Building a custom roller for 3 piece wheels AEROWOLF USA 2020-05-06 | Decided to whip up a little roller to make refinishing these Work VS-SS wheels a little easier! ENJOY!aerowolfusa.com
NEW Fanatec X S-Chassis handbrake lever AEROWOLF USA 2024-07-06 | I've never been happy with the factory handle on this Fantec Clubsport V1.5 handbrake so I decided to create a new lever that utilizes Nissans S-Chassis handbrake boots. I made a few extra of course and they are now available over on my website! #schassis #simdrifting #shorts
Drifting the New Sprit Peaks Raceway layout in the KA-T S13 - EP13 AEROWOLF USA 2024-03-11 | The folks over at Spirit Peaks Raceway switched up the whole layout! So I had to go check it out in the KA24DET powered shop car! The video starts out with a couple changes to the overall setup before showing gopro in car footage from 2 different drift days. Beyond eager to get back out there and have another go at this!
NEW POSTCARD! AEROWOLF USA 2024-01-01 | Just added this new postcard to the mix featuing Sam Street! One of these is included with every order even those of just a single sticker!✌️🐺
Modifying my Trak Racer sim rig for drifting AEROWOLF USA 2023-12-21 | Seat time is key! I put together this sim rig a while back in hopes that I wouldn't get quite as rusty in between drift events. I was happy with the overall setup BUUUT this Trak Racer TR8 left a lot to be desired. Specifically the mount for the shifter was REALLY flimsy. This was amplied when you mounted the handbrake in vertical orientation (there was no other option) to the side of the shifter. So, I decided to modify the frame and make a much sturdier mount for these items. If I were to start over I'd likely go with a different frame/rig that was entirely made from extrusion. But this should get the job done!
Knocking the rust off at Dallesport Drift - EP 12 AEROWOLF USA 2023-07-25 | Finally made it to my first event of the year. This time at a new venue (for me) Columbia Gorge Regional Airport located in Dallesport Washington. Event organized by the folks over at @dallesportdrift. Its a small airstrip with a short 3 turn layout and I spent most of the day STRUGGLING to get an entry. Finally started to get the hang of things at the very end of the day which is always frustrating but I'll take any seat time I can get. Heres to the next one!Additional filming AND thumbnail image by the always amazing @J_cruzz1
Final Bout 5 AEROWOLF USA 2023-01-05 | Made the trek out to Shawano, WI to attend Final Bout 5!It did not disappoint.▬ Contents of this video ▬▬▬▬▬▬▬▬▬▬00:00 - Travel to Shawano WI00:38 - Hanging w/ Robbie02:35 - Evening Pit Walk04:38 - Night Drifts w/ Marcus07:33 - Day 2 - Competition09:00 - Final Pit Walk
Drift car at an Autocross event?? - EP 11 AEROWOLF USA 2022-11-30 | A couple friends were hitting up a local autocross event so I figured I might as well see how the drift car would contend! Following that I took it out for another drift event at Spirit Peaks Raceway. HUGE shout out to Jordan for filming all the exterior stuff at SPR!He can be found on Youtube and IG @J_cruzz1 I hope you enjoy the video. Thanks everyone!!▬ Contents of this video ▬▬▬▬▬▬▬▬▬▬00:00 - Car Prep00:25 - Autocross03:14 - More Car Prep03:34 - Drifting!06:47 - Lunch Break07:25 - More Drifting, trying new tires
Final Bout Special Stage NW 2022! AEROWOLF USA 2022-09-01 | Drove down to Medford Oregon for Final Bout SSNW this past April. This is the first video I've done of spectating an event so its a bit spotty but in preparation for FB5 this coming weekend I figured I'd edit this together for some practice. Enjoy!
Taking the KA24DET to Spirit Peaks Raceway - SHOP CAR - EP 10 AEROWOLF USA 2022-08-05 | Took the shop car out for it's 2nd event with the turbo! This time we went to @spirit.peaks.raceway. I was able to stretch the setups legs a bit more and get into 3rd more comfortably! Had an absolutely blast. I've never been able to put down this many laps with so little fuss from the car. A new pair of tires and we are ready to go for the next event!!Thumbnail photo by (IG) @ruffymedia ENJOY!aerowolfusa.com
First drift event with new turbo and last PARC event ever!? - SHOP CAR - EP 9 AEROWOLF USA 2022-06-30 | Took the Shop car out to its first event with the new turbo setup! (T28 w/ 550cc injectors) This also could very well have been the last drift event ever held at Pats Acres! They've had an ongoing battle with the track neighbors complaining about the sound. Incredibly sad about that news and my fingers are still crossed the figure out how to hold events again in the future. That being said the turbo was a BLAST and I can't wait for the next event. Thumbnail photo by (IG) @ap.genny! ENJOY!aerowolfusa.com▬ Contents of this video ▬▬▬▬▬▬▬▬▬▬00:00 - Car Prep02:07 - Drifting!09:32 - Outro
TIME ATTACK DATSUN S30 280Z - HANGING OUT WITH BROKEN JAW RACING AEROWOLF USA 2022-05-30 | Let me introduce you the first member of the Aerowolf "team" Ben aka @brokenjawracing and his Time Attack Datsun 280Z! ENJOY!aerowolfusa.com
S13 Repairs, Drifting and BOOST! - SHOP CAR - EP 8 AEROWOLF USA 2022-03-08 | Back at it with the Aerowolf shop car! Sorting out a couple things before taking it to Pats Acres for another drift event. Then we finally get a turbo installed, so end it all with a quick trip to the dyno. Thumbnail by: @therestingmitchfaceaerowolfusa.com
Freshly painted S13 gets new accessories and hits the track! - SHOP CAR - EP 7 AEROWOLF USA 2021-09-06 | The shop car is back from paint and Aaron/@sidewayshatch knocked it out of the park! First order of business is to slap on a couple accessories and hit the track! Thanks to @kowittbub for the thumbnail image and @rozinedits and @flashvideomagazine for the additional filming at Spirit Peaks.Now its time to sort out that clunking sound! And add more clearance for the front wheels.ENJOY!aerowolfusa.com
Welding up holes in preparation for paint! - SHOP CAR - EP 6 AEROWOLF USA 2021-06-13 | In preparation for paint on the shop car I get to shaving/welding up holes from a few various items we wont be needing: 3rd brake light, washer nozzles, antenna, side markers etc.ENJOY!aerowolfusa.com
Test fitting NEW BN Sports 180sx Type 2 body kit! - SHOP CAR - EP 5 AEROWOLF USA 2021-04-10 | Well the PS Duce kit got pretty thrashed before I could even get paint on the car so when @Koruworks posted up this BN Sports Type 2 kit for sale that was already in states, I had to snag it. Now lets test fit it!ALSO - how do you feel about the addition of the music in this video??ENJOY!aerowolfusa.com
First Drift Event of 2021! Pats Acres - SHOP CAR - EP 4 AEROWOLF USA 2021-02-09 | Took the S13 shop car out for an open drift at Pats Acres (PARC) this past Saturday. Good times were had!ENJOY!aerowolfusa.com
S13 body kit and over fender install - SHOP CAR - EP 3 AEROWOLF USA 2021-01-03 | Installing a PS Duce body kit and some Origin type 3 over fenders on the Aerowolf S13 Shop car. Then I take it out to a couple drift events and smash up those fresh bumpers! ENJOY!aerowolfusa.com
Unboxing brand new PS Duce 180sx body kit - SHOP CAR - EP 2 AEROWOLF USA 2020-04-16 | The new PS Duce body kit, sourced by Mastermind NA, has finally showed up so lets open that bad boy!ENJOY!aerowolfusa.com
Sticker restock/new colorways! AEROWOLF USA 2020-03-11 | Just got in a sticker restock from AWStickers, featuring some new color ways!www.aerowolfusa.com
First drift event! - SHOP CAR - EP 1 AEROWOLF USA 2020-03-04 | The first drift event in the new Aerowolf USA shop car! I have been slowly building this thing up over the last 8 months or so with the help of some good friends, and its time has finally come! Headed out to Pats Acres (aka Parc) for its shakedown event. Thumbnail by: IG @tylenopantsENJOY!aerowolfusa.com
Packing up AEROWOLF USA canards AEROWOLF USA 2020-02-27 | Checkout a few of the colors we offer as some canard orders are packed up.
THE LASER IS WORKING AGAIN! AND MORE NEW WHEELS AEROWOLF USA 2020-02-12 | Our trusty Glowforge laser is back up and running again! And I unpack another "new" pair of wheels for the shop car.
AEROWOLF USA - FIRST VIDEO! AEROWOLF USA 2020-02-06 | Hello world! This is the first Aerowolf USA video. Just a little behind the scenes action. Unpacking some new spare wheels for the shop car and packing up the most recent drop of visor orders. Cheers!
