The Idea GarageI designed a simple 3D-printed kerfmaker for my workshop and shared the files for FREE on MakerWorld. A few months later, while searching Amazon for a completely different video idea, I stumbled across something I definitely wasn't expecting: my design being sold as a 3D-printed product.
In this video, I'll show you what I found, why I believe it's my model, the evidence that made the discovery even more surprising, what the license on my original file actually allows, and what happened when I reported it to Amazon.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
I Found My 3D Print Being Sold on AmazonThe Idea Garage2026-10-03 | I designed a simple 3D-printed kerfmaker for my workshop and shared the files for FREE on MakerWorld. A few months later, while searching Amazon for a completely different video idea, I stumbled across something I definitely wasn't expecting: my design being sold as a 3D-printed product.
In this video, I'll show you what I found, why I believe it's my model, the evidence that made the discovery even more surprising, what the license on my original file actually allows, and what happened when I reported it to Amazon.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #Maker3 Ways to Build Shop Drawers and How to Install ThemThe Idea Garage2026-11-11 | In this video, I show you three ways to build shop cabinet drawers: pocket holes, through dowels, and hidden dowels. Then I walk through installing full-extension, soft-close drawer slides, aligning the drawer fronts, and adding the pulls.
These drawers are going into my mobile miter saw station. I cover measuring, cutting grooves for the drawer bottoms, assembling the boxes, and getting everything installed. I also share a sizing mistake caused by assuming my plywood was a full 3/4" thick and explain how I corrected it.
Pocket holes are my go-to for shop drawers, but these methods give you a few options for your next project.
Timestamps: 0:00 Intro 0:37 Measuring and sizing drawers 2:19 Cutting grooves and drawer bottoms 2:40 Pocket-hole drawer assembly 5:11 Through and hidden dowel joints 8:20 Installing drawer slides 11:42 Drawer fronts and handles 14:50 Wrap-up
Check out the HOKOLITE YZONI W5 WorkLight, its portability and focused bright light is perfect for lighting up what you are working on. - Shop on Amazon: amzn.to/4yy5ZPX - Official Website: hokolite.com
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace. π΄ SUBSCRIBE FOR NEW VIDEOS: youtube.com/@TheIdeaGarage1?sub_confirmation=1 π¬ BUSINESS INQUIRIES: TheIdeaGarage1@gmail.com π MY 3D PRINTING FILES: makerworld.com/en/@robert.darrell.?ref=youtube Thanks for watching! #TheIdeaGarage #Woodworking #DrawerConstruction #ShopCabinets #PocketHoles #DIY #ShopOrganization #MiterSawStationI Built a Full-Size Miter Station for a Small ShopThe Idea Garage2026-11-04 | I built a full-size mobile miter saw station designed for a small shop. It stores in just 39 inches of space, but expands to 9 feet wide in seconds when I need the extra support.
This build includes six drawers for storage, fold-up wings with pull-out extensions, full-extension material support, and a Shop Nation dust collection setup that is a huge improvement over the stock dust collection on the Hercules miter saw.
The goal was to get the functionality of a large built-in miter station without permanently giving up an entire wall of the shop.
0:00 Why Build a Mobile Miter Saw Station? 0:41 Free Plans & Build Overview 1:37 Building the Main Cabinet 2:17 Installing the Casters 3:04 Building the Extension Wings 7:52 Building the Wing Support Arms 11:14 Installing the Slide Hardware 14:01 Adding Height Adjustment 15:02 Attaching the Fold-Up Wings 16:44 Laminate, T-Track & Measuring System 19:38 The Drawers 20:01 Fixing the Dust Collection 21:10 Final Reveal & Wrap-Up
A big thank you to Travis at Shop Nation for sending over the dust collection kit for the Harbor Freight Hercules HE74 miter saw used in this build. The kit made a huge improvement over the stock dust collection setup.
Shop Nation provided the dust collection kit used in this video.
Check out the HOKOLITE YZONI W5 WorkLight, its portability and focused bright light is perfect for lighting up what you are working on. - Shop on Amazon: amzn.to/4yy5ZPX - Official Website: hokolite.com
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #MiterSawStation #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #SmallShop #MakerMy Son Drew the Submarine Captain for Secret Santa... So I Made ThisThe Idea Garage2026-10-28 | Check out the HOKOLITE YZONI W5 WorkLight, its portability and focused bright light is perfect for lighting up what you are working on. - Shop on Amazon: amzn.to/4yy5ZPX - Official Website: hokolite.com
My son is deploying aboard the USS Delaware (SSN 791), and when the officers drew names for Secret Santa, the most junior officer onboard somehow ended up with the Commanding Officer.
Timestamps: 0:00 The Secret Santa Problem 0:10 Why Heβs Deploying on USS Delaware 1:02 A Problem With the Pen Blank 1:27 Turning Without a Pen Mandrel 2:00 Sanding & Polishing the Blank 2:19 Sponsored Segment: HokoLite W5 Work Light 3:25 Back to the build 4:55 Assembling the EDC Click Pen 5:58 Why a Navy CO Uses Blue Ink 6:35 The Blue Ink Problem 7:52 The Finished Pen
So... what do you get the captain of a nuclear submarine for Christmas? We decided on something he could actually use: a custom pen. In this video, I turn a custom label-cast blank featuring the USS Delaware's eagle mascot and βPeck 'Emβ design, pair it with a gun-metal EDC click pen kit, and make sure it's ready for the one detail that really matters for a Navy CO: blue ink.
