Uploaded December 2020 | Updated September 2026, 1 week ago

---

Maiden flight of the ZMR835, turns out quite good! The C of G turned out to be as built. 75% aileron throw, 50% elevator. Ground handling would be improved by putting a tail wheel instead of the skid. Landing gear is not very secure, needs stiffening up with a cross brace. 1500 mAh 3S battery flight times around 7 minutes in this test, probably in "normal" flight 10 minutes.

Original build video here : youtu.be/Y47HzUY_J0Q


🛒 ZMR835 835mm Wingspan Balsa Ply Wood RC Airplane KIT tinyurl.com/ZMR835Kit
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 Good source of electronic parts: bit.ly/ElecComps
👍 Follow on Facebook facebook.com/1nformatica

💲 If you would like to buy me a coffee: paypal.me/1nformatica

DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica