BIQU BX - Octoprint compatible 3D printer on Kickstarter @TeachingTech

Teaching Tech A 3D printer with factory Octoprint integration and a touch screen interface? That’s what Bigtreetech is offering on Kickstarter with the BIQU BX. Should you back it? This video is an honest depiction of my experience testing not one, but two BX machines.

BIQU BX Kickstarter: kickstarter.com/projects/1440007055/biqu-bx-worlds-lightest-direct-extruder-fdm-3d-printer
OctoBTT GitHub: github.com/bigtreetech/OctoBTT
OctoDash GitHub: github.com/UnchartedBull/OctoDash
OctoDash is compatible with the BIQU BX. Burn your Octopi image, add your wifi details as normal, edit config.txt with the LCD settings from the bottom of the OctoBTT readme, then follow the OctoDash installation as usual.

These printers were provided free of charge by Bigtreetech for the purposes of testing and making this video. All opinions expressed are my own. Clearly, Bigtreetech sends printers like this to content creators to promote their product but I enjoyed the chance to test and give feedback. At times I was quite forthright with constructive criticism, but BTT were receptive as as a result the final product should be improved.

Some more thoughts:
-The first version was bug ridden and I couldn’t recommend it.
-The updated version was a clear step forward with all bugs fixed. I didn’t experience any issues on this version.
-Print quality is what you would hope. I will put the printer through some calibration to optimise it. If anything, the part cooling fan is the weak link, however the extruder design and breakout board will make this easy to upgrade if necessary.
-OctoBTT looks to be based on OctoDash. Both projects are open source, this is all above board. OctoBTT introduces some new features but is not yet polished. In time it should improve.
-OctoDash is quite polished and a great alternative solution. Check the GitHub wiki to see the options and themes available.
-Assuming the three issues I noted at the end of the video addressed, this would seem to be a really great printer. This is not a review however, my review process is a lot longer and more exhaustive.
-Kickstarter pledges do not guarantee a product, please read here: kickstarter.com/trust
-Watch as many videos about this as possible from other creators to get a broader picture

Models featured in this video:
Rubber ducky: thingiverse.com/thing:12224
Falcon clamp: myminifactory.com/object/3d-print-falcon-clamp-quick-print-106186
Baby Yoda: myminifactory.com/object/3d-print-baby-yoda-from-star-wars-support-free-figure-107462
Ender 3 webcam mount: thingiverse.com/thing:3147743
Ratchet clamp: myminifactory.com/object/3d-print-ratchet-clamp-print-in-place-89776

Information from viewer Alan:
"I sponsored this on Kickstarter and received my printer early February 2021. I was also intrigued with the HDMI connector for the hot end connections. After a number of successful prints (approx 25) of various benchies and calibration stuff, I attempted my first sizeable print .....about 14 hours. I have the unit in a thermal enclosure to minimize temperature variations. The print failed after 8 hours with thermal runaway messages. After a few tests to try and establish where the fault was, I swapped out the heater and thermistor for replacement ones and tried the print again. It failed again after 9 hours with the same error message. Having seen reviews about the qwerky use of an HDMI connector, I decided to run separate cables from the hot end pcb all the way to the control board. Problem solved!! I have done a number of lengthy prints (18-26 hours) and have had no failures. I can only conclude that the very small contacts and contact area on the HDMI is unsuitable for either the heater circuit or thermistor feedback. I did feed these findings back to BTT tech support for there information."

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

updated 3 years ago

BIQU BX - Octoprint compatible 3D printer on Kickstarter

Teaching Tech 2020-10-16 | A 3D printer with factory Octoprint integration and a touch screen interface? That’s what Bigtreetech is offering on Kickstarter with the BIQU BX. Should you back it? This video is an honest depiction of my experience testing not one, but two BX machines.

BIQU BX Kickstarter: kickstarter.com/projects/1440007055/biqu-bx-worlds-lightest-direct-extruder-fdm-3d-printer
OctoBTT GitHub: github.com/bigtreetech/OctoBTT
OctoDash GitHub: github.com/UnchartedBull/OctoDash
OctoDash is compatible with the BIQU BX. Burn your Octopi image, add your wifi details as normal, edit config.txt with the LCD settings from the bottom of the OctoBTT readme, then follow the OctoDash installation as usual.

These printers were provided free of charge by Bigtreetech for the purposes of testing and making this video. All opinions expressed are my own. Clearly, Bigtreetech sends printers like this to content creators to promote their product but I enjoyed the chance to test and give feedback. At times I was quite forthright with constructive criticism, but BTT were receptive as as a result the final product should be improved.

Some more thoughts:
-The first version was bug ridden and I couldn’t recommend it.
-The updated version was a clear step forward with all bugs fixed. I didn’t experience any issues on this version.
-Print quality is what you would hope. I will put the printer through some calibration to optimise it. If anything, the part cooling fan is the weak link, however the extruder design and breakout board will make this easy to upgrade if necessary.
-OctoBTT looks to be based on OctoDash. Both projects are open source, this is all above board. OctoBTT introduces some new features but is not yet polished. In time it should improve.
-OctoDash is quite polished and a great alternative solution. Check the GitHub wiki to see the options and themes available.
-Assuming the three issues I noted at the end of the video addressed, this would seem to be a really great printer. This is not a review however, my review process is a lot longer and more exhaustive.
-Kickstarter pledges do not guarantee a product, please read here: kickstarter.com/trust
-Watch as many videos about this as possible from other creators to get a broader picture

Models featured in this video:
Rubber ducky: thingiverse.com/thing:12224
Falcon clamp: myminifactory.com/object/3d-print-falcon-clamp-quick-print-106186
Baby Yoda: myminifactory.com/object/3d-print-baby-yoda-from-star-wars-support-free-figure-107462
Ender 3 webcam mount: thingiverse.com/thing:3147743
Ratchet clamp: myminifactory.com/object/3d-print-ratchet-clamp-print-in-place-89776

Information from viewer Alan:
"I sponsored this on Kickstarter and received my printer early February 2021. I was also intrigued with the HDMI connector for the hot end connections. After a number of successful prints (approx 25) of various benchies and calibration stuff, I attempted my first sizeable print .....about 14 hours. I have the unit in a thermal enclosure to minimize temperature variations. The print failed after 8 hours with thermal runaway messages. After a few tests to try and establish where the fault was, I swapped out the heater and thermistor for replacement ones and tried the print again. It failed again after 9 hours with the same error message. Having seen reviews about the qwerky use of an HDMI connector, I decided to run separate cables from the hot end pcb all the way to the control board. Problem solved!! I have done a number of lengthy prints (18-26 hours) and have had no failures. I can only conclude that the very small contacts and contact area on the HDMI is unsuitable for either the heater circuit or thermistor feedback. I did feed these findings back to BTT tech support for there information."

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Can Bambu Lab 3D printers be repaired? - 3D print mythbusting

Teaching Tech 2024-05-17 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

I’ve seen people complain in the comments that new age 3D printers like those from Bambu Lab are hard to work on, with components hidden in hard to reach areas. In short, these machines are not designed for disassembly and reparability in mind. In this video, I undertake a series of fixes in Bambu Lab printers and compare the process to more traditional designs.

Thanks to Kevin E for requesting part of this video.

0:00 Introduction

0:49 Bambu Lab technical support and th scope of this video
Main Bambu Lab support page: bambulab.com/en/support
Bambu Lab wiki: wiki.bambulab.com/en/home

1:13 A1 bed replacement after recall
Recall blog post: blog.bambulab.com/a1-recall-update
Retrofit guide wiki: wiki.bambulab.com/en/a1/maintenance/heatbed

4:33 A1 (mini) cooling fan replacement
Fan change guide: wiki.bambulab.com/en/a1-mini/maintenance/part-cooling-fan

8:03 A1 test print
Dragon scale fabric by ftobler: printables.com/model/851001-dragon-scale-fabric

8:34 X1/P1 part cooling fan swap

9:55 X1/P1 hot end/nozzle swap

12:11 AMS (lite) filament breakage

13:38 X1/P1 belt tensioning
Wiki article: wiki.bambulab.com/en/x1/maintenance/belt-tension
Patrick’s tensioning tools: printables.com/model/459456-bambu-lab-printer-x-y-squareness-check-adapters

14:42 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

The 3D printers the community actually want: Your say in 2024

Teaching Tech 2024-05-10 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Recently, I put out a community post inviting the 3D printing community to have their say on the state of 3D printing. This was a follow up to an influential survey from three years ago. In this video, we examine what the community likes and dislikes, their priorities, and propose a new 3D printer that aims to meet their needs.

Thanks to everyone who took the time to respond!

0:00 Introduction
Previous survey video: youtu.be/4dYStVwTfFE

0:51 The impact of the first survey video

2:06 The new survey and format

2:36 Section 1: General snapshot

4:57 Section 2: Consumer Interests
Non-planar printing video: youtu.be/cbhWni9f980
My belt bed converted delta: youtu.be/hgTfSCgL0L0

12:35 Section 3: Other stuff

14:10 The craziest/funniest ideas

15:00 Summary of survey response

15:37 A proposed 3D printer I think would be popular

16:21 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Making a cheap, open source 3D space mouse with Arduino and 3D printing *V2 out*

Teaching Tech 2024-05-03 | Please take my 3D printing survey: docs.google.com/forms/d/e/1FAIpQLScLdZ1f56dygzCpS1spAEFAlMpM195eg-mkkUoCHunfhutQrA/viewform

At times this project was fun, and other times it was hell. Ultimately, by building on the fantastic work of others, we have an emulated Spacemouse that can be made for $20 of parts, thanks to Arduino and 3D printing. My version is a little bigger than I expected, so maybe a V2 is on the cards.

Thanks to Shiura and all of the other contributors to this great project.

My Spacemouse remix on Printables. V2 is out and much smaller: printables.com/model/864950-open-source-spacemouse-space-mushroom-remix

0:00 Introduction

0:55 What is a space mouse?
3DConnexion SpaceMouse: 3dconnexion.com/au/spacemouse
3DConnexion video: youtube.com/watch?v=-CB0D-z47yE

1:39 Available DIY options
OS3M by Colton Baldridge: hackaday.io/project/187172-os3m-mouse
Orbium by FaqTotum: printables.com/model/132522-orbion-3d-space-mouse-diy
Space Mushroom by shiura: printables.com/model/353764-space-mushroom-full-6-dofs-space-mouse

2:46 My frustrating journey
Thingiverse comments: thingiverse.com/thing:5739462/comments
Instructables page: instructables.com/Space-Mushroom-Full-6-DOFs-Controller-for-CAD-Appl
4 joystick remix by fdmakara: thingiverse.com/thing:5817728
UFO style remix by 3dtombud: printables.com/model/749446-space-mushroom-remix-ufo-style-knob-with-led-light

5:29 My final version

6:09 Required hardware

6:43 Printed parts

7:26 Core assembly

8:20 Wiring
Crimping guide video: youtu.be/GZOh1NzqzzU

9:39 Preparing a custom Arduino board to emulate a SpaceMouse

10:41 Arduino sketch uploading and debugging

13:23 Remaining assembly

15:28 Usage and evaluation

16:29 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Conditional PID tuning for maximum hot end stability - Is it worth it?

Teaching Tech 2024-04-26 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

I personally only tune my hot end PID for a single temperature wit the part cooling fan at 100%. But perhaps a lot more accuracy and stability can be found with conditional PID tuning. In this video, I take you through what PID is, how to tune it, and how to tube it for various scenarios and apply the, in the slicer. In theory this is superior, but in practise the effort may not be worth the meagre returns. What do you think?

Thanks to Bob Sissan for the request.

0:00 Introduction

0:42 What is PID control?
PID control wiki: en.wikipedia.org/wiki/Proportional%E2%80%93integral%E2%80%93derivative_controller
Bang bang control wiki: en.wikipedia.org/wiki/Bang%E2%80%93bang_control

2:57 What happens if the PID values are incorrect?

