Lathe Backstop @homemetalworkingworkshop3365

Lathe Backstop

Home metalworking workshop 2017-01-31 | Backstop for the lathe.

To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page92.html

Depth Gauges

Home metalworking workshop 2017-09-12 | Project for an Afternoon
Depth Gauges

To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page116.html

Faceplate dogs

Home metalworking workshop 2017-09-12 | Project for an afternoon
Faceplate Dogs
To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page276.html

Saddle Stop

Home metalworking workshop 2017-09-12 | Project for an afternoon
Saddle Stop
To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page152.html

Marking Out Gauge

Home metalworking workshop 2017-09-12 | Project for an afternoon.
Marking out gauge
To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page73.html

Making Square Collets, the easy method

Home metalworking workshop 2017-09-12 | Project for an afternoon
SquareCollets
To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page75.html

Lathe Centre Finder

Home metalworking workshop 2017-09-12 | Project for an afternoon
Lathe Centre Finder
To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page115.html

Drill Sharpening using the four facet method

Home metalworking workshop 2017-03-11 | Drill sharpening using the four facet method.

For an introduction to my grinding rest used in this video, click on the following youtube.com/watch?v=n3Z-si383uM

To visit my webpage relating to this video, click on the following.
http://homews.co.uk/page360.html

Grinding Rest Wheel Dressing

Home metalworking workshop 2017-03-11 | Dressing a grinding wheel for sharpening metalworking and woodworking cutting tools.

For an introduction to my grinding rest used in this video, click on the following youtube.com/watch?v=n3Z-si383uM

Slitting Saw Sharpening

Home metalworking workshop 2017-03-02 | Method for sharpening metalworking slitting saws

For an introduction to my grinding rest used in this video, click on the following youtube.com/watch?v=n3Z-si383uM

To visit my webpage relating to this video click on the following
http://homews.co.uk/page234.html

Dovetail Cutter Sharpening

Home metalworking workshop 2017-03-02 | Sharpening both cutting edges of a Dovetail Cutter.

For an introduction to my grinding rest used in this video, click on the following. youtube.com/watch?v=n3Z-si383uM

To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page224.html

Endmill Sharpening

Home metalworking workshop 2017-02-26 | Sharpening both the end and side cutting edges of an endmill
For an introduction to my grinding rest used in this video, click on the following. youtube.com/watch?v=n3Z-si383uM

To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page224.html

End Mill Sharpening

Home metalworking workshop 2017-02-26 | Method for sharpening an end mills end cutting edges.

For an introduction to my grinding rest used in this video, click on the following youtube.com/watch?v=n3Z-si383uM

To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page224.html

Lathe Boring tools, shaping and sharpening

Home metalworking workshop 2017-02-20 | Lathe Boring tools, shaping and sharpening

For an introduction to my grinding rest used in this video, click on the following youtube.com/watch?v=n3Z-si383uM

To visit my webpage relating to this video click, on the following.
http://homews.co.uk/page237.html

Lathe KnifeTool Sharpening

Home metalworking workshop 2017-02-20 | Sharpening a Lathe KnifeTool.

For an introduction to my grinding rest used in this video, click on the following youtube.com/watch?v=n3Z-si383uM

To visit my webpage relating to this video click on the following
http://homews.co.uk/page224.html

Grind Rest Introduction

Home metalworking workshop 2017-02-16 | Grinding rest for sharpening metal and wood working workshop tools. Workshop Project.

To visit my webpage relating to this video, click on the following http://homews.co.uk/page145.html

Milling Cutter Chuck

Home metalworking workshop 2016-11-14 | Home Workshop project. Milling Cutter Chuck for both threaded and plain shank cutters. To visit my webpage relating to this video click on the following http://homews.co.uk/page423.html

Tool Makers Clamps.

Home metalworking workshop 2016-10-30 | Tool makers clamps. making and using. Also includes, details regarding clamps which have both clamping screws on the same side. These have uses which are not possible with the common clamps but they are not widely available commercially. To visit my webpage relating to this video click on the following http://homews.co.uk/page260.html

Lathe Milling Head

Home metalworking workshop 2016-10-23 | Home Workshop Project. A Milling Head for the lathe. Can be made using just a lathe and drilling machine. To visit my webpage relating to this video click on the following http://homews.co.uk/page158.html

Tapping Stand

Home metalworking workshop 2016-10-16 | Home Workshop Project. Tapping Stand with automatic feed to suit the pitch of the thread being made. To visit my webpage relating to this video click on the following http://homews.co.uk/page41.html

RotaryTable

Home metalworking workshop 2016-09-10 | Home workshop project. Hand driven rotary table, that is, having no worm/wormwheel reduction gears and rotated directly using an arm from the side of the table. Also has, 24 direct divisions. To visit my webpage relating to this video click on the following http://homews.co.uk/page462.html

QCTHMk2a

Home metalworking workshop 2016-08-09 | Quick Change Lathe toolholder. Home Workshop Project. A simple design which is easy to make in the home workshop and very accurate as this video shows. To visit my webpage relating to this video click on the following http://www.homews.co.uk/page508.html

Soft Jaws for the Three Jaw Chuck

Home metalworking workshop 2016-07-20 | Home Workshop Project. This Video shows briefly my method of producing Soft Jaws for the Three Jaw Chuck and the theory behind the shape of the teeth. To visit my webpage relating to this video click on the following http://homews.co.uk/page99a.html

Dividing Head.full function

Home metalworking workshop 2016-07-19 | Dividing Head which, using the lathes changewheels, has a range of worm/wormwheel ratios. This results in more divisions being available compared to a semi universal dividing head.
Home Workshop Project. To visit my webpage relating to this video click on the following http://www.homews.co.uk/page137.html

Dial EngravingTool

Home metalworking workshop 2016-07-19 | Dial Engraving Tool which automatically sets each line length avoiding the need to use the lathe's leadscrews calibration for each line. Home workshop project.To visit my webpage relating to this video click on the following http://homews.co.uk/page315.html

Small Boring Head

Home metalworking workshop 2016-07-19 | Boring head for use on a smaller milling machine. Home workshop project. To visit my webpage relating to this video click on the following http://homews.co.uk/page199.html

Self Setting Parallels for the Drilling Vice

Home metalworking workshop 2016-07-19 | Self positioning parallels for the Drilling vice. Avoids them moving, or falling over, whilst drilling is taking place. Home Workshop Project.
To visit my webpage relating to this video click on the following http://homews.co.uk/page147.html

Low Profile Clamps.

Home metalworking workshop 2016-07-19 | Clamps, primarily, for securing shallow parts on the milling machine table. Home Workshop Project To visit my webpage relating to this video click on the following http://www.homews.co.uk/page108.html

Accessories for a dial indicator and other uses

Home metalworking workshop 2016-07-19 | Accessories for use with a dial indicator/dial test indicator, but with many other uses. Typically, Instrument makers vice, Heavy duty helping hand and Machine guard support. Home Workshop Project. To visit my webpage relating to this video click on the following http://homews.co.uk/page408.html
I have added to my website details for making the accessory which enables tests to be carried out on concealed surfaces. Seen midway through the video, also mid front of the opening picture. For this, click on the following http://homews.co.uk/page619a.html

Faceplate Balancing Fixture.

Home metalworking workshop 2016-07-19 | A free running faceplate fixture which enables a more accurate balance to be achieved than can be obtained whilst on the lathe. Can also be used horizontally making it easier to add parts to the faceplate. Home Workshop Project. To visit my webpage relating to this video click on the following http://homews.co.uk/page151.html

High Profile Clamps for the milling machine.

Home metalworking workshop 2016-07-18 | Multi purpose clamps for use on the milling machine table. Especially, though not exclusively, useful for parts too long for the machine vice .Home Workshop Project. To visit my webpage relating to this video click on the following http://www.homews.co.uk/page127.html

Faceplate and Angleplate Workpiece Clamps

Home metalworking workshop 2016-07-18 | Compact workpiece clamps for use on an angleplate or faceplate. Home workshop project. To visit my webpage relating to this video click on the following http://homews.co.uk/page39.html

Engineers Sash Clamps

Home metalworking workshop 2016-07-18 | Multi use clamps for the metalworking workshop, similar to woodworkers Sash Clamps, but smaller and more robust. Home Workshop Project. To visit my webpage relating to this video click on the following http://homews.co.uk/page212.html

End Mill Sharpening Fixture

Home metalworking workshop 2016-07-18 | A simple fixture for use on the off hand grinder to sharpen the end cutting edges of an endmill. Easy to make, and use, in the homeworkshop. Home Workshop Project. To visit my webpage relating to this video click on the following http://homews.co.uk/page121.html

Four Jaw Chuck, an alternative

Home metalworking workshop 2016-07-18 | A four jaw chuck which will do all that a conventional chuck will do and much more. Also, having a greater capacity than a similar size conventional chuck. Can also be used as a heavy duty, tee sloted, face plate. Home workshop project. To visit my webpage relating to this video click on the following http://homews.co.uk/page211a.html

QCTHMk2

Home metalworking workshop 2016-07-17 | Quick Change Lathe Toolholder.
Home Workshop Project. A simple design which is easy to make in the home workshop, and very accurate as this video shows .

Basic Dividing Head

Home metalworking workshop 2016-04-10 | Dividing head for construction in the home metalworking workshop. Drawings and construction methods available. To visit my webpage relating to this video click on the following http://homews.co.uk/page132.html