BernieDawg Cinema
How to Light and Operate a Vintage Kerosene Stove
updated
Cups: oldcolemanparts.com
The Midicap for US Military stoves is still available here:
https://i.materialise.com/en/shop/item/berniedawg-midicap-for-us-military-stoves
Intro/Outro music courtesy of the YouTube video library:
Cool Intro - Stings by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
So... I found this old unpublished video in my pile of "unlisted" YouTube videos and I am presenting it on how you should start up a Svea 123 (no R - ie: no built-in cleaning needle).
Note that I do not try to light the stove in a windstorm or even outside. If you are outside, light the stove in a sheltered area out of the wind or hunkered down behind a sunblock or use a windshield.
Note that I let the stove idle on low for a bit after lighting to let it build up heat and pressure.
The stove in this video has a fairly worn jet orifice so I have raised the flame plate substantially in lieu of replacing the jet to get a close to stoichiometric mix. Ideally, a new jet may be a better choice.
Note that I have positive shut-off of the spindle valve. There is no "candling" (when there is a small flame after the spindle valve is closed). Candling is most often caused in the no R stove by a damaged spindle tip from users closing the spindle too aggressively. These damaged spindle tips and the seat in the valve body need to be repaired.
In the 123R stoves, candling is most often caused by users/rebuilders setting the cleaning needle too low which prevents the spindle valve from closing all the way. Try the 123R stove without the cleaning needle in place. If you still have candling without a cleaning needle you likely have a damaged spindle tip and/or spindle seat. This should be repaired.
It's looking like that would be a good video for me to make as a stand-alone: how to repair spindle tips and seats. I'll see if I can't get that one out soon.
At no time should any competent stove advisor say that "candling is common and you just have to live with it". No! That's not at all true. That is the statement of a hack who needs to further develop skills before advising others. 🙄
Got questions or need help? Just drop an email to: bd@berniedawg.com . It's free!
YouTube comments is a poor choice for help with your stove.
Videos:
Rebuilding videos:
youtu.be/CVe8LfXCalA
youtu.be/3ytcym3qhcA
Fuel cap seals:
youtu.be/d6SEE1ToCSQ
Help with your stove or additional questions?
bd@berniedawg.com
You can order a PolarDawg from:
https://i.materialise.com/en/shop/item/polardawg-2-for-optimus-polaris-optifuel
Please read the cap instructions here: http://tinyurl.com/lvv3syn
Stoves and silent damper caps are not suitable for use as tent heaters - very dangerous!
Questions? bd@berniedawg.com
Intro/Outro music courtesy of the YouTube Audio Library which says I am "free to use this audio track in any of your videos, including videos that you monetize. However, you must include the following information in your video description":
Funk Game Loop by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100839
Artist: http://incompetech.com
Thanks, Kev!!
The fuel cap on the Lixada is threaded a metric size and is not compatible with the Svea/Optimus SRV fuel caps found on Svea 123/123R, Optimus 111 series, Optimus 22 series or Optimus 80 stoves.
If you want to make your Chinese-made stainless steel Lixada stove quiet, then the BernieDawg Minicap, with or without Legs is the way to go.
I'm a bit concerned about the lack of the traditional Swedish stove safety features that are absent on the Lixada. So, I can't endorse it and you buy and use the Lixada at your own risk.
But, if you are an accomplished stove user or if you already have a Lixada, then the Minicap will enable you to make the stove run with much less noise.
Here's where you can order one:
https://i.materialise.com/en/shop/item/berniedawg-minicap-with-legs-for-small-stoves
And... for those of you who are interested in such things, the fuel cap on the Lixada stove is threaded with a M20x1.00 metric thread. Standard Svea/Optimus SRV (safety release valve) fuel caps will not fit on the Lixada.
Want more information or have additional stove questions? Contact my free stove help line at: bd@berniedawg.com
Intro/outro music courtesy of the free YouTube Audio Library which tells me I must include the following message in my description box:
African Drums (Sting) by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
Artist: http://www.twinmusicom.org
Need new aluminum cones to seal your burners to the feed lines? Contact Base Camp in England for those here: base-camp.co.uk
Do you have questions about stoves or stove repair? Contact BD at: bd@berniedawg.com
Check out the information and documents for free download at www.berniedawg.com
Intro/Outro music courtesy of YouTube Audio Library which says I can use this music in my videos if I include the following message in my description box:
Cool Intro - Stings by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100504
Artist: http://incompetech.com
Most folks find the burner in the Modified not all that great when they get one from surplus sales, and in this video I show how I corrected the burner to function better.
