Make Cambered Cauls with a Thumbtack Lets Make Things 2023-09-06 | A cambered caul is a clamping aid used to clamp across wide surfaces you couldn't normally reach with clamps. The idea is definitely not a new one and has been around for hundreds, if not thousands of years. But they're very difficult to make as you really want a nice shape that will apply even pressure along an entire surface. There are some that swear by the jointer method of creating cauls, but in this video I show how it's not nearly as effective as using a simple thumbtack.Check out my Quad Screw Vise video (talked about in this video) → youtu.be/VdQLdu0gz_wBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.#MTbitesize00:00 Intro00:38 1. More about cambered caul03:22 2. Thumbtack cauls07:41 3. Testing for cambering09:33 4. Credits
Ratcheting Band Clamp Hack (Better & Cheaper Than Store-Bought!) Lets Make Things 2025-09-20 | Band clamps are great—but they’re also expensive and kind of overrated. When I needed one to glue up a set of miter joints, I almost bought another $20 clamp… until I looked over at a ratchet strap I already had.In this video, I’ll show you how to turn a basic ratchet strap into a full-on ratcheting band clamp—with no glue, no tools, and no sewing. We’ll even take a look at those little plastic corner pieces most of them come with—and why I think they’re more trouble than they’re worth.If you’ve got a strap and a miter to clamp, this hack might just save you a trip to the store.Thanks to my patrons for supporting both channels. Let me know how you clamp your miters in the comments—and as always, remember to keep making things.Become a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.Marc B.Richard B.Ben. KLet's Make Things#Let'sMakeThings #mtbitesize
Burn Wire Tool for the Lathe (Made with a Guitar String and $5) Lets Make Things 2025-07-25 | Why spend $50 on a lathe burn wire tool when you can make one for next to nothing?In this video, you and I are building a burn wire from scratch—complete with turned handles, threaded inserts, and a high-carbon steel guitar string that leaves crisp, black lines on your turning. I’ll walk you through the build, show how to use it safely, and explain what to avoid so you don’t get burned—literally.This tool takes about 15 minutes to make and delivers bold contrast lines that look amazing on spindles, knobs, handles, and more. We’ll even talk about string choice (spoiler: don’t use the wound ones), wire tension, and what happens when you forget to pull it out before you let go.Wires:#9 wire (ultra thin) 6 pack → amzn.to/44Luxt7#16 wire (medium) 6 pack → amzn.to/4kYqNcB#24p wire (thick) 5 pack → reverb.com/item/50572863-ernie-ball-plain-steel-024-6-pack#24p wire (thick) 1 pack (only if you can't get it from reverb) → amzn.to/3H08e9U"Playlist of bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9FmYR53HIhBcbVzYN8hLXQhHAs an amazon associate I earn from qualifying purchases.Become a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.Marc B.Richard B.Make Things00:00 Intro00:24 1. Materials01:27 2. Marking the handles02:59 3. Adding threaded inserts & assembly03:25 4. Wire/Strings04:44 5. Operation/Safety06:18 Credits#letsmakethings #lathe
Turn Your Router Table Into a Mini Jointer Lets Make Things 2025-06-30 | If you've built a compact router table and need a fence that does more than just sit there, this project might be exactly what you’re looking for.In this video, I’m making a simple, reversible router fence designed for a small bench-mounted router table. On one side, it's a straightforward fixed fence—easy to make, easy to use. But flip it over, and you get a precision edge jointer for cleaning up small stock—without ever touching your full-size jointer.Why build a router fence like this?A router table without a fence limits what you can do. Whether you’re cutting dados, trimming edges, or using a chamfer or roundover bit, the fence gives you a reliable reference surface to control the cut and improve safety. This version pivots from one side so you can dial in your cut, lock it with a knob, and reinforce it with an F-clamp. It’s adjustable, solid, and compact enough to hang on the wall next to the table.Why use a router instead of a jointer for small pieces?Jointers are incredible machines—but they come with a serious downside when it comes to smaller stock. The large cutterhead can easily grab and throw short or narrow pieces. That’s where this setup shines. With a flush trim bit and a small shim on the outfeed side, your router table becomes a safe, controlled mini jointer. It’s perfect for squaring up small exotic blanks, edge jointing short strips, or fine-tuning pieces that are just too risky for larger machines.Tools, materials, and project plans are on my website if you want to make one yourself (check back in a couple days for it).Become a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.Marc B.Make Things00:00 Intro00:30 1. Two fences00:50 2. Groove lock & insert02:53 3. Lock studded knob04:49 4. Notching prep06:56 5. Fence glue up08:22 6. Jointer fence build11:44 7. Jointer using and troubleshooting13:17 8. Credits#MakeThings
Better Sanding Block Build — and a Tote to Match Lets Make Things 2025-06-03 | I made this sanding block over a year ago as a quick Bitesize build — and I’ve used it on so many projects since. The trick? It uses a belt sleeve instead of sandpaper sheets, which means it lasts longer, sands smoother, and doesn’t tear up halfway through the job.In this video, I’m slowing things down to show the full build. This dowel-tensioned sanding block with curved ends is simple to make, and I’ll also walk you through a handy ejection jig. You can use the block by hand or chuck it in a vise — and because it rotates, you actually use the entire belt before tossing it, unlike most sanding blocks where half the grit goes to waste.Stick around and we’ll build a tote to go with it. The handle doubles as a dowel ejector — tap the sides, and it pops the belt loose. It’s fast, reliable, and just works.If you’re tired of wasting sandpaper, this might be your next favorite shop-made tool.Set of belts that I used → amzn.to/4koI3rYAs an amazon associate I earn from qualifying purchases.*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.
