Project Anonymous
GUIDE TO THE NEW Monport ONYX R 55W CO2 Laser Engraver | UNBOX & TEST
updated
⚡️USE CODE: Project5 for 5% off everything on the OMTech website!⚡️
OMTech Website:
https://omtech.com?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Parisian Cafe - Aaron Kenny
DISCOUNT CODE: Anonymous10 ⚡️
Link to the Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
⭐️Details on this Laser⭐️
Monport Effi9S Upgraded 90W CO2 Laser Engraver & Cutter with Autofocus and Built-in Water Chiller
Rated Power: 90W
Max. Engraving Speed: 1400mm/s(55.1ips)
Engraving Area: 900 x 600mm(36 x 24 in.)
Focus Mode: Autofocus
Compatible Operating Systems: Windows / macOS
Compatible Software: LightBurn & RDworks
Cooling system: Built in CW5200 water chiller
Fume Exhaust: 550W Duct Fan,1125 m³/h
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
🎬 PRODUCT LINKS🎬
Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
🎶MUSIC🎶
Grind - Andrew Huang
⚠️Disclaimer: We were sent the product for review. Our affiliate links may help us earn a small commission from qualifying purchases. We appreciate the support to continue to create new content.
⚡️USE DISCOUNT CODE: “PROJECT5OFF” for 5% OFF Longer Machines ⚡️
🎬 PRODUCT LINKS🎬
Longer B1 40W: longer3d.com/products/longer-laser-b1-40w-44-48w-output-power?ref=longerlaserAnonymous
Longer Website: longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
EU LINK to laser: eu.longer.net/products/longer-laser-b1-40w-44-48w-output-power?ref=longerlaserAnonymous
💻SOFTWARE💻
LightBurn
LaserBurn
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews: youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
Longer Videos: youtube.com/playlist?list=PLtQ8IvTMaEGKlphZxU_-SMZz160bOmxMH
⏱TIMESTAMPS⏱
0:00 Intro
0:13 Unboxing
2:26 Assembling
7:46 LightBurn Set Up
10:28 Cut & Engraves Test 1
13:59 Cut & Engrave Test 2
15:22 Increasing Homing Speed
16:04 Speed Test
17:02 Our Thoughts
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Claim To Fame - The Grey Room _ Clark Sims
Toy Shopping - Jeremy Korpas
Sonatina No 2 in F Major Rondo - Joel Cummins
Gaiety in the Golden Age - Aaron Kenny
Jazz In Paris - Media Right Productions
Jumpy Pants - Freedom Trail Studio
Start Vacuum - Karneef
Mississippi Mover - Everet Almond
Jesse's Carnival Waltz - The Great North Sound Society
Jet Setter - Sarah, The Illstrumentalist
Good Days - Yung Logos
⚡️USE CODE: Project5 for 5% off everything on the OMTech website!⚡️
OMTech Website:
https://omtech.com?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
💻SOFTWARE💻
LightBurn
⏱TIMESTAMPS⏱
0:00 Intro
0:15 Unboxing
2:59 Laser Set Up
3:32 LightBurn Set Up
6:18 Finding the Focus
7:47 Verifying Laser Accuracy
9:11 Painted Aluminum Test
11:43 Deep Engrave Slate
13:41 Color Engraving
17:39 Our Thoughts
20:21 Outro
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Win The Battle Win The War - Everet Almond
Losing Your Marbles - The Soundlings
Defying Gravity - Density & Time
Stick The Landing - Everet Almond
Saving the World - Aaron Kenny
Ruff Money - The Grey Room _ Clark Sims
Speedy Gonzalo - Inaban
By the Fireplace - TrackTribe
OMTech Website:
https://omtech.com?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
Stay tuned for our upcoming unbox, test, and review video on the OMTech MOPA 60W Split Fiber Laser Engraver with 6.9" x 6.9" Working Area. Stay crafty!
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
🎶MUSIC🎶
Everybody Get Up - Everet Almond
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
⚡️FOR 10% OFF your purchase of this machine and Monport Lasers USE DISCOUNT CODE: Anonymous10 ⚡️
Link to the Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
⭐️Details on this Laser⭐️
Monport Effi9S Upgraded 90W CO2 Laser Engraver & Cutter with Autofocus and Built-in Water Chiller
Rated Power: 90W
Max. Engraving Speed: 1400mm/s(55.1ips)
Engraving Area: 900 x 600mm(36 x 24 in.)
Focus Mode: Autofocus
Compatible Operating Systems: Windows / macOS
Compatible Software: LightBurn & RDworks
Cooling system: Built in CW5200 water chiller
Fume Exhaust: 550W Duct Fan,1125 m³/h
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
🎬 PRODUCT LINKS🎬
Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
Ukulele kit: amzn.to/45ZaDKn (as an Amazon associate we may earn from purchases using our links)
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
LightBurn Camera: youtube.com/watch?v=meQNmb6nCNc&list=PLtQ8IvTMaEGILLP4LmQQXAzrfMQZgdu2g&index=3
Monport Effi9s 90W Videos: youtube.com/playlist?list=PLtQ8IvTMaEGILLP4LmQQXAzrfMQZgdu2g
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⏱TIMESTAMPS⏱
0:00 Intro
0:11 Preparing Kit
0:58 Body’s Design
1:28 Engraving Body
2:48 Designing Headstock
4:02 Centering Design
5:22 Engraving Headstock
6:47 Sanding
7:32 Attaching Pieces
8:15 Staining
9:38 Assembling
12:02 Final Results/Outro
🎶MUSIC🎶
Ponte de Abril - Steve Adams
Movin' Up - Dan Lebowitz
Jesse's Carnival Waltz - The Great North Sound Society
Hot Water - National Sweetheart
Scale The Mountain - Density & Time
The Road To Mordor - Ezra Lipp
Vacation Uke - ALBIS
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
⚡️FOR 10% OFF your purchase of this machine and Monport Lasers USE DISCOUNT CODE: Anonymous10 ⚡️
Link to the Monport GM60 Fiber Laser Engraver:
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
🎬 PRODUCT LINKS🎬
GM60 Fiber Laser: monportlaser.com/products/gm60-mopa-fiber-laser-machine?sca_ref=4451934.of5mkLvEvQ
Fiber Laser Enclosure: monportlaser.com/products/monport-laser-engraver-enclosure-for-split-integrated-fiber-laser?sca_ref=4451934.of5mkLvEvQ
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Fiber Laser Videos: youtube.com/playlist?list=PLtQ8IvTMaEGKS44hN5P7ycS-WCHDuB-LE
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
⏱TIMESTAMPS⏱
0:00 Intro
0:19 Unboxing
1:28 A Peek in the Laser
2:02 Assembling
3:21 Manual Notes
3:40 Setting Up LightBurn
6:55 Verifying Laser Accuracy
8:33 Cutting & Engraving Painted Aluminum
10:16 Stainless Steel Material Color Test
14:29 Engraving Colored Logo
16:07 Deep Engraving Slate
17:26 Thoughts + Discount Code
🎶MUSIC🎶
Down by the Riverside - E's Jammy Jams
Claim To Fame - The Grey Room _ Clark Sims
Valiant - Density & Time
Toy Shopping - Jeremy Korpas
Ratatouille's Kitchen - Carmen María and Edu Espinal
Frodo's Quest - Ezra Lipp
Move Up to the Mountains - Aaron Lieberman
Canal 3 - Quincas Moreira
Swing Haven 5 - Denver - Reed Mathis
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
⚡️Use code Anonymous100 at checkout for $100 off WeCreat Vision Diode Units! wecreattechltd.pxf.io/N9PLaq ⚡️
#wecreatvision #wecreat #laserengraving #diodelaser
🎬 PRODUCT LINKS🎬
WeCreat Vision: wecreattechltd.pxf.io/N9PLaq
IR Module Accessory: http://wecreattechltd.pxf.io/Dyav0n
🎬VIDEO LINKS🎬
Unbox/Set Up/Reviewing the WeCreat Vision Video:
youtu.be/FcolRccIRho
WeCreat Vision Playlist:
youtube.com/playlist?list=PLtQ8IvTMaEGLNn4m8iaGHwTbGF_OAE7_8
Laser Engraving Playlist:
youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
💻SOFTWARE💻
WeCreat Make It
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
⏱TIMESTAMPS⏱
0:00 Intro
0:34 Creating Card Design
2:56 Cutting Card Pieces
5:29 Assembling Card
6:20 Creating Banner Design
7:17 Laser Cutting Banner
9:53 Assembling Banner
11:15 Results
🎶MUSIC🎶
Chromatic Rag - Mini Vandals
Level - The Grey Room _ Density & Time
Turtleneck - TrackTribe
Frodo's Quest - Ezra Lipp
The Joint is Jumpin - Joel Cummins
Keep Climbing - The Soundings
Jazz In Paris - Media Right Productions
The Thought of You - TrackTribe
⚡️FOR 10% OFF your purchase of this machine and Monport Lasers USE DISCOUNT CODE: Anonymous10 ⚡️
Link to the Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
⭐️Details on this Laser⭐️
Monport Effi9S Upgraded 90W CO2 Laser Engraver & Cutter with Autofocus and Built-in Water Chiller
Rated Power: 90W
Max. Engraving Speed: 1400mm/s(55.1ips)
Engraving Area: 900 x 600mm(36 x 24 in.)
