Install: CJM Vent Mount Gauge Pod with AEM X Series Extenders EVERYTHING cpo 2026-09-23 | Install: CJM Vent Mount Gauge Pod with AEM X Series Extenders
Golf R Maintenance Day! (Vacuum Oil Change, Spark Plugs, Tire Rotation, Air Suspension, Coolant) EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-09-22 | It was a maintenance day! I hope having you join me will provide you with tips if you want to do your own maintenance. I also share some things that I think most people do not think about, and the importance of knowing what fluids should be checked when the car is hot vs cold. Also a tidbit about liters vs quarts. Hope this helps someone.This is that fancy funnel I used: amzn.to/3PrY8Po
Tampa Offshore Bottom Fishing with Bait House Charters EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-09-17 | It was a fun four hour trip about 10 miles offshore from Clearwater, Florida. A few of us were broke off by a few larger fish, but we managed to land quite a variety!
Miami Beach - Labor Day - 2023 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-09-16 | Our Miami Beach Weekend distilled into a little over six minutes. A little fishing, food, and people/boat watching! This is how we do home movies. :-)
Dolphin Encounter on my Hobie Lynx Kayak in the Gulf of Mexico, Tampa Florida EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-08-27 | Nothing shuts down a morning a fishing like hanging out with a dolphin for an hour... lol I had fun anyway. My original plan was to target some nearshore reefs off of Coquina Beach on Anna Maria Island, but the dolphin had other plans...
A smart way to load and secure Hobie Lynx to kayak cart! EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-08-22 | This is my version of working smarter, not harder. Let's face it, a fully loaded kayak is sometimes tough to get properly loaded onto your cart. This is especially true when you are on the beach, tired, and alone. I can usually get the kayak "close" to properly positioned by myself....but I always end up having to tweak the alignment. That's a lot harder to do that you might think sometimes when you are doing it alone because you have to lift the kayak AND adjust the cart all at the same time. Then, sometimes you have to strap the cart to the kayak (which is expected, btw) or it will slip out of position. I find when I make turns to get around boardwalks or sidewalks, the wheels of the cart end up pointing diagonally, and then pulling the cart straight becomes problematic. This is my solution to all of that. This is how I load and secure my Hobie Lynx kayak to my Wilderness Systems Heavy Duty Kayak Cart with inflatable beach wheels. And before you say it... I started out with a cart that fits in the scupper holes and absolutely hated it. It was even more difficult to load on the beach because of the precision required to get the cart posts into the holes. There are a whole bunch of videos showing a hack to solve that problem, and I believe this is actually way simpler. And also, before you say it, I would load my scupper cart while the kayak was in the water... because the back of the kayak will float and it makes it easy to slip the cart underneath. That does not work so well with these big balloon beach tires! And if there is any heavy wave action at the beach, it's even worse! So, again... those are options, but I still find this to be a smarter solution that does not require a lot of strength or precision to pull off. It's way easier to lift the kayak an inch or two and pull the straps than anything else I have tried. If you have experienced any of the things I mentioned in the video, then hopefully this method will be useful for you. Wilderness Systems Heavy Duty Kayak Cart: amzn.to/3YKeXsY I have made some modifications to the cart that aren't really relevant to this (I don't think). Double sided cam buckle: amzn.to/44jZ5ie (came in a 2 pack)Straps... pick anything you like. I just use the ones that I strap the kayak to the car with. I'll probably cut them shorter if this ends up being all I use them for: amzn.to/44iOWlS
Hobie Lynx Fishing Tampa Bay - Spanish Mackerel, Trout, Catfish, and Ladyfish! HOT SUMMER DAY! EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-08-06 | Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com
Was I supposed to kill this fish? EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-07-29 | Spent a couple of hours and exactly one GoPro battery fishing the bridge at Longboat Pass this morning. A bucket of shrimp, a kayak, and a bridge are pretty much all I need to kill time picking on little schools of Mangrove Snapper. lol! But that last little fish I caught on the way back to the boat ramp has me confused. Did you see the way it opened its mouth and grabbed my pliers. It was like a snake. Maybe it was a snake head. I wasn't sure so I let it go. If I find out it is invasive (whatever it is) I'll definitely know better next time.