Along the way, I nearly have a problem with the blank, use some homemade polishing compounds, improvise a pen press with an F-style clamp, and discover that the recommended blue ink refill doesn't quite work as planned.
The finished pen will be mailed to my son so he can give it to his Commanding Officer as his Secret Santa gift while they're deployed over the holidays.
Peck 'Em. To the Deep.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
Thanks for watching! #HOKOLITE #YZONI #WorkLight #HomeDIY #GarageTools #TheIdeaGarage #PenTurning #Woodturning #USNavy #USSDelaware #Woodworking #DIY #MakerHow an Amazon seller tried to hide my stolen design!The Idea Garage2026-10-25 | Update on my stolen 3D design!
Welcome back to The Idea Garage!
Here youβll find woodworking projects, workshop upgrades, DIY storage, 3D-printed shop tools, and practical home improvementsβall about solving problems and making your workspace more functional.
DISCLOSURE: Not every video includes sponsored content. Please assume links in this description are affiliate links, meaning I may earn a commission if you make a purchase, at no additional cost to you. If a sponsor provides a product featured in a video, Iβll disclose that in the video.
Thanks for watching and supporting The Idea Garage!
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerThey Stole My 3D Printed Tool. I Built It Better.The Idea Garage2026-10-21 | After my 3D-printed kerfmaker model was copied and sold on Amazon, I kept building. In this follow-up, I share the remade dado tool, an upgrade to my 3D-printed router circle jig, and a new clamping accessory for my doweling jig. Plus, thereβs an update on the Amazon listing and where things stand.
Timestamps: 0:00 My Stolen 3D Print: The Follow-Up 1:25 How Viewer Feedback Shaped These Upgrades 2:18 Adjustable Dado Setup Tool Redesign 4:27 Designing My Own Version 5:44 How to Use the Dado Setup Tool 9:33 Amazon Listing Update 10:28 Doweling Jig Clamping Upgrade 11:24 Router Circle Jig: No Center Hole 13:18 What I Learned from Sharing My Designs 14:00 Free 3D Print Files and Your Feedback
Welcome back to The Idea Garage!
Here youβll find woodworking projects, workshop upgrades, DIY storage, 3D-printed shop tools, and practical home improvements - all about solving problems and making your workspace more functional.
DISCLOSURE: Not every video includes sponsored content. Please assume links in this description are affiliate links, meaning I may earn a commission if you make a purchase, at no additional cost to you. If a sponsor provides a product featured in a video, Iβll disclose that in the video.
Thanks for watching and supporting The Idea Garage!
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerWhy AI woodworking plans fail in realityThe Idea Garage2026-10-16 | In this short I explain why I think the chair plans I used appear to be drawn by AI, and then how I intend to fix the problem. Check out the related video for the full build.
Welcome back to The Idea Garage!
Here youβll find woodworking projects, workshop upgrades, DIY storage, 3D-printed shop tools, and practical home improvementsβall about solving problems and making your workspace more functional.
DISCLOSURE: Not every video includes sponsored content. Please assume links in this description are affiliate links, meaning I may earn a commission if you make a purchase, at no additional cost to you. If a sponsor provides a product featured in a video, Iβll disclose that in the video.
Thanks for watching and supporting The Idea Garage!
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerIs free wood really worth building with?The Idea Garage2026-10-16 | In this short I ask if Spruce is a good enough wood for an outdoor chair.
Welcome back to The Idea Garage!
Here youβll find woodworking projects, workshop upgrades, DIY storage, 3D-printed shop tools, and practical home improvementsβall about solving problems and making your workspace more functional.
DISCLOSURE: Not every video includes sponsored content. Please assume links in this description are affiliate links, meaning I may earn a commission if you make a purchase, at no additional cost to you. If a sponsor provides a product featured in a video, Iβll disclose that in the video.
Thanks for watching and supporting The Idea Garage!
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerFree Wood, Bad Plans⦠Somehow I Built a ChairThe Idea Garage2026-10-14 | I built this DIY outdoor chair almost entirely from free reclaimed spruce lumber that was headed for the trash! In this build, I break down the oversized beams, mill them into usable lumber, shape and assemble the chair, and turn a pile of reclaimed wood into something useful for the backyard.
But this build didn't go exactly according to plan. Partway through the assembly, I discovered that the chair plans had a problemβthe angles on the seat assembly simply didn't work. Rather than scrap the project, I figured out what was wrong, modified the parts, and got everything fitting the way it should.
Timestamps: 00:00 Building an Outdoor Chair From Reclaimed Wood 00:36 Milling the Reclaimed Spruce 01:47 Building the Chair Legs 02:51 Making the Side Assemblies 04:03 Shaping the Armrests 04:53 Building the Seat & Back Assembly 06:11 Assembling the Chair 06:28 The Problem With the Plans 08:41 Fixing the Bad Angles 09:32 Armrests & Final Assembly 09:50 Making the Seat & Back Slats 10:38 Adding the Finishing Touches 10:52 The Finished Chair
I'm also using several tools and shop solutions I've built or designed here in The Idea Garage, including my 3D-printed doweling jig, 3D-printed featherboard, and lathe sanding table.
The first chair is now assembled, but there's still work to do! I'll be taking it back apart for final sanding, gluing the remaining joints, reassembly, and an outdoor finish to help protect that spruce.
Is spruce the perfect wood for outdoor furniture? Probably not. But free wood is the best wood!
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #DIYOutdoorFurniture #OutdoorChair #ReclaimedWood #DIY #WoodworkingProjects #GarageWorkshop #3DPrinting #MakerThis Tiny Dust Separator Surprised Me | Pemedor ReviewThe Idea Garage2026-10-07 | I tested the compact Pemedor dual-cyclone dust separator to see how much material it could keep out of my Ridgid shop vacuum.