3:29 How to autotune PID?
PID autotune video: youtu.be/qCtL0Yd_w0I
PID autotune written guide: teachingtechyt.github.io/calibration.html#pid
Marlin M303 gcode: marlinfw.org/docs/gcode/M303.html
Klipper PID autotune documentation: klipper3d.org/Config_checks.html?h=pid#calibrate-pid-settings

5:00 Bob’s question - Scenarios for PID tuning

7:18 Tuning for multiple scenarios
Marlin M106 reference: marlinfw.org/docs/gcode/M106.html
Klipper M106 reference: klipper3d.org/G-Codes.html#g-code-commands

7:55 Setting PID values on the fly
Marlin set PID M301 gcode: marlinfw.org/docs/gcode/M301.html
Klipper feature request: github.com/Klipper3d/klipper/issues/1167
Closed Klipper pull request: github.com/Klipper3d/klipper/pull/2507

8:37 Setting PID settings per material

9:31 Setting PID for no fan vs fan
Pastebin with conditional gcode: pastebin.com/0yE0yJHn

12:24 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Non-planar 3D printing in a modern slicer thanks to the community

Teaching Tech 2024-04-19 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Non-planar 3D printing is truly mesmerising to watch, and for the right type of model, vastly improves the appearance and surface quality. Thanks to the community, this feature is now available in a recent version of PrusaSlicer. In this video, I take you through the journey, the quirks, and the potential of non-planar 3D printing.

Hopefully this code can be ported into other slicers and developed even further. Even in its current experimental form it’s still worth having.

Try it now on Windows (and hopefully others soon): github.com/teachingtechYT/PrusaSlicer/releases

0:00 Introduction
2024 mysteries video: youtu.be/SeKjtBH2K_c

0:43 What is non-planar 3D printing?
Daniel Ahlers’ master thesis: https://tams.informatik.uni-hamburg.de/publications/2018/MSc_Daniel_Ahlers.pdf
Previous non-planar video: youtu.be/gmePlcU0TRw

2:03 PrusaSlicer 2.6 fork by EiNSTeiN-
GitHub: github.com/EiNSTeiN-/PrusaSlicer

2:21 Trying to build PrusaSlicer from source
Thank you psiberfunk!

3:33 Running non-planar PrusaSlicer 2.6 and inputting parameters

4:50 Airbrush nozzle adaptors are a double edged sword
Aliexpress (affiliate link): https://s.click.aliexpress.com/e/_DeyPD8d

6:42 Finding a solution for ABL
Marlin M0/M1: marlinfw.org/docs/gcode/M000-M001.html
Euclid ABL probe: youtu.be/egWpvaTsl10

8:31 Slicer settings/tips

9:26 Slicing speed and bugs

11:15 Results with suitable models

12:23 What needs to be improved

13:23 Conclusion

Models featured in this video:
My testing models: printables.com/model/848822-non-planar-3d-printing-test-models
3DBenchy by Creative Tools: 3dbenchy.com
Stable glider by JoeRixon: printables.com/model/420107-stable-glider-v7a-notch-for-rubber-band-launch-35m
Lego Helmet by F2Beamer: printables.com/model/285207-lego-helmet

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Carvera Air - Smaller, cheaper, but still smart and capable

Teaching Tech 2024-04-12 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Makera previously launched the Carvera desktop CNC, to much acclaim. Unfortunately, the machine was too expensive for many. In response, Makera now has the Carvera Air, a cheaper version that still retains many smart features. In this video, I test it out to determine the strengths and weaknesses, to let you make an informed decision.

This machine was provided to me free of charge by Makera for the purposes of making this video. All opinions expressed are my own. The machine will be donated to a local school where I am certain it will do a fantastic job.

0:00 Introduction

0:47 CNC router options
6040 on Aliexpress: aliexpress.com/item/1005006411234283.html
3018 on Amazon: amazon.com/SainSmart-Genmitsu-3018-PROVer-Switches-Emergency-Stop/dp/B07ZFD6SKP
Nomad 3: shop.carbide3d.com/products/nomad-3?variant=32912906321981
Carvera Kickstarter video: youtu.be/ID0-gpGaZGM
Carvera production video: youtu.be/cvuRap88jYk

2:19 Carvera Air
Kickstarter page: kickstarter.com/projects/makera-inc/carvera-air?ref=2yz5uy
Information page: makera.com/pages/carvera-air
Review policy: teachingtechyt.github.io/reviewpolicy.html

3:13 Unboxing and setup

5:47 Working through example projects

10:11 Laser module

11:14 4th axis module

12:26 CAM options
Software page: wiki.makera.com/en/software
Kiri:Moto: https://grid.space/kiri/

12:58 Aluminium parts
Injection molding video: youtu.be/upEUjsd5uGE

14:14 Carbon fiber gears
Backyard automation video: youtu.be/Hz5E83ftKio

15:24 Trying Makera CAM beta
Makera CAM instructional video: youtube.com/watch?v=yIMAdBEokKU

16:38 Summary
Kickstarter video with Makers Muse: youtu.be/Cxij29vpSgs

18:40 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

PET bottle to 3D printing filament - A complete solution from Tylman Design

Teaching Tech 2024-04-05 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

There are more and more recycling options available for DIYers to use with 3D printing. In this video, I test a range of products from Tylman Design. They include the PETmachine (PET strip to PET filament) and PETwelder + Mr Winder (filament joining and winding). Although a certain investment is needed to get going, these products and the process itself can be very effective.

Both kits were provided free of charge by Tylman Design for the purposes of me making this video. All opinions expressed are my own. teachingtechyt.github.io/reviewpolicy.html

0:00 Introduction
Recycling playlist: youtube.com/playlist?list=PLGqRUdq5ULsNGyT4mBd51XTWo2GVE7MBt
CNC Kitchen video: youtube.com/watch?v=1yIe1Pp_Nrg

0:59 Tylman Design
Website: tylmandesign.com
Etsy store: etsy.com/shop/TylmanDesign

2:08 Building the PETmachine kit

5:45 The pultrusion process

6:20 Preparing bottles

7:30 Cutting PET strips

8:54 Using the PETmachine to pultrude filament

10:20 Printing PET filament

11:45 Building the PETwelder and Mr Winder

13:03 Joining PET

14:02 Joining PLA

14:29 Further printing

15:07 Is it worth it?

17:06 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Home injection molding part 3: Making stuff! (kind of..)

Teaching Tech 2024-03-29 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

It’s time for some home based injection molding. I’ve had this machine since 2014, but it has been sitting idle for a while now, due to an error on my part. Previously, I attempted to mold some bespoke silicone washers to seal the machine, and did manage to mill a two part aluminium mold ready for recycled plastic. In this video, I make some further repairs and alterations and finally put through some shredded PLA with frustrating results. Is it worth more modifications and testing? At the moment, I think not.

Please note that this machine is sold to suit 110V mains voltage. In Australia we use 220V, and I’m pretty sure I removed one heater and converted the other. If you also use 220V, you would need to do the same or use a step down converter. It’s also worth noting that this machine was never intended to be used with this type of plastic. If I were to stick to the original Plastisol material, it would likely have been flawless.

0:00 Introduction

0:42 Recap
Part 1: youtu.be/4BRNVmtP7Rs
Part 2: youtu.be/aHfsrhAptL0

2:09 Silicone o-rings (again)

2:50 New PID controller (with autotune!)
My new controller from eBay: https://www.ebay.com.au/itm/304598395639

3:47 Additional chamber heater

4:13 Hose repair

4:28 The compressor gives up

4:42 Machine modification to use a plunger mechanism

6:54 PLA tests and (poor) results
PLA injection molding guidelines: totalenergies-corbion.com/media/ny1kwp02/processing-guide-injection-molding-of-standard-and-high-heat-pla-compounds-20220722.pdf

10:02 Virgin ABS (worse) results

11:10 Hot glue test
CNC Kitchenm hot melt glue filament video: youtube.com/watch?v=alwsRqh5W8M

12:10 Evaluation
Recycled plastic sheets video: youtu.be/0VibXPtIcxc
Industrial injection molding video: youtube.com/watch?v=clxpCnZZk60
Buster Beagle 3D: busterbeagle3d.com

13:25 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

How to install X1Plus community firmware - Step by step guide

Teaching Tech 2024-03-22 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

X1Plus community firmware for the Bambu Lab X1 series is out! Here is a concise, to the point video taking your through prerequisites, installation, features, and updating.

Thanks to the X1Plus team for all of their efforts, as well as Bambu Lab for allowing their customers a choice.

0:00 Introduction
3D Printing Nerd stream: youtube.com/watch?v=VNu_sEcyQk0

0:37 What is X1Plus?
Previous video: youtu.be/Oio2ibz7rMw
X1Plus GitHub: github.com/x1plus/x1plus
X1Plus wiki: github.com/X1Plus/X1Plus/wiki

1:38 Prerequisites

2:10 The Bambu Lab third party firmware plan
Document to agree to: bambulab.com/en-us/third-party-firmware/plan
Bambu Lab warranty: bambulab.com/en-us/policies/warranty

4:20 Downgrading to firmware R with Bambu Handy

5:18 Rooting the printer

5:52 Running the X1Plus installer

7:45 Brief X1Plus tour and user manual
User manual: github.com/X1Plus/X1Plus/wiki/User-Manual

9:21 Boot menu and update process

10:23 Conclusion
Bambu Lab blog: blog.bambulab.com

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Magneto X linear motors: Deep dive and performance testing

Teaching Tech 2024-03-15 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

After my first Magneto X video, many viewers had questions and requests regarding the linear motors. In this video, we take a detailed look at how they work, what each electronics component does, and stress test across a range of areas to see if linear motors are a worthwhile advancement for 3D printing, or just a gimmick.

Thanks to all of the people who asked questions in the first video, and to the Peopoly engineers who then answered my questions.

This 3D printer was sent to me free of charge by Peopoly, so I could provide feedback and suggest improvements for production models. There was originally no request to produce any videos about the Magneto X. After the first video, many viewers requested more information on the linear motors, prompting this follow up. All opinions expressed are my own.

0:00 Introduction
First Magneto X testing video: youtu.be/seIFIgBlKvM

0:47 What are linear motors?
Linear motor explainer by Lesics: youtube.com/watch?v=uf_Z57gAJTc

2:48 How are these controlled by Klipper?

3:18 Electronics deep dive

5:39 Compatibility with input shaping
Klipper input shaping guide: youtu.be/EJapxNsntsQ

6:35 Updates and calibration

7:44 Are linear motors worth it?
ANCA Linear motor CNC: machines.anca.com/Products/Machines/FX3-Linear
Magneto X store page: peopoly.net/products/magneto-x

8:31 Volume

9:03 Repeatability

9:34 VFAs and reliability
Patrick's Bambu Lab belt tensioning tools: printables.com/model/459456-bambu-lab-printer-x-y-squareness-check-adapters

11:03 Accuracy and skew - CaliFlower calibration test
Vector3D CaliFlower: https://vector3d.shop/products/califlower-calibration

12:09 Closed loop correction and speed/acceleration testing
Ellis3DP page: ellis3dp.com/Print-Tuning-Guide/articles/determining_max_speeds_accels.html

15:44 Temperature concerns with an enclosure

17:20 Opportunity for separate linear motor projects

Conclusion
Peopoly blog: peopoly.net/blogs/news/march-2024-magneto-x-production-and-product-update

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

I’m (mostly) happy with my Prusa XL - This is what it took

Teaching Tech 2024-03-08 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

The launch of the Prusa XL was delayed and problematic. My own difficulties were documented in a previous video. I’ve now modified and upgraded the printer to the latest spec, and thankfully it is now working much better. In this video, I take you through the process and identify where the XL excels and struggles versus the competition.

Thanks very much to Shane for his patience and support.

This printer was purchased with my own money. All opinions expressed are my own.

Prusa XL: prusa3d.com/product/original-prusa-xl-3d-printer

0:00 Introduction

0:39 Recapping the state of the printer
Initial testing: youtu.be/C1a2c-qeTQw
Non-alpha firmware test: youtu.be/bVY3S22L4EY
XL slicer update: youtu.be/t78T0_qSrZM

1:51 Updates from Prusa
Prusa Buddy board gcode: help.prusa3d.com/article/buddy-firmware-specific-g-code-commands_633112
Product page with updated specs: prusa3d.com/en/product/original-prusa-xl-3d-printer-3
0.4mm nozzles: prusa3d.com/en/product/prusa-nozzle-brass-0-4-mm

3:01 Contact with Prusa
1440 Makers channel: youtube.com/@1440Makers

3:45 Filament dryness
No prime tower multi-material video: youtube.com/watch?v=tLEP2anAs_A

4:47 Changes and modifications
Prusa XL fan shroud by Livius: printables.com/model/622164-prusa-xl-fan-shroud
Cooling fan torture test: printables.com/model/180150-cooling-fan-test-torture-test
0.4mm nozzles: prusa3d.com/en/product/prusa-nozzle-brass-0-4-mm
Nozzle changing guide: help.prusa3d.com/guide/how-to-replace-the-prusa-nozzle-xl-multi-tool_506481
Prusa XL printable parts: printables.com/model/449554-xl-printable-parts
Lubricating pins: help.prusa3d.com/guide/how-to-lubricate-the-coupler-pins-on-original-prusa-xl-multi-tool_636777
I also printed this front nozzle scrubber but I might not need it anymore:
printables.com/model/644817-prusa-xl-series-front-nozzle-scrubber-including-g-

8:56 Print results
3DBenchy: 3dbenchy.com
Part cooling torture test:
Mandalorian bust by iczfirz: printables.com/model/215422-mandalorian-bust-multicolor-for-mmu-ercf-palette
Marlin multi material remix by Cipis: printables.com/model/5480-marlin-multi-material
Boxing gloves by Mosaic Manufacturing: thingiverse.com/thing:3469545
Miami Heat lightbox by Geek Genius Collective: makerworld.com/en/models/94459#profileId-101075
Reducing AMS waste video: youtu.be/p3ZIM3megIU
4D Printing video: youtu.be/yNZ2mqYNLYI

12:36 Octoprint and webcam
Octoprint setup guide: help.prusa3d.com/guide/octoprint-setup-on-mk4-mk3-9-mk3-5-xl_646395
Prusa XL Magnetic Camera Mount remix by Breit Ideas Incorporated: printables.com/model/789736-prusa-xl-magnetic-camera-mount-with-tripod-screw-h
3030 Cable Clip (Profile Cover) by bequ3: printables.com/model/216287-3030-cable-clip-profile-cover
Octoremote app: play.google.com/store/apps/details?id=com.kabacon.octoremote&hl=en&gl=US

13:39 Newest alpha firmware
Firmware download: github.com/prusa3d/Prusa-Firmware-Buddy/releases/tag/v6.0.0-alpha

14:22 Would I recommend the XL to others?
Dropped toolhead video: youtube.com/watch?v=PJiaBGvqNqQ
Prusa XL announcement blog: blog.prusa3d.com/original-prusa-xl-first-look_58312

16:24 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Eliminate seams in your 3D prints with scarf joint seams - An exciting development!

Teaching Tech 2024-03-01 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Soon, the visible seam on 3D printed parts will be greatly diminished, thanks to a new development called scarf seams. In this video, I shine a spotlight on the work of the developers, as well as the work of the community in testing to make sure it works. All the details you need to test yourself are included, plus my own testing results across a range of 3D printers.

0:00 Introduction

0:49 Scarf seam origins
GitHub pull request: github.com/SoftFever/OrcaSlicer/pull/3839

1:55 What is a scarf seam/joint and why is it needed?
Scarf joint wiki: en.wikipedia.org/wiki/Scarf_joint

4:07 How to test this yourself before it is officially released
A huge thanks to the X1Plus team for telling me about this and also assisting me in downloading the pre-release version. x1plus.net
My previous X1Plus video: youtu.be/Oio2ibz7rMw

6:44 Designing a seam testing model
My model free and open source on Printables: printables.com/model/784633-scarf-seam-test-model

7:46 Collaborating with psiberfunk
Orca Slicer guide to scarf seams by Adam L: printables.com/model/783313-better-seams-an-orca-slicer-guide-to-using-scarf-s

8:57 My results on various printers

10:55 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Can FOSS CAD compete? Trying out Ondsel (improved FreeCAD)

Teaching Tech 2024-02-23 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

I prefer to use free and open source options when I can, but when it comes to CAD I use the free but proprietary Onshape. I’ve previously tried but didn’t enjoy FreeCAD, but now we have Ondsel, an improved version that fixes problems and addresses community requests.

In this video, I compare Ondsel to FreeCAD, Onshape and even Fusion360 (this is the most I’ve ever used it). Trying to separate frustrations from being unfamiliar, I make a list of what works well, what is limited, and what still needs to be improved.

I really despise pointing out flaws in something free and open source, but I’ve tried to do so constructively, providing specific examples where these limitations are a problem. I’m sure some FreeCAd advocates will be upset over my conclusion, but the way it and Ondsel approach 3D modelling is quite different from Onshape/Fusion360/Inventor/Solidworks/SolidEdge/etc. They have converged on an intuitive and logical approach. FreeCAD/Ondsel deviates from this, but is it an improvement or hindrance?

Thanks to my patrons Derek and Novaplusplus for their assistance in making this video.

0:00 Introduction

0:47 Ondsel
FreeCAD: freecad.org
Ondsel: ondsel.com

1:44 Download and installation

2:02 Simple reference shape in Onshape

2:42 Comparison in Ondsel, FreeCAD and Fusion360

5:59 Temporary inconveniences vs actual limitations

6:45 Missing constraints and editing sketches

7:40 Only one shape/feature per sketch

10:38 Manual management of bodies

11:51 No timeline

12:56 Topological naming problem

13:30 The value of open source vs productivity
Scales image by Clker-Free-Vector-Images: commons.wikimedia.org/wiki/File:Balance_scales_symbol.svg

14:20 Ondsel improvements over FreeCAD

14:49 Ondsel wishlist

15:59 Conclusion
Onshape CAD series: youtube.com/playlist?list=PLGqRUdq5ULsONnjEEPeBxxStEsobDKAtV

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Field testing the Peopoly Magneto X linear motor 3D printer

Teaching Tech 2024-02-16 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

The Magneto X was announced in 2023 to much interest, due to its large build volume and innovative linear motor system. Importantly, all of the software was open source. When Peopoly offer me the chance to be part of the field testing team, I jumped at the chance to try and improve the product for eventual customers.

I know that some of the changes I made have definitely been included in the production printers, but I’m not sure if everything has. Fortunately, because it’s easy to alter things to your taste, users can easily replicate any changes that were not. I’m not sure who else was part of the test team, but I’m sure the improvements were a collaborative effort.

This 3D printer was sent to me free of charge by Peopoly, so I could provide feedback and suggest improvements for production models. There was originally no request to produce any videos about the Magneto X, but Peopoly did not object when I described this video. All opinions expressed are my own.

0:00 Introduction

0:40 What is the Peopoly MagnetoX?
3D Printing Nerd video: youtube.com/watch?v=9YaW8DIxWTc
Peopoly Official Channel: youtube.com/@peopoly

2:33 My arrangement with this printer

2:57 Packaging and unboxing

4:06 Detailed hardware inspection
Linear motor explainer by Lesics: youtube.com/watch?v=uf_Z57gAJTc

7:39 Frequently refined macros

8:13 Addressing idle noise
Reddit thread on fan configuration: reddit.com/r/klippers/comments/wwuewg/configuring_a_fan

9:55 Implementing KAMP
KAMP GitHub: github.com/kyleisah/Klipper-Adaptive-Meshing-Purging

10:56 Upgraded load cell

11:46 Test prints
3Dbenchy: 3dbenchy.com
Modern wavy vase: printables.com/model/680360-modern-wavy-vase
TPU dog/cat treat dispenser: printables.com/model/339694-tpu-dogcat-treat-dispenser

12:19 What’s next?
My review policy: teachingtechyt.github.io/reviewpolicy.html

13:00 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

BTT Panda Touch - Convenient and Powerful, but with potential future issues

Teaching Tech 2024-02-09 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

The Bigtreetech Panda Touch is an add-on accessory for Bambu Lab printers, although it is best suited to the P1 series. With very fast installation and setup, you will add a Bambu Lab style UI as an alternative to the P1 series interface, as well as other features like portability thanks to an inbuilt battery. Perhaps most importantly, it offers control of print farms by allowing you to send commands and start print jobs on multiple machines at once.

In this video, we cover unboxing, installation, setup and functionality. All is currently well, but there are some other considerations you should include before purchasing.

This product has been provided to me free of charge by BTT for the purpose of making this video. All opinions are my own. It has been tested in accordance with my review policy: teachingtechyt.github.io/reviewpolicy.html

0:00 Introduction
Xtouch video: youtu.be/7Av64TRznlI

0:48 A1 series recall
Blog post: blog.bambulab.com/a1-recall-update

1:20 What is the Panda Touch?
Biqu page: https://biqu.equipment/products/bigtreetech-panda-touch-5-display-for-bambu-lab-printers
Aliexpress page (affiliate): https://s.click.aliexpress.com/e/_DnsZZKZ

2:20 Unboxing

2:55 Installation and setup
Manual/wiki: bttwiki.com/PandaTouch.html

4:55 Interface tour

6:18 Multiple printers - Master vs Slave vs Sync vs Disconnect

9:01 Cordless/battery mode

9:48 Starting prints

11:31 Future changes and threats
BTT video: youtube.com/watch?v=UVujRmmHbyU
MQTT wiki: en.wikipedia.org/wiki/MQTT
KYD Klipper video: youtu.be/R3o0MGYW1ZU
Bambu Lab E3D collaboration blog post: blog.bambulab.com/bambulab_e3d
Bambu Lab X1plus and 3rd party API blog post: blog.bambulab.com/rooted-the-good-the-bad-and-freedom-of-choice

14:00 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Automated and easy 3D scanning with OpenScan Mini - Guide and test

Teaching Tech 2024-02-02 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

UDPATE: Article from OpenScan addressing the discussion in the comments about whether or not this is Open Source: https://www.openscan.eu/post/is-openscan-an-open-source-project

A 3D scanning photogrammetry rig that automates image capture and post processing, for free, and open source! It sounds too good to be true, but based on my testing it’s not. After you purchase the hardware kit, everything is free.

I’m not a patient person when it comes to prep for painting or 3D scanning, so the fact that my results were impressive tells you that this product is easy to use for almost everyone.

