PSPi v6 Parts unboxing - 2024 update Make or Break Society 2026-09-29 | PSPi v6 Parts unboxing - 2024 update
Revive your Sega Game Gear by recapping it Make or Break Society 2024-06-21 | Thanks for checking out the Make or Break Society! I hope this video helped you.You can buy a cap kit and loads of other parts at:www.handheldlegend.com/MAKEORBREAKSOCIETYIf you use my link you'll save 5% on your entire order over $30Here are my Gridfinity parts traysprintables.com/model/856333-gridfinity-parts-traysLinked Videos:Power Back Upgrade PT1: youtu.be/TIMKX2jX7uU Power Back Upgrade PT2: youtu.be/0_cS79O32qYPower Back Upgrade PT3: youtu.be/-lB0-RnHVvoGame Gear Disassembly: youtu.be/UcoQEUQfi20Cap values for VA1 837-9024 main board1x 33uF 6.3V4x 10uF 6.3V1x 100uF 6.3V1x 4.7uF 35V1x 68uF 6.3V1x 100uF 4V2x 0.47uF 50V1x 22uF 6.3VCap values for 837-8562 audio board3x 100uF 6.3V2x 47uF 4VCap Values for 837-9025 power board1x 22uF 35v1x 100uF 25v1x 820uF 6.3vFor Cap Values on other boards check out the Console5 wiki:wiki.console5.com/wiki/Game_GearLink Tree: https://linktr.ee/makeorbreaksocietyThanks to Text Studio for the Thumbnail Font and Vectonauta on Freepik for the thumbnail backgroundtextstudio.comfreepik.com/free-photo/painted-grey-background-with-metal-texture_13410587.htmChapters:0:00 – Introduction0:52 – Required Items2:40 – Tear down3:55 – Inspection5:45 – Main board cap Removal6:34 – Main board Prep\pad repair8:46 – Recap c1, c4, c54, and c5510:40 – Recap c45, c43, c47, c49, and c6812:14 – Recap c11, c42, and c1413:24 – Test the main board14:08 – Audio board cap Removal and prep14:50 – Recap audio c1, c2, and c315:44 – Recap audio c5, and c716:15 – Reassembly17:23 – Final
Make the Sega Game Gear look good as new Make or Break Society 2024-06-16 | Thanks for watching my Sega Game Gear Cleaning video. Stay tuned for the recapping video coming soon. Once it's out I will leave a link below. If when you take your Game Gear apart you find broken parts You can buy loads of Game Gear and other handheld parts at:www.handheldlegend.com/MAKEORBREAKSOCIETYIf you use my affiliate link you'll save 5% on your entire order over $30Game Gear Recapping: Link will be here once it's outPower Back Upgrade PT1: youtu.be/TIMKX2jX7uUPower Back Upgrade PT2: youtu.be/0_cS79O32qYPower Back Upgrade PT3: youtu.be/-lB0-RnHVvoHere are my Gridfinity parts traysprintables.com/model/856333-gridfinity-parts-traysThanks for checking out the Make or Break Society! Link Tree: https://linktr.ee/makeorbreaksocietyThanks to Text Studio for the Thumbnail Fonttextstudio.com
Make retro games boot #retrogaming Make or Break Society 2024-06-14 | Thanks for checking out the Make or Break Society! If your in the market for Handheld parts consider checking out HandHeld Legend.If you use my affiliate link you'll save 5% on your entire order over $30www.handheldlegend.com/MAKEORBREAKSOCIETYLink Tree: https://linktr.ee/makeorbreaksociety
All MoBSs HandHelds Make or Break Society 2024-06-13 | Hope you enjoyed the video showing (almost) all my handhelds. In the video I mentioned that I just ordered parts from HandHeld Legend. If you need parts for any of the handhelds in this video use my link to save 5% off your entire order over $30www.handheldlegend.com/MAKEORBREAKSOCIETYThanks for checking out the Make or Break Society! Link Tree: https://linktr.ee/makeorbreaksociety
All MoBSs HandHelds #retrogaming #retro Make or Break Society 2024-06-13 | Thanks for checking out the Make or Break Society! Link Tree: https://linktr.ee/makeorbreaksociety
Nintendo Game Boy Advance SP - Full Clean Make or Break Society 2024-06-12 | Nintendo Game Boy Advance SP Full CleanIn this video I'm taking an old Game Boy Advanced SP and making it look as good as we can without replacing the shell. This Game Boy Advance SP is in decent shape considering it was released in 2003. In a future video It will get a shell swap and also an IPS/usb-c upgrade.But for now let's get it looking better!Here's my Gridfinity Parts Trays if your interested. printables.com/model/856333-gridfinity-parts-traysThanks for checking out the Make or Break Society! Link Tree: https://linktr.ee/makeorbreaksociety
Sega Power Back Upgrade - PT3 Final Assembly Make or Break Society 2024-06-09 | Welcome To Part 3 of my Saga Game Gear PowerBack Lithium upgrade Video. Links to Part 1 and 2 can be found below.Part 1: youtu.be/TIMKX2jX7uUPart 2: youtu.be/0_cS79O32qYParts List:103450 2000mah lithium batteryhttps://a.co/d/5qbeow42s BMShttps://a.co/d/0cbDR9rJST 2.5mm battery connector:https://a.co/d/5U6vkBnBarrel Jack:https://a.co/d/cCgYHS5Thanks for checking out the MoBS! Link Tree: https://linktr.ee/makeorbreaksociety
Sega Power Back Upgrade - PT2 Soldering and Testing Make or Break Society 2024-06-08 | Welcome To Part 2 of my Saga Game Gear PowerBack Lithium upgrade Video. Links to Part 1 and 3 (when it's out) can be found below.Part 1: youtu.be/TIMKX2jX7uUPart 3: youtu.be/-lB0-RnHVvoParts List:103450 2000mah lithium batteryhttps://a.co/d/5qbeow42s BMShttps://a.co/d/0cbDR9rJST 2.5mm battery connector:https://a.co/d/5U6vkBnBarrel Jack:https://a.co/d/cCgYHS5Thanks for checking out the MoBS! Link Tree: https://linktr.ee/makeorbreaksociety
Sega PowerBack Upgrade - Part 1 Disassembly and Planning Final Make or Break Society 2024-06-07 | Welcome To Part 1 of my Saga Game Gear PowerBack Lithium upgrade Video. Links to Part 2 and 3 can be found below once they are out.Part 2: youtu.be/0_cS79O32qYPart 3: youtu.be/-lB0-RnHVvoParts List:103450 2000mah lithium batteryhttps://a.co/d/5qbeow42s BMShttps://a.co/d/0cbDR9rJST 2.5mm battery connector:https://a.co/d/5U6vkBnBarrel Jack:https://a.co/d/cCgYHS5Thanks for checking out the MoBS! Link Tree: https://linktr.ee/makeorbreaksociety
Next Project Preview - The Sega Game Gear Make or Break Society 2024-05-27 | This is a Preview of my next project. I will be repairing and restoring this Sega Game Gear bundle I picked up for about $50 CADthere will likely be 3 videos in this series1. Game Gear Repair\restore2. Battery Pack Upgrade\Repair3. Carrying case restorationExpect the first video in this series in the next 2-3 weeksThanks for checking out the MoBS! Link Tree: https://linktr.ee/makeorbreaksociety
PSPi v6: Troubleshooting After PSP Upgrade Make or Break Society 2024-04-18 | Today We are trouble shooting 4 of the more common problems that would happen after first assembly of the PSPi v6Link Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety0:00 - Intro0:18 - Power LED on then off2:52 - Power LED solid on4:07 - Power + Back light + Activity LED5:40 - No USB Data
Raspberry Pi Gaming: Retropie vs Batocera vs Recalbox vs Lakka Make or Break Society 2024-03-01 | It's time for a Head 2 Head 2 Head 2 Head. In the ring we have:RetroPieRecalBoxBatocera andLakkaAll will enter but only 1 will leave! I've made sure to add Chapters so you can find the tests for your Favourite cores.All tests were done on the custom PSPi handheld. If you need parts for your other handhelds check out HandHeld Legend at:www.handheldlegend.com/MAKEORBREAKSOCIETYIf you use my link you'll save 5% on your entire order over $30.Links to the distros.RetroPie: retropie.org.ukRecalBox: recalbox.comBatocera: batocera.orgLakka: lakka.tvOtherMod PSPi Builds: github.com/othermod/PSPi-Version-6/wiki/Operating-SystemsI'm sure there are better ways to do these test so feel free to leave me a comment about them and maybe I'll make a part 2Also Let me know what video you want to see next.Link Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety0:00 – Introduction2:58 – Sega Saturn6:19 – Sony PlayStation9:06 – Nintendo 6412:17 – Sega Dreamcast15:28 – Nintendo GameCube16:58 – Nintendo DS20:17 – Sony PSP23:38 – Bonus Points24:54 – Conclusion