Focus Mode: Autofocus
Compatible Operating Systems: Windows / macOS
Compatible Software: LightBurn & RDworks
Cooling system: Built in CW5200 water chiller
Fume Exhaust: 550W Duct Fan,1125 m³/h
#lasercutting #laserengraving #monportlaser #halloweendecor
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
🎬 PRODUCT LINKS🎬
Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
LightBurn Camera: youtu.be/meQNmb6nCNc
Monport Effi9s 90W: youtube.com/playlist?list=PLtQ8IvTMaEGILLP4LmQQXAzrfMQZgdu2g
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
⏱TIMESTAMPS⏱
0:00 Intro
0:25 Creating Design
5:19 Materials We’re Using
5:40 Laser Cutting Pieces
10:13 Sanding Pieces
10:38 Assembling
11:46 Finishing Wood
12:23 Outro
🎶MUSIC🎶
Happy Haunts - Aaron Kenny
Fun House - Coyote Hearing
Lunge Act - Freedom Trail Studio
Mysterious Strange Things - Yung Logos
Spatial Entaglement - The Grey Room _ Density & Time
Pick Up - Adam MacDougall
Spider Legs - Dyalla
Murder Mystery - Sir Cubworth
Corny Candy - The Soundlings
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
WeCreat Back to School Sale
Save Up to $2,000 on Vision
Save Up to 57% on Vista
Save Up to $2,100 on Vision Pro
In todays #shorts , let’s make a custom engraved hall pass using the beginner friendly and autofocusing/autolifting WeCreat Vision 40W Diode Laser Engraver! Also, to create a design for the hall pass, choose our engraving style, and automatically adjust settings; we’ll use the easy to use software, WeCreat Make It. I hope you enjoy the video!
#wecreatvision #wecreat #laserengraving #diodelaser
🎬 PRODUCT LINKS🎬
WeCreat Vision: wecreattechltd.pxf.io/N9PLaq
IR Module Accessory: http://wecreattechltd.pxf.io/Dyav0n
🎬VIDEO LINKS🎬
Unbox/Set Up/Reviewing the WeCreat Vision Video:
youtu.be/FcolRccIRho
IR Module Set Up & Test Video: youtube.com/watch?v=a2GEFFhE5sk
WeCreat Vision Playlist:
youtube.com/playlist?list=PLtQ8IvTMaEGLNn4m8iaGHwTbGF_OAE7_8
Laser Engraving Playlist:
youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Canal 3 - Quincas Moreira
⚡️FOR 10% OFF your purchase of this machine and Monport Lasers USE DISCOUNT CODE: Anonymous10 ⚡️
Link to the Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
⭐️Details on this Laser⭐️
Monport Effi9S Upgraded 90W CO2 Laser Engraver & Cutter with Autofocus and Built-in Water Chiller
Rated Power: 90W
Max. Engraving Speed: 1400mm/s(55.1ips)
Engraving Area: 900 x 600mm(36 x 24 in.)
Focus Mode: Autofocus
Compatible Operating Systems: Windows / macOS
Compatible Software: LightBurn & RDworks
Cooling system: Built in CW5200 water chiller
Fume Exhaust: 550W Duct Fan,1125 m³/h
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
🎬 PRODUCT LINKS🎬
Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
Adapter: amzn.to/4lZGAt6
USB Cable: amzn.to/4lXLLJS
Zip Tie Mounts: amzn.to/4l7RJXb
Bolts: amzn.to/45guX9P
3m double sided tape: amzn.to/40FWPmu
💻SOFTWARE💻
LightBurn
Thingiverse
Ultimaker Cura
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⏱TIMESTAMPS⏱
0:00 Intro
0:31 Unboxing
1:25 Downloading Camera Mount File
2:42 3D Printing & Assembling Mount
3:59 Installing Camera
8:47 Calibrating & Aligning Camera
11:57 Testing Camera’s Accuracy
13:34 Test Project
15:24 Our Thoughts & Outro
🎶MUSIC🎶
Blues Infusion - Quincas MoreiraThey Bop - Freedom Trail Studio
Ella Vater - The Mini Vandals
Swing Haven 5 - Denver - Reed Mathis
Panpsychic - Alex Hamlin
Contender - TrackTribe
Busy City - TrackTribe
Ratatouille's Kitchen - Carmen María and Edu Espinal
Bach Cello Suite No. 1, G Major, Prelude - Cooper Cannell
By the Fireplace - TrackTribe
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
⚡️Use code Anonymous100 at checkout for $100 off WeCreat Vision Diode Units! wecreattechltd.pxf.io/N9PLaq ⚡️
#wecreatvision #wecreat #laserengraving #diodelaser
🎬 PRODUCT LINKS🎬
WeCreat Vision Rotary Pack:
WeCreat Vision: wecreattechltd.pxf.io/N9PLaq
IR Module Accessory: http://wecreattechltd.pxf.io/Dyav0n
🎬VIDEO LINKS🎬
Unbox/Set Up/Reviewing the WeCreat Vision Video:
youtu.be/FcolRccIRho
IR Module Set Up & Test Video: youtube.com/watch?v=a2GEFFhE5sk
WeCreat Vision Playlist:
youtube.com/playlist?list=PLtQ8IvTMaEGLNn4m8iaGHwTbGF_OAE7_8
Laser Engraving Playlist:
youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
⏱TIMESTAMPS⏱
0:00 Intro
0:28 Unboxing + Package Contents
1:00 Setting Up Rotary
2:35 Laser Marking Stainless Steel w/ IR Module
7:06 Engraving Silicone Ring w/ 40W
11:35 Engraving White Stainless Steel w/ 40W
13:54 Final Thoughts
16:33 Project Results/Outro
🎶MUSIC🎶
Scale The Mountain - Density & Time
Accordion - Andrew Huang
Midnight Special - E's Jammy Jams
Sunshine Samba - Chris Haugen
Keep Climbing - The Soundings
Start Vacuum - Karneef
Pirouette - Asher Fulero
Shine on Harvest Moon - E’s Jammy Jams
In today’s video, we’ll unbox, give the ultimate guide to set up, test cutting/engraving capabilities, and review the super fast and powerful Monport Effi9S Upgraded 90W CO2 Laser Engraver & Cutter with Autofocus and Built-in Water Chiller. Hopefully this video can help you either set up your own laser or make a decision on if this machine is worth it for you! In order to set up this massive high speed CO2 machine we’ll have to level it, fill the the industrial water chiller, set up the 36 by 24 inch workspace (install aluminum blade platform and honeycomb bed), install Fume Exhaust: 550W Duct Fan, remove protective film, align mirrors, and connect with LightBurn. Additionally, to test this air assisted & integrated red light indication laser engraver machine, we’ll see how many passes and at what power it takes to cut through 1/4 plywood and 5mm acrylic. At a fast max engraving speed of 1400 mm/s, we’ll see how quick we can cut a 30 inch wide piece of material. I hope you enjoy the video!
#monportlaser #lasercutting #laserengraving #monportco2laser
⚡️FOR 10% OFF your purchase of this machine and Monport Lasers USE DISCOUNT CODE: Anonymous10 ⚡️
Link to the Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
⭐️Details on this Laser⭐️
Monport Effi9S Upgraded 90W CO2 Laser Engraver & Cutter with Autofocus and Built-in Water Chiller
Rated Power: 90W
Max. Engraving Speed: 1400mm/s(55.1ips)
Engraving Area: 900 x 600mm(36 x 24 in.)
Focus Mode: Autofocus
Compatible Operating Systems: Windows / macOS
Compatible Software: LightBurn & RDworks
Cooling system: Built in CW5200 water chiller
Fume Exhaust: 550W Duct Fan,1125 m³/h
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⏱TIMESTAMPS⏱
0:00
0:10 Unboxing
1:56 Package Contents
3:36 Installing Exhaust Fan
4:29 Setting Up Industrial Chiller
5:56 Leveling Machine
6:22 Setting Up Laser’s Workspace
8:14 Aligning Red Dot Pointer
8:59 Removing Protective Film
9:46 Aligning Mirrors
11:14 Configuring LightBurn
14:00 Engraving Wood (Material Test)
17:36 Laser Cutting Speed Test
19:37 Our Thoughts
🎶MUSIC🎶
Down by the Riverside - E's Jammy Jams
Backwoods BBQ - Chris Haugen
Hopping Trains - Nathan Moore
The Beast Within - The Soundings
The Gentlemen - DivKid
Toy Shopping - Jeremy Korpas
Dance for Wind Trio - Sir Cubworth
Proctor - Topher Mohr and Alex Elena
Chromatic Rag - Mini Vandals
Speedy Gonzalo - Inaban
Treat Yourself - Dyalla
Claim of Thrones - RKVC
Sonatina No 2 in F Major Allegro - Joel Cummins
Chariots of War - Aakash Gandhi
Never Slow Me Down - Everet Almond
Happytoseeyou - Sarah, The Illstrumentalist
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
⚡️FOR 10% OFF your purchase of this machine and Monport Lasers USE DISCOUNT CODE: Anonymous10 ⚡️
Link to the Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
⭐️Details on this Laser⭐️
Monport Effi9S Upgraded 90W CO2 Laser Engraver & Cutter with Autofocus and Built-in Water Chiller
Rated Power: 90W
Max. Engraving Speed: 1400mm/s(55.1ips)
Engraving Area: 900 x 600mm(36 x 24 in.)