Most of this hardware was provided free of charge by OpenScan for the purpose of making this video. It was tested in accordance with my review policy. All opinions expressed are my own. teachingtechyt.github.io/reviewpolicy.html
I was so impressed by OpenScan, I made a donation here: buymeacoffee.com/openscan

0:00 Introduction

0:50 Types of 3D scanning
3D scanning comparison video: youtu.be/n-qqaW-yjis

1:48 What is the OpenScan Mini?
OpenScan website: https://en.openscan.eu/
OpenScan GitHub: github.com/OpenScan-org
OpenScan documentation: openscan-org.github.io/OpenScan-Doc

3:02 Hardware purchasing options and unboxing

4:28 Firmware preparation

5:14 Printed parts

6:09 Assembly

6:39 First run and tour

7:42 How to achieve best results
OpenScan photogrammetry guide: openscan-org.github.io/OpenScan-Doc/photogrammetry/basics
AESUB Blue 3D scanning spray: https://core-electronics.com.au/aesub-blue-disappearing-scanning-spray.html

9:55 3D scanning workflow
Meshmixer: meshmixer.com
Meshmixer 3D scan clean up tutorial: youtu.be/i5e2S8o7Ujc

13:11 Other 3D scan results

15:37 Strengths and weaknesses
OpenScan Patreon: patreon.com/OpenScan

18:04 Conclusion

Models scanned in this video:
3DBenchy - 3dbenchy.com
Orc chief bust - myminifactory.com/object/3d-print-orc-chief-nakhbruh-118659
Nature's Wrath - Genir Ancients Bundle - myminifactory.com/object/3d-print-nature-s-wrath-genir-ancients-bundle-215848
Teaching Tech Makercoin - printables.com/model/180155-super-satisfying-two-part-maker-coin

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

A 3D printing game? 3D PrintMaster Simulator review

Teaching Tech 2024-01-26 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

If you like 3D printing, why not enjoy it in a video game? In this video, I test 3D PrintMaster Simulator on Steam, a 3D print farm management video game. It promises building, upgrading and maintaining 3D printers, and using them to create customer jobs on command. The reality is a game full of potential that falls short on execution, so I’ve tried to provide some constructive feedback and suggestions to take the game forward.

I originally received a code free of charge to test this game from the developer. However, I also purchased a copy and gifted it to my nephew on Steam. My total gameplay was just over three hours.

0:00 Introduction

0:53 What is 3D PrintMaster Simulator?
Steam page: store.steampowered.com/app/2427000/3D_PrintMaster_Simulator_Printer

1:30 Control woes

2:14 Building my first 3D printer

5:35 Completing first orders

7:21 Buying and repairing a 2nd hand 3D printer

8:20 Upgrading

8:58 Early repetitious grind

10:48 Creative mode

10:59 Bugs and problems

12:07 Positives and suggested improvements

15:16 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Cheap and easy Klipper touch interface with CYD Klipper

Teaching Tech 2024-01-19 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Klipper has grown much more popular, and with that we receive more and more options from developers. In this video, we test CYD Klipper, a simpler alternative to KlipperScreen that can be setup very easily and for little cost. Hopefully it is a viable and affordable option for the Klipper community.

0:00 Introduction

0:42 Existing Klipper interface options
KlipperScreen guide: youtu.be/gYP2j-dUrBY

2:29 CYD Klipper
GitHub: github.com/suchmememanyskill/CYD-Klipper
Xtouch guide: youtu.be/7Av64TRznlI

3:01 Required hardware
CYD purchase links: github.com/witnessmenow/ESP32-Cheap-Yellow-Display#where-to-buy

4:08 Installation
CH340 driver installation guide: learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all

6:06 Designing an enclosure
SuperRacer belt conversion video: youtu.be/hgTfSCgL0L0
My enclosure on Printables: printables.com/model/725071-cyd-cheap-yellow-display-generic-enclosure

9:13 Features and operation

10:09 Macros

11:26 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Six incredible 3D printed projects for fun and discovery

Teaching Tech 2024-01-12 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

3D printings are becoming easier to use and capable of better results, so why not use them to create amazing projects. In this video, I showcase six hand selected projects primarily made with a 3D printer. I advise on how hard they are to print, assembly difficulty, hardware required and educational value.

All of these projects were worthwhile and satisfying, so thank you to the creators who released them free of charge. Also, a big thanks to my kids for their help, especially my daughter, who has all the hallmarks of a budding maker.

0:00 Introduction

1:01 Balance game by janlegaard
Thingiverse: thingiverse.com/thing:6335124

2:38 Mobile Exo-Suit by Jajaum3d
Printables: printables.com/en/model/500210-mobile-exo-suit

4:23 Dummy 13 by soozafone
Printables: printables.com/model/593185-dummy-13-printable-jointed-figure-beta-files
Assembly video: youtube.com/watch?v=Rwu3UP0cHZw
Lucky 13 butt remix by Pedro Lopes: printables.com/model/350151-lucky-13-butt

7:07 Toroidal Launcher by Brent Peterson
Makerworld: makerworld.com/en/models/93385#profileId-99949

9:08 Animatronic puppet face by James Bruton
YouTube: youtube.com/watch?v=jsXolwJskKM
Face GitHub: github.com/XRobots/ServoSmoothing
Remote GitHub: github.com/XRobots/openDogV3
3 axis joysticks (Aus): https://core-electronics.com.au/3-axis-joystick-with-button.html
Arduino Uno shield: https://www.jaycar.com.au/duinotech-arduino-compatible-prototyping-shield/p/XC4482
My remixed controller part, prepared 3MF and Arduino code: printables.com/model/717165-twin-joystick-arduino-uno-controller-remix

14:01 Hand crank generator by Tom Stanton
YouTube: youtube.com/watch?v=tb3iN4m9Bik
Printables: printables.com/model/658157-hand-crank-generator
Serpentine stator remix: printables.com/model/712255-serpentine-coil-stator
My remixed winder part: printables.com/model/717249-hex-drill-adaptor-for-generator-coil-winding
0.63mm enamelled wire: https://www.jaycar.com.au/0-63mm-enamel-copper-wire-spool/p/WW4018

19:33 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

X1plus community Bambu Lab firmware - A win for everyone?

Teaching Tech 2024-01-05 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

UPDATE: Dr Tao has spoken with X1plus and users will be have a choice of firmware: blog.bambulab.com/rooted-the-good-the-bad-and-freedom-of-choice

Firmware for the Bambu Lab X1 3D printer has been reverse engineered, with a community version available in X1plus. In this video, I take you through every aspect in detail so you can decide if you would like to try it. Even if you don’t we explore how having a community variant of the firmware will drive new features, like we already have with OrcaSlicer and Bambu Studio.

In preparing this video I have been as diligent as possible, testing the firmware by printing absolutely everything I could on it. This amount to around 40 hours of printing using various filaments and slicers. I spoke extensively with X1plus devs, and even discussed this firmware directly with Bambu Lab CEO Dr Tao.

This video was checked for technical accuracy by the X1plus team before publishing. There are so many baseless accusations out there that it was important to ensure this video was factual. All information is accurate to the best of my knowledge in accordance with the X1plus team findings.

What will happen next? Let me know what you think in the comments.

X1plus firmware: x1plus.net

0:00 Introduction

0:52 What is X1plus?

1:25 Who is behind X1plus?

2:04 How does X1plus work?

3:56 How is X1plus installed?

4:56 X1plus benefits

6:35 X1plus roadmap
Doom article: gamerant.com/weirdest-consoles-you-can-play-doom-on

7:38 Reasons against X1plus

9:45 What has been revealed about Bambu Lab?
Bambu Lab A1 test: youtu.be/w3im2xPieN4

11:00 Why should you care about this?
OrcaSlicer: github.com/SoftFever/OrcaSlicer
Bambu Studio releases: github.com/bambulab/BambuStudio/releases

11:55 What will happen next?

12:45 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

3D printing mysteries that need to be solved in 2024

Teaching Tech 2023-12-29 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

As 2023 comes to a close, there’s some burning questions I’d like help answering. In this video, I explore six mysteries on my mind, in the hope we can solve them in 2024.

Generally, this video is fun, but community toxicity is a serious topic worth examining. Let’s hope we can do so in a positive way.

0:00 Introduction

0:42 What ever happened to non-planar printing?
Non-planar printing video: youtu.be/gmePlcU0TRw
https://www.nonplanar.xyz/
CNC Kitchen Non-planar website: cnckitchen.com/blog/non-planar-3d-printing-by-bending-g-code

3:13 Does filament flow differently in each hemisphere?
Coriolis force wiki: en.wikipedia.org/wiki/Coriolis_force
Toilet flushing article: howitworksdaily.com/do-toilets-flush-in-different-directions-in-the-northern-and-southern-hemisphere

4:42 Why is the maker community becoming more toxic?
Normal distribution graphic by D Wells: commons.wikimedia.org/wiki/File:Standard_Normal_Distribution.png
RatRig build: youtube.com/playlist?list=PLGqRUdq5ULsO0oLRZ1wiYvvpbhj4EV-Nf
SK-tank build: youtube.com/playlist?list=PLGqRUdq5ULsN9t4-9rcoVKoYQgXFqCA97

8:36 Why does my filament snap like this?

9:20 What is the 3Dbenchy’s secret?
3Dbenchy website: 3dbenchy.com/features
3Dbenchy explainer video: youtu.be/t_7EMnQ6Rlc
Real Same Prentice YouTube channel: youtube.com/therealsamprentice

10:55 What creates these surface artefacts?

12:44 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Designing for vase mode - 3D design for 3D printing

Teaching Tech 2023-12-22 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

To get the best out of 3D printing, it helps if you can design your own parts. In this tutorial series, we will learn to use a free 3D CAD program to do just that.

In this episode, I demonstrate how to use simple shapes with helices and patterns to create repeating geometry suitable for vase mode 3D printing. The same concepts are repeated each time, with small variations, which means you can easily change aspects to experiment and see how the final result is altered. I also cover what vase mode is and how to activate it in your slicer.

This tutorial is near the end of a long series. It assumes you are already proficient with Onshape. If you try to follow this as a beginner, you will find it way too fast. Please see the earlier videos in the playlist to pick up the basics.

3D design for 3D printing source CAD: cad.onshape.com/documents/b5475ccd1f83733e348c59b0/w/f0f78c61f2ac76b0b03c0692/e/ca79817610f17c7ec08c141b?renderMode=0&uiState=64b62dfcf9e29341a631eb04

0:00 Introduction
3D design for 3D printing playlist: youtube.com/playlist?list=PLGqRUdq5ULsONnjEEPeBxxStEsobDKAtV
Printables holidays decoration competition: printables.com/contest/416-2023-holiday-decorations

0:55 What is vase/spiral contour mode?

2:30 How to activate vase/spiral contour mode in your slicer

3:50 Design requirements

5:34 Source CAD in Onshape
cad.onshape.com/documents/b5475ccd1f83733e348c59b0/w/f0f78c61f2ac76b0b03c0692/e/320d6efdee68b83f79fe35ef?renderMode=0&uiState=658376ddf458b462a1a00a93

5:46 Linear pattern vase

7:27 Circular pattern vase

9:17 Circular pattern with swept helix vase

11:08 Projected shape, curve pattern vase

13:12 Helix curve pattern around curvy object vase
pmd instructions: forum.onshape.com/discussion/21312/creating-a-helix-around-a-non-cylindrical-shape

15:46 Christmas bauble style vase

17:02 Experimentation vase

17:57 Conclusion

Other vases shown in this video
Wavy Pencil Holder by SNASA: printables.com/model/327316-wavy-pencil-holder-vase-mode
Over Engineered Olpe Vase by Nat A Cyborg: printables.com/model/290951-a-slightly-overengineered-olpe-vase-print-in-vase-
Faceted vase by gregp228: printables.com/model/1888-faceted-vase

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Bambu Lab A1 detailed test - ‘Just works’ 3D printing for a great price

Teaching Tech 2023-12-15 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Bambu Lab continues their disruption of the 3D printer market with the new A1 and AMS lite. Sharing components from both the A1 mini and more expensive X1/P1 series, the A1 aims to offer a smooth ‘just works; experience for a hugely competitive price. In this video, I conduct a detailed test to find what it does well and expose its weaknesses.

I would have liked the print quality, specifically the part cooling to be a little better, but even in this state, I feel this package offers an amazing all around experience. For comparison, the last printer I tested from a reputable brand had been out for months and still had significant issues and unfinished features. This 3D printer isn’t perfect but its smart features, ecosystem and support network remove many of the barriers to those new to 3D printing.

This printer was provided free of charge for the purpose of making this video. It was tested according to my review policy linked below. All opinions expressed are my own.

