical world we live in with regards to distance and time it takes for sound to travel. Instead, the speaker lays out a different approach where the instrument, such as a guitar player, is placed directly in the listener's acoustic environment to create a more realistic scenario. The speaker also notes that audiophile sound systems are not based purely in science but are rather an art form wrapped in science, though there is science involved and audiophile speakers can still sound wonderful.00:05:00 In this section, the speaker recommends purchasing speakers based on personal preferences for aesthetics, practicality, or sound quality. He suggests buying speakers that were used during the recording or mixing process if one wants a sound system that sounds closest to how it was intended. However, he notes that realism in sound reproduction is not the same as identical recreation or fidelity, and there are many factors that contribute to how we perceive sound. Ultimately, one should acquire the tools that will achieve their desired outcome.00:10:00 In this section, the speaker discusses the importance of realism in reproduced sound, as opposed to just fidelity. Realism means that a sound source will sound real regardless of where you are in relation to it. The concept of a sweet spot, where the sound is best, is a result of flawed sound reproduction systems. The speaker then goes on to demo a homemade four channel, four signal speaker compared to a pair of vintage speakers using higher quality gear. He cautions listeners that the speaker may not be suitable for their specific application, but that it creates a realistic sound of a drummer in the living room.00:15:00 In this section, a raw drum recording is played back through different speakers, including the real speaker without the sub, the stereo speakers, and the real speaker with the sub. The goal is to determine which sounds more realistic, not necessarily what sounds better or smoother. The platform from which sound is projected is crucial to creating sonic realism, and speakers that radiate all sound in one direction or a single sound in multiple directions are incapable of reproducing realistic sound. The fundamental platform is what determines the sound's realism, and once that is established, the sound can be refined.00:20:00 In this section of the video, the speaker expresses their fascination with creating and reproducing realistic sound through instruments. They are impressed with how effective and simple it is to make something sound real, even though the YouTube format can only capture a fraction of the full realism. The speaker notes that the difference between formats can be heard, and signs off with a reference to Spicoli McConaughey.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
Do We Want & Need Audio Compressors? Dave Rat 2023-04-28 | Why do we need audio compressors? Is not using a compressor more or less natural sounding?Dave Rat's video "Why Do We Want & Need Audio Compressors?" explains the concept and importance of compression in live sound and recording. Compression is needed to control the varying levels and limit the dynamic range to prevent distortion and ensure the sound is balanced and clear. The distance between the microphone and the sound source can cause volume differentials and bleeding from channel to channel, leading to unnatural sound. Compression can mitigate these issues and bring consistency to different instruments' sound levels. Analog and digital consoles also have different sound qualities that can be softened by using tube compressors or other methods. Ultimately, compression is an essential tool to achieve a consistent and balanced sound in live sound and recording. 00:00:00 In this section, Dave Rat discusses how microphones and the way we mic things can alter the Dynamics of the way things sound, adding noise and distortion that we normally wouldn't hear with our ears. This altered Dynamics is why compression is an important tool for recording and live sound. When an instrument is captured with a microphone, compression is needed to control the varying levels and limit the dynamic range to prevent distortion and ensure the sound is balanced and clear. However, there is a debate between using too much compression to get more level on recordings versus using compression in the live environment for reinforcement. 