Focus Mode: Autofocus
Compatible Operating Systems: Windows / macOS
Compatible Software: LightBurn & RDworks
Cooling system: Built in CW5200 water chiller
Fume Exhaust: 550W Duct Fan,1125 m³/h
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
🎶MUSIC🎶
GTA Type Beat - Dyalla
⚡️Use code Anonymous100 at checkout for $100 off WeCreat Vision Diode Units! wecreattechltd.pxf.io/N9PLaq ⚡️
#wecreatvision #wecreat #laserengraving #diodelaser #lasermarkingmachine
🎬 PRODUCT LINKS🎬
WeCreat Vision: wecreattechltd.pxf.io/N9PLaq
IR Module Accessory: http://wecreattechltd.pxf.io/Dyav0n
🎬VIDEO LINKS🎬
Unbox/Set Up/Reviewing the WeCreat Vision Video:
youtu.be/FcolRccIRho
Laser Engraving Playlist:
youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
⏱TIMESTAMPS⏱
0:00 Intro
0:26 Unboxing/Package Contents
1:17 Switching Laser Modules in the Vision
4:23 Setting Up IR Module in WeCreat Make It
4:40 Creating Design
6:32 Engraving Stainless Steel
8:16 Engraving Brass
10:16 Engraving Anodized Aluminum
11:36 Engraving Leatherette
12:32 Engraving Colored Acrylic
13:23 Silicone Engraving & Our Thoughts
🎶MUSIC🎶
They Bop - Freedom Trail Studio
Swing Haven 6 - New Orleans - Reed Mathis
Olde Salooner Blues - Midnight North
Jazz In Paris - Media Right Productions
Don't Wanna Be - Kwon
Ratatouille's Kitchen - Carmen María and Edu Espinal
Taking Chances - The Soundings
Spoons - Telecasted
Night on the Town - TrackTribe
By the Fireplace - TrackTribe
longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
In today’s short, we’ll be previewing our full length video where we unbox, try/test out, set up with LightBurn (through wifi and USB), set up with the free LONGER LaserBurn software, and review the NEW Longer Ray5 Mini 2.5W high precision LASER engraving machine. This beginner friendly mini laser engraving machine is affordable and is targeted to someone looking for an entry level machine. This is a tiny and precise engraver for a hobbyist who needs a very small frame to easily store (due to possibly a full size being impractical) with the ability to engrave small and delicate items with lots of detail. We’ll test this machine’s engraving capabilities on denim, wood, canvas, and painted metal/aluminum. Also, we’ll try cutting card stock with this inexpensive, wifi compatible, pre-assembled, and easy to use laser. Thanks for watching!
🎬 PRODUCT LINKS🎬
Longer Ray5 Mini: longer3d.com/products/longer-ray5-mini-laser-engraver?_pos=2&_sid=a2d95f7ce&_ss=r&ref=longerlaserAnonymous
Longer Website: longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
EU LINK: eu.longer.net/?ref=longerlaserAnonymous
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
Mini Ray5 on Amazon: amzn.to/4lgTx1f
Laser Enclosure We Use: amzn.to/4b7JTbn
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
💻SOFTWARE💻
LightBurn
LaserBurn
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews: youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
#longerlaser #laserengraving
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Jumpy Pants - Freedom Trail Studio
In today’s video, we’ll be using Creatorally’s 3 layer colored plywood to engrave a realistic owl image. We were able to achieve some amazing engraving results on this new, unique, colorful, and versatile high-quality natural basswood 8 pack of Scratch Plywood – 12"x12" Laser Engraving Sheet. The different colors Creatorally offers definitely make laser engraved wood projects look unique! Also, we found this material super easy to use because it is ready to engrave and easy to clean up. This product is designed for laser engraving, wood burning, and DIY craft projects to precisely peel away and reveal high contrast vibrant colors with no painting required. In order to engrave and achieve these really cool instant rich visual effects, we used our brand new LOKLIK iEngrave.
#Creatorally #laserengraving #loklikiengrave #htvront
🎬 PRODUCT LINKS🎬
3-Layer Colored Scratch Plywood: creatorally.com/products/creatorally-3-layer-colored-scratch-plywood-12x12-laser-engraving-sheet?ref=PROJECTANONYMOUS
LOKLiK iEngrave: htvront.pxf.io/zxBnAW
**EXCLUSIVE LIMITED TIME $20 OFF PRE-SALE Discount Code: IENG20**
Valid: 6/10-7/7 for the LOKLiK iEngrave: htvront.pxf.io/zxBnAW
(use of our links may earn us commission on qualifying purchases, thanks for your support!)
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Using Creatorally’s Glow-in-the-Dark Acrylic: youtu.be/fdoUAjf0Ufs
Using Creatorally’s Pre-Colored Plywood to Make an Eye Glass Stand: youtu.be/7FUMOsQnUaY
⏱TIMESTAMPS⏱
0:00 Intro
0:12 Product Overview
0:31 Testing Material
0:52 Creating Design
2:58 Engraving
4:20 Results
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Excess - Freedom Trail Studio
Canal 3 - Quincas Moreira
Ella Vater - The Mini Vandals
⚡️USE DISCOUNT CODE: “PROJECT5OFF” for 5% OFF Longer Machines ⚡️
longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
eu.longer.net/?ref=longerlaserAnonymous
🎬 PRODUCT LINKS🎬
Longer Ray5 Mini: longer3d.com/products/longer-ray5-mini-laser-engraver?_pos=2&_sid=a2d95f7ce&_ss=r&ref=longerlaserAnonymous
Longer Website: longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
Mini Ray5 on Amazon: amzn.to/4lgTx1f
Laser Enclosure: amzn.to/4b7JTbn
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
⏱TIMESTAMPS⏱
0:00 Intro
0:15 Unboxing
0:43 Package Contents
1:40 Setting Up Laser
2:23 Setting Up LightBurn
4:22 Material Test on Wood
6:20 Engraving Denim
7:50 Engraving Canvas
8:55 Laser Cutting Card Stock
9:55 LaserBurn Set Up
10:45 Engraving Painted Metal
13:33 Wifi w/ LightBurn
14:27 Our Thoughts
💻SOFTWARE💻
LightBurn
LaserBurn
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews: youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Keep Climbing - The Soundings
Up And At Em - Nathan Moore
Start Vacuum - Karneef
Time Slips By - Go By Ocean _ Ryan McCaffrey
Give My Regards To Broadway - Freedom Trail Studio
Rubber Dubs - Freedom Trail Studio
Homer Said - Dyalla
Jesse's Carnival Waltz - The Great North Sound Society
Contender - TrackTribe
**for $10 OFF at checkout for Products on Clawlab’s Website (clawlab.com/?ref=PROJECTANONYMOUS )**
Let’s make our first tufting project with the portable, easy to move, and easy store away handheld #clawlab Tufting Gun! In order to create our first ever rug, with no experience, we’ll be using the beginner friendly Clawlab Tufting Kit H1 which includes the not intimidating tufting gun, tufting frame, yarn, primary fabric, and secondary fabric/fabric for backing. We found this kit to be super fun and easy to use for our first experience as it included everything we needed to make our own custom personalized rug! Throughout our full length video we unboxed all of the products, assembled/set up the nail free frame with tension nobs, and used the 90% metal body tufting gun (weighing only 550g). I hope you enjoyed the preview compilation short!
Full Length Video: youtu.be/ohUUn_EpbPo
Thank you @clawlab_official for sending us the CLAWLAB Tufting Kit H1. We found this to be a great product for anyone looking to create rugs or other tufting projects! At any skill level, you can use this lightweight and beginner friendly product to express creativity in another way. Stay crafty :)
#clawlabtufting #clawlabproductreview
🎬 PRODUCT LINKS🎬
Tufting Kit: clawlab.com/products/clawlab-tufting-kit-h1?ref=PROJECTANONYMOUS
Clawlab: clawlab.com/?ref=PROJECTANONYMOUS
Happrun bluetooth projector: amzn.to/3FLcdXi
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Bop Walker - Freedom Trail Studio
In todays video, we’ll unbox, unpack, and review the all-in-one easy to use 40W Diode Laser Engraver by WeCreat. Additionally, we will cover how to set up this beginner friendly and auto-lifting desktop machine in the WeCreat Make It Software and LightBurn! Finally, we will also test out this versatile and fully enclosed laser's engraving and cutting capabilities on a variety of different types of materials (wood, painted aluminum, and acrylic)! This laser has many really cool features; it has FDA class 1 safety, a fully enclosed workspace, an integrated HD camera to use with the Make It software, autofocus, an auto lift function for engraving tall objects, an integrated exhaust fan, an air assist, and a powerful 40W laser module for cutting quickly and deeply as well as precisely engraving. I hope you enjoy the video!
#wecreatvision #wecreat #laserengraving #diodelaser
🎬 PRODUCT LINKS🎬
WeCreat Vision: wecreattechltd.pxf.io/N9PLaq
🎬VIDEO LINKS🎬
Laser Engraving Playlist:
youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews:
youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
⏱TIMESTAMPS⏱
0:00 Intro
0:33 Unboxing
1:09 Package Contents
2:44 Setting Up Laser
4:53 WeCreat Make It Software Set Up
8:13 Camera Calibration/Test
11:50 Test Array on Wood
15:05 Laser Cutting & Engraving Wood
18:14 Cutting & Engraving Acrylic
20:07 LightBurn Configuration
21:08 Engraving Painted Aluminum
24:03 Transport Mode
24:45 Our Thoughts
🎶MUSIC🎶
Island Life - Telecasted
Regulate - Dyalla
Sugar - Anno Domini Beats
Billy Goat Stomp - Joel Cummins
Mas Cafe - Casa Rosa
Good Energy - Dyalla
Country Rough - Everet Almond
Win The Battle Win The War - Everet Almond
Swipesy Cakewalk - E’s Jammy Jams
Gaiety in the Golden Age - Aaron Kenny
Blue Ribbons - TrackTribe
Dance for Wind Trio - Sir Cubworth
Sonatina No 2 in F Major Rondo - Joel Cummins
Greener Grass - Dyalla
Valid: 6/10-7/7 for the LOKLiK iEngrave: htvront.pxf.io/zxBnAW
FULL VIDEO: youtu.be/Ig4sbJBUVpY
In today’s short, we’ll preview our new video where we unboxed, assembled the cover/enclosure, set up with lightburn, set up with the LOKLiK software (mobile app), tested, and reviewed the LOKLiK iENGRAVE - Cover newly made by @loklik_official @htvront. This 10W diode laser engraving machine is currently available for pre-sale! In our full video, we engraved a variety of different materials (anodized aluminum, wood, and card stock) using LightBurn and the LOKLiK app to test the capabilities of this soon to be available laser. Hopefully our video guide will help you decide if this is the right safety conscious, budget friendly, and beginner friendly enclosed 10W diode laser engraving machine for you! Thanks for watching :)
#loklik #htvront #htvrontiengrave #loklikiengrave #laserengraving
🎬 PRODUCT LINKS🎬
LOKLiK iEngrave: htvront.pxf.io/zxBnAW
💻SOFTWARE💻
LightBurn
LOKLiK
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews: youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Sugar - Anno Domini Beats
** USE CODE: PROJECT10 for $10 OFF at checkout for Products on Clawlab’s Website: clawlab.com/?ref=PROJECTANONYMOUS **
(we may earn a small commission for qualifying purchases, thanks for your support!)
