Fantasia Elegance
Easy Wire Wrapped Jewelry Tutorial : Flower Earrings Part 2
updated
Materials:
18, 24, and 26 gauge round soft wires (I used sterling from RioGrande.com)
3.5mm diameter round beads (I used sterling metal beads)
1 side drilled briolette. Heart, Pear, or cushion Square work well. I buy my gemstones from Etsy
Small jump rings, chain, and clasp to finish.
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Jewelry Polishing Cloth: amzn.to/3fOWMuf
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
Materials:
12 gauge round aluminum wire: amzn.to/3YxzL6s
1/8" wide satin ribbon (optional): amzn.to/3FAMYTr
Fray Check or clear nail polish: amzn.to/3uTDqy2
Tools Used:
Chain Nose Pliers (I used Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters (I use Xuron Maxi Shear: amzn.to/2rLWcdf )
Ruler/tape measure: amzn.to/2DleG82 or amzn.to/3Wtdx3T
Jewelry Polishing Cloth or rag: amzn.to/3fOWMuf
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
One oval cabochon (flat back & domed top stone) about 22x30mm. I used regalite that I bought on Etsy, but another option is: amzn.to/3gFn4Fs
18 gauge round and 18 gauge half-round wire, soft. (I used copper from Riogrande.com). 8, 9, 9, 10" pieces of 18 ga round, various lengths of half round.
Chain for pendant. (I used a copper cable chain, 2.5mmx3.5mm that I bought on Etsy.)
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials needed:
Sandpaper in variety of grits - 100 to at least 600
Buy here: amzn.to/3RCT2ji amzn.to/3RyEReM and amzn.to/3eDBVz7
Optional: rust preventer, buy Boeshield T9 here: amzn.to/3BBTOrf
or use mineral or machine oil
Other rust removal products: amzn.to/3BsPpXm or amzn.to/3B4xg0u
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials Needed:
For earrings, bracelet: 20 (5 inch piece per) & 24 gauge round soft wire
For necklace: 18 (6 inch piece) & 22 gauge round soft wire.
I used copper and sterling silver wire from RioGrande.com
Stones: 6mm round gemstones for bracelet (I used glass pearls) Pear briolettes for earrings/necklace (I used 10x15 glass crystal beads)
I purchase my beads/stones from Etsy, FireMountainGems.com and RioGrande.com
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/3nxjL15 Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance
Thanks for watching, and happy crafting!
Music: “Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr... Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
12 gauge aluminum wire, 18 inches ( amzn.to/3Cuo5oK )
3/8" wide ribbon, plaid, 7 inches ( amzn.to/3HwnSW2 )
1/8" wide ribbon, solid satin, 8 inches ( amzn.to/3oDr6OW )
Super glue, clear nail polish, or fray check ( amzn.to/30IVMGl )
Tools Used:
Chain Nose Pliers (I used Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/3nxjL15
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Learn to create a fall / autumn oak leaf pendant or earrings in this wire wrapping tutorial.
Materials:
18, 24, and 26 gauge wires, round dead soft. I used copper from RioGrande.com
Your choice of chain, beads, or ear wires for finishing.
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/3nxjL15
Ruler: amzn.to/2DleG82
Jewelry Polishing Cloth: amzn.to/3fOWMuf
My wire bobbins: amzn.to/3lB32cp
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
1 pair briolette beads, approx 10x10 to 10x14mm
20 gauge round soft wire, 1 piece 2" and 2 pieces 1.25" per earring
26 and 28 gauge round soft wire, various lengths
1 drilled bead, 3.5mm diameter
Pair of ear wires
I used sterling wire and bead purchased from RioGrande.com and faceted square cushion briolettes purchased from Etsy.