00:05:00 In this section, the speaker discusses the issue of volume differentials in audio recordings caused by the distance between the microphone and the sound source. The volume increase when a sound source moves closer to the microphone is magnified when the sound is amplified and played through a sound system, leading to unnatural sound. Mic distance can also affect the ratio of the instrument to the room, causing an undesired re-amplification of the room sound. Compression is a solution to mitigate the excessive volume differentials and low-end proximity effect caused by micing close to the sound source, and EQ can be used to adjust the excessive low end. 00:10:00 In this section, the speaker explains the benefits of using audio compressors to achieve a consistent sound by reducing volume differentials. While compressors can bring up the background noise in quiet parts, they can also reduce the transients of loud instruments and make them sound more realistic. The amount of compression needed depends on the system's dynamics or the design of the enclosure. The speaker also discusses how compression can help deal with inconsistencies in playing, such as bass players who have varying volumes in different notes. 00:15:00 In this section, the speaker discusses the difference between analog and digital consoles in terms of their sound quality. He explains how digital consoles are known for sounding clinical because they are good at maintaining all of the dynamics and transferring them in numbers that stay intact throughout. On the other hand, analog consoles tend to bleed from channel to channel, which softens the sound and gives you multiple versions of the same signal. This is why there is a desire for tube compressors or other methods to make digital console outputs sound more natural. The speaker then plays a slowed-down audio clip to demonstrate the alteration of dynamics and how sounds are captured, even with just a small change in proximity. 00:20:00 In this section of the video, the speaker explains that the proximity of a microphone to a sound source can have a significant impact on the balance between reverberation and direct signal, as well as distort the audio in unnatural ways. Compression is one way to deal with these issues, and the speaker demonstrates a test using a "sharp transient" tool to illustrate the effects of different microphone positions on the sound.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
Design of the new L-acoustics L2 System with Christophe Dave Rat 2023-04-18 | Chatting with Christophe who heads up the design of the L-Acoustics L-2 system. If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
Understand Impedance & Real Speaker Voice Test Dave Rat 2023-04-14 | Lets have some fun chatting about impedance while listening to the real sounding speaker vs live speakingDave Rat discusses the concept of impedance, describing it as the resistance that electrical circuits have to the flow of alternating current while simultaneously demonstrating the sound differences between real voice, his Stormtrooper Speaker and a conventional speaker. He talks about the different types of impedance in various microphones, inputs, and outputs and compares it to a wire mesh that offers low resistance to small objects and high resistance to larger ones. Dave also talks about how different audio equipment like transformers, horns, amplifiers and microphones are impacted by impedance, emphasizing the importance of using the correct impedance for speakers, as using an incorrect impedance may damage the equipment. He also uses a voice test to demonstrate the importance of using the correct speaker and impedance for optimal sound quality. 00:00:00 In this section, Dave Rat talks about audio impedance and how it is different from resistance. Impedance is frequency-dependent, so it acts like a wire mesh that offers low resistance to small objects, high resistance to larger objects, and filtered out unwanted frequencies like a high pass filter. Dave describes the different types of impedance in various microphones, inputs, and outputs and also explains that a low impedance output can be thought of as a shovel where it will pass the signal with ease. 00:05:00 In this section of the video, impedance is compared to a pile of leaves and rocks or gravel, where low impedance is like a shovel that has a lot of push but little motion, while high impedance is like a leaf blower that can move all the leaves with wind but cannot move rocks or gravel. Transformers like a gear shift in a car, convert low impedance to high impedance, and vice versa, while an audio horn is an impedance transformer that takes the low impedance of a speaker driver and converts it to a higher impedance of air. However, all transformers have their limitations, and issues like putting more load on the driver can arise. 00:10:00 In this section of the video, the speaker discusses the impact of impedance on different audio equipment, such as transformers, horns, amplifiers, and microphones. He notes that while using a transformer may provide voltage gain, it also results in a loss of bandwidth and efficiency. Similarly, horns increase SPL and efficiency, but decrease frequency response and require EQ. The speaker explains that the way to determine whether something has a low or high impedance is to put a resistance load on it and see what the impact is. He also invites viewers to check out his other videos on the subject of audio equipment and knowledge. 00:15:00 In this section of the video, the presenter begins by explaining impedance, which is the resistance that electrical circuits have to the flow of alternating current. He then goes on to discuss speakers and their importance in a sound system. The speaker converts electrical energy into mechanical energy to produce sound. The presenter emphasizes the importance of using the correct impedance for the speaker, as using an incorrect impedance can damage the equipment. He uses a voice test to demonstrate the importance of using the correct speaker and impedance for optimal sound quality.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
What Does Audio Transformer Overload Sound Like? Dave Rat 2023-04-02 | In the YouTube video titled "What Does Audio Transformer Overload Sound Like?", the speaker demonstrates the effects and sounds of an audio transformer overload, testing various audio transformer boxes, and battling with mixing consoles clipping while testing. The video also examines the difference between using a mic level or line level transformer for low-level signals and tests whether a line level transformer for a mic level signal causes any impact or distortion. The speaker concludes that the mic level transformer will only cover low-level signals, whereas the line level transformer can cover the entire scope of low to high levels, and while it may cost more money, it can be more useful in the long run. Overall, the demonstration shows how to listen for distortion and overload in audio transformers.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinHuge thank you to J.T. O’Neal and Riarosa for the music!Band : Riarosa Song: Better Than NothingProduced by: J.T. O’NealMixed by : Brian EdwardsMastered: Voyager Masteringyoutu.be/X8YKLwPK3MgAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:12 Mic level vs line level transformers01:57 Line level test setup04:26 Line level pulse test Radial Twin ISO, JS3 and Rapco ISObox07:25 Line level music test Radial Twin ISO, JS3 and Rapco ISObox10:30 Mic level transformer test setup12:37 Mic level test pulse and music13:56 Mic level vs line level transformers16:37 Outro
Does Mixing Ruin Music or Food? Dave Rat 2023-03-27 | The video "Mixing Food and Audio" presents an analogy between sound and cooking, demonstrating how the mixing of food and audio can be similar. The creator uses kitchen ingredients to represent musical instruments, blending different sounds to create a complete rhythm section. The video also explains the process of mixing music with bass and guitar to get a stereo mix and how in a live mix, things can be readjusted easily, but when producing a final recording, the mix can not be altered in the same ways. The speaker suggests that it would be better to send different instruments separately to the listener rather than mixed together, creating a more realistic and immersive experience.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
Kick Snare Bass Subgroup Compression & EFX Demo Dave Rat 2023-03-19 | Lets have a listen to using subgroup compression on kick, snare and bass. Also lets listen to snare reverb sent to groups vs left and right.This video demonstrates the use of subgroup compression for mixing kick and snare with a bass guitar, with a focus on fast attack and short release and hold times for preventing pumping sounds. The bus master feature is shown for controlling individual instrument groups such as the kick and snare or guitar, and the importance of running effects like reverb associated with an instrument back into the same groups is explained. The effects of compression and reverb on the kick snare bass subgroup are demonstrated, with examples of how the reverb dominates the mix when pushed hotter and completely drops out when pushed lower.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: ratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:11 Mr Bones01:23 Kick and Snare Group Compression03:48 Compressor settings04:59 Why I use fast attack and release05:59 Group DCA vs group level compression08:30 EFX to group vs L/R 12:17 Wrap up
Sound System Signal Flow Evolution Dave Rat 2023-03-15 | Lets look at the evolution of basic signal flow in sound systems and the advantages of bi-amplification and separate sub sendsIf you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:13 Passive Crossover00:52 Active Crossover02:02 Adding Subwoofer03:40 Mixing Instruments05:19 Separate Subwoofer Send07:31 Outro and Up Next
