Leo LautsprecherHallo, hier zeige ich euch den praktischen Teil der Lautsprecherentwicklung. Lautsprecherentwicklung ist sehr komplex und mit diesem Video kann ich gerade mal die Spitze vom Eisberg abdecken. Durch das Video solltet ihr allerdings auch selbst gute Ergebnisse erreichen können. Durch das Mini DSP kann die Entwicklung auch mit dem Wissensstand weiter wachsen.
Vielen Dank an Blue Planet Acoustic! Von ihnen wurde mit das Mini DSP und das Umik 1 zu Verfügung gestellt.
Lautsprecher selbst entwickeln - PraxisLeo Lautsprecher2017-02-16 | Hallo, hier zeige ich euch den praktischen Teil der Lautsprecherentwicklung. Lautsprecherentwicklung ist sehr komplex und mit diesem Video kann ich gerade mal die Spitze vom Eisberg abdecken. Durch das Video solltet ihr allerdings auch selbst gute Ergebnisse erreichen können. Durch das Mini DSP kann die Entwicklung auch mit dem Wissensstand weiter wachsen.
Vielen Dank an Blue Planet Acoustic! Von ihnen wurde mit das Mini DSP und das Umik 1 zu Verfügung gestellt.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Komplexe Lautsprecher ohne viel Werkzeug bauen - Tutorial für AnfängerLeo Lautsprecher2019-11-07 | Hi, hier zeige ich euch, wie man einen Lautsprecher ohne rechte Winkel selbst baut. Ich habe mir dabei als Challenge vorgenommen, das so zu planten, dass ihr es als Anfänger einfach umsetzen könnt. Einen Haken gibt es allerdings - ihr braucht einen 3D-Drucker. Mittlerweile sind die aber sehr günstig und einfach zu bedienen geworden und reichen von der Druckqualität für ein Projekt dieser Art vollkommen aus.
Im Video habe ich erzählt, dass ich letzten Monat einen 3D-Drucker aufgebaut habe und dass das sehr einfach war. Das was ein Anycubic Kossel Linear Plus. Euch würde ich aber eher einen Creality Ender 3 empfehlen. Der kostet noch weniger und liefert etwas bessere Ergebnisse. Für diesen Lautsprecher geht aber so ziemlich jeder 3D-Drucker, das muss wirklich nichts besonderes sein.
Im Lautsprecherbau wird oft Sketchup verwendet. Im 3D-Druck ist das nicht ausreichend, weil Sketchup mit gebogenen Flächen überhaupt nicht gut klar kommt. Wenn ihr ein CAD-Programm für 3D-Druck sucht, nehmt Autodesk Fusion360.
Hier ist noch der Link zu meiner Webseite und der Thingiverse Seite: https://www.just-imagine-speakers.de/projekte/nicht-mobile-lautsprecher/ct256-nosquare/
Vielen Dank für eure Aufmerksamkeit!Sure Electronics Programmer ICP1 und ICP3Leo Lautsprecher2018-03-03 | Hallo, heute stelle ich die beiden Programmer von Sure Electronics (Wondom) vor, ICP1 und IPC3.
Hier die im Video angesprochenen Links: ICP1 gibts bei Sure Electronics bei dem JAB3 und dem DSP als optionales Extra zum Auswählen. ICP3: http://store3.sure-electronics.com/wondom-in-circuit-programmer-with-ble-bluetooth-for-app-control ICP1 aus Deutschland: https://www.hobbyhifiladen.de/programmer-fuer-wondom-dsp-s
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Mobile Lautsprecher Entwickeln Tutorial V2Leo Lautsprecher2017-08-09 | Hallo, über 5 Jahre nach meinem ersten, ausführlichen Video zum mobilen Lautsprecherbau bekommt ihr hier eine überarbeitete Version.
