Sekonic
Chris Knight - Learning Exposure and Light Meter Basics
updated
Go on set with photographer Ab Sesay for a dramatic 3-light beauty shoot using Elinchrom ELC 500 lights. For this shoot he uses a Sekonic L-308X-U Light meter to quickly dial in each light. Also see how Ab makes a simple lighting change to get different looks. In this video he uses a combination of gels, and scrims for some dramatic lighting effects.
Learn More on the Sekonic L-308x - bit.ly/3veGwhx
In this video, you’ll learn how to setup your C-800 Spectrometer to customize it to your preference for quick and easy operation.
Chapters:
Intro: 0:00 - 0:37
Setting overview: 0:38 - 1:34
Shutter speed step: 1:35 - 1:52
LB step: 1:53 - 3:04
Camera filter brand: 3:05 - 3:34
Lighting filter brand: 3:35 - 4:02
White balance step: 4:03 - 5:31
Unit of illuminance: 5:32 - 6:27
Color space for hue/saturation: 6:28 - 8:28
Spectrum Y-axis scale: 8:29 - 9:59
Auto power off setting: 10:00 - 10:17
Backlight brightness: 10:18 - 10:43
Auto dimmer: 10:44 - 11:00
Language: 11:01 - 11:11
Initialize customize items: 11:12 - 11:43
Preset editing: 11:44 - 13:55
Dark calibration: 13:56 - 14:35
Product Information: 14:36 - 14:55
Regulation: 14:56 - 15:13
Toolbox overview: 15:14 - 15:52
Preset selection: 15:53 - 16:31
Memory title: 16:32 - 17:10
Memory management: 17:11 - 19:08
Hardware setting overview: 19:09 - 19:36
Adjust touch panel: 19:37 - 20:05
Edit user information: 20:06 - 20:36
Factory setting: 20:37 - 21:34
We are immensely humbled and proud to be celebrating our 70th Anniversary in 2021.
Visit 70th.sekonic.com to share our journey and check out the L-398A Studio Deluxe III 70th Anniversary Edition. Based on the original 1956 version of the "Studio Deluxe" meter, this anniversary edition of 700 is available in a burgundy and rose gold - and won't last long.
Thank you for your support over the years. Here's to another 70!
0:20 - Introduction
0:42 - Metering the Flash Exposure
1:06 - Ambient Exposure
1:26 - More Metering
2:25 - Overall Recipe
2:57 - Shooting Tip/Technique
Learn More on the L-858D: bit.ly/30s1gl6
#Ambient #Strobe #lightinghowto #DoItWithSekonic
In this video, we will review the installation of the RT-BR transmitter module, and walk you through each radio triggering mode and best practices for using your L-858D-U SpeedMaster.
Chapters:
0:00 Intro
01:31 Radio Triggering Flash mode
01:39 Radio Triggering Multiple (Cumulative) FlashMode
01:55 Flash Duration Analysis Radio Triggering Mode
02:44 Power Control
04:30 Radio Triggering Multiple (Cumulative) Flash Mode
05.25 Flash Duration Analysis Radio Triggering Mode
05:43 T-Values
#Sekonic #Broncolor #Photography #Metering #QuickStart
Kit: bit.ly/3k2XMhe
Transmitter Only: bit.ly/3iZCDD5
In this video, we will review the installation of the RT-GX transmitter module, and walk you through each radio triggering mode including HSS and best practices for using your L-858D-U SpeedMaster.
Chapters:
0:00 Intro
01:15 Radio Triggering Flash mode
01:23 Radio Triggering Multiple (Cumulative) FlashMode
01:39 HSS Flash Radio Triggering Mode
01:53 Flash Duration Analysis Radio Triggering Mode
05:15 Power Control
06:53 Radio Triggering Multiple (Cumulative) Flash Mode
07:50 HSS Flash Radio Triggering Mode
08.38 Flash Duration Analysis Radio Triggering Mode
10:22 T-Values
#Sekonic #Metering #Photography #QuickStart
Kit: bit.ly/2FAMulo
Transmitter Only: bit.ly/33ZoGko
Broncolor Users, we got you! Sekonic has made the L-858D compatible with Broncolor strobes via the RT-BR transmitter module. Take the guesswork out of getting to the right exposure!
_______
Sekonic has made the L-858D compatible with Broncolor strobes via the RT-BR transmitter module.
You can also access all 99 Radio Studio Addresses.
You can also access studio addresses 1-34.
And 40 Lamp Addresses.
You can even take advantage of features like flash analyzation, which shows you the percentage of flash in your total exposure. So you know how much ambient light you have.
And Flash Duration to know you have maximized your flashes ability to freeze motion, and much more.
Shooting couldn’t be more simple.
Simply Go to the measuring mode screen.
Select Flash Radio Triggering Mode
Set your Radio Studio Address
Set your Lamp Address
Now quickly dial in your exposures without all the guesswork.
And you’re ready to go.
Complex lighting setups just got easier.
In the Flash Power Control Screen, you can easily raise and lower the power of each lamp address separately.
and then fire all your lights to take an updated measurement.
In addition, you can turn ON or OFF your modeling lamp.
Using a meter simply makes you more aware of your lighting.
Take the guesswork out of getting to the right exposure.
When you have a lighting setup you love, make a diagram, and write down your meter settings so you can repeat it later.
Or if you’re a teacher, you can now share details with your students like, exactly what your lights meter at, and what your percentage of flash is.
We have also created a quickstart video that guides you step by step on how to set up your L-858D from start to finish.
We are excited to welcome Broncolor users into our community.
#Sekonic #Broncolor #L858D
Kit: bit.ly/37rk5cm
Transmitter: bit.ly/3iZCDD5
Godox User, we got you! Sekonic has made the L-858D compatible with Godox strobes via the RT-GX control module.You can also access all 32 Channels, 16 Groups, and set your wireless ID, to prevent others from firing your lights. Complex lighting setups just got easier!
_________
Sekonic has made the L-858D compatible with Godox strobes via the RT-GX control module.
Now wireless HSS can be measured from the palm of your hand.
You can also access all 32 Channels.
16 Groups.
And set your wireless ID, to prevent others from firing your lights.
You can even take advantage of features like flash to ambient percentage. So you know how much ambient light you have.
And Flash Duration, to know you have maximized your flashes ability to freeze motion, and much more.
Shooting couldn’t be more simple.
Let’s start with what everyone is excited about, HSS metering.
Simply Go to the measuring mode screen.
Select HSS Flash Radio Triggering Mode
Set your channel
Set your group
And you’re ready to go.
Now quickly dial in your HSS exposures without all the guesswork, every time you change a power setting or shutter speeds.