Which Speaker Sounds the Most Realistic? Dave Rat 2023-03-04 | Lets compare a real instrument to a bunch of cool speakers and the 4D multi-directional speaker I built in this video youtu.be/VLkQSSydXwkIf you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:31 Multi In Multi Out Speaker00:45 Omni and reflective speakers01:32 Point Source is not Real03:36 Recreating Instrument vs Recreate Environment 05:28 A speaker that sounds realistic07:58 The mic setup and real instrument09:16 The Demo Description09:44 Audix 3A studio Monitor10:10 ADC L1090/210:28 Heil ESS AMT110:52 Bose 40111:06 Storm Trooper 4D Speaker11:28 1960s Spherical Speaker11:43 NXT DML Flat Pat Panel12:02 L-Acoustics MTD10812:19 Storm Trooper 4D Speaker12:41 Live Me vs Storm Trooper 4D Speaker12:57 Rogers Studio 1 vs Storm Trooper 4D Speaker13:20 Description and summary14:55 Why Don't Speakers Sound Real?16:55 Outro
Design End-Fire or Cardioid Subwoofer Array in 5 Easy Steps! Dave Rat 2023-03-02 | Here is a quick video on how to tune and place subs for an end-fire or cardioid arrayThis includes all the math you need to create an effective directional sub array with as few as two subsThere is a downloadable PDF on the channel members Telegram channel. There is a link in the members dashboard posts.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Step 1 - Determine Tuning00:30 Step 2 - Calculate 1/4 Wavelength Distance 01:14 Step 3 - Subwoofer Placement01:33 Step 4 - Calculate Time Delay01:48 Step 5 - Add Delay and Polarity for Array Type02:41 Compare Cardioid to End-Fire Arrays03:06 Optional Step 6
Bassnectar 360 Subwoofer Sound Design Dave Rat 2023-02-24 | Lets take a look at optimizing a 360 Degree Arena Cardioid Subwoofer Coverage with a focus on extreme cancellation venue center.00:00 Intro and description02:15 Soundvision prediction 5 subs forward facing04:22 40 sub ring06:05 5 subs with 3 rear subs with no delay06:54 5 subs with 3 rear subs end-fire08:45 5 subs with 3 rear subs cardioid10:08 Adding in full ring in cardioid 13:03 Magnitude of cancellation and real world13:57 Temperature make a difference15:59 Dealing with real time adjustment of cancellation17:50 Photos of show20:49 OutroIf you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
Aux Fed Subwoofers Are Better - Because of How Mics Work Dave Rat 2023-02-11 | I explain and demo the issues with subwoofers connected to the left right outputs and show why controlling what inputs are sent to the subs is preferable, due to microphone limitations.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction01:12 Mics are flawed03:20 Diaphragm mass06:25 Mics add unrealistic low end07:56 Demo of subs aux vs subs to L/R11:31 Dont send inputs to subs that dont need subs13:18 Outro
Speakers Dont Sound Real, Lets Build One That Does Dave Rat 2023-02-05 | Speaker point sound inward toward the listener Instruments radiate sound outward away from the instrument.Lets build a speaker that radiates sound like an instrument does and see what it sounds like."The video creator aims to build a speaker that sounds realistic and replicates how sound travels from an acoustic guitar, rather than the standard stereo sound. The 4D speaker is made of four different speakers that radiate sound from different directions in PVC tubes, delivering a more realistic sound. The builder emphasizes the importance of generating sound in all directions, rather than just left-right stereo sound, which can be achieved using multiple 4D speakers to recreate the sound of different instruments in a band. The builder discusses the possibility of creating a true four-dimensional audio sound by using multiple tracks per speaker, but the biggest challenge would be for musicians to release individual tracks for the various speakers. Despite the challenges, the speaker is excited about pushing audio beyond just surround sound or inward-facing speakers."If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction01:51 The parts for the build02:45 Building a speaker that sound real05:41 Description of the speaker08:16 Listening to the 4D speaker10:48 Listen Conventional speaker12:01 4D speaker listen13:01 Radiating sound outward vs inward 14:21 The next level16:17 Outro
More Headroom Dave Rat 2023-02-03 | Digging though some old videos and found this useful advice from back on Sonic Youth Dirty tour in 1992.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
Transformers vs Capacitors DC Blocking & Overload Dave Rat 2023-01-29 | Lets look at audio transformers on Smaart and compare to capacitors at differing levelsdiscusses the use of transformers and capacitors in audio equipment, specifically for signal flow and frequency response. Transformers can change voltage-to-current ratios and attenuate signal voltage, while capacitors can block phantom power and DC voltage. Both transformers and capacitors can effectively block DC signals in the audio signal chain, although when overloaded, transformers can saturate and distort the trace, while capacitors exhibit little change in frequency response. The video presents a comparison between transformers and capacitors in handling high-level signals and their varying frequency responses. Overall, it provides an interesting analysis of transformers and capacitors in DC blocking and overload scenarios.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction01:33 Smaart01:58 Radial Twin ISO - Level and Phase03:08 Radial JS303:39 Whirlwind ISO204:24 Cinemag CMMS-304:48 DC blocking capacitors06:15 Phantom blocking07:22 Higher level signals10:07 Summary and outro