Need help? Have questions? Contact BernieDawg here:
bd@berniedawg.com
Or, check out my website at www.berniedawg.com for lots of stove information.
Intro/Outro music courtesy of YouTube Audio Library under the Creative Commons plan which says I have to include the following message in my description box order to be legal and a righteous dude:
Matt's Blues by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100165
Artist: http://incompetech.com
If you have some tools you are willing to part with, or, if you have questions about this or any other stove, just drop an email to: bd@berniedawg.com .
Intro/outro music courtesy of the YouTube Audio Library.
This tune is "Curb Stomp" by Underbelly.
Here is the link to my web page where you can download the manuals for this stove, both in German and in several different formats and layouts in English: berniedawg.com/heinze-geniol-german-army-kocher-stove-manuals The translation of the box badge is there, too.
The bag featured in this video is widely sold on eBay as a "Czech gas mask bag". Use those search terms at eBay and you should find it. It fits the British Military #12 stove, too, about the same fitment as the German army stove in this video.
The stainless steel windshield in this video is from eBay seller simonchantwus_gmail in Taiwan. He has lots of other cool stove stuff, too. Just search eBay for "WINDSHIELD FOR Heinze Geniol STOVE". A little spendy, but if we don't support third party cottage stove part suppliers, we won't have parts in the future. Don't be a cheap skate.
Questions about this or other stoves? YouTube comments kinda sucks for that. Please don't write me pages describing your stove problem in comments. Thanks! Just drop an email to: bd@berniedawg.com
Intro/Outro music courtesy of YouTube Audio Library. They say I don't have to credit this artist this time around, but I will anyway: Jimmy Fontanez/Media Right Productions, song: "Feel the Funk".
These should be serviced. The hardened pips can be stubborn to remove from the cups, but here's an easy way to get the job done that I show you in this video. Please service your SRV fuel caps if they are older. I have a pair of videos about that subject right here: youtu.be/d6SEE1ToCSQ and here: youtu.be/a0BRBzuN0g8
Questions? Write an email to: bd@berniedawg.com
Intro/outro music courtesy of the YouTube Audio Library. In return for use of this track, I'm required to post the following in my description box:
"African Drums (Sting) by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
Artist: http://www.twinmusicom.org"
I volunteered to see if something could be done to modify the Taiwan cap so that it would work properly with the #12 stove without depowering the stove. Here's my report on my success with modifications. 🥳👏😊
In the meantime... if you want to make your British Military #12 vehicle stove work more quietly, you can invest in a BernieDawg 3D-printed Top Dawg silent damper cap. It is custom-made just for you and is available for ordering from:
https://i.materialise.com/en/shop/item/british-military-no-12-stove-topdawg-silent-damper-cap
BernieDawgs Stove Lab website has lots of useful stove information and documents - http://www.berniedawg.com , check out the list of stove part suppliers there: berniedawg.com/stove-part-supplier-links
BernieDawg Cinema YouTube channel has scores of helpful how-to and DIY videos on stove repair and renovation - youtube.com/user/h2ojnky
Intro/outro music courtesy of and by permission from the YouTube Audio Library. (They say I have to provide the following my description box):
Aces High - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100763
Artist: http://incompetech.com
https://i.materialise.com/en/shop/item/british-military-no-12-stove-topdawg-silent-damper-cap
Sorry they cost so much. There is a lot of material in this really big cap.
Questions? bd@berniedawg.com
Intro/Outro music courtesy YouTube Audio Library. Tune: "On My Way Home" by The 126ers
You can also check my website at: www.berniedawg.com
Any Optimus/Svea SRV (safety release valve) fuel cap is completely compatible with the threading on the Radius tank fuel filler neck.The Optimus/Svea SRV fuel cap was used during the testing of this stove using white gas (aka naphtha) and denatured alcohol (aka ethanol) fuels. Though a careful, responsible and attentive stove user might not find it necessary to use the Optimus/Svea SRV fuel cap, the idea on the conversion is that the Optimus SRV fuel cap is the user cap when white gas or DA are used as fuels in order to promote safety. For packing and transport, swap the Optimus/Svea SRV fuel cap for the standard Radius fuel cap.
NRV = non-return valve, a one-way valve in the bottom of the pump tube that allows you to pump air into the tank but keeps fuel and air inside from coming back out the pump tube.