Batching Custom Knobs: When One Just Isn’t Enough Lets Make Things 2025-05-23 | A few days ago, I posted my Field Guide to Making Knobs, where I walked through three hardware methods: square nuts, threaded wood inserts, and T-nuts.That video gave a quick overview of each method, with pros and cons to help you choose the right one.But in this video, I’m slowing down and going deeper—focusing on how to batch out custom knobs using the threaded wood insert (TWI) method.I needed to replace a few knobs I stole from my router jig… and ended up making a whole set.This method is fast, easy, and surprisingly satisfying—especially when you’re using nothing but scrap wood, a handful of TWI's and a Post-it note.You’ll see how I batch out 7 custom knobs in just about 7 minutes (with no jigs, no templates, and no stress).If you liked the first video but wanted a more practical, production-minded follow-up—this is it.Want to see all three knob styles and when to use them?Watch the Field Guide to Making Knobs here → youtu.be/3RBaA-BDfykThreaded inserts I found (and love) on Amazon ↓(5/16”) Threaded wood inserts (41 Count) → amzn.to/4mtQF1X(1/4”) Threaded wood inserts (60 Count) → amzn.to/43uNkHdAs an amazon associate I earn from qualifying purchases.218. Sanding with PVC (Tip) → youtu.be/nz1c2MzNAUIBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.Make Things00:00 Intro00:28 1. Materials and Mapping02:26 2. Drilling and TWI'ing03:38 3. Shaping and Sanding04:42 4. Adding a Neck06:42 5. Credits#LetsMakeThings
Field Guide to Making Custom Knobs (3 Hardware Methods) Lets Make Things 2025-05-19 | If you’ve ever paid too much for a plastic knob that barely holds… this video is for you.In this DIY field guide, I’ll walk you through three proven hardware methods to make your own custom knobs—using square nuts, threaded wood inserts, and T-nuts. These aren’t just budget-friendly—they’re mechanically solid. One of them is even stronger than any store-bought knob you’ll find.This video focuses on the mechanics behind each method—how they work, how to install them properly, and which one is best for your project.If you want reliable fasteners and a deep understanding of what holds (and what fails), you’re in the right place.Whether you're building jigs, fixtures, vises, or just want a handle that actually works, this guide walks through each method with pros, cons, and setup tips.I’ll break down:The mechanical strengths and weaknesses of each fastenerWhich method works best for torque, speed, or batch buildingTips for centering, fit, and optional upgrades to improve pressure distributionDon’t pay for flimsy knobs—make your own, and make them better.Become a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.Make Things00:00 Intro00:20 1. Square nut04:42 2. Threaded wood insert08:36 3. T-nut10:59 4. Knob neck/shaft11:51 5. Credits#MakeThings #mtbitesize
The Yardstick Upgrade You Didn’t Know You Needed Lets Make Things 2025-05-04 | If you’ve ever struggled to make accurate marks with a yardstick—especially one with dual scales—you’re not alone. In this video, I take a simple yardstick and turn it into a fully functional layout system, complete with a saddle arm for square, repeatable measurements and a hook stop that transforms it into a reliable T-square.This isn’t about over-complicating a ruler. It’s about removing the guesswork from layout work and creating something you can trust—every single time.Whether you use metric, imperial, or both, this build makes marking clean and easy."Playlist of all bitesize tips used" → coming soon!Become a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.Make Things#MakeThings #mtbitesize
More Reach. More Control. Make a Router Sled // Router Base Onion Build III Lets Make Things 2025-04-11 | Need more reach and control from your router? In this video, I’ll show you how to build a simple, powerful router sled that expands your router’s surface area—unlocking new possibilities for cutting lap joints, flattening slabs, and improving accuracy on large workpieces.This is the third project in my Router Base Onion Build series, where each project builds off a shared plexiglass baseplate. If you’ve already seen the dog hole router table and the router anchor jig, this sled is your next layer. It’s designed to drop onto the same plate and provide rock-solid control for big cuts.You’ll see how I made the base, flush-mounted the plate, added top braces, and even reinforced it with rails to ride on Unistrut—turning it into a full slab-flattening jig without the back pain.Check the description below for links to the full plans, other jigs in the series, and related videos on my second channel.Want to get more out of your router? This sled is where it starts.Router Dog Hole (Onion Build I) → youtu.be/MS7Q9RcaNmwRouter Anchor (Onion Build II) → youtu.be/7rKplbO8Tdg"Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9FnOMpS-AbRp__DVsylzSnSiMaterials Tools/Step by Step Instructions → makethingswithrob.com/make-a-router-sledBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.Make Things00:00 Intro00:28 1. Materials01:19 2. Mappings02:02 3. Shaping05:42 4. Attachment holes08:11 5. Lap joint braces10:45 6. Handle hole placement11:15 7. Glue up12:37 8. Example13:15 9. Beyond15:27 10. Credits#LetsMakeThings #router
Poor Mans Clamp Stretchers // Full QUICK! Build Lets Make Things 2025-03-24 | Need a longer clamp but don’t want to spend a fortune on pipe or bar clamps? In this video, I show you how to extend your clamp reach using a scrap of plywood and two clamps you already own. This DIY clamp extender is simple, cheap, and surprisingly strong—strong enough to bend a full sheet of plywood using nothing but a piece of particle board.I’ll walk you through the setup, the materials, and even where this trick can fail if you’re not careful. If you’ve got a glue-up that’s too long for your clamps, this could be the fix that saves your project and your budget.This is part of my ongoing series focused on shop-built solutions, woodworking on a budget, and making things work with what you’ve got. Whether you're a beginner or an experienced builder, this clamp extender trick is worth adding to your bag.If you like practical woodworking hacks that actually work, sub and follow for more.Become a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.Make Things00:00 Intro00:54 1. Materials & overview02:05 2. Mapping02:50 3. Drilling03:26 4. Making D's04:35 5. Testing it05:19 Credits
A Router Anchor That Ends the Balancing Act // Router Base Onion Build II Lets Make Things 2025-03-08 | Routers are powerful tools, but when used along the edge of stock, balancing becomes a challenge. Since most of the router's weight hangs off the edge, there's a constant risk of tipping, shifting, or uneven cuts. Enter the Router Anchor. This idea gives you more stability, control, and leverage while routing.Designed to stabilize your router on edge work, this shifts the center of gravity onto the stock, preventing bumps and ensuring smooth, controlled passes.If you're using a trim router, instead of spending $25 or more on a store-bought baseplate, we'll make a custom built pad that cost a fraction of the price while having the ability to fit any trim router setup. Whether you're using a full-sized router or a lightweight trim router, these fixtures will eliminate the balancing act and give you more control with your cuts."Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9Fl5jsj4RYaeX3M4FyNqlMpDAttaching plexiglass to the base → youtu.be/MS7Q9RcaNmw?t=492Step by step instructions/tools/materials → makethingswithrob.com/router-anchorBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianAubrey G.NukebertSam W.Aaron Knows DIYG. SalazarDavid B.Make Things, Let's Make Things00:00 Intro00:22 1. ROUTER ANCHOR00:25 1.1. Materials00:49 1.2. Mapping out lines02:14 1.3. Recessing the plywood03:13 1.4. Shaping the base04:03 1.5. Base to baseplate05:53 1.6. Dowel handle06:14 1.7. Testing it out06:52 1.8. Final thoughts07:16 2. TRIM STYLE ROUTER PLATE07:27 2.1. Differences and materials08:54 2.2. Mapping the shape09:59 2.3. Cutting and shaping10:32 2.4. Final markings, drillings13:17 2.5. Assembly & example14:13 CREDITS#LetsMakeThings