Complex lighting setups just got easier.
In the flash control screen, you can easily measure each group individually, to know exactly what your lights are doing.
and power them up and down individually, or all at once.
you also have full control to power on and control the output of your modeling lamp.
Using a meter simply makes you more aware of your lighting.
Taking the guesswork out of getting to the right exposure.
When you have a lighting setup you love, make a diagram, and write down your meter settings so you can repeat it later.
Or if you’re a teacher, you can now share details with your students like, exactly what your lights meter at, and what your percentage of ambient to flash is.
We are excited to be welcomed into the Godox Community.
We have also created a quickstart video that guides you step by step on how to set up your L-858D from start to finish.
#Sekonic #Godox #L-858D #Photography #Lighting
event.webinarjam.com/register/24/ml863t7v
Featuring Tim Kang from Quasar Science and Ab Sesay from Sekonic - Join us live Thursday, July 9th 4:00pm EST (1:00pm PST)
"The key to finding your own style/voice is to trust yourself (over everyone else). That can be one of the most difficult things to do because we all have self doubt. The more you put yourself and your flaws into your work, the more personal, meaningful and cathartic it becomes and the foundation of your message will become recognizable."
00:42 Look #1 - Basic Portrait Setup
02:23 Look #2 - Dramatic Overhead Beauty Shot
04:23 Look #3 - Dramatic High-Key Beauty Setup using V-Flats
05:52 Look #4 - Lighting Model & Background With One Softbox
07:41 Look #5 - Creating 2 Different Looks by Adjusting Light Position
Download the Lighting Diagrams: bit.ly/3I3FZCa
Learn More on the L-858D: bit.ly/3GOd2cY
#1Light5Looks #lightinghowto #DoItWithSekonic
“There are no shortcuts, only massive amounts of hard work and dedication by a focused team to have a successful production. It’s way more fun when everyone is happy. ”
— Tim Tadder
Join us at 4:00pm ET on Thursday May 7th, 2020 for this epic interview.
See more of Tim's work here:
timtadder.com
00:25 Know the size of your room (think: ceiling height!)
00:50 Simplify your lighting - main and fill
01:30 What lighting and supports to use
02:29 Choosing props
03:07 Why is a meter important?
03:55 Rethinking simple things
04:30 Three setups in one
05:35 Wrapup
See results photos: instagram.com/p/B-PsK7oJ_di
Gear List:
Sekonic L-858U: sekonic.com/exposure-meters/l-858d-u
Kupoles: kupogrip.com/studio-support/kupole-system
Convi Clamp with handle: kupogrip.com/kupo-convi-clamp-with-adjustable-handle-black
Convi clamp: kupogrip.com/kupo-convi-clamp-black
Hex J-Hook 2 pack: kupogrip.com/kupo-hex-j-hook-2-pack
C-Stands (many heights, many styles): kupogrip.com/stands/c-stands-c-stand-accessories
40in Master C-Stand with sliding leg - silver: kupogrip.com/kupo-40in-master-c-stand-with-sliding-leg-silver
Rolling stands: kupogrip.com/stands/roller-stands
Kupo Junior Roller Stand: kupogrip.com/kupo-lowboy-junior-roller-stand
Booms: kupogrip.com/studio-support/booms
Hurricane Hazer Smoke Machine: chauvetdj.com/products/series/hurricane
Bauer Leaf Blower: harborfreight.com/20V-Hypermax-Lithium-Ion-Cordless-338-CFM-Jet-Fan-Blower-Tool-Only-64942.html
Apple Boxes: kupogrip.com/grip/apple-boxes-cushions
Atmosphere Aerosol in a Can: atmosphereaerosol.com
Gravity Backdrops: gravitybackdrops.com/shop
Photographer: Ab Sesay instagram.com/absesay_photo
Model: Madlena Kalinova @madlenakalinova
HMU: Katy Albright @katyalbright_hmua
Follow Sekonic on Instagram: instagram.com/sekonicglobal
Join Sekonic on Facebook: facebook.com/sekonic
#homephotostudio #lightinghowto #DoItWithSekonic
Portrait and Fashion Photographer Lindsay Adler shares 3 tips for freezing motion in the studio.
#Photography #Tips #FlashDuration
Photographer/Director Alexis Cuarezma brings us behind the scenes and discusses the importance of a light meter while he is on set.
#Photography #Metering #Lighting
Follow along as we show you how to use the Sekonic C-800 to get the best match between different light sources. We will also discuss matching color temperatures as well as compensate for any green or magenta tints, unlocking the power of x,y, and discuss matching saturated Party Gel Effects between RGB LED’s or gelled light sources.
______
In this video we are going to use the Sekonic C-800 to get the best match between different light sources. We will demonstrate how to match color temperatures as well as compensate for any green or magenta tints. We will unlock the power of x,y, and….we will also discuss matching saturated Party Gell Effects between RGB LED’s or gelled light sources.
Lets start with how to match lights using traditional gels.
On most shoots we simply want two light sources to have the same color temperature and no green or magenta tints. First we need to establish a target, or a light source we want to match.
The target is the desired color temperature you want a light to be.
If your light has a fixed color temperature, then we will get to the target color temperature using Gels, This is simple. Select the Filter Mode icon, and make sure the lighting filter is selected, denoted by the light icon.You can switch from lighting filters or camera filters simply by selecting the middle button. CCT, shows your correlated Color Temperature. LBi, Light Balance Index, is and index of how warm or cool a light is. LBlf, Light Balancing Light Filter is the filter or filters to use in order to adjust the Color temp, CCi Color Correction Index, an index of how green or magenta a light is and… CClf, a filter or combination of filters to eliminate any green or magenta tint a light might have. Now lets correct this tungsten balanced light to 5500k. Enter the target color temperature of 5500k. Take a reading of your light, and then see what the meter recommends.
CCT tells us the measured light’s color temperature.
LBi tells us the Mired shift, or how far off the light is from the target color temperature.
LBlf tells us how much CTO or CTB filtration we need, to get the measured value as close to the target as possible. CCi tells us how many points of correction are needed to correct for a green or magenta shift. Remember M means you will need to add magenta to correct for a green cast, and G means you will need to add green to correct for a magenta cast.
and CClf will tell us how much minus or plus green filtration is needed to get the lowest CCi possible. Please remember that the gels shown for CClf and LBlf need to all be used in combination with each other to match your light to the target color temperature.
A dashed line means that no correction is needed, or the correction is so minimal that no filter is available. Before we continue, here are some quick tips when it comes to matching lights.
Now if you have an adjustable or bi-color LED | the steps are even easier, and the C-800 unlike many of its counterparts can | continuously measure as you dial in your correction. To get the desired target color temperature...Simply hold the measure button down, while you adjust your lights color temperature, And continue to hold it down | while adjusting your lights green and magenta tint to achieve the lowest CCI as possible.
This is great when needing to match lights in locations you cannot control, or if you need to quickly dial in a saturated hue, such as a light with a party gel.
Measure each light, and save it to the meters memory. |Then recall the lights from memory in spectrum comparison mode.
If the two lights have a different spectral fingerprint they will never be able to achieve a perfect match on camera, | but the meter will get you as close as possible.
Some gaffers have even found that when looking to get extreme colors from LED lights that geling them in normal CCT mode yields more predictable results and better color rendering.
But always test on camera to be sure.
So in conclusion the Sekonic C-800 will enable you to get the best match between different light sources.
We have learned how to match color temperatures as well as compensate for any green or magenta tints.
We’ve unlocked the power of x,y, and….
discussed matching saturated Party Gell Effects between RGB LED’s and gelled light sources.
Now during your next production you will be able to get the best match between light sources with the Sekonic C-800.
#ColorTemperature #Cinematography #Gels
Flash Duration Explained - bit.ly/3g0gOTJ
L-858D Meter - bit.ly/2Tks1VE
Follow along as Photographer Ab Sesay goes in-depth on the benefits of flash duration while we simulate a daylight shoot.
#flashduration #lightinghowto #DoItWithSekonic
The Sekonic C-800 is able to measure CRI, TLCI, TLMF, TM-30 and SSI. All these indexes have been designed to give you confidence in the color rendering of the lights that you are using. This video will discuss what each of these indexes mean, and how you can use the C-800 to evaluate and measure them.
Reference Links:
Tech3355 document released by the EBU
https://tech.ebu.ch/docs/tech/tech3355.pdf
Protocol Fall 2015 TM30 - By Mike Wood
mikewoodconsulting.com/articles/Protocol%20Fall%202013%20-%20TLCI.pdf
Understanding & Applying ™-30-15 - By Michael Royer & Kenin Houser
energy.gov/sites/prod/files/2015/09/f26/tm30-intro-webinar_9-15-15.pdf
More About SSI
oscars.org/sites/oscars/files/ssi_overview_2019-03-04.pdf
______
The Sekonic C-800 is able to measure CRI, TLCI, TLMF, TM-30 and SSI. All these indexes have been designed to give you confidence in the color rendering of the lights that you are using. This video will discuss what each of these indexes mean, and how you can use the C-800 to evaluate and measure them.
We will help you choose which one of these indexes, or a combination of indexes that you may want to provide increased confidence in the lighting you use for your next production, and how to evaluate the information the C-800 gives you.
Before getting into these indexes there are a few things we would like you to understand.
First, we want you to understand the observer. The observer is what each of these indexes uses in order to measure the quality of their score. For example CRI and TM-30 will use human vision as the observer. TLCI will use a 3 chip broadcast camera as the observer, and SSI removes the bias of the observer all together.
Second, we want to explain what problem each of these indexes was designed to solve for… and how you can interpret its information to help out with your next production. CRI, Color Rendering Index, is based upon the evaluation of 15 colors, using the human eye as the observer.
The first 8 colors are what the Ra or CRI score is based on, and R9 through 15 are additional colors that allow you to further evaluate the quality of a light source.
You may hear of CRI extended, which is a score given based upon the evaluation of all 15 colors, but it is not the standard that lighting manufacturers are using when scoring their lights.
CRI was designed to score a light based upon how the human eye would be able to accurately perceive colors under ideal daylight conditions.
It allows us to examine how light sources that attempt to reconstitute daylight such as Mercury Vapor, Fluorescent, Incandescent and LED will perform. But originally it was designed to judge fluorescent lamps.
OK, so how can you use the C-800 CRI readout to evaluate the lights you intend to use.
Please note that this next section is bias toward what a filmmaker may look for when evaluating a light.
CRI is measured from 0-100. A Ra value between 85 - 95 is seen as good, and above 95 as exceptional. For image makers this doesn't mean a light is going to be good or bad. It simply a score based upon 8 very muted colors. In today's manufacturing process of LED’s, a lighting manufacturer can tweak “game” their lights to score high, but it may still not give you skin tones similar to standard tungsten or standard daylight.
Most gaffers and DP’s that trust CRI look at R9 Strong Red, R13 Light Yellowish Pink, and R15 Asian Skin Tone, to see how well a light is going to render skin. If a light has a high CRI (Ra) value and R9, R13 and R15 values above 85 most predict that it will give you pleasing skin tones. If R10 yellow, R11 green, R12 blue and R14 Moderate Olive Green (leaf) score high as well. You most likely have a light that won’t suffer from severe color rendering problems.
FREE! Download Lighting Diagram: bit.ly/36c2cvS
Lights: Profoto Pro 08
Spot Light: Elinchrom 18-36 Degree Spot Light
Ring Light: Profoto Pro-Ring Flash
Studio: Go-Studios NYC
Camera: Canon 5DMIV
Lens: Canon 24-70mm F2.8 II
Photographer: @absesay_photo
#portraitlighting #lightinghowto #DoItWithSekonic
FREE! Downloadable PDF:
bit.ly/3e07nlB
Read the Article:
bit.ly/36b0xaf
Learn more about the Sekonic L-478D LiteMaster Pro:
bit.ly/2Tx9fun
#gelsforflash #lightinghowto #doitwithsekonic
In this video, we will guide you through setting up your Sekonic C-800 Spectrometer meter, and give you a brief overview of its basic functions.
______
Welcome to the Sekonic C-800 Spectrometer Quick Start Video Series. The quest for lighter, smaller and more efficient light sources has creating new challenges in color quality control and interpretation of color for various CINE and Video productions. Matching the same and different light sources and knowing how to mix LED, Plasma, Tungsten and Daylight are essential for today’s CINE and Video production.
Sekonic Corporation a light measurement leader for over 6 decades is proud to provide its newest measurement tool that is designed to help you control the quality of light in any demanding lighting scenario. The New SEKONIC Spectrometer C-800 is a portable handheld spectrometer designed especially for CINE, Video, and Still Photography use. It measures every light source such as LED, Fluorescent, Tungsten, HMI, Natural Light and even electronic flash. Utilizing Sekonic’s CMOS Linear image sensor design especially and specifically developed software, the C-800 can measure and display the spectrum of every light source with the precision and data display that you need. In the videos that follows, we’ll help you set-up your spectrometer, guide you through the basics of color measurements, and even show you a few advanced features and functions. Let’s get started In this first video, you’ll learn how to get your C-800 up and running and get a brief overview of its basic functions. Let’s take a quick tour of the Sekonic C-800. With its user friendly design the C-800 Spectrometer has a swivel measuring head that rotates 270 degrees and incorporates the CMOS Linear Sensor. In addition, the Light Receptor includes a Light Selection Ring that provides settings for CAL , Sun/Flash Icon and Flash /H Icon. Moving down the meter you’ll notice the large 4.3” LCD Color Touch Screen make it a breeze to navigate though all major functions. From the LCD screen let’s move to the POWER Button located on the left side of the meter, which turns the meter on or off. Directly below the POWER Button is the MEMORY button. The MEMORY button when pressed in the proper mode stores up to 99 measured values for recall and review later. Memory titles can be edited in the C-800 Utility Software included. In addition, memorized values can be saved between the meter and computer easily. On the opposite side of the meter is the MEASURE button, which when pressed takes the current measurement of the light source. Just below the LCD screen you will notice the MENU button. This button always returns you to the DISPLAY MODE SELECTION screen. Located on the bottom of the meter are two hidden connectors. The first is the PC Flash Terminal for use with Electronic studio strobes. The second connector is a MINI-B USB port for connection to a computer for firmware update and application software. On the backside of the C-800 is a convenient ¼-20 threaded socket to attach various mounting solutions. Below the mounting socket is the battery compartment, which accommodates the batteries. First, let’s install the batteries... ...simply slide the battery door lock in the direction of the arrow and lift the battery cover on the back of the meter and insert the batteries. The C-800 takes two AA batteries. Before powering on the C-800, rotate the Light Selection Ring, so that it is aligned with CAL (Dark Calibration position). Press and hold the power button until the screen displays the Sekonic logo start-up screen followed by the Dark Calibration in progress bar. The spectrometer is ready to use when the Display Mode Selection screen is displayed. Before we start measuring with the C-800 it’s very important to turn the Light Selection Ring to either Low or High Ambient /Flash Range. For most applications, we can select Low Range. Continuing our tour let’s take a look at the STATUS BAR…… The STATUS BAR remains nested on the top area of most screens. Now let’s take a look at the DISPLAY MODE SELECTIONS You can select one of the display modes by touching one of the icons on the screen. There are 12 different icons you can choose. Let’s start with the TEXT icon first. After touching the TEXT icon, the C-800 displays the Measuring Screen. For your reference, you will notice that touch-enabled Icons always have a blue illuminated line below the icon. If an icon doesn’t have the blue illuminated line it is touch disabled. There are three different measuring modes. To change the Measuring Mode, touch the Measuring Mode icon in the upper left hand corner. On this screen you can select: ➢ Ambient Mode ➢ Cordless Flash Mode ➢ Cord (PC) Flash Mode Once you have made a selection touch the OK button and the screen will return to the Measuring Screen.
#ColorTemperature #Cinematography #Metering
In this video, we will guide you through setting up your meter, and give you a brief overview of its basic functions.
#Photography #Metering #Lighting
This video will walk you through the advanced photography features of the Sekonic SpeedMaster L858D. Learn everything you need to take your photography to the next level with the L858 Speedmaster from Sekonic. The ultimate tool for professional photographers and cinematographers
______
In this video we are going to review the Advanced Photography Features of the Sekonic SpeedMaster L858D.
We will review Ambient Measuring modes.
Flash measuring modes,
HSS Measuring mode,
And Flash Duration Measuring Modes.
We will also review the basics of using radio triggering and,
Walk you through the most common functions of the tool box | and custom functions.
Ambient Measuring Modes
Let’s start by reviewing the Ambient measuring modes.
T is for Ambient Shutter Priority
F is for Ambient Aperture Priority
TF is for Ambient ISO measurement in which shutter and aperture are locked.
Flash Measuring Modes
Now let’s review the Flash measuring modes
This Flash icon is for cordless flash mode.
When you press the measure button the meter will | wait until it sees a flash go off, | and then provide you with a measurement.
In multi mode it will give you a cumulative reading of multiple flashes.
The Flash c icon is for cord flash measurement mode. | To be used in conjunctions with a flash synchro-cord.
The Flash c multi icon is for cumulative readings| when using a synchro-cord.
The Flash Antenna Icon is for radio flash measurements. | This icon appears when you use the optional radio transmitter.|
The Flash Antena multi icon is for cumulative reading when using a radio transmitter. | Again, this icon appears when you use the optional radio transmitter.
HSS & Flash Duration Measuring Modes
The HSS Icon is for | measuring the flash output when using high speed sync.
Below this you have FDA for Flash Duration Analysis measurement icons.
For uncorded, Corded,
And radio triggering with the optional radio transmitter.
Next let’s explore how to customize the icons shown on the measure mode screen.
Select the Menu Button
Select Custom Settings
Scroll down to page 2
These four setting allow you to control what measuring modes are shown on the measuring mode screen. For instance
Select Ambient Mode
You can deselect these Cine Modes if you plan to only shoot photos. Now you can see only the selected modes from our custom functions screen show up.
Lets review the HSS mode
HSS is used when you shoot with flash above your cameras normal flash sync speed.
Metering these small pulses of light has never been possible prior to the L858
First make sure the meter is in HSS Mode
In most cases you will need your camera to trigger the flash, in order for your strobe to fire in HSS mode.
It is also good to be sure TTL is turned off, as your exposure can change from shot to shot.
Using your camera with your desired shutter speed and ISO set.
Press the measure button on your meter.
Fire your HSS enabled lights from your camera.
And the 858 will give you your HSS measurement
If you are getting the “UNDER” reading, you may need to enter the number of pre flashes your strobe is using.
You can set the number of preflashes by going to the tool box.
Go To Page 02
Select the Number of Pre-Flashes, and close.
If you continue to get under readings, or the metered exposures are inconsistent. Please see the link below to see the list of compatible flashes. Flash duration Analysis mode, allows you to measure the flash duration of strobes.
You can use it in cordless, corded and wireless modes.
You can set your desired T value. Whether it’s T.1 or T.5
By going to the tool box.
Selecting page 02
Selecting Flash Duration Analysis t Value
Then enter a value between 0.1 and 0.9
And select ok.
Now you can measure flash duration.
Simply tap the screen to also see a graph of the flash.
Tap again to return to the Measuring screen.
The Sekonic 858D is currently compatible with | PocketWizard, | Elinchrom and Phottix receivers.
There are three radio transmitter modules available.
The RT-20PW for Pocketwizard US/Canada frequency (344Mhz), the RT-3PW for PocketWizard European frequency (433Mhz) and the
RT-EL/PX for Elinchrom & Phottix (2.4Ghz).
There is a space under the batteries when you open the back of the meter to insert the transmitter.
Once inserted you will see | the available radio transmitter measuring modes appear on the measuring mode screen.
The power control screen allows you to adjust the power | of compatible strobes.
And by going to tools - Page 2. You can adjust your radio frequency.
You now know everything you need to take your photography to the next level with the L858 Speedmaster from Sekonic. The ultimate tool for professional photographers and cinematographers.
#Photography #Cinematography #Metering
The Future of Color Control Has Arrived! The Sekonic Spectrometer C-800 offers ultra-precise color measuring performance designed specifically for cinematographers and photographers.
_______
The Future of Color Control Has Arrived!
The Sekonic Spectrometer C-800 offers ultra-precise color measuring performance designed specifically for cinematographers and photographers.
This meter will have more Color Rendering Modes then any meter on the market with the inclusion of SSI, and new methods of matching RGB LED’s to any existing light source.
The C-800 will be the first meter on the Market to Include SSI, the Spectral Similarity Index. This is technology developed by the Academy of Motion Picture Arts and Sciences, Science and Technology Council.
With so many different light sources. Knowing how they will render color, and work together can be a question The C-800 is the answer. It has CRI, TLCI, TLMF, TM-30-15 and the revolutionary SSI.
Why is the C800 and SSI so revolutionary? SSI looks at how spectrally similar two lights are. Have you ever had two lights with the same color temperature or similar CRI that look radically different? SSI solves for this by giving your lights a score based upon a standard illuminante, or it lets you choose the primary source, to compare your other lights to..
Now mix light sources with increased confidence that your colorist won’t need to spend extra hours correcting what can be done in production.
There are times in which our location may contain fluorescent, sodium vapor, and consumer LED’s. These can be difficult to match.
The C-800 gives you the ability to measure any of those light sources, and recommends the filters to get the best correction.
It also lets you dial in RGB LEDs With (x, y) chromaticity coordinates and hue saturation readouts. You can measure any light source, then easily dial in the (x,y) coordinate. Or measure a light as you adjust its Hue Angle.
The C-800 also has Lee and Rosco gels built in for traditional color correction of lights, and Kodak Wratten, Lee, and Fuji filters built in for Camera correction.
The C-800 is designed to be used on set.
Easily accessible buttons. For quick operation.
Built in dark slide, for dark calibration on set.
Eliminate accidentally changing settings. Simply hold the MENU button for a few seconds, and you can lock the touch screen, while the measuring and memory buttons remain active.
The head swivels 270 degrees to measure a light and keep the screen in view.
And you can now store and recall up to 99 measurements, and move them back and forth between your meter and computer.
The C-800 has been engineered to be exact, and designed to be the ideal meter to use on set.
#FutureOfColor #Sekonic #Cinematography #Metering
In this quick start video series, we will walk you through how to get your L-858D up and running, while providing a brief overview of it's functions. The SpeedMaster L-858D is the ultimate tool for photographers, cinematographers and videographers.
Learn how Matthew Jordan Smith uses a direct theatrical spot light for dramatic beauty lighting.
#DramaticLighting #Photography #Metering
Learn the in’s and outs or this this three light beauty setup. Using a beauty dish a reflector and two normal a reflectors to create flattering lighting effects.
#DramaticLighting #Photography #Metering
Learn the ins and outs of hard directional beauty lighting.
#DramaticLighting #Photography #Metering
The Sekonic L-308X-U meets the needs of the next generation of photographers and filmmakers by combining multiple measuring modes and features into one single, easy-to-use meter.
_______
The Sekonic L-308X has been designed to meet the needs of the next generation of image, and film makers. It blends the best features of the 308S and 308DC with some added functionality.
For Professionals. Carry a second meter for your assistant, or easily fit into your pocket to take on tech scouts.
For Beginners you will have a profoundly accurate meter to get proper exposures | and start developing lighting recipes to use for years to come.
And for passionate film shooters this is the perfect meter to pair| with your vintage film cameras for accurate exposures.
The 308 X has three Display modes.
Photo with Ambient, Cordless Flash and Corded Flash Modes.
HD_Cine for DSLRS and Mirrorless Cameras. Allowing you to select your shutter speed, frame rate, and illuminance mode.
And Cine Mode For Cinema Cameras. Allowing you to select your frame rate, Shutter angle, and illuminance mode as well
Accuracy is the legacy of the 308 series.
The 308X is able to measure light from 0 to 19.9 EV at ISO 100.
Your exposures are guaranteed to be spot on with this meters repeat accuracy within plus or minus 0.1 EV.
You can also match your L-308X to another meter or your camera’s exposure by calibration compensation function with the range of plus or minus 1 EV in 0.1 step increments.
A clutter free interface, and ergonomic design make the 308 a breeze to use.
The Sliding lumisphere reveals a lens with 40 degree reception angle for reflected light measurement.
The optional lumidisc enables you to measure the light ratio or the exposure of a flat subject.
And as always the single AA battery will get you through many shoots.
We’ve included a Backlit LCD screen that automatically turns on in dim lit conditions under EV 5.
and aperture priority in Photo Ambient Mode.
From previous 308 models we have added ISO 850, a base for some very popular cine cameras.
Chapter 05 Wrap Up
Now you can always have a meter with you for location scouting and second assistants.
Doing a two person interview? Make sure each of your subjects is equally illuminated.
Resurrecting that old film camera for some classic portraits? Make sure your exposures are right on.
The 308X is the perfect blend of features to be your first meter, and the meter you always have with you..
The 308X is the second perfect blend of features to be your first meter for beginners, and the second meter you always have with you for pros.
#Photography #Metering #Filmmaking
Director of Photography Timur Civan discusses the importance of proper color balance when lighting a scene, and how Sekonic's C-700 Spectromaster comes in handy when using LED lighting during production.
#Cinematography #Color #LED #Lighting
The first meter of its kind capable of measuring flash, while also being able to achieve an accurate ambient exposure reading in dimly lit scenes as low as 0.1 lux. Plus, swappable modules allow for PocketWizard, Elinchrom and Phottix compatibility. The Sekonic L-858D provides image-makers of all levels with the critical exposure data they need to create stunning and beautiful imagery.
_____
The Sekonic L-858D is a revolutionary light meter.
The first to Meter Flash Duration.
The first to allow for wireless triggering of Elinchrom Skyport, Phottix Strato and PocketWizard.
Built in Spot Meter
Increased 3 Stops of Sensitivity for incident light| 2 Stops of Sensitivity for reflected light (spot).
And weather-sealed ports make it the last meter you will ever need to own.
Flash duration has been the secret to how many photographers have frozen the fastest moving subjects.
Breaking the 1/8000th of a second barrier of most cameras.
But also letting you freeze motion at super fast speeds while still only shooting at your camera's max sync speed.
Know when your flash is going to deliver results like these tack sharp splashes,
Or leave these less desirable trails.
You can even see the percentage of ambient light in your exposure to make sure you're getting it’s full stopping power of your strobes.
Also many photographers are now taking advantage of Hyper Sync & Hi Sync.
Hyper & Hi Sync allow you to take advantage of slower flash durations, letting you to use higher shutter speeds, to better freeze motion, especially if you’re in a situation where there is a large amount of ambient light.
Now with flash duration measurement you can unlock the full potential of your strobes.
Wireless control just went to another level.
There are three available radio modules.
One for PocketWizard US Frequencies, One For PocketWizard International Frequencies, and one that combines both Elinchrom and Phottix into a single module.
With the PocketWizard module you can easily trigger any pocketwizard wirelessly, and control the power on any Control TL Compatible Units.
With the Combined Elinchrom & Phottix Module you have full Skyport triggering Skyport power-control capabilities, and Phottix Strato capabilities as well.
With these three options to trigger your lights, wireless triggering just went to another level.
Now with HSS Measurement. Take the guess work out of what your lights are metering when using high speed sync.
When using flash. The shutter speed range goes past the 1/1000 of a second of most meters, to record breaking 1/16000 of a second. Making it increasingly future Proof.
You can even program the number of Pre Flashes used to cancel them out of the main exposure.
The 2.7” Color Dot Matrix Touch Screen allows you to easily change settings.
With the increased sensitivity of the built in 1 degree spot meter. Landscape photographers and still life photographers will rejoice.
Now with Cameras that virtually see in the dark, your meter should too.
The L-858D has an increased sensitivity.
No matter how dim your lights, this meter will measure Illuminance down to 0.1 lx.
Your subject could be several feet away from a candle-lit scene, and you could still meter it.
You will no longer be left in the dark no matter how dim your scene is.
With the 858 you can stay up to date with the included Data Transfer Software, that allows you to....
Update the firmware when needed.
Profile your meter, and store up to 10 custom exposure profiles for different cameras, using Sekonic, X-Rite or Datacolor Targets.
Keeping your meter up to date, calibrated and profiled has never been easier.
CINE FUNCTIONS
And if you're a photographer transitioning or shooting film.
The Sekonic 858 is a fully functioning Cine Meter. Simply choose from HD for DSLRs, or CINE for Motion Picture Cameras.
The available ISO's have been expanded to include the native ISO's of some of today’s most popular cameras as well.
The Sekonic 858 simply allows you to light better.
Create lighting recipes that you can repeat over and over again.
Understand what your light is doing beyond what your LCD can tell you.
And better understand the characteristics of your lights that are not seen by the human eye.
Break away towards the next generation of light measurement control with the Sekonic SpeedMaster L-858D Meter
#Photography #Flash #Cinematography
Featuring three stops of increased sensitivity, custom frame rates, and exposure settings, the Sekonic L-858D light meter provides image-makers of all levels with the critical exposure data they need to create stunning and beautiful imagery.
_____
The Sekonic L-858D is a revolutionary light meter.
Filmmakers, DP’s & Gaffers will rejoice at features such as increased sensitivity, built in Spot Meter and expanded ISO’s for any camera.
Cameras are becoming more sensitive by the day.
The L-858D is three stops more sensitive in incident mode and 2 stops more sensitive when spot metering. then its predecessor.
Now you have ISO 13Million-107thousand-2hundred, and sensitivity down to 0.1 lux.
Your subject could be several feet away from a candle-lit scene, and you could still meter it.
You will no longer be left in the dark no matter how dim your scene is.
Whether you're shooting or tech scouting a location this meter simply gives you information others cannot.
No matter the camera you are shooting this meter has you covered.
HD Cine mode is for DSLR filmmakers Allowing you to dial in your shutter speed, ISO and frames per second.
Cine Mode is for Digital Cinema and film cameras and allows you to dial in your frames per second, ISO and shutter angle.
Illuminance Mode is for simple evaluation of the brightness of your scene, or the precise brightness of your lights.
No matter the camera you are using we have a mode for you.
This meter isn’t only extremely sensitive.
We’ve included ISO’s such as 850 to match the native ISO’s of industry leading cameras.
We’ve made sure to include frame rates such as 23.97, 29.97, 47.95 and 59.94
You can also create your own frame rates, and shutter angle in Custom Setting in addition to the default settings.
No matter the camera you are using we have a mode for you.
Chapter 03 Other Features
The 2.7” Color Dot Matrix Touch Screen | allows you to easily change settings on the fly
The 1 degree spot meter is perfect for checking if your scene is well balanced, even if objects are far away.
Save up to 30 of your favorite filters, to instantly know what exposure compensation needs to be considered.
With the 858 you can stay up to date with the included Data Transfer Software. Allowing you to....
Update the firmware when needed.
Profile your meter, and store up to 10 custom exposure profiles for different cameras, using Sekonic, X-Rite or Datacolor Targets.
Keeping your meter up to date, calibrated and profiled has never been easier.
WRAP UP
The Sekonic 858 simply allows you to light better.
Create lighting recipes that you can repeat over and over again.
Understand what your lights are doing beyond what your LCD can tell you.
Better evaluate and balance lights in your scene without needing to look at monitors.
Break away towards the next generation of light measurement control with the Sekonic SpeedMaster L-858D Meter
#Cinematography #Metering #Exposure
Understanding Flash Duration: bit.ly/2ZgjR4s
L-478 LiteMaster Pro: bit.ly/2ZhRnai
Sports and Adventure photographer Michael Clark discusses his light meter of choice, the Sekonic L-478-DR-U-EL, during a boxing photo shoot.
#FlashDuration #Photography #Boxing #Sports
Sekonic’s LiteMaster Pro for Phottix is here to make wireless metering accessible by all. It gives you repeatable results, and wireless metering, all in the palm of your hands.
_____
Sekonic’s LiteMaster Pro for Phottix is here to make wireless metering accessible by all.
Now you can create lighting recipes. Making it easier to recreate your favorite setups.
If there is a precise amount of fill flash that you have grown used to.
Say 70%...Only a handheld meter can give you this exact level of control.
With the Phottix Strato II Built into this meter. Wireless metering has never been more simple.
All you need is a set of lights with a sync terminal.
OR all you need is a set of lights with a sync terminal.
Just plug-in your Phottix Strato II
Or mount your shoe mounted flash on top.
Make sure your transmitter... receiver... and meter are on the same channels.
And now you can wirelessly meter your lights.
If you have a Phottix Indra 500, 360 or Mitros Plus then its even easier.
Simply put your Mitros Plus or Indra in Stratto II Mode, set the channel and group, and you’re good to go. Additionally, you can use your Odin II receiver on channels 1-4 to trigger your lights.
Also the interface couldn't have been made more simple.
Easily see what channel you’re on, and what groups are active.
By entering the flash control interface There are four groups that you can meter all together…. or individually.
For this shot our main light was set to f5.6
Our fill light was set to a half-stop under
and our background accent light was set to a stop-and-a-half over.
This gives you the benefit of creating precise lighting recipes for repeatable results.
Using a meter is all about control.
TTL has come a long way, but when you want precise control over your lighting. You need a meter.
Controlling your lights manually guarantees as you zoom or move around, and elements in your scene change. That your exposure doesn’t
Also when using multiple lights it makes setting up your ratios effortless and more precise.
The Sekonic L478DR-U-PX gives you repeatable results, and wireless metering, all in the palm of your hands. The Sekonic LiteMaster Pro for Phottix gives you repeatable results, and wireless metering, all in the palm of your hands.
#Photography #Metering #Fashion
In this Quick Start video you will learn how to measure and control one light source using the C-700 Spectrometer's TEXT, Spectrum and CRI screens.
_____
In this video you will learn how to
measure and control one light source
using the C 700 text spectrum and CRI
screens the C 700 introduction video
showed how to set up the text mode to
take a reading you learned that the blue
line under a button or icon indicated
the display information is adjustable
and that there were two pages in the
meters library from which to select the
first enables displaying correlated
color temperature CC and LB index camera
filtration light source filtration and
illumination values the second enables
showing color rendering index values ra
is the average of the first eight and
what the lighting industry calls CRI you
can also display any of the 15 special
values separately in this example we can
see that the meter is set to measure
continuous light and the target color
temperature is 4000 K the measured light
source has a color temperature of 2500 6
K the illuminance is 1320 Lux the CC
index indicates no green or magenta and
LB index of negative 149 which requires
a full CTB blue light filter and Ra is
99.4 if you're lighting world deals with
just daylight's incandescent lamps or
flash you know everything you need to
measure and control your lights
however today you will encounter
fluorescents LED HMI plasma sodium vapor
and a variety of new sources
now being developed all have different
color signatures which may be deficient
in one or many parts of the color
spectrum you need to know this
information to use these lights
effectively spectrum mode the SI 700
spectrum master was created to give you
the full spectrum information you need
touch the second icon to select the
spectrum mode the spectrum mode display
provides a color snapshot of the light
source output along with three measuring
units of our choice the vertical y-axis
represents the intensity of the light
source the horizontal x-axis represents
the wavelength from 380 to 780 nm
nanometer an incandescent source is
shown here for this example of an
incandescent source the correlated color
temperature is 2484 K which will require
both a full and one-eighth CTB as well
as a 1/8 + g CC filter to balance the
light to the 4000 K target temperature
like with the text screen the spectrum
mode has blue lines under the displays
so you can select which numeric values
you want to see to see a larger more
detailed image of the light source
snapshot touch the plus magnifying glass
on the screen
touch the - magnifying glass to return
the display to normal measuring mode
color rendering index CRI mode the
spectral quality of a light source will
affect how faithfully a color is
illuminated by that light source the
color rendering index or CRI is a group
of measured values of specific colors
measured under an ideal light source
numerical values from 0 to 100 describe
the quality of the color appearance a
CRI of 100 indicates a perfect rendering
of the color touch the 4th icon to
select the CRI mode on the display
selection screen the CIE 700 provides
two ways to judge color appearance ra
the average of color values are 1
through our 8 which is the industry
standard or you can observe each value
r1 through our 15 separately the actual
values of a measured light source are
displayed by numerically and by a
convenient color bar graph of particular
interest is our nine pure red as this
color will not be rendered well under
fluorescent and other discontinuing
light sources
#Photography #ColorSpectrum #Metering #Measurement
The quest for lighter, smaller and more efficient light sources is creating new challenges in establishing color quality for Cine/Video production. Matching the same and different light sources, and knowing how to mix them are becoming today’s need-to-know skills. Sekonic is proud to provide the measuring tool that will help you tame the lighting universe. The Spectrometer C-700.
_____
Welcome to the Sekonic C-700 Spectrometer Quick Start Video Series.
The Quest for lighter, smaller and more efficient light sources is creating new challenges in establishing color quality for Cine/Video production.
Matching the same and different light sources, and knowing how to mix LED, Plasma, Tungsten and Daylight are becoming today’s need- to- know skills.
Sekonic Corporation, a light-measurement leader of over six decades, is proud to provide the measuring tool that will help you tame the lighting universe. The Spectrometer C-700.
The new Spectrometer C-700 is a portable handheld spectrometer, designed especially for Cine/Video/Still Photography use.
At the bottom of the meter are two covered connectors. The first is a PC Flash Terminal for use with Electronic studio strobes.
The second is a MINI-B USB port to connect the C-700 to a computer for firmware updates and use the application software.
On the back of the C-700 is a convenient ¼-20 threaded socket that allows mounting the meter for various applications.
The battery compartment is just below the mounting socket.
Let’s install the batteries...
...simply slide the battery door lock in the direction of the arrow and lift the battery cover on the back of the meter. Then insert the batteries. The C-700 takes two AA batteries.
Now, let’s power up the C-700 for the first time.
First, rotate the Light Selection Ring, to align the raised indicator with the Dark Calibration position (CAL).
Then, press and hold the power button until the Sekonic logo and start-up screen appears, which is followed by the Dark Calibration progress bar.
The C-700 is ready to use when the Display Mode Selection screen appears.
Normal start up is faster. You see this longer sequence after not using the meter for some time or after changing batteries.
Turn the Light Selection Ring off of CAL and onto one of the measuring settings.
For most readings, you will be using the center position (Sun/Flash).
The High Range is used for measuring very bright studio flashes,
Continuing our QUICK TOUR, Let’s take a look at the STATUS BAR at the top of the screen…..
The STATUS BAR appears at the top of most screens.
It provides status feedback of:
Battery Capacity
Memory Count
Digital or Film Display Mode
Preset Selection
Temperature Fluctuation Warning
Light Selection Ring position
Key Lock Status
Now, let’s explore the DISPLAY MODE SELECTION screen
Select the desired display mode by touching one of display mode icons on the screen. There are 9 different icons you can choose.
Touch the TEXT Icon.
And the screen displays the TEXT Screen.
Note the blue line that appears below the icon and display buttons.
This line indicates that the type of information displayed in the area is selectable by you.
We are just a few more settings away from our first measurement.
To assure we get the data we need we have to select the Measuring Mode and Target color temperature.
Touch the Measuring Mode icon to move to the selection screen where you can set the C-700 to measure : Touch the ‘Ambient Mode’ button to select it and return to the Measuring Screen
Now touch the ‘Target Color Temperature’ button to go to the setting screen. In Digital Mode, you can set the target from 2,500 to 10,000 Kelvin.
It’s set at 5000K now. Let’s warm up the light a bit by selecting 4800K
Then touch OK to lock in the target and return to the measuring screen.
As I said earlier, you can select whatever you want to display and even decide the order they are displayed.
Simply touch the blue underlined button to go to the ‘Display Mode’ library to make your selection.
The first level deals with color temperature, filtration and brightness.
The second level lets you display Color Rendering Index values.
You will learn more about these in later videos, so let’s use the present settings and take a measurement.
Touch OK to return to the TEXT Mode Screen.
Now press the MEASURE button to take a reading.
You now know that the light being measured is
#ColorSpectrum #Photography #Metering
Lighting Solutions and applications have never been in greater demand as they are today. The need to understand, manage and control these light sources is essential. Sekonic is proud to provide the advanced and precise lighting control of the Sekonic SpectroMaster C-7000, designed especially for industrial use.
#Photography #Color #Measurement
In the latest Sekonic video, Joe Brady clearly and thoughtfully explores different lighting styles using the Sekonic 478-DR-EL light meter that could benefit both you and your clients.
#Webinar #Photography #Metering #Tips
Introducing the new LiteMaster Pro L-478DR-U-EL light meter from Sekonic. Featuring wireless radio triggering of Elinchrom flashes equipped with Skyport receivers, a separate selection of four groups plus 'ALL', and much more. With the LiteMaster Pro L-478DR-U-EL, you have all the control you ever wanted, right in the palm of your hands!
_____
The Sekonic L478DR-U-EL with Elinchrom Skyport Inside, is nothing short of a revolution in metering. Now you can take a meter reading, and adjust the power of your lights while never leaving your subject. You have the ability to quickly power your lights up and down, using 1 of 4 groups, or all together. How does it work? Simple. First you need Elinchrom Skyport Enabled Lights…. and a Skyport On-Top of your camera. Match the mode, normal or speed, on your meter, transmitter, and lights. Set the channel, and decide what lights you want on which group. And your ready to go. To quickly get started, Here are some best practices. If using with the Skyport HS, Press the refresh button after you have made adjustments on the meter, and the new settings will be reflected on the skyport HS LCD There are a few settings in your meter that you should be aware of. First lets take a look at the measure mode selection screen. The Radio Flash mode is the mode where the skyport feature will be active. Now on the home screen you will see you are in normal mode, channel 1 and Group All. Press the power control button to get the Flash control screen. Set your hair light, fill light and main light on different groups. Measure separately, or combine for a single reading. Select the Modeling Lamp Icon to enter the model light control screen. This works great if you want to dim or brighten the modeling lights as well. A meter is ideal for getting repeatable results, and giving you more control of your photography. And With the Sekonic L-478DR-U-EL, you have all the control you ever wanted, right in the palm of your hands.
#Metering #Lighting #Photograpjhy
As a professional photographer, your time is money. Even if you're not shooting to earn a client's money, why waste time shooting multiple exposures for every shot? In the latest Sekonic video, Joe Brady clearly and thoughtfully demonstrates why there's no need for HDR bracketing when you're using the Sekonic L-758DR meter.
#Photography #HDR #Exposure #Tips #Webinar
Just like when baking, there are some essential ingredients and tools you need to have to get consistent, efficient, and tasty results when creating portraits. Join landscape photographer and trainer Joe Brady as he shows us the recipe for this 'Devil's Food Cake' photo shoot.
#Webinar #Photography #Tutorial #Tips
Just like when baking, there are some essential ingredients and tools you need to have to get consistent, efficient, and tasty results when creating portraits. Join landscape photographer and trainer Joe Brady as he shows us the recipe for this 'Angel Food Cake' photo shoot.
#Photography #Webinar #Metering #Tutorial
Just like when baking, there are some essential ingredients and tools you need to have to get consistent, efficient, and tasty results when creating portraits. Join landscape photographer and trainer Joe Brady as he shows us the recipe for this 'No Bake Cheesecake' photo shoot.
#Photography #Portraits #Tutorial #Tips
Just like when baking, there are some essential ingredients and tools you need to have to get consistent, efficient, and tasty results when creating portraits. Join landscape photographer and trainer Joe Brady as he shows us the recipe for this 'Little Red Velvet' photo shoot.
#Photography #Tutorials #Metering #Portraits
Just like when baking, there are some essential ingredients and tools you need to have to get consistent, efficient, and tasty results when creating portraits. Join landscape photographer and trainer Joe Brady as he shows us the recipe for this 'Key Lime Pie' photo shoot.
#Photography #Tips #Portrait #Metering
Did you know the L-758 DigitalMaster Lightmeter has 3 custom settings that make it more efficient for Landscape Photography?
Joe Brady, noted landscape photographer and trainer, explains the advantages and shows you step-by-step how to adjust each.
#Landscape #Photography #Tutorial #Metering
This video will guide you through the basic steps of setting up the Litemaster Pro L-478 Series for Ambient Measurements
#Photography #Metering #Tutorial
Photographer Tony Corbell walks us through 10 completely different lighting scenarios using only 1 light-shaping tool.
#Photography #Tips #Metering
Sekonic L-478: bit.ly/2TjgEgB
Learn how adding two tools to your photo arsenal can save you tons of time and money. The Sekonic L-478 and X-Rite ColorChecker Passport will change your life for the better.
Some people believe that the color and exposure from their cameras is perfect. Or even good enough. We believe that is so far from true, that we’re willing to prove it. Join us for a free live video demonstrating how to combine a Sekonic L-478 and X-Rite ColorChecker Passport to nail exposure and color from the get-go.
Why should you care? Great question. Because you might not be aware of how much time you spend fixing photos during post-processing. Wouldn't you rather spend more time making them look like you want them to than fixing errors? Consider that...
Join Joe Brady as he shows tried-and-true methods to make your portrait sessions less about the tech, leaving more room to connect with your clients and make extraordinary photographs. He’ll cover available light, studio flash and more.
Be warned, once you watch this webinar, there is no going back to “not knowing” about how to do it better.
Equipment list:
Sekonic L-478
X-Rite ColorCheckerPassport
Sony a7r camera
Sony 70-200 f4 lens
PocketWizard Plus III
Sony HVL-F60
Flash Adobe Lightroom 5
#Photography #Metering #Portraits #Tips