More detailed video on NRVs right here: youtu.be/b-d_YVVuLaA?t=226
Here are the details on the multi-fuel conversion.
The alcohol air restrictor tube is made from 17/32" diameter thin wall brass tubing easily findable in good hobby shops or hardware stores. The air restrictor tube should be fitted with four holes at one end and three holes at the other. This allows for changes in altitude. The holes in the end of my tube were made with a #30 (0.1285 diameter) drill bit, though you will need to adjust the diameter of those restrictor tube holes to match your jet and your type of DA (denatured alcohol). A range of #33 to #27 drill bits should get you a tube that will do the job. Obviously some experimentation and trial-and-error is required. Avoid running a stove with a restrictor tube which makes the mix too lean. You'll see your outer silent cap getting red if you get too lean. Enlarge the restrictor tube holes to get a richer mix. Better to have a little yellow in the flames from a rich mix than to light up the cap with too lean a mix which will greatly shorten the life of your outer cap.
The dedicated alcohol jet (#2508 is available from The Base-Camp in the UK, base-camp.co.uk/Optimus.html , or can be scavenged from the hundreds of Homestrand or Kenyon Mariner two-burner alcohol boat stoves that still appear at auction.
Intro/outro music is from the YouTube Audio Library to be used freely and with permission per these terms and conditions:
"Your use of this music library (including the music files in this library) is subject to the YouTube Terms of Service. Music from this library is intended solely for use by you in videos and other content that you create. You may use music files from this library in videos that you monetize on YouTube.
By downloading music from this library, you agree with the following:
You may not make available, distribute or perform the music files from this library separately from videos and other content into which you have incorporated these music files (e.g., standalone distribution of these files is not permitted).
You may not use music files from this library in an illegal manner or in connection with any illegal content.
You agree to comply with these requirements when you use music from this library."
Music author is Kevin Macleod. Tune is "Corncob - Country".
Cap on the right hand stove is available here:
https://i.materialise.com/en/shop/item/berniedawg-midicap-for-us-military-stoves
You have to remove the flame plate from the stove to insert the cap. Startup can be a bit different, too. Check the instructions page:
berniedawg.com/berniedawg-silent-damper-cap-instructions
Questions? Email bd@berniedawg.com
Want more stove info? Check out www.berniedawg.com
Intro/outro music courtesy of the YouTube Audio Library which says:
"You’re free to use this song in any of your videos, but you must include the following in your video description:
Corncob - Country by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100565
Artist: http://incompetech.com"
Minicap here:
https://i.materialise.com/en/shop/item/minicap-without-legs
Cheers,! BD
Minicap here:
https://i.materialise.com/en/shop/item/minicap-without-legs
Questions? Just drop an email to bd@berniedawg.com . Thanks for watching!
Cheers! BD
PolarDawg here: https://i.materialise.com/en/shop/item/polardawg-2-for-optimus-polaris-optifuel
Cheers! BD
Cheers! BD
https://i.materialise.com/en/shop/item/puppydawg-silent-burner-cap
Cheers! BD
https://i.materialise.com/en/shop/designer/gary-adams
YouTube comments is not the place to ask long involved questions or seek product information. I sincerely hope you understand. Just drop an email to me at that address. I'll be happy to help.If you have questions about stoves, BD caps, stove repair, etc, contact me at:
bd@berniedawg.com
Thanks!
The intro and outro music is from the YouTube Audio Library. I am using it per the terms and conditions of the YouTube Creator Agreement. The music is Bumblebee by Quincas Moreira. Check that artist out!
This particular paint color is Dupli-Color EBHA09067 Hampstead Green. It's a fairly close match to the original Optimus green found on some Optimus 8 (not 8R!) stoves. Available in automotive shops throughout the USA.
Technical questions? Just drop a note to bd@berniedawg.com
Music courtesy of the YouTube Audio Library which tells me "You’re free to use this song in any of your videos."