Thank you @clawlab_official for sending us the CLAWLAB Tufting Kit H1. We found this to be a great product for anyone looking to create rugs or other tufting projects! At any skill level, you can use this lightweight and beginner friendly product to express creativity in another way. Stay crafty :)
#clawlabtufting #clawlabproductreview
🎬 PRODUCT LINKS🎬
Tufting Kit: clawlab.com/products/clawlab-tufting-kit-h1?ref=PROJECTANONYMOUS
Clawlab: clawlab.com/?ref=PROJECTANONYMOUS
Gorilla Glue: amzn.to/45efokD
Happrun bluetooth projector: amzn.to/3FLcdXi
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
⏱TIMESTAMPS⏱
0:00 Intro
0:31 Unboxing
0:55 Assembling Frame
2:21 Fabric Set Up
3:25 The Tufting Gun
5:05 Drawing the Design
5:50 Threading
6:21 Project
10:37 Backing
12:29 Trimming
12:47 Finishing Touches
13:26 Final Results
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Billy Goat Stomp - Joel Cummins
Chica Linda - Quincas Moreira
Speedy Gonzalo - Inaban
Ride of the Valkyries (by Wagner) - Wagner
The New Order - Aaron Kenny
Valiant - Density & Time
Taking Chances - The Soundings
Baroque Coffee House - Doug Maxwell/Media Right Productions
All-in one kit -Sale Page price $719.99, after discount code price: $296 (offer ends Sept 22, 2025)
🎬 Check out our video covering this laser for more information: youtu.be/Ig4sbJBUVpY
In today’s video, we’ll be unboxing, assembling the cover/enclosure, setting up with lightburn, setting up with the LOKLiK software (mobile app), testing, and reviewing the LOKLiK iEngrave with the Enclosed Cover by @loklik_official @htvront available for pre-sale. In order to test the capabilities of this brand new 10W diode laser, we’ll be laser cutting and engraving wood, laser engraving anodized aluminum, and laser cutting card stock. Also, we tried out many of the built in tools of the free LOKLiK app to see how intuitive it is for laser engraving newbies. This includes testing the included clipart and material presets for different settings to use on different materials for fast engraving. Hopefully this video will help you decide if this is the right safety conscious, budget & beginner friendly enclosed 10W diode laser engraving machine for you! We hope you enjoy the video on this brand new enclosed diode laser engraver loaded with safety features by LOKLIK! #loklik #htvront #htvrontiengrave #loklikiengrave #laserengraving
🎬 PRODUCT LINKS🎬
LOKLiK iEngrave: htvront.pxf.io/zxBnAW (use of our links may earn us commission on qualifying purchases, thanks for your support!)
💻SOFTWARE💻
LightBurn
LOKLiK
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our Laser Reviews: youtube.com/playlist?list=PLtQ8IvTMaEGLRwZVu679sqkyyLQZGJhqe
⏱TIMESTAMPS⏱
0:00 Intro
0:21 Unboxing
2:15 Package Contents
3:20 Assembling Enclosure
6:15 Setting Up iEngrave w/ Accessories
9:39 Checking & Adjusting Belt Tension
10:09 Power Supply
10:53 LightBurn Set Up
12:19 Engraving Test
14:44 Adjusting Settings
16:44 LOKLiK App Overview
22:51 Engraving Anodized Aluminum
24:44 Laser Cutting Custom Card
29:46 Our Thoughts
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Touch - Anno Domini Beats
Ella Vater - The Mini Vandals
Portcullis - The Mini VandalsRegulate - Dyalla
Move Up to the Mountains - Aaron Lieberman
Powdered Waltz - The Mini Vandals
Messiah (by Handel) - Handel
Groove - Dyalla
Crab Cay - Cumbia Deli
Fine Dining - TrackTribe
Homer Said - Dyalla
Bodega Cat - Dyalla
Jazz In Paris - Media Right Productions
Funk It - Dyalla
The Center Isn't Holding - National Sweetheart
Mississippi Mover - Everet Almond
English Country Garden - Aaron Kenny
The Thought of You - TrackTribe
Jesse's Carnival Waltz - The Great North Sound Society
🎬 PRODUCT LINKS🎬
USE CODE “Anonymous10” for 10% OFF Monport MACHINES
Monport GI30 (similar fiber laser): monportlaser.com/collections/mopa-fiber-laser/products/gi30-mopa-integrated-fiber-laser-engraver-marking-machine-with-electric-lifting?sca_ref=4451934.of5mkLvEvQ
USE CODE “Project5” for 5% OFF everything on the OMTech Website https://omtechlaser.com?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
OMTech Polar+ 55W Laser: omtechlaser.com/products/polar-55w-desktop-laser-cutter-engraver-with-rotary?srsltid=AfmBOoomCyCz8PWFOsr0BlbhzMaoSeQu7d_4o-9jpcP0uPqwRfdgdcFc 🌟
USE CODE “PROJECT5OFF” for 5% off Longer Machines
longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
Please note we may earn from qualifying purchases when you use the link or codes provided!
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Longer Nano Pro 12W Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKlphZxU_-SMZz160bOmxMH
OMTech Polar+ 55W Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKxcfN3vqZhvyBlNWh7r2C0
Fiber Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKS44hN5P7ycS-WCHDuB-LE
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Canal 3 - Quincas Moreira
USE CODE “PROJECT5OFF” for 5% off Longer Machines
longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
eu.longer.net/?ref=longerlaserAnonymous
80% OFF DISCOUNT Code on Monport’s Marking Spray (While Supplies Last): Anonymous80%OFF
monportlaser.com/products/black-laser-marking-spray-usa?_pos=1&_psq=black+marking+spray&_ss=e&_v=1.0&sca_ref=4451934.of5mkLvEvQ
⏱TIMESTAMPS⏱
0:00 Intro
0:08 Materials/Products We’re Using
0:53 Preparing Material
1:46 Setting Up Flask Design
3:04 Engraving Flask
4:15 Flask Results
4:35 Setting Up Rotary w/ Tumbler
5:36 Setting Up Design for Tumbler
7:18 Engraving Tumbler
7:39 Final Results + Discounts on Products
8:26 Outro
🎬 PRODUCT LINKS🎬
Longer Products (USE CODE “PROJECT5OFF” for 5% off Longer Machines ): longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
Longer Nano Pro 12W: longer3d.com/products/longer-nano-6w-12w-laser-engraving-machine?ref=longerlaserAnonymous&variant=46001451237620
Longer 70 DIY Engraving Materials Pack (Amazon Link): amzn.to/3Sj4OkK
Longer 70 DIY Engraving Materials Pack (Longer Website Link): longer3d.com/products/nano-engraving-essentials-pack?_pos=3&_sid=dc1aecce0&_ss=r&ref=longerlaserAnonymous
eu.longer.net/?ref=longerlaserAnonymous
Black Laser Marking Spray (Use Code “Anonymous80%off” for 80% off): monportlaser.com/products/black-laser-marking-spray-usa?_pos=1&_psq=black+marking+spray&_ss=e&_v=1.0&sca_ref=4451934.of5mkLvEvQ
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Longer Nano Pro 12W Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKlphZxU_-SMZz160bOmxMH
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Boomin' - Dan
Chica Linda - Quincas Moreira
Scale The Mountain - Density & Time
Easy Stroll - TrackTribe
Battle Of The Beast - The Soundings
Fine Dining - TrackTribe
longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
80% OFF DISCOUNT Code on Monport’s Marking Spray (While Supplies Last): Anonymous80%OFF
monportlaser.com/products/black-laser-marking-spray-usa?_pos=1&_psq=black+marking+spray&_ss=e&_v=1.0&sca_ref=4451934.of5mkLvEvQ
In today’s short, we’ll preview our upcoming video where we customize a stainless steel flask and tumbler with designs for Father’s Day gifts. In order to engrave these items, we’ll be using the Longer Nano Pro 12W Diode Laser Engraver (Project5off for 5% off Longer Lasers) and it’s easy to use rotary attachment. Additionally, to mark metals with no fiber laser, we’ll utilize the Monport Black Laser Marking Spray (Anonymous80%OFF for limited time 80% discount) . I hope you enjoy the short, stay tuned for the upcoming full length video/guide :)
🎬 PRODUCT LINKS🎬
Longer Products (USE CODE “PROJECT5OFF” for 5% off Longer Machines ): longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
Longer Nano Pro 12W: longer3d.com/products/longer-nano-6w-12w-laser-engraving-machine?ref=longerlaserAnonymous&variant=46001451237620
Longer 70 DIY Engraving Materials Pack (Amazon Link): amzn.to/3Sj4OkK
Longer 70 DIY Engraving Materials Pack (Longer Website Link): longer3d.com/products/nano-engraving-essentials-pack?_pos=3&_sid=dc1aecce0&_ss=r&ref=longerlaserAnonymous
Black Laser Marking Spray (Use Code “Anonymous80%off” for 80% off): monportlaser.com/products/black-laser-marking-spray-usa?_pos=1&_psq=black+marking+spray&_ss=e&_v=1.0&sca_ref=4451934.of5mkLvEvQ
eu.longer.net/?ref=longerlaserAnonymous
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Longer Nano Pro 12W Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKlphZxU_-SMZz160bOmxMH
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Take Me Out To The Ballgame - Freedom Trail Studio
🎬 PRODUCT LINKS🎬
USE CODE “Anonymous10” for 10% OFF Monport MACHINES
Monport GI30 (similar fiber laser): monportlaser.com/collections/mopa-fiber-laser/products/gi30-mopa-integrated-fiber-laser-engraver-marking-machine-with-electric-lifting?sca_ref=4451934.of5mkLvEvQ
USE CODE “Project5” for 5% OFF everything on the OMTech Website https://omtechlaser.com?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
OMTech Polar+ 55W Laser: omtechlaser.com/products/polar-55w-desktop-laser-cutter-engraver-with-rotary?srsltid=AfmBOoomCyCz8PWFOsr0BlbhzMaoSeQu7d_4o-9jpcP0uPqwRfdgdcFc 🌟
USE CODE “PROJECT5OFF” for 5% off Longer Machines
USA - longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
EU - eu.longer.net/?ref=longerlaserAnonymous
Please note we may earn from qualifying purchases when you use the link or codes provided!