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/3nxjL15
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Supplies:
Chip or nugget stones, undrilled, 5-10mm size. You can get sea glass like I used here: etsy.com/shop/Seagulda?ref=cart_shop_name_click&cart_id=4881899595§ion_id=18922800
18 gauge round wire, soft or half-hard
22 gauge round wire, soft
28 gauge round wire, soft
(I used sterling silver and purchase all my wires at RioGrande.com)
Ear wires (for earrings) or bail & chain (for pendant)
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Jewelry Polishing Cloth: amzn.to/3fOWMuf
My wire bobbins: amzn.to/3lB32cp
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
20 gauge round soft wire (I used sterling from Riogrande.com)
24 gauge round soft wire
Side drilled pear or heart briolette, about 12x15mm
Clasp
Small jump rings (2-3mm inner diameter)
Fine cable chain
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/3nxjL15
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
20 and 24 gauge wire, round soft (I purchase my wire from RioGrande.com)
Ear wires
Beaded variant: 21 gauge wire, 4mm bicones, and 3mm metal beads
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/3nxjL15
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials Needed:
Top drilled (side to side) briolettes. I purchased mine from various shops on Etsy.com
Style 1: 26 gauge round soft wire (or whatever fits in your stone)
Style 2: 26 gauge round soft wire (or whatever fits in your stone)
Style 3: 22 gauge round soft wire (or whatever fits in your stone)
I purchase my wire from RioGrande.com.
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Jewelry Polishing Cloth: amzn.to/3fOWMuf
My wire bobbins: amzn.to/3lB32cp
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
20 gauge round soft wire (two 10 inch pieces)
28 gauge round soft wire for weaving
Chain or cord of your choice
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
My wire bobbins: amzn.to/3lB32cp
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
18 gauge round soft wire (I used sterling from RioGrande.com)
20 gauge half round soft wire
8 or 10mm diameter round drilled bead or stone
Ear wires
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/3nxjL15
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
**I receive some compensation for purchases made through Amazon affiliate links, at no additional cost to you.**
Materials:
20 gauge round soft wire, 10" for US size 7 ring.
28 gauge round soft wire (optional) about 4"
One 6mm round bead or gemstone, center drilled (I used these amzn.to/30Bwd6s )
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ring Mandrel: amzn.to/3bQcWEI
Ruler: amzn.to/2DleG82
Fine or ultra fine point sharpie
Follow me on social media!
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Pen or other round object.
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
Line style: 18 gauge jump rings, 6mm and 3.5mm inner diameter
Flower style: 6mm ID 20 gauge and 2.5mm ID 22 gauge jump rings
Tools Used:
Chain Nose Pliers x2 (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
1 crystal point, side drilled at top.
20 and 28 gauge round soft wire (I used silver from RioGrande.com)
Chain or cord of your choice
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
My wire bobbins: amzn.to/3lB32cp
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
22 and 26 gauge round dead soft wire (I used raw copper from RioGrande.com
3mm crystals or beads x6 (I used clear Swarovski bicones from FireMountainGems.com)
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Template document: etsy.com/listing/905886565/wire-wrapped-pumpkin-pendant-template
Materials:
18 gauge round soft wire (I used copper from RioGrande.com)
20 gauge half round wire (I used copper from RioGrande.com
My Tools:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/3nxjL15
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
You can find me here:
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links
Materials:
12 gauge wire: 6"
18 gauge wire: 2 pieces of about 48" each
26 gauge wire: various lengths, about 24" total.
My wire bobbins: amzn.to/3lB32cp
Tools:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Tape measure: amzn.to/34JTw11
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Metal Files: amzn.to/2HUO4iZ
Emory Boards: amzn.to/3kYq793
Find me at:
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
20 and 28 gauge round dead soft wire (I used silver-filled from RioGrande.com)
2 small briolettes (per earring): about 7x4mm to 9x5mm in diameter
Ear wires
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
My wire bobbins: amzn.to/3lB32cp
Ruler: amzn.to/2DleG82
Jewelry Polishing Cloth: amzn.to/3fOWMuf
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Items used:
- Baking soda
- Aluminum foil (NOT non-stick type)
- Glass dish or bowl
- Hot water
- Plastic utensil
Other products for cleaning silver:
Jewelry Polishing Cloth: amzn.to/3fOWMuf
Silver Cleaner Dip: amzn.to/3mJs22u (The Brilliant brand is currently unavailable, but this would work just as well).
You can check out my Etsy shop here:
Etsy: etsy.com/shop/FantasiaElegance
And follow me on social media:
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
Scrap pieces of 20 gauge round wire, ranging from 1 to 2 inches long (I used silver-filled wire from RioGrande.com)
16 gauge wire for frame (about 6 inches)
28 gauge wire for weaving/binding (various 6" lengths)
10x14mm teardrop briolette (optional)
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Jewelry Polishing Cloth: amzn.to/3fOWMuf
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Ring Size Conversion Chart: http://www.ringsizes.co
Materials:
20 gauge square wire (soft) and 20 gauge half round wire (soft) - I used copper from RioGrande.com
One 8mm diameter round cabochon
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ring Mandrel: amzn.to/3kB45JC
Ruler: amzn.to/2DleG82
Jewelry Polishing Cloth: amzn.to/3fOWMuf
Ultra fine point sharpie (optional): amzn.to/3arAde9
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
18 and 24 gauge wires (I used round, dead soft silver-filled wire from RioGrande.com). Can also use 20 gauge twisted square wire
Beads/stones (I used Swarovski crystals in 6 and 5mm, and Round glass cat's eye beads in 8, 6, and 4mm: amzn.to/2X8n9ou )
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
18 and 26 gauge round soft wire (I used copper from RioGrande.com)
10x10mm heart briolettes
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
My wire bobbins: amzn.to/3lB32cp
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance ( instagram.com/fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
20 gauge round wire
Cording (I use waxed black cotton cord: amzn.to/3eMqAIh )
Sharp Scissors
Super glue (optional)
Clasps/fasteners or your choice
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
20 gauge round wire, approx 10 inches (I used copper from RioGrande.com)
Bail or large jumpring
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook page: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Etsy: etsy.com/shop/FantasiaElegance
Facebook page: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
End Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
Materials:
20 and 28 gauge round dead soft wire
Optional: 2.5mm metal bead
Bail and chain of your choice
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Optional: Jeweler's torch, flux, and pickle
Etsy: etsy.com/shop/FantasiaElegance
Facebook page: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
12 gauge round soft wire (13 and 14 gauge also work)
18 gauge round soft wire (20 gauge also works)
*I used silver aluminum wire from Amazon: amzn.to/2yKN2ln
Cord, chain, or jeweler's elastic: amzn.to/2LttGna
Large lobster clasp: amzn.to/2WtAk3i
Tools:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Tape measure: amzn.to/3bqNW3v and/or ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook page: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
20 and 28 gauge round, soft wire (I purchased mine from RioGrande.com)
6mm beads (2 per earring) Cat's eye beads on Amazon: amzn.to/2W9VBxF (I purchase my gemstone beads on Etsy)
Ear wires of your choice
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Fine tip sharpie (optional): amzn.to/3bXkjbn
Etsy: etsy.com/shop/FantasiaElegance
Facebook page: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Free Template Download: dropbox.com/s/uzqlt4gp9ows6lx/Wire%20Wrapped%20Caduceus%20Template_FantasiaElegance.pdf?dl=0
Or purchase from my shop to support me! etsy.com/listing/1105211451/wire-wrapped-caduceus-template
Materials:
I purchased all of mine at RioGrande.com
20 gauge wire, round soft (I used sterling silver)
28 gauge wire, round soft (I used fine silver)
4mm round bead (I used sterling silver)
Tools Used:
Bobbin my wire is wound on: amzn.to/3aXbNIG
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook page: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
20, 22, and 26 gauge round dead soft wire (I used sterling silver from RioGrande.com)
Pearls or other beads: 3, 4, and 6mm round and approx 7x9 to 8x11mm teardrop. (I used Swarovski crystal pearls in "white" from FireMountainGems.com. They have the teardrops as well, item number H20-1270GP
Headpins, at least 1 inch long.
Small jump rings: 2.4 to 3mm inner diameter, 20-22 gauge works well.
Earwires of your choice
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
I used both wire-wrapping and metalwork techniques, as well as a custom shaped wire-wrap setting for a beautiful London Blue Topaz heart-cut gemstone. This one definitely pushed me to my limits; I had over 6 hours of footage and didn't even record all the work!
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
All wires used were sterling silver from RioGrande.com. SS findings (metal beads, clasp, chain, etc.) also purchased at Rio Grande.
I buy my faceted gemstones from Etsy and Ebay.
My Tools:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Sanding squares: RioGrande item#: 337204 Or these: amzn.to/3aVwtQM
Rotary tool: I bought this kit: amzn.to/3b1nUnO and also these polishing heads: amzn.to/2QjfAb6
My Solder Setup:
Butane torch: I used this one amzn.to/3d3cOjX but there are many less expensive options on Amazon and at local hardware stores. For example, this one looks quite good too: amzn.to/39VTseC
Butane: amzn.to/2TTSWbp (can probably purchase locally for less)
Charcoal block (good for amplifying heat): amzn.to/2INcwzR
Magnesia block (good for controlling heat & stabilizing small pieces): amzn.to/2QjN35a
Soldering board (goes under charcoal & magnesia blocks to protect my desk): amzn.to/2wWvDF0
Soldering pick: amzn.to/2ISCcuV
Flux: amzn.to/390747v
Third hand purchased from RioGrande.com
Silver wire solder purchased from RioGrande.com
My Pickling Setup:
I use pickle from RioGrande.com Have also used this amzn.to/2TTQOAr and it works very well.
Pickle pot (my exact one is no longer available, but it’s just a 16-ounce crockpot. You can purchase a pickle pot in a set with pickle and tongs here: amzn.to/3aXJIAC )
Copper tongs: amzn.to/2xJeHSH
To protect my surface, I set my pot on a free tile sample from Home Depot, with a silicone hot pad underneath. Probably overkill, though :)
My Tumbler:
Lortone 3A Rotary Tumbler: amzn.to/2TURi9s
loaded with 2lbs of steel jeweler’s shot: amzn.to/2w20f7Z
I just load the tumbler with the shot, add my jewelry item/s, fill halfway with warm water, add a drop of dawn dish soap, seal it up and tumble for 30-minute intervals until I reach my desired polish.
Music (in order used):
“Prelude No. 6” by Chris Zabriskie
http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/06_-_Prelude_No_6
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
“Prelude No. 3” by Chris Zabriskie
http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
“White” by Kevin Macleod
http://incompetech.com/music/royalty-...
Licensed under Creative Commons Attribution 3.0 Unported license (CC BY 3.0) creativecommons.org/licenses/by/3.0/us
"Simple Duet" by Kevin MacLeod (incompetech.com)
License: CC BY (http://creativecommons.org/licenses/by/4.0)
"Parting of the Ways - Part 1" by Kevin MacLeod (incompetech.com)
License: CC BY (http://creativecommons.org/licenses/by/4.0)
Music from filmmusic.io
“Prelude No. 16” by Chris Zabriskie http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/16_-_Prelude_No_16
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
"Heartwarming" by Kevin MacLeod (incompetech.com)
License: CC BY (http://creativecommons.org/licenses/by/4.0)
Music from filmmusic.io
“Perspectives” by Kevin Macleod
http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300027
Licensed under Creative Commons Attribution 3.0 Unported license (CC BY 3.0) creativecommons.org/licenses/by/3.0/us
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/23_-_Prelude_No_23
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
***Note: I may receive some compensation for purchases made through Amazon affiliate links, at no extra cost to you.
20 gauge round soft wire (I used silver filled from RioGrande.com)
One 6mm round bead (I used these: amzn.to/3aXG0ru )
Two 3mm metal beads (optional)
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ring Mandrel (grooved): amzn.to/2RJMUsL
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials:
18, 20, and 26 gauge round dead soft wires (I used 1/10 silver filled from RioGrande.com)
4mm beads, 17 for each earring. I used alternating 1/10 silver filled and fiber optic glass: amzn.to/38nRfrf I got my metal beads from RioGrande, but they've since been discontinued. Here are some of the same thing from Copper Wire USA on Etsy: etsy.com/listing/150800300/4-mm-100-pcs-silver-filled-round-beads?ref=cart
Your choice of earwires. I used RioGrande.com Item #: 627822
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Ring Mandrel: amzn.to/2WN3yaA
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Finished size: 3.5 inches wide by 4.25 inches high
Materials:
Wire: 12, 13, or 14 gauge round dead soft: one 30” piece (76.2cm)
And 18 gauge round dead soft: 28” (71.1cm) plus six smaller lengths
I recommend aluminum wire. I used this (from Amazon): amzn.to/36ztTho and RioGrande Item # 13470
8mm round faceted bead: amzn.to/2tigITw or FireMountainGems Item Number: H20-A2571GL
1/8” wide satin ribbon: 8” amzn.to/38KGIaE
Tools Used:
Chain Nose Pliers, Wubbers: amzn.to/2z1nxcj
And Xuron Tweezer Nose: amzn.to/2sCatti
Round Nose Pliers, Wubbers: amzn.to/2FlJpVj
Flush Cutters, Xuron Maxi Shear: amzn.to/2rHcapz
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
"We Wish you a Merry Christmas" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0
**Note: I may receive some compensation from purchases made through Amazon affiliate links, at no additional cost to you.
Part 1: youtu.be/z9yClKemYek
Part 2: youtu.be/-MoiiLFXBpc
Wire used: 20 gauge round (dead soft or half hard) and 24 gauge round dead soft - I used sterling from RioGrande.com
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Part 1: youtu.be/z9yClKemYek
Part 3: youtu.be/q-89t_Un8Nw
Wire used: 20 gauge round (dead soft or half hard) - I used sterling from RioGrande.com
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Part 2: youtu.be/-MoiiLFXBpc
Part 3: youtu.be/q-89t_Un8Nw
Wire used: 20 gauge round (dead soft or half hard) - I used sterling from RioGrande.com
Metal beads: 2.5mm, 3mm, and 3.5mm (or similar)
Tools Used:
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Part 2 here: youtu.be/hvTqG0i7LYk
Materials needed:
10mm round bead with large hole (I used glass cat's eye beads from here: amzn.to/33R92Fl )
16 gauge round dead soft wire, 9" (I used copper from RioGrande.com)
18 gauge twisted square dead soft wire 2 pieces of 4.5", 4 pieces of 3.75", and 2 pieces of 3.5" (can substitute 18 or 16 gauge round)
20 gauge half round wire, dead soft, multiple small lengths. (Can substitute 22 gauge round wire)
Tools Used:
Bead reamer (if your bead's hole is too small) This is the one I have : amzn.to/2NPZCEi though this one looks even better, and is cheaper: amzn.to/2O34fLy
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 3” by Chris Zabriskie
http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Learn how to make an elegant bracelet using square and half round wire with a round focal bead in this beginner-to-intermediate wire wrapping tutorial.
Materials needed:
10mm round bead with large hole (I used glass cat's eye beads from here: amzn.to/33R92Fl )
16 gauge round dead soft wire, 9" (I used copper from RioGrande.com)
18 gauge twisted square dead soft wire 2 pieces of 4.5", 4 pieces of 3.75", and 2 pieces of 3.5" (can substitute 18 or 16 gauge round)
20 gauge half round wire, dead soft, multiple small lengths. (Can substitute 22 gauge round wire)
Tools Used:
Bead reamer (if your bead's hole is too small) This is the one I have : amzn.to/2NPZCEi though this one looks even better, and is cheaper: amzn.to/2qRzL61
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 3” by Chris Zabriskie
http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Materials (per earring):
Three 6mm round gemstones/beads with hole size at least 0.82mm. I used Swarovski crystal pearls in gray and dark lapis, purchased from FireMountainGems.
20 gauge round dead soft wire. I used silver-filled from Riogrande.
24 gauge round dead soft wire. I used silver-filled from RioGrande.
26 gauge round dead soft wire. I used silver-filled from RioGrande.
Small metal beads, two sizes. I used 2.5mm and 3mm. You'll need two of each size per earring. I got mine from RioGrande.com
Your choice of ear wire!
Tools Used:
Chain Nose Pliers (Click here for the ones I used): amzn.to/2z1nxcj
Round Nose Pliers, (Click here for the ones I used): amzn.to/2FlJpVj
Flush Cutters, (Click here for the ones I used): amzn.to/2DAo8Wd
Ruler: amzn.to/2DleG82
Check out this item if you need larger holes in your beads: amzn.to/2C4IfsS
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 3” by Chris Zabriskie
http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Supplies:
I used Sculpey III in colors Moss and Chocolate, but any medium/dark green and medium brown oven bake clay should work. Your best bet is to look for them at a craft store or Walmart, but here's a sampler that may have suitable colors: amzn.to/2oApbiT
Acrylic craft paint. I couldn't find exact colors, so I mixed my own. You'll want a bright yellowish green, and a dark, slightly bluish green for the acorn, and a light tan for the cap. Try looking up a picture of a green acorn and taking it to a craft store or Walmart to look over their paint selection!
Sculpey Glaze, Glossy: amzn.to/2M81HuI
Paint Brushes: amzn.to/32652Qk
Tools I Used:
Chain Nose Pliers (Click here for the ones I used): amzn.to/2z1nxcj
Round Nose Pliers, (Click here for the ones I used): amzn.to/2FlJpVj
Flush Cutters, (Click here for the ones I used): amzn.to/2DAo8Wd
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music Attributions:
Music from filmmusic.io
"Heartwarming" by Kevin MacLeod (incompetech.com)
License: CC BY (http://creativecommons.org/licenses/by/4.0)
“White” by Kevin Macleod
http://incompetech.com/music/royalty-...
Licensed under Creative Commons Attribution 3.0 Unported license (CC BY 3.0) creativecommons.org/licenses/by/3.0/us
Music from filmmusic.io
"Simple Duet" by Kevin MacLeod (incompetech.com)
License: CC BY (http://creativecommons.org/licenses/by/4.0)
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/23_-_Prelude_No_23
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
Materials:
18 and 28 gauge round, dead soft wire (I used sterling silver from RioGrande.com
1 bead each in 6, 5, 4, and 3 mm (I used Swarovski bicones in purple velvet, amethyst, light amethyst, and crystal) I got mine at FireMountainGems.com
1 bead each in 4, 3.5, 3, 2.5, and 2mm (I used sterling beads from RioGrande.com
Tools:
Chain Nose Pliers (Click here for the ones I used): amzn.to/2z1nxcj
Round Nose Pliers, (Click here for the ones I used): amzn.to/2FlJpVj
Flush Cutters, (Click here for the ones I used): amzn.to/2DAo8Wd
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Emery board/nail file (sandpaper or metal file would work too): amzn.to/2lLt2Ze
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 3” by Chris Zabriskie
http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
Note, I may receive some compensation (at no extra cost to you) for purchases made through Amazon affiliate links.
Wire needed: 20 and 28 gauge, round dead soft. I purchase my wires from RioGrande.com
Tools Used:
Chain Nose Pliers (Click here for the ones I used): amzn.to/2z1nxcj
Round Nose Pliers, (Click here for the ones I used): amzn.to/2FlJpVj
Flush Cutters, (Click here for the ones I used): amzn.to/2DAo8Wd
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
“Prelude No. 3” by Chris Zabriskie
http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
“White” by Kevin Macleod
http://incompetech.com/music/royalty-...
Licensed under Creative Commons Attribution 3.0 Unported license (CC BY 3.0) creativecommons.org/licenses/by/3.0/us
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Wire used: 22 gauge round dead soft (I purchase mine from RioGrande.com)
For 1.5" diameter hoops use 6 strands of 7 inches per earring
For 1" diameter hoops, use 6 strands of 5 inches per earring
Tools Used:
Chain Nose Pliers (Click here for the ones I used): amzn.to/2z1nxcj
Round Nose Pliers, (Click here for the ones I used): amzn.to/2FlJpVj
Flush Cutters, (Click here for the ones I used): amzn.to/2DAo8Wd
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Ring Mandrel: amzn.to/2WN3yaA (optional)
Masking tape or painters tape (optional): amzn.to/2LGZE1p
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 3” by Chris Zabriskie
http://freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/by/4.0
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.