Song: "Church of 8 Wheels" by Otis McDonald
You can reach me at: bd@berniedawg.com
Music in this video is free for use courtesy of the YouTube Audio Library provided I include the following information:
" You’re free to use this song in any of your videos, but you must include the following in your video description:
Aces High - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100763
Artist: http://incompetech.com/Aces High - Funkorama by Kevin MacLeod"
If you need a manual for your Svea 123/123R in jpg or pdf format, check this link:
http://www.berniedawg.com/svea-123r-manual
If your stove doesn't run like the one in the video, I have repair and refurbishment videos available here:
youtu.be/LNJSDacuCHQ and
youtu.be/-svgLuqyGG4
Also check my Svea 123/123R playlist here for other topics related to these stoves:
youtube.com/playlist?list=PL9Tg7BYD6fULxLmRcd7hQL_ZP2vyBqlZk
Still have questions? berniedawgstove@comcast.net
Music intro/outro and background soundtrack are free YouTube Audio Library tracks:
"African Drums" by Twin Musicom
and here's their disclaimer for my safety:
"You’re free to use this song in any of your videos, but you must include the following in your video description: African Drums (Sting) by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0) Artist: http://www.twinmusicom.org"
and
"Church of Eight Wheels" by Otis McDonald from YouTube Free Audio Library
Thanks for watching. Subscribers are awesome! Thanks!
BD = bd@berniedawg.com
berniedawg.com
Intro/Outro music from the YouTube Music Library. I'm required to say this:
African Drums (Sting) by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)
Artist: http://www.twinmusicom.org
Here are some links to proper materials you can use for your stove repairs. I get no money from these recommendations. Can other materials be used? Yes, but these examples are sure to function correctly.
Soldering materials - I’m not endorsing these particular soldering products, just providing the links as good examples of proper products for old kerosene stove repair.
63/37 eutectic rosin core solder amazon.com/MAIYUM-63-37-Solder-Electrical-Soldering/dp/B075WB98FJ
Rosin flux amazon.com/Delcast-Rosin-Soldering-Flux-Paste/dp/B00SVESNTC/ref=sr_1_6?crid=RPEAL3Q701N1
Brazing materials - I am endorsing the Harris products. But, I'm not getting paid to do so. Use these brazing items together with clean metal and an attentive and careful approach, and success is pretty much guaranteed.
Harris Safety-Silv 56 brazing filler wire for brass and copper alloys: amazon.com/Harris-Troy-Ounce-75310-5631/dp/B0713Y6V2F
Harris Stay-Silv white flux for brass and copper alloys: amazon.com/Harris-SSWF1-Stay-Brazing-White/dp/B002075B0U
I use a Bernz-O-Matic TS4000 on a 1 LB propane bottle and a TS8000 torch connected to a 5 foot hose (from Coleman) and which connects to a 20# propane tank. Both torches have piezo trigger starts.
Questions? berniedawgstove@comcast.net
Intro/Outro music from the YouTube Music Library. I'm required to say this:
African Drums (Sting) by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)
Artist: http://www.twinmusicom.org
Keep your metal absolutely clean. Use wet-dry carbide sandpaper to clean the metal. Use the correct and easiest-to-use brazing supplies. Don't use home-brew products! They don't work as well.
Brazing supplies can be found on Amazon or eBay. Search for the following product names that are within quotes.
Silver brazing wire: " Harris Safety Silv 50n "
Black flux for steel and other ferrous metals: " Stay-Silv® Black Flux "
Use these two products for steel stove cases.The nickel in the 50n promotes much better flow out than non-nickel silver brazing wire.
Paint? Dupli-Color Medium Maui Blue BGM0423 is the closest off-the-shelf match I've found for the most common of the Optimus blue paints and is what is used on the stove case in this video.
Questions or help needed? Contact the video content provider: berniedawgstove@comcast.net
Intro/outro music courtesy of the YouTube Audio Library and used with full permissions. Tune is "Live Worms" by Josh Lippi & The Overtimers.
Here is how to convert a regulated silent burner from kerosene to alcohol.
You need:
- an alcohol jet
- an air restrictor tube
The alcohol jets can be found in some types of alcohol-burning marine stoves or from this supplier in the UK:
http://www.base-camp.co.uk/Optimus.html
You need part #2508.
Use thin-walled 1/2” OD brass tubing available at hobby shops for building restrictors.
My restrictor that I made for this video is 1 1/2”(37mm) long. It has three holes, 3.2mm in diameter at one end. The other end has four holes, two of which are 3.2mm diameter while the other two are 3.6mm in diameter.
What size you holes end up with will depend on the fuel and the burner you are using. Try smaller and test, then adjust larger until you get them right for your setup. A Dremel tool can be used to make and enlarge the holes in increments.