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Longer Nano Pro 12W Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKlphZxU_-SMZz160bOmxMH
OMTech Polar+ 55W Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKxcfN3vqZhvyBlNWh7r2C0
Fiber Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKS44hN5P7ycS-WCHDuB-LE
⏱TIMESTAMPS⏱
0:00 Intro
0:27 Material
0:53 Diode Laser Material Test
5:18 CO2 Laser Material Test
8:42 Fiber Laser Material Test (Marking)
11:19 Fiber Laser Material Test (Deep Engraving)
13:17 Results of Slate Material Tests
14:16 Engraving Same Design on Each Laser
16:11 Deep Engraving Design
16:52 Comparing Laser’s Slate Engravings
20:08 Outro
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Canal 3 - Quincas Moreira
Sunshine Samba - Chris Haugen
Move Up to the Mountains - Aaron Lieberman
Swing Haven 1 - Los Angeles - Reed Mathis
My Peeps - Aaron Lieberman
Cruiser - Magic In The Other
Do The Bop - Everet Almond
Sam the Man - The Mini Vandals
Ratatouille's Kitchen - Carmen María and Edu Espinal
Claim of Thrones - RKVC
Jesse's Carnival Waltz - The Great North Sound Society
By the Fireplace - TrackTribe
**Use code PROJECTANONYMOUS at checkout for 10% your purchase of Creatorally products**: creatorally.com/?ref=PROJECTANONYMOUS
⚡️LIMITED TIME 20% off LASER DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G
➪ OUR USUAL DISCOUNT LINK for the laser we used in this video: bit.ly/3Afsxg0
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
🎬 PRODUCT LINKS🎬
Creatorally Products: creatorally.com/?ref=PROJECTANONYMOUS
Creatorally 3mm Colored Plywood on Amazon: amzn.to/42cSfNJ
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Full Video: youtube.com/watch?v=fdoUAjf0Ufs
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Monport Onyx-R Videos: youtube.com/watch?v=b4gQftQzFWg&list=PLtQ8IvTMaEGJ9316mvCeMUF5EEBhuPiao
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
In it to Win it - Dan _Lebo_ Lebowitz, Tone Seeker
(monportlaser.com/products/black-laser-marking-spray-usa?_pos=1&_psq=black+marking+spray&_ss=e&_v=1.0&sca_ref=4451934.of5mkLvEvQ)
In today’s video, we’ll be using Monport’s Black Laser Marking spray to achieve high-contrast and permanent bold laser marks on a variety of metals, glassware, and ceramics using diode and CO2 laser engravers. During this video we’ll be using this versatile CO2 laser accessory to spray and laser mark stainless steel, brass, copper, ceramic tile, and glass with custom designs. This product is perfect if you’re looking to personalize jewelry, customize glassware, or mark your metal tools without investing in a fiber laser engraver. In addition to showcasing the results of our experience from using this black laser marking spray, we’re also going to demonstrate and complete the simple and easy steps needed to create personalized high contrast engravings on a wide-range of materials. Also, the CO2 laser we’ll be using throughout this video is the Monport Mega 70W Intelligent CO2 Desktop Laser Cutting and Engraving Machine. I hope you enjoy the video! #monportlaser #metalmarking #laserengraving
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).**
🎬 PRODUCT LINKS🎬
MEGA 70W Laser: bit.ly/43wJr69
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
Black Laser Marking Spray (Use Code “Anonymous80%off” for 80% off): monportlaser.com/products/black-laser-marking-spray-usa?_pos=1&_psq=black+marking+spray&_ss=e&_v=1.0&sca_ref=4451934.of5mkLvEvQ
⚡️LIMITED TIME 20% OFF DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Monport MEGA 70W Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGLY2SDgyFrCMXhSkH6HcHlD
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
⏱TIMESTAMPS⏱
0:00 Intro
0:35 Preparing Material
1:30 Marking Stainless Steel (w/CO2)
3:08 Marking Ceramic Tile (w/ CO2)
4:00 Wiping Off spray’s Residue
4:40 Brass & Copper Results (w/ CO2)
4:57 Marking Glassware (w/ Diode)
5:08 Marking Ceramic Tile (w/ Diode)
5:28 Final Results & Outro
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Thou Swell - Freedom Trail Studio
Mediterranean View - Everet Almond
Speedy Gonzalo - Inaban
Scale The Mountain - Density & Time
Pong the Atmosphere - Dan _Lebo_ Lebowitz, Tone Seeker
(monportlaser.com/products/black-laser-marking-spray-usa?_pos=1&_psq=black+marking+spray&_ss=e&_v=1.0&sca_ref=4451934.of5mkLvEvQ)
In today’s short, we’ll be preview our upcoming video using Monport’s Black Laser Marking spray. This product is used to achieve high-contrast and permanent bold marks on a variety of metals, glass, and ceramics using diode and CO2 laser engravers. During this video we’ll be using this versatile CO2 laser accessory to spray and laser mark stainless steel, brass, copper, ceramic tile, and glass with custom designs. This product is perfect if you’re looking to personalize jewelry, customize glassware, or mark your metal tools without investing in a fiber laser. The CO2 laser we’ll be using throughout this video is the Monport Mega 70W Intelligent CO2 Desktop Laser Cutting and Engraving Machine. I hope you enjoy the short!
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).**
🎬 PRODUCT LINKS🎬
MEGA 70W Laser: bit.ly/43wJr69
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
Black Laser Marking Spray (Use Code “Anonymous80%off” for 80% off): monportlaser.com/products/black-laser-marking-spray-usa?_pos=1&_psq=black+marking+spray&_ss=e&_v=1.0&sca_ref=4451934.of5mkLvEvQ
⚡️LIMITED TIME DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G
🎬VIDEO LINKS🎬
Monport MEGA 70W Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGLY2SDgyFrCMXhSkH6HcHlD
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
#metalmarking
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Wonder - Anno Domini Beats
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).**
🎬 PRODUCT LINKS🎬
MEGA 70W Laser: bit.ly/43wJr69
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
⚡️LIMITED TIME DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Monport MEGA 70W Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGLY2SDgyFrCMXhSkH6HcHlD
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
⏱TIMESTAMPS⏱
0:00 Intro
0:44 Connecting Laser to LightBurn
3:20 Connecting Camera to Computer
6:42 Calibrating Camera
9:41 Camera Alignment
11:42 Testing & Adjusting Camera
14:32 Focusing Laser w/ Ramp Test
16:52 Creating Custom Macros
21:33 Wood Engraving Material Test
26:34 Cutting Wood Material Test
28:52 Test Project
30:36 Outro
#monportlaser #monportmega #laserengraving
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Can't Be Beat - The Soundings
A Night Alone - TrackTribe
Charm - Anno Domini Beats
Walk Through the Park - TrackTribe
Fresh - Anno Domini Beats
I Have a Reservation - TrackTribe
Motions - Anno Domini Beats
A Stroll Alone - Everet Almond
Wallflowers - Bad Snacks
Jazz Apricot - Joey Pecoraro
Frank's Last Chase - DJ Williams
Putting On The Ritz - Freedom Trail Studio
The Center Isn't Holding - National Sweetheart
⚡️LIMITED TIME DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G
**Use our CODE “Anonymous10” for 10% OFF ALL MACHINES on Monport’s website**
🎬 PRODUCT LINKS🎬
Monport 20W Portable Fiber Laser: bit.ly/42utXi9
Please note we may earn from qualifying purchases when you use the link or codes provided!
Aliencell Enclosure: amzn.to/4b7JTbn
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Full Length Video: youtube.com/watch?v=6qtoy40Au5g
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Til I Hear'em Say (Instrumental) - NEFFEX
In today’s video, we’ll use the MONPORT ONYX 55W Desktop CO2 Laser Engraver with Autofocus to laser cut and engrave Creatorally LUMINOUS Glow-in-the-Dark Acrylic Sheets and thin colored plywood. We’re going to be making a completely custom and unique design in LightBurn to create a personalized glow in the dark laser engraved night light. Also, we’ll be enhancing the glow-in-the-dark acrylic effect by integrating a blacklight/UV light into our custom lamp light. In order to make our curved frame for our fun OUT OF THIS WORLD laser engraving space themed project 🚀, we’ll be designing and laser cutting a custom wood bending and curving technique. I hope you enjoy the video!
⚡️LIMITED TIME 20% off LASER DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G
➪ OUR USUAL DISCOUNT LINK for the laser we used in this video: bit.ly/3Afsxg0
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
🎬 PRODUCT LINKS🎬
creatorally.com/?ref=PROJECTANONYMOUS
Creatorally 3mm Colored Plywood on Amazon: amzn.to/42cSfNJ
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Monport Onyx-R Videos: youtube.com/watch?v=b4gQftQzFWg&list=PLtQ8IvTMaEGJ9316mvCeMUF5EEBhuPiao
#monportlaser #laserengraving #lasercutting
⏱TIMESTAMPS⏱
0:00 Intro
0:16 Materials
1:00 Creating Design
12:35 Cutting & Engraving Glow-in-the-Dark Acrylic
13:52 Laser Cutting Colored Plywood
15:51 Cutting Transparent Acrylic
16:57 Assembling
20:11 Results
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
The New Order - Aaron Kenny
King Porter Stomp - Joel Cummins
Chosen - Anno Domini Beats
Turtleneck - TrackTribe
Running Errands - TrackTribe
Summer In NY - Dyalla
Sugar - Anno Domini Beats
Valiant - Density & Time
A Single Step - Density & Time
Toy Store Funk - Karneef
Mars 15 at 30k - Dan
Future Glider - Brian Bolger
🎬 PRODUCT LINKS🎬
MEGA 70W Laser: bit.ly/43wJr69
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
⚡️LIMITED TIME DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G
💻SOFTWARE💻
M-Design Hub
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
Let’s unbox, set up, assemble, test, and review the Monport Mega Desktop 70W CO2 Laser Engraving and Cutter Machine. There’s many different advanced features and capabilities that come integrated with this machine that we’ll talk about and show you! In the full length video, we’ll also show you how to download the M-Design Hub free open source software as well as how to use it and its features for this new laser. At the end of this video we’ll do a test project with this Monport Mega from designing in MDH to finishing the laser cut out while providing tips for laser engraving success. Stay tuned for more videos to come when we work with more of its advertised features and engrave more materials!
🎶MUSIC🎶
Win The Battle Win The War - Everet Almond
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).**
🎬 PRODUCT LINKS🎬
MEGA 70W Laser: bit.ly/43wJr69
(Project Anonymous Recommends) Other Monport Laser Engraver’s Page: bit.ly/4i3mz1G
⚡️LIMITED TIME DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G
Please note we may earn a small commission when you use our links or codes, we appreciate your support of our channel.
💻SOFTWARE💻
M-Design Hub
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
⏱TIMESTAMPS⏱
0:00 Intro
0:14 Unboxing
1:29 Preparing Machine
2:49 Details of Under the Back Panel
5:09 Connecting Air Duct Hose & Power Supply
5:44 Details of Laser Module & Workspace
9:00 Details of Sides of the Machine
10:10 Package Contents
11:25 Installing M-Design Hub
12:36 Connecting Laser w/ Computer
15:25 The Touchscreen
16:17 Calibrating Camera
18:38 LiDAR Ranging System
22:09 Optical Target Assembly
22:33 M-Design Hub v1.3
23:56 Software Features
32:21 Design to Engraving Test Project
39:51 Our Final Thoughts
47:34 Outro
#monportlaser #lasercutting #laserengraving #monportmega
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Mississippi Mover - Everet Almond
A Brand New Start - TrackTribe
The Garden and the Snowflake - Dan
Sonatina No 2 in F Major Allegro - Joel Cummins
The Good Old Days - Dyalla
Thou Swell - Freedom Trail Studio
We Share This - Freedom Trail Studio
Mas Cafe - Casa Rosa
Lawrence - TrackTribe
Walk Through the Park - TrackTribe
Time Slips By - Go By Ocean _ Ryan McCaffrey
Minor Blues for Booker - E's Jammy Jams
The Gentlemen - DivKid
By the Fireplace - TrackTribe
Backwoods BBQ - Chris Haugen
Jazz In Paris - Media Right Productions
Josef Suk, Serenade, Op 6 - A Far Cry
Jesse's Carnival Waltz - The Great North Sound Society
In today’s video, we’ll be laser cutting 3mm pre-painted multiple colored plywood sheets from Creatorally to create a Hippopotamus inspired colorful glasses holder. We’ll be seeing if this innovative product/material can improve our workflow of laser cutting pieces for our custom designed projects. In order to see if this vibrant colored wood is a laser engraver must have, we’ll be laser cutting the colorful material using the Monport Onyx-R 55W Desktop CO2 Laser Engraver. Also, we’re going to use LightBurn to create our completely personalized animal themed glasses stand design file. We hope you enjoy our step-by-step guide for laser engraving an eyeglass stand, perfect for beginners. You will learn how to design your own eyeglass stand, prepare the materials, and have a unique fun laser engraving project. #laserengraving #lasercutting #monportlaser
🎬 PRODUCT LINKS🎬
creatorally.com/?ref=PROJECTANONYMOUS
Creatorally 3mm Colored Plywood on Amazon: amzn.to/42cSfNJ
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
⚡️LIMITED TIME LASER DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4lkpaHq
➪ OUR USUAL DISCOUNT LINK for the laser we used in this video: bit.ly/3Afsxg0
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website
(Please note we may earn from qualifying purchases when you use the link or codes provided!)
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Monport Onyx-R Videos: youtube.com/watch?v=b4gQftQzFWg&list=PLtQ8IvTMaEGJ9316mvCeMUF5EEBhuPiao
⏱TIMESTAMPS⏱
0:00 Intro
0:14 Material
0:50 Creating Design
3:21 Wood Colors for this Project
4:14 Laser Cutting Base
5:54 Cutting Colored Wood
9:52 Assembling
11:45 Our Thoughts/Results
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Last Cappuccino in Rio - Chris Haugen
Jungle Trip - Quincas Moreira
Lonely Man - Alex Hamlin
Valiant - Density & Time
Mediterranean View - Everet Almond
Gaiety in the Golden Age - Aaron Kenny
Battle Of The Beast - The Soundings
Baroque Coffee House - Doug Maxwell/Media Right Productions
🌟USE CODE: PROJECT5OFF for 5% off Longer Machines 🌟
Discount Link: longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
⚡️SUPER CLEAN PRODUCT LINKS⚡️
Super Clean Aerosol Degreaser: amzn.to/44uXjdS
Super Clean All Purpose Spray Cleaner: amzn.to/3Pgooxe
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
🎬VIDEO LINKS🎬
Longer Laser Set Up & Review: youtube.com/watch?v=-Gy5MhH2RZ8
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
⏱TIMESTAMPS⏱
0:00 Intro
0:11 Materials
1:46 Saucer Design Set Up
3:19 Saucer Set Up w/ Laser
5:54 Rotary Set Up
6:52 Clay Pot Rim Design
11:18 Engraving Clay Pot’s Rim
13:11 Setting Up Laser w/ Middle of Pot
15:18 Engraving Middle of Pot
15:52 Super Clean Products
16:30 Final Results
💻SOFTWARE💻
LightBurn
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2024 - All Rights Reserved
🎶MUSIC🎶
Fine Dining - TrackTribe
Jazz In Paris - Media Right Productions
The Road To Mordor - Ezra Lipp
On The Rocks - TrackTribe
Country Rough - Everet Almond
Minor Blues for Booker - E's Jammy Jams
Keep Climbing - The Soundings
Far Behind - Silent Partner
Hopping Trains - Nathan Moore
**⚡️LIMITED TIME DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G **
➪ OUR USUAL DISCOUNT LINK for the laser we used in this video: bit.ly/42utXi9
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).**
🎬 PRODUCT LINKS🎬
Monport 20W Portable Fiber Laser: bit.ly/42utXi9
Please note we may earn from qualifying purchases when you use the link or codes provided!
Aliencell Enclosure: amzn.to/4b7JTbn
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
#monportlaser #fiberlaserengraver #metalmarkingmachine #fiberlaser #annealing #colorengraving
⏱TIMESTAMPS⏱
0:00 Intro
0:56 Unboxing
1:40 Package Contents
3:22 Setting Up Laser
5:11 Software Set Up
12:02 Engraving Painted Aluminum
17:41 Cutting Painted Aluminum
19:59 Engraving Copper
22:19 Engraving Stainless Steel
29:18 Engraving Black Acrylic
31:05 Our Thoughts
34:43 Cutting + Engraving Painted Aluminum Project
36:01 Outro
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Jane Street - TrackTribe
The Joint is Jumpin - Joel Cummins
Summer In NY - Dyalla
Contender - TrackTribe
The Thought of You - TrackTribe
Sonatina No 2 in F Major Allegro - Joel Cummins
Jesse's Carnival Waltz - The Great North Sound Society
I'll Take None Of That - Karneef
Gaiety in the Golden Age - Aaron Kenny
Homer Said - Dyalla
No.9_Esther’s Waltz - Esther Abrami
Toy Shopping - Jeremy Korpas
Don’t Wanna Be - Kwon
Stick The Landing - Everet Almond
By the Fireplace - TrackTribe
Frodo's Quest - Ezra Lipp
No.1 A Minor Waltz - Esther Abrami
⚡️LIMITED TIME DISCOUNT CODE: Anonymous20⚡️
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: bit.ly/4i3mz1G
➪ OUR USUAL DISCOUNT LINK for the laser we used in this video: bit.ly/3Afsxg0
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).**
🎬 PRODUCT LINKS🎬
55W CO2 Laser: http://bit.ly/3Afsxg0
Please note we may earn from qualifying purchases when you use the link or codes provided!
Translucent acrylic: amzn.to/4gnxt1n
Walnut Plywood: amzn.to/3CgWi1l
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Monport Onyx-R Videos: youtube.com/watch?v=b4gQftQzFWg&list=PLtQ8IvTMaEGJ9316mvCeMUF5EEBhuPiao
⏱TIMESTAMPS⏱
0:00 Intro
0:30 Creating Box Design
5:42 Laser Cutting & Engraving Box
7:30 Painting Box
8:04 Assembling Box
10:36 Designing Keychain
11:19 Engraving & Cutting Keychain
13:02 Final Results
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Modern Attempt - TrackTribe
Never Slow Me Down - Everet Almond
Up And At Em - Nathan Moore
Gaiety in the Golden Age - Aaron Kenny
Good Days - Yung Logos
Calle Calor - Quincas Moreira
Bach Cello Suite No. 1, G Major, Prelude - Cooper Cannell
Running It Down - Everet Almond
No.1 A Minor Waltz - Esther Abrami
🎬 PRODUCT LINKS🎬
⚡️LASER LINK: acmerlaser.com/products/portable-laser-engraver-mini-machine?ref=projectanonymous&srsltid=AfmBOop59ThpT2Hs-n-xzs4odCWEGtCKDE7lMw6t4m2rN7JpYC0F6elI&variant=45831732789474
ACMER Website: acmerlaser.com/?ref=projectanonymous
🌟Amazon Link to laser: amzn.to/4hDBRu0
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
⏱TIMESTAMPS⏱
0:00 Intro
0:18 Unboxing
3:26 Setting Up Laser
5:18 Setting Up LightBurn
6:50 Material Test on Wood
12:22 Fixing Belt Tension
13:20 2nd Material Test on Wood
15:43 Engraving Painted Metal
17:34 Engraving Denim
20:04 Engraving Canvas
22:36 Cutting Card Stock
24:10 Our Thoughts
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
#acmer #laserengraving #minilaser
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Chica Linda - Quincas Moreira
Mas Cafe - Casa Rosa
Blue Dream - Cheel
The Painted Night - National Sweetheart
Crab Cay - Cumbia Deli
Losing Your Marbles - The Soundlings
Homer Said - Dyalla
Curse Of Old - Density & Time
Keep Climbing - The Soundings
Ratatouille's Kitchen - Carmen María and Edu Espinal
The Center Isn't Holding - National Sweetheart
Fine Dining - TrackTribe
English Country Garden - Aaron Kenny
**⚡️LIMITED TIME DISCOUNT CODE: Anonymous20⚡️**
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: ➡️ monportlaser.com/collections/desktop-lasers-and-fiber-lasers-recommended-by-projectanonymous_duo?sca_ref=4451934.of5mkLvEvQ
➪ OUR USUAL DISCOUNT LINK for the laser we used in this video: bit.ly/3Afsxg0
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).**
🎬 PRODUCT LINKS🎬
55W CO2 Laser: http://bit.ly/3Afsxg0
Please note we may earn from qualifying purchases when you use the link or codes provided!
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Monport Onyx-R Videos: youtube.com/watch?v=b4gQftQzFWg&list=PLtQ8IvTMaEGJ9316mvCeMUF5EEBhuPiao
#monportlaser #laserengraving #monport #co2laserengraver
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
A Baroque Letter - Aaron Kenny
The Beast Within - The Soundings
Greener Grass - Dyalla
Impertinence - Joel Cummins
⚡️USE CODE: Project5 for 5% off everything on the OMTech website!⚡️
omtech.com/?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
🌟Project5 for 5% of this OMTech Polar+ 55W Laser: omtechlaser.com/products/polar-55w-desktop-laser-cutter-engraver-with-rotary?srsltid=AfmBOoomCyCz8PWFOsr0BlbhzMaoSeQu7d_4o-9jpcP0uPqwRfdgdcFc 🌟
⏱TIMESTAMPS⏱
0:00 Intro
0:24 Materials
0:47 Using Boxes.py
1:28 Creating Design in LightBurn
5:49 Laser Cutting Interior Box
8:42 Laser Cutting Exterior Box
12:39 Assembling
14:27 Results
🎬 PRODUCT LINKS🎬
OMTech Polar+ 55W Laser: omtechlaser.com/products/polar-55w-desktop-laser-cutter-engraver-with-rotary?srsltid=AfmBOoomCyCz8PWFOsr0BlbhzMaoSeQu7d_4o-9jpcP0uPqwRfdgdcFc
OMTech Website: https://omtechlaser.com?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
Please note we may earn from qualifying purchases when you use the link or codes (Project5) provided!
Walnut Plywood: amzn.to/3CgWi1l
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Our OMTech Videos: youtube.com/playlist?list=PLtQ8IvTMaEGKxcfN3vqZhvyBlNWh7r2C0
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2024 - All Rights Reserved
🎶MUSIC🎶
No.1 A Minor Waltz - Esther Abrami
Hot Water - National Sweetheart
Start Vacuum - Karneef
Can't Be Beat - The Soundings
Give My Regards To Broadway - Freedom Trail Studio
Summer In NY - Dyalla
Josef Suk, Serenade, Op 6 - A Far Cry
Country Rough - Everet Almond
Saving the World - Aaron Kenny
⭐️ OUR DISCOUNT LINK for the laser we used in this video: monportlaser.com/collections/desktop-lasers-and-fiber-lasers-recommended-by-projectanonymous_duo?sca_ref=4451934.of5mkLvEvQ
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).**
⏱TIMESTAMPS⏱
0:00 Intro
0:20 Materials/Our Plan
1:11 Creating Designs in LightBurn
3:57 Setting Up Collar for Engraving
6:13 Engraving
6:25 Updating Settings
6:51 Engraving
7:44 Engraving 2nd Collar
9:11 Results
🎬 PRODUCT LINKS🎬
CODE “Anonymous10” for 10% OFF MACHINES
Monport GI30 (similar fiber laser): monportlaser.com/collections/mopa-fiber-laser/products/gi30-mopa-integrated-fiber-laser-engraver-marking-machine-with-electric-lifting?sca_ref=4451934.of5mkLvEvQ
Please note we may earn from qualifying purchases when you use the link or codes provided!
💻SOFTWARE💻
Lightburn for Fiber Laser: bit.ly/3SneRXg
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Monport GI20 Fiber Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKS44hN5P7ycS-WCHDuB-LE
#monportlaser #fiberlaserengraver #laserengraving #mopalasermarkingmachine
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Time Slips By - Go By Ocean _ Ryan McCaffrey
Stick The Landing - Everet Almond
Ratatouille's Kitchen - Carmen María and Edu Espinal
On My Own - Bail Bonds
⚡️ CODE: PROJECT5OFF for 5% off Longer Machines ⚡️
Discount Link: longer3d.com/discount/PROJECT5OFF?ref=longerlaserAnonymous
Amazon link to laser: amzn.to/43dIT4U
Please note we may earn from qualifying purchases when using links/codes.
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
⏱TIMESTAMPS⏱
0:00 Intro
0:41 Unboxing Laser
3:29 Assembling Laser
4:14 Software Set Up
7:25 Anodized Aluminum Material Test
12:03 Wood Engrave Test
14:27 Wood Cut Test
16:20 Unboxing Slide Extension
17:47 Setting Up Slide Extension
21:29 Slide Extension Software Set Up
23:31 Slide Extension Test Project
25:26 Unboxing Rotary
27:35 Rotary Set Up
32:00 Engraving w/ Rotary
33:36 90° Handheld Engraving
34:45 Final Thoughts
💻SOFTWARE💻
LightBurn
#longerlaser #laserengraving #longernano
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2024 - All Rights Reserved
🎶MUSIC🎶
Welcome - Anno Domini Beats
Tasty Waves - National Sweetheart
No.9_Esther’s Waltz - Esther Abrami
Ride of the Valkyries (by Wagner)
Chicago - Freedom Trail Studio
Some College - National Sweetheart
Never Slow Me Down - Everet Almond
Sonatina No 2 in F Major Rondo - Joel Cummins
Waltz AF - Everet Almond
Easy Stroll - TrackTribe
A Single Step - Density & Time
Do The Bop - Everet Almond
Mississippi Mover - Everet Almond
By the Fireplace - TrackTribe
The Thought of You - TrackTribe
🎬 PRODUCT LINKS🎬
AtomStack Ace A10 Pro V2 Laser: amzn.to/4aLM3xP
AtomStack Air Assist: amzn.to/4bgoFZ7
AtomStack Website: amzn.to/447lctD
(As an Amazon Associate, we may earn from qualifying purchases when you use the link.)
Z-Axis: atomstack.com/products/atomstack-l2-smart-z-axis-module?_pos=1&_psq=l2+smart&_ss=e&_v=1.0
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
AtomStack Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGIz_TrU7vDTGKfCgVidflPx
⏱TIMESTAMPS⏱
0:00 Intro
0:14 Materials
0:33 Cutting Wood
1:26 Applying Edge Banding
2:21 Assembling
9:22 Attaching Pieces w/ Glue
10:08 Engraving
12:25 Results
💻SOFTWARE💻
LightBurn: monportlaser.com/collections/software-1/products/lightburn-software-gcode-license-key?sca_ref=4451934.of5mkLvEvQ
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2024 - All Rights Reserved
🎶MUSIC🎶
Swipesy Cakewalk - E's Jammy Jams
Backwoods BBQ - Chris Haugen
The Beast Within - The Soundings
Accordion - Andrew Huang
Baroque Coffee House - Doug Maxwell_Media Right Productions
As You Were - TrackTribe
Don't Wanna Be - Kwon
Night Run Away - An Jone
Chariots of War - Aakash Gandhi
Promo code for 20% off is limited and the discount applies on current stock of the Monport ONYX, 40W Pro & 20w Portable Fiber Laser only. Use Anonymous10 to save across the website and continued use after limited promo ends. Be sure to check out our page on Monport’s website for details: ➡️ monportlaser.com/collections/desktop-lasers-and-fiber-lasers-recommended-by-projectanonymous_duo?sca_ref=4451934.of5mkLvEvQ
In today’s video, we’ll be engraving and cutting black acrylic to create a unique look and textured engraving result. In order to make this high contrast personalized engraving, we’ll be using our Monport GI20 Fiber Laser to engrave and Monport 55W Onyx-R to laser cut. While creating this custom keychain, we’ll walk you through how we design in LightBurn, our engraving settings, the process of using two different lasers for one project, and a few tips and tricks. We hope you enjoy the video achieving amazing results with the use of two types of lasers! #fiberlaserengraver #monportlaser #monport #laserengraving
⭐️ OUR DISCOUNT LINK for the laser we used in this video: bit.ly/3Afsxg0 ⭐️
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).**
⏱TIMESTAMPS⏱
0:00 Intro
0:17 Design for Cutting
3:42 Design for Engraving
6:40 Materials We’re Using
7:04 Laser Cutting
7:54 Laser Engraving
10:00 Results
🎬 PRODUCT LINKS🎬
CODE “Anonymous10” for 10% OFF MACHINES (monportlaser.com/projectanonymous)
monportlaser.com/collections/desktop-lasers-and-fiber-lasers-recommended-by-projectanonymous_duo?sca_ref=4451934.of5mkLvEvQ
55W CO2 Laser: http://bit.ly/3Afsxg0
Monport GI30 (similar fiber laser to the one shown in the video): monportlaser.com/collections/mopa-fiber-laser/products/gi30-mopa-integrated-fiber-laser-engraver-marking-machine-with-electric-lifting?sca_ref=4451934.of5mkLvEvQ
Please note we may earn from qualifying purchases when you use the link or codes provided!
💻SOFTWARE💻
Lightburn for Fiber Laser: bit.ly/3SneRXg
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Monport GI20 Fiber Laser Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGKS44hN5P7ycS-WCHDuB-LE
Monport Onyx-R Videos: youtube.com/watch?v=b4gQftQzFWg&list=PLtQ8IvTMaEGJ9316mvCeMUF5EEBhuPiao
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Modern Attempt - TrackTribe
Fine Dining - TrackTribe
Lazy Walk - Cheel
Beast Mode - The Soundings
Never Slow Me Down - Everet Almond
Strollin' - TrackTribe
In today’s video, we’ll be tuning up our laser engraving settings in LightBurn to fix blurry text and engravings. This will improve your engraving results on any laser (diode, CO2, etc.), we'll be using the Monport Onyx-R 55W CO2 Desktop Laser Engraver for this tutorial. I hope this video on testing offset settings and adjustments in Lightburn helps you improve your laser engraving results!
**DISCOUNT LINK for the laser we used in this video: bit.ly/3Afsxg0 on Monport’s website (machines and products we use are linked below). **
⏱TIMESTAMPS⏱
0:00 Intro
0:29 Setting Up Test
3:13 Engraving
4:20 Results of the Test
6:05 Measuring
7:27 Adjusting Offset
9:36 Adjusting Offset (again)
11:22 Improved Engraving Results
13:08 Outro
🎬 PRODUCT LINKS🎬
Digital Microscope: amzn.to/3TgcwvV
55W CO2 Laser: http://bit.ly/3Afsxg0
monportlaser.com/collections/desktop-lasers-and-fiber-lasers-recommended-by-projectanonymous_duo?sca_ref=4451934.of5mkLvEvQ
Please note we may earn from qualifying purchases when you use the link or codes provided!
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Monport Onyx-R Videos: youtube.com/watch?v=b4gQftQzFWg&list=PLtQ8IvTMaEGJ9316mvCeMUF5EEBhuPiao
#monportlaser #laserengraving #co2laserengraver
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Dogtown - National Sweetheart
Lonely Man - Alex Hamlin
The Gentlemen - DivKid
Nothing Left to Decide - Ryan McCaffrey_Go By Ocean
Country Rough - Everet Almond
Dance for Wind Trio - Sir Cubworth
In today’s video, we’ll be creating our first customized faux stained glass sun catcher sign with OMTech Polar+ 55W CO2 Laser Engraver/Cutter. We’ll be using our laser to cut wood, transparent acrylic, and translucent acrylic. In order to create our personalized art design for this stained glass window effect, we’ll use LightBurn. I hope you enjoy the video on how to make a beautiful stained glass art piece with acrylic and a laser engraver! #lasercutting #omtechlasers #omtechpolar #co2laserengraver
omtech.com/?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
🌟Project5 for 5% of this OMTech Polar+ 55W Laser: omtechlaser.com/products/polar-55w-desktop-laser-cutter-engraver-with-rotary?srsltid=AfmBOoomCyCz8PWFOsr0BlbhzMaoSeQu7d_4o-9jpcP0uPqwRfdgdcFc 🌟
⏱TIMESTAMPS⏱
0:00 Intro
0:22 Materials
0:45 Designing
4:44 Engraving Wood
6:33 Engraving Acrylic
9:25 Assembling
10:43 Results
🎬 PRODUCT LINKS🎬
Acrylic: amzn.to/4gnxt1n
OMTech Polar+ 55W Laser: omtechlaser.com/products/polar-55w-desktop-laser-cutter-engraver-with-rotary?srsltid=AfmBOoomCyCz8PWFOsr0BlbhzMaoSeQu7d_4o-9jpcP0uPqwRfdgdcFc
OMTech Website: https://omtechlaser.com?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
Please note we may earn from qualifying purchases when you use the link or codes (Project5) provided!
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2024 - All Rights Reserved
🎶MUSIC🎶
Morning Mood (by Grieg) - Grieg
Jesse's Carnival Waltz - The Great North Sound Society
Contender - TrackTribe
Summer In NY - Dyalla
Jazz In Paris - Media Right Productions
Ratatouille’s Kitchen - Carmen María and Edu Espinal
⚡️USE CODE: Project5 for 5% off everything on the OMTech website!⚡️
omtech.com/?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
⏱TIMESTAMPS⏱
0:00 Intro
0:18 Boxes.py
0:50 Creating Design
4:18 Our Plan
4:42 Engraving Chipboard
7:28 Engraving Acrylic
8:27 Test Fit
9:25 Assembling
10:22 Adding LED Lights
12:54 Results
🎬 PRODUCT LINKS🎬
Rocker Switch : amzn.to/4aeLNYQ
Power Supply: amzn.to/3E38Ycm
Power Jack: amzn.to/4gSALuD
OMTech Polar+ 55W Laser: omtechlaser.com/products/polar-55w-desktop-laser-cutter-engraver-with-rotary?srsltid=AfmBOoomCyCz8PWFOsr0BlbhzMaoSeQu7d_4o-9jpcP0uPqwRfdgdcFc
OMTech Website: https://omtechlaser.com?sca_ref=7599889.cVeaFBziNb&sca_source=YouTube
Please note we may earn from qualifying purchases when you use the link or codes (Project5) provided!
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2024 - All Rights Reserved
🎶MUSIC🎶
Summer In NY - Dyalla
Sonatina No 2 in F Major Rondo - Joel Cummins
Claim of Thrones - RKVC
Jesse's Carnival Waltz - The Great North Sound Society
Everybody Get Up - Everet Almond
Toy Shopping - Jeremy Korpas
Saving the World - Aaron Kenny
**Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines and products we use are linked below).**
In today’s video, we’ll be using the Monport Onyx-R 55W Desktop Laser Engraver to etch/engrave a custom acrylic night light. In order to set up our designs and adjust engraving settings, we’ll use LightBurn. This project is an easy and fun way to create a personalized gift idea. We hope you enjoy our video on how to make an engraved color changing clear acrylic LED nightlight! #monportlaser #laserengraving
⏱TIMESTAMPS⏱
0:00 Intro
0:12 Materials We’re Using
0:57 Creating Design
2:40 Engraving Set Up
4:33 Engraving
10:42 Results
🎬 PRODUCT LINKS🎬
monportlaser.com/collections/desktop-lasers-and-fiber-lasers-recommended-by-projectanonymous_duo?sca_ref=4451934.of5mkLvEvQ
55W CO2 Laser: http://bit.ly/3Afsxg0
Acrylic & Bases Light Set: amzn.to/4jbmevR
Please note we may earn from qualifying purchases when you use the link or codes provided!
💻SOFTWARE💻
Lightburn License for 55w Laser if you don’t already have one: bit.ly/3YBm9tp
Add on DSP Support for existing License: lightburnsoftware.com/products/upgrade-gcode-to-dsp-license
🎬VIDEO LINKS🎬
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
Monport Onyx-R Videos: youtube.com/watch?v=b4gQftQzFWg&list=PLtQ8IvTMaEGJ9316mvCeMUF5EEBhuPiao
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2025 - All Rights Reserved
🎶MUSIC🎶
Josef Suk, Serenade, Op 6 - A Far Cry
Summer In NY - Dyalla
Sonatina No 2 in F Major Rondo - Joel Cummins
Gaiety in the Golden Age - Aaron Kenny
Ratatouille’s Kitchen - Carmen María and Edu Espinal
Claim of Thrones - RKVC
Jazz In Paris - Media Right Productions
Saving the World - Aaron Kenny