Purchase the Bambu Lab A1 (affiliate): shareasale.com/r.cfm?b=2485357&u=2259340&m=138211&urllink=&afftrack=

0:00 Introduction

0:48 What is the Bambu Lab A1?
Review policy: teachingtechyt.github.io/reviewpolicy.html

2:08 Unboxing and setup

4:53 A1 Mini vs A1 comparison

6:24 Bambu Lab part cross compatibility
PEO patterned bed on Aliexpress: https://s.click.aliexpress.com/e/_DCTHuU1
Garolite bed plates for Bambu Lab printers: https://vpsdata.shop/bambulab

7:06 Filament loading

7:35 SD card prints
Chain mail by Flowalistik: printables.com/model/286-chainmail-3d-printable-fabric

9:32 Sliced prints
Noctua desk fan stand by Fieser_Fettsack: thingiverse.com/thing:5421764
120mm desk fan by dmytro: printables.com/model/72449-120mm-desk-fan
Noctua Style Desk Fan (120mm) by analogicparadox: printables.com/model/309167-noctua-style-desk-fan-120mm
My bedside table clamp remix: printables.com/model/678796-120mm-desk-fan-clamp-stand-remix
Rectangular trash can by Omdoyas: thingiverse.com/thing:4725064
HueForge Bambu blue set by Ian Smalley - hueforge: makerworld.com/en/models/84373#profileId-90180
My Hueforge guide video: youtu.be/ua3DoRlmN-c
Flexi Baby dragon.v2.0 by 3D design shop: makerworld.com/en/models/81584#profileId-86859
Reducing Bambu Lab multi-colour waste: youtu.be/p3ZIM3megIU

13:09 Mystery box jet engine project
3D Printable Jet Engine by CATIAV5FTW: makerworld.com/de/models/13806#profileId-74392

14:35 Volume

15:03 AMS lite top mounting

16:20 Summary: An anecdote

17:46 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Open source filament pelletizer | Naomi Wu needs our help

Teaching Tech 2023-12-08 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

I am passionate about finding ways to recycle waste prints and filament, so I needed a filament pelletizer. None of those already published quite met my requirements, so I designed my own from scratch.

This video also aims to help Naomi Wu, a maker with the utmost integrity, who has put the community first repeatedly. Her actions have drawn negative attention from her government, and she effectively cannot post on social media anymore.If you need a threaded insert heat press, support Naomi by purchasing this one from her store:

cybernightmarket.com/products/heat-set-insert-press

This product was sent to me free of charge by Naomi for the purpose of testing, BEFORE I learned of her current situation. I was happy to pay for one, but she is very generous. It has been tested in accordance with my review policy and all opinions expressed are my own: teachingtechyt.github.io/reviewpolicy.html

0:00 Introduction

0:36 Naomi Wu is an asset to the maker community
Naomi Wu’s YouTube channel: youtube.com/@Naomi-Wu

3:00 Naomi Wu’s current situation
Naomi Wu video by Rebecca Watson: www.youtube.com/watch?v=ei7OQDVOYDY

3:39 Naomi’s Cybernightmarket store
cybernightmarket.com

4:18 Why you might want a filament pelletizer

5:18 Exploring existing pelletizer designs
Filament pelletizer by BusterBeagle3D: thingiverse.com/thing:3432202
3D Filament Pelletizer Powered by Drill by wahada: thingiverse.com/thing:288465
UnStruder - Filament Pelletizer by all_scan_everything: thingiverse.com/thing:3524799

6:51 Designing my own pelletizer
My filament pelletizer on Printables: printables.com/model/672486-self-feeding-open-source-filament-pelletizer

8:07 Unboxing and assembly of heat press machine

8:45 Use of machine to melt in inserts
Naomi Wu heat press video: youtube.com/watch?v=4RqWnXI1ZOo

11:25 Assembly
Pelletizer assembly video: youtu.be/ythBhR1sLiQ

11:39 Convenient iteration thanks to threaded inserts

12:35 Finished pelletizer

13:03 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

5 Practical 3D prints that saved the day

Teaching Tech 2023-12-01 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

3D printing is a powerful tool for creating practical solutions. In this video, I showcase five times where a simple, practical print recovered a problematic situation. If you need evidence that it’s useful to pick up some 3D design skills, this should be it.

If you need some thorough destructive testing, or some sweat/sunscreen licked off your arm, please get in contact with Bret and Jemaine.

0:00 Introduction

0:44 Fixing self locking doors
Digital calipers on Amazon (affiliate): amzn.to/3Bu6yjN
3d Design Gauges 1-14mm by Kabliga: printables.com/model/269725-3d-design-gauges-1-14mm

2:22 Custom laptop storage
Laser cut drawer video: youtu.be/kYTo9w31Tso

4:56 Drawers - Measure twice, purchase once

7:15 Rat proofing animal feed
Automated goat pellet feeder: youtu.be/Hz5E83ftKio
Feeder: grandpasfeeders.com

10:21 Repairing broken chicken feeders
Chicken feeder: https://www.dineachook.com.au/dine-a-chook-large-chicken-feeder/

12:03 Bonus: Last minute diorama props
Ruined house by Jeremy Connaughton: myminifactory.com/object/3d-print-ruined-mediterranean-style-house-67118

12:23 Conclusion
3D design for 3D printing playlist: youtube.com/playlist?list=PLGqRUdq5ULsONnjEEPeBxxStEsobDKAtV

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Melting plastic waste into beautiful flat sheets on a budget

Teaching Tech 2023-11-24 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Finally, a decent end result when it comes to recycling 3D print waste into another product. Precious Plastic have some fantastic machines, but they are not intended for low volume users like myself. In this video, I show how a simple and inexpensive t-shirt heat press can be used to convert shredded plastic, or Bambu Lab purge poops, into uniform, flat sheets.

All equipment was purchased with my own money. Total cost: just over $200 USD. In future, I’m going to try melting down more types of plastic to recycle them. Let me know your ideas and suggestions in the comments.

0:00 Introduction

1:00 Previous recycling recap
Initial paper shredder video: youtu.be/8HVjUGZM_cQ
Precious Plastics shredder video: youtu.be/NL-k8kJ8yig
Home injection molding video: youtu.be/4BRNVmtP7Rs

2:29 Precious Plastics sheet press
Sheet press: preciousplastic.com/starterkits/showcase/sheetpress
Sheet press build page: community.preciousplastic.com/academy/build/sheetpress
Bazaar page: bazar.preciousplastic.com/machines/sheetpress
Sheet press video: youtube.com/watch?v=CPl32aKtsE8

3:54 Trialling a t-shirt heat press
Old video on custom t-shirt graphics: youtu.be/gsxHDfb9gsE

5:37 Testing and refining the heat press process
Vevor 380mm heat press: https://www.vevor.com.au/heat-press-machine-c_11148/vevor-digital-heat-press-sublimation-machine-38x38-heat-press-for-t-shirts-p_010645838987
BBQ liners: https://www.bunnings.com.au/jumbuck-hot-plate-liner_p0262748
Aluminium bar: https://www.bunnings.com.au/metal-mate-12-x-3mm-1m-aluminium-flat-bar_p1064249
My source CAD for the corner brackets: cad.onshape.com/documents/d620c733b222a6028cd1baa1/w/b280ca1825707eef1b27f3a6/e/69a07b688b218171e2643f64?renderMode=0&uiState=655ee209ec2f664ce423420a
Purchase the Carvera CNC (affiliate): bit.ly/3CVfsq3

8:55 The final process

10:26 Using Bambu Lab purge poops

11:19 Making stuff with the recycled sheets
How to guides: community.preciousplastic.com/how-to?search=sheet&category=Products
Bending guide: community.preciousplastic.com/how-to/bend-plastic-sheets
Knife: community.preciousplastic.com/how-to/make-an-hdpe-knife
Bendy flat objects video: youtu.be/8WEqKYa6XRk
Dragon clipart: inspireuplift.com/Dragon-Svg-Dragon-Head-Svg-Dragon-Silhouette-Dragon-Clipart-/iu/89579
Bicycle kick art: etsy.com/au/listing/699626080/bicycle-kick-soccer-player-score-goal

12:48 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Add 3D logos and text to your 3D prints easily with SVG emboss + Prusa XL update

Teaching Tech 2023-11-17 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

3D printing slicing software developers are producing fantastic new features very regularly. Today, we test out the new SVG emboss in PrusaSlicer. This guide covers what an SVG file is, where to find them, converting to SVG from jpeg, and different ways to apply them to 3D models before printing.

I also take the chance to update the performance of the 5 tool Prusa XL with the latest PrusaSlicer beta update. The ramming feature being enabled has made a significant difference, but there are still some areas which need attention.

0:00 Introduction

0:44 Prusa XL update - PrusaSlicer 2.7.0 beta1

4:43 What is an SVG file?
SVG wiki: en.wikipedia.org/wiki/SVG
Inkscape: inkscape.org

6:14 Where to get an SVG file from?
McLaren logo svg: commons.wikimedia.org/wiki/File:McLaren_Automotive_logo.svg
McLaren logo raster image: 1000logos.net/mclaren-logo

6:49 Converting jpeg/png to svg:
Online svg converter: imagetostl.com/convert/file/jpg/to/svg

7:34 Adding text to a 3D model

9:33 Importing and positioning an SVG on a 3D model

10:13 Join method

10:46 Cut method

11:28 Modifier method
Print in place racing car by PapaBearAZ: printables.com/model/588160-print-in-place-f1-race-car

13:25 Multi colour method
Helmet remix by Jester80: printables.com/model/532398-pilot-racing-driver-helmet

14:58 Fancy print
Yelling bearded Budha by SavageRodent: printables.com/model/190831-yelling-bearded-buddha
Polylite dual silk PLA: https://x3d.com.au/products/polylite-pla-dual-silk-1-75-mm?variant=43990794207461

15:54 Exporting to other slicers

16:23 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Prusa XL update: Was the alpha firmware to blame?

Teaching Tech 2023-11-10 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Original video: youtu.be/C1a2c-qeTQw

Some commenters pointed out that my XL testing was all done wit the alpha release of the firmware and slicer. This is a fair criticism, so in the interest of fairness and transparency, let's rectify that.

The original video was already long and the problems I was seeing were posted on the forums by others BEFORE the alpha releases came out, hence why I didn't include a roll back test.

Hopefully this video confirms the problems are with the XL, not just the alpha firmware/slicer. Fingers crossed Prusa come through with some timely fixes.

Nozzle scrubber by Surfalex2000: printables.com/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-now-w

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

The 5 tool Prusa XL is currently flawed, but I think it can be fixed

Teaching Tech 2023-11-10 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

A QUICK UPDATE video using non alpha firmware: youtu.be/bVY3S22L4EY
2nd update: Prusa have released a new version of the slicer with some counter measures for the blobbing and stringing. I will keep testing and update in a future video.

It’s been delayed for some time and the price hasn’t gotten any cheaper, but finally my 5 tool Prusa XL has arrived. Was it worth the wait? So far, the printer is quite undercooked. In this video I take you through my honest experience, including the problems myself and other owners are facing, as well as some of my intended fixes. Hopefully Prusa can release some updates to get this machine working as it should.

My apologies for my ranting in this video, but honestly I could have added more. Things like needing to turn down the crash sensitivity to stop false positives, the nozzle dragging across the bed after purging and leaving trails, the fact that you can’t adjust things like acceleration from the printer settings, the friction from the long ptfe tubes making it impossible to load tpu without pulling bits off, the PTFE tubes rubbing on the metal frame behind the tool posts, the USB flash drive being fussy with insertion angle.. The whole thing is just underwhelming.

This video is dedicated to my two dogs, Ricciardo and Sofia, who were both tragically killed by snake bite this week. Treasure your time with loved ones and pets, because you never know how long you will have with them.