Having a dual end makes it possible for you to use different formulations of alcohol by simply flipping the restrictor in the burner to the other end. “Green” denatured alcohol is typically almost all ethanol and will burn hotter and require larger holes. Methanol-heavy denatured alcohols have less energy and require smaller holes in the restrictor.
Here's a link to a too dark video from 2014 where I convert a chromed Primus 16 to alky:
youtu.be/5gdnWim5Ju8
BD:
berniedawgstove@comcast.net
Intro/Outro music courtesy of the YouTube Audio Library which says, “You’re free to use this song in any of your videos.” Song title: “Oceans” by Text Me Records/BobbyRenz.
Here's how to get that new-to-you vintage kerosene pressure stove up and running. The stove shown (mostly) in this video is a 1948 Primus #54 silent burner stove. Whether silent or roarer, the steps to get the stove running safely are the same.
- Stove Part and Stove Suppliers List Link here: http://www.berniedawg.com/stove-part-supplier-links
- Dental Tools, and lots of other great hobbies tools, including tons of Dremel accessories can be found at Widget Supply, the best online hobby supply store in the cosmos (I don't get a dime from saying that; I'm a happy customer and a fan): widgetsupply.com
- One-piece Viton NRV pips are being sold by Korean eBay seller gksk2146-3 at eBay. Just do a search for "viton packing stove" at eBay or check the link at the Stove Part and Stove Suppliers List Link above
- Jet prickers (cleaning needles) are available from a variety of sources listed at (especially Base-Camp and Juliands): http://www.berniedawg.com/stove-part-supplier-links
- NRV wrench tools in various styles and flavors are available from eBay sellers in the UK (Juliands rocks!!) and In Korea, and also brick-and-mortar supplier Base-Camp in the UK, check the linked list above. Base-Camp:
http://www.base-camp.co.uk
You can get full sets of seals and pips and leather pump cups for your particular flavor of kerosene pressure stove from The FettleBox in the UK: fettlebox.co.uk
Intro/outro music courtesy of YouTube Free Music Library. YouTube says clearly, "You’re free to use this song in any of your videos."
Song: "Feel the Funk"
Artist: Jimmy Fontanez/Media Right Productions
The silent damper cap I show in the video is a BernieDawg Minicap With Legs. You can order one right here:
http://shpws.me/DWiP
or here:
https://i.materialise.com/en/shop/item/berniedawg-minicap-with-legs-for-small-stoves
Intro/Outro music is from the free YouTube music library. This one says "You’re free to use this song in any of your videos."
And the song is "Oceans" by Text Me Records / Bobby Renz
BernieDawg “Wide Body” cap here:
https://i.materialise.com/en/shop/item/g-series-wide-body-for-the-phoebus-725-stove
Stove paint for restoration/repainting is VHT SP402 found here:
amazon.com/VHT-SP402-Engine-Metallic-Copper/dp/B002NUFVRW
or, at your local and well-stocked auto supply store. (Don't forget to cure it completely for fuel-proof use.)
EBay seller gksk2146-3 in South Korea is selling a reproduction flame plate for these stoves. I've not tried it, but I have one on order to check it out.
Intro/outro music from the Free YouTube music library which says I must use the Creative Commons rules by publishing the following message in the description of my video like this:
"You’re free to use this song in any of your videos, but you must include the following in your video description:
Matt's Blues by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100165
Artist: http://incompetech.com "
The tank color on the 502 is "Magpul FDE" Aluma-Hyde® II from Brownells. brownells.com
The burner bowl was derusted and painted with "cast iron" VHT FlameProof paint. The manifold was painted with "flat aluminum" VHT FlameProof paint.
vhtpaint.com/high-heat/vht-flameproof-coating
Some of the replacement stove parts were from Old Coleman Parts.
oldcolemanparts.com
berniedawgstove@comcast.net
In this video I rebuild the burner and the tank, and install the burner on the stove tank of the Optimus 111B stove. I show you some tips and tricks and some tools you need to get the job done right. I test the stove and show how to set the cleaning needle.
Here is an easy-find video index for this video segment:
Burner Reassembly - 00:44
111B Burner Facts of Operation - 05:08
Spirit Pan reassembly - 06:46
Tank and Burner Reassembly - 07:18
Stove Testing - 11:16
Cleaning Needle Installation - 12:44
Final Testing - 14:26
This third video concludes the three-part video series on the Optimus 111B.