Low Profile AToM Race V2 Intake from Blaze Performance - GOFASTR EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-07-26 | Super huge shout out to Kumarin at Blaze Performance for the opportunity to work together on the development of this new low profile version of the AToM Race V2 Intake tray for the Volkswagen/Audi MQB platform! Here's the original install video: youtube.com/watch?v=Fl6JT1OmMnwHere's the hood install video:youtube.com/watch?v=mID7RtrdpFwHere's where I got my Blaze Performance AToM Race V2:eqtuning.com/collections/vw-audi/products/blaze-performance-atom-v2-air-intake-systemHere's the Blaze Performance website:blaze-performance.com
Hobie Lynx Anchor Trolley Kit Install! YakAttack LeverLoc with SuperYak Fishing Trolley Kit EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-07-11 | If you own a Hobie Lynx kayak, you know that you aren't supposed to screw anything into the hull.... so installing an anchor trolley presents a bit of a problem. Unless, that is, you have something like this kit from @SuperYakFishing that allows you to mount the @YakAttackKayakFishing LeverLoc trolley kit to your boat without screwing directly into the boat! I am so happy to get an anchor trolley installed! This is going to be VERY helpful! Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks!
Hobie Lynx H Rail Kit Installation - New Kit with Spacers EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-07-11 | The newer H-Rail kits come with two spacers for the rear end fittings. Make sure your kit has them, and if not, get some before you start the install. The patented Hobie H-Rail system's extruded aluminum dodecagon rail provides a strong and corrosion resistant mounting platform to effortlessly mount more gear in more places.It's a very useful install, that adds only a small amount of weight to this ultra-light kayak. If you are using this for fishing, I consider the H-Rail kit a must have item. hobie.com/accessories/h-railPlease SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks!
Fishing Longboat Pass Bridge from a Hobie Lynx Kayak - Florida EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-07-08 | I'm learning to fish salt water, from a kayak. I'm having a blast! I'm finding that any fish from a kayak is fun! Eventually I get into something bigger, but for now, I am just working through the process. I caught several species of fish in the couple out hours I was out on the water. Can you help me identify them? I know they are mostly babies... but I'd still like to know what I caught. I learned this method from the guys over at @Saltstrong. They did a livestream showing how to fish bridge pilings with live shrimp. I followed their recipe... and it worked great!Here is what I was using:Size 1 Eagle Claw Standard Shank hook (J-hook)1/4 ounce bullet weightLeader was 20 pound monofilamentMain line was 10 pound braid. Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks!
BerleyPro Bumper Bro Keel Guard Installation EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-07-06 | Okay. Embarrassingly, I had to do the installation twice. Hopefully this helps someone who might be interested in protecting a specific part of their keel. You can learn from my mistakes. The Bumper Bro is a kayak keel guard that is designed to be mounted to the front of your kayak to avoid damaging it with deep gouges or scratches when landing and launching.You can get them off Amazon (amzn.to/3O39Osi) or any place that sells BerleyPro products (including berleypro.com). Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com
BerleyPro Visor Install for Lowrance HDS Live Fishfinder EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-06-30 | The BerleyPro Lowrance HDS Series Visors are the only shade on the market specifically designed to fit your HDS series Fishfinder/Chartplotter range. They are light-weight, strong, sturdy, and super easy to install on your unit for maximum benefits.berleypro.com/product/lowrance-hds-visorsThe visors provide added protection from the elements such as rain, waves, and glare. By reducing the amount of water on the screen you can spend less time cleaning it and more time fishing! It will also improve your touch screen usage and protect your card slots.By reducing glare it makes the screen more visible so you can see the fish or contours you are following. Reduce the brightness to save battery life and reduce the temperature of your unit; improving its running performance and avoiding shutdowns.Night-time boating is also improved by shielding your windscreen from the lights of the unit, making it much safer to commute at night.Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com
Kayak Fishing with Radley - First Trip EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-06-15 | I took Radley out on the new kayak for the first time... I think he really enjoyed hanging out with me on the water.