The Best Glue & Finish Storage System // Full Onion Build Lets Make Things 2025-02-16 | Tired of losing your glues, finishes, and stains in a cluttered shop? Cold temps ruining your adhesives? This compact, wall-mounted glue & finish cabinet is the perfect solution!This clam-style storage cabinet folds open to double your storage without taking up extra wall space. Inspired by Steve Ramsey’s design, I’ve added a hidden front tool door to store brushes, tape, and other finishing tools. And when the temperature drops, you can unhook it from the French cleat and bring it inside—protecting your materials from cold damage.This project is part of an Onion Project, meaning you can build just the base cabinet or add more features depending on what you need. In this full build, I’ll walk you through the entire process step by step.Why would you want to build this?* Saves space – Compact, wall-mounted design* Keeps glues & finishes organized – No more lost bottles or messy shelves* Protects from cold temps – Portable design lets you bring everything inside* Expandable & modular – Add a hidden front tool storage door for extra organizationIf you’re tired of digging through a mess every time you need glue or finish, this storage cabinet will fix that problem for good.Would you add anything to this build? Drop your thoughts in the comments!Want more woodworking projects? Subscribe for more!"Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9FndYWgdRyqgsyX5NMr3ZHFDFull step by step/tools/materials used → makethingswithrob.com/glue-and-finish-clam-cabinetCheck out my other channel! → @makethingsBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianLes N.Aubrey G.NukebertSam W.Aaron Knows DIYG. SalazarMake Things#MakeThings #mtbitesize 00:00 Introduction00:31 1. Materials01:00 1.2. Making boxes04:09 1.3. Adding hinges05:16 1.4. Weight ramp09:02 2. Materials09:18 2-2. Door frame10:30 2.3. Lots of hinges12:48 2.4. Shadow boxing16:52 2.5. Thermometer18:14 3. Materials19:07 3.2. Base improvement20:13 3.3. Dowel handle23:00 3.4. French cleat24:40 Credits
You’re Cutting Dowels Wrong – This Fixes That Lets Make Things 2025-02-01 | Cutting dowels by hand can be frustrating, slow, and inconsistent—but this simple jig changes everything! With a V-groove design and a flush cut saw with no set teeth, this jig makes fast, repeatable, and dead-on accurate cuts without the hassle.No more eyeballing. No more uneven dowels. Just precise cuts, every time.In this video, I’ll show you:* How this jig keeps cuts straight and consistent* The rare flush cut saw that makes it all possibleGet the no-set flush cut saw here: amzn.to/4d6TEI1If you’ve ever struggled with cutting dowels accurately, this bench appliance is the simple fix you need. Let me know what you think in the comments—would you use this in your shop?Become a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianLes N.Aubrey G.NukebertSam W.Aaron Knows DIYG. SalazarMake Things00:00 Intro00:36 1. Materials01:04 2. Just 2 cuts and glue02:12 3. Markings02:58 4. Blade kerfs03:41 5. Hardboard toe04:41 6. No set teeth blades05:54 7. Example06:57 8. Credits
Router Dog-Hole Table // Router Base Onion Build I Lets Make Things 2025-01-16 | Working with small stock on a router can be a challenge without a proper router table, but not everyone has the space—or budget—for a full-size setup. In this video, I’ll show you how to build a simple, space-saving benchtop router table that’s perfect for small shops and tight budgets.This DIY router table uses just a single bolt, a piece of plywood, and a couple of supports to create a sturdy, reliable platform for your router. I’ll walk you through cutting the plywood, creating a custom router base plate from plexiglass, and setting up the supports to keep everything secure.Whether you’re new to woodworking or a seasoned pro, this project is an easy, affordable way to expand your router’s capabilities and make working with smaller stock safer and more precise. Plus, this compact design is customizable, so you can tweak it to fit your needs.If you’re looking for a straightforward router table solution that won’t take up space or drain your wallet, this is the build for you. Don’t forget to like, comment, and subscribe for more woodworking tips, tricks, and project ideas.Check out a couple new layers! → youtu.be/7rKplbO8TdgStep by step/materials/tools website (all free) → makethingswithrob.com/router-dog-hole-table"Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9FnXBdMmeyCFSiRZ3AMTjEKqBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianLes N.Aubrey G.NukebertSam W.Aaron Knows DIYG. SalazarMake Things#MakeThings #mtbitesize00:00 Intro00:25 1. Materials01:10 2. Base (profile)03:42 3. Adding a dog hole05:32 4. Base (dog hole)06:31 5. Base supports08:12 6. Plexiglass10:52 7. Base (rabbeting)11:49 8. Operation12:40 Credits
Quick & Simple Circular Saw Cut-Off Jig // Full Step by Step Build Lets Make Things 2024-12-31 | Starting out in woodworking doesn’t mean you need expensive tools. While big, costly tools can make things easier, not having them doesn’t make the job impossible. When I first began, I bought a lot of pre-cut stock. The hardest part was getting a straight, accurate 90˚ cut on the edges.This jig is a game-changer, especially if you’re using a budget-friendly circular saw (some as low as $30). To be honest, even with all the tools I have now, I’m looking forward to using this jig to break down my materials into more manageable pieces. Simply put, this is one of the squarest cutting DIY jigs I think I've ever made, and if you don't have a big budge, this cut off jig and a circular saw will get you far.Step by step build → makethingswithrob.com/circular-saw-cut-off-jig"Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9FnBWQ2CLpzjjBvzoVKa9__jBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianLes N.Aubrey G.NukebertSam W.Aaron Knows DIYLet's Make Things00:00 Intro00:33 1. Materials00:56 2. Hardboard to size02:27 3. Stock hook03:47 4. Cut fence05:06 5. Using Uni-strut (NOT necessary)05:22 6. Squaring up the sides06:21 7. Operation08:29 8. Credits#Letsmakethings
Build the Ultimate Tenoning Jig // The Full Onion Build Lets Make Things 2024-12-12 | If you're really looking to take your woodworking to the next level, especially with joints, you'll appreciate this. This tenoning jig is the ultimate addition to _my_ workshop, giving me precise, flawless cuts every time...and I know it can do the same for you—all with tools you probably already have.This video is what I call an onion project—a multi-layered build designed to suit all levels of woodworking skill. In the first half, I’ll show you how to create a fully functional tenoning jig that’s simple to make and ready to use right away. In the second half, we’ll peel back the layers and add advanced features to fine-tune the jig for ultimate precision. The other layers aren't critical and can be added any time in the future, so be sure to save this video.The only large power tool you’ll need for this build is a table saw. If you’ve got a table saw, chances are you already have the smaller tools like a hand drill, to make this DIY project. I've done everything I can to make this as simple and as easy as possible, fully utilizing the table saw so that you don't need to invest in a lot of expensive tools.By the end, I'm confident that you’ll have an extremely versatile, precision tool for your shop—perfect for making flawless tenons and improving your joinery workflow."Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9Fmt2K0LoVh-KMqOmy3CgXaLStep by step / Materials & Tools used website (all free) → makethingswithrob.com/make-a-table-saw-tenon-jigBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianLes N.Aubrey G.NukebertSam W.Aaron Knows DIYMake Things00:00 Intro00:42 1. MAIN BUILD01:31 1.2 Cutting grooves02:20 1.3 Cutting base, carriage, fence03:21 1.4 Adding t-track, dowels, t-bolt05:12 1.5 Miter slot attachment08:19 1.5B (Alt) Miter slot attachment10:32 1.6 Fence work12:41 1.7 Fence on the fence (stop block)12:55 1.7B Slidable fence (optional)14:56 1.8 Finishing the body17:04 1.9 Epoxy the channels18:19 2. STOP SYSTEM18:39 2.2 Stop control (sliders)20:27 2.3 Pointer build / install22:05 2.4 Slider install22:52 2.5 Ruler/safety install24:10 3. HANDLE BUILD24:42 3.2 Cutting centers25:18 3.3 Shaping and gluing handles26:55 3.4 Handle base28:01 4. STOCK CLAMP28:17 4.2 U-bolt and inserts29:26 4.3 Clamp bar30:05 1-4 DEMONSTRATION#MakeThings #tenonjig
Miter Clamping Jig Aid (Picture Frame Edition) // Full Commentary Instructional Lets Make Things 2024-11-07 | In this video, I’ll show you how to make a simple yet highly effective clamping aid for picture frames and small mitered projects. Inspired by an old woodworking book, I originally came across a technique using notched boards to hold mitered frames together. While it worked well, it had a limitation—you’d need to cut new boards every time you changed frame sizes. So, I decided to come up with a more flexible, adjustable version that lets you use the same jig for any frame size.This DIY clamping aid is built from a few pieces of plywood, a groove with t-track, and a couple of blocks to keep everything locked in place. It securely clamps each corner with only two clamps, holding the angles just right for a clean, tight fit every time. It’s a quick project, but it’s now my go-to solution for clamping frames without needing any expensive corner clamps. Perfect for anyone looking to save money and make use of scrap wood.If you interested in making picture frames with mitered corners, this clamping aid is what you want. It allows you to squeeze the joint together...something miter clamps aren't always good at doing as they're, more or less, built to hold a joint in place.Follow along to see how it’s done, and add this practical tool to your woodworking setup!Step by step/Materials/Tools used website → makethingswithrob.com/picture-frame-clamping-aidBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.Aaron Knows DIYDoug F.00:00 Intro01:00 1. Materials01:25 2. Plywood tracks02:10 3. Locking blocks03:16 4. Homemade t-tracks03:49 5. Static blocks04:16 6. Moveable blocks & wax04:45 7. Demonstration06:00 Credits
Unreal Wood Bending...with a Muffler // Step by step build Lets Make Things 2024-10-31 | The hot pipe bending method is a time-honored technique rooted in the art of luthiery, where instrument makers use heated pipes to bend thin strips of wood for guitar sides, violin ribs, and other precisely curved elements. This process, which has been essential to fine woodworking for centuries, allows for controlled, elegant bends without the need for complex steam boxes. By simply heating a metal pipe and applying moisture to the wood, the fibers soften and become pliable, making it possible to shape wood into tighter, customized curves with minimal equipment.In this project, we’ll explore the hot pipe method from a practical perspective, taking cues from luthiers who value precision, efficiency, and artistry. Using a propane torch and a well-positioned stainless steel pipe, we’ll achieve smooth bends that hold their shape. Whether you’re a woodworker looking to add graceful curves to your projects or simply curious about traditional bending techniques, this guide will walk you through the essentials of hot pipe bending—right from the basics to some pro tips for getting reliable, repeatable results.Full plans → makethingswithrob.com/bending-wood-with-pipesBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.Aaron Knows DIYDoug F.00:00 Intro00:10 1. Materials02:01 2. Structure supports05:15 3. Pipe work06:23 4. Final assembly07:35 5. Preparation for the bend10:27 6. The bends13:51 Credits (thank you patrons!)
Build a Simple, Versatile Router Fence // Step by step instructions Lets Make Things 2024-10-18 | In this video, I’ll walk you through every step to building a simple yet powerful router fence using plywood, t-tracks, and a dust port. Even if you're new to woodworking or...you're a seasoned pro, this fence will transform your router into a powerhouse. Watch along, and by the end, you’ll be ready to build your own router fence for flawless, clean cuts every time.Step by Step/Tools Needed & Used/Materials → makethingswithrob.com/make-a-router-fence-for-your-table-sawPlaylist of all bitesize tips used → youtube.com/playlist?list=PLEBXNh1Ik9FmqKenaMWOnIWnAGQQOsJXyBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.Aaron Knows DIYDoug F.00:00 Intro00:29 1. Materials01:00 2. Building the base (dados)02:48 3. Building the bas (walls)05:50 4. Building the base (dust port)08:25 5. Building the base (glue up)08:48 6. Fence (to size and grooves)11:04 7. Fence (t-track)12:00 8. Fence (to size & assembly)12:36 9. Attaching the t-track13:39 10. Basic operation15:36 11a. Extras - Stop block/featherboard17:18 11b. Extras - Profile fence18:49 Credits
Router Dado Track // Step by step instructions Lets Make Things 2024-09-26 | Creating perfectly straight dados is essential for tight-fitting joints, but getting that precision with just a straight edge can be tricky. In this video, I’ll show you how to make a jig using uni-strut, bearings, and hardboard, which takes the guesswork out of lining up a straight edge. This method is simple, cost-free, and ensures your dados are dead-on every time. It doesn't matter if you're new to woodworking or just looking for a reliable technique, this jig makes dado cutting quick, clean, and effortless.Website (Materials/Tools used/Step by Step) → makethingswithrob.com/router-dado-trackPlaylist of all bitesize tips used → youtube.com/playlist?list=PLEBXNh1Ik9FmbHHAm5cdHzyZOF_eR_ZdWBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.Aaron Knows DIYDoug F.00:00 Intro00:38 1. Materials01:01 2. Carriage base01:24 3. Upper carriage arm (shape)02:16 4. Plexiglass base05:50 5. Carriage arm06:26 6. Finalizing the carriage base09:00 7. Finalizing the rail11:22 8. Centering jig12:24 9. Demonstration14:50 Credits