Check my stove part supplier article at my blog for listings for tools and parts for this stove and others:
http://www.berniedawg.com/stove-part-supplier-links
Kroil is the superior metal part penetrant that I recommend. It works much better than other products or home-brewed products like "Ed's Red": http://www.kanolabs.com or at Amazon here: amazon.com/Kano-Kroil-Penetrating-liquid-KROIL/dp/B000F09CF4
Ear forceps, aka alligator forceps can be found for cheap on eBay. Just search on the term "ear forceps".
Dental tools, Dremel tools, and other great stuff for stove work are sold at great low prices and can be found at Widget Supply: widgetsupply.com
You can find a pretty okay exploded diagram view of the 111 stove (the 111B's kerosene cousin) at this link: http://www.base-camp.co.uk/exploded%20views/Optimus/111%20Hike.htm
Intro and outro music used freely from the YouTube Music Library as follows:
I am free to use this song in any of my videos, but I must include the following in My video description:
Corncob - Country by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100565
Artist: http://incompetech.com
In this video I rebuild some of the parts that I disassembled and cleaned so they will be ready to reinstall in the stove tank of the Optimus 111B stove. I show you some tips and tricks and some tools you need to get the job done right.
Here is an easy-find video index for this video segment:
0:16 - cleaning tools and supplies
1:57 - wind shield cleaning and rust treatment
2:56 - a look at my buffer setup and the buffed heat shield
3:47 - NRV (non-return valve aka check valve) reassembly
7:24 - pump operation discussion and pump reassembly
12:26 - SRV (safety release valve) fuel cap reassembly
Stay tuned for the next segment where I reassemble the burner and the rest into a working stove! BD
Check my stove part supplier article at my blog for listings for tools and parts for this stove and others:
http://www.berniedawg.com/stove-part-supplier-links
Kroil is the superior metal part penetrant that I recommend. It works much better than other products or home-brewed products like "Ed's Red": http://www.kanolabs.com or at Amazon here: amazon.com/Kano-Kroil-Penetrating-liquid-KROIL/dp/B000F09CF4
Ear forceps, aka alligator forceps can be found for cheap on eBay. Just search on the term "ear forceps".
Dental tools, Dremel tools, and other great stuff for stove work are sold at great low prices and can be found at Widget Supply: widgetsupply.com
You can find a pretty okay exploded diagram view of the 111 stove (the 111B's kerosene cousin) at this link: http://www.base-camp.co.uk/exploded%20views/Optimus/111%20Hike.htm
Intro and outro music used freely from the YouTube Music Library as follows:
I am free to use this song in any of my videos, but I must include the following in My video description:
Corncob - Country by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100565
Artist: http://incompetech.com
In this video I completely disassemble the tank and burner of a Optimus 111B naphtha-fueled camping stove. I show you some tips and tricks and some tools you need to get the job done right.
Stay tuned for the next segment where I clean and assemble the parts back into a working stove! BD
Check my stove part supplier article at my blog for listings for tools and parts for this stove and others:
http://www.berniedawg.com/stove-part-supplier-links
Kroil is the superior metal part penetrant that I recommend. It works much better than other products or home-brewed products like "Ed's Red": http://www.kanolabs.com or at Amazon here: amazon.com/Kano-Kroil-Penetrating-liquid-KROIL/dp/B000F09CF4
Ear forceps, aka alligator forceps can be found for cheap on eBay. Just search on the term "ear forceps".
Dental tools, Dremel tools, and other great stuff for stove work are sold at great low prices and can be found at Widget Supply: widgetsupply.com
You can find a pretty okay exploded diagram view of the 111 stove (the 111B's kerosene cousin) at this link: http://www.base-camp.co.uk/exploded%20views/Optimus/111%20Hike.htm
Intro and outro music used freely from the YouTube Music Library as follows:
I am free to use this song in any of my videos, but I must include the following in My video description:
Corncob - Country by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100565
Artist: http://incompetech.com
Music is from the YouTube Music Library which says I may use it without charge in my video. Music artist: Diamond Ortiz, Song: Toe Jam
Need parts or consumables for the SVEA 123/123R or other stoves? Check my list of current suppliers I know about at my stove blog:
http://www.berniedawg.com/stove-part-supplier-links
Intro/Outro music from the YouTube Music Library. I'm required to say this:
African Drums (Sting) by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)
Artist: http://www.twinmusicom.org
Credits to Classic Camp Stoves where you can read and research catalogs and documents (for a fee) as a subscribing member of the social forum. classiccampstoves.com
Use Harris Safety-Silv 50 or 56 silver brazing wire for brazing. Never use filler that is called "silver solder" and/or contains tin (Sn). Get brazing products at welding shops not a plumbers supply.