CJM AIRLIFT 3P/3H LOWER CUBBY MOUNT : 2019 GOLF R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-05-02 | This video is a bit of an intermission between part one and two of the Airlift Performance air suspension system on my 2019 Golf R. I needed to mount my controller, and the CJM Industries lower cubby mount was the perfect solution. I also took the time to redo my cellphone charger while I was in there. I was most curious if I was still able to use my wireless CarPlay adapter with this mount setup, and I am happy to report that I am! Here's the link to the mount: cjmind.com/products/mk7-7-5-golf-gti-r-lower-cubby-pod-airlift-mount-2015-2020?_pos=1&_sid=f4e610aaf&_ss=rPlease SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com
PART ONE: AIRLIFT PERFORMANCE INSTALL MK7.5 GOLF R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-04-29 | This video covers the top half of the installation of the Airlift Performance kit on my 2019 Golf R. Here is the breakdown of the kit:AIRLIFT-78522 Performance Front Kit 2019 Volkswagen Golf R Base AWD AIRLIFT-78664 Performance Rear Kit 2019 Volkswagen Golf R Base AWD AIRLIFT-27793 Air Lift PerformanceAir Lift Performance 3H Kits (1/4" Air Line | 5 Gallon Lightweight Polished Aluminum Tank | VIAIR 444C Compressor)Here are the billet aluminum clamps I used for the tank mounting:amzn.to/3AEUj2k (I got 1" for my strut bar)Here are the accessory clamps I used for the water filter:amzn.to/44aPOdo (I got 1" for my strut bar)
Over One Year Later: Compression Testing and Spark Plug Swap! EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-04-19 | Let's see how healthy the engine is as I swap spark plugs. I'm also changing brands.... Original Compression Test Video:youtu.be/Bs3EbZzlEMoOriginal Spark Plug Gap Video:youtu.be/290FVqLq-bcEQT Coil Grounding Kit Video:youtu.be/i7tztwCPfSs
AToM Race V2 Intake Install - 2019 Golf R - Blaze Performance EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-04-14 | Nothing ever goes as planned for me with this car, lol! The AToM V2 intake from Blaze Performance seems awesome, and I am 100% happy I bought it. I just wish my hood didn't get in the way of how the intake was originally designed. Such is life. Solve the problem, and move on. That's my mantra. Here's the hood video for those interested in it:youtube.com/watch?v=mID7RtrdpFwHere's where I got the intake:eqtuning.com/products/blaze-performance-atom-v2-air-intake-system
MTB - Inception - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-13 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB - Canyon with Mount Boyette - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-13 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB- Gator Pit - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-13 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB - Nemesis and Loch Ness - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-13 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB - Golf Cart - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-13 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB - Spider Berm - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-13 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB - Ridgeline - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-13 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB - North Abyss - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-13 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB - Pandemonium 3,2 - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-12 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB - South Abyss - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-12 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
MTB - Big Drop - Balm Boyette - 2-11-23 EVERYTHING cpo (@Vaarticus; @go.fast.r) 2023-02-12 | This is a MTB ride-a-long video. Curious about trail conditions, or want to see a trail before attempting it for the first time? This is the video for you. If you are looking for a show-off video, you'll be bored. :-) I will be uploaded trail videos from today's ride. There are a few. Balm Boyette Scrub Preservenear Lithia, FLFebruary 11, 2023
PDC 12K Mega Twill Carbon Fiber Hood Install - 2019 Golf R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-12-13 | This is the installation of my new MEGA WEAVE carbon fiber hood from Premium Deutch Carbon. premiumdeutschcarbon.com
Turbo Levo E Bike DIY Floor Stand EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-08-15 | Here's the bar I am using for this, but there are probably a bunch of options you can source locally. I originally used a steel bar I got from Home Depot. The chrome finished bar I am using now is a lot nicer and easier to slide through the bottom bracket. Here is the link: amzn.to/3w8Kp7kPlease SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com
Fixed! Intake Manifold Runner Stuck Closed (P2006/P2015) EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-08-08 | Last week, I had a check engine light come on after accelerating pretty heavily to merge into traffic. The code was P200600 and P201500. Both are related to an Intake Manifold Runner problem, specifically that it was "stuck closed". This video is a quick session showing how it works, my troublshooting method, and then how I solved this issue by using a part from another intake manifold I had in the garage. When the manifold is "stuck closed" it is because there is a spring in the intake manifold runner control (IMRC) that is forcing it closed. This is the normal position below 3,800 RPM. At 3,800 RPM, the solenoid under the intake manifold will open and allow vacuum to open the manifold runner. Then below 3,800 RPM the vacuum is closed back off and the spring closes the runner. So if the runner is "stuck closed" it's very highly likely that there is not sufficient vacuum to open it when it is commanded by the ECU. This also throws off the position sensor because it isn't seeing the proper range for an open runner (because it doesn't actually open). Anyway... I hope you find this video helpful! Thanks for watching.