0:00 Introduction

0:45 What is the Prusa XL?
Prusa XL store page: prusa3d.com/product/original-prusa-xl-semi-assembled-3d-printer
3D Printing Nerd XL video: www.youtube.com/watch?v=NhdBLtDVnNc

1:34 Delays and the context behind this purchase

3:33 Unboxing and setup
Robert Cowan channel: youtube.com/channel/UCPOTPYuDsKnXP9I-ph4yMgg

6:18 Self calibration and first print

7:27 Updating to alpha firmware and slicer

8:11 First sliced print

9:23 Initial multi-colour printing
Bambu Lab A1 Mini multi colour waste video: youtu.be/p3ZIM3megIU

11:11 Prusa GitHub and forums

11:29 Retraction and tool change tuning rabbit hole
3D print dogs video: youtube.com/watch?v=agihAiTZJ00
Nozzle scrubber by Surfalex2000: printables.com/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-now-w

15:55 Further print progress

17:53 Rant: This XL experience is really not good enough

20:42 What the XL does well

22:06 10 proposed fixes and improvements

26:27 Conclusion

Models in this video:
3Dbenchy: 3dbenchy.com
Multi-color Sushi (maki) by MosaicManufacturing: thingiverse.com/thing:2433872
Marlin multi material remix by Cipis: printables.com/model/5480-marlin-multi-material
Previous video on Bambu Lab multi colour printing: youtu.be/p3ZIM3megIU
Refined gear bearing by Austin Vojta: printables.com/model/114842-refined-gear-bearing
Low poly squirtle by Agustin Arroyo: printables.com/model/255-low-poly-squirtle-multi-and-dual-extrusion-version
Tavern / Secret Dice Tower by MosaicManufacturing: thingiverse.com/thing:5381733
Support test by Faulty Data: printables.com/model/198420-support-test

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Comparing 3D printing model websites objectively to find a winner

Teaching Tech 2023-11-03 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

If you want a 3D model to 3D print, there are plenty of options available. In fact, there are almost too many options. In this video, we compare six different sites across ten different areas, with the aim of allowing you to pick the solution that caters to your needs.

I tried to be as meticulous as possible in preparing this video. As far as I am aware, all information is correct at the time of publishing. If mistakes are pointed out, I will note them in a pinned comment.

0:00 Introduction

0:44 Overview of options
Thingiverse: thingiverse.com
Ultimaker Makerbot merger article: prnewswire.com/news-releases/ultimaker-and-makerbot-announce-closing-of-merger-301622712.html
Myminifactory: myminifactory.com
Cults3D: cults3d.com
CrealityCloud: crealitycloud.com
Thangs: thangs.com
Printables: printables.com
Makerworld: makerworld.com

3:16 Free vs paid models

5:28 Advertising

6:39 Search functionality

7:56 Contests

8:38 Companion apps

10:07 Cloud/automatic printing

11:32 Rewards

12:30 Communities

13:30 Guides

14:12 How many is too many?

15:01 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Reducing waste from Bambu Lab AMS (lite) prints

Teaching Tech 2023-10-27 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Bambu Lab 3d printers produce really clean multi-material results. However, due to a filament cutting system that prioritises reliability, there can be an excessive amount of filament and time wasted. In this video, I explore some options for clawing some efficiency back. The gains aren’t huge, but are still worthwhile.

Thanks to my patron David who inspired this video during a great discussion.

Purchase the Bambu Lab A1 mini (affiliate): shareasale.com/r.cfm?b=2420414&u=2259340&m=138211&urllink=&afftrack=

0:00 Introduction

0:50 How the Bambu Lab filament change system works

2:43 Test multi-colour print
Marlin multi material remix by Cipis: printables.com/model/5480-marlin-multi-material

3:20 Single colour vs multi-colour

4:40 Purge into infill and/or support

6:08 Flushing volumes

8:56 Potential g-code tweaks

9:57 Printing multiples for efficiency

10:41 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

STL thumbnails and other 3D printing computer optimisations

Teaching Tech 2023-10-24 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Viewers have been asking me how to get STL files to display a preview thumbnail rather than a generic icon. In this video, we cover that as well as another piece of software which is ideal for previewing STLs files. All software in this guide is free and easy to use.

If you have similar suggestions for Mac and/or Linux, please post them in the comments.

0:00 Introduction

0:38 Pinned folders for easy access to files

1:41 STL Thumbnails
Papa’s best STL thumbnails: papas-best.com/stlthumbnails_en

3:29 STL viewer
Papa’s best STL Viewer: papas-best.com/stlviewer_en

6:09 Customisation

6:44 Troubleshooting

7:19 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

The best 3D prints to organise your life - Part 2

Teaching Tech 2023-10-20 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

3D printing is not just for useless knick knacks. It can be used to create simple but effective solutions for little problems we encounter everyday. This video showcases more practical prints to help organise your life. Each model is free, easy to print and no special hardware or tools are required to assemble or use them.

These are the types of prints that can convince friends and family that 3D printing is in fact pretty useful. Consider what you can make for your loved ones to put a smile on their faces.

Some of the filaments from this video: Stone PLA: https://x3d.com.au/products/x3d-pro-stone-1-75-mm Marble PLA: https://x3d.com.au/products/marble-stone Winter gradient PLA: https://x3d.com.au/products/x3d-pro-gradient-pla-1kg-1-75-mm Starlight Twinkling PLA: https://x3d.com.au/products/polylite-starlight-pla-1-75-mm

0:00 Introduction
The best 3D prints to organise your life part 1: youtu.be/mbyoIavRC8s
3D printed tools part 1: youtu.be/tO5Ym6-H2Ac
3D printed tools part 2: youtu.be/bktZTYj2ElM

0:40 Office
Business card holder by Dantech: printables.com/model/369106-business-card-holder
Business card holder by JuliusFred: printables.com/model/367914-business-card-holder
Sound diffusion panels by Widgets: printables.com/model/561606-sound-diffusion-panels

3:36 General
Universal key cover by Phil Caruso: printables.com/model/613681-universal-key-cover
Imperial key cover by llanterner: printables.com/model/612967-imperial-key-cover
HueForge video with guide to filament swapping: youtu.be/ua3DoRlmN-c
KLAMMA cable clip by Bequ3 (stick on): printables.com/model/359285-klamma-locking-cable-clip
KLIPPT cable clip by Bequ3 (screw on): printables.com/model/424351-klippt-locking-cable-clip
Cable organizer by Nordheim: printables.com/model/578837-cable-organizer

7:52 Kitchen/Bathroom/Laundry
Robust drain snake by galactic: printables.com/model/85530-robust-drain-snake
Clothes peg by Tvorim3D: printables.com/model/46765-clothes-peg-kolicek-na-pradlo
Gravity broom holder by LoboCNC: printables.com/model/152557-gravity-broom-holder

10:19 Car
Car seat hook by Capsel22: printables.com/model/597846-hook-for-a-car-seat
Trunk velcro holders by David D: printables.com/model/598851-trunk-velcro-holders

11:51 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

xtouch Bambu Lab P1P/P1S touch screen upgrade guide

Teaching Tech 2023-10-13 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

The main thing that annoys me about using the Bambu Lab P1P/P1S is the control panel. The screen is small and long strings of text have to be scrolled, plus the interface for things like setting the temperature is very clumsy. Thanks to developer experiments, the xtouch touch screen interface is now available, for a total cost under $10.

I first tried this upgrade back in August, but there were some issues that diminished the experience. Experiments has since developed xtouch to a really polished product. I am very thankful for their efforts!

xtouch by experiments: github.com/xperiments-in/xtouch

Purchase the P1P: shareasale.com/r.cfm?b=2354726&u=2259340&m=138211&urllink=&afftrack=
Purchase the P1S: shareasale.com/r.cfm?b=2377904&u=2259340&m=138211&urllink=&afftrack=

0:00 Introduction

0:56 X1 vs P1 key differences

2:34 xtouch by xperiments
xtouch on GitHub: github.com/xperiments-in/xtouch
Bambu Lab forum post: forum.bambulab.com/t/added-p1p-a-touch-screen/19017

3:29 ESP32 touch screen purchase and unboxing

4:31 Drivers

4:46 Preparing an SD card

5:30 Flashing firmware

6:27 Connection and pairing

7:17 Supplying power

7:48 Features and settings

9:34 Enclosure

Source CAD: cad.onshape.com/documents/45fd6fd6055835bc3ea98a37/w/1ef8d7c52ad3354ac787833e/e/6b500ddab5b98a62f3557288?renderMode=0&uiState=6525c4f2e48e0b417fef2e84

Enclosure on Printables: printables.com/model/611634-xtouch-enclosure-for-bambu-lab-p1ps

11:29 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Four bar linkages for 3D printing - Guide with examples

Teaching Tech 2023-10-06 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Building on my previous breakdown of over centre and cam mechanisms, in this video we explore four bar linkages. This is another versatile mechanism that can be configured in numerous ways. In this video, I design and 3d print a modular version so these configurations can be tested and demonstrated. We explore scenarios for introducing motors and servos too.

Source CAD for this video: cad.onshape.com/documents/e7b4a400b3ab336cfed7c8be/w/0ca1155a8ac8aea791c77b56/e/814cffd987d991fd61959a80?renderMode=0&uiState=651d6897d973aa1d24e67969

0:00 Introduction
Previous video on over centre mechanisms: youtu.be/NVtsrisYtUE

0:44 Where do we find four bar linkage mechanisms?
Four bar linkage wiki: en.wikipedia.org/wiki/Four-bar_linkage
Watt’s linkage wiki: en.wikipedia.org/wiki/Watt%27s_linkage

1:52 How does a four bar linkage work?
Four bar linkages by Matthew West: https://dynref.engr.illinois.edu/aml.html

3:32 Designing and assembling a modular, printable mechanism

5:11 Testing various linkage configurations

6:46 Adding a motor
36rpm geared 12V DC motor: https://www.jaycar.com.au/36rpm-12vdc-reversible-gearhead-motor/p/YG2734

7:59 Adding a servo
Pololu Maestro servo controller: amzn.to/48GubUs

10:47 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Orca Slicer getting started guide: A slicer for all of your 3D printers

Teaching Tech 2023-09-29 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

A while back, I discovered Orca Slicer, a fork of Bambu Studio that could handle Bambu Lab 3D printers as well as other Marlin and Klipper machines too. Since then, it has evolved and I have adopted it as my primary slicer.

My patron Derek asked for a beginner’s guide on migrating to Orca Slicer. In this video, we cover download and installation, first run, basic slicing, security tips and other useful features. There is plenty that’s beyond the scope of this video, but hopefully enough is covered to let you hit the ground running.

Orca Slicer GitHub: github.com/SoftFever/OrcaSlicer

0:00 Introduction
Original Orca Slicer video: youtu.be/MqkC-STieww

0:45 What is Orca Slicer?

2:43 Why have I switched to Orca Slicer?

4:12 Download and installation/update
Orca Slicer releases: github.com/SoftFever/OrcaSlicer/releases

5:07 First run - Network plugin and account login

6:49 Setting up printers and filaments

8:17 Exploring profiles: printer, filament and print settings

9:40 Basic model importing and slicing

10:47 Projects and plates
Infill modifiers video: youtu.be/3hi2_9-YCbM

14:13 Paint-on supports

14:48 Modifiers

15:38 Calibration

16:05 Security: stealth mode
Bambu Lab article on what modes allow what: wiki.bambulab.com/en/software/bambu-studio/remote-control
Discussion of stealth mode development: github.com/SoftFever/OrcaSlicer/issues/1663

16:34 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Bambu Lab A1 Mini + AMS Lite: The ideal beginner 3D printer?

Teaching Tech 2023-09-22 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

A new 3D printer from Bambu Lab, aimed at those entering the hobby. The A1 Mini and AMS Lite are packed with smart features that make it easy to set up and use. In this video, I put them through their paces, to find out what they do well, and where improvement is needed.

These printers were supplied free of charge by Bambu Lab for the purpose of testing, in accordance with my review policy. All opinions expressed are my own.

Purchase the Bambu Lab A1 mini (affiliate): shareasale.com/r.cfm?b=2420414&u=2259340&m=138211&urllink=&afftrack=

0:00 Introduction

0:53 Specifications and price
A1 mini details page: bambulab.com/en-au/a1-mini
Prusa Mini: prusa3d.com/category/original-prusa-mini
Review policy: teachingtechyt.github.io/reviewpolicy.html

2:39 Unboxing and setup

5:35 AMS lite filament loading

6:18 Pre-sliced prints

8:43 Further test prints

12:38 Mystery box print - wireless mouse

14:35 MakerWorld
MakerWorld blog post: blog.bambulab.com/makerworld-3d-model-platform
MakerWorld: makerworld.com

16:26 Machine inspection and features

19:08 Pros and cons

22:07 Summary

Models and images used in this video:
Glitch planter vase by vexanix: printables.com/model/287770-glitch-planter
Suspended hand by STomHacks: printables.com/model/573397-suspended-hand
Daniel Ricciardo by Morio: commons.wikimedia.org/wiki/File:Daniel_Ricciardo_2015_Malaysia.jpg
Death Star Lamp by Kilola: makerworld.com/en/models/14717?profileId=14536
Adjustable wrench Print-in-Place by Teslaactions: printables.com/model/562426-adjustable-wrench-print-in-place-for-mini
Darth Vader bust by Eastman: printables.com/model/36697-darth-vader-bust-stl
Print in place robot by EXTREME3DPRINT: cults3d.com/en/3d-model/gadget/pipbot-1-print-in-place-robot
Router bit holder by djos_1475: printables.com/model/488043-cnc-router-bit-holder-wall-mount

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

HueForge getting started guide: Filament painting with your 3D printer

Teaching Tech 2023-09-15 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Amazing, photo-like 3D prints without a multi material 3D printer? That’s exactly what Hueforge can deliver. Taking advantage of the fact that filaments aren’t opaque and instead let light transmit through them, it combines an image to 3D STL function with predictive colour blending to achieve the required result. In this video, I take you through an introductory tour of HueForge, so you can decide if it is something you may wish to try yourself. You should!

I purchased this software with my own money. All opinions are my own. Thanks to Cory for requesting the video.

0:00 Introduction

0:45 What is HueForge?
Hueforge website: shop.thehueforge.com

3:28 Prerequisites
Marlin firmware editing: youtu.be/eq_ygvHF29I
Klipper sample macros: github.com/Klipper3d/klipper/blob/master/config/sample-macros.cfg

5:04 Resources
Hueforging YouTube channel: youtube.com/@hueforging

5:27 Slicing and printing a premade STL
Steve from HueForge models on Printables: printables.com/@StephenLaveda_686551/models
Man in a Spacesuit Graphic Art: printables.com/model/492624-man-in-a-spacesuit-graphic-art

9:21 Purchasing and installing HueForge

10:07 Interface and workflow overview

12:14 Calibrating a new filament

14:51 Preparing a job from scratch
Ayrton Senna by Instituto Ayrton Senna: commons.wikimedia.org/wiki/File:Ayrton_Senna_9.jpg
Licensed under Creative Commons Attribution 2.0 Generic: creativecommons.org/licenses/by/2.0/deed.en

15:30 Slicing for a multi material 3D printer
Purchase the Bambu Lab X1 Carbon (affiliate): shareasale.com/r.cfm?b=2353821&u=2259340&m=138211&urllink=&afftrack=

16:38 More examples
Grogu image by Hiva Sobhani: pexels.com/photo/baby-grogu-14561255
Pele con brasil: commons.wikimedia.org/wiki/File:Pele_con_brasil.jpg

18:45 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Destructive testing with a custom hammering machine

Teaching Tech 2023-09-08 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

If you want to conduct intelligent strength testing, then you need a suitable testing tool. I didn’t have one, but after I saw a video from Fireball Tool, I knew exactly how to make a good one. In this video, I take you through my automatic hammering machine. How it works, how to put it together, and how to use it in two different modes of operation.

My open source strength tester on Printables: printables.com/model/576121-destructive-testing-mechanical-hammering-machine

0:00 Introduction
Fireball Tool channel: youtube.com/@FireballTool

0:37 Inspiration
Fireball Tool vise testing video: youtube.com/watch?v=CubcmE4kt78

2:16 Source CAD: cad.onshape.com/documents/3708cd847bf60e565612c4a5/w/027012700fa9580a16c5e49e/e/858bb56a08d2868deff223db?renderMode=0&uiState=64fa593afbe4a667db18706f

2:46 Printable parts

3:27 Other hardware
Drill vice: https://www.bunnings.com.au/craftright-75mm-drill-press-vice_p5860161
Geared DC motor: https://www.jaycar.com.au/36rpm-12vdc-reversible-gearhead-motor/p/YG2734
Hammer: https://www.bunnings.com.au/craftright-14mm-cross-pein-hammer-with-fibreglass-handle_p5560151
608Z bearings: amzn.to/44GxfNi
625Z bearings: amzn.to/44HJwku

4:28 Assembly

8:22 Repeated smash usage for impact strength

10:10 Shear strength add on assembly

11:35 Shear strength usage

13:04 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

3D printed velcro is something you have to try

Teaching Tech 2023-09-01 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Velcro is cool but fully 3D printable velcro is better (or maybe I’m just biased). In this video, I explore the models available on Printables and then convert my favourite to be fully parametric in OpenScad. What will you make with 3D printable velcro?

Printables page with OpenScad file and some pre-exported STLs: printables.com/model/568587-parametric-3d-printable-velcro

0:00 Introduction

0:42 What is velcro?

1:57 How does 3D printed velcro work?
Velcro competition on Printables: printables.com/contest/397-hook-loop-prints
Plastic Velcro! Super Strong “Hook and Loop” BowieInc Connector! : printables.com/model/549525-plastic-velcro-super-strong-hook-and-loop-bowieinc
Printable Velcro by MM Printing: printables.com/model/543802-printable-velcro
Printable VELCRO by eried: printables.com/model/33302-printable-velcro

4:38 What material is best?

6:20 Strength testing

8:44 Parametric version in OpenScad
OpenScad free download: openscad.org/downloads.html

12:22 Example usage
Import scad files with Freecad guide: wiki.freecad.org/Import_OpenSCAD_code

13:41 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Home injection molding part 2: Machining a mold

Teaching Tech 2023-08-25 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

It’s time for some home based injection molding. I’ve had this machine since 2014, but it has been sitting idle for a while now, due to an error on my part. Last time, I smashed some stuff to get it unseized. This video is all about mold making. Including 3D printing molds for silicone, and CNC milling aluminium molds for plastic using the Carvera desktop CNC. Not everything went as planned..

Please note that this machine is sold to suit 110V mains voltage. In Australia we use 220V, and I’m pretty sure I removed one heater and converted the other. If you also use 220V, you would need to do the same or use a step down converter.

0:00 Introduction
Part 1: youtu.be/4BRNVmtP7Rs

0:43 Replacement washers / o-rings fail
CNC Kitchen silicone sock video: youtube.com/watch?v=O5UiXky85hA
RTV silicone wiki: en.wikipedia.org/wiki/RTV_silicone
Release agent: https://melbourneartdirect.com.au/product/ease-release-200-aerosol/

6:10 Prepping mold material and cutters
10mm aluminium plate in Aus: https://www.makerstore.com.au/product/mat-al/

7:14 Target object

8:05 Designing the mold

9:39 CAM
Kiri:Moto: https://grid.space/kiri/

10:44 Machining and inspecting the mold
Purchase the Carvera CNC (affiliate): bit.ly/3CVfsq3 Use code 'TeachingTech' for a small discount.

12:04 Diagnosing the problem

13:30 Post processing the mold

14:49 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Make your parts bendy with this design hack - 3D design for 3D printing

Teaching Tech 2023-08-18 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

To get the best out of 3D printing, it helps if you can design your own parts. In this tutorial series, we will learn to use a free 3D CAD program to do just that.

In this episode, I demonstrate how to cut a slot pattern into lat parts to make them bendy and flexible. A step by step guide is provided, as well as a version that you can apply without learning CAD in your slicing software or with TinkerCAD.

My instructions, 3D files and slicer templates on Printables: printables.com/model/556103-making-flat-but-bendable-models-with-a-slot-patter

3D design for 3D printing source CAD: cad.onshape.com/documents/b5475ccd1f83733e348c59b0/w/f0f78c61f2ac76b0b03c0692/e/ca79817610f17c7ec08c141b?renderMode=0&uiState=64b62dfcf9e29341a631eb04

0:00 Introduction
3D design for 3D printing playlist: youtube.com/playlist?list=PLGqRUdq5ULsONnjEEPeBxxStEsobDKAtV

0:53 Laser cut example

1:41 Extruding the base shape

2:04 Sketching the basic slots in Onshape

4:02 Patterning and trimming the slots

6:11 Positioning the slot pattern

6:48 Extruding the slot pattern as a cut

7:11 Recap of steps

8:14 Slicing, printing and testing

9:15 Semi dodecahedron folding bowl

10:22 Compound curve testing
Steam bend furniture article: designboom.com/architecture/tom-raffield-steam-bent-wooden-home-cornwall-england-01-02-2017

11:00 Phone holder experiment

12:37 Slicer only version

13:32 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Designing for multi colour/extrusion - 3D design for 3D printing

Teaching Tech 2023-08-15 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

To get the best out of 3D printing, it helps if you can design your own parts. In this tutorial series, we will learn to use a free 3D CAD program to do just that.

In this episode, I demonstrate how to convert logos and other graphics into clean, multi-part models for multi-colour 3D printing. This step by step guide includes converting from jpeg to raster, slicing and printing.

3D design for 3D printing source CAD: cad.onshape.com/documents/b5475ccd1f83733e348c59b0/w/f0f78c61f2ac76b0b03c0692/e/ca79817610f17c7ec08c141b?renderMode=0&uiState=64b62dfcf9e29341a631eb04

0:00 Introduction
3D design for 3D printing playlist: youtube.com/playlist?list=PLGqRUdq5ULsONnjEEPeBxxStEsobDKAtV

0:50 Basic sketched logo

1:24 Imported DXF logo

3:30 Exporting for slicing

4:31 Assigning filaments and slicing

5:34 Printing

5:56 Converting to DXF from an raster image
Free converter: imagetostl.com/convert/file/jpg/to/dxf

8:28 Offsetting a sketch
Open source logo by Mateo Zlatar: commons.wikimedia.org/wiki/File:Open-source-hardware-logo.svg

9:48 Detailed graphic
Bruce Lee by Apurba Kanti Roy: commons.wikimedia.org/wiki/File:Bruce_Lee_Drawing.jpg
youtube.com/@ApurbaKantiRoy

11:39 Manual tracing
Ayrton Senna Helmet: pngwing.com/en/free-png-dotcj

12:14 Conclusion
4D printing video: youtu.be/yNZ2mqYNLYI

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Master infill to take your 3D prints to the next level

Teaching Tech 2023-08-11 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Infill is probably an aspect of 3D printing we rarely consider beyond setting the density. In this video, we take a deep dive into infill, looking at what parameters best suit a range of situations. Whether you are trying to create strong prints, fast prints, or prints that use minimal filament, this guide has you covered. We also explore some more experimental options to drastically alter the appearance of our models.

STL patterns from this video on Printables: printables.com/model/549584-patterns-to-import-as-modifiers

0:00 Introduction
PEO patterned bed on Aliexpress: https://s.click.aliexpress.com/e/_DCTHuU1

0:47 What is infill?
Low poly fox: thingiverse.com/thing:937740

2:19 Slicer resources
OrcaSlicer: github.com/SoftFever/OrcaSlicer
PrusaSlicer infill reference: help.prusa3d.com/article/infill-patterns_177130
Bambu Lab infill reference: wiki.bambulab.com/en/software/bambu-studio/fill-patterns
Cura infill reference: support.ultimaker.com/s/article/1667411002588

3:02 Saving filament

5:08 Saving time

6:43 Efficient strength

9:04 Instant aesthetics

10:01 New surface finishes with infill tricks

14:14 Artistic masterpieces/abominations with no walls

17:01 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Home injection molding part 1: Machine tear down and repairs

Teaching Tech 2023-08-04 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

It’s time for some home based injection molding. I’ve had this machine since 2014, but it has been sitting idle for a while now, due to an error on my part. In this video, I start the process by cleaning and repairing to get it almost back to working order.