Da das Video auch das methodische Vorgehen in der Entwicklung von Lautsprechern behandelt, gestaltet sich das Inhaltsverzeichnis auf den ersten Blick etwas durcheinander, im Video macht es allerdings Sinn: Einleitung 00:00 Anforderungsdefinition 4:10 Grundkonzeptauswahl 10:30 Auswahl aller Teile und Simulation vom Verhalten 22:50 Erstellen eines Bauplans 53:05 Produktempfehlungen 1:05:08 Anregungen 1:17:35 Schlusswort 1:21:00
Hier die im Video versprochenen Links: Fragebogen im Hififorum: http://www.hifi-forum.de/index.php?action=browseT&back=1&sort=lpost&forum_id=118&thread=3915
Bei Fragen und Anregungen stehe ich euch gerne hier und per Email zur Verfügung ( info@just-imagine-speakers.de )
Viel Erfolg bei euren zukünfigen Projekten, LeoSwirling Tutorial - DeutschLeo Lautsprecher2017-03-25 | Hallo, heute zeige ich euch, wie ihr Werkstücke swirlen könnt. Da Borax, ein häufig verwendeter Wasserzusatz, in Deutschland nicht nicht erhältich ist, sind die meisten Tutorials auf Youtube nicht 1:1 übertragbar. Als Farbe könnt ihr Humbrol Enamel Farbe in der Ausführung "gloss" nehmen. Auf Ebay sind die bereits ab 1,60€ erhältlich. Da die Methode ohne Borax keine deckende Farbschicht erzeugt, muss unbedingt passend grundiert werden.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Lautsprecher selbst entwickeln - TutorialLeo Lautsprecher2017-02-16 | Hallo, heute zeige ich euch, wie man in den eigenen vier Wänden einen einfachen Lautsprecher entwickeln kann. Das Video soll euch den Weg zur ersten Eigenentwicklung erleichtern.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Sure Electronics TPA250BT - ReviewLeo Lautsprecher2016-11-15 | Hallo, Heute stelle ich euch den Sure TPA250BT vor - ein Verstärker mit sehr großem Funktionsumfang, darunter Bluetooth, Lautstärkeregelung, DSP-Anbindung, Solarzellen Anbindung, Akku laden, uvm. Die Solarzellen werden dabei mit dem MPPT Verfahren betrieben, d.h. ein Akku kann geladen werden, wenn nicht die volle Leistung des Solarmoduls vom Verstärker benötigt wird. An den Akku Anschluss des Verstärkers muss ein passendes Ladegerät, wenn geladen werden soll. Auf der Verstärkerplatine ist keine Ladeelektronik. Durch die Akku Erweiterung ist das aber sehr elegant gelöst. Der Verstärker wurde mir von Hobbyhifiladen zu Verfügung gestellt.
Hier noch ein paar Links: Sure Electronics TPA250BT: http://www.hobbyhifiladen.de/sure-electronics-tpa250bt-bluetooth
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Sigma Studio Tutorial | Sure DSP | FreeUSBiLeo Lautsprecher2016-09-06 | Hallo, hier stelle ich euch die Software Sigma Studio vor und zeige welche Schritte ihr durchlaufen müsst, damit ihr euere Vortellung in Realität umwandeln könnt. Zu dem Sure DSP habe ich auch noch mehr Videos gemacht. https://www.youtube.com/watch?v=h9KueCHdCqc
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Sure ADAU1701 DSP- Zusammenbau und Treiber InstallationLeo Lautsprecher2016-09-06 | Hallo, heute zeige ich euch, wie ihr das FreeUSBi korrekt zum laufen bekommt. Außerdem gebe ich einige Tipps zur Verbindung mit dem Sure Electronics ADAU1701 DSP.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Sure ADAU1701 - Ein DSP für 20$Leo Lautsprecher2016-09-05 | Hallo! Das Sure DSP ist eine digitale Aktivweiche mit einem ADAU1701 Chip. Der gleiche ist auch im MiniDsp oder dem Free Dsp. Man kann sie am PC mit dem Programm Sigma Studio komplett frei programmieren. Es stehen 2 Audio Eingänge und 4 Audio Ausgänge zu Verfügung. Damit kann man dann zwei 2-Zegler steuern, oder einen Vierwegler, oder ein 2.1/2.2 System. Man kann es auch verwenden um Breitbändern einen Bassboost zu spendieren. Oder noch viele andere Sachen.. Damit kann man eine ganz normale Lautsprecherweiche konstruieren, aber auch Spielerein wie Bassboost, Loudness, Subsonic und Laufzeitkorrektur verwenden. Zusätzlich verfügt das DSP über 12 frei programmierbare GPIO Pins. Damit lassen sich Informationen von Schalter abfragen, oder man kann damit eine Lampe ein und aus schalten. Auf dem Board sind vier Potis zum manuellen nachregeln von Parametern, damit man nicht immer den PC anschließen muss. Zum Programmieren braucht man allerdings ein Programmier Kit. Da verwende ich das Free USBi, das ihr für 20€ auf Ebay Kleinanzeigen findet (als neuer Bausatz). Das DSP hat im Auslieferungszustand eine einfache 2.1 System Schaltung. Die ist allerdings kaum besser als normale 2.1 Verstärker, deshalb ist mMn das DSP nur mit Programmierkit sinnvoll. Sure DSP bei Sure Electronics http://store3.sure-electronics.com/adau1701-audio-digital-signal-processor-kernel-board und im Hobbyhifi-Laden http://www.hobbyhifiladen.de/sure-electronics-dsp Datenblatt des ADAU1701 http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1701.pdf
