Test Etch and cut xTool D1 - Off the Cuff - Wacky Wood Works Wacky Wood Works 2023-02-18 | Subscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Simple Glove Hanger - Off the Cuff - Wacky Wood Works Wacky Wood Works 2023-02-11 | This week I make a simple glove hanger to help organise our gloves. All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Started tp clear the junk corner it going to be a mission Wacky Wood Works 2023-01-13 | started clear the junk corner... its going to be a mission...
Mighty Mitres Wacky Wood Works 2023-01-08 | Not 100% happy with these mitres as one of the boards had a bow in it that didn't see till after I started the glue up
Just planing some wood to see what I got. Boring stuff. Wacky Wood Works Wacky Wood Works 2023-01-07 | Exactly as the title says... just planing wood to see what I got... no talking no music... just planing... lolAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Comprehensive small/tiny work shop tour 2023 - Off the Cuff - Wacky Wood Works Wacky Wood Works 2023-01-03 | An updated comprehensive small work shop tour 2023.Tools I Usewackywoodworks.co.nz/www/workshop/tools-i-useVirtual tourwackywoodworks.co.nz/www/?da_image=5353All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
xTool D1 Etching Clear Acrylic - Off the Cuff - Wacky Wood Works Wacky Wood Works 2022-11-21 | Just a quick video of the xTool D1 10 Watt Laser etching clear acrylic... the trick put a black piece of paper behind it. I am going to try different colours but off the bat the black workedLightburn Settings was speed 1000 (mm/m) and Power 90% and a single pass.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Revenge of the 5th - Darth Maul - Star Wars Day - Wacky Wood Works Wacky Wood Works 2022-05-04 | Not quite Star Wars day of "May the 4th" however it is "Revenge of the 5th". This time I cut Darth Maul from Star Wars and I even paint him. It came out surprisingly better than I thought it would.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Song: Running from the DarknessDownload: soundclick.com/share.cfm?id=14419759Subscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
ANZAC Day Remembrance project 2022 - Off the Cuff - Wacky Wood Works Wacky Wood Works 2022-04-24 | ANZAC Day Remembrance project 2022 All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Pot Plant Planter Boxes - Off the Cuff - Wacky Wood Works Wacky Wood Works 2022-02-08 | So a few weeks ago I made some pot plant planter boxes with a bench seat in between them for my partners parents wedding anniversary... apparently I made the so well I have to make more for ourselves. All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Merry Christmas 2021 - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-12-24 | Sorry I have not made a proper Christmas project video, I haven't had time due to work etc... but I hope to have a few projects and "what I have been upto" videos coming up.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Steampunk Mask Display Case - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-10-25 | So this week I make a case for my Steampunk Mask. With some steampunk, and LED lights and even some leather... Extra fancy :-)All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Coffee Table with Steampunk Display Part 2- Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-10-18 | So this week I finally finish the steampunk display coffee table. Was fun putting all the steampunkl bits and bobs, and gizmos together.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Steampunk Display Coffee Table - Part 1 - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-10-03 | So this time around I make a display coffee table to display my steampunk rifle. All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksReddit: reddit.com/r/WackyWoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Simple Utility Table - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-09-05 | So this week I make a simple utility table to store dog food and various other things... What did I forget...?I forgot the short side runner so I quickly pocket hole them together... The lower shelf can be adjusted if required.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkReddit: reddit.com/r/WackyWoodWorksInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
2 for the price of one - French Cleat swap out system - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-08-26 | So in this exciting video, I make a simple "tool well" for my bench as well as I finally make the bench extension on the french cleat swap out system that I have talked about for a while.See more about how I did the jointer: wackywoodworks.co.nz/www/tool-well-bench-extensionAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
What Have I been Up to. - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-08-22 | So what have I actually been up to over the last few weeks...All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Apparently I cant read. - I make a frame for my foam tool holder - Off the Cuff Wacky Wood Works 2021-08-20 | So this week I make a frame for my foam tool holder and hang it on the french cleat.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Drill Press Corner Fence #WoodJigs21 - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-08-18 | So I need a fence for my dill press but I have an engineers drill press with the moving table bed so I need a different system. #WoodJigs21Fixit Fingers #WoodJigs21 - Aussie Winter 2021 Maker Challenge The Challengeyoutube.com/watch?v=QC-a6xU8fkMUpdateyoutube.com/watch?v=lyCFw6glwKEChallenge Play Listyoutube.com/watch?v=QC-a6xU8fkM&list=PLfJXcxjEOb3Kj_Q6WD2amRw1VBgulwXXfAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Purge has begun - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-08-15 | Well I have got the skip coming today and the purge is happening and we are purging big time. Totally sick of the mess... sigh! lolwackywoodworks.co.nz/www/the-purge-continueswackywoodworks.co.nz/www/the-clean-up-2Subscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
#WoodJigs21 - Right Angle Clamp Jig - Wacky Wood Works Wacky Wood Works 2021-07-16 | This is my entry to Fixit Fingers #WoodJigs21 - Aussie Winter 2021 Maker Challenge Launch Yes I know I am a Kiwi but whatever... ;-)I say 19mm ply when in fact it is 25mm ply...00:00 - Trimming Off Cuts 01:10 - Intro01:23 - The Idea01:43 - Marking Out02:26 - Drilling clamp holes03:01 - Final cut of angle jig03:49 - Test clamp idea. Will it work.04:56 - Scroll saw05:31 - Every ones favorite SANDING and filing smoothing and making pretty looking.06:44 - Explanation demonstration on different clamps.07:03 - Won't glue squeeze out stick to it.07:14 - Entry to #WoodJigs2107:25 - Kia Kaha07:29 - Samples07:49 - OutroTemplatewackywoodworks.co.nz/www/product/right-angle-clamp-jigThe Challengeyoutube.com/watch?v=QC-a6xU8fkMUpdateyoutube.com/watch?v=lyCFw6glwKEChallenge Play Listyoutube.com/watch?v=QC-a6xU8fkM&list=PLfJXcxjEOb3Kj_Q6WD2amRw1VBgulwXXfAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Storage Container Cabinet. - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-07-10 | So I finally finish the storage container shelf cabinet thingy... The free bench space is ready for a new tool. I just hope it fits.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Mum remembrance plaque. - Off the Cuff - Wacky Wood Works Wacky Wood Works 2021-07-03 | I make these "Mum Remembrance Plaques" for my sisters as our Mum recently past away. You can use the template to cut out any photo you wish and then hang on the wall. Mum will be with you always.Template can be found herewackywoodworks.co.nz/www/product/mum-remembrance-plaqueAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Storage Container Holders - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-06-26 | I know I said it probably wouldn't happen, but I decided to make it happen. I make new storage container holders to hold all my containers. I am not going to decommission my old ones just yet has I have a habit of I may buy more.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
So I add some shelves to my mitre saw stand - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-06-19 | So this week I add some custom shelves to my mitre saw stand for extra storage and since I have no room for a fancy mitre saw station I thought this the next best thing.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Mitre Slots for Out feed table - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-06-12 | MKIII upgrade to the out feed table raising slightly and then making sure that the mitre slots are still clear. This is probably the last video I will do in the out feed table.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Outfeed table Upgrade - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-06-07 | One of my viewers gave me a good idea to support the back end of the outfeed table with some threaded rod and nuts and a plates to make a foot.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
I finally make an out feed table - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-06-06 | So I finally make an out feed table for the table saw. I knew all the issues I encountered before I even started, which is one of the reasons I put the project off. However I worked through the problem and came up with a solution I will call it "Mark I", I have already thought of a minor upgrade to it basically raising the last 5 or 6 mm with out having to router in the mitre slots.Blogwackywoodworks.co.nz/www/out-feed-tableAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Toolbox tidy Upgrade - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-05-30 | So I got sick of my tool box being messy, so I bought some and tidied up some of my draws in my tool box.Blog Pagewackywoodworks.co.nz/www/4150-2Kincrome "Custom Cut Foam" can be bought from Bunnings Warehousebunnings.co.nz/kincrome-custom-cut-foam_p0131564Purge of toolswackywoodworks.co.nz/www/purge-of-toolsAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Small/Tiny Work Shop Tour 2021 - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-05-23 | This week I will take you around my small basement workshop on a guided tour... A few things have changed since my last tour which was in 2017. But like many other small wood shop owners we all say, "proves it can be done. You don't need a mega shop to have fun or to make stuff." I make use of the space I have.Tools I Usewackywoodworks.co.nz/www/workshop/tools-i-useAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Kreg - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-05-09 | So I bought the "Kreg Accu-Cut" and the "Kreg Rip-Cut" for the circular saws, I also bought the "Kreg Precision Bandsaw Fence".I also have other Kreg Jigs and bits and bobs...wackywoodworks.co.nz/www/kreg/ All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Kit build from Incredi-Builds of an X-Wing - Wacky Wood Works. Wacky Wood Works 2021-05-02 | I built a Incredi-Builds X-Wing fighter. It is all laser cut out and you just have to assemble it. While it was fiddley putting it together it was pretty easy to make. Project Page on our websitewackywoodworks.co.nz/www/kit-build-from-incredi-builds-of-an-x-wingSee the rest of the collection herewackywoodworks.co.nz/www/star-warsAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
The Last Post - ANZAC Day Remembrance Project - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-04-24 | Every year since I started this channel I have done a simple ANZAC day project this year is no different.They shall grow not old, as we that are left grow old:Age shall not weary them, nor the years condemn.At the going down of the sun and in the morning,We will remember them.ANZAC Day is a national day of remembrance in Australia and New Zealand that broadly commemorates all Australians and New Zealanders "who served and died in all wars, conflicts, and peacekeeping operations" and "the contribution and suffering of all those who have served". Observed on 25 April each year, Anzac Day was originally devised to honour the members of the Australian and New Zealand Army Corps (ANZAC) who fought at Gallipoli against the Ottoman Empire during World War I. Anzac Day is also observed in the Cook Islands, Niue, Pitcairn Islands, and Tonga, and previously was a national holiday in Papua New Guinea and Samoa.Template can be found here.wackywoodworks.co.nz/www/index.php/product/anzac-2021-the-last-postAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
I bought Garden Tools - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-04-18 | So I bought some garden tools. No a review yet... but on first use they did what I wanted them to do...aegpowertools.co.nzAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Puppy Love Ornament - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-04-05 | This week I make a scroll saw ornament and I call it Puppy Love Get the template herewackywoodworks.co.nz/www/index.php/product/puppy-love-ornamentAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Lets Talk - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-02-15 | What is the channel doing, Ask me questions for a Q & A. Update wackywoodworks.co.nz/www/welcome/linksoh and I made a shelf for the planner.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Replacing base of a fan - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-02-05 | This time I make and replace a broken fan base. No not you guys, but a real fan base.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Pruning Saw - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-01-31 | This time I make a pruning saw out of an old Bandsaw Blade and some rimu wood.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Shelf & Router Bit Holder - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2021-01-05 | Well this time I make a simple shelf for the shop and some simple router bit holders to well, hold router bits. All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
The Target - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2020-12-26 | Hope you all had a great Xmas and have a safe and happy new year. Tell us what you did for christmas...All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Work Work Work - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2020-11-28 | Since I have been busy at work... and the few other videos at work have been well received, I put together another quick video. Sorry I have not done any videos from my home workshop or woodworking videos... They are coming I promise... (Just not sure when.)Proof I use the handplane as well... lolhttps://fb.watch/21vUTvvdR4/All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
More Renovations - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2020-08-23 | All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Sumos Projects Scrap Wood Challenge 2020 - Making a Square - #spswc2020 Wacky Wood Works 2020-08-07 | Sumo's Projects Scrap Wood Challenge. So I decided to make a square... It is hip to be square.#spswc2020Sumo's Projects Scrap Wood Challenge 2020 // spswc2020youtube.com/watch?v=qcyxUMNEYfcAll Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaWebsite: http://www.wackywoodworks.co.nzPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Work work work - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2020-07-16 | Another random day at work as a plastic fabricator. I regularly get requests for more. So here we are... work work work.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpSubscribe to WWW Youtube channelyoutube.com/c/WackywoodworksCoNz?sub_sonfirmation=1Other social mediaPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Shop Update - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2020-07-09 | All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Upgrade Scroll Saw with Pegas - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2020-07-02 | I finally upgrade my Carbatec (Excalibur) Scroll saw with Pegas Blade head cucks. The idea is that the new parts are 40% lighter which reduces vibration which in turn reduces wear and tear. Time will tell.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Nail Gun Holder - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2020-06-25 | This week I make a nail gun holder... but it is one of those projects that nothing goes right but the project still works...All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
Cubby Corner done and dusted - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2020-06-18 | So I finally do the cubby corner of the workshop. The part that I have been dreading... All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
New Spindle Sander... where am I going to put it - Off the Cuff - Wacky Wood Works. Wacky Wood Works 2020-06-11 | So previously I a said I new tool was coming and it came sooner than I thought. This is not an unboxing video but a simple french cleat to hold the new sander and a quick sneak into some of my plans for the shop.All Music is copyright by "Nighthawk" written and produced by "Nighthawk" and is released under a Creative Commons Attribution License (creativecommons.org/licenses/by/4.0)Artist: Nighthawk Website: http://www.wackywoodworks.co.nz/music/songs.phpPinterest: http://www.pinterest.com/nighthawknzTwitter: twitter.com/Wacky_WoodWorksFacebook: facebook.com/wackywoodworksFacebook Group: facebook.com/groups/WackyMakersYoutube: http://www.youtube.com/c/WackywoodworksCoNz Lumberjocks: http://lumberjocks.com/NighthawkInstructables: http://www.instructables.com/member/Wacky_WoodWorksDisclaimer: Any video or tutorial are intended for entertainment and inspiration purpose only and not educational. Woodworking and power tools can be dangerous. I may use a tool in a certain way, does NOT mean you should. Always seek professional advice or training and please read any manual before using any power tool. If you have any uncertainty before performing any woodworking procedure, stop and learn a safer alternative method. Do not attempt anything simply because you saw it via wackywoodworks.co.nz I do not accept any responsibility for any injuries you may incur from replication of what you see in these videos.