PSPi v6 Retail Assembly Make or Break Society 2024-01-09 | It's Finally available! This is the Retail version of the PSPi v6! Thanks to @othermod for getting it out to me so quickly! Links to the Previous cleaning and assembly videos.Pt1. Cleaning: youtu.be/nOCFkZVByx8Pt2. Assembly: youtu.be/wrqCZ1XJQz4Let me know what you want to see next in the comments.Link Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety
PSPi v6 - Installing Lakka the easy way Make or Break Society 2023-11-16 | Welcome, Here is the Simpler version of Lakka for the PSPi v6 @othermodWhat you need:PSPi v6 Installed in the pspA way to read Micro SD cards on your computerMicro USB to USB adapterRaspberry Pi Imager: raspberrypi.com/softwareNext video will be on installing RetroPie stay tuned!Link Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety
PSPi v6 - Installing Lakka Make or Break Society 2023-11-05 | Welcome, here is the most voted install Lakka OS on the PSPi v6 by @othermodRecording This video inspired me to start compiling my own custom version of Lakka for the PSPi so the next video will likely be on that! What you need:PSPi v6 Installed in the pspA way to read Micro SD cards on your computerMicro USB to USB adapterRaspberry Pi Imager: raspberrypi.com/softwareFileZilla: filezilla-project.org/download.php?type=clientPutty: putty.orgThe Compiled version of Lakka will go up November 15th stay tuned!Link Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety
Upgrade a PSP with the PSPi v6. Part 2 Assembly Make or Break Society 2023-10-24 | We made it! Finally!!! Here is the video you've been waiting for. Installing the PSPi v6 from @othermod into the PSP shell The next video that goes up we will be installing RetroPie, Batocera or Lakka and setting up the drivers. Vote in the comments or suggest a different one!There is also a poll that you can vote for your favourite OSLink Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety
Prepping your PSP for the PSPi v6. Part 1 Cleaning Make or Break Society 2023-10-21 | This is my PSP cleaning video to prepare for the PSPi v6 from @othermod s://learn.adafruit.com/program-an-avr-or-arduino-using-raspberry-pi-gpio-pins/installationThe next video that goes up we will finally be installing the PSPi v6 into the PSP shellAfter that we will be installing RetroPie, Batocera or Lakka and setting up the drivers.I'll be putting up a Poll soon for what OS you want installed firstLink Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety
PSPi 6 firmware flashing Make or Break Society 2023-10-06 | This is my firmware flashing video for the main board of the PSPi v6 from @othermod You can find the .hex file from othermod's github page under atmega (link Tree bellow)AVRdude install instructionslearn.adafruit.com/program-an-avr-or-arduino-using-raspberry-pi-gpio-pins/installationFirmware flashing commands:sudo avrdude -p m8 -C ~/avrdude_gpio.conf -c pi_1sudo avrdude -p m8 -C ~/avrdude_gpio.conf -c pi_1 -U lfuse:w:0xE4:m -U hfuse:w:0xDC:msudo avrdude -p m8 -C ~/avrdude_gpio.conf -c pi_1 -e -U flash:w:/home/pi/atmega.ino.arduino_standard.hexThe next video that goes up we will be disassembling and clean our doner PSP, and installing the PSPi v6 if time permitsAfter that we will be installing RetroPie or Batocera and setting up the drivers.Link Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety
PSPi 6 Main board and headphone board assembly Make or Break Society 2023-09-27 | This is my soldering video for the Parts to assemble the PSPi v6 from @othermod The next video that goes up will be flashing the firmware to the board. In that video I will also be soldering a resistor for the headphone board. we will then diss assemble and clean our doner PSP.After that I will do a full Assembly video into a PSP using a completed PSPi board.Link Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety
PSPi 6 Parts unboxing Make or Break Society 2023-09-18 | This is my unboxing of the Parts to assemble the PSPi v6 from @othermod The next video that goes up will be the soldering of the board, my boards are prototypes and changes have already been made. I will be correcting some of the minor problems/differences in that video.After that I will do a full Assembly video into a PSP using a completed PSPi board.Link Trees:OtherMod: https://linktr.ee/othermodMoBS: https://linktr.ee/makeorbreaksociety
PlayStation Vita Video Recording? Make or Break Society 2022-11-24 | Thanks for checking out the MoBS! Consider supporting us on the following:Twitter: twitter.com/MoBS1337Patreon: patreon.com/MoBSwww: Under construction: www.rmobs.ca
No rush, Ill wait! Make or Break Society 2022-10-21 | So how long did it take you?Check out my Patreonpatreon.com/MoBS
All the PSPs Make or Break Society 2022-10-19 | Thanks for checking out the PSP collection. Find bellow the links to all the stuff I plan to use.1. PSP 1000 IPS Screen. kasynparts.com/product/psp-1000-ips-screen-mod-kit-ips-lcd-highlight-high-brightness2. PSP 2000 Clear blue shell. https://a.co/d/dO1dGrf3. PSP RGB LED mod. www.youtube.com/c/sjm43064. PSPi by OtherMOD othermod.com/product/pspi-zeroAll other parts will just be coming out of my spare parts binComment bellow and let me know what one you'd like to see first. I'll pin a comment with all the optionsCheck out my Patreon for early access to future videos!patreon.com/MoBS
PSP Quickie Make or Break Society 2022-10-14 | Just Showing Off the new clear blue shell that just came in the mail
Im back and getting serious! Make or Break Society 2022-09-23 | If you have any recommendations for cannel names and\or topic's put them in the comments!
Floppy Music 8 drives - Imperial March Make or Break Society 2017-06-19 | Newly finished Floppy music maker. still needs the polish to make it look good also need a name for it.Please help us name this music machine!
Christmas vape box mod Make or Break Society 2016-01-06 | This is a 2x 9800mAh Box Mod Wired in series. the 510 Connector is a fatdaddy and the button is for a boat =D
Danny W Lathams Rock And Roll Farewell Make or Break Society 2015-11-11 | We are having problems with the connection at the hall the stream will begin as soon as Youtube Receives enough data!
Floppy music 2 drives Make or Break Society 2015-09-09 | 2 Floppy disk drives first test. HEADPHONES RECOMMENDED it's very quiete
Home Built Bitcoin Point of Sale Terminal Make or Break Society 2014-08-08 | all the parts for this terminal can be bought at radio shack or at a combination of local hobby stores or from adafruit!here is a short parts list-Raspberry Pi model B-4GB SD Card-HD44780 2x16 chr LCD screen-3.2" LCD from a car reverse camera kit-Num pad-mono price mini wifi adapter-RCA cable-12v 500ma power adapter (for the LCD)-5v 1a-2.5a cellphone charger with usb port-usb micro b charge cablehere is the link to the software on githubgithub.com/WeMeetAgain/btcposIf you have any questions I'd be happy to answer them if i canPre-orders available at http://www.reginabitcoins.com/shop
How To: Galaxy S5 Screen Replacement Make or Break Society 2014-06-20 | How to do screen replacement for Samsung Galaxy S5.