A few minutes of Florida Mountain Biking EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-07-24 | Alafia Florida Mountain Biking July 2022 - Gen3 2022 Specialized Turbo Levo Comp CarbonPlease SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com
EcoHitch Hidden Trailer Hitch Receiver Install - 2019 Golf R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-07-07 | EcoHitch Hidden Trailer Hitch Receiver - 2":Item # 306-X7332etrailer.com/Trailer_Hitch/EcoHitch/306-X7332.htmlThis custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.Features:Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicleHidden cross tube provides a clean, from-the-factory lookEasy, bolt-on installation - no drilling or welding requiredSturdy, lightweight alloy constructionAlloy is made of recycled materials and combines aluminum, steel, and stainless steelBlack powder coat finish offers superior rust protectionMeets SAE J684 towing safety regulationsMade in the USASpecs:Receiver opening: 2" x 2"Maximum gross trailer weight: 2,000 lbsMaximum tongue weight: 300 lbsNot rated for weight distribution systemsLimited lifetime warranty2″ Super Duty Single Bike Rack from 1UP USA:1up-usa.comFits 2” receiverSlot for standard hitch pin holesRack weight: 28 lbIncrease bike capacity to 3 bikes max with additional Add-Ons (sold separately)Total carrying capacity of up to 225 lb (75 lb per bike spot) due to added support bar under trayFits 16” – 29” wheels, up to 3.1” wide (see spacer kit for tires wider than 3.1”)Rated for off road useRated for RV and travel trailer use, 2 spots maximumAccommodates up to 54” wheelbaseHitch bar has built-in anti-wobble mechanismRapid tilt and folding mechanism for smaller footprintRack arms close to secure tires without touching the frameShips in reusable box for easy storage (30” X 14” X 8”)Shipping weight: 33 lbCompatible with the Standard and Super Duty Add-Ons (sold separately)All rack parts anodized, except a powder coat finish on the trays
Van der Veer Haldex Controller Installation and Overview - 2019 Golf R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-06-18 | Here's the installation and overview of settings and configuration. Website: haldexcontroller.com/nl/products/haldex-controller/haldex-controller-overview
DSG Launch Logging - Clutch Behavior - 2019 Golf R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-06-09 | This one was by request. Anything of interest to you?Logs: Auto Modedatazap.me/u/vaarticus/log-1654391986?log=0&data=12-49-51-52-54&zoom=20-124&mark=10Manual Modedatazap.me/u/vaarticus/log-1654391986?log=1&data=12-49-51-52-54&zoom=20-124&mark=10Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.comMusic: Consinity. ET.
DSG Myth Busting! EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-06-02 | I thought I would share this information after a commenter on one of my previous videos shared his opinion that sitting at a stop with the car in Sport mode will prematurely wear out the DSG clutches... Here's what happens with the clutches while stopped while the transmission is in Sport, Normal, Manual, and Neutral.
APR Dogbone (Pendulum Mount) install on 2019 Golf R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-05-28 | This is the install of the APR Pendulum Mount on my 2019 Golf R.
Fuel Line Upgrade Tips - EQT Braided -6 AN EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-05-20 | My installation of the soon-to-be-released -6 AN nylon braided fuel line from EQT. This runs from the LPFP to the ethanol sensor. Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com
Gapping my Slant Ground Spark Plugs (Non-Projected Electrode) EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-05-16 | So I know someone will mention that you can put the feeler gauge in place, and then screw the ground strap down to the electrode and be done, with no risk of going to far. While that does ensure you can’t accidentally screw it down too far, my experience has been that it doesn’t actually end up set where the feeler gauge is. The ground strap seems to spring back a bit after you loosen the screw. I suppose you could go a feeler gauge thinner and it will work out in the end, but I honestly just find it works just fine the way I do it in this video. So that’s the way I do it.
Open Source Logging with SimosTools (OS Tuning Software) MK7 Golf R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-05-12 | I’m just dipping my toes into the Open Source tuning world… and starting out very slowly by just looking at the logging options that I can do while retaining my existing custom tune. Please let me know if you are doing open source tuning, and how it is working out for you!Here is the github page for SimosTools: github.com/Switchleg1/SimosToolsSimosTools on the Google Play Store: play.google.com/store/apps/details?id=com.app.simostoolsUnfortunately the Macchina A0 has been difficult to find lately, so switchleg (the SimosTools developer) has put together a clone that can be built... That's what I have. I had someone build me one. github.com/Switchleg1/AMAlegHere is the tablet I am using. It’s working out well for a budget tablet. amzn.to/3Ll2ljXThis is the cheap but very effective rugged case I have for it. I think it’s gone up in price since I bought it. amzn.to/3FEjQdCI got the rugged case so I can throw the tablet in the seat or the glovebox without worrying about messing it up.
Autocross May 1, 2022 | Ft. Meyers, FL | Gulf Coast Autocrossers | 2019 VW Golf R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-05-01 | Just a quick lap from today’s autocross event, for your viewing pleasure. I haven’t been very good at sharing racing footage. I will try to throw some up from time to time.
MQB Intake Manifold Swap - Preparing for MPI Installation EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-04-29 | In this video, I am covering my swap of the factory North American version of the intake manifold for an International version which was provisioned for MPI (multiport injection). I could have modified my factory manifold, but I decided to just swap it out. The removal and installation was pretty easy, but I did not have the front bracket that may make it more difficult. Anyway, the trick I found to getting the manifold in and out easily was to remove the oil filter. That gave just enough room to ease the manifold out. If I didn’t do that, it looks like I would have had to loosen or remove the hard fuel line that feeds the direction injection fuel injectors from the HPFP (high pressure fuel pump). If you need any torque values or have any questions, please just let me know in the comments and I’ll do my best to help you out.
Big Turbo EQT Custom Tuning DYNO DAY! EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-03-30 | So the new EQT G25-660 turbo is in. All of the supporting mods are done (well… mostly… as you’ll hear about in the video) so it’s time to get that custom tune done! I rented time over at Powertech Performance and scheduled a live tuning session with Ed Susman over at Equilibrium Tuning. Here’s how it went. Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks!
Fixing my leaky turbo! EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-03-29 | So this is a quick video to show you where my newly installed turbo was leaking from, and how I fixed it.
MK7 Turbo Install - EQT - G25 660 - 2019 Golf R EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-03-11 | This turbo installation is very similar to other turbos based off of the Garrett platform, such as the CTS BOSS series. This was my first turbo swap, so I definitely learned a lot. I hope this helps others.
How to do a Wastegate Actuator Bench Calibration and Adaptation (MK7/IS20/IS38) EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-03-04 | I wanted to set my wastegate actuator voltage BEFORE putting the turbo in the car so I didn't have to worry about access to the adjustment rod. Here is the process. This process is most useful when you want/need to calibrate the wastegate to a turbo, but might not have the car readily available or don't want to take it out to the car for the calibration process... or you don't want to put the car back together to turn on the ignition... lol Lots of reasons why this could be useful. There ARE other ways to calibrate a wastegate actuator. This is the bench method.
IS38 Turbo Removal MK7 2019 Golf R - From the Top! EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-03-02 | In this video, I share my experience with the topside removal of my IS38 turbo from my 2019 Golf R.Carbyne Tools on Amazon: amzn.to/3hwg4b0
Pre-Turbo Swap Inventory. Making sure I have everything I need. EVERYTHING cpo (@Vaarticus; @go.fast.r) 2022-02-19 | So, it's about that time! I am going to finally be getting that turbo upgrade done. This week! I wanted to get all of my parts together to make sure I had everything. See anything I missed? Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks!