Although it was much smaller than I expected, its separation performance during my controlled test was surprisingly good. In this review, I cover the setup, hose connections, stability, collection capacity, and the types of woodworking tools for which it may be best suited. Its small collection bin could fill quickly when connected to a planer, but it may be a practical option for sanding, a miter saw, or other tools that produce less material.
Timestamps: 0:00 Introduction 1:02 How Small Is It? 1:47 Assembly and Mounting Options 3:00 Hose Connections and Setup 3:43 Mobile Stability 4:57 Dust Separation Test 6:48 The Results 7:46 Best Uses and Limitations 9:17 Final Verdict
DISCLOSURE: This product was provided to me free of charge by the manufacturer for testing and review. The manufacturer did not pay for this video, influence the review, or have any control over what I said. All opinions and test results presented in this video are entirely my own.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #DustCollection #WorkshopSetup #ToolReviewI Finally Bought the Hercules Miter Saw... and Found a ProblemThe Idea Garage2026-09-30 | I finally added a miter saw to The Idea Garage! In this video, I'm putting the Hercules 12" Dual-Bevel Sliding Compound Miter Saw through its first real tests and sharing my initial impressions after getting it into the shop.
There is a lot I like about this saw, but it didn't take long to find a couple of things that surprised me. I test the accuracy, shadow cut line, trenching/depth-stop feature, cutting capacity, and dust collection. One of those features definitely didn't work the way I expected.
This isn't a long-term review. These are my first impressions after setting up the saw, making some cuts, and seeing what it can actually do. We'll find out over time whether the Hercules earns a permanent place in the shop.
Timestamps: 0:00 Why I Finally Bought a Miter Saw 1:30 Why I Chose the Hercules 2:13 Accuracy Out of the Box 2:33 Testing the Shadow Line 2:49 The Trenching Feature 3:38 Cutting Capacity 4:12 What I Like About the Saw 5:05 The Dust Collection Is Terrible 5:56 Hercules vs. DeWalt DWS780 6:52 What's Next for the Miter Saw
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
Thanks for watching! #TheIdeaGarage #Hercules #HerculesMiterSaw #MiterSaw #Woodworking #GarageWorkshop #ToolUpgrades #HarborFreight #DIYBookboard to Halloween Decor | Artilume U1 12W Laser #lasercuttingThe Idea Garage2026-09-27 | A sheet of bookboard becomes a layered Halloween pumpkin! Watch the Artilume U1 12W laser cut the pumpkin and spiderweb details, followed by removing the cutouts and a look at the finished painted piece.
My full Artilume U1 review is now live on The Idea Garageβcheck out the related video for the complete review.
#Artilume #LaserCutting #HalloweenDIYLive behind the scenes - Building miter station expanding wingsThe Idea Garage2026-09-27 | I spent some time working on my Miter Saw Extension wing while recording for the video as well.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerCan a 12W Laser Be Useful in a Woodshop? | Artilume U1 ReviewThe Idea Garage2026-09-26 | This video is sponsored by Artilume. The link below is an affiliate link, so I may earn a commission if you purchase through it at no extra cost to you.
Can a 12W laser be useful in a woodshop? I unbox and set up the Artilume U1, then test its engraving and cutting on projects for my shop, including my TIG logo and a layered pumpkin. I share the results and my honest experience using it.
0:00 Can a 12W laser work in my woodshop? 0:52 Unboxing and whatβs included 2:45 First engraving and phone app 4:14 How to focus the laser 5:00 Engraving and cutting my TIG logo 6:39 Bookboard cutting result 7:03 Testing plywood 7:43 Acrylic test and project results 8:55 Layered pumpkin project 9:09 What I think of the U1 so far 10:37 Phone, USB, and TF card connections 11:59 Final thoughts and recommendation
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #ArtilumeU1 #LaserEngraving #Woodworking #GarageWorkshop #MakerIt Took Me 26 Years of Marriage to Make This VideoThe Idea Garage2026-09-23 | This project is a little different from my usual builds. I made this handmade tea box for my wife using rainbow poplar that she picked out herself, including a bookmatched top to showcase all of the natural color in the wood.
But while I build it, I'm also telling a story I've never shared on the channel before: how we met, how things didn't exactly go according to plan, and how we ended up here 26 years later.
Sometimes the best projects aren't about what you're building. They're about who you're building them for.
0:00 Building a Tea Box for April 0:24 Why Rainbow Poplar? 1:15 How April and I Met 2:04 Building the Box 2:37 The Proposal... and Breakup 3:01 Separating the Lid 3:26 Finding Each Other Again 4:04 Getting Married in Vegas 4:35 Making the Tea Dividers 4:49 The Rainbow Poplar Comes Alive 5:06 Almost 28 Years Later 5:40 April Sees the Finished Box 6:15 Final Thoughts
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
Thanks for watching! #TheIdeaGarage #Woodworking #DIY #TeaBox #WoodworkingProjects #RainbowPoplar #GarageWorkshop3 Shop Tools I Want... But Which Comes First?The Idea Garage2026-09-16 | Iβve got plenty of tools Iβd LIKE to add to my workshop, but that doesnβt mean I need to buy them yet.
In this video, Iβm looking at my next shop tool upgrades and how I decide when a tool adds enough capability, convenience, or efficiency to justify the cost and space it takes up.
Iβll walk through some of the tools that have already earned their place in my shop, then look at three tools currently on my list: a miter saw, drill press, and oscillating spindle/belt sander. Iβve managed without all three so far, but with an upcoming project involving a LOT of repetitive crosscuts, one of them is quickly moving up the priority list.
What tool would YOU add next? Let me know in the comments.
Timestamps: 0:00 Why I Haven't Bought Every Tool 1:24 The Track Saw 2:19 The Table Saw 2:52 The Router Table 3:40 How I Prioritize New Tools 3:49 Why I Still Don't Own a Miter Saw 5:08 Why I'm Waiting on a Drill Press 6:07 The Dedicated Sander 6:59 Capability First, Convenience Later 7:38 How Do You Prioritize Tool Purchases?
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #ToolUpgrades #WorkshopTools #DIYThis 3D Printed Sanding Station Fixed My Workshop MessThe Idea Garage2026-09-12 | My sanding discs and random-orbit sander were constantly getting buried on my workbench, so I designed and 3D printed a compact sanding station to keep everything organized in one place.
This setup holds up to six stacks of 5-inch sanding discs on independently rotating holders and includes a dedicated dock for my Vevor 5-inch random-orbit sander. I mounted the system to the side of my cabinet, turning unused space into practical workshop storage.
In this video, I assemble the printed parts, install the 8 mm steel support rod, mount the organizer and sander dock, and load everything up for use. I also explain the design choices, a minor printing issue, and how the rotating holders work.
The 3D-printable files are available through my MakerWorld profile linked below.
TIMESTAMPS
00:00 Finished sanding station 00:17 The messy setup 00:45 Printing the parts 00:58 Assembly begins 04:05 Installing the organizer 05:04 Mounting the sander dock 06:03 Loading the sanding discs 06:35 Final result
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerLive! behind the scenes in The Idea GarageThe Idea Garage2026-09-10 | A little behind the scenes while i clean up, record some video for a future video
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #Maker5 Workshop 3D Prints That Are Actually Worth PrintingThe Idea Garage2026-09-09 | Looking for 3D prints that are actually useful in a woodworking shop? In this video, I'm sharing five 3D-printed shop tools and accessories that I've actually put to work in my own workshop, including a router circle jig, modular featherboard system, doweling jig, router table inserts, and one of my most-used table saw push blocks.
These aren't just prints that looked cool on the build plate. They're tools I've actually used to solve real problems in the shop. I'll show you how I use each one, what makes it useful, and why it has earned a place in my workshop.
I'm also sharing one 3D print that I thought would be incredibly useful when I printed it almost a year ago... but I've used it exactly ZERO times. Sometimes just because you can 3D print something doesn't mean it's worth printing!
Timestamps: 0:00 My Most-Used 3D Prints 1:25 #5 Router Table Insert Plates 2:52 #4 Palm Router Circle Jig 4:29 #3 Modular Featherboard System 5:40 #2 3D Printed Doweling Jig 7:06 #1 Adjustable Push Block 8:30 The 3D Print I Never Use 10:14 Final Thoughts
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
Thanks for watching! #TheIdeaGarage #3DPrinting #Woodworking #Workshop #3DPrintedToolsMilling out some recycled lumber!The Idea Garage2026-09-08 | Just thicknessing some wood after resawing it on the bandsaw.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerI Spent Nearly $1,000 Upgrading a Harbor Freight Dust Collectorβ¦Was It Worth It?The Idea Garage2026-09-05 | I took a basic Harbor Freight 2HP dust collector and transformed it into a wall-mounted hybrid two-stage dust collection system with a larger impeller, Super Dust Deputy cyclone, Wynn Environmental filter, 55-gallon collection drum, permanent ductwork, remote control, and custom 3D-printed blast gates and fittings.
This was not a cheap upgrade. By the time I added the cyclone, filter, piping, hoses, hardware, and printed parts, I had invested nearly $1,000 beyond the original cost of the dust collector. In this video, I walk through the build, explain how the finished system works, and break down where the money went.
TIMESTAMPS 00:00 Harbor Freight dust collector transformation 00:48 Finished system overview 01:18 Upgrading the impeller 01:39 Wall-mounting the blower 01:51 Building the Wynn filter plenum 02:07 Adding the curved internal deflector 02:22 Mounting and connecting the plenum 02:46 Modifying the Gamma Seal lid 03:05 Installing the fine-dust collection bucket 03:44 Mounting the Super Dust Deputy cyclone 05:20 Installing the cyclone brackets 05:40 Preparing the 55-gallon drum 05:50 Connecting the cyclone to the drum 06:21 Building custom 3D-printed blast gates 08:11 How the completed system works 09:33 Total cost and 3D-printing savings 11:20 Final thoughts
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #DustCollection #HarborFreight #Woodworking #GarageWorkshop #WorkshopSetup #ToolUpgrades #3DPrinting #DIY #ShopOrganizationWhere I Buy Lumber Besides Home Depot & LoweβsThe Idea Garage2026-09-02 | Where do you buy lumber besides Home Depot and Loweβs? In this video, Iβm sharing some of the unexpected places Iβve found affordable hardwood and plywood, including antique malls, Facebook Marketplace, and local building suppliers.
Iβll take you inside two antique malls here in North Alabama that have surprisingly large selections of hardwood lumber, show you how I search Facebook Marketplace for local lumber sources, and walk through how a simple Google search helped me find better-quality plywood for $56 a sheet instead of the $82 per sheet I was looking at from a big-box store. On five sheets, that saved me about $130.
Whether youβre looking for hardwood, plywood, rough-cut lumber, or just trying to save some money on your next woodworking project, it pays to look beyond the big-box stores.
Timestamps: 00:00 Finding Lumber Beyond the Big Box Stores 00:56 Hardwood at Candlelight Antiques 02:31 Another Antique Mall Lumber Source 03:22 Finding Local Lumber on Facebook Marketplace 04:19 The $82 Plywood Problem 04:58 Searching for a Better Plywood Source 05:40 Saving Money Without Sacrificing Quality 06:28 Final Thoughts
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #Lumber #Hardwood #DIYI 3D Printed a $250 Doweling JigThe Idea Garage2026-08-31 | I wanted the capability of a $250 doweling jig without spending $250, so I designed and 3D printed my own! It uses stainless-steel drill bushings and adjustable spacers for accurate, repeatable dowel joints. Watch the full build and grab the FREE 3D print files through the linked video! #Woodworking #3DPrinting #DowelingJig #DIY #TheIdeaGarageDIY Doweling Jig for Woodworking... 3D Printed and Surprisingly AccurateThe Idea Garage2026-08-29 | Think a premium doweling jig has to cost $250? I wasn't convinced. In this video, I show how I designed and built a precision 3D printed doweling jig inspired by one of the most popular machined aluminum jigs on the market. After designing, printing, and assembling the jig, I put it to the test to see if it can produce accurate, repeatable dowel joints without the premium price tag. I'll walk you through the design, the hardware, the assembly, and then demonstrate it in use so you can decide whether a 3D printed version is worth adding to your own workshop. If you'd like to build one yourself, the printable files are available on MakerWorld.
Timestamps 00:00 Preview 00:20 Why I Built It 02:42 Assembly 06:09 Finished Jig Overview 07:08 How It Works 10:41 More Ways to Use It 12:57 Final Thoughts
Welcome back to The Idea Garage! The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace. π΄ SUBSCRIBE FOR NEW VIDEOS: youtube.com/@TheIdeaGarage1?sub_confirmation=1 π¬ BUSINESS INQUIRIES: TheIdeaGarage1@gmail.com π MY 3D PRINTING FILES: makerworld.com/en/@robert.darrell.?ref=youtube Thanks for watching! #TheIdeaGarage #Woodworking #DowelingJig #Doweling #DIY #3DPrinting #MakerWorld #WoodworkingJigs #WorkshopProjects #ShopMadeToolsShop Cleanup & Sea StoriesThe Idea Garage2026-08-25 | Come hang out with me while I tackle some much-needed cleanup in The Idea Garage! While I work, Iβll be sharing a few sea stories from my 26 years in the Navy, answering questions, and chatting with you guys along the way.
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerI Built a Cedar Greenhouse in My Backyard!The Idea Garage2026-08-24 | After weeks of work, my cedar greenhouse is finally finished. Check out the related video for the full walkthrough, features, and final thoughts on the build.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerDIY 3D Printed Featherboard System for the Table SawThe Idea Garage2026-08-23 | I got tired of cheap featherboards, so I designed and 3D printed my own adjustable featherboard system for the table saw. In this Short, you'll see how it works in action. If you'd like to build one yourself, the free 3D printing files are available on my MakerWorld page, and the full build video is available on my YouTube channel.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
Thanks for watching! #TheIdeaGarage #Woodworking #3DPrinting #TableSaw #Featherboard #DIY #MakerWorld #Workshop #ShopJigs #WoodworkingJigsBuilding the Bellerose XL Greenhouse | Final Walkthrough & First ImpressionsThe Idea Garage2026-08-22 | The Backyard Discovery Bellerose XL Greenhouse is finally complete!
In the third and final video of this greenhouse build series, Iβm giving you a full walkthrough of the finished structure, sharing my first impressions, and discussing what it took to go from preparing and pouring the concrete perimeter foundation to assembling the completed cedar greenhouse.
Iβll show you the interior shelving, ventilation features, four-wall polycarbonate panels, electrical setup, seasonal water connection, and the pergola area at the front. Iβll also talk about how we plan to use the greenhouse as a seed-starting and growing station with shelving and grow lights, along with our plans to protect our citrus trees during the winter using an electric heater.
There are still several future upgrades planned. These include additional organization inside the greenhouse, irrigation controllers for future fruit trees, and expanded irrigation for the additional raised beds we plan to install.
00:00 Introduction 00:54 Greenhouse Specifications & Dimensions 02:21 Foundation Options & Why I Chose Concrete 04:14 Four-Wall Polycarbonate Panels 05:22 Planned Uses: Seed Starting & Citrus Trees 06:22 Ventilation & Exhaust Fan 07:20 Interior Space & Layout 08:16 Shelving, Hooks & Included Features 09:29 Power Port & Permanent Electrical Installation 11:03 3D Printed Conduit Plate 12:57 Factory Water System & My Modifications 14:40 How We'll Use the Greenhouse Year-Round 16:14 First Impressions 17:03 Build Difficulty & Assembly Experience 18:35 Favorite Features 19:49 What I Still Need to Test 20:22 Final Thoughts 22:07 Greenhouse Series Wrap-Up 23:00 Thanks for Watching
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #BelleroseXL #BackyardDiscovery #GreenhouseBuild #GreenhouseTour #DIYGreenhouse #BackyardGreenhouse #Gardening #HomeImprovement #DIYWe Built This Greenhouse from 10 BoxesThe Idea Garage2026-08-19 | We turned 10 boxes of parts into a complete backyard greenhouse! Hereβs a quick look at the structure coming together from the foundation and framing to the wall panels, roof, and finished build.
Watch the related video for the complete greenhouse build.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Greenhouse #DIYGreenhouse #DIY #HomeImprovement #Woodworking #GarageWorkshop #WorkshopSetup #MakerBuilding the Bellerose XL Greenhouse | Assembling the StructureThe Idea Garage2026-08-15 | Weβre continuing the Backyard Discovery Bellerose XL Greenhouse build!
In this second video, I organize the kit, protect the cedar with a clear outdoor finish, assemble the wall framing, install the polycarbonate panels and interior tables, build the roof, and add the front pergola. Along the way, I share a few challenges, mistakes, and tips that may help anyone assembling this greenhouse.
β±οΈ CHAPTERS
00:00 Introduction 00:47 Organizing the Wood Components 01:03 Sorting and Preparing the Hardware 03:50 Applying a Clear Outdoor Wood Finish 04:20 Building the Back Wall 05:00 Assembling the Side Walls 05:55 Installing the Front Wall 06:14 Day Two: Installing the Lower Wall Panels 06:57 Electrical and Water Access Panels 07:54 Installing Window Sills and Channels 08:39 First Polycarbonate Wall Panel 09:14 Building the Interior Slat Wall and Shelf 09:49 Installing the Greenhouse Tables 11:56 Hanging the Operable Windows 12:24 Assembling the Roof Gable Ends 12:51 Installing the Gable in the Rain 13:10 Adding the Automatic Fan 13:47 Lifting the Roof Sections Into Place 14:15 Securing the Ridge Beam and Rafters 15:08 Installing Soffits and Fascia 15:30 Collar Ties and Roof Channels 16:03 Installing the Roof Polycarbonate Panels 16:30 Flashing and Roof Trim 17:41 Assembling the Front Pergola 18:12 Lifting and Installing the Pergola 19:16 Finished Greenhouse Structure
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#BelleroseXL #GreenhouseBuild #BackyardDiscovery #DIYGreenhouse #GreenhouseAssembly #PolycarbonateGreenhouse #PergolaBuild #HomeImprovement #TheIdeaGarage #DIYThis Greenhouse Started With THIS...The Idea Garage2026-08-11 | Before I could build my new greenhouse, I needed a solid foundation that wasnβt going anywhere.
Watch the full greenhouse foundation build using the related video linked to this Short!
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#Greenhouse #GreenhouseBuild #GreenhouseFoundation #DIY #HomeImprovement #TheIdeaGarageBuilding the Bellerose XL Greenhouse | Foundation Prep & Concrete PourThe Idea Garage2026-08-08 | Weβre officially starting our Backyard Discovery Bellerose XL Greenhouse build!
In this first episode, I prepare the site, install the weed barrier and gravel base, build the forms, and pour the concrete perimeter that will support the greenhouse. This was my first concrete project of this size, and my sonβs help made all the difference.
Follow along as we turn this empty spot in our backyard into a finished and functional greenhouse.
β±οΈ CHAPTERS
00:00 Introducing the Bellerose XL Greenhouse 01:35 Installing the Weed Barrier 02:45 Checking and Squaring the Forms 03:20 Building the Interior Forms 04:22 Fighting Warped Form Boards 04:52 Filling the Foundation with Gravel 05:25 Building a Gravel Ramp 05:58 Mixing and Pouring Concrete 06:33 The Finished Greenhouse Foundation 07:08 Whatβs Coming Next
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#BelleroseXL #GreenhouseBuild #GreenhouseFoundation #BackyardDiscovery #DIYGreenhouse #ConcretePour #HomeImprovement #TheIdeaGarageShe Bought Marble Bowlsβ¦ So I Turned Custom Cherry LidsThe Idea Garage2026-08-01 | In this video, Iβm turning custom cherry wood lids on the lathe for a set of marble bowls my wife picked up. This was a simple but really satisfying woodturning project that focused on getting a clean fit, shaping the lids, adding small knobs, and bringing out that beautiful cherry grain with a smooth finish.
Sometimes the best shop projects are the small problem-solving ones β and these marble bowls look a whole lot better with handmade wooden lids.
TIMESTAMPS: 0:00 - Project Backstory 1:41 - Measuring the Bowls 2:03 - Cutting the Blanks 3:55 - Mounting the Wood 5:49 - Turning the Tenon 7:52 - First Fit Check 9:46 - Swapping Chuck Jaws 10:21 - Shaping the Lid 12:29 - Turning the Handle 13:47 - Sanding & Abrasive Pastes 16:08 - Food-Safe Finishing 16:49 - The Final Reveal
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#Woodturning #CherryWood #Woodworking #LatheProject #CustomLids #MarbleBowls #TheIdeaGarage #GarageWorkshop #DIY #MakerThe Idea Garage LIVE. Recent Projects, Whatβs Coming Next & Shop TalkThe Idea Garage2026-07-31 | Join me live from The Idea Garage for a casual evening of shop talk!
Iβll be talking about the projects youβve recently seen on the channel, the videos I already have completed and waiting to publish, and the projects Iβm currently considering for future videos.
Weβll discuss the recently published bandsaw video, the upcoming cherry bowl-lid project, the three-part greenhouse build series, and some future ideasβincluding a dust collection upgrade, a tea box build, and whatever else comes up during the conversation.
This will be a relaxed, free-flowing live, so bring your questions, tell me what youβre working on, and join the conversation about woodworking, tools, 3D printing, DIY projects, shop upgrades, and more.
#TheIdeaGarage #WorkshopLive #Woodworking #DIY #ShopTalk #3DPrinting #GreenhouseBuildRelaxing Rain and Thunder sounds from our new GreenhouseThe Idea Garage2026-07-29 | This video is only the sound of rain and thunder, perfect to listen to while relaxing.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerThe Idea Garage Live StreamThe Idea Garage2026-07-27 | [ADD A SHORT VIDEO-SPECIFIC DESCRIPTION HERE]
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerSetting Up My New Grizzly G0513Z Bandsaw β Assembly & AlignmentThe Idea Garage2026-07-25 | In this video, Iβm assembling and dialing in my new Grizzly G0513Z 17" bandsaw for the shop. This bandsaw is going to be a big upgrade for future woodworking projects, woodturning blanks, resawing, cutting bowl blanks, and general shop work.
I walk through the basic assembly, getting the saw set up in the workshop, installing and adjusting the table, checking alignment, and making sure everything is ready before putting it to work. This isnβt a full professional machinery setup guide β itβs a practical look at what the process was like getting the G0513Z assembled and aligned in a real garage workshop.
If youβre considering the Grizzly G0513Z bandsaw, setting up a garage woodshop, or adding a larger bandsaw to your tool lineup, hopefully this gives you a good look at what to expect.
β±οΈ TIMESTAMPS: 0:00 β Intro & Project Overview 0:21 β Unboxing & Cleaning the Cosmoline 1:30 β Installing the Guidepost Hand Wheel & Stop Bolt 2:32 β Removing the Factory Blade 4:11 β Cleaning and Prepping the Cast Iron Table 5:26 β Mounting the Table to the Trunion 6:59 β Installing the Rear and Front Rails 8:16 β Assembling the Fence & Resaw Accessories 11:02 β Installing the Dust Deflector & Blade Guard 12:01 β Dust Collection Plans 13:03 β Installing and Adjusting the Lower Blade Guides 15:21 β Adjusting the Upper Blade Guides & Bearing 17:20 β Hand-Testing the Blade Tracking 17:55 β First Test Cut 18:37 β Future Blade Plans & Outro
βοΈ ABOUT THE IDEA GARAGE: The Idea Garage focuses on woodworking, garage workshop setup, DIY storage builds, tool upgrades, 3D-printed shop solutions, and practical home improvements. From custom router tables to shop organization and problem-solving builds, every project aims to create a more functional and efficient workspace.
#GrizzlyG0513Z #BandsawSetup #WoodworkingTools #GarageWorkshop #WorkshopSetup #Bandsaw #GrizzlyBandsaw #Woodworking #ToolSetup #ShopUpgrade #TheIdeaGarageRain from inside the greenhouse ASMRThe Idea Garage2026-07-25 | I was recording the 3rd episode of our Greenhouse series that is coming soon and it started to rain. The sounds of the rain and thunder is so calming. Subscribe to see the full build series of the greenhouse and more!
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerMy Garage Workshop Needed More PowerThe Idea Garage2026-07-18 | In this video, I upgrade the electrical system in my garage workshop by adding a 50A subpanel to support new dedicated circuits for my tools and future shop expansion.
I walk through the project, including the new subpanel, 20A workshop outlet circuits, a 240V bandsaw circuit, and the wiring route for future greenhouse power. This upgrade gives The Idea Garage cleaner, safer, and more flexible power for woodworking, tool upgrades, and future projects.
β±οΈ Chapters: 00:00 Intro 01:26 Feeding the New Subpanel 02:14 Safety Disclaimer 02:42 Subpanel and Circuit Overview 03:27 Two Circuits in Each Outlet Box 03:56 Wiring the 120V Outlets 04:28 Wiring the 240V Bandsaw Outlet 06:08 Outlet Orientation 07:00 Finished Electrical Upgrade
β οΈ Electrical work can be dangerous. Always follow local code, use proper permits when required, and hire a licensed electrician if you are not comfortable doing this type of work.
βοΈ ABOUT THE IDEA GARAGE: The Idea Garage focuses on woodworking, garage workshop setup, DIY storage builds, tool upgrades, 3D-printed shop solutions, and practical home improvements. From custom router tables to shop organization and problem-solving builds, every project aims to create a more functional and efficient workspace.
#WorkshopElectrical #Subpanel #GarageWorkshop #WorkshopUpgrade #WoodworkingShop #DIYElectrical #TheIdeaGarage #WorkshopBuild #GarageShop #WoodworkingI Sold Everything and Rebuilt My Shop From ScratchThe Idea Garage2026-07-11 | One year ago, I sold most of my belongings, moved across the country, and started rebuilding my shop from the ground up.
In this 1 year shop update, Iβm walking through how my garage workshop has changed, what I added first, what projects and problems pushed those upgrades, and how Iβm trying to build this shop intentionally instead of just buying tools for the sake of buying tools.
A lot of the decisions in this shop are based on lessons learned from my previous workshop β what I actually used, what I did not miss, and what made the biggest difference in day-to-day woodworking. Iβll also talk about the shop improvements Iβve made so far, the storage and workflow problems Iβm still solving, and the future upgrades Iβm planning as this workshop continues to grow.
If you are building a garage workshop, starting over, working with limited space, or trying to decide which tools and upgrades matter most, hopefully this gives you some ideas.
β±οΈ TIMESTAMPS: 0:00 β Leaving California & Moving to Alabama 1:16 β Starting Over: My New Shop Requirements 2:05 β Turning a Blank Garage into a Workshop 3:49 β 3D Printing & First Projects (The Mural Drawers) 6:13 β First Major Tool Purchases: Track Saw & SawStop 8:03 β The Laundry Room Project & Router Table Build 9:09 β Getting Hooked on the Lathe & Lathe Storage 10:25 β Solving the Outfeed Problem: Mobile Assembly Table 12:06 β Future Upgrades: Dust Collection & 220V Electrical 13:41 β Next Project Teaser: The Greenhouse Kit 13:57 β Moving Timeline Recap & One-Year Reflection
βοΈ ABOUT THE IDEA GARAGE: The Idea Garage focuses on woodworking, garage workshop setup, DIY storage builds, tool upgrades, 3D-printed shop solutions, and practical home improvements. From custom router tables to shop organization and problem-solving builds, every project aims to create a more functional and efficient workspace.
#ShopUpdate #GarageWorkshop #WoodworkingShop #WorkshopBuild #GarageShop #ShopOrganization #ToolUpgrades #DIYWorkshop #Woodworking #TheIdeaGarage #3DPrintingShop #WorkshopTour #RetirementWorkshopFinished Table Outfeed Assembly and Planer standThe Idea Garage2026-07-08 | This multifunction table fills 3 roles for me. Check out the full build on my channel!
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerMy planer is going under the outfeed tableThe Idea Garage2026-07-07 | All shop decisions will have some bit of compromise. My planer will be under my table, but it's better than the previous location! Check out the full build video.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerNo Domino Joiner? Glue and clamp it anywaysThe Idea Garage2026-07-07 | Here I glue up a large panel the best way I can with the tools I have... while also thinking about the future of tool development. Watch the full build video on my channel.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerGenius Hack for aligning retractable castersThe Idea Garage2026-07-06 | This is a portion of my full video where I build a multi-function table in my garage shop. I show how I use a template to mark out where the retractable casters will get mounted.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerIm tired of moving my planer every time I need to use itThe Idea Garage2026-07-06 | This short shows my problem! Watch the full video to see how I fix it.
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerThis Multifunction Mobile Workstation Solves Small Shop Problems.The Idea Garage2026-07-04 | Stop wasting precious shop space on dedicated tables! In this video, Iβll show you step-by-step how I built my multi-functional workshop assembly table. Designed from a smart, partial-plywood sheet framework and topped with a solid butcher block top, this heavy-duty shop cart completely solves the small shop space problem.
It serves as a perfect table saw outfeed table, doubles as a rock-solid wood assembly table, and features a custom hidden shelf underneath to store a heavy DeWalt planer out of the way when not in use. Plus, I engineered it with retractable casters for total mobility and heavy-duty leveling feet so it stays dead-level on an uneven garage floor.
Whether youβre looking for smart garage workshop storage ideas or a versatile mobile workbench build, this DIY woodworking project is a game-changer!
β±οΈ TIMESTAMPS: 0:00 - The Small Shop Space & Planer Problem 1:19 - Project Overview & Reusing Laundry Room Butcher Block 2:35 - Cutting the Framework & Designing the Height 3:29 - Gluing Up the Benchtop 4:46 - Assembling the Base & Plywood L-Frame Legs 6:21 - Drilling and Prepping for Leveling Feet 7:49 - Setting the Stretchers & Lower Shelf Height 9:11 - Attaching the Butcher Block & First Outfeed Test 9:48 - Installing the Retractable Casters Using a Custom Template 11:01 - Dialing It In: Leveling on a Sloped Floor & Future Shop Upgrades
ABOUT THE IDEA GARAGE: The Idea Garage focuses on woodworking, garage workshop setup, DIY storage builds, tool upgrades, 3D-printed shop solutions, and practical home improvements. From custom router tables to shop organization and problem-solving builds, every project aims to create a more functional and efficient workspace.
π¬ BUSINESS INQUIRIES: TheIdeaGarage1@gmail.com π MY 3D PRINTING FILES: makerworld.com/en/@robert.darrell.?ref=youtubeMounting the Wheels to the Steady RestThe Idea Garage2026-07-02 | In this video I add skate wheels to aluminum track to use on my lathe steady rest. Check out the long form video for more!
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #MakerWhen You Glue Before You ThinkThe Idea Garage2026-07-01 | In this video I glued my blanks together before I cut my circles. Watch the full video of the build on my channel!
Welcome back to The Idea Garage!
The Idea Garage focuses on woodworking, garage workshop setup, tool upgrades, DIY storage builds, 3D-printed shop solutions, practical home improvements, and problem-solving projects for a more functional workspace.
#TheIdeaGarage #Woodworking #GarageWorkshop #DIY #WorkshopSetup #ToolUpgrades #ShopOrganization #3DPrinting #HomeImprovement #Maker3D Printing Custom Lathe Parts!The Idea Garage2026-06-30 | βοΈ ABOUT THE IDEA GARAGE: The Idea Garage focuses on woodworking, garage workshop setup, DIY storage builds, tool upgrades, 3D-printed shop solutions, and practical home improvements. From custom router tables to shop organization and problem-solving builds, every project aims to create a more functional and efficient workspace.
π¬ BUSINESS INQUIRIES: TheIdeaGarage1@gmail.com π MY 3D PRINTING FILES: makerworld.com/en/@robert.darrell.?ref=youtube #lathe #3Dprinting #3dprinted #ShopOrganization #LatheToolStorage #DIYStorage #TheIdeaGarage #Woodworking #WorkshopBuild #3DPrintingShopWhy Your Lathe Needs a Steady RestThe Idea Garage2026-06-29 | βοΈ ABOUT THE IDEA GARAGE: The Idea Garage focuses on woodworking, garage workshop setup, DIY storage builds, tool upgrades, 3D-printed shop solutions, and practical home improvements. From custom router tables to shop organization and problem-solving builds, every project aims to create a more functional and efficient workspace.