Homemade Honing Compound for Glass...and More! // Step by step instructional Lets Make Things 2024-09-11 | After countless hours of testing, I’ve perfected my own honing compound and sandpaper jig setup that will give you the edge you’ve been searching for—literally. I’ve spent time finding the ideal abrasives and fluid for my honing compound, ensuring it’s not just effective but something you can easily replicate. The best part? I’m offering this compound formula for free, so you don’t have to worry about costly honing pastes. In this video, I’ll walk you through my process and show you how to get a professional-quality edge without breaking the bank. Whether you're honing plane blades, chisels, or anything in between, this method will fit right into your shop.Thin mineral oil → amzn.to/3MFDNFiBefore we make things → youtu.be/OpF2J90xawMStep by step / materials / tools → makethingswithrob.com/compound-and-paper-cutter-jigFull demonstration → youtu.be/fSdpAAMD8awSharpening Jig video → youtu.be/520NBebosggAs an amazon associate I earn from qualifying purchases.Become a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.Aaron Knows DIYDoug F.00:00 Intro00:57 1.1 Materials01:40 1.2 Mixing03:07 1.3 Glass vs ceramic03:56 1.4 Method05:52 2.1 Materials06:11 2.2 Quick build / marking07:10 2.3 Cutting process08:18 Credits
Simple End Grain Table Saw Sled with the 2 Cut & 5 Cut Method Lets Make Things 2024-08-29 | A sled is essential for ensuring accuracy and safety, giving you a stable platform to make consistent and clean cuts. In this step-by-step tutorial, I’ll show you how to build what I believe is the easiest and best table saw sled. I'll also demonstrate the two step and five step method to making sure you get the most precise 90˚ angle with your fence and the blade.Unlock precision in your woodworking with a table saw sled that transforms your cuts into works of art!Keep making things!Tools used / Materials / Step by step (free!) → makethingswithrob.com/simple-table-saw-sledWilliam Ng's 5-Cut Method Video → youtube.com/watch?v=UbG-n--LFgQBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.Aaron Knows DIYDoug F.00:00 Intro00:33 1. Material breakdown02:21 2. Gluing rails and fence03:09 3. Squaring the face03:50 4. Attaching rails and back05:04 5. Cutting a safety for the fence06:51 6. Optional dust channel07:28 7. Attaching the fence09:03 8a. Testing (2 Cut Method)11:43 8b. Testing (5 Cut Method)16:18 9. Finishing touches18:14 Credits
Make a Creeper Fence Jig // Step by step instructional Lets Make Things 2024-08-12 | In this video, I show you how to build a jig that uses the Fibonacci spiral to get precise fence adjustments for your woodworking projects. This jig is great for cutting dados and grooves and works well with both exotic and native woods. I’ll walk you through the whole process, from start to finish, so you can see exactly how it all comes together. Don’t forget to check out my website for the free plans and more details. Watch and learn how to make this handy tool for your shop!Free plans/materials/tools used/diagrams/step by step instructions → makethingswithrob.com/fence-creeper-jigFull video without instructions → youtu.be/q3NW0Px8AJkBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.Aaron Knows DIYDoug F.00:00 Intro00:45 1. Materials01:36 2. Making the creeper spiral04:40 3. Magnetic base and lid07:15 4. Simple studded knob08:04 5. Magnetic plunge assembly09:03 6. Operation11:03 Credits
Easy Sharpening & Honing Jig // Step by step build Lets Make Things 2024-07-30 | In today’s video, I’m excited to take you through the process of making a honing and sharpening jig. If you’ve ever struggled with keeping your chisels or plane blades razor-sharp, this DIY project is a game changer! I’ll walk you through each step, sharing tips and tricks I’ve learned along the way to ensure your jig is both functional and easy to use. Whether you’re a woodworking enthusiast, a mechanic, or just someone who loves maintaining their tools, this jig will help you achieve a perfect edge every time.As a bonus, I’m offering FREE plans for the jig! You can download them from my website makethingswithrob.com/single-bevel-blade-guide , so you can follow along or modify the design to suit your needs. Let’s get sharpening!Playlist of all bitesize tips used → youtube.com/playlist?list=PLEBXNh1Ik9Fnz4tYMHvZMdb14Bo-nhLRUFree plans → makethingswithrob.com/single-bevel-blade-guideBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.Aaron Knows DIYDoug F.00:00 Intro01:07 1. Materials01:47 2. Making the angle02:14 3. Shaping the body03:20 4. Heel tracks04:38 5. Attaching the heel07:04 6. Locking arm09:30 7. Calibration10:44 8. Demonstration12:20 Credits
Make a Hand Drill Jig that will give you Drill Press holes! // Step by step instructional video Lets Make Things 2024-07-20 | In this video, we're going to make a simple jig that helps you drill straight holes with a hand drill. But before we dive into the jig itself, let's talk about why straight holes are so important.When you're working on a project, whether it's woodworking, metalworking, or any other DIY endeavor, having accurate and straight holes is crucial for several reasons. First and foremost, straight holes ensure that your parts fit together properly, which is essential for creating a strong and durable structure. If your holes are crooked or off-center, you'll end up with parts that don't fit together as intended, which can lead to poor performance and even safety issues.Straight holes also make it easier to assemble and disassemble your project. When parts fit together smoothly, it's much easier to get them aligned correctly and avoid any issues during assembly. And if you need to disassemble your project for maintenance or repairs, straight holes make it easier to get everything back together without any frustration.In this step by step video, we'll quickly make something that I think you'll enjoy using in your shop. With this jig, you'll be able to drill straight holes in wood, metal, or any other material with ease and accuracy.Step by step, materials and tools used → makethingswithrob.com/hand-drill-jigBecome a patron! → patreon.com/makethings ←Huge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.Aaron Knows DIYDoug F.00:00 Intro01:08 1. Materials02:35 2. Mapping out cut lines03:51 3. Bandsaw work04:36 4. Adding the angle04:59 5. Handle and clean up06:17 6. Credits
How to Make a Woodworking Jig for Perfectly Flat Laminated Surfaces // Step by step instructions! Lets Make Things 2024-07-06 | In this video, I'll show you how to create a custom woodworking jig that ensures perfectly flat laminated surfaces. This jig is designed to help you glue multiple layers of wood together without any unwanted bends or warping. The jig uses plywood, which is a very stable medium that will keep its flat shape, and it fits inside of a woodworking vise.**Key Features:**- Easy-to-follow step-by-step instructions- Techniques to ensure a smooth, flat finish- Demonstration of the jig in actionWebsite for materials / tools used / step by step instructions: makethingswithrob.com/flat-surface-jigBecome a patron! → Patreon.com/makethingsHuge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.NukebertSam W.00:00 Intro00:47 1. Materials (with breakdown)01:13 2. Creating the tongue02:39 3. Glue up03:11 4. Leveling the surface03:42 5. Adding HDPE strip04:29 6. Example06:13 7. Credits