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Lautsprecher Rucksack - Hifi TurtleLeo Lautsprecher2016-07-13 | Die Eckdaten in der Übersicht:
-Gehäuse: 25l aus GFK, hergestellt mit verlorener Form aus Styrodur -Tieftöner: Mission CP164 -Breitbänder: Visaton FRS8 -Verstärker: TPA3116d2 2.1 Verstärker -Akku: Geschlachteter Laptop Ersatzakku (4s, 5200mAh) -Gewicht: 6kg -Oberflächenfinish: Swirling Arbeitszeit: Weit über 100h
Ich bin hellauf begeistert. Erstmal ist der Rucksack natürlich extrem praktisch, und klingt auch noch super. Die Bauteile passen einfach sehr gut zusammen, ich bin selbst überrascht, wie gut die Kombination klappt. Mehr Informationen zum Lautsprecher und die Odyssee zum Endergebnis findet ihr in meinem Baubericht: http://www.hifi-forum.de/index.php?action=browseT&back=3&sort=lpost&forum_id=118&thread=4781
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Laptop Akkus zerlegen /Lipos selber bauenLeo Lautsprecher2016-05-22 | Hallo, hier zeige ich euch, wie ihr aus neuwertigen Laptop Ersatzakkus eine Energiequelle für eure Mobilen Lautsprecher baut.
Hier das Ebay Angebot meiner beiden Akkus: http://www.ebay.de/itm/272058582680?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Falls der Link einiges Tages abgelaufen ist, ich habe das Angebot gefunden, als ich nach "Laptop Ersatz Akku 14,4V 5200mAh" gesucht habe. Der Akku mit seinen 75Wh kostet 16€+2€ Versand, einen 86Wh (7,2Ah) Bleiakku bekommt man für 12€+5€ Versand. Als Ladegerät geht das hier vorgestellte Turnigy Accucel 6, oder ein IMax B6.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Festivallautsprecher Beta One - PlanungLeo Lautsprecher2016-03-23 | Hallo, Heute stelle ich die verbesserte Version der Alpha One vor. Als Teile kommen zum Einsatz: Tieftöner: Thomann The Box Speaker 12-280/8-W Satelliten: Mivoc SB25JM Verstärker: STA508 + TC2000 Bleiakkus: 2x 12V 45Ah Autobatterie Ladegerät: Ansmann ALCS 2-24A Autoradio: AEG AR4027 Evtl Netzteil: Schaltnetzteil 24V, 15A Verbinder: 36mm Flansch K&M 19656, Butterfly Verbinder Zusätzliche Elektronik: Voltmeter, Sicherung (15A), Schalter, Speakon Buchsen+Stecker Zusätzliche Hardware: Holz, Farbe, Boxenschutzecken, Lautsprechergitter
Hier noch der Link zu meiner Webseite: http://www.just-imagine-speakers.de/p...Eckige Chassis einfräsenLeo Lautsprecher2016-03-20 | Hallo, hier zeige ich euch, wie ihr Chassis die nicht rund sind einfräst.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Lautsprecherbausatz Aras MKIILeo Lautsprecher2016-03-19 | Hallo, hier ein kurzes Video zu meinen Aras MKII.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Chassis Auswahl für Lautsprecher - Warum die Nennbelastbarkeit überflüssig istLeo Lautsprecher2015-11-25 | Hi, hier zeige ich euch, nach welche Kriterien ich Chassis für eine neues Projekt auswähle. Es ist etwas lang geworden, wer die Kurzfassung möchte, kann auch auf meiner Webseite nachlesen: http://www.just-imagine-speakers.de/grundlagen/das-lautsprecherchassis/
Hier noch ein paar Händler (wenn ihr findet einer fehlt, gerne anmerken) http://www.lautsprechershop.de/index_intro_de.htm http://www.oaudio.de/ http://www.spectrumaudio.de/ http://www.quint-store.com/ http://www.traumboxen.de/index.htm
Hersteller: http://www.visaton.de/de/ http://www.tb-speaker.com/ http://www.monacor.de/home/Auflösung des 4000 Abonenten GewinnspielsLeo Lautsprecher2015-11-21 | Hallo, Den TA2024 MKII hat "Jan Janowski" gewonnen. Den kleinen BT Verstärker "TLM". Der große BT Verstärker geht an "quaseln" und der 2.1 Verstärker an "jostmor Bender" Ich wünsche euch damit viel Spass. Ich versuche euch zu konaktieren, oder ihr schreibt mir eine Email an Info@just-imagine.speakers.de
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.4000 Abonenten GewinnspielLeo Lautsprecher2015-11-13 | Hallo, heute veranstalte ich ein kleines Gewinnspiel um den Wachstum von meinem Kanal zu feiern.
Hier nochmal alle wichtigen Infos: Um teilzunehmen müsst ihr einfach nur einen Kommentar schreiben - jeder natürlich nur einen. Wenn ihr einen Verstärker nicht gebrauchen könnt, schreibt das auch einfach in die Kommentare. Einsendeschluss sind ab jetzt eine Woche. Ihr könnt also bis zum 20.11.2015 um 20:00 teilnehmen. Ich lose dann auf der Seite Random.org einen Gewinner aus. Falls jemand erwischt wird, der eine der vorher genannten Bedigungen nicht erfüllt, lose ich einfach nochmal. Ich versuche euch auf allen mir möglichen Wegen zu erreichen. Die Versandkosten übernehme natürlich auch ich.
Zu gewinnen gibt es einen von vier Verstärkern. Hier die Bezeichnungen mit Links: TA2024 MKII http://www.ebay.de/itm/Mini-Digital-Verstarker-Modul-Platine-Amplifier-Board-MKll-TA2024-Audio-/351311666696?hash=item51cbce9e08:g:AfMAAOSwcldUZd2s
TPA3116D2 Verstärker mit extra Subwoofer-Ausgang: http://www.ebay.de/itm/New-50W-x2-100W-TPA3116D2-2-1-HIFI-Digital-Subwoofer-Amplifier-Verst-Board-/161534467667?hash=item259c345e53:g:o6EAAOSweW5VZTtz
Ich wünsche euch allen viel Glück bei der Verlosung und den Gewinnern viel Spass mit den Preisen.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.
UPDATE: Den TA2024 MKII hat "Jan Janowski" gewonnen. Den kleinen BT Verstärker "TLM". Der große BT Verstärker geht an "quaseln" und der 2.1 Verstärker an "jostmor Bender" Ich wünsche euch damit viel Spass. Ich versuche euch zu konaktieren, oder ihr schreibt mir eine Email an Info@just-imagine.speakers.de3D gedruckter Bluetooth Lautsprecher mit Powerbank als AkkuLeo Lautsprecher2015-09-23 | Hallo, Hier zeige ich euch meinen "Banksprecher"- ein kleiner Lautsprecher mit Powerbank als Akku. Das gehäuse ist aus PLA Kunstoff mit meinem 3D Drucker (Mendel90) gedruckt.
Hier noch die verbauten Teile: 2x Aurasound Ns2 326 8at 1x 5V Verstärker PAM8403 1x Xiaomi Powerbank 5200mAh 1x Bluetooth USB Stick modul
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.HerzlautsprecherLeo Lautsprecher2015-09-01 | Hi, hier stelle ich euch einen Lautsprecher in Herzform vor. Das Chassis ist ein Visaton BF45, der Verstärker ist auf Basis eines TDA2822. Stromversorgung gibts von drei AA-Batterien/Akkus.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Lautsprecher Betrieb am 230V Netz + SicherungenLeo Lautsprecher2015-08-19 | Hier zeige ich euch, wie man seinen Lautsprecher an der Steckdose betreiben kann. Am Ende erkläre ich noch, wo man welche Sicherung braucht.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Holzsorten im LautsprecherbauLeo Lautsprecher2015-07-17 | Hi, Hier vergleiche ich ausführlich die Verschiedenen Holzsorten, die im Lautsprecherbau typisch sind.
10:18 Wasserresistenz 13:30 Benötigte Wandstärke 16:17 Klang der Hölzer
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Über fertige Frequenzweichen - zu Besuch bei KlangkofferLeo Lautsprecher2015-06-26 | Hallo, hier zeige ich euch, dass es bei vielen Lautsprechern mit fertigen Frequenzweichen noch viel Verbesserungspotential gibt.
Das zeige ich euch am Beispiel eines Klangkoffers. Wenn ihr selbst auf der suche nach einem stylischen Lautsprecher seid, schaut mal auf www.Klangkoffer.de vorbei. Die Lautsprecher sind nach euren Wünschen sehr individuell gestaltbar.
In dem Video erkläre ich alles rund ums Thema Frequenzweiche.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherselbstbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Last Man Standing Bauvideo, Tutorial, SelbstbaulautsprecherLeo Lautsprecher2015-05-08 | Hallo, heute stelle ich euch nochmal die Last Man Standing vor, dieses mal habe ich aber auch beim Bau gefilmt und Soundchecks gedreht.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Lautsprecher Löten für AnfängerLeo Lautsprecher2015-04-21 | Hallo, Noch nie gelötet und etwas Bammel davor? Dann seid ihr hier richtig, denn hier zeige ich euch, wie leicht das alles ist.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Selbstbau Fahrradlautsprecher für den GepäckträgerLeo Lautsprecher2015-03-02 | Hallo, Hier zeige ich euch ein Lautsprecherpaar, dass man an den Gepäckträger von einem Fahrrad hängen kann.
Verbaut sind ein Gradient W160Al und ein Visaton DTW72-8. Der Weichenplan wird in ca 1 Woche auf meiner Webseite verfügbar sein.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Oberfräsentisch mit 3D gedruckten TeilenLeo Lautsprecher2015-01-27 | Hallo, hier zeige ich euch meinen neuen Frästisch, der keine Wünsche offen lässt. Man kann die Höhe oberhalb und an der Seite der Tischplatte verstellen. Alle Teile der Höhenverstellung sind mit meinem Mendel90 aus PLA Kunststoff gedruckt.
Die Oberfräse ist eine Festool OF1010.
Im Ausschnitt am Anfang ist das Ende der Fräsung nicht ganz sauber, weil der Fräser relativ billig (und Stumpf) ist. Außerdem hatte ich viel Material weggefräst, so dass der Fräser stark belastet war.Ein Crosscut Sled für die KreissägeLeo Lautsprecher2015-01-22 | Hier stelle ich euch einen Schlitten vor, mit dem man sehr präzise Schnitte mit der Kreissäge herstellen kann.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Mein Mendel90 und was man damit machen kannLeo Lautsprecher2014-12-17 | Heute stelle ich euch meine neuste Anschaffung vor :) Ich hoffe das Viedeo gefällt euch.
Mehr zum Thema gibts bald auf meinem neuen Kanal: Leos Lets Print.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Maximalleistung von VerstärkernLeo Lautsprecher2014-12-09 | Hier erkläre ich euch, warum man aus 12V an 4Ohm nicht mehr als 18W RMS bekommen kann.Sure Verstärker und eine Alternative dazuLeo Lautsprecher2014-12-03 | Hier stelle ich euch eine Alternative zu den, in letzter Zeit etwas teurer gewordenen, Sure Verstärkern vor, den TA2024 MKII. Er kostet nur weniger als die Hälfte und misst sich besser und soll auch besser klingen. Ihr findet ihn bei Ebay wenn ihr einfach nach TA2024 sucht.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Lipos explodieren - sind die blauen Li-Ionen Akkus von Ebay gefährlich?Leo Lautsprecher2014-11-19 | Hallo, In diesem Video überlade ich Lithium Ionen Akkus. Da die Tests eben eine Weile dauern ist das Video etwas länger geworden. Aber ich habe möglichst viel vom Test drin gelassen, ihr könnt ja einfach durchspulen wenns euch zu uninteressant wird :)
Ein kleines Inhaltsverzeichnis hilft euch vielleicht etwas: 3:50 - erster Test mit dem Labornetzteil 5:50 - jetzt mit dem Netzteil von Pollin 7:00 - Test mit dem mitgelieferten Netzteil 7:45 - erstes Fazit 8:15 - jetzt ohne die vorschaltete Elektronik 15:05 - erste starke Rauchentwicklung 16:35 - finales Fazit
Da gute Angebote zu den Akkus mitlerweile schwierig zu finden sind, werft mal einen Blick auf die Suchmaschine "pandacheck.com" Damit könnt ihr sehr viele vertrauenswürdige China-Shops durchsuchen und bekommt so die besten Angebote auf einen Blick. Mit dem Suchbegriff "12V 6800mAh" bekommt man schon die besten Angebote.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Mobile Tenöre Tuning: SperrkreisLeo Lautsprecher2014-11-05 | Hallo, Hier stelle ich euch eine simple Methode vor, um etwas mehr Klang aus den Tenören zu holen: Einen Sperrkreis. Die Bauteile vom Sperrkreis habe ich bei Intertechnik bestellt.
Den Sperrkreis habe ich nicht selbst entwickelt, sondern die Daten der Bauteile hier gefunden: http://www.jobst-audio.de/sonstige/165-tenoeremod Dieser Sperrkreis ist nur für die Tenöre gültig, für andere Chassis oder eine stark andere Gehäusebreite braucht man andere Bauteilwerte.
Ihr braucht pro Sperrkreis eine Luftspule mit 0,39mH Induktivität und einem Durchmesser von 0,71mm. https://www.intertechnik.de/Shop/Frequenzweichenbauteile/Drosselspulen/071mm-Luftspule/_LU32-039-071_1768,de,62,3472
Dann noch pro Sperrkreis einen (bipolaren) Kondensator mit 15µF. Die Spannungsbelastbarkeit spielt keine Rolle. Wichtig ist allerdings, das "normale" Elkos aus Netzteilen oÄ nicht gehen, da sie nicht Bipolar sind. https://www.intertechnik.de/Shop/Frequenzweichenbauteile/Kondensatoren/Elko-rauhe-Folie/_ERA-15-100-1_1768,de,606,3806
Und zu guter letzt pro Sperrkreis noch einen 4,7Ohm Wiederstand. Belastbarkeit ist auch hier nicht wichtig, die üblichen 4W reichen gut aus. Ich habe einen MOX (Metalloxid) Widerstand gewählt: https://www.intertechnik.de/Shop/Frequenzweichenbauteile/Widerstaende/MOX-Widerstaende-4-Watt/_MOX04-47-2_1768,de,894,4084
Insgesamt kommt man somit pro Sperrkreis auf einen Preis von 4,33€.
Die Videos zum Klang findet ihr hier, dann könnt ihr selbst entscheiden, ob euch der Unterschied 8,66€ wert ist.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Wie funktioniert ein Lautsprecher ChassisLeo Lautsprecher2014-10-29 | Hallo, Hier stelle ich euch den Aufbau und die Funktionsweise von einem Konus-Chassis vor.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Selbstbau Lautsprecher Simplicity - TutorialLeo Lautsprecher2014-09-14 | Hallo, Hier stelle ich euch meine neuste Creation, Simplicity, vor. Es handelt sich um einen mobilen Lautsprecher, der auf schlichtes Design und günstige Komponenten setzt. Das Design habe ich mir vom Hifi-Forum Nutzer "Couka" abgeschaut.
Verbaut sind als wichtigste Komponenten: Sure 2x8W Verstärker Lipo Akku mit 6800mAh Kennwood 13cm Koaxialchassis
"Straw Hats" - "Bodi Bill" https://www.youtube.com/watch?v=aXc1evQg53sAbsaugtisch/Downdraft TableLeo Lautsprecher2014-09-05 | Für sauberes und sicheres Arbeiten ist eine weitgehend Staubfreie Werkstatt zwingend notwendig. Damit die Staubentwicklung von vorn herein eingedämmt wird, habe ich mir einen kleinen Absaugtisch gebaut, den ich euch heute vorstellen möchte.2.1 Bluetoothmodul von Sure ElectronicsLeo Lautsprecher2014-08-21 | Hallo, Hier zeige ich euch das 2.1 Bluetoothmodul von Sure Electronics.
Viel SpassWie vertiefe ich ein rundes Lautsprecherchassis? / EinfräsenLeo Lautsprecher2014-08-12 | Hier zeige ich euch, wie ihr ganz einfach ein rundes Lautsprecherchassis einfräsen könnt. Dazu braucht ihr nur eine Oberfräse und einen Fräszirkel.
Bald kommt auch noch ein Video wie Einfräsen bei nicht runden Chassis funktioniert.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Selbstgebauter Fräszirkel Version 2.0Leo Lautsprecher2014-08-06 | Hier stelle ich meinen neuen Fräszirkel für die Oberfräse (Festool OF1010) vor.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Fertig entwickelten Lautsprecherbausatz verändern - Was ist zu beachten?Leo Lautsprecher2014-07-04 | Hier erkläre ich euch, was ihr bei schon fertig entwickelten Lautsprechern bedenkenlos ändern könnt und wo ihr aufpassen müsst.
Folgende Einfussfaktoren auf den Klang handle ich ab: Gehäusebauart: 2:07 Volumen: 5:56 Gehäusebreite: 6:30 Dämpfung/Dämmung: 10:22 Krumme/Schiefe Wände: 10:49 Ausrichtung: 12:02 Gehäusematerial: 14:00 Oberflächenfinish: 15:37 Chassis: 16:28 Frequenzweichen-Bauteile: 16:49Festival Box Alpha One 460€ Festivallautsprecher Bauvideo, TutorialLeo Lautsprecher2014-06-24 | Hier stelle ich euch mein neustes Projekt "Alpha One" vor. Die Box ist mit Abstand die größte, schwerste, lauteste, bassreichste, teuerste Box die ich bis jetzt gebaut habe. Deshalb musste das "Alpha" in den Namen. Das "One" kommt von der Einfräsung auf der Oberseite, dem Defqon One Logo.
Hier nochmal die Bauteile in der Übersicht: Magnat Edition four limited Visaton BG17 The Box 12-280/8-W Autobatterie 75Ah Ladegerät Autoradio Sirene Griffe Bespanngitter Kabel 6mm² Warnex Lüfter Voltmeter Polklemmen Chinchkabel Schalter Einbauschale Schutzecken 3m² 19mm Spanplatte
Und hier die Links zu den Klangviedeos: Alle Videos sind mit meinem Handy aufgenommen, nicht wie üblich mit meinem Mikrofon. Einige Videos sind gesperrt, aber mit einem Addon wie Proxtube könnt ihr sie entsperren. Lautstärkentest 0m bis 100m https://www.youtube.com/watch?v=p_V6AispWBg
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.
Noch ist kein Artikel zu der Box oben, aber bald kommt noch einer. Dann auch mit Schalt- und Bauplan.Alpha One - Planung (12 TT, 4x6,5 BB, 2x75Ah Autobatterie)Leo Lautsprecher2014-06-09 | Hier zeige ich euch die Planung einer sehr großen Festivalbox mit insgesamt über 200l Außenvolumen.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Selbstbaulautsprecher CT227 Geswirlt / SwirlingLeo Lautsprecher2014-06-08 | Hallo, Hier stelle ich euch meine neu aufgebauten CT227 vor. Die Front ist Geswirlt. Hierbei habe ich die Borax Methode gewählt. Da aber Borax hier nicht erhältlich ist (es ist sogar verboten), habe ich normalen Waschkraftverstärker genommen. Der Lack ist Humbrol Enamel Lack.
Chassis sind von Aurasound. Aurasound ns3-193-8a Aurasound nt1-204-4fb / 8fb
Zu kaufen gibt es die Teile meines Wissens nur bei Quint Audio.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Kabel selbst konfektionierenLeo Lautsprecher2014-05-29 | Hier stelle ich euch vor, wie ich mein vorher langweiliges schwarz-rotes Kabel optisch seher aufgewertet habe.
Das Kabel kostet 4,35€ plus 1,9€ pro Lfm.
Der Festpreis setzt sich zusammen aus 1,85€ für meinen Selbstbau-Splitter und 2,5€ für Bananenstecker. Der Preis pro laufender Meter sind 1,5€ für 1m 2x4mm² Kabel und 40ct pro 1m Geflechtschlauch.
Das einzig besondere bei mir ist eigentlich mein Splitter. Denn normalerweise zahlt man für einen einfachen Splitter schon 8€ (z.B. von Viablue) und das war mir einfach zu teuer. Wenn der Lautsprecher nur 30€ kostet, scheut man sich nochmal das gleiche fürs Kabel auszugeben...Last man StandingLeo Lautsprecher2014-05-25 | Hie stelle ich euch meine "Last Man Standing" vor. Verbaut ist ein Visaton BG20 in 30l, ein Kinter MA700 und ein 7,2Ah Bleiakku. Boden und Deckel sind aus Eschenholz.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Dayton NeedleLeo Lautsprecher2014-05-19 | Hier stelle ich euch meine Needle vor. Als Chassis habe ich mich für die Dayton RS-100-4 entschieden. Bestellt habe ich für ca 100€ bei Spectrum Audio. Die Biegung ist mit geschlitztem MDF gemacht. Die Kanten habe ich grob verspachtelt, anschließend weiß grundiert und zu guter letzt noch mit Dupli Color Graniteffektlack besprüht.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.MDF Biegen: 2 MethodenLeo Lautsprecher2014-05-12 | Hier zeige ich euch, wie ihr MDF-Holz biegt. Bei der ersten Methode macht man mit der Kreissäge viele parallele, dünne Nuten nebeneinander und lässt nur 1-2mm Material stehen. Das Holz wird sehr flexibel. Je dünner die Nut desto besser, allerdings ist man häufig auf die 3mm Blätter der meisten Kreissägen beschränkt. Bei der zweiten Methode leimt man dünne MDF Platten aufeinander. Hierzu braucht man eine stabile Form. Die Platten werden sehr stabil (Stichwort Eigenspannungen).
Zu speziellem Biege-MDF kann ich nichts sagen, da es das bei mir in der Region nicht zu kaufen gibt.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Lautsprecher aus schon vorhandenem Gehäuse bauen | Flexibles TestgehäuseLeo Lautsprecher2014-04-20 | Hier zeige ich euch, wie ihr herausfindet, ob ein schon vorhandenes Gehäuse für den Lautsprecherbau geeignet ist und was ihr tun könnt, falls es das nicht ist. Im zweiten Teil stelle ich mein flexibles Testgehäuse vor, das ich seit 2 Jahren im Einsatz habe.
Zur Zeit bin ich noch auf der Suche nach einer günstigeren Alternative zu dem doch recht teuren Fließ.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.Lautsprecherbau Praxis - Mobile Tenöre - 45€ Lautsprecher TutorialLeo Lautsprecher2014-04-13 | Heute erzähle ich euch, wie ich meine mobilen Tenöre gebaut habe, einen sehr sehr guten Lautsprecher für unglaubliche 44,54€. Hier ist eine Preiliste, gleich schreibe ich noch etwas genaueres zu den einzelnen Teilen:
Die Monacor SP8/4SQ sind die Chassis, die in den Tenören veraut sind. Es sind recht große 3" Chassis, die schon aus dem kleinen Gehäuse einen echt guten Bass zaubern. Und das für 8,5€ pro Stück - Das Preis/Leistungs-Verhältnis ist unschlagbar.
Einen Zuschnittsplan und ein 3D Sketchup Modell werde ich hochladen.
Als Verstärker habe ich mich für die 2x15W Version von Sure Electronics entschieden. Die Platine hat geringe Einbaumaße, läuft mit 12V und ist Class D - deshalb hält der Akku auch so lange.
Das Voltmeter habe ich von Ebay. Einfach nach "Digital Voltmeter" suchen.
Bei dem Akku habe ich mich für einen leichten und kleinen Li-Ion. Gekauft ist er bai Ebay. Suchbegriff: "Rechargeable 12V 1800mAh". Es gibt noch weitere Versionen mit 3000mAh, 6800mAh und 9800mAh. Einen ausführlichen Testbericht von mir verlinke ich am Ende.
Das Klinke Kabel ist von Reichelt. Ihr findet es mit der Artikelnummer: "AVK 118-0020". Es ist nur 20cm lang.
Das Furnier habe ich bei dem Ebay Verkäufer Elder_kontor ersteigert. Jeden Sonntag abend laufen bei ihm um die 70 Furniersorten aus. Da die Angebote alle bei 1€ starten, kann man da immer mal wieder sehr günstig an Furnier kommen. Es werden da oft große Mengen an Furnier angeboten.
Der Schalter ist ebenfalls von Reichelt. Ihr findet ihn mit der Artikelnummer: WS R13-112 AAAA
Die Dämmung findet ihr, wenn ihr nach Sonofil sucht.
Den Travel-Adapter habe ich gebraucht, da das Ladegerät das mit meinem Akku geliefert wurde, leider keinen Euro-Stecker hatte, sondern einen England-Stecker, glaube ich.
Zugegebenermaßen: Die 45€ sind nur ohne Versand. Da hier wild aus verschiedenen Shops zusammengemischt ist, kommen da sicher nochmal über 10€ Versand obendrauf.
Die genauen Maße der Box mit Frontblende sind: 228 x 324 x 116
Nochmal ein Baubericht in schriftlicher Form auf meiner gerade veröffentlichten Webseite (da gibts noch viel mehr zu entdecken): http://www.just-imagine-speakers.de/projekte/mobile-lautsprecher/tragbare-ten%C3%B6re/Wie schließe ich einen Verstärker von Sure an?Leo Lautsprecher2014-04-12 | Hallo, heute zeige ich euch, wie ihr Verstärker von Sure Electronics anschließt. Die Verstärker werden auf Ebay vom Verkäufer "Sure-Hifi" vertrieben.
Schaut für mehr Infos und sehr viele Grundlagen zum mobilen Lautsprecherbau auch auf meiner Website: http://www.just-imagine-speakers.de/ vorbei.