Better GoPro Sound - No External Mic Dave Rat 2023-01-19 | GoPro is known for crap sound and everyone recommends external mics which is all good if ya want to carry around extra stuff and wires and a mess.But if you just want or need to derive a decent audio file from your camera, here are some settings and a listen to the differences. Also I dive into the 3 mics on a GoPro Hero5 and what makes up the wav file.The video discusses how to improve audio quality when using a GoPro camera without an external microphone. Various audio settings, including stereo, wind, and protune, are tested and compared, with a focus on gaining up tracks and identifying the camera's three microphones. The video also offers suggestions for improving audio quality and experimenting with the raw audio tracks. By demonstrating the audio tracks in different environments and with different equipment, the video provides useful guidance for those seeking better audio quality from their GoPro camera.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction01:40 How I will test03:59 Compare settings12:05 The three mics16:50 Case vs no case18:33 Wav vs Video audio
Are Aux Fed Subwoofers Dumb or Smart? Dave Rat 2023-01-15 | Why are you sending high hat to the subs?Why would you not want separate control over the subs?Its not hard, its just smart.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
Direct Sound vs Reflected Light Dave Rat 2023-01-15 | My daughter Sammy and I discuss the huge difference between the way we see and hear the world around us.With sound we strive to ignore and eliminate reflections and with light we strive to create and focus on the reflections.The video discusses the differences between direct sound and reflected light. Sound energy bounces and reflects before reaching us, which makes it difficult for stereo sound systems to reproduce sounds accurately. The video also examines the human sensory experience and suggests that our sensory evolution and development are directly correlated to the sounds we can create. The speakers consider the possibility of extending our sensory experiences through technology and research, and also explore what constitutes hearing, including bone conduction and brain stimulation. The concept of how energy sources and energy reflections play a role in our lives is also discussed.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction01:17 Sound sources are energy sources02:45 Sound is like a field of sprinklers04:05 Reflected light info05:01 Direct sound info05:35 Direct light info06:18 Frequency receptors and reflections07:49 Multiple sources09:28 Recreate campfire using a flashlight10:46 Gathering around energy sources11:59 Sensitivity to freq ranges15:48 Hearing not with ears17:34 Outro
Different Types of Panning Demo Part #2 - Combinations Dave Rat 2023-01-08 | Part 2 Beyond Panning - Even MoreIn this video Sammy I chat more about audio panning and perception and dive into more demos and combine differing techniques.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:52 Applying panning and to live sound02:04 Speech pathology and live sound06:36 Mono, delay and compression with drums07:22 Polarity reverse one side09:39 Combining delay, EQ and compression11:45 Regular panning13:56 More on panning!!15:54 Perception chat18:30 Outro
Different Types of Panning Demo - Increase Stereo Image Dave Rat 2022-12-31 | If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:18 Sammy Studies02:33 Sammy Tour and Audio03:44 Panning06:53 Level Panning08:17 Haas (delay) Panning13:41 Using EQ to Shift the Image15:47 Compassion to Pan17:48 Outro
Better Sounding Subwoofer Arrays Part 3 - Orgasmatron & Endfire ARC Dave Rat 2022-12-23 | If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:45 Vortex (Orgasmatron) Setup05:30 Endfire ARC or Fan Setup10:43 Overview11:29 Outro and upcoming
Better Sounding Subwoofer Arrays Part 2 - Sub Arcs, Delay & End-Fire Dave Rat 2022-12-19 | If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:44 Splayed line of 8 Subs02:08 Splayed and delayed 8 subs03:57 Splayed and delayed cardioid subs05:06 Physical arc of 8 subs06:57 Physical arc of 8 cardioid subs08:01 Spaced line of subs arc delay10:29 delayed arc vs physical arc12:14 4 subs per side spaced arc14:38 2 X 2 end-fire array per side19:11 Conventional + end-fire combo array24:46 Upcoming in video 3