Make a Mallet from 4 pieces of stock...No Joinery needed! // Step by step video Lets Make Things 2024-06-18 | The woodworking mallet is as old as time. They're perfect for chisel work, for joinery and other tasks where you need to knock something into something else. Hammers and rubber mallets both are problematic as they leave marks, but a nice, stout mallet made from your own hands not only feels like an extension of your body, but it's much safer on your woodworking projects.In this video, I'll be showing you how to build a custom woodworking mallet from scratch. Whether you're a beginner or an experienced woodworker, this step-by-step guide will help you create a durable and functional mallet that will be a valuable addition to your toolbox. There are also free plans that you can use below to build this.Check out the Huntsman's Mallet (as mentioned in the video) → youtu.be/skOtffVrjREStep by step / Materials/tools used webpage for this build → makethingswithrob.com/make-a-wooden-mallet-quick👍 Don't forget to like, comment, and subscribe for more woodworking tutorials and projects!Become a patron! → Patreon.com/makethingsHuge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.Nukebert00:00 Intro00:27 1. Materials00:53 2. Handle top01:59 3. Mallet center03:31 4. Handle body05:07 5. Assembly05:38 6. Extras07:54 Credits
The EASIEST Shim and Wedge Jig...make it in less than 5 minutes // Step by step instructions Lets Make Things 2024-06-02 | Shims and wedges are essential tools in woodworking, helping to level surfaces, fill gaps, and adjust fits for a variety of projects. Joints like the mortise and tenon that accept wedges are an important way to lock and allow pieces to be dissembled. But these triangles can be difficult to create and cut due to the geometry of the slopes and the straightness that they need to be. In this video, I'll show you a simple and effective way to create shims using a table saw and only a few pieces of scrap wood. This will get your shims and wedges cut quickly, getting you back to work before the boss knows you're gone. Whether you're a seasoned woodworker or a DIY enthusiast, mastering the creation and use of shims can greatly improve the precision and quality of your projects...so let's get this started!Become a patron! → Patreon.com/makethingsHuge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.Nukebert00:00 Intro00:44 1. Materials & Build01:57 2. Setting up for repeatability03:16 3. The process (cut flip cut)04:04 4. Making shims04:30 5. No scraps left behind05:18 6. A few more examples06:58 7. Credits
Upgrading Your Knurled Thumb Nuts: A Simple DIY Hack Lets Make Things 2024-05-22 | In this tutorial, we're going to take your knurled thumb nuts to the next level by using hex nuts as a substitute. You might be wondering why you'd want to do this, but trust us, the results are well worth the effort. With a simple DIY hack, you can create locking thumb nuts that are not only cheaper, but with more torque that will give you a better lock.In this video, we'll walk you through the step-by-step process of converting hex nuts into knurled thumb nuts. We'll cover the necessary materials, tools, and techniques you'll need to get started. You'll learn how to properly prepare the hex nuts, apply the knurling technique, and finish them off with a durable coating.So what are you waiting for? Watch this video now and start making better knurled thumb nuts with hex nuts!Become a patron! → Patreon.com/makethingsHuge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.Nukebert
Box joint FOR the miter arm // Step by step Lets Make Things 2024-05-16 | If you own a table saw, you need a box joint jig. It's the safest, easiest, most precise way to create a 90˚ corner. Making boxes with this takes very little time and will make you feel like an experienced woodworker.In this comprehensive tutorial, we're diving into the art of crafting flawless box joints with a homemade jig. Whether you're a seasoned woodworker or just starting out, this step-by-step guide will empower you to create professional-grade joinery with ease.Join us as we walk through the construction of a custom box joint jig, designed to deliver unparalleled accuracy and repeatability in your woodworking projects. From selecting the right materials to precise measurements and assembly, we'll cover everything you need to know to build your own jig from scratch.Once your jig is assembled, we'll demonstrate hot to use it. You'll learn essential tips and techniques for achieving tight-fitting joints that elevate the quality and durability of your creations. I've also added a trouble shooting in case you have any problems. Get ready to unlock the secrets of precision joinery and unleash your creativity in the workshop!*Step by step/Materials/tools used (Free!)* → makethingswithrob.com/make-a-box-joint-jig-for-the-miter-armBecome a patron! → Patreon.com/makethingsHuge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.Nukebert00:00 Intro00:47 1. Important notes01:02 2. Improvising01:22 3. Adding channel for the t-track02:27 4. Jig body work05:14 5. Building the fence06:40 6. Keys & calibration09:30 7. Basic operation12:01 8. Troubleshooting tips15:16 9. Credits
Make a miter arm for your table saw! / Step by step directions Lets Make Things 2024-05-05 | The table saw sled has a number of advantages, but it’s bulky and not always needed to do smaller things. One might call it an overkill, for example, if all that’s needed is to cut a piece of stock into several smaller pieces. While I would never suggest that a sled is unnecessary, considering the miter gauge to be unnecessary would be just as faulty. The miter gauge is one of the most flexible tools that makes cutting angles simple, but it’s limited beyond that. Let’s add a miter arm that will give us some advanced abilities!But wait!If we’re going to use our miter gauge with the newly created miter arm, we need a good stop block system to make repeated cutting easier. The table saw’s fence has this ability…the miter gauge shouldn’t be left out. Besides this, having a t-track on the top will allow us to add jigs in the future with a simple t-bolt and thumb knob…and who doesn’t love expandability? In this chapter, we’re going to add a much needed system to what we created in the past chapter…a really good stop block system!*Step by step instructions, materials, tools* → makethingswithrob.com/make-a-miter-arm-for-your-table-saw*Playlist of all bitesize tips used →* youtube.com/playlist?list=PLEBXNh1Ik9FkJPFn5JKqQthnnB3zWDL4a*Link in the description:*Miter arm ruler tape → amzn.to/3H513cqNo Slop in the Stop → youtu.be/YokI6qqOLAsSelf centering hinge bit → amzn.to/3UEkTn7As an amazon associate I earn from qualifying purchases.Become a patron! → Patreon.com/makethingsHuge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.Nukebert00:00 Intro01:39 1-1. Strip explanation02:27 1-2. Lamination the strips03:00 1-3. Squaring up the arm04:13 1-4. Attaching the fence to the gauge05:28 2-1. Stop block materials05:44 2-2. Profile block06:56 2-3. Attaching the t-track07:46 2-4. Finishing the stop block09:57 2-5. Adding the tape and cutting to size10:50 Thanks Patrons!