Use Harris Stay-Silv White flux for fluxing.
All metal must be spotlessly clean for silver braze filler to bond with the metal. Use 400 or 600 grit black carbide sandpaper to clean metal.
Get small amounts of metal for projects like this from Online Metals - it's the place to go. onlinemetals.com
BernieDawg made this video and did all the work in the video. Comments are awesome! But... questions about services and prices and business stuff are best directed to BDs email at: bd@berniedawg.com Thanks!
Intro/background/outro music courtesy of YouTube free Audio Library. Artist: Magic In The Other, Song: "Ready Set Go!"
Sadly selling it off. 😭😣
If you are interested in the BD 4010 silent cap reproduction, you can find it at https://i.materialise.com/en/shop/item/primus-100-reproduction-flame-plate
BD Wide Body Cap for the Phoebus 725:
https://i.materialise.com/en/shop/item/g-series-wide-body-for-the-phoebus-725-stove
Base-Camp stove parts in the UK: http://www.base-camp.co.uk
Intro and Outro music courtesy of YouTube Free Music Library. The tune is "Curb Stomp" by Underbelly
I show the type of K-1 kerosene that I use and is best for this stove. I also show the type of denatured alcohol that works great for preheating these stoves. Preheating with kerosene is a yucky, sooty mess - use denatured alcohol.
If you don’t like the loudness of these stoves and want it to run like the one in the video, you can get BernieDawg Dawg-A-Nova caps here (in the USA):
http://shpws.me/CBQZ
Or, here (in the EU):
https://i.materialise.com/en/shop/item/berniedawg-dawg-a-nova-for-nova-stoves
Please buy the original designs, not the copies, for best results and performance and to support independent designers like myself..
If you have more questions, consider dropping me an email where it is easy to share images and movies to: berniedawgstove@comcast.net
Intro/Outro tunes courtesy YouTube Audio Free Use Library. Artist: Magic in the Other, Tune: “Ready, Set, Go"
Questions? Contact BD at berniedawgstove@comcast.net
For the following: MSR XGK 9, XGK G, XGK GK, and XGK II... use the BernieDawg DragonTamer silent damper cap. You can order one here:
https://i.materialise.com/en/shop/item/dragontamer-3-silent-burner-cap-for-msr-dragonfly-stove in the EU
For the MSR XGK EX stove, use the XGK Dawg cap found here:
https://i.materialise.com/en/shop/item/xgk-dawg
For more about early MSR history go here:
msrgear.com/blog/evolution-msr-xgk-ex-stove
here:
en.wikipedia.org/wiki/Mountain_Safety_Research
or here:
msrgear.com/msr-origin-story.html
Intro/outro tune:
"Mean Streetz" by MK2 courtesy YouTube Free Use Audio Library
Watch as I take apart two Optimus 8R stoves in preparation for repairing/renovating the stoves so they will run great like they were intended.
Dental tools and all sorts of other great stove repair tools can be found at; widgetsupply.com
You can get fuel cap washers and SRV pips in the USA from eBay seller "spinnakerspar".
I also maintain a list of stove part suppliers at my blog page here: http://www.berniedawg.com/stove-part-supplier-links
Need specific help or help with sourcing parts? Drop me an email at:
bd@berniedawg.com
Jointed jet wrenches can be purchased from eBay seller: 40varga
Music from Free YouTube Audio Library:
"Live Worms" by Josh Lippi and the Overtimers
See the bands YouTube page at: youtube.com/user/joshlippi
Watch as I take apart two Optimus 8R stoves in preparation for repairing/renovating the stoves so they will run great like they were intended.
Dental tools and all sorts of other great stove repair tools can be found at; widgetsupply.com
You can get fuel cap washers and SRV pips in the USA from eBay seller "spinnakerspar".
Jointed jet wrenches can be purchased from eBay seller: 40varga
I also maintain a list of stove part suppliers at my blog page here: http://www.berniedawg.com/stove-part-supplier-links
Need specific help or help with sourcing parts? Drop me an email at:
berniedawgstove@comcast.net
Music from Free YouTube Audio Library:
"Live Worms" by Josh Lippi and the Overtimers
See the bands YouTube page at: youtube.com/user/joshlippi


