Lean to type extension roof ***IN TIME LAPSE*** The Tall Carpenter 2022-01-14 | this is a short video showing me fitting a lean to roof on the back of a house extension.
Fitting replacement newels on a staircase makeover***HOME MADE JIG ALERT*** The Tall Carpenter 2024-08-12 | In this video I show how a use a simple jig to help me fit new top newels to an old staircase to give a new lease of life.
Cutting a door hinge in 96 seconds with a Pro carpenter***ONLY HAND TOOLS*** The Tall Carpenter 2024-08-05 | In this short video I show how quickly I can accurately cut the the housing for a 3 inch butt hinge using only hand tools and the traditional method.
Fitting kitchen skirting plinths***VERY TIME CONSUMING*** The Tall Carpenter 2024-07-29 | In this video I show how I go about cutting and fitting skirting type plinths on kitchen base units.
SHOCKING UK drivers! ***GETTING TO AND FROM WORK IS RISKY*** The Tall Carpenter 2024-07-28 | Just a short video of 4 clips taken from my vans dashcam.Its a wonder we can get to work and back!!
Kitchen fitting with a professional carpenter***PART 4*** The Tall Carpenter 2024-07-21 | In this video I,m tackling fitting the cornice and lighting pelmet.
How to fit a kitchen with a professional carpenter***PART 3*** The Tall Carpenter 2024-07-15 | In this video I complete work on fitting the end panels.
Kitchen fitting with a general carpenter.(WALL UNITS)***PART 2*** The Tall Carpenter 2024-05-26 | In this video I continue with the kitchen installation and how I deal with a few issues along the way.
Kitchen fitting with a general carpenter.(BASE UNITS)***LETS SEE HOW HE DOES IT*** The Tall Carpenter 2024-04-21 | In this video I show how I start setting out a kitchen installation and how I deal with a few issues along the way.
Built in, sliding door wardrobes part 2***I TELL YOU HOW MUCH THEY COST*** The Tall Carpenter 2024-03-03 | In this video I show how I fit the sliding doors, adjust them and finally how much the whole lot cost.slidingwardrobeworld.com
Built in sliding door wardrobes part 1***FITTING INTERNAL SHELVES AND PARTITIONS*** The Tall Carpenter 2024-02-18 | In this video I show how I start the first stage of finishing 3 sets of sliding door wardrobes.
Fitting feather edge cladding boards***UK CARPENTRY***(how I do it) The Tall Carpenter 2024-02-05 | In this video I show how I set out and finish a gable wall in timber, feather edge boards, and how I get them behind the previously fitted barge boards.
How I set out and fix gable end barge boards***LEAVING ENOUGH ROOM FOR CLADDING*** The Tall Carpenter 2024-01-21 | In this video I show how I go about setting out and fixing solid timber barge boards, also trying to make it easy for the brick layers to finish their block work, and then for me to fit feather boarding at a later date.
Fitting industrial unit first floor using traditional joisting method**WORKING WITH A COLD🤧** PART 2 The Tall Carpenter 2023-12-17 | In this video we finish fitting the hangers and joists and lay down the chipboard flooring.
Fitting industrial unit first floor using traditional joisting method***ITS PRETTY BIG!!!*** Part 1 The Tall Carpenter 2023-12-10 | In this video I show how I fit an 8x2 wall ledger around the perimeter of a new floor as well as build a centre supporting wall.
Issues with thermal bridging around steel beams and how to help prevent condensation**UK Carpentry** The Tall Carpenter 2023-11-14 | ...
Replacing a damaged laminate floor board. ***CAN I DO IT WITHOUT TAKING THE WHOLE FLOOR UP?*** The Tall Carpenter 2023-09-25 | ...
How to set out and cut a bastard hip***NO MATHS REQUIRED***Roof framing UK The Tall Carpenter 2023-08-28 | In this video I show how I go about setting out, cutting and fitting a bastard hip on a small, lean to roof.The video contains tips which, I hope, may help others when attempting, what can be a confusing part of roofing carpentry.
How to fit a kite winder staircase***FINAL PART*** The Tall Carpenter 2023-08-14 | In this video I finish fitting the last, lower flight, newel and bullnose tread before fitting the remaining treads and riser, and then finally fixing it in place.
Excuses or a confession? ***WHY WERE THE FLOOR JOISTS OUT OF LEVEL?*** The Tall Carpenter 2023-08-09 | In this video I try and explain a little as to the reason for the floor joists being out of level at one end of a newly installed floor.This is a prime example of not taking enough time to digest what's going on with a job before rushing to get it completed.
How to install a kite winder staircase PART 2***AN EASILY AVOIDABLE MISTAKE*** The Tall Carpenter 2023-08-06 | In the next part of this video I show how I plan and install the middle flight of the stair case, and unfortunately, uncover a silly mistake.
How to install a kite winder staircase PART 1***IM ON MY OWN AGAIN*** The Tall Carpenter 2023-08-02 | In this video I show how I set up and fit the first section of a winder stair set.
Fitting noggins in timber stud wall***WHY I LIKE USING GAS NAILERS*** The Tall Carpenter 2023-07-03 | ...
Making old kitchen walls straight and plumb***WONKEY KITCHEN WALLS PART3*** The Tall Carpenter 2023-06-19 | In this video I start to get the lining out of the kitchen walls wrapped up and form an alcove for the new range style cooker.
Ive always HATED this job!!!!? ***NOW I LOVE IT!***HOW TO FIT DIMINISHING ROOF TRUSSES MADE EASY*** The Tall Carpenter 2023-06-05 | In this video I show a great method of lining in and fitting diminishing roof trusses that are typically used to connect one truss roof to another.
Making an old wall super straight and plumb using timber battens and packers***PLUS MANAGING DAMP*** The Tall Carpenter 2023-05-28 | In this video I do more work in this wonky old kitchen, lining the walls ready for plaster boarding.
This is a proper BODGE UP!!***WHERE DO I EVEN START?*** (part 1) The Tall Carpenter 2023-05-15 | Not all of my jobs are on lovely new properties.
How to work out rafter lengths for different height wall plates***UK ROOFING CARPENTRY/FRAMING*** The Tall Carpenter 2023-05-13 | In this short video I show the simple method I use to determine the rafter length when pitching onto different height wall plates.
Fitting steel beam to support new and existing house floors***KNOCKING THE BACK OF THE HOUSE OUT*** The Tall Carpenter 2023-04-30 | In this video I show how we install a steel beam to enable the support of a new extension floor, plus carrying the existing house floor.
Carpentry 2nd fix 2 bed house/bungalow *** FINAL VIDEO WALK THROUGH*** The Tall Carpenter 2023-04-16 | This is the final video in a series of videos showing me complete the 2nd fix carpentry on a small, single story property.
Laminate floor setting out and fitting tips with a Pro Carpenter***COMPLETE HOUSE 2ND FIX PART6*** The Tall Carpenter 2023-04-09 | In this video I show how I prepare and fit a laminate floor through a large living area and a hallway.
Kitchen fitting with a Pro carpenter PART2***COMPLETE HOUSE 2ND FIX*** PART 5 The Tall Carpenter 2023-04-02 | In the 2nd part of this kitchen fitting video, I'm starting to get things wrapped up, but I'm not having as much fun as usual!!.
Kitchen fitting with a Pro carpenter PART 1***COMPLETE HOUSE 2ND FIX*** PART 4 The Tall Carpenter 2023-03-26 | In this video I start to lay out and fit the kitchen with a few hurdles to get over along the way.
How to fit wardrobe shelves and sliding doors with a pro carpenter***COMPLETE HOUSE 2ND FIX PART3*** The Tall Carpenter 2023-03-19 | In this video I show how I go about marking, cutting and fitting out wardrobe shelves before fitting sliding, pre-finished and mirrored doors.
How to fit skirting and architrave with a professional carpenter ***COMPLETE HOUSE 2ND FIX PART 2*** The Tall Carpenter 2023-03-05 | In this video I show you how I go about 2nd fixing a bungalow from start to finish.In PART 2 I show how I measure, cut and fix my architraves and also my skirtings.
How to hang a door with a professional carpenter***COMPLETE HOUSE 2ND FIX CARPENTRY PART 1*** The Tall Carpenter 2023-02-19 | In this video I show you how I go about 2nd fixing a bungalow from start to finish.Part 1 is all about hanging doors and the process I go through plus many of the tips and tricks I use.Fitting a door latch.studio.youtube.com/video/ExzXomOEBzI/editFitting bolt through handles.studio.youtube.com/video/DnQXZpOh8G4/edit
How to talk into a camera ***NOT*** (stick to carpentry mate!!) The Tall Carpenter 2023-02-17 | Making videos for YouTube is great fun, but sometimes the words you need are not coming out!!!
Building a flat roof using a warm roof method PART2 ***FITTING DECK AND ROOF LIGHT CURBS*** The Tall Carpenter 2023-02-05 | In part 2 I fit the lower deck layer and then build the curbs/upstands that the roof lights will sit on, before fitting the vapour membrane, insulation, top deck and fascia.
Building a flat roof using the warm roof method PART 1***PLUS TRIMMING OUT FOR ROOF LIGHTS*** The Tall Carpenter 2023-01-23 | In this video I show you how I go about setting out and cutting the joists and firrings for a 'warm' flat roof.
Finished Oak stair case***UK Carpentry 2nd fixing***Final part The Tall Carpenter 2022-12-29 | In this video I show the completed staircase with only the carpet to be fitted.
Kitchen Fitting in the 12 Hip House***IT ALL GOT A BIT HECTIC*** The Tall Carpenter 2022-12-19 | In this video I show how I finish off this kitchen as well as the worktops being installed.
Kitchen fitting UK***ACCURATELY POSITION AND FIX FRIDGE/FREEZER HOUSING TOP SHELF*** The Tall Carpenter 2022-12-14 | In this video I share a small and quick tip on how I accurately and easily position and fix the shelf above the fridge/freezer in a tall carcass.
Kitchen fitting in the 12 hip house PT.2***UK CARPENTRY 2ND FIXING*** The Tall Carpenter 2022-12-05 | ...
Fitting kitchen base units***UK Carpentry 2nd fixing*** The Tall Carpenter 2022-11-28 | In this video I start to fit the kitchen base units ready for the worktops to be templated.
UK Carpentry 2nd fixing ***fitting oak staircase half newels and handrails***Part 2 The Tall Carpenter 2022-11-21 | In this video I continue to 2nd fix the stairs by fitting the half newels and the hand rails.
UK Carpentry 2nd Fixing ***fitting oak staircase floor cappings***Part 1 The Tall Carpenter 2022-11-14 | In this video I show how I cut back the plastered reveals to accommodate the oak floor capping detail.
Why I hate being a carpenter😮😬 ***BUT ALSO WHY I LOVE IT😍*** The Tall Carpenter 2022-11-07 | Carpenters, unlike most other trades, need huge amounts of kit and tools to be able to earn a decent wage out on site, and sometimes it can seem a right pain!!.
The Tall Carpenter Monthly October 2022 The Tall Carpenter 2022-11-04 | This a new video format where I talk about what's been happening on the channel over the last month.
How to remove kitchen plinths/kick boards ***THE TOOL TO MAKE IT SUPER EASY*** The Tall Carpenter 2022-11-01 | ...