Make Dovetail Joints with a Bandsaw // Jig + Marker + Directions Lets Make Things 2024-04-20 | A good dovetail joint is essential for both functional and aesthetic reasons, making it a cornerstone of fine woodworking and craftsmanship. These types of joints can easily be created with a hand saw and a few years of hand saw experience under the belt. But...for the rest of us that are not trained to make these, making a dovetail can be a difficult chore to make with a power tool due to the intricate angles. In this video, I'm going to show you a jig that you can use that will help you make the dovetail you've dreamed of making...with a bandsaw.The jig uses a base and 2 carriages to create the tails and the pins. You'll also need to mark your stock, so I've included an easy to make dovetail marking jig.WEBSITE → Step by step with materials and tools used → makethingswithrob.com/dovetail-marker"Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9FnSgm6QQu0EHHVHwFWyAwetBecome a patron! → Patreon.com/makethingsHuge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.Nukebert00:00 Introduction01:45 1-1. Materials and tools (Dovetail marker)02:42 1-2. Cut glue cut04:24 1-3. Half tail marker05:24 2-1. Materials (Pins)06:13 2-2. Cutting the angle braces07:07 2-3. Attaching the braces to the pin base08:03 2-4. Adding the pin top surface and fence09:13 2-5. Bandsaw miter slot bar11:15 2-6. Squaring up the fence11:42 3-1. Materials and overview (Tails)12:16 3-2. Miter bar addition12:23 3-3. Adding a fence14:38 4-1. Marking thickness lines (Directions)15:38 4-2. Tail taping and marking18:51 4-3. Tail cutting21:07 4-4. Mating ends21:45 4-5. Tail cleanup22:16 4-6. Marking pins24:00 4-7. Pin cutting & hogging26:09 4-8. Cleaning up pins26:38 4-9. Box assembly27:54 Credits
Make a Magnetic Bandsaw Stop (Step by step!) Lets Make Things 2024-03-31 | Most of the time we make straight cuts with the bandsaw. Other times, we need a stop we can rely on for cutting things like joints. Today, we're going to make a magnetic bandsaw stop. It has a studded knob that makes it easy to raise and lower a magnet that locks this jig to the table.Webpage for this coming soon!Become a patron! → Patreon.com/makethingsHuge thank you to my patrons that keep this thing going!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.Nukebert00:00 Intro00:24 1. Mapping out lines01:16 2. Shaping the body02:18 3. Studded knob build03:19 4. T-nut added to the top03:57 5. Cutting bolt to size04:23 6. Body construction05:31 7. Adding tracker runner (optional)06:21 8. Lap joint demonstration07:44 9. Credits
Sanding with PVC // Techniques Lets Make Things 2024-02-24 | Spindle sanders are the best way to clean up curves. There are times where they just don't work as things are too large, cumbersome or long. A cove, for example, can rarely, if ever, be cleaned up with a spindle sander. But we can make an incredibly simple hand sander out of a simple piece of PVC pipe. I think you'll be amazed by how much power these are!Become a patron! → Patreon.com/makethingsThank you to my patrons!*MAKER TEAM*Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.Bruce GC#MTbitesize00:00 Intro00:26 1. Materials01:08 2. First method04:02 3. Second method05:44 4. A couple examples06:11 5. Credits
Floating Belt Sander Fence // Step by step plans...Free! Lets Make Things 2024-02-10 | Belt sanders are incredibly inaccurate. Whenever I use one, I'm always worried I'll have a hard time getting a clean, square sanding. Today, let's make a fence that we can use as an index point to make sure that we sand at a 90˚ angle from the surface. This fixture will be easy to remove and is not a permanent jig attached to our belt/disk sander.Webpage for the build → makethingswithrob.com/make-a-floating-belt-sander-fixture"Playlist of all bitesize tips used" → youtube.com/playlist?list=PLEBXNh1Ik9FmZ4ZxpfrlHv7M9FoOPd3IDBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.Aubrey G.00:00 Intro00:32 1. Materials01:27 2. Attaching the base plate (pt 1)02:51 3. Attaching walls to the base board04:28 4. Attaching the base plate (pt 2)04:59 5. Attaching the fence07:22 6. Floating? And operation10:08 7. Credits
Make a DRILL PRESS v-block jig for dowels Lets Make Things 2023-12-14 | A V-block is basically a v, cut into a block that you can place round or strange shaped objects in to cut or drill. I've made a dowel cutter for the bandsaw, and while that will work to drill a hole, it doesn't allow you to attach it to the jig like this does, by using painters tape. Attaching the dowel to the jig gives you hands free access to finding and making a perfectly centered hole...or several holes in succession.Step by step build / materials / tools used on the website → makethingswithrob.com/make-a-drill-press-v-block-for-dowelsBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.00:00 Intro00:46 1. Materials01:03 2. Making Triangles01:46 3. Gluing Triangles On03:29 4. Temporary Attachments05:31 5. Marking & Drilling07:14 6. Credits
Make a Steady Rest Fixture for your Lathe // Step by Step Lets Make Things 2023-11-29 | A lathe has a head stock as well as a tail stock. We place our lumber that we want to round between both points. In this scenario, normally, you really don’t need anything else to use the lathe. In fact, the head stock alone can be enough to hold onto the work you’re working with. The trouble comes when you’re trying to work on the end, like if you want to drill a hole, or if you’re making a bowl. This is when a steady rest really helps out as it gives you a second point of contact that keeps your work…steady. In this video, I’m going to show how I made a stripped down version of a steady rest that uses clamps to hold it to the bed as well as the wheels arms to the body.Full step by step plans → makethingswithrob.com/make-a-steady-rest-for-your-latheAdvanced Steady Rest (With knobs) → youtu.be/60lj5ODXjjABecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.00:00 Intro00:43 1. Materials01:24 2. Creating "the frame"04:22 3. To knob or not to knob05:26 4. Option 1 or option 206:31 5. Frame Assembly08:05 6. Base09:11 7. Arms12:54 8. Operation
Make a simplified track saw Lets Make Things 2023-11-12 | A plunge or track saw is a wonderful tool that solves the difficult problem that cutting a piece of plywood with a table saw can be. But if you don't do a lot of plywood or sheet good cutting, a good straight edge works...and works well. I've made a more complicated conduit track saw build that works, but it's unnecessary as you only need a good straight edge to get a perfect cut.In this video, we're going to make that straight edge. It requires very few tools and very few materials (unistrut, thin plywood) to make and I promise, you'll never look at the table saw again when you need to cut sheets down.Step by step instructions → makethingswithrob.com/make-a-simplified-track-sawBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.00:00 Intro00:35 1. Materials and tools01:18 2. Cutting to size01:55 3. Drilling and attaching the strut04:35 4. Creating zero for alignment05:04 5. Example06:01 6. Credits
Marking Gauge Update // The Flipper Strikes Back Lets Make Things 2023-10-28 | The Marking Gauge is a unique part of history. I've used a number of cutters, but I really like having a sharpened pencil line to lay out marks. This is an update to the video I made about 6 months ago, removing the magnet and adding a flipper.For the full build of the entire Marking Gauge → makethingswithrob.com/make-a-marking-gaugeFor just the video → youtu.be/iENrjQHRDpUFor the moldy oldie that I made years ago with a printing rod → youtu.be/ERZTLopnow4Become a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.#MTbitesize
Hold Down Clamp Build // Wood Lamination 101 Lets Make Things 2023-09-21 | Let's face it, if you're going to use t-tracks, if you're going to make jigs, you're going to, at times, need to hold things down. A hold down clamp does just that: it holds things down. In order to get pressure to hold things down, we need a little bit of spring. We can create that spring with a hold down clamp made from laminating wood. Don't worry, this is an easy thing to do, so long as you have the right kind of mold or form to do it. In this video, we're going to go over the steps needed to make a very basic hold down clamp out of oak and walnut. Check out the website for an indexed step by step as well as materials and tools used. This is going to be a fun one!Step by step/Materials/Tools used/Schematics → makethingswithrob.com/make-a-hold-down-clampThin Strip Jig → makethingswithrob.com/spring-thin-strip-jigPlaylist of all bitesizes used → youtube.com/playlist?list=PLEBXNh1Ik9FlrBeh2w9oYp9gJEds0ricwBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.00:00 Intro00:35 1. Buttering the bread (glue up)01:35 2. Mapping out the form02:38 3.Carving the form03:22 4. Cutting bendable thin strips04:21 5. Finalizing the form06:33 6. Bent stock glue07:20 7. Rounding and shaping the ends08:54 8. Better friction11:20 9. Credits
Quad Screw Vise Build // Would Moxon be proud? Lets Make Things 2023-08-25 | The Screw vise, also known as the Moxon vise, is an old invention. I decided to add a few things to it for a better workflow in my shop. Instead of a couple screws, I went up to a Quad with absolutely no threaded rods hanging out the front...like the original double screw vise. This allows me to work on joints instead of just half of a joint. Tracker runner gives it a better grip and allows the vise to be much lighter.Absolutely free plans → makethingswithrob.com/make-an-advanced-moxon-double-screw-viseSimple to make knobs → youtu.be/ZNUq53yvj6c?t=441Bitesize's from this video → youtube.com/playlist?list=PLEBXNh1Ik9FloIlY13F5CryEz4557UwZOBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.00:00 Intro01:11 1. Mapping out the body04:09 2. Prefacing the top and bottom jaw06:53 3. Notching the body (dog hole)07:25 4. Drilling out the vertical holes08:52 5. Latch and handle (optional)18:28 6. Attaching the bottom jaw18:53 7. Finishing the upper and front jaws22:12 8. Dog hole connection27:56 9. Credits
Simple Moxon (Double Screw) Vise // From Start to Finish (1 Power Tool Needed) Lets Make Things 2023-08-10 | The double screw vise, also known as the Moxon vise, is a relatively old devise that's been documented as early as 1676. One of its major strengths is the ability to clamp stock for joint creation. While a lot of vises made for benches can be very expensive, this one is extremely cheap and can be made from a single trip to the hardware store. I'll show you how to make knobs that work just as well as any other Moxon kit that's on the market. To sweeten this, this vise racks, allowing tapered and non square stock to be clamped with ease. All of this and you only need a drill press or even just a hand drill if you have steady hands.Cheap + easy + extremely important = you can't afford to miss making one of these!Step by step/Materials & Tools Used webpage for this video → makethingswithrob.com/make-a-moxon-double-screw-viseThe Bench Knobs I talked about in the video → youtu.be/zsDHsLC5IKYBitesize's (tips and tricks) for this video → youtube.com/playlist?list=PLEBXNh1Ik9FmQeAikEqIAJaGj4k7vOhIiBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.00:00 Intro00:49 1. Two Methods to Attach02:45 2. Adding Vise Holes04:25 3. Transferring Holes04:41 4. Conduit for racking (Optional)05:50 5. Snugging each post06:18 6. Epoxy, glue and screws07:21 7. Creating simple knobs
Steel bench vise appliance // Two methods! Lets Make Things 2023-07-25 | Woodworking bench vises are traditionally built into the bench: Great for woodworking projects, terrible for cutting or working on metal. But mounting a steel vise to the surface can get in the way of larger projects. We can get around that by making a vise on a jig that's easily able to be removed when not needed. I've got two different jigs I've come up with that will work: One with a woodworking vise, the other if you don't have a vise but don't want to mount your steel vise to the table.Marking Gauge → makethingswithrob.com/make-a-marking-gaugeAll the bitesize tips used in this video → youtube.com/playlist?list=PLEBXNh1Ik9FkHKzT-eZ770rYzJGDlum0XFull step by step (Materials/Tools used) → makethingswithrob.com/build-a-steel-vise-bench-applianceBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.00:00 Intro00:25 1. Materials (V.1 & 2)00:58 2. Steel vise mapping (V.1 & 2)02:07 3. Adding crossbar (V.1)04:15 4. Adding crossbar (V.2)05:30 5. Adding dog hole (V.2)07:45 6. Adding the vise (V.1 & 2)08:43 7. A few cuts (V.1)09:56 8. Bonus: Wood jaws
Magnetic Bench Appliance #lmts #bench #magnetic Lets Make Things 2023-07-25 | Full Build → youtu.be/NyT318GPbC4Become a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.
Herringbone Magnetic Appliance Lets Make Things 2023-07-18 | Cut steel, clean it up and prevent it from getting into your wood projects with a tool holder magnet. Yeah, it was a little silly adding a handle to a magnet to make a wand...when the magnet tool holder alone could have worked, but I love giving my tools character as well as playing around with new techniques. First in this video: herringbone design, split dowels and wedges, making a tang and adding it to a handle.For all the bitesize tips in the video, I made a playlist → youtube.com/playlist?list=PLEBXNh1Ik9FluKyC8HLDJIdl_yian_Zr9Become a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.
Bandsaw Jig Made for Lathes // Step by step guide Lets Make Things 2023-07-10 | If you want to cut some corners when it comes to the lathe (literally!), making a jig like this will help do that. This makes lathe work a lot easier as you're not trimming back the corners, waiting to hit the actual meat of your stock. I've used this for years and there's nothing like these guys...they really do do a lot of work that you don't want to do later on.I do have a free step by step set of plans with materials/tools used here → makethingswithrob.com/make-a-bandsaw-sled-for-your-latheMarking gauge → youtu.be/iENrjQHRDpUFor the advanced version that's slightly more complicated → youtu.be/csfzN-tD_18Become a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.00:00 Intro01:33 1. Opening02:12 2. The four columns04:06 3. Making the bed06:19 4. Attaching the columns07:37 5. Base plate slots09:03 6. Expansion bar11:03 7. Base and cradle attachment11:21 8. Cutting the blade center12:37 9. Safety precautions14:14 10. Credits
Bandsaw jig made for the lathe #lmts #shorts #bandsaw #lathe Lets Make Things 2023-07-10 | Quick video showing how I made my bandsaw jig that works great for the lathe.For the full-size video → youtu.be/csfzN-tD_18Step by step to build a simpler one (materials / tools used) → makethingswithrob.com/make-a-bandsaw-sled-for-your-latheBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.
Bandsaw jig built...for the Lathe Lets Make Things 2023-07-03 | Rounded objects are scary to cut on the bandsaw (in fact, anything not _flat_ against the table should be avoided when cutting). If we create a two point contact, we can replicate the flat surface, thus making it much safer to cut round shapes with the bandsaw.On the other hand, rounding square stock is a chore and taxing on lathe tools when stock needs to be made round. If we can cut the corners off of our stock and bring them to a rounder shape, we're doing less dulling with our tools.This tool, used on the bandsaw, is an excellent way to work with stock going to or coming from the lathe.Like the folding knob in this video? Watch it here! →youtu.be/UtcXUmEp7o8To view all the *bitesize tips* and techniques used in this video → youtube.com/playlist?list=PLEBXNh1Ik9FlyB4Gu4i-SPSgx4ypd6K44Stay tuned for a step by step video coming soon!Become a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.#MTbitesize
Bench Vise Crank #lmts #shorts #bench Lets Make Things 2023-06-26 | Full Build → youtu.be/PW0n8EU0Ud0Become a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.
Bench Vise Crank (A Handle on a Handle!) Lets Make Things 2023-06-25 | If you're doing a lot of turning with your vise, try making a crank for yours. It's a quick way to lock and unlock your vise and seems like something that should have been back before the quick release vise was produced. If you like watching how homemade cranks, knobs or handles are created, this is the video for you.For all the bitesizes mentioned in this video → youtube.com/playlist?list=PLEBXNh1Ik9Fl7mrdNNfIpjP9RqKE2saY5More projects: www.makethingswithrob.com/proBecome a patron! → Patreon.com/makethingsThank you to my patrons!Michelle BKeith CurrentWilliam L McNallyJerry AdamsZach FinchRich LightfootTutor the BarbarianMike LornitisLes N.Gary G.