How To: Ipad 4 Screen replacement Make or Break Society 2014-06-03 | Here is my how to video for changing a broken Ipad 4 digitizer
HOW TO: Galaxy S4 Screen Replacement Make or Break Society 2014-05-31 | How to do screen replacement for Samsung Galaxy S4. No heat gun required
CS 207 project demo day in CL112 Make or Break Society 2013-12-13 | Live Streaming even of The University of Regina CS 207 project demo day
HOW TO: Disable Gate Keeper on OSX 10.8, 10.9, or 10.10 Make or Break Society 2012-08-09 | This is my how to video for disabling Gate Keeper. on Mountain Lion Mavericks and Yosemite Gate Keeper is a new security program in OSX 10.8, 10.9, and 10.10 that only allows the install of verified software made either by apple or the developers that publish to the app store.Disabling this is very easy. I will show you 2 ways to do it the first is a one time install and the second is to permanently disable it.
HOW TO: Solder the Ultimate Useless Machine Guts Make or Break Society 2012-06-13 | Don't forget to use the like button and the share button! if you really like this vid and want more of the type hit that subscribe button. It's one of these I help you you help me things =)This is my how to video for soldering the mechanism inside the ultimate useless machine by frivolous engineering. this took me a total of 30 min and on a 1 to 10 difficulty scale it would be about a 4. I did at one point I did forget to put the heat shrink on so i edited in a spot in the middle of this video of where it goes. If you want to see more videos like this Subscribe and visit my blog at http://cur.lv/2x9p If you want your own Ultimate Useless machine they come in 2 models the kit $30 (needs to be soldered) and the some assembly required $50 (fully soldered) to get yours Visit http://cur.lv/2x9r
PSP Sound Reactive LED Mod how to Make or Break Society 2012-06-04 | A big thankyou to all the ppl at acidmods.com for they're help! They don't know they helped but they did!Don't forget to Like and Subscribe
PSP slim Sound Reactive LED Mod Make or Break Society 2012-06-04 | A big thankyou to all the people at acidmods.com for they're help (they don't know they helped but they did) also please remember that I know this has been done before, not only by me but also by others just thought I should post it.Don't Forget to Like and Subscribe!
External HDD for PS3 Make or Break Society 2012-06-04 | This video is a How to for formatting an external drives up to 2tb to work on a ps3Don't forget to Like and Subscribe****If anyone runs into the problem with Windows 7 forcing the fat32format.exe to have a file folder on C:\ before it would put the actual .exe file on the C:\ thus making the cmd not able to read it since it's C:\fat32format\fat32format.exe***To solve this, simply click and drag the fat32format.exe file and drag it straight to the C:\ drive, then follow vid.
GOW2 all 3 Über Chests Make or Break Society 2012-06-04 | This is My How-To For the God Of War 2 Uber chest PS3 trophy Hope you like it don't forget to Like and Subscribe.
Evacuation exercise At the UofR Make or Break Society 2012-06-01 | This is the Regina Fire department practicing there Evacuation procedures from the top of the North residence at the University of ReginaDon't forget to check my blog for updates on all up coming videos http://cur.lv/2x9p
HOW TO: Do a Clean install of Mac OSX 10.7, 10.8, 10.9, 10.10, And 10.11 Make or Break Society 2012-05-30 | This is my How To Video for installing Mac OSX 10.7 on a MBP early 2011 but this will work on any system that currently has Lion, Mountain Lion, Mavericks, Yosemite, or El Capitan on it.All you need to do this is a system that already has 10.7-10.10 on it because as part of your original install it created a recovery partition and that is what we will be using.REMEMBER TO BACKUP YOUR DATA! Following this tutorial will wipe your hard drive clean and you will loose all your data YOU HAVE BEEN WARNEDIF YOU GET "THE ITEM IS CURRENTLY UNAVAILABLE"The reason you get this message is YOUR apple id is not associated to an apple operating system. In the 4 choices you get click "GET HELP ONLINE" This opens Safari. Click icloud and sign in with your apple id. Now you can go back to installing screen and the downloading will finally work because you have now shown apple id you've logged in from your computer. DO Not use someone else's apple id. You'll get all their apps.
