Ortur LASER Master 2 PRO Enclosure - Step by Step Guide Dark Art Guitars 2024-10-16 | Ortur LASER Master 2 PRO Enclosure - Step by Step Guide
Satisfying Build Montage - Custom DARK ART GUITARS Alchemist Guitar Dark Art Guitars 2024-03-04 | Another Alchemist build is complete! This one takes a lot of inspiration from my original Alchemist build but takes it to a whole other level. I am very happy with how it turned out and almost sad that it is leaving my workshop for a new home.Want to order your own custom Dark Art Guitars build? Reach out to me at guitar@darkartguitars.comMusic: "Apex" and "Tension" by Alexander Nakarada (www.creatorchords.com)Licensed under Creative Commons BY Attribution 4.0 Licensecreativecommons.org/licenses/by/4.0Support me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------
Complete Ice Kraken Guitar Build in 10 Minutes Dark Art Guitars 2024-02-21 | Over the last couple of months, I build this custom 8-string guitar for @JacksonGrim. Featuring an alder body, EMG X pickups, custom glow-in-the-dark inlay, and much more this is a real ripper!Detailed Specs and Pictures: darkartguitars.com/ice-kraken-alchemist-3Music by Jackson Grim, check him out here: open.spotify.com/artist/1qH02FBujZWPWzTFXAQVKZ?si=7FDuUQKzSmymrCdDbAZ6Sgtiktok.com/@jacksongrimmx/video/7017447738853887237?_r=1&_t=8k1AvHWCHjSSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------
Effective CNC Dust Collection - A Prototyping Journey Dark Art Guitars 2024-02-12 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302Proper dust extraction for my Killerbee CNC has been on the project list since I built the machine. My first attempt did not work and then I forgot about the issue for a few years thanks to the enclosure. But now that I have a full dust extraction system in my workshop it was only right to also include the CNC. In this video, I show you my journey of how I arrived at my final design.75mm Flexible Hose I used: https://s.click.aliexpress.com/e/_DFnrflXMagnets: https://s.click.aliexpress.com/e/_DFgVwANMy Fusion360 design: thingiverse.com/thing:6481555Support me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------00:00 Intro00:50 PCBWay01:23 Comparing Options05:35 My Dust Collection System07:16 Hose Routing09:20 Dust Shoe Prototyping13:27 Final Design18:00 Testing20:45 Evaluating Results22:50 Outro
NEW 2024 Workshop TOUR - From Datulab Tech to Dark Art Guitars Dark Art Guitars 2024-01-29 | Welcome to Dark Art Guitars! Formerly called Datulab Tech I have found a new passion in building guitars and I want to share that with you. In this video, I show you my workshop transformation and discuss this channel's future. Want to see more of my guitars?Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comMy random orbital sander: https://s.click.aliexpress.com/e/_DdKwt3jSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------00:00 Intro02:24 Workbench Build05:09 Workshop Tour17:53 Asking for Feedback
How I built my CYBERPUNK GUITAR #2 - Dark Art Guitars #ggbo2023 Dark Art Guitars 2023-12-15 | I'm honored to participate in this year's GGBO2023 competition organized by Crimson Guitars. This video details the second part of building my cyberpunk-inspired guitar, which I call CP-01. This time I fix all the mistakes from last time and make some new ones. Hope you enjoy!Follow the progress on Instagram: instagram.com/darkartguitarsInterested in a custom guitar build for yourself? Get in touch on Instagram or shoot me an email at guitar@darkartguitars.com and I'll gladly build you one!Support me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------
DIY Cyberpunk Guitar Pickups - CP-01 #ggbo2023 Dark Art Guitars 2023-12-06 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302I knew this guitar needed custom pickups and they had to be something special. So what better time to try out the super clear 3d printing services from PCBWay for some epic pickup bobbins. Not only do they look absolutely unique, they also end up sounding quite well.Support me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------
Crazy CYBERPUNK GUITAR - Complete Build and Demo - Dark Art Guitars #ggbo2023 Dark Art Guitars 2023-11-28 | My guitar CP-01 is complete! Just in time for the ggbo2023 deadline, I managed to tie everything up. This was quite the endeavor with many ups and downs, but here you get to see 6 months of work in just a few minutes. If you would like more details, check out my longer multi-part series on this build: youtube.com/playlist?list=PLzcD3pbxIKwL2_xA3wnKNfWIKBnGB4LKLDo you love this guitar and want something similar yourself? You're in luck as I do build custom guitars on order. Just shoot me an email at guitar@darkartguitars.com or DM me on Instagram @darkartguitarsDemo riffs (please excuse my sloppy playing of them): A Change Of Seasons by Dream TheaterThe Heart Collector by NevermoreBackground Music: "Catalyst" and "Pseudo" by Alexander Nakarada (www.creatorchords.com)Licensed under Creative Commons BY Attribution 4.0 Licensecreativecommons.org/licenses/by/4.0Support me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------00:00 Build Montage05:48 Final Result07:25 Demo
Crazy Cyberpunk Guitar Build Part 1 - Dark Art Guitars #ggbo2023 Dark Art Guitars 2023-10-20 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302I'm honored to participate in this year's GGBO2023 competition organized by Crimson Guitars. This video details the first part of building my cyberpunk-inspired guitar, which I call CP-01. This build has many ups and downs, but that's when you learn the most. Hope you enjoy!Follow the progress on Instagram: instagram.com/darkartguitarsInterested in a custom guitar build for yourself? Get in touch on Instagram or shoot me an email at guitar@darkartguitars.com and I'll gladly build you one!Support me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------#ggbo2023 #greatguitarbuildoff2023 #ggbo23 #ggbo23scratch
Masso G3 Touch - An in-depth Review Dark Art Guitars 2023-09-28 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302In this video, I go in-depth about my most recent upgrade to my RatRig Killerbee CNC, the Masso G3 Touch. I like many things about it but also plenty of quirks to be aware of. This video should give you an overview of whether this controller is something for you or not.Watch me build guitars using it: instagram.com/darkartguitarsMasso website (no affiliation): https://www.masso.com.auSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------00:00 Intro00:48 Why Masso05:16 Overview and Installation13:30 Going in-depth27:00 Bonus CNC Tips
Dark Art Guitars Alchemist Build - 1 Month of Work in 15min Dark Art Guitars 2023-06-02 | Build montage of my most recent guitar, called Alchemist. If you want me to build you a similar guitar, reach out on Instagram (@darkartguitars) or email (guitar@darkartguitars.com).Follow me on Instagram: instagram.com/darkartguitarsSpecs:Padauk body (natural color, Crimson Guitars High Build Guitar Oil finish)Wenge/Maple/Padauk neckEbony fretboardFishman Fluence Tosin Abasi pickupsNova guitar parts headless tremolo bridgeStainless steel fretsBrass/Aluminum InlayMusic: Pseudo by Alexander Nakarada (www.creatorchords.com)Licensed under Creative Commons BY Attribution 4.0 Licensecreativecommons.org/licenses/by/4.0Support me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------
DIY PCB Guitar Pickups - Will they work? Dark Art Guitars 2023-05-27 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302Would it be possible to build your own PCB guitar pickups as Fishman does with their Fluence line? Well, that's what I was wondering too so I built some. In this video, I show you how I did it and whether they sound any good.Video by Dylan Talks Tone: youtube.com/watch?v=9Uih75f4now&t=471sSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------
Building a Headless Guitar using Fusion360 and Hobby CNC - Dark Art Guitars The Watcher Dark Art Guitars 2023-03-31 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302I have finally gotten around to building my first guitar from scratch. I designed everything in Fusion 360 and used my RatRig Killerbee to cut out the rough shape. What followed were weeks of sanding and finishing to get to the final result. In this video, I got much more into detail on the designing aspect and the CAM as well.Build Montage and Demo: youtu.be/i0Oi17zD_r0Best YT channel for Fusion360 guitar building: @austinshaner youtube.com/playlist?list=PL6PhF5oGQvMZp-4LqpHxdTgLbw-yuMHj8Specs of the guitar:Headless bridge (it's a cheaper option to main brand, but you'll have to replace part of the included hardware like getting steel set screws instead of the brass ones): https://s.click.aliexpress.com/e/_DFNHDhnPickup: Seymour Duncan Distortion (I believe, or some other SD, I had it for a while and forgot which one it is)All wood and most components from: guitarsandwoods.comBody: European Ash with Eucalyptus VeneerNeck: WengeFretboard: EbonyScale: 25" to 25.5"Frets: Medium Jumbo Stainless Steel (I'll definitely get Jumbo next time, not a fan of these)Nut: CarbonFinish: Crimson Guitars High Build Guitar Oil (over stain from the hardware store)Strings & Tuning: Ernie Ball 10-48, C-StandardSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------Timestamps:00:00 Intro01:12 Design Overview07:29 Headless Hardware09:59 Scalloped Fretts10:40 Body CAM16:53 Neck CAM18:47 Fretboard CAM22:50 Electronics Cover CAM24:21 Assembly and Finish26:50 Outro
Dark Art Guitars The Watcher Headless Guitar Build feat. RatRig Killerbee CNC Dark Art Guitars 2023-03-26 | I have finally gotten around to building my first guitar from scratch. I designed everything in Fusion 360 and used my RatRig Killerbee to cut out the rough shape. What followed were weeks of sanding and finishing to get to the final result.Want me to build you one, reach out to me on Instagram @darkartguitars or guitar@darkartguitars.comWant a longer version with commentary? Check it out here: youtu.be/L_yz1x9mZ9wSpecs of the guitar:Headless bridge (it's a cheaper option to main brand, but you'll have to replace part of the included hardware like getting steel set screws instead of the brass ones): https://s.click.aliexpress.com/e/_DFNHDhnPickup: Seymour Duncan Distortion (I believe, or some other SD, I had it for a while and forgot which one it is)All wood and most components from: guitarsandwoods.comBody: European Ash with Eucalyptus VeneerNeck: WengeFretboard: EbonyScale: 25" to 25.5"Frets: Medium Jumbo Stainless Steel (I'll definitely get Jumbo next time, not a fan of these)Nut: CarbonFinish: Crimson Guitars High Build Guitar Oil (over stain from the hardware store)Strings & Tuning: Ernie Ball 10-48, C-StandardAmpsim: NeuralDSP Archetype NollyMusic: Circuits by Alexander Nakarada (www.serpentsoundstudios.com)Licensed under Creative Commons BY Attribution 4.0 Licensecreativecommons.org/licenses/by/4.0Support me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------
Hunting Backlash Gremlins - BF30 CNC Conversion #12 Dark Art Guitars 2023-03-03 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302Backlash is the bane of every CNC conversion. There is always some and it's always too much. In this video, I investigate various sources and make some much-needed improvements to my design.The BK15 C5 bearing blocks I bought: ebay.us/bKiEMfShim stock used: https://s.click.aliexpress.com/e/_DdIMCvJMusic by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------
RatRig V-Core 3.1 Review Dark Art Guitars 2022-10-13 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302I was looking for the ultimate 3d printer to build, so when RatRig agreed to provide the mechanical parts for this build I knew I had to do it. In this video, I go over all the different aspects of this machine and tell you what I like and what I don't.Big thanks to everyone who has provided parts for this build:Get 20 Euro off your Vcore3.1 with code: V31DATULABRatRig (V-Core 3.1 400mm mechanical kit): ratrig.com/3d-printing-cnc/3d-printer-kits/all-3d-printer-kits/v-core-3/v-core3configurable.htmlSlice Engineering (Mosquito Magnum): sliceengineering.com/collections/all-products-collection/products/mosquito-magnum-hotendBigtreetech (Octopus Pro): https://biqu.equipment/products/bigtreetech-octopus-pro-v1-0-chip-f446?variant=39482177257570Banggood (LDO Orbiter V2.0): banggood.com/custlink/GGDCWrnpGPWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------00:00 Intro00:28 PCBWay01:04 Overview03:00 Hardware06:37 Features08:46 Electronics09:58 Panels11:33 Assembly13:38 Print Results17:14 Conclusion19:28 Outro
RatRig V-Core 3.1 - Time-lapse Build Dark Art Guitars 2022-09-16 | I was looking for the ultimate 3d printer to build, so when RatRig agreed to provide the mechanical parts for this build I knew I had to do it. In this video, I assemble the printer and get everything up and running. There will be a much more detailed review video where I explain all the options I chose and what I think of the machine. For now, enjoy a few days of work in just 5min.Big thanks to everyone who has provided parts for this build:RatRig (V-Core 3.1 400mm mechanical kit): ratrig.com/3d-printing-cnc/3d-printer-kits/all-3d-printer-kits/v-core-3/v-core3configurable.htmlSlice Engineering (Mosquito Magnum): sliceengineering.com/collections/all-products-collection/products/mosquito-magnum-hotendBigtreetech (Octopus Pro): https://biqu.equipment/products/bigtreetech-octopus-pro-v1-0-chip-f446?variant=39482177257570Banggood (LDO Orbiter V2.0): banggood.com/custlink/GGDCWrnpGPMusic by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------
DIY Keyboard Ep.4 - Software Dark Art Guitars 2022-07-15 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302If you always wanted to build your own keyboard but didn't know where to begin, this series is for you. In this video, I go over the different options you have to get your keyboard talking to the computer. I show both how you can code a simple firmware yourself, as well as how to configure QMK to do the heavy lifting for you.PCBWay 8th-anniversary sale: pcbway.com/activity/anniversary8sales.htmlProject on PCBWay: pcbway.com/project/shareproject/12_Key_Macro_Keyboard_42e06343.htmlAll the files on GitHub: github.com/datulab/Keyboard_TutorialArduino Keyboard Documentation: arduino.cc/reference/en/language/functions/usb/keyboardArduino special characters: arduino.cc/reference/en/language/functions/usb/keyboard/keyboardmodifiersQMK Documentation: https://docs.qmk.fm/#/QMK GitHub: github.com/qmk/qmk_firmwareQMK Toolbox: github.com/qmk/qmk_toolboxQMK MSYS: https://msys.qmk.fmBuy the parts online (affiliate links):Plate mount stabilizers: https://s.click.aliexpress.com/e/_DEOQ9oFPCB mount screw-in stabilizers: https://s.click.aliexpress.com/e/_DDBVPtNPCB mount clip in stabilizers: https://s.click.aliexpress.com/e/_Dk8nQ7VSwitches: https://s.click.aliexpress.com/e/_ALHz1fArduino Pro Micro: https://s.click.aliexpress.com/e/_9wc5dPDiodes: https://s.click.aliexpress.com/e/_A20xL3SK6812 mini-e LEDs: https://s.click.aliexpress.com/e/_9IoeIzWS6812 3535 LEDs: https://s.click.aliexpress.com/e/_AUtpzBUSB-C Port: https://s.click.aliexpress.com/e/_9vWz2hMy reflow and solder station: https://s.click.aliexpress.com/e/_9uwP45Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro00:31 PCBWay01:10 Overview02:34 Arduino Firmware Basics15:39 QMK Overview18:27 What you need19:22 QMK Structure20:31 config.h23:03 Keyboard.c23:56 Keyboard.h24:50 Rules.mk25:55 Keymaps29:31 Compiling31:07 Programming34:18 Outro
DIY Keyboard Layout and Enclosure - Ep.3 Mechanics Dark Art Guitars 2022-07-01 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302If you always wanted to build your own keyboard but didn't know where to begin, this series is for you. In this video, I go over some important aspects to consider when designing the layout and enclosure of your DIY keyboard. I also show the different stabilizer options and how you integrate them into your design.PCBWay 8th-anniversary sale: pcbway.com/activity/anniversary8sales.htmlProject on PCBWay: pcbway.com/project/shareproject/12_Key_Macro_Keyboard_42e06343.htmlAll the files on GitHub: github.com/datulab/Keyboard_TutorialBuy the parts online (affiliate links):Plate mount stabilizers: https://s.click.aliexpress.com/e/_DEOQ9oFPCB mount screw-in stabilizers: https://s.click.aliexpress.com/e/_DDBVPtNPCB mount clip in stabilizers: https://s.click.aliexpress.com/e/_Dk8nQ7VSwitches: https://s.click.aliexpress.com/e/_ALHz1fArduino Pro Micro: https://s.click.aliexpress.com/e/_9wc5dPDiodes: https://s.click.aliexpress.com/e/_A20xL3SK6812 mini-e LEDs: https://s.click.aliexpress.com/e/_9IoeIzWS6812 3535 LEDs: https://s.click.aliexpress.com/e/_AUtpzBUSB-C Port: https://s.click.aliexpress.com/e/_9vWz2hMy reflow and solder station: https://s.click.aliexpress.com/e/_9uwP45Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro00:22 PCBWay00:57 Overview03:13 Layouts04:59 Examples from my Designs08:40 Step by Step Keyplate14:45 Stabilizers18:52 Tips for 3d printing22:24 Tips for CNC machining24:36 Outro
Advanced DIY Keyboards Step by Step - Ep.2 Controller Dark Art Guitars 2022-06-18 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302If you always wanted to build your own keyboard but didn't know where to begin, this series is for you. In this video, I show how you can integrate the controller into your PCB instead of using an Arduino. I also show some more advanced PCB design tips and how to assemble an SMD board. In the next videos, I will go over all the software options and discuss how to build the perfect enclosure.Project on PCBWay: pcbway.com/project/shareproject/12_Key_Macro_Keyboard_42e06343.htmlAll the files on GitHub: github.com/datulab/Keyboard_TutorialBuy the parts online (affiliate links):Switches: https://s.click.aliexpress.com/e/_ALHz1fArduino Pro Micro: https://s.click.aliexpress.com/e/_9wc5dPDiodes: https://s.click.aliexpress.com/e/_A20xL3SK6812 mini-e LEDs: https://s.click.aliexpress.com/e/_9IoeIzWS6812 3535 LEDs: https://s.click.aliexpress.com/e/_AUtpzBUSB-C Port: https://s.click.aliexpress.com/e/_9vWz2hMy reflow and solder station: https://s.click.aliexpress.com/e/_9uwP45Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro00:28 PCBWay00:56 Overview02:43 Components Overview07:15 ATMega32U409:37 Copying the Arduino11:12 Schematic Overview14:53 PCB Design Tips22:02 Ordering the PCBs24:06 PCB Assembly28:19 Inspection and Trouble Shooting29:48 I'm an idiot31:24 Outro
DIY Keyboard Tutorial Step by Step - Ep.1 The Basics Dark Art Guitars 2022-06-11 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302If you always wanted to build your own keyboard but didn't know where to begin, this series is for you. In this video, I go over all the basics you need to know to design your own keyboard and show how to create your first working prototype step by step. In the next videos, I will show more advanced PCB designs, go over all the software options, and discuss how to build the perfect enclosure.Next Part: youtu.be/NNbpjgahEAsProject on PCBWay: pcbway.com/project/shareproject/Simple_Arduino_Keyboard_8ecdb978.htmlAll the files on GitHub: github.com/datulab/Keyboard_TutorialBuy the parts online (affiliate links):Switches: https://s.click.aliexpress.com/e/_ALHz1fArduino Pro Micro: https://s.click.aliexpress.com/e/_9wc5dPDiodes: https://s.click.aliexpress.com/e/_A20xL3LEDs: https://s.click.aliexpress.com/e/_9IoeIzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro00:40 PCBWay01:07 Overview03:10 Controller Options05:27 Components Library07:17 Key Matrix12:02 Eagle Tips and Tricks14:33 Addressable LEDs16:42 Designing the PCB21:38 Design Rules Check24:48 PCB Design Tips28:06 Exporting the PCB29:06 Ordering the PCBs32:13 Advanced Preview33:08 PCB Assembly34:57 Outro
DIY Split Keyboard from Scratch Dark Art Guitars 2022-05-27 | Big thanks to PCBWay for sponsoring this video. Check them out here and get a $5 coupon: pcbway.com/setinvite.aspx?inviteid=103302Even with all the keyboards I've built in the past, none of them met all my criteria for a daily driver, so I built this ortholinear split keyboard with a bunch of extra keys to have all the functions. I also finally billet machined my first keyboard frame on the RatRig KillerBee which was quite a challenge.USB-C port I used: https://s.click.aliexpress.com/e/_98L05dGateron Keys used: https://s.click.aliexpress.com/e/_9inejDWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro00:39 PCBWay01:13 Overview03:36 PCB Design05:52 Electronics Challenges07:22 Chip Shortage Workaround08:10 Machining the Frame11:58 Custom Keycaps13:39 Getting used to Ortholinear15:25 QMK Firmware16:05 Outro
RatRig KillerBee Review Part 2 - Cutting Metal like Butter Dark Art Guitars 2022-05-13 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comAfter completing the KillerBee build and doing a lot of testing with various projects, it is time to do a detailed review. In the last video, I went over all the options I chose and the modifications I made to the base machine. This time I go into all the details of how you can achieve very impressive cuttings results on your KillerBee by choosing the right tools, cutting recipes, feeds, and speeds.Playlist with all my KillerBee videos: youtube.com/playlist?list=PLzcD3pbxIKwLLGUCZI1hNnE-gvYxpWRcCLinks to things:-----------------------------------------------------------------------------------------------------------------KillerBee: ratrig.com/3d-printing-cnc/cnc-kits/rat-rig-killerbee.htmlClosed Loop Steppers (2.2N): https://s.click.aliexpress.com/e/_9xWN9z2.2kw Spindle: https://s.click.aliexpress.com/e/_AdWGyP1.5kw Spindle: https://s.click.aliexpress.com/e/_AFxQWjNVEM Controller with MPG: https://s.click.aliexpress.com/e/_AL599HAir Blast: https://s.click.aliexpress.com/e/_A96jlVDescent Cheap Endmills: https://s.click.aliexpress.com/e/_9zp74FSaunders Machine Works: saundersmachineworks.com-----------------------------------------------------------------------------------------------------------------Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro and Overview01:03 Paying Bills01:37 Machine Overview09:00 Frame Improvements12:41 Machine Bed / Fixture15:08 Spindle Mount and Accessories17:04 Electronics19:57 Probing20:54 Conclusion22:55 Outro
CNC Machining Montage - RatRig KillerBee Dark Art Guitars 2022-04-15 | Since part two of my review of the RatRig KillerBee isn't quite ready yet and I won't have time to finish it too soon, here is a little montage of the KillerBee in action. A lot of the footage was taken during experimentation, so many cuts could be optimized a bit (and some of them were after filming), so I decided not to put any feeds and speeds on screen. I'll go into more detail on that in part two of my full review.Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
RatRig KillerBee Review Part 1 - 6 Months Later Dark Art Guitars 2022-03-18 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comAfter completing the KillerBee build and doing a lot of testing with various projects, it is time to do a detailed review. In this video, I go over all the options I chose and the modifications I made to the base machine. This should give you a good idea of what you might want in your KillerBee build. In the next part, I will then go into detail on the cutting performance with various materials, including some detailed metal testing.Playlist with all my KillerBee videos: youtube.com/playlist?list=PLzcD3pbxIKwLLGUCZI1hNnE-gvYxpWRcCLinks to things:-----------------------------------------------------------------------------------------------------------------KillerBee: ratrig.com/3d-printing-cnc/cnc-kits/rat-rig-killerbee.htmlClosed Loop Steppers (2.2N): https://s.click.aliexpress.com/e/_9xWN9z2.2kw Spindle: https://s.click.aliexpress.com/e/_AdWGyP1.5kw Spindle: https://s.click.aliexpress.com/e/_AFxQWjNVEM Controller with MPG: https://s.click.aliexpress.com/e/_AL599HAir Blast: https://s.click.aliexpress.com/e/_A96jlVDescent Cheap Endmills: https://s.click.aliexpress.com/e/_9zp74FSaunders Machine Works: saundersmachineworks.comMy motor adapter plate: thingiverse.com/thing:5399431-----------------------------------------------------------------------------------------------------------------Support me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6Amazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQ-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/darkartguitarsWebsite: darkartguitars.comThingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: guitar@darkartguitars.com-----------------------------------------------------------------------------------------------------------------00:00 Intro and Overview01:03 Paying Bills01:37 Machine Overview09:00 Frame Improvements12:41 Machine Bed / Fixture15:08 Spindle Mount and Accessories17:04 Electronics19:57 Probing20:54 Conclusion22:55 Outro
Longer Ray 5 - Most user-friendly Laser? Dark Art Guitars 2022-03-04 | Longer is well known in the 3d printing space, but now they also have a laser engraver. Its main feature is that it comes with a touchscreen controller that allows for offline engraving and is also equipped with wifi. In this video, I test how well this works and what you can use it for.Buy the Longer Ray 5 online: https://s.zbanx.com/r/qjg7MMmRe4D6Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
Project Posthuman Completed - Epic PC Build Montage Dark Art Guitars 2022-02-19 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comThe Posthuman PC build is finally finished. In this video, I show you the entire process of building this crazy PC and end with an epic montage of the final result.If you want to know how we got here, check out the build series here on YT: youtube.com/playlist?list=PLzcD3pbxIKwJpq2bMLe88SqArzfK7jQO9Or the build log on the Bittech forum: forums.bit-tech.net/index.php?threads/posthuman.383399Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
DOUBLE LASER POWER! - Pergear S10 aka. Atomstack X7 Pro Review Dark Art Guitars 2022-02-11 | To get more power than previously possible, Atomstack has combined two laser diodes into one to create a true 10w laser. This is an incredible amount of power, but can it be controlled? The Pergear Laserstorm S10, or more commonly known as the Atomstack X7 Pro is a premium diode laser that can easily compete with many CO2 lasers, but is it any good?Buy the Pergear S10 online: Pergear Store: pergear.com/products/pergear-laserstorm-s10?_pos=1&_sid=0e755a071&_ss=rAmazon: amzn.to/3oJe9UvOr the Atomstack X7 Pro: https://s.click.aliexpress.com/e/_ApJLLXWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro01:37 Assembly03:06 Overview04:34 Touchscreen Interface07:06 M50 Laser Head09:49 Quality Control & Safety15:37 Cutting Results19:41 Engraving Results20:42 Laser Spot Size21:26 Engraving on Wood23:27 Conclusion24:48 Outro
Posthuman PC Build Continues - #4 Dark Art Guitars 2022-01-29 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comI am finally continuing with the Posthuman PC build, and while there are some changes to the end goal, seeing it come together is really awesome. If you haven't already, check out the previous parts here: youtube.com/playlist?list=PLzcD3pbxIKwJpq2bMLe88SqArzfK7jQO9Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
Fastest Hobby Laser?! - Aufero Laser 2 Review Dark Art Guitars 2022-01-19 | I was very impressed with the Aufero Laser 1, so my expectations for the bigger brother, the Aufero Laser 2 were high. And with great pleasure I can say they were met. This machine offers almost all of the features of the Ortur Laser Master 2 Pro but quite a bit cheaper.Aufero Laser 1 Review: youtu.be/olxpb_UAhDMBuy the Aufero Laser 2 online: -----------------------------------------------------------------------------------------------------------------Ortur Web Store: https://s.zbanx.com/r/vEinvhM7UNKbAliexpress: https://s.zbanx.com/r/WTviNJGB27cX-----------------------------------------------------------------------------------------------------------------Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
Building a STEAMPUNK Style Keyboard FROM SCRATCH Dark Art Guitars 2021-12-24 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comThis project unites everything I love, CNC machining, 3D printing, laser engraving, and electronics. After putting it aside for many months, I finally finished the steampunk style keyboard featuring my custom TKL keyboard PCB. It will go along with the Posthuman PC build that I will also continue working on very soon.Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Epic Montage 103:21 Introduction04:20 Design06:15 Electronics08:50 How it goes together09:50 Epic Montage 2
8.5w Endurance vs. Chinese Laser Engravers - Worth the Price? Dark Art Guitars 2021-12-10 | When I first looked at Endurance lasers a few years ago, they were miles ahead of the competition from China. However, in the meantime the Chinese manufacturers have really stepped up their game, so how does the new 8.5W Endurance laser stack up?Some articles I wrote on how to mount this laser to various machines:Ortur Laser Master 2 Pro: endurancelasers.com/how-to-install-the-8-5w-endurance-laser-on-ortur-laser-master-2-proAufero Laser 1: endurancelasers.com/how-to-install-the-8-5w-endurance-laser-on-aufero-laser-1Atomstack A5 Pro: endurancelasers.com/how-to-install-the-8-5w-endurance-laser-on-atomstack-a5-proNeje Master 2S: endurancelasers.com/how-to-install-the-8-5w-endurance-laser-on-neje-master-2sArtillery Sidewinder X1: endurancelasers.com/how-to-install-the-8-5w-endurance-laser-on-artillery-sidewinder-x1Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro00:35 Disclaimer00:59 Backstory01:44 Laser Overview04:35 Laserbox (Controller)07:52 Mounting Options09:57 Connecting Electronics11:22 Software 12:29 Problematic Compatibility14:36 Laser Power Tests16:30 Spot Size Comparison18:10 Price19:40 Outro
Ultimate DIY CNC Controller Dark Art Guitars 2021-12-03 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comI have always wanted a proper controller for my CNC, so I used the PCBs from my TKL keyboard and the 4x4 macro keyboard to build a custom controller interface. The screen is the same tablet computer I was using previously, but now everything is neatly integrated and I can control both the BF30 and the KillerBee CNC with ease.Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
How much LASER POWER do you NEED? - Aufero Laser 1 Review Dark Art Guitars 2021-11-23 | The Ortur Laser Master 2 Pro is one of my favorite laser engravers, but it is quite expensive. The Aufero Laser 1 has the same motherboard and laser diode, but a smaller engraving area, and most importantly a smaller price tag. In this video I compare it to the LM2Pro and also compare the 3 available laser attachment options, so you can get the one that is the best for your application.Buy the Aufero Laser (affiliate link): https://s.click.aliexpress.com/e/_AckBp4Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Introduction00:45 Overview03:35 Laser Options Compared07:47 Spot size comparison09:10 Image Engraving10:34 Cutting12:36 Engraving Clear Acrylic13:43 Conclusion15:18 Outro
Voron 0.1 Detailed Review - 2 Months Later Dark Art Guitars 2021-11-13 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comAfter completing the build of my Voron 0.1 I went ahead and tested it very rigorously. I tried all kinds of materials like Polycarbonate, Nylon, Flexible, ABS, PETG, PLA. I also tried to push the limits of how fast I can print, completing a 3DBenchy in under 10min, which is very fast. During those 2 months of testing, I also noticed some issues that aren't dealbreakers, but definitely something you should keep in mind. Overall I am very happy with this printer, especially considering how much it cost to build.Voron Design: vorondesign.comThe kit I used on Aliexpress: https://s.click.aliexpress.com/e/_A0mQSYWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro01:33 Upgrades02:20 Insulation03:58 Panels05:26 Wobbly X-Rail06:57 Extruder09:34 Input Shaper10:27 High Speed Printing11:40 3DBenchy Print12:44 Going Faster15:07 0.8mm Nozzle17:08 Flexible Materials19:00 Polycarbonate20:49 Nylon21:55 Long Term Observations23:46 Tight Tolerances25:42 Printbed30:24 Partcooling Fans31:47 Outro
Fully Automated 3D Printer Upgrade - 3DQue Quinly Review Dark Art Guitars 2021-10-29 | While there are many systems to control your 3d printer through a web interface, you still have to manually take the finished prints of the buildplate before you can start a new print. 3DQue tries to solve this with the Quinly system. It is both, the hardware you need to easily release the finished prints, as well as the software to schedule upcoming prints for multiple connected printers. While it is not cheap, if you have the right application for it, it can dramatically increase the productivity of your machines and mean that you can achieve the same number of prints with far fewer machines. However, it is also not without it's querks, so in this video, I tell you what the whole experience is like.3DQue website: 3dque.comWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Introduction01:12 What is Quinly?03:37 Hardware Installation07:42 Software Installation08:29 Calibration11:47 Web Interface18:19 Is it worth it? / Who is if for?22:08 Will I continue using it?22:36 Outro
CNC Router ENCLOSURE and First Cuts - RatRig KillerBee #5 Dark Art Guitars 2021-10-22 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comOne of the last steps in building my RatRig KillerBee is the enclosure. It keeps the mess and noise contained, while also protecting me from anything flying off. It also houses the electronics and adds some lighting to the CNC for better visibility. The design is based on the laser enclosure by Further Fabrication, you can check that out here: youtube.com/watch?v=sgM1vZIRphE&list=PLT2B-jiRa_P4blv69gIPtibwSavtNRHN4&index=8RatRig KillerBee (not sponsored): ratrig.com/3d-printing-cnc/cnc-kits/rat-rig-killerbee.htmlGass Struts used (150N): https://s.click.aliexpress.com/e/_AdRWDBRigid LED strips: https://s.click.aliexpress.com/e/_A4wio9LED clip 3d file: thingiverse.com/thing:50284172020 corner brackets: https://s.click.aliexpress.com/e/_97mgDbT-nuts: https://s.click.aliexpress.com/e/_9fg0vTBolts: https://s.click.aliexpress.com/e/_9jeU65Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Build Montage03:05 Overview06:36 What's left to do09:04 First Chips
3D Printed RGB Desk Risers - Behind The Scenes Dark Art Guitars 2021-10-08 | Want to get your own glowing desk risers? Check them out here: https://artof2.ch/store/rgb-desk-risersAfter creating many different desk riser designs over the years, it was time to up the ante and make them RGB illuminated. The journey to get there and being able to mass-produce them on a small scale was no easy feat. In this video, I talk about the backstory and all the different things I learned while creating these risers.Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Intro Montage00:57 Backstory03:27 Electronics Design05:25 3D Printing the Risers06:55 Material Choice08:30 Sourcing Components12:00 What is included?14:50 Outro
RGB Glowing Desk Risers Dark Art Guitars 2021-10-07 | After months of development, we have finally launched our most ambitious product to date. These risers have 6 addressable LEDs integrated that allow you to customize your setup in ways never seen before. Check them out here: https://artof2.chIf you would like to know more, I made a detailed behind the scenes video here: youtu.be/JlZXqr1RU98The risers work very well with a drawer unit, like the Ikea Alex, and a tabletop to make a very flexible office or gaming desk. They elevate the tabletop for a more ergonomic sitting position and give you some extra space at the same time.Dimensions: 5cm wide, 7cm tall (roughly 2in wide, 3in tall)The set includes:4 Illuminated risers4 Risers in either black or white for the backRGB controller and remoteAll cables needed to connect themUSB power cable (you will need your own wall adapter, any USB power brick with 2A or more will work, e.g. one from an old phone)Plenty of cable management clipsIf your desk is free standing, or you would like the glow of the risers against your wall, you can also choose illuminated risers for the back. In that case, we will ship 8 illuminated risers and no plain ones.-----------------------------------------------------------------------------------------------------------------Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
Working with Big Models in Fusion 360 - Maker Software Dark Art Guitars 2021-09-28 | Parametric modeling is one of the great advantages of using Fusion 360. However, if there are too many components your design will become very slow and hard to work on. This is why I show you some tips and tricks in this video, how you can easily modify large models without giving up performance.Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
DIY CNC Electronics - RatRig KillerBee #4 feat. Mach 3, NVEM, Closed Loop Steppers Dark Art Guitars 2021-09-24 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comInstead of going with a GRBL based controller for the KillerBee, as the Blackbox RatRig offers, I decided to go with Mach3. I am also using closed-loop stepper motors and a 2.2kw spindle. This means there are quite a bit of electronics to wire up. In this video, I go over all the parts in detail and explain what they do and how you need to wire them up for the machine to work in the end.RatRig KillerBee (not sponsored): ratrig.com/3d-printing-cnc/cnc-kits/rat-rig-killerbee.htmlClosed Loop Steppers: https://s.click.aliexpress.com/e/_9IrGPISpindle: https://s.click.aliexpress.com/e/_9hVWmkNVEM controller: https://s.click.aliexpress.com/e/_AqsEsWPower supply: https://s.click.aliexpress.com/e/_AAmh9UPhysics Anonymous Screenset: http://www.physanon.com/pa-mach-3-screen-setHelpful videos: Connecting to the NVEM: youtube.com/watch?v=6-07MT0zFT8&list=WL&index=8&t=104sNVEM Config: youtube.com/watch?v=23NlWwOJcLgSpindle VFD Setup: youtube.com/watch?v=Pm6ZD2vEz1sMusic by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------00:00 Assembly Montage00:56 Introduction01:23 PCBWay01:45 Demo05:16 Electronics Overview08:42 NVEM Controller11:20 Stepper Drivers13:08 Spindle VFD14:18 MPG15:32 E-Stop and Limit Switches16:20 Mach3 Configuration24:00 Outro
Fusion 360 3D Sketching - Maker Software Dark Art Guitars 2021-09-21 | There are a few shapes that are just not possible to get with standard 2D sketches and extrude features. If you want to model cables, tubes, or anything of the sort in Fusion360, 3D sketches are the way to go. They work just like regular sketches, but you can leave the plane you're sketching on and go into the 3rd dimension. In this video, I show you how you can control the sketch features in 3D, as some of them can be quite tricky. I also give you real-world examples of where I used this exact technique.Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
Voron 0.1 Build - Best $500 3D Printer? Dark Art Guitars 2021-09-17 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comOver recent months Voron Design has gotten a lot of attention, and that with good reason. In a world dominated by Ender 3 clones, they offer a 3d printer design that truly feels modern. Based on a CoreXY design with linear rails and high-quality components the Voron line of printers is known for its lightning-fast speed and precision. To top it all off the firmware of choice is Klipper with Fluid as the control interface. This gives access to easy customizability and tunability of all the awesome features.All of this comes at a price though, and that is that you need to build this printer yourself. And that doesn't just mean putting a few screws in, but instead printing all the ABS parts yourself, then assembling all the hundreds of little parts, topped off by wiring and firmware configuration. Thankfully there is great documentation that makes this process a lot easier.Next Part: youtu.be/pElU1ry1yRkVoron Design: vorondesign.comThe Kit I used on Aliexpress: https://s.click.aliexpress.com/e/_A0mQSYMusic by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
Intro to Reading GCode - Maker Software Dark Art Guitars 2021-09-14 | Sadly 3D printers and CNC machines don't speak English, so telling them to cut a circle doesn't result in anything. Instead, they speak gcode, so we should probably at least know how to read it to better understand what is going on. In this video, I explain the basics behind how gcode is structured and how you can read it quite easily.Reference for 3D printing commands: marlinfw.org/meta/gcodeMach3 reference for CNC: machmotion.com/documentation/gcode/Mach3-GCode-Language-Reference.pdfTo view your gcode files you can use any text editor. The one I used is called Brackets and allows you to color-code the commands for better readability.Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
New Budget Laser King?! - NEJE Master 2S Review Dark Art Guitars 2021-09-03 | Low-cost laser engravers have been getting better and better over recent years. The NEJE Master 2S 20W is a good example of this, being cheap and easy to use, but also very capable for both engravings as well as some light-duty cutting. NEJE even have their own software that makes engraving even more simple for beginners. In this video, I show you all the best features and also tell you where this laser might fall a bit short.Buy the NEJE Master 2S online:-----------------------------------------------------------------------------------------------------------------NEJE on Amazon-US: amzn.to/3ntrYGZNEJE on Amazon-DE: amzn.to/2YN5OFfNEJE on Amazon-UK: amzn.to/3mUxXUMNEJE Store: bit.ly/3kQOoinNEJE on Aliexpress: https://s.click.aliexpress.com/e/_Ash8JWNEJE Master 2S on Aliexpress: https://s.click.aliexpress.com/e/_A3XrOGNEJE on eBay: ebay.us/2HzXrx-----------------------------------------------------------------------------------------------------------------Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
How to 3D PRINT Parts that FIT Together - Maker Software Dark Art Guitars 2021-08-31 | Modeling things for 3d printing can be very satisfying. If you don't put the proper clearance, however, things will not fit together in the end, as 3d printing is not a perfect process. In this video, I show you some tips and tricks on how you can make your 3d prints actually fit together in the real world.If you're looking for some good general-purpose advice on tolerances for 3d printed mechanical parts, here are the design rules that Voron design uses with great success:-no overhangs over 45 degrees-0.4mm chamfer on surfaces that touch the print bed (and no fillets on the build surface--breaks the 45 degree overhang rule)-loose joints are generally oversized by 0.3-0.4mm diameter for a loose fit or 0.1mm for a press fit. 3.4mm for M3 hardware, 5.4mm for M5 hardware-Countersunk holes "overhanging" the print surface should have a chamfer on them or another method like that to prevent issues-Think about minimum perimeters/shells--try to avoid really thin featuresWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
KillerBee CNC Assembly Finished - RatRig KillerBee #3 Dark Art Guitars 2021-08-27 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comIn this video, I complete the assembly of the RatRig KillerBee. I show you all the steps involved and also talk about the changes and improvements that I've made. I also go ahead and machine a custom x motor mount to reduce the footprint of my machine. Overall I quite like this machine so far, the manual for the assembly is very good and the machine is built extremely solid for a hobby router. I can't wait to test it to its full abilities.RatRig KillerBee (not sponsored): ratrig.com/3d-printing-cnc/cnc-kits/rat-rig-killerbee.htmlClosed Loop Steppers: https://s.click.aliexpress.com/e/_9IrGPISpindle: https://s.click.aliexpress.com/e/_9hVWmkMy motor adapter plate: thingiverse.com/thing:5399431Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techMusic by Zweihänder, check it out here: https://t.co/BpLpIm8lYzSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
Top Settings to 3D Print FASTER with Same QUALITY - Maker Software Dark Art Guitars 2021-08-24 | Who likes waiting hours or days for their 3d prints to finish? What if I told you that there are many settings you can use to speed up your prints without sacrificing any quality! In this video, I go over all the settings I could think of that allow you to get the very most out of your 3d printer. While I show this in Prusaslicer, the same settings are present in most slicer software, so this video applies to them as well.Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
KillerBee CNC Frame Assembly - RatRig KillerBee #2 Dark Art Guitars 2021-08-20 | Big thanks to PCBWay for sponsoring this video. Check them out here: pcbway.comIn this video, I show you the process of assembling the RatRig KillerBee frame. I go over installing the linear rails, how to align them and how to shim the blocks to get smooth action. Not only do I show you what the manual tells you to do, but also where you can go a bit further to get even more precision out of your machine.RatRig KillerBee (not sponsored): ratrig.com/3d-printing-cnc/cnc-kits/rat-rig-killerbee.htmlClosed Loop Steppers: https://s.click.aliexpress.com/e/_9IrGPISpindle: https://s.click.aliexpress.com/e/_9hVWmkWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techMusic by Zweihänder, check it out here: https://t.co/BpLpIm8lYzSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
3D Modeling using Photos in Fusion360 - Maker Software Dark Art Guitars 2021-08-17 | Often times you will want to create a 3d model for something that has to fit a real-world object. While you could measure a bunch of points on it, it might be easier to take a picture of it to help you model it up. In this video, I show you the best ways to use pictures to help you 3d model better and quicker inside of Fusion360.Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
Sturdy and FLAT CNC Table - RatRig KillerBee #1 Dark Art Guitars 2021-08-13 | To complement my big BF30 CNC I decided to build a RatRig KillerBee hobby CNC router. It'll be great for working on larger pieces and with smaller tools, thanks to its big working envelope and fast spindle. In this video, I show how I built a table that is flat with no twist in it to provide a good base. With these cheaper CNCs, having a flat surface is important, as the frame is not strong enough to stay flat on its own.Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYzWant to support me directly and look extra stylish? Check out my merch: https://merch.datulab.techSupport me (for free) while shopping online (affiliate links):-----------------------------------------------------------------------------------------------------------------Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6GearBest: gearbest.com/?lkid=11143361Banggood: banggood.com/custlink/D3G3GMUOYLAmazon (US): amzn.to/2pJVveJAmazon (DE): amzn.to/2pK1YFxeBay.com: http://ebay.us/xd6vPaeBay.de: http://ebay.us/AwHtLQCDKDeals: cdkdeals.com/ap/cdkey-homeMadethebest: https://www.madethebest.com?aff=40-----------------------------------------------------------------------------------------------------------------My links:-----------------------------------------------------------------------------------------------------------------Instagram: instagram.com/datulabtechWebsite: https://datulab.techStore: https://store.datulab.techBuilds.gg: builds.gg/users/datulabtech-86151Thingiverse: thingiverse.com/DatulabTechGithub: github.com/datulabE-Mail: info@datulab.tech-----------------------------------------------------------------------------------------------------------------