Please note that this machine is sold to suit 110V mains voltage. In Australia we use 220V, and I’m pretty sure I removed one heater and converted the other. If you also use 220V, you would need to do the same or use a step down converter.

Hopefully the new o-rings work well, but in any case, I’m considering casting some high temp silicone washers so I can push the temperature as necessary.

In part 2, the plan is to machine and mold and create something.

0:00 Introduction
Precious plastics shredder video: youtu.be/NL-k8kJ8yig
3D printing vs injection molding: youtu.be/xW1Ob5uzfF8

1:01 My home injection molder: stores.jacobsbaits.com/injection-press-standard-series-1
Demo video: youtube.com/watch?v=F6HidmU6pQI
Plastisol wiki: en.wikipedia.org/wiki/Plastisol

2:34 Modifications

3:04 Cleaning

3:28 Height adjustment mechanism repair

4:51 Tear down and Valve rod unseizing

9:53 Rewiring the heating element

11:20 Basic testing
PID controller manual: maxwell-fa.com/uploadfile/downloads/User%20manual-Rex%20C100,C400,C700,C900.pdf

12:01 Conclusion

Recycling logo image by Ilmari Karonen: en.wikipedia.org/wiki/File:Recycle001.svg

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

The best 3D prints to organise your life

Teaching Tech 2023-07-28 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Life can be messy, so why not 3D print some solutions? This video showcases some practical prints to help organise your life. Each model is free, easy to print and no hardware or tools are required to assemble or use them.

These are the types of prints that can convince friends and family that 3D printing is in fact pretty useful. Consider what you can make for your loved one to put a smile on their face.

Some of the filaments from this video:
Stone PLA: https://x3d.com.au/products/x3d-pro-stone-1-75-mm
Marble PLA: https://x3d.com.au/products/marble-stone
Winter gradient PLA: https://x3d.com.au/products/x3d-pro-gradient-pla-1kg-1-75-mm
Starlight twinkling PLA: https://x3d.com.au/products/polylite-starlight-pla-1-75-mm

0:00 Introduction
3D printed tools part 1: youtu.be/tO5Ym6-H2Ac
3D printed tools part 2: youtu.be/bktZTYj2ElM

0:51 Office
Wavy Pencil Holder by SNASA: printables.com/model/327316-wavy-pencil-holder-vase-mode
Pen holder by dirk144347: printables.com/model/108345-pen-holder
Skull eyeglass holder by Mocodroid: printables.com/model/359129-skull-eyeglass-holder
Sweeping 2-line name plate by Makkuro: printables.com/model/33019-sweeping-2-line-name-plate-text
OpenSCAD: openscad.org
Poo emoji: emojipedia.org/pile-of-poo

5:15 Kitchen
Fabric coasters by rorys3D: printables.com/model/230771-fabric-coasters
Curvy cam lock bag grip by squinn: printables.com/model/509410-curvy-cam-lock-bag-clip
Bottle Dryer v4 by Quattrox: printables.com/model/517569-bottle-dryer-v4-expandable
Can lid by MakerCameron: printables.com/model/507698-can-lid-soda-water-beer-etc
Red Bull dispenser by Stamatis Kambanis: printables.com/model/511721-redbull-dispenser
Drink can dispenser by Enigmar: printables.com/model/186550-drink-can-dispenser
EGG_ROLL basket by Cisco: printables.com/model/53124-egg_roll-basket
Egg rotary dispenser by Ljhtom: printables.com/model/250788-eggs-rotary-dispenser

9:18 Travel
Toothbrush case by codewarrior: printables.com/model/507125-toothbrush-travel-case-print-in-place
USB Cord winder by TinkrMakr: printables.com/model/56609-usb-cable-winder-stackable-knurled-print-in-place
Universal travel coffee gimbal by mobiobi: printables.com/model/129329-universal-travel-coffee-gimbal
Cup insert by cpenner: printables.com/model/151413-cup-insert-for-universal-travel-coffee-gimbal
Collapsible basket by 3D Printing World: printables.com/model/22400-collapsible-basket-optimized

13:13 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Remix STEP files to suit your needs - 3D design for 3D printing

Teaching Tech 2023-07-21 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

To get the best out of 3D printing, it helps if you can design your own parts. In this tutorial series, we will learn to use a free 3D CAD program to do just that.

In this episode, I demonstrate how to upload and modify STEP files into Onshape to suit our specific needs. This rugged box model is very well designed, so it is satisfying to tweak it to fit different objects. I’m going to do just that for some delicate electronics.

3D design for 3D printing source CAD: cad.onshape.com/documents/b5475ccd1f83733e348c59b0/w/f0f78c61f2ac76b0b03c0692/e/ca79817610f17c7ec08c141b?renderMode=0&uiState=64b62dfcf9e29341a631eb04

0:00 Introduction
3D design for 3D printing playlist: youtube.com/playlist?list=PLGqRUdq5ULsONnjEEPeBxxStEsobDKAtV

0:39 Target model
Rugged box (parametric) by Whity: printables.com/model/258431-rugged-box-parametric

2:00 Use native source CAD files if possible

3:26 Importing a STEP file

4:07 Using transform to position parts

5:03 Selecting segments and expanding them with Move Surface

6:22 Shrinking segments with Move Surface

7:05 Moving features into a new position

8:38 Moving faces in offset mode

9:04 Adding sketches to cut holes or add text

9:31 Printing and testing the remix
PEO patterned bed on Aliexpress: https://s.click.aliexpress.com/e/_DCTHuU1

10:12 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Design like a pro with shadow lines - 3D design for 3D printing

Teaching Tech 2023-07-18 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

To get the best out of 3D printing, it helps if you can design your own parts. In this tutorial series, we will learn to use a free 3D CAD program to do just that.

In this episode, I demonstrate how to alter the mating surfaces of multi part designs to include a shadow line. This technique is used in most professionally produced injection molded parts and offers a range of benefits.

3D design for 3D printing source CAD: cad.onshape.com/documents/b5475ccd1f83733e348c59b0/w/f0f78c61f2ac76b0b03c0692/e/ca79817610f17c7ec08c141b?renderMode=0&uiState=64b62dfcf9e29341a631eb04

0:00 Introduction
3D design for 3D printing playlist: youtube.com/playlist?list=PLGqRUdq5ULsONnjEEPeBxxStEsobDKAtV

0:40 Injection molding recap

1:32 Injection molding design features to ignore
3D printing vs injection molding video: youtu.be/xW1Ob5uzfF8
Sumitomo bottle cap video: youtube.com/watch?v=og4Uw5bJhO0

2:50 Shadow lines

3:23 Simple example - box
PEO patterned bed on Aliexpress: https://s.click.aliexpress.com/e/_DCTHuU1

7:15 Complex example - curved mating surfaces
Lumimate torch video: youtu.be/DAnosimSZlE

11:38 Summary of benefits

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Hero Me part cooling system - Modular, capable and super compatible

Teaching Tech 2023-07-14 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

Previously, I had invested quite a bit of time and effort into modifying a Creality Ender 5 to have an enclosed and actively heated chamber. The addition of the Bambu Lab X1C to my studio has made the Ender 5 redundant, however, so in this video I remove all of the heated enclosure parts, and fit the Hero Me gen 7 part cooling system.

If it feels like at some times I’m being vague, that’s on purpose. The documentation is thorough but not free, so I had to make sure not to make it redundant. I’d recommend anyone undertaking this upgrade, to pay for the detailed PDF guide at a minimum.

Hero Me on Printables: printables.com/model/39322

0:00 Introduction
Hero Me video: youtu.be/xPvLKSClShc
Hero Me gen 5 video: youtu.be/DUkoKzOFWFs

0:45 Ender 5 modification history
Ender 5 review: youtu.be/fxFLkqD6QTU
Enclosure and heater: youtu.be/mPC-2KZLMzk
Linear rails: youtu.be/I3xMHjiYENk
Euclid probe: youtu.be/egWpvaTsl10
BTT Manta M4A board: youtu.be/vZIOZTce7NI

1:40 Removing heated chamber parts

3:03 Original electronics case restoration
Manta M4P Ender 5 adaptor: printables.com/model/526233-ender-5-btt-skr-m4p-manta-mainboard-adaptor

4:05 Hero Me Gen 7 downloads and documentation
Hero Me on Printables: printables.com/model/39322
3D Printing Nerd interview video: youtube.com/watch?v=y8e68emZvH8

6:57 Part selection and printing
ABL flat mount remix by FeNi64: printables.com/model/356300-flat-abl-mount-bracket-for-hero-me-fan-duct

8:04 Installation

11:19 Adjustments and calibration

12:18 Test print comparison
Part cooling torture test: printables.com/model/180150-cooling-fan-test-torture-test

13:17 Evaluation

14:41 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

The pros and cons of 3D printer cloud connectivity

Teaching Tech 2023-07-07 | Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT

More and more 3D printers are being sold with cloud connectivity. In this video, we debate the merits of this approach. While there are some worthwhile gains in convenience, there are also some alarming possibilities too. Will the annoying trends that plague games and mobile apps find their way to 3D printing? Let’s hope not.

Please share in the comments any topics I may have missed.

0:00 Introduction

0:48 What is cloud connectivity?

2:41 Pro: Automatic remote access
Octoprint safe remote access article: octoprint.org/blog/2018/09/03/safe-remote-access
Octoprint list of remote access plugins: plugins.octoprint.org/topics/remote_access

3:45 Pro: Starting a print remotely from print history

4:28 Pro: Spaghetti detection + Feedback on print quality

5:44 Pro: Direct slice and print from Thingiverse/Printables

7:19 Con: Servers going dark
Gaming servers shut down article: gamerant.com/games-shut-down-servers-2022
THQ wiki article: en.wikipedia.org/wiki/THQ

8:53 Con: Privacy
Threads App on appstore: apps.apple.com/us/app/threads-an-instagram-app/id6446901002
Data breach article: https://www.abc.net.au/news/2023-03-28/detailed-portrait-data-breaches-oaic-disclosures/102131586
LMG Clips video on poor security: youtube.com/watch?v=2ssMQtKAMyA

10:29 Con: Back door network entry

11:05 Con: Intellectual property
Lumimate torch video: youtu.be/DAnosimSZlE

12:39 Con: Invasive advertising
The 3D Printing Zone video on Creality K1 and app: youtube.com/watch?v=FPjTeTDb7r8

13:13 Con: Surprise switch to a subscription model
https://www.whichcar.com.au/news/bmw-australia-introduces-subscription-based-features
https://www.carexpert.com.au/car-news/toyota-connected-services-arrive-with-subscription-plans

13:56 Conclusion

Graphics credits:
Router - pixabay.com/vectors/router-wireless-network-connection-157597
Server - commons.wikimedia.org/wiki/File:Server-multiple.svg
Cloud - creazilla.com/nodes/3165364-clouds-clipart
Laptop - pixabay.com/vectors/laptop-computer-technology-business-1295373
Data centre: pixabay.com/illustrations/ai-generated-data-centre-computer-7957987
Privacy: pixabay.com/illustrations/keyboard-privacy-computer-keyboard-895556
Hacker: pixabay.com/vectors/hacker-computer-programming-hacking-5471975
Clown: creazilla.com/nodes/3156166-clown-clipart
Call centre: pixabay.com/illustrations/call-center-phone-service-help-1015274

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech