DIY Hand Sculpted ChickenVennas Nature2021-10-07 | I used Cemental Rapidset cement and plaster of Paris and white glue to create this fun chicken.
The plaster clay recipe is 1 cup plaster of Paris 1/4 cup white glue A few drops of water if needed.
Knead this into a smooth dough. Only make this much at a time as it hardens quickly.
Follow the directions in the video for mixing and use.
The cement and fabric (paper mache mix) This is cemental here in America other places you will use mortar mix
To the mortar mix add enough water to make the consistency of crepe batter.
I do not give amounts here as different mortar mixes use different amounts of water.
Let me know how it goes 😊Cement Gnome Home TutorialVennas Nature2025-03-10 | For this project I used
*Styrofoam sheets or even heavy cardboard. *Handiwipes or any cloth cut into strips *portland cement *Rapid set mortar mix or Cemental *interior / Exterior house *Any stones or tiles for embellishments
The cement clay I like is from my friend Linda. This one recipe made enough for my house but you can make more batches for your project.
1/3 cup Portland Cement 1/3 cup dry Thinset (I use Versabond ) 1/3 cup white glueLets talk about life and whats coming up😁Vennas Nature2025-02-25 | I will be making a video making the Gnome house. I'm starting today 2/25/25 Let's see if Little Guy let's me get it completed👍😁
Let me know how it goes.Snap Kitchen Towel TutorialVennas Nature2024-06-18 | ...DIY Craft Foam DollVennas Nature2024-01-07 | Hello all. I am no expert at this art form, however I am very excited to show you what I have learned.
I am in love with these dolls.
I am sorry for the length of the video. Two part videos tend to get separated and part 2s can be hard to find so I just glombed it all together.
Here is the original link I saw that inspired my work https://pin.it/67FTyjC
Amazon link for craft foam
MEARCOOH Beige Foam Sheets Crafts 9x12 Inch 2mm Eva Color Craft Foam Paper for Crafts Project Preschoolers Classroom Scrapbooking DIY Cosplay(10 Sheets) https://a.co/d/3gEX5Kd
Amazon link for socks
https://a.co/d/0uJrab4Hypertufa Gnome Flower PotVennas Nature2023-09-15 | ...Part 2 Yellow BirdVennas Nature2023-08-16 | Welcome and I hope you will find use of this video.
Let me know if you have questions I try to respond quickly.
Here are the supplies I used
Papercrete Recipe
1 c damp toilet paper pulp squeeze out most of the water
1/4 c white glue 1/2 c versabond thinset 1/2 cup portland cement
Mix together to the consistency you want thinner for spreading stiffer for modeling
Link for Craft Wire:
Mandala Crafts Anodized Aluminum Wire for Sculpting, Armature, Jewelry Making, Gem Metal Wrap, Garden, Colored and Soft, Assorted 6 Rolls (12 Gauge, Combo 1) https://a.co/d/eLAJUtj
Rapid Set Cemental
I get mine at Home Depot
Here is an Amazon Link
JE Tomes RSCA-25 Rapid Set Concrete Repair, 25 lb. Box https://a.co/d/f9P9Nh5
Acrylic paints I use Deco Art outdoor paints as well as Folkart paint even Behr outdoor house paint sample size from Home DepotDIY Yellow Bird Sculpture pt1Vennas Nature2023-07-10 | Papercrete Recipe
1 c damp toilet paper pulp squeeze out most of the water
1/4 c white glue 1/2 c versabond thinset 1/2 cup portland cement
Mix together to the consistency you want thinner for spreading stiffer for modeling
Link for Craft Wire:
Mandala Crafts Anodized Aluminum Wire for Sculpting, Armature, Jewelry Making, Gem MetalCreative Garden Art & Craft Sale 22Vennas Nature2022-11-14 | I hosted this Art and Craft Sale. Some artisans are friends and family some I met through all of my social media and invited them to join the experience.
There were 19 of us two dropped off at the last minute so there would have been 2 more.
I provided free booth space and advertising and pulled pork sandwiches, veggies, chips and fruit for lunch.
This was my second time hosting and the Artist said they would like to come again😁
It was a good dayPainting TutorialVennas Nature2022-11-11 | I apologize for the length of this video. This painting job took about 2 1/2 Hours in real time.
I hope it is helpful to you all. Carol thank you for asking for this tutorial.
Here is the link to the Gnome House Tutorial Gnome House Tutorial
My papercrete clay 1 c damp toilet paper pulp squeeze out most of the water
1/4 c white glue 1/2 c versabond thinset 1/2 cup portland cement
Mix together to the consistency you want thinner for spreading stiffer for modelingAdjustable Leather and Turquoise BraceletVennas Nature2022-10-16 | ...DIY Cement SnowmanVennas Nature2022-10-08 | For this project I used
Rapid set mortar mix handiwipes Cemental
and you can use either or both of the cement clays I like
My papercrete clay 1 c damp toilet paper pulp squeeze out most of the water
1/4 c white glue 1/2 c versabond thinset 1/2 cup portland cement
Mix together to the consistency you want thinner for spreading stiffer for modeling
The cement clay I like is this same recipe minus the paper pulp.
And private message me if you 👍 I am always looking for cement or hypertufa artist in my area of Mesa AZDIY Cement Melted Snowman OrnamentVennas Nature2022-10-07 | This project uses Rapid Set Cemental Plaster of Paris PVA (white glue) water acrylic paints
The plaster clay is made with equal parts plaster of Paris and white glue mixed together. knead in more plaster to get the consistency you want.
The mix for the Snowman is 1 cup cemental and about 1/4 cup water. You want a stiff but plyable cement in a clay consistency.
This project was fun to create and figure out.
Let me know how it goes for you😊DIY Hypertufa and Cement Garden Plant MarkersVennas Nature2022-09-02 | I hope you find this video useful. Letter Stamp Links Walmart
In this video I will demonstrate how to make a Hypertufa Riverrock
I will demonstrate how to create a votive candle holder out of the river rock.
I will demonstrate how to color hypertufa.
Thank you for viewing and I hope this video is useful.
My recipe I am using is
1 c vermiculite ( get this where you buy your pearlite) 1 c pearlite 1 c fine sand 1 c sifted peatmoss 2 c portland cement water to bindDIY Hypertufa MoonfaceVennas Nature2022-07-31 | In this recipe I used 3 parts finely sifted peatmoss 2 parts pulverized perlite 1 part sifted sand (fine sand) 3 parts portland cement. (in the video I said 2 parts but I used 3 parts.
Water to bind add a little at a time.
Let me know your thoughts😊DIY Hypertufa Bird BathVennas Nature2022-07-19 | I used equal parts perlite, vermiculite, sand and 2 parts portland cement 1 1/2 parts water.
I seal this with polycrylic, let that dry then 2 coats of Rustoleum crystal clear spray paint.
I was inspired by art I saw on Craftedgardentreasures on Instagram.
I hope you will be inspired to create and have confidence in yourself. You see none of us get it right all of the time.
Just have fun😊DIY Cement TilesVennas Nature2022-04-09 | This project uses Rapid set Cemental
Let me know if you tried it😊
Here are links to find the letter stamps compliments from a viewer. Thank you Gracie
I found out later the impact on some of my vendors and new friends was life changing...
You never know how simple acts you do to fill your dreams can have positive impacts on others.
Follow the prompting of your heart😊DIY Cement Moon FaceVennas Nature2022-03-07 | This project uses Rapidset Cemental and the papercrete recipe.
Let me know how it goes😊DIY Cement Gnome HouseVennas Nature2022-03-06 | Clay Recipe 1/3c portland cement 1/3 c Thinset Tile adhesive 1/3 c white glue
Knead with more portland cement if you want a stiffer clay.
Have a great timeDIY Cement GnomesVennas Nature2022-03-06 | New Clay Recipe 1/3c portland cement 1/3 c Thinset Tile adhesive 1/3 c white glue
Knead with more portland cement if you want a stiffer clay.
Have a great time😁DIY Found Object RobotVennas Nature2022-01-23 | I am happy to be back with you.
I hope you will enjoy making this project. I go to the hardware store to get my nuts and bolts. At times I also use my rivet gun. That's always fun. Sometimes in tougher metal I use an electric drill.
Let me know your thoughts😁
Thank you for viewingDIY Cement BunnyVennas Nature2021-11-27 | Cement mix for bunny
1 part portland cement 2 parts perlite 1 part sand 1 part water add more of needed
Thank you for viewing. Please let me know if you have questions or ideas for me😊DIY Cement Santa LuminaryVennas Nature2021-11-14 | Rapid Set Cemental and PapercretePapercrete Gnome HouseVennas Nature2021-11-12 | ...DIY Girl GnomeVennas Nature2021-10-28 | DIY Girl Gnome
Papercrete
1 c damp paper pulp. squeeze out water just enough for the paper to hold together add 1/4 c white glue 1/2 versabond thinset mortar 1/2 portland cement
Mix together if it's too wet add more portland cement if it's too dry add a little water.
The body is made of Rapid Set CementalHand sculpted Girl GnomeVennas Nature2021-10-18 | I was asked if I could make a little girl gnome. Here she is.
This is my first time making this model...I foresee many more coming.
She is 4 1/2 inches tall sitting. Her legs are poseable.DIY Cement Fairy Garden StoneVennas Nature2021-09-10 | I use Rapid Set Cemental about 3 pounds for this project
Have your fairies out of their molds Have your wire mesh cut Have your letters organized
You will need to stay with this project. Watch the Cemental closely. When the Cemental gets to just the right stiffness to add the fairies, texture and letters it will set very fast.
I have made 4 of these stones and only 2 came out perfect...lol
Wash the pine cones in a sink full of warm water with 1/2 cup to 1 cup of vinegar. Let them soak for 20 to 30 minutes. ...
Preheat your oven to 200 to 250°F. Place the pine cones on a baking sheet lined with parchment paper. Spread them out so they have room to open. Let them bake for at least 30 minutes up to an hour.
Cemental clay for one Gnome
5 squares toilet paper 1/4 c Elmer's glue all 1/4 tsp dish soap mix until tissue turns to fibers add and stir 1/2 c cemental Turn out on plastic covered table and knead in portland cement or Cemental until you have the consistency you want. I used Cemental here.
soft for spreading more firm for molding details
This clay dries quickly this is why I only mix up enough for one gnome at a time.
Hot glue foil hat to pinecone cover foil with clay Add clay nose
use a length of jute or hemp twine tie knots at each end. Mold the boots over the knots. Add as much detail as you like.
set the twine in and around the spaces in the pinecone to make the legsDIY Pinecone and Cement GnomesVennas Nature2021-08-23 | ...DIY Cement Turtle #cementart #turtles #diyVennas Nature2021-08-16 | The clay recipe I used to make the head, feet and under shell is this.
1/4 c. Elmer's Glue All 5 squares of toilet paper 1/2 teaspoon dish soap 1 Tablespoon joint compound (not Dapp) I used Proform from Wal-mart Mix all this together until toilet paper is disintegrated add 1/4 cup portland cement 1/4 cup powdered thinset /tile adhesive I used Mapei ultraflex
Use oil on your hands and knead together until the clay comes together.
I used Rapid Set Cemental a silicone cake mold for the turtle shell.
aluminum foil and wire for the armature. Cement and paper clay for the head and legs.
I use Rapid set cementalFrog Prince FountainVennas Nature2021-07-31 | ...DIY Amazing Cement Clay😊 #cementclay #papermache #papercrete #gnomehouseVennas Nature2021-07-25 | Inspired by Johnnie from Ultimate papermache.com on YouTube.
Here are my ingredients in the clay
15 squares toilet paper 3Tblsp. white vinegar 1/2 c Elmer's Glue All 1/4 joint compound (not Dap brand) 1/2 c all purpose white flour 1/2 c portland cement
mix vinegar, tissue and glue until tissue is completely disolved. stir in joint compound. Add flour and cement stir then knead. Add more flour and cement as needed to make a soft but not sticky clay.
Keep the clay in a baggie as you work on your project.AMAZING Cement Clay The Trailer😊Vennas Nature2021-07-21 | This is the trailer for the DIY tutorial and recipeDIY Hypertufa / Cement Pumpkins😊 #hypertufa #holidaydecor #pumpkinsVennas Nature2021-07-17 | How to make Pumpkins with Hypertufa
supplies fastest mortar repair mix vermiculite sifted sphagnum peatmoss cement color if desired stick for pumpkin stem wire for tendrils stocking for mold rubber bands for moldDIY Biodegradable Seed Started Pots Super Cute😊Vennas Nature2021-07-17 | ...Gnome EnvironmentVennas Nature2021-07-12 | ...DIY Poppy Accents for Concrete Yard ArtVennas Nature2021-07-06 | Making poppies from pony beadsWhat to do about spilling paint on your shirt 😊Vennas Nature2021-07-06 | ...Free Art Supplies from Craigs ListVennas Nature2021-06-22 | ...DIY Cement Necklace #cementart #jeweleryVennas Nature2021-06-22 | I created this cement necklace out of left over Rapid Set Cemental
Maybe you will try itResponse to a question and DIY Frog FountainVennas Nature2021-06-21 | ...Art Cement Tips and Response to QuestionsVennas Nature2021-06-15 | ...DIY Papercrete Toadstool/mushroom #papercrete #toadstools #cementartVennas Nature2021-06-13 | ...Air Plants in My ArtVennas Nature2021-06-02 | ...