Better Sounding Subwoofer Arrays Part 1 - Coverage and Quality Dave Rat 2022-12-11 | This is the first in a multipart series showing simple techniques for analyzing and determining how various subwoofer arrays will cover and sound. In this and future videos you will see the issues with sub coverage and sound quality and learn some ways to improve.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:44 Sub Arrays vs Frequency04:30 One Sub07:07 One sub per side or flown line array08:42 Cancellation nodes13:37 4 wide subs per side16:07 Side coverage issues16:53 8 subs across the front18:33 upcoming Sub Vids
New Sound Bullets & Cat Box 8 are Here! Dave Rat 2022-12-09 | some boxes of Sound Bullets and Cat Box 8 came in, let's check out what's new
Do Audio Transformers Mess Up the Sound Part 3 - om7 & U89 Dave Rat 2022-12-03 | Dave Rat discusses the impact of audio transformers on sound quality, noting that his previous belief that transformers sound bad was incorrect. While transformers are extremely flat and accurate, putting them in line and attaching them to a microphone loads down the mic, causing it to move less freely and potentially cause resonance circuit issues or other tonal discrepancies. Tests on dynamic and condenser microphones show that condenser mics with their mic preamps tend to have low-frequency boosts or no effect, while dynamic mics are more impacted. Vast differences in the impact of various transformers are observed, with the Cinemag causing the least amount of change to the output signal. While some transformers may have little impact, they still change the soundIf you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Intro and setup config00:49 The sound of the actual transformers01:37 Transformers magnetism and sound02:08 What transformers do to the sound of mics03:29 Better with or without transformers04:24 Test Neumann U89 with Radial JS305:53 Test Neumann U89 with Whirlwind ISO206:32 Test Neumann U89 with Radial Twin ISO07:05 Test Neumann U89 with Crimson 1 in 2 out07:44 Condenser vs dynamic mics w transformers splits08:27 Test Audix om7 with Radial JS310:09 Test Audix om7 with Radial Twin ISO11:22 Test Audix om7 with Whirlwind ISO212:41 Test Audix om7 with Radial JS313:15 Test Audix om7 with Cinemag CMMS-214:06 Test Audix om7 with Rapco 600 ohm inline Iso14:50 Summary and outro
Do Audio Transformers Mess Up the Sound? - Part 2 Dave Rat 2022-11-26 | OK, here is part 2 where I test a Beta58, Royer 122 ribbon mic with various transformers as well as we listen to the transformers themselves. Also I do a null test of various transformers with direct signal.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Intro and recap part 100:39 Test setup02:40 Why do transformers change mic sound?03:27 Beta58 with and without ISO2 connected04:24 Beta58 with and without JS3 connected06:01 Beta58 with and without Cinemag CMMS2 connected06:43 Beta58 with and without Crimson connected07:59 Listen to Radial Twin ISO vs direct09:42 Listen to Whirlwind ISO2 vs direct10:29 Listen to Radial JS3 vs direct11:22 Listen to Cinemag CMMS2 vs direct11:50 Null transformer with direct and see differences13:18 Royer 122 ribbon mic with JS3, ISO and Twin ISO vs direct16:04 Summary of impacts on sound17:18 The reason I avoid transformer splits
Do Audio Transformers Mess Up Sound? Demo Part 1 Dave Rat 2022-11-17 | Lets see and hear the impact on the sound of having an isolation transformer connected to an Audix TR40 measurement mic and a Shure Beta 58If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:54 Transformer Specs Radial JS3, Twin ISO Whirlwind ISO202:14 Crimson, Cinemag and Lundahl02:48 Do transformers hurt the sound?04:16 The test setup06:35 Baseline curve with Audix TR40 mic and hardwire split08:41 Compare Audix TR40 into 1 vs 2 console channels hardwire09:48 Impact of Whirlwind ISO2 connected to TR40 mic11:20 Transformer alters sound of mic everywhere12:35 impact of Radial JS3 connected to TR40 mic13:53 Impact of Whirlwind ISO2 connected to Beta5815:52 impact of Radial JS3 connected to TR40 mic16:38 Outro
Making The Sound Bullet - Awesome Audio Tester! Dave Rat 2022-11-12 | While I was in Italy I dropped by Sonnect and met with David Scorteccia who designed and manufactures the Sound Bullet audio test unit.Lets see how these super cool audio testers are made.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com
Which is More Dangerous? Phantom Power, USB Power or a 9 Volt Battery? Dave Rat 2022-10-31 | Lets do some real world testing and see which is more dangerous, 48 volt phantom power, 5 volt USB power or a 9 volt battery.I will test to see which makes more noise with a speaker, which lights and LED brighter, can melt small wires, is louder when connected to a mic and which tastes the best.If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:youtube.com/channel/UC_nJM07b0k7C9CvcM-9OH6w/joinAlso check out: http://www.soundymcsoundface.comratsoundsales.comratsound.com/daveswordpressratsound.comhttp://www.soundtools.com00:00 Introduction00:59 What is Phantom01:27 USB Power01:55 9 volt battery02:07 LED Test04:44 Touch Test05:22 Speaker Test08:06 Wire Short10:47 Wired Wrong Into a Mic13:07 Eye and Lick Test15:35 